FASTENERS. Self-Drilling Screws Made In USA. Product Line THE. Selecting the Length of the Drill Point. Product Description
|
|
- Bryan Maxwell
- 7 years ago
- Views:
Transcription
1 Self-Drilling Screws Made In USA Product Description Self-drilling fasteners eliminate separate drilling and tapping operations for faster, more economical installations. Tanner Bolt & Nut Corp. offers the most complete selection of selfdrilling fasteners made in the United States by Parker-Kalon and Elco. Advantages Save Time and Money - Eliminate separate drilling and tapping operations for faster, more economical installations. Starts Exactly Where It Is Placed State of the art forging process technology and tooling produced to strict specifications provide a sharp, clean and consistent drill point. Broad Selection of Sizes and Applications A wide variety of head styles and drive systems are available to meet specialized application and installation demands. Self-drilling screws are available to penetrate thin sheet metal through 1/2" thick steel. Selection of Finishes Screws are provided zinc plated with clear chromate finish. When noted, screws are also available with Stalgard corrosion-resistant coating which provides 800 hours of salt spray resistance. Recommended RPM for Power Tools SCREW SIZES RPM #6 - # #12-5/ Tanner Tip Recommended DEWALT Power Tools for Self-Drilling Screws: DW268 - Page 117 DC825KA - Page 126 DC827KL - Page 126 Applications: Selecting the Length of the Drill Point It is important that the correct point length is selected with selfdrilling screws, because drilling and tapping operations should not occur simultaneously. For optimum performance, the drilling operation must be completed and the lip of the drill point must have fully penetrated the material before thread engagement begins or the result is a stall-out or point burn-up. How to Measure Material Thickness Material Thickness Material Thickness.100 Material Thickness.125 Airspace.025 Material Thickness Guidelines POINT SCREW MATERIAL SIZE SIZE THICKNESS Overall thickness.035" -.110" #2 # #2 # #2 # Overall thickness.110" -.210" #3 # #3 # #3 # #3 5/16" Heavy duty applications.187" -.500" #4 #12-1/4" #4.5 # #5 #12-1/4" Electrical Glazing Metal Lath Sheet to Structural Sheet to Structure Sheet to Sheet 2 To Order Please Call: Fax: Fax: To Order On-Line: To Order By sales@tannerbolt.com
2 Self-Drilling Screws Made In USA Why buy self-drilling screws that are made in the USA? Available in a wide variety of head styles and drive systems to meet specialized application and installation demands. Registered head markings are your assurance of a commitment to quality and traceability. Better thread engagement and holding power are achieved by this product, which self drills its own optimum hole size. Threads are designed specifically for construction applications. Engineered and manufactured from high quality cold heading material. Heat-treating under controlled conditions yield a high quality product. Wide variety of point styles and point geometries for optimum performance in a specific material thickness. State-of-the-art forging process technology and tooling produced to strict specs provide a sharp, clean and consistent point. Test after test, self-drilling screws made in the USA stand out as the superior performer over imported competition as the results below show X1 HWH #3PT 1/4-20X3/4 HWH #2PT 10-16X3/4 HWH #2PT AVG DRILL SLOW/ AVG DRILL SLOW/ AVG DRILL SLOW/ TIME (sec) NO DRILLS TIME (sec) NO DRILLS TIME (sec) NO DRILLS Dril-Kwick 2.02 Zero 1.61 Zero 1.52 Zero Foreign Competitor 3.55 Seven 4.95 Four 4.61 Eleven 2500rpm 2500rpm 2500rpm Hex Washer Head Zinc Plated 6N37UHWZ/USA # 6 x 3/8" # N50UHWZ/USA # 6 x 1/2" # N75UHWZ/USA # 6 x 3/4" # N50UHWZ/USA # 8 x 1/2" # N75UHWZ/USA # 8 x 3/4" # N100UHWZ/USA # 8 x 1" # N125UHWZ/USA # 8 x 1-1/4" # N150UHWZ/USA # 8 x 1-1/2" # N50UHWZ/USA # 10 x 1/2" # N75UHWZ/USA # 10 x 3/4" # N100UHWZ/USA # 10 x 1" # N125UHWZ/USA # 10 x 1-1/4" # N150UHWZ/USA # 10 x 1-1/2" # N200UHWZ/USA # 10 x 2" # N75UHWZ/USA # 12 x 3/4" # N100UHWZ/USA # 12 x 1" # N125UHWZ/USA # 12 x 1-1/4" # N150UHWZ/USA # 12 x 1-1/2" # N200UHWZ/USA # 12 x 2" # N75UHWZ/USA # 14 x 3/4" # N100UHWZ/USA # 14 x 1" # N125UHWZ/USA # 14 x 1-1/4" # N150UHWZ/USA # 14 x 1-1/2" # N200UHWZ/USA # 14 x 2" # N250UHWZ/USA # 14 x 2-1/2" # N300UHWZ/USA # 14 x 3" # N400UHWZ/USA # 14 x 4" # /16 Diameter Hex Washer Head 31C100UHWZ/USA 5/16-18 x 1" # C125UHWZ/USA 5/16-18 x 1-1/4" # C150UHWZ/USA 5/16-18 x 1-1/2" # To order carton quantities, please add the word "BULK" to the end of the Item Code. Pan Phillips Head Zinc Plated 6N37UPPZ/USA # 6 x 3/8" # N50UPPZ/USA # 6 x 1/2" # N75UPPZ/USA # 6 x 3/4" # N100UPPZ/USA # 6 x 1" # N50UPPZ/USA # 8 x 1/2" # N75UPPZ/USA # 8 x 3/4" # N100UPPZ/USA # 8 x 1" # N50UPPZ/USA # 10 x 1/2" # N75UPPZ/USA # 10 x 3/4" # N100UPPZ/USA # 10 x 1" # N150UPPZ/USA # 10 x 1-1/2" # To order carton quantities, please add the word "BULK" to the end of the Item Code. Oval Phillips Head Zinc Plated 6N100UOVZ/USA # 6 x 1" # N125UOVZ/USA # 6 x 1-1/4" # N75UOVZ/USA # 8 x 3/4" # N100UOVZ/USA # 8 x 1" # N125UOVZ/USA # 8 x 1-1/4" # N100UOVZ/USA # 10 x 1" # N125UOVZ/USA # 10 x 1-1/4" # To order carton quantities, please add the word "BULK" to the end of the Item Code. Hex Size for Hex Washer Head Screws NOMINAL SIZE HEX SIZE NOMINAL SIZE HEX SIZE #6 1/4 #8 1/4 #10 5/16 #12 5/16 #14 3/8 5/16 1/2 Please see P128 and P130 for Impact Drivers Accessories, Phillips Bits and Magnetic Nutsetters 4302 Glenwood Rd. Brooklyn, NY Fax: Fax:
3 Self-Drilling Screws Made In USA Wafer Phillips Head It all Happens in One Operation; Winged drill screws are designed to drill first into wood and then steel. The wings drill a clearance hole into the wood to allow the threaded section to follow behind. The wings break off upon contact with the steel The core drill point drills through the steel The screw continues threading into the steel and fastening the assembly Tanner Tip See Page 117 for DEWALT DW267 Versa-Clutch Screwdriverperfect for #4 and #5 point self-drilling screws! Wafer Phillips Head For Wood-to-Steel Applications 10C143UWSZ/USA # x 1-7/16" # /4" - 3/4" Wood or Plywood to Steel Framing ( " thick) 12C162UWSZ/USA # x 1-5/8" # /4" - 1" Wood or Plywood to Steel Framing ( " thick) Flat Phillips Head For Wood-to-Steel Applications 12C200UWSZ/USA # x 2" # /4" - 1-3/8" Wood or Plywood to Steel Framing ( " thick) 12C250UWSZ/USA # x 2-1/2" # /4" - 1-5/8" Wood or Plywood to Steel Framing ( " thick) 25C275UWSZ/USA 1/4-20 x 2-3/4" # /4" - 2" Wood or Plywood to Steel Framing ( " thick) Wood-to-steel stocked zinc plated. Available with Stalgard coating which provides 800 hours of salt spray resistance. To order carton quantities, please add the word "BULK" to the end of the Item Code. 4 Hex Washer Head Specially designed drill points handle the toughest applications. This line of heavy-duty drill screws is designed for steel applications up to 1/2" thick. Ideal for attaching metal deck, clips, linear panels and accessories to structural steel or bar joist. Longer length fasteners can be used to retrofit clip and sheet applications. Available zinc plated, Stalgard or Climaseal finish. Also available with bonded neoprene washers for weather-tight sealing applications. Installation for #4 & #5 Point Screws A standard screwdriver with a depth sensitive nosepiece should be used to install heavy-duty self-drilling screws. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have a RPM range of (Maximum of 1800 RPM is recommended for #5 point screws.) Adjust the screw gun nosepiece to properly seat the fastener. New magnetic sockets must be correctly set before use. Remove chip build-up as needed. The fastener is fully seated when the head is flush with the work surface. Overdriving may result in torsional failure of the fastener or stripout of the substrate. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread. To Order Please Call: Fax: Fax: To Order On-Line: To Order By sales@tannerbolt.com Hex Washer Head Heavy Duty Applications - Stalgard /Climaseal Finish ELC EDC801 # x 7/8" # ELC EDC816 # x 1-1/4" # ELC EDC836 # x 1-1/4" # ELC EDC846 # x 1-1/2" # ELC EDC861 # x 1-1/2" # ELC EDC881 # x 2" # ELC EDC901 # x 3" # F300UHW5Z/USA 1/4"-28 x 3" # F400UHW5Z/USA 1/4"-28 x 4" # F500UHW5Z/USA 1/4"-28 x 5" # F600UHW5Z/USA 1/4"-28 x 6" # F800UHW5Z/USA 1/4"-28 x 8" # 5-15 Drilling Capacity Point Size #4 #4.5 #5 Maximum Thickness 5/16 3/8 1/2 To order carton quantities on Item Codes beginning with ELC, add BULK to the code, e.g. ELC EDC801/BULK. When ordering carton quantities on Item Codes beginning with 25F, add BULK to code, e.g. 25F300UHW5Z/USABULK. 1/4 Diameter Deck Fasteners/Drill Screws For Thicknesses Stalgard Finish ELC EFC886 1/4-14 x 5" #5-500 ELC EFC896 1/4-14 x 6" #5-500 ELC EFC926 1/4-14 x 8" #5-300
4 Dril-Flex Structural Self-Drilling Screws Product Description Dril-Flex fasteners are specially designed and processed to help prevent hydrogen-induced embrittlement failures. Each fastener undergoes a unique dual-hardening process to ensure the optimal combination of ductility and hardness required for maximum performance in the field. Distinctive circled Elco logo headmarking Stalgard finish provides corrosion resistance Finish: Silver-coated Stalgard corrosion resistant finish withstands a minimum of 800 hours salt spray per ASTM B117 standards. Approvals: ICBO Evaluation Report No Advantages Lower-hardness (HRC 28-34) load-bearing section provides ducility Higher-hardness (HRC min.) drill point and lead threads for reliable drilling Provides the same high resistance to hydrogenassisted failure as a Grade 5 fastener. Dual hardened fastener with self-drilling point and self tapping thread. Ensures consistent, reliable drilling