Catalog, Cross-Reference, Engineering Guide. Pneumatic Controls Manual. Automation and Control Solutions Honeywell International Inc.

Transcription

1 Pneumatic Controls anual Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée Douglas Drive North 35 Dynamic Drive Golden Valley, N Toronto, Ontario 1V 4Z9 Catalog, Cross-Reference, Engineering Guide customer.honeywell.com U.S. Registered Trademark 2007 Honeywell International Inc BLD516 Pneumatics Catalog Cover.1 1 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. 8/17/07 10:24:51 A

2 Honeywell Technical Support: Honeywell Customer Web-site: customer.honeywell.com Technical data can be accessed via: customer.honeywell.com/pneumatics customer.honeywell.com

3 Table of Contents Humidistats and Thermostats HP970 Pneumatic Humidistat... 2 HP972 Pneumatic Humidistat... 3 Humidistat Cover Assemblies... 4 Humidistat Accessories... 4 Replacement Parts... 4 LP907 Airstream Insertion Pneumatic Thermostat... 5 LP916 Pneumatic Thermostat... 6 TP9600 Pneumatic Thermostat... 8 TP970 Pneumatic Thermostat... 9 Controllers RP7517 Electronic-Pneumatic Transducer CP980 Velocitrol Velocity Sensor/Controller CP980C,D,E, and F Cross-Reference Table Pneumatic Velocity Control Accessories and Replacement Parts LP920 Remote Bulb Temperature Controllers RP920 Pneumatic Controller Pneumatic Temperature Controller Accessories Pneumatic Temperature Controller Replacement Parts Sensors HP971 Pneumatic Humidity Sensor LP914 Pneumatic Temperature Sensor LP915 Pneumatic Temperature Sensor Relays RP418, RP818 Electric/Pneumatic Relay RP470 Pneumatic Selector Relay RP471 Snap-Acting Pneumatic Relay RP670 Pneumatic Switching Relay RP913 Pneumatic Load Analyzer RP922 Pneumatic Potentiometer Switches CLEPAS Air Pressure Switch P643 Pneumatic/Electric Switch P658 Pneumatic/Electric Switch SP470 Pneumatic Diverting Switches Actuators Pneumatic Damper Actuator Torque Ratings P516 Pneumatic Unit Ventilator Damper Actuator P909D Pneumatic Damper Actuator P909E,H Pneumatic Damper Actuators P913 Pneumatic Variable Volume Damper Actuator P918A,B Pneumatic Damper Actuators Valves VP512 Unit Vent Pneumatic Control Valve VP513 Pneumatic Water Valve VP519 Two-Position Three-Way Air Valve VP522 Pneumatic Sequencing Water Valve VP525C Pneumatic Radiator Valve TP971 Pneumatic Day/Night Thermostat TP972 Pneumatic Heating/Cooling Thermostat TP973 Pneumatic Thermostat TP975 Pneumatic Diffuser Thermostat Pneumatic Thermostat Accessories Pneumatic Thermostat Replacement Parts TP9600 Series Standard Covers TP970 Series Standard Covers PP901; PP902 Pressure Reducing Valves PP903 Pneumatic Differential Pressuretrol PP904 Static Pressure Regulators PP905 Static Pressure Sensor PP97 Pneumatic Pressure Control UEC24014 Differential Pressure Switch Pneumatic Pressure Controller Accessories and Replacement Parts TP974 Pneumatic Temperature Sensor Pneumatic Sensor Accessories Pneumatic Sensor Replacement Parts RP970 Pneumatic Capacity Relay RP971 Pneumatic Ratio Relay RP972 Pneumatic Reversing Relay RP973 Pneumatic Averaging Relay RP975 Pneumatic Hesitation Relay Pneumatic Relay Accessories and Replacement Parts SP970 Pneumatic anual or inimum Position Switches Pneumatic Switch Replacement Parts SP970 Operation P920 Pneumatic Damper Actuator Pneumatic Damper Actuator Parts and Accessories P953C,D Pneumatic Coil Valve Actuators P953E, F Pneumatic Coil Valve Actuators P958 Pneumatic Valve Actuators Pneumatic Valve Actuator Parts and Accessories VP526 Three-Way High Pressure Water Valve VP527 Pneumatic Water Valve VP531C Pneumatic Terminal Unit Valve Pneumatic Valve Accessories Pneumatic Valve Replacement Parts i

4 Table of Contents Gauges for Pneumatics Pneumatic Accessories Pneumatic Controls Engineering Guide Introduction Snap Acting Relay Definitions Lockout Relay Abbreviations High-Pressure Selector Relay Symbols Low-Pressure Selector Relay Basic Pneumatic Control System Load Analyzer Relay General Capacity Relay Air Supply and Operation Reversing Relay Restrictor Positive-Positioning Relay Nozzle-Flapper Assembly Averaging Relay Pilot Bleed System Ratio Relay Signal Amplifier Pneumatic Potentiometer Feed and Bleed System Hesitation Relay Sensing Elements Electrical Interlocking Relays Throttling Range Adjustment Electronic-Pneumatic Transducer Relays and Switches Pneumatic Switch Air Supply Equipment anual Positioning Switch General Pneumatic Control Combinations Air Compressor General Air Drying Techniques Sequence Control Pressure Reducing Valve Station Limit Control Thermostats anual Switch Control Controllers General Changