Stiletto MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG

Transcription

1 Stiletto

2 Stiletto Inspired by the iconic 1959 Barbie doll, Stiletto is light weight, sturdy and highly recyclable. The modularity of Stiletto can be used to suit any size workstation or table. FEATURES Stiletto sets a benchmark in terms of refined, inspiring and elegant design. This unique resolved and original desking system lifts any work environment. It enhances any work environment from the midlevel open office through to the executive office and boardroom. Incredibly versatile this range can be configured into wide range of number variants with a small kit of parts. 150mm of height adjustment with an indicator to depict the set height. Technically advanced manufacturing techniques improve its environmental footprint and add to its versatility. FINISHES Accessories: Dulux standard colours (custom colours upon request) Tops: Laminate, Veneer (specials upon request) Frames: Polished Aluminium or Dulux standard colours (custom colours upon request) S30 / S50 Screen Finish: Echo Panel, Fabric, Forbo Pinboard, Glass, Laminate, Perforated Metal, Plain Metal, Twin Wall Polycarbonate, Veneer, Whiteboard. CERTIFICATIONS DESIGN Zenith Design Studio

3 DESK LAYOUTS Stiletto Workstation 90 degree Stiletto Workstation 180 degree Left hand Left hand Extension Right hand Right hand Extension Standard Pod of 2 Pod of 4 Stiletto Workstation 120 degree Pod of 6 Pod of 10 Standard U shape Pod of 12 Run of 2 Pod of 3 Pod of 3 Hex Post Type 2 Pod of 6 Run of 3 Pod of 6 Hex Post Type 2 Run of 4 Pod of 12 Hex Post Type 2 Stiletto Workstation U shape 2 x 90 degree 2 x 90 degree 4 end

4 LEG STYLES HEIGHT RANGE

5 CARE & MAINTENANCE FABRIC Gently spot clean excess liquid from the fabric surface. Do not saturate or scrub the fabric with water or cleaning liquids. Every fabric composition varies and the individual fabric supplier should be contacted for further fabric care instructions. ECHO PANEL Remove dust and marks with a soft damp cloth and mild solutions of warm water and upholstery shampoo. Blot dry with a solution free soft damp cloth. FORBO PINBOARD Clean with a damp cloth or if necessary, with a brush using a neutral detergent. Rinse with clean water. The pinboard material is resistant to diluted acids, oils and most conventional solvents such as alcohol, white spirit. LAMINATE For general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. For heavier stains use a non-abrasive cleaner. Excessive scrubbing may damage the decorative surface, particularly a gloss finish. METAL For general cleaning use a soft clean cloth and a mild detergent in warm water. Wipe the surface gently to remove dust or marks. Always rinse after cleaning with fresh water to remove any remaining detergent. POWDER COAT Remove loose deposits with a wet sponge (avoid scratching the surface by dry dusting). Use a soft clean cloth and mild detergent in warm water. Wipe the powdercoating to remove dust, salt or other deposits. Always rinse after cleaning with fresh water to remove any remaining detergent. In some cases, strong solvents recommended for thinning various types of paints and also for cleaning up are harmful to the extended life of the powder coated surface. These solvents should not be used for cleaning purposes. VENEER Dust and wipe down the veneer surface regularly with a slightly damp soft cloth. Furniture polish recommended for the appropriate wood finish will remove soil and dust and provide a protective coating to guard against future spills. Polishing more than 3-4 times per year will see a buildup of cloudy film. Water or liquid spills should be wiped up immediately and avoid placing hot items directly on the veneer surface. TWIN WALL POLYCARBONATE Mild soapy water and a soft clean cloth will sufficiently remove stubborn stains or markings. Make sure the detergent contains no abrasives or solvents. Pre wash with warm water and gently rub stains. Rinse with water to remove excess residue. WHITEBOARD Use a whiteboard duster for general erasing. For tough marks (ghosting) use a professional whiteboard cleaner and wipe with soap, water and a clean cloth afterwards. To prevent ghosting, the ink should be completely dry before erasing. Excessive smearing and smudging can occur if wet ink is attempted to be erased.