and tapping. Eliminates separate drilling and tapping operations. Silver-coated Stalgard corrosion resistant coating is superior to zinc or cadmium-based finishes. Can be used in applications with dissimilar materials. Dril-Flex Hex Washer Head ITEM SIZE PT BOX ITEM CARTON SIZE ELC EAF430 #10-16 x 3/4" #3 100 ELC EAF430/BULK 6000 ELC EAF621 #12-14 x 7/8" #3 100 ELC EAF621/BULK 5000 ELC EAF641 #12-14 x 1" #3 100 ELC EAF641/BULK 4000 ELC EAF681 #12-14 x 1-1/2" #3 100 ELC EAF681/BULK 2500 ELC EAF690 #12-14 x 2" #3 100 ELC EAF690/BULK 2000 ELC EAF755 #12-24 X 1-1/2" #5 100 ELC EAF755/BULK 2500 ELC EAF816 1/4"-14 x 1" #3 100 ELC EAF816/BULK 3000 ELC EAF841 1/4"-14 x 1-1/2" #3 100 ELC EAF841/BULK 2000 ELC EAF846 1/4"-14 x 2" #3 100 ELC EAF846/BULK 1500 ELC EAF865 1/4"-20 x 1-1/8" #4 100 ELC EAF865/BULK 2500 ELC EAF876 1/4"-20 x 1-1/2" #4 100 ELC EAF876/BULK 2000 ELC EAF886 1/4"-20 x 2" #4 100 ELC EAF886/BULK 1500 ELC EAF888 1/4"-20 X 1-1/2" #5 100 ELC EAF888/BULK 2000 ELC EAF890 1/4"-20 x 2-1/2" #4 100 ELC EAF890/BULK 1000 ELC EAF960 5/16"-24 x 1-1/2" #3 100 ELC EAF960/BULK 1000 Dril-Flex Flat Phillips Undercut Head ELC EBL215 #12-14 x 1" #3 100 ELC EBL Dril-Flex Specifications ITEM APPLICATION DRILL MAX. LOAD- CAPACITY BEARING AREA ELC EAF430 Steel & Aluminum.150".500" ELC EAF621 Aluminum ONLY.187".470" ELC EAF641 Steel & Aluminum.187".500" ELC EAF681 Steel & Aluminum.187" 1.00" ELC EAF690 Steel & Aluminum.187" 1.50" ELC EDL215 Steel & Aluminum.187".500" ELC EAF755 Steel & Aluminum.210"-.500".525" ELC EAF816 Steel & Aluminum.210".450" ELC EAF841 Steel & Aluminum.210".950" ELC EAF846 Steel & Aluminum.210" 1.450" ELC EAF865 Steel & Aluminum ".500" ELC EAF876 Steel & Aluminum ".830" ELC EAF888 Steel & Aluminum ".830" ELC EAF886 Steel & Aluminum " 1.33" ELC EAF890 Steel & Aluminum " 1.83" ELC EAF960 Steel & Aluminum Steel.187" Alum..250".850" 4302 Glenwood Rd. Brooklyn, NY Fax: Fax:
5 Self-Drilling Screws THE Hex Washer Head Zinc Plated ITEM SIZE PT BOX SIZE 6N50UHWZ #6 x 1/2 # N75UHWZ #6 x 3/4 # N100UHWZ #6 x 1 # N125UHWZ #6 x 1-1/4 # N150UHWZ #6 x 1-1/2 # N50UHWZ #8 x 1/2 # N75UHWZ #8 x 3/4 # N100UHWZ #8 x 1 # N125UHWZ #8 x 1-1/4 # N150UHWZ #8 x 1-1/2 # N200UHWZ #8 x 2 # N50UHWZ #10 x 1/2 # N62UHWZ #10 x 5/8 # N75UHWZ #10 x 3/4 # N100UHWZ #10 x 1 # N125UHWZ #10 x 1-1/4 # N150UHWZ #10 x 1-1/2 # N200UHWZ #10 x 2 # N250UHWZ #10 x 2-1/2 # N300UHWZ #10 x 3 # N75UHWZ #12 x 3/4 # N100UHWZ #12 x 1 # N125UHWZ #12 x 1-1/4 # N150UHWZ #12 x 1-1/2 # N200UHWZ #12 x 2 # N250UHWZ #12 x 2-1/2 # N300UHW #12 x 3 # N75UHWZ #14 x 3/4 # N100UHWZ #14 x 1 # N125UHWZ #14 x 1-1/4 # N150UHWZ #14 x 1-1/2 # N200UHWZ #14 x 2 # N250UHWZ #14 x 2-1/2 # N300UHWZ #14 x 3 # N350UHWZ #14 x 3-1/2" # N400UHWZ #14 x 4 # N450UHWZ #14 x 4-1/2" # N500UHWZ #14 x 5" # N600UHWZ #14 x 6" #3 100 Bulk carton quantities available on all items. ITEM BUCKET TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB TB Pan Phillips Head Zinc Plated ITEM SIZE PT. BOX SIZE 6N37UPPZ #6 x 3/8 # N50UPPZ #6 x 1/2 # N75UPPZ #6 x 3/4 # N50UPPZ #8 x 1/2 # N62UPPZ #8 x 5/8 # N75UPPZ #8 x 3/4 # N100UPPZ #8 x 1 # N125UPPZ #8 x 1-1/4 # N150UPPZ #8 x 1-1/2 # N200UPPZ #8 x 2 # N50UPPZ #10 x 1/2 # N62UPPZ #10 x 5/8 # N75UPPZ #10 x 3/4 # N100UPPZ #10 x 1 # N125UPPZ #10 x 1-1/4 # N150UPPZ #10 x 1-1/2 # N200UPPZ #10 x 2 # N250UPPZ #10 x 2-1/2 # N300UPPZ #10 x 3 # N75UPPZ #12 x 3/4" # N100UPPZ #12 x 1" # N125UPPZ #12 x 1-1/4" # N150UPPZ #12 x 1-1/2" # N200UPPZ #12 x 2" # N250UPPZ #12 x 2-1/2" # N300UPPZ #12 x 3" # N75UPPZ #14 x 3/4 # N100UPPZ #14 x 1 # N125UPPZ #14 x 1-1/4 # N150UPPZ #14 x 1-1/2 # N200UPPZ #14 x 2 # N250UPPZ #14 x 2-1/2 # N300UPPZ #14 x 3 # N350UPPZ #14 x 3-1/2" # N400UPPZ #14 x 4" # N450UPPZ #14 x 4-1/2" # N500UPPZ #14 x 5" # N600UPPZ #14 x 6" #3 100 ITEM BUCKET TB TB TB TB TB TB TB Bulk carton quantities available on all items. Tanner offers its trademarked Bucket of Bolts! specially developed with the contractor in mind. Our best selling items are packaged in 3-1/2 gallon plastic pails with a sturdy handle and reusable screw type top. The Tanner bucket prevents product loss at the jobsite due to spillage and broken cardboard boxes. Please look for the bucket logo throughout our catalog. 6 To Order Please Call: Fax: Fax: To Order On-Line: To Order By sales@tannerbolt.com
6 Self-Drilling Screws Flat Phillips Head Zinc Plated ITEM SIZE PT. BOX SIZE 6N50UFPZ #6 x 1/2 # N75UFPZ #6 x 3/4 # N100UFPZ #6 x 1 # N50UFPZ #8 x 1/2 # N75UFPZ #8 x 3/4 # N100UFPZ #8 x 1 # N125UFPZ #8 x 1-1/4 # N150UFPZ #8 x 1-1/2 # N200UFPZ #8 x 2 # N300UFPZ #8 x 3 # N75UFPZ #10 x 3/4 # N100UFPZ #10 x 1 # N125UFPZ #10 x 1-1/4 # N150UFPZ #10 x 1-1/2 # N200UFPZ #10 x 2 # N300UFPZ #10 x 3 # N400UFPZ #10 x 4 # N75UFPZ #12 x 3/4 # N100UFPZ #12 x 1 # N125UFPZ #12 x 1-1/4" # N150UFPZ #12 x 1-1/2 # N200UFPZ #12 x 2" # N250UFPZ #12 x 2-1/2 # N300UFPZ #12 x 3 # N400UFPZ #12 x 4 # N75UFPZ #14 x 3/4 # N100UFPZ #14 x 1 # N125UFPZ #14 x 1-1/4" # N150UFPZ #14 x 1-1/2 # N200UFPZ #14 x 2 # N250UFPZ #14 x 2-1/2 # N300UFPZ #14 x 3 # N400UFPZ #14 x 4 # N500UFPZ #14 x 5" #3 100 Flat Phillips Head Undercut Zinc Plated ITEM SIZE PT. B0X SIZE 8N50UFPZ/UC #8 x 1/2 # N75UFPZ/UC #8 x 3/4 # N100UFPZ/UC #8 x 1 # N125UFPZ/UC #8 x 1-1/4 # N50UFPZ/UC #10 x 1/2 # N75UFPZ/UC #10 x 3/4 # N100UFPZ/UC #10 x 1 # N125UFPZ/UC #10 x 1-1/4 # N150UFPZ/UC #10 x 1-1/2 # N200UFPZ/UC #10 x 2 # N75UFPZ/UC #12 x 3/4 # N100UFPZ/UC #12 x 1 # N125UFPZ/UC #12 x 1-1/4 # N75UFPZ/UC #14 x 3/4 # N100UFPZ/UC #14 x 1 # N125UFPZ/UC #14 x 1-1/4 #3 100 Flat Phillips Head Undercut Zinc Plated Continuous Hinge Installation Screw SIZE QTY 12C68UFLZ/USA #12-24 x 11/16" # C68UFLZ/USABULK #12-24 x 11/16" # Tanner Tip Flat undercut heads are supplied to provide larger usable thread. Head height of undercut screws is approximately 2/3 that of standard flat head screws. Drive depths are reduced proportionately. Please turn to Page 63 to see this product with a Torx Tamper-Resistant drive. Oval Phillips Head Zinc Plated Glazing Bead Installation Screw ITEM SIZE PT. CARTON SIZE 6N100UOVZ/BULK #6 x 1 # N125UOVZ/BULK #6 x 1-1/4 # N100UOVZ/BULK #8 x 1 # N125UOVZ/BULK #8 x 1-1/4 # N100UOVZ/BULK #10 x 1 # N125UOVZ/BULK #10 x 1-1/4 # Oval Phillips Head Door Closer Installation Screw 14C75UOVZ #14-24 x 3/4" # C100UOVZ #14-24 x 1" # C250UOVZ #14-24 x 2-1/2" # Tanner is the self-drilling specialist to the door industy! 4302 Glenwood Rd. Brooklyn, NY Fax: Fax:
7 Self-Drilling Screws 410 Stainless Steel- ClimaShield 8 Product Description Tanner stocks a full line of 410 stainless steel self-drilling screws in hex washer, pan and flat phillips head. Available with ClimaShield corrosion protection or a bright hardened finish, 410 stainless steel self-drilling screws should be used when strength and corrosion resistance are factors. Type 410 martensitic stainless steel permits strength properties roughly equivalent to those of medium carbon steel SAE Grade 5 fasteners. These properties are attained as this grade of stainless steel has a carbon content that allows a sharp increase in tensile strength after heat treating and also reduces corrosion resistance. 410 Stainless Steel is magnetic, contains no nickel, loses toughness in very cold temperatures, and may have a tendency to become brittle. Its corrosion resistance is not as good as austenitic ("18-8 "or 300 series) stainless steel and are therefore recommended in mild atmospheres. Type 410 stainless steel should be considered a prime candidate for use in any application where zinc plated case hardened steel fasteners are deficient in providing the needed corrosion protection. They are not recommended for fastening dissimilar metals such as aluminum to steel or stainless steel. Mechanical Properties: Tensile 180,000 psi heat-treated Yield 150,000 psi heat-treated Hardness 40 Rockwell C min. Installation A standard screw gun with a depth sensitive nosepiece should be used to install self-drilling screws. For optimal fastener performance, the screw gun should be a minimum of 4 amps and have an RPM range of Adjust the screw gun nosepiece to properly seat the fastener. New magnetic sockets must be correctly set before use. Remove chip build-up as needed. The fastener is fully seated when the head is flush with the work surface. Overdriving may result in torsional failure of the fastener or strip out of the substrate. The fastener must penetrate beyond the metal structure a minimum of 3 pitches of thread. Tanner Tip Please see Page 117 for recommended screwdrivers. To Order Please Call: Fax: Fax: To Order On-Line: To Order By sales@tannerbolt.com ITW Buildex 410 Stainless Steel TEKS ITW Buildex 410 Stainless Steel TEKS are designed for applications requiring extra corrosion resistance through the added protection of ClimaShield. They are uniquely identified by the Buildex "B4" marking on the head. TEKS self-drilling screws are engineered for fast drilling and smooth tapping without extra effort. Available with bonded neoprene washers for weather-tight sealing applications. Hex Washer Head 8N50UHW4BX #8 x 1/2" # N62UHW4BX #8 x 5/8" # N75UHW4BX #8 x 3/4" # N75UHW4BX #10 x 3/4" # N100UHW4BX #10 x 1" # N150UHW4BX #10 x 1-1/2" # N75UHW4BX #12 x 3/4" # N100UHW4BX #12 x 1" # N150UHW4BX #12 x 1-1/2" # N200UHW4BX #12 x 2" # N75UHW4BX #14 x 3/4" # N100UHW4BX #14 x 1" # N150UHW4BX #14 x 1-1/2" # N200UHW4BX #14 x 2" # To order carton quantity please add /BULK to the item code, e.g. 8N50UHW4BX/BULK. Hex Washer Head with Bonded Sealing Washer 10N75UMB4BX #10 x 3/4" # N150UMB4BX #10 x 1-1/2" # N100UMB4BX #12 x 1" # N125UMB4BX #12 x 1-1/4" # N150UMB4BX #12 x 1-1/2" # N200UMB4BX #12 x 2" # N100UMB4BX #14 x 1" # N125UMB4BX #14 x 1-1/4" # N150UMB4BX #14 x 1-1/2" # N200UMB4BX #14 x 2" # N300UMB4BX #14 x 3" # To order carton quantity please add /BULK to the item code, e.g. 10N62UMB4BX/BULK.
8 Self-Drilling Screws 410 Stainless Steel - Bright Finish Hex Washer Head ITEM SIZE PT. ITEM SIZE PT. SIZE SIZE 6N37UHW4 #6 x 3/8 #2 6N50UHW4 #6 x 1/2 #2 6N62UHW4 #6 x 5/8 #2 6N75UHW4 #6 x 3/4 #2 6N100UHW4 #6 x 1 #2 6N125UHW4 #6 x 1-1/4 #2 6N150UHW4 #6 x 1-1/2" #2 8N37UHW4 #8 x 3/8 #2 8N50UHW4 #8 x 1/2 #2 8N62UHW4 #8 x 5/8 #2 8N75UHW4 #8 x 3/4 #2 8N100UHW4 #8 x 1 #2 8N125UHW4 #8 x 1-1/4 #2 8N150UHW4 #8 x 1-1/2 #2 8N175UHW4 #8 x 1-3/4 #2 8N200UHW4 #8 x 2 #2 10N50UHW4 #10 x 1/2 #2 10N62UHW4 #10 x 5/8 #2 10N75UHW4 #10 x 3/4 #3 10N100UHW4 #10 x 1 #3 10N125UHW4 #10 x 1-1/4 #3 10N150UHW4 #10 x 1-1/2 #3 10N175UHW4 #10 x 1-3/4 #3 10N200UHW4 #10 x 2 #3 10N250UHW4 #10 x 2-1/2 #3 10N300UHW4 #10 x 3" #3 Packaged 100/box Flat Phillips Head Undercut 10N350UHW4 #10 x 3-1/2 #3 10N400UHW4 #10 x 4 #3 12N75UHW4 #12 x 3/4 #3 12N100UHW4 #12 x 1 #3 12N125UHW4 #12 x 1-1/4 #3 12N150UHW4 #12 x 1-1/2 #3 12N175UHW4 #12 x 1-3/4 #3 12N200UHW4 #12 x 2 #3 12N250UHW4 #12 x 2-1/2 #3 12N300UHW4 #12 x 3 #3 12N400UHW4 #12 x 4 #3 12C125UHW4 #12-24 x 1-1/4" #4.5 12C150UHW4 #12-24 x 1-1/2" #5 14N75UHW4 #14 x 3/4 #3 14N100UHW4 #14 x 1 #3 14N125UHW4 #14 x 1-1/4 #3 14N150UHW4 #14 x 1-1/2 #3 14N175UHW4 #14 x 1-3/4 #3 14N200UHW4 #14 x 2 #3 14N250UHW4 #14 x 2-1/2 #3 14N300UHW4 #14 x 3 #3 14N350UHW4 #14 x 3-1/2 #3 14N400UHW4 #14 x 4 #3 14N500UHW4 #14 x 5" #3 14N600UHW4 #14 x 6 #3 ITEM SIZE PT. BOX SIZE 10N75UFP4/UC #10 x 3/4" # C100UFP4/UC #10-24 x 1" #3 100 Drilling Capacity Standard for 410 Stainless Steel Self-Drilling Screws NOMINAL POINT RECOMMENDED RECOMMENDED SIZE OF SCREW STYLE PANEL THICKNESS DRILL SPEED (RPM) #6 No " -.083" 2500 Max. #8 No " -.110" 2500 Max. #8 No " -.142" 2500 Max. #10 No " -.142" 2500 Max. #10 No " -.177" 2500 Max. #12 No " -.209" 1800 Max. #12 No " -.354" 1800 Max. #14 No " -.248" 1800 Max. Pan Phillips Head ITEM SIZE PT. ITEM SIZE PT. SIZE SIZE 6N37UPP4 #6 x 3/8 #2 6N50UPP4 #6 x 1/2 #2 6N62UPP4 #6 x 5/8 #2 6N75UPP4 #6 x 3/4 #2 6N100UPP4 #6 x 1 #2 6N150UPP4 #6 x 1-1/2 #2 8N37UPP4 #8 x 3/8 #2 8N50UPP4 #8 x 1/2 #2 8N75UPP4 #8 x 3/4 #2 8N100UPP4 #8 x 1 #2 8N125UPP4 #8 x 1-1/4 #2 8N150UPP4 #8 x 1-1/2 #2 8N200UPP4 #8 x 2 #2 10N50UPP4 #10 x 1/2 #2 10N62UPP4 #10 x 5/8 #2 10N75UPP4 #10 x 3/4 #3 10N100UPP4 #10 x 1 #3 10N125UPP4 #10 x 1-1/4 #3 10N150UPP4 #10 x 1-1/2 #3 10N200UPP4 #10 x 2 #3 Packaged 100/box Flat Phillips Head ITEM SIZE PT. ITEM SIZE PT. SIZE SIZE 6N50UFP4 #6 x 1/2 #2 6N75UFP4 #6 x 3/4 #2 6N100UFP4 #6 x 1 #2 6N125UFP4 #6 x 1-1/4 #2 6N150UFP4 #6 x 1-1/2 #2 8N50UFP4 #8 x 1/2 #2 8N62UFP4 #8 x 5/8 #2 8N75UFP4 #8 x 3/4 #2 8N100UFP4 #8 x 1 #2 8N125UFP4 #8 x 1-1/4 #2 8N150UFP4 #8 x 1-1/2" #2 8N200UFP4 #8 x 2 #2 10N50UFP4 #10 x 1/2" #2 10N62UFP4 #10 x 5/8 #2 10N75UFP4 #10 x 3/4 #3 10N100UFP4 #10 x 1 #3 10N125UFP4 #10 x 1-1/4 #3 10N150UFP4 #10 x 1-1/2 #3 10N175UFP4 #10 x 1-3/4" #2 10N200UFP4 #10 x 2 #3 10N250UFP4 #10 x 2-1/2 #3 Packaged 100/box 10N250UPP4 #10 x 2-1/2 #3 10N300UPP4 #10 x 3 #3 12N125UPP4 #12 x 1-1/4 #3 12N75UPP4 #12 x 3/4 #3 12N100UPP4 #12 x 1 #3 12N150UPP4 #12 x 1-1/2 #3 12N200UPP4 #12 x 2 #3 12N250UPP4 #12 x 2-1/2 #3 12N300UPP4 #12 x 3 #3 14N75UPP4 #14 x 3/4 #3 14N100UPP4 #14 x 1 #3 14N125UPP4 #14 x 1-1/4 #3 14N150UPP4 #14 x 1-1/2 #3 14N175UPP4 #14 x 1-3/4 #3 14N200UPP4 #14 x 2 #3 14N250UPP4 #14 x 2-1/2 #3 14N300UPP4 #14 x 3 #3 14N350UPP4 #14 x 3-1/2 #3 14N400UPP4 #14 x 4 #3 10N300UFP4 #10 x 3 #3 10N400UFP4 #10 x 4" #3 12N75UFP4 #12 x 3/4 #3 12N100UFP4 #12 x 1 #3 12N125UFP4 #12 x 1-1/4 #3 12N150UFP4 #12 x 1-1/2 #3 12N175UFP4 #12 x 1-3/4" #3 12N200UFP4 #12 x 2" #3 12N250UFP4 #12 x 2-1/2 #3 12N300UFP4 #12 x 3 #3 12N400UFP4 #12 x 4" #3 14N75UFP4 #14 x 3/4 #3 14N100UFP4 #14 x 1 #3 14N125UFP4 #14 x 1-1/4 #3 14N150UFP4 #14 x 1-1/2 #3 14N175UFP4 #14 x 1-3/4 #3 14N200UFP4 #14 x 2 #3 14N250UFP4 #14 x 2-1/2 #3 14N300UFP4 #14 x 3" #3 14N350UFP4 #14 x 3-1/2 #3 14N400UFP4 #14 x 4 # Glenwood Rd. Brooklyn, NY Fax: Fax:
9 Self-Drilling Screws 18.8 Stainless Steel Product Description Elco 18.8 stainless steel self-drilling screws are used for fastening to aluminum when corrosion is a primary concern. Available in hex washer head from #10 to 1/4", these screws are manufactured from 302 stainless steel and are finished in a silver top coat. Not designed to drill steel. Advantages Provides an exceptionally high level of corrosion resistance. Silver top coat finish protects aluminum from galvanic reaction with fastener. Head is marked with a "3" for easy identification. 302 (18.8) Hex Washer Head - Made in USA ITEM SIZE BOX ITEM CTN. ELC EAH430 #10 x1/2" 100 ELC EAH430/BULK 8000 ELC EAH445 #10 x3/4" 100 ELC EAH445/BULK 6000 ELC EAH460 #10 x1" 100 ELC EAH460/BULK 4000 ELC EAH630 #12 x3/4" 100 ELC EAH630/BULK 5000 ELC EAH650 #12 x1" 100 ELC EAH650/BULK 5000 ELC EAH680 #12 x1-1/2" 100 ELC EAH680/BULK 2500 ELC EAH800 #14 x3/4" 100 ELC EAH800/BULK 3500 ELC EAH820 #14 x1" 100 ELC EAH820/BULK 3000 ELC EAH835 #14 x1-1/2" 100 ELC EAH835/BULK 2000 ELC EAH870 1/4-20 x 1" 100 ELC EAH870/BULK 3000 ELC EAH880 1/4-20 x1-1/2" 100 ELC EAH880/BULK 2000 #10 x 1/2" through #14 x 1-1/2" #3 pt., 1/4"-20 x 1" and 1/4"-20 x 1-1/2" #4 pt Stainless Steel Indented Hex Washer ITEM SIZE BOX ITEM CTN. 6N75UHWS #6 x 3/4" 100 6N75UHWS/BULK N50UHWS #8 x 1/2" 100 8N50UHWS/BULK N75UHWS #8 x 3/4" 100 8N75UHWS/BULK N100UHWS #8 x 1" 100 8N100UHWS/BULK N200UHWS #8 x 2" 100 8N200UHWS/BULK N50UHWS #10 x 1/2" N50UHWS/BULK N62UHWS #10 x 5/8" N62UHWS/BULK N75UHWS #10 x 3/4" N75UHWS/BULK N100UHWS #10 x 1" N100UHWS/BULK N125UHWS #10 x 1-1/4" N125UHWS/BULK N150UHWS #10 x 1-1/2" N150UHWS/BULK N200UHWS #10 x 2" N200UHWS/BULK N250UHWS #10 x 2-1/2" N250UHWS/BULK N75UHWS #12 x 3/4" N75UHWS/BULK N100UHWS #12 x 1" N100UHWS/BULK N125UHWS #12 x 1-1/4" N125UHWS/BULK N150UHWS #12 x 1-1/2" N150UHWS/BULK N200UHWS #12 x 2" N200UHWS/BULK N300UHWS #12 x 3" N300UHWS/BULK N400UHWS #12 x 4" N400UHWS/BULK N75UHWS #14 x 3/4" N75UHWS/BULK N100UHWS #14 x 1" N100UHWS/BULK N125UHWS #14 x 1-1/4" N125UHWS/BULK N150UHWS #14 x1-1/2" N150UHWS/BULK N200UHWS #14 x 2" N200UHWS/BULK N250UHWS #14 x 2-1/2" N250UHWS/BULK N300UHWS #14 x 3" N300UHWS/BULK N400UHWS #14 x 4" N400UHWS/BULK N600UHWS #14 x 6" N600UHWS/BULK N75UHWS 5/16 x 3/4" N75UHWS/BULK N100UHWS 5/16 x 1" N100UHWS/BULK N150UHWS 5/16 x 1-1/2" N150UHWS/BULK N100UHWS 3/8 x 1" N100UHWS/BULK 750 To Order Please Call: Fax: Fax: #6 x 3/4" through #10 x 1/2" #2 point, all others #3 point To Order On-Line: To Order By sales@tannerbolt.com 18.8 Stainless Steel Pan Phillips Head ITEM SIZE BOX ITEM CTN. 6N37UPPS #6 x 3/8" 100 6N50UPPS #6 x 1/2" 100 6N75UPPS #6 x 3/4" 100 6N100UPPS #6 x 1" 100 8N37UPPS #8 x 3/8" 100 8N50UPPS #8 x 1/2" 100 8N75UPPS #8 x 3/4" 100 8N100UPPS #8 x 1" 100 8N125UPPS #8 x 1-1/4" 100 8N150UPPS #8 x 1-1/2" 100 8N200UPPS #8 x 2" 100 8N250UPPS #8 x 2-1/2" N50UPPS #10 x 1/2" N62UPPS #10 x 5/8" N75UPPS #10 x 3/4" N100UPPS #10 x 1" N125UPPS #10 x 1-1/4" N150UPPS #10 x 1-1/ N200UPPS #10 x 2" N250UPPS #10 x 2-1/2" N75UPPS #12 x 3/4" N100UPPS #12 x 1" N125UPPS #12 x 1-1/4" N150UPPS #12 x 1-1/2" N200UPPS #12 x 2" N75UPPS #14 x 3/4" N100UPPS #14 x 1" N125UPPS #14 x 1-1/4" N150UPPS #14 x 1-1/2" 100 #6 x 3/8" through #10 x 1/2" #2 point, all others #3 point. Flat Undercut Phillips 10N50UFPS/UC #10 x 1/2" N50UFPS/UC 4000 #2 point 6N37UPPS/BULK N50UPPS/BULK N75UPPS/BULK N100UPPS/BULK N37UPPS/BULK N50UPPS/BULK N75UPPS/BULK N100UPPS/BULK N125UPPS/BULK N150UPPS/BULK N200UPPS/BULK N250UPPS/BULK N50UPPS/BULK N62UPPS/BULK N75UPPS/BULK N100UPPS/BULK N125UPPS/BULK N150UPPS/BULK N200UPPS/BULK N250UPPS/BULK N75UPPS/BULK N100UPPS/BULK N125UPPS/BULK N150UPPS/BULK N200UPPS N75UPPS/BULK N100UPPS/BULK N125UPPS/BULK N150UPPS/BULK 1000
10 Self-Drilling Construction Screws Self-Drilling Screws Tanner offers a quality line of self-drilling fasteners for penetrating drywall, expanded wire to steel, wood to steel or heavy steel framing. Tanner self-drilling screws have flutes that start fast and remove chips quickly. Sharply formed flutes allow immediate drilling action without walking. Penetration starts with a quick curl of material and continues with excellent chip relief for maximum drilling depth. The designed threads also provide low driving torque for operator ease. Advantages Proper angle on point end reduces walking, starts easily. Long flutes for extra thickness or spacing between material layers. Sharp well-formed cutting edges. Bugle Head Self-Drilling Drywall Zinc ITEM SIZE CTN. 6N100UDWZ/BULK #6 x 1" N112UDWZ/BULK #6 x 1-1/8" N125UDWZ/BULK #6 x 1-1/4" N162UDWZ/BULK #6 x 1-5/8" N187UDWZ/BULK #6 x 1-7/8" N237UDWZ/BULK #8 x 2-3/8" N262UDWZ/BULK #8 x 2-5/8" N300UDWZ/BULK #8 x 3" 2500 K-Lath Modified Truss Self-Drilling Zinc Plated ITEM SIZE CTN. 8N50UMLZ/BULK #8 x 1/2" N75UMLZ/BULK #8 x 3/4" N100UMLZ/BULK #8 x N125UMLZ/BULK #8 x 1-1/4" N162UMLZ/BULK #8 x 1-5/ N187UMLZ/BULK #8 x 1-7/8" 3000 Pan Framing Self-Drilling Black Pan Framing Self-Drilling Zinc 7N43UDF/BULK #7 x 7/16" N43UDFZ/BULK #7 x 7/16" Trim Head Square Drive Self-Drilling Zinc ITEM SIZE CTN. 6N162UTQZ/BULK #6 x 1-5/8" N225UTQZ/BULK #6 x 2-1/4" 3000 Outdoor Screws Outdoor Screws Tanner Outdoor Screws are perfect for applications in decking, fencing, docks and siding. Advantages Special "saw" point for easy driving Cutting ribs for better countersinking Phillips drive Bugle Head Phillips #2 Drive ITEM SIZE CTN. 6N100SDM/BULK #6 x 1" N125SDM/BULK #6 x 1-1/4" N162SDM/BULK #6 x 1-5/8" N200SDM/BULK #6 x 2" N250SDM/BULK #8 x 2-1/2" N300SDM/BULK #8 x 3" N350SDM/BULK #10 x 3-1/2" N400SDM/BULK #10 x 4" N450SDM/BULK #10 x 4-1/2" N500SDM/BULK #10 x 5" N600SDM/BULK #10 x 6" Glenwood Rd. Brooklyn, NY Fax: Fax:
4 X 1 3/8 X 3/16 CHANNEL 101.6 x 34.9 x 4.8 CHANNEL
4 X 1 3/8 X 3/16 CHANNEL 101.6 x 34.9 x 4.8 CHANNEL ALLOWABLE UNIFORM LOADS (lbs./ft. / N/m.) Laterally Supported A w = 0.680 in. 2 / 438.7mm 2 Wt. = 0.88 lbs./ft. / 1.31kg/m. I = 2.62 in. 4 / 1090526mm.
More informationSubmittal Sheet. Product: Item# Description Unit Pack
Submittal Sheet Submittal Sheet #03090414-H Hex Head Drivall Screws (246) Product: Item# Description Unit Pack 08050H3 8 x 1/2-in, Hex Head, Drivall, Clear Zinc, Bulk 10,000 12150H3RG 12 x 1-1/2-in, Hex
More informationDELTA PT. Calculable Extra Performance
DELTA PT Calculable Extra Performance DELTA PT The Screw for Thermoplastics Optimal material flow Superior vibration resistance High torsional strength and tensile strength Calculable performance The Fastener
More informationStep by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the A325 structural bolt. Rev.
Structural Bolting ASTM A325 and ASTM A490 are the two U.S. standard structural bolts. When looking at the mechanical requirements of bolts it appears that an ASTM A325 and SAE J429 Grade 5 are identical
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationConnection Solutions
Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction
More informationDistribution Centers. Call Pro-Twist at 866-462-7578 GOASKPT
AnItochu Company Distribution Centers Location Telephone Fax E-mail Addresses ALABAMA - Montgomery (800) 488-2281 (800) 447-8195 Montgomery@primesourcebp.com ARIZONA - Phoenix (800) 755-2291 (623) 245-4144
More informationBest MATERIALS.com WEATHER GARD TM. Discount Warehouse. Product Guide
WEATHER GARD TM Product Guide Best MATERIALS.com Discount Warehouse Table of Contents Section Page Section Page General Information Fastener Design...3-4 Washer and Fastener Head Styles... 5 Structural
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationINSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
More informationOwner's Manual & Assembly Instructions
Owner's Manual & Assembly Instructions PM01 BASE KIT Model No. FDN1014 717090311 CAUTION: SOME PARTS HAVE SHARP EDGES. CARE MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES TO AVOID A MISHAP. FOR SAFETY
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationScrew Thread Design. Rev. 3-4-09
Screw Thread Design Screw Thread Fundamentals A screw thread is defined as a ridge of uniform section in the form of a helix on either the external or internal surface of a cylinder. Internal threads refer
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationCF-Mesa, CF-Light Mesa, CF-Flute, CF-Metl-Plank, CF-Striated, CF-Santa Fe, CF-Architectural Flat, CF...
Building Insulations - Walls and Ceilings (FM Approval Numbers 4411, 4651, 4880, 4881, 4882) Insulating materials may occur in building construction to reduce heat or sound transmission through a wall,
More informationDURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay
DURO DYNE EAST CORP. Bay Shore, NY 11706 DURO DYNE MIDWEST Fairfield, OH 45011 DURO DYNE WEST Santa Fe Springs, CA 90670 DURO DYNE INTERNATIONAL Bay Shore, NY 11706 Super Sabers Self Piercing Screws For
More informationwww.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationWHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationInstalling the Sno-free Standing Seam System for Metal Roofs
Installing the Sno-free Standing Seam System for Metal Roofs SFP SSP CLIP SSP STANDING SEAM SFP EXTRUSION SFP RAMP PANEL Step # 1 Mark the location and Install Extrusion Mark the area on the roof to receive
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationOne Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty
One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable
More informationHow to Build Your Own CornHole Game
How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2
More information61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationHow To Make A Power Drill
Fasteners and Accessories Selection Guide Western States Metal Roo ng s standard selection of fasteners and accessories to complement our metal panel offering: Metal to metal fasteners Metal to wood fasteners
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationPART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
More informationHow to Build a Poker Table
How to Build a Poker Table www.pokertablematerials.com 10-Person Poker Table- 96 x 48 These are step by step instructions for building a poker table. The table will measure 48" x 96" and have a 4" wide
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationTable of Contents. Western States Standing Seam SS675 Panel Installation, Flashings & Shop Drawing Detail Guide. Notes to Designer /Installers..
Western States Standing Seam SS675 Panel Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer /Installers.. 1 Fastener Placement and Selection.2-3
More informationBlack Wolf POCKET BILLIARD TABLE INSTALLATION MANUAL. SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104
Black Wolf TM POCKET BILLIARD TABLE INSTALLATION MANUAL www.brunswickbilliards.com SERVICE DEPARTMENT P.O. BOX 68 BRISTOL, WI 53104 51-905710-000 SEPTEMBER 2010 NOTE: Please use the instructions in this
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More informationSTANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES
ROOFING APPLICATION STANDARD (RAS) No. 117 STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES Scope 1.1.
More informationStanding Seam Roof Systems
Standing Seam Roof Systems REAL PEOPLE. REAL PRODUCTS. REAL SOLUTIONS. www.a-s.com Building Benefits You Can Expect From A&S Materials Standing Seam roof panels weigh a relatively modest 11/2 pounds per
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationSTRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationAssembly Instructions
Assembly Instructions Overhead Storage Rack 4 x 8 3 x 8 2 x 8 4 x 6 3 x 6 2 x 6 4 x 4 Two 4x8 Racks Pictured Eagle Industrial Group, Inc. 25471 Arctic Ocean Drive Lake Forest, CA 92630 877.655.3443 888.313.9228
More informationDIVISION: 07 00 00 THERMAL AND MOISTURE PROTECTION SECTION: 07 41 13 METAL ROOF PANELS REPORT HOLDER: FIRESTONE BUILDING PRODUCTS COMPANY, LLC
0 ICC ES Report ICC ES (800) 423 687 (62) 699 043 www.icc es.org 000 Most Widely Accepted and Trusted ESR 3422 Reissued 09/201 This report is subject to renewal 09/2016. DIVISION: 07 00 00 THERMAL AND
More informationScepter PVC Molded Junction Boxes
Scepter PVC Molded Junction Boxes ELECTRICAL SYSTEMS PVC MOLDED JUNCTION BOXES 4" to 12" We build tough products for tough environments Standing Still is Not an Option. We re proud to introduce the NEW
More informationREDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES Tools Required Tape Measure Hammer Slotted Screw Driver #2 & #3 Philips Screw Driver 3-4 Foot Level 12 Pry Bar Cold Chisel
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More information1.02 SYSTEM DESCRIPTION
1 OF 7 MODULAR MEZZANINES GUIDE SPECIFICATIONS FOR PART 1 - GENERAL 1.01 RELATED WORK A. SECTION 03 30 00: Cast in Place Concrete (and Concrete Finishing) 1. The area where mezzanine is installed shall
More informationAmerican National, Unified Screw Threads
C h a p t e r 9 American National, Unified Screw Threads In this chapter, you will learn the following to World Class standards:! Why Use Fasteners! The Text Designation for the Unified National Thread!
More informationPART E SPECIFICATIONS
PART E SPECIFICATIONS Page 1 of 5 PART E - SPECIFICATIONS GENERAL E1. APPLICABLE SPECIFICATIONS, STANDARD DETAILS AND DRAWINGS E1.1 The City of Winnipeg Works and Operations Division Standard Construction
More informationFastening Solutions for Cold Formed Steel Construction
Fastening Solutions Fastening Solutions for Cold Formed Steel Construction FRAMECAD Rapid construction fasteners engineered for speed, durability and performance. Designed to deliver the most advanced
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationHilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor
Hilti KWIK HUS-EZ I (KH-EZ I) Internally Threaded Carbon Steel Screw Anchor Supplement to Hilti North American Product Technical Guide Volume 2: Anchor Fastening Technical Guide 2011 Edition 3.3. KWIK
More informationEquipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS. 2012-2015 BMW 335i 3.0L
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-754DS 2012-2015 BMW 335i 3.0L 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 21-2057DK AIR FILTER 1 2 9-0442 TUBE;
More informationROOF FLASHING SPRINGLOK FLASHING SYSTEM FEATURES & BENEFITS PRODUCT DESCRIPTION
SPRINGLOK SYSTEM PRODUCT DESCRIPTION FEATURES & BENEFITS Fry Reglet offers five flashing systems, each tailored for a particular type of substrate so you can get exactly what you need. SM Surface mounted
More informationDiameter. Swift Lift Round Recess Plug. Note: The diameter of the narrow recess plug is the same as the diameter of the round recess plug.
P-5 The P-5 is hot forged from carbon steel. The formed head provis spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedd in the concrete. Due to its being a forged part, the
More informationfoot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs.
Skylight Installation Instructions This document provides instruction and guidelines for installation of both curb mount (CM) and self flashing (SF) unit skylights on flat, pitched (> or equal to 3/12
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationARMSTRONG MOLD GRAPHITE DIE CASTING DIVISION
ARMSTRONG MOLD CORPORATION GRAPHITE DIE CASTING DIVISION Getting Started The Evolution of GDC The GDC technology was developed as a hybrid of traditional permanent mold, graphite mold and the die casting
More informationEarthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001
Earthquake Shake Table Original Design by Casey Hagbo Geophysics Major, Class of 2001 Prepared by: Katie Walch, Science Education Specialist Western UP Center for Science, Math, and Environmental Education
More information9300BC SERIES Light Commercial Door Closer
Light Commercial Door Closer general information The 9300BC is a durable, economically priced door closer designed for commercial exterior and interior doors such as storefront and industrial applications.
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationHUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast prestressed hollow core slabs
HUS-A 6 / HUS-H 6 / HUS-I 6 / HUS-P 6 Screw anchor in precast Anchor version HUS-A 6 Screw with hex head HUS-H 6 Screw with hex head HUS-I 6 Screw with hex head Benefits - Quick and easy setting - Low
More informationTable of Contents. Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide
Western States RustWall Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page Section Page Notes to Designer /Installers.. 1 Fastener Placement and Selection.2-3
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationCeiling Mounted Folding Attic Ladders Installation Instructions
Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationMIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
MIAMI-DADE COUNTY PRODUCT CONTROL SECTION DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208 BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474 T (786) 315-2590
More informationRESEARCH REPORT RP04-2 NOVEMBER 2004 REVISION 2006. Committee on Specifications for the Design of Cold-Formed Steel Structural Members
research report Strength of Screw Connections Subject to Shear Force RESEARCH REPORT RP04-2 NOVEMBER 2004 REVISION 2006 Committee on Specifications for the Design of Cold-Formed Steel Structural Members
More informationDECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS. 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty 866.729.2378 WWW.MOISTURESHIELD.
DECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty Welcome To The Even Greater Outdoors. Congratulations on choosing MoistureShield for your
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationAssembly Instructions Model 1544 Heart-Of-The-Kitchen Island
Assembly Instructions Model 1544 Heart-Of-The-Kitchen Island A. These units are Ready-to-Assemble. Catskill uses positive fastening methods such as wood screws and in some places hidden Bastion fasteners.
More informationSpecifications. Preformed Metal Wall and Roof Panels. Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023
Specifications Preformed Metal Wall and Roof Panels Alcoa Cladding Systems Manufacturing Plant 100 Industrial Boulevard Eastman, Georgia 31023 Section 07410 Preformed Metal Wall and Roof Panels Structural
More informationCedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationThe Olympia Difference
The Olympia Difference Valued Customer, Thank you for choosing Olympia Steel Buildings as the solution to your building needs. You can be confident that the Olympia team of professionals will provide you
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationROOFING APPLICATION STANDARD (RAS) No. 150 PRESCRIPTIVE BUR REQUIREMENTS
ROOFING APPLICATION STANDARD (RAS) No. 150 PRESCRIPTIVE BUR REQUIREMENTS 1. 2. 3. 3.0 Scope 1.1 This application standard shall be used where the authority having jurisdiction has adopted its use, and
More informationSECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
More informationHow to secure your property after a disaster
How to secure your property after a disaster The Red Guide to Recovery HOuse secured properly Board-Up of Windows, Doors and Roof Hole. Lot secured with Perimeter Fencing. Fires, floods, tornadoes, hurricanes,
More informationNATIONAL INSTITUTE OF BIOLOGICALS
Short Term Notice Inviting Quotations Quotations No. S.1-36/07/NIB/Engg. (Civil) Invitation to short term quotations for Repairing of damaged gypsum board false ceiling and painting with epoxy paint in
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationStainless Steel Continuous Hinges
Stainless Steel Continuous Hinges Hager heavy duty continuous hinges offer proven reliability that can stand up to the daily rigors of high-traffic, high-impact areas. They re designed and engineered to
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationInstallation Instructions: (Part # SB76880) XRC Armor Front Fender Kit
WARNING: Check with Local and State laws before installing this accessory! NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included: Qty Parts Included:
More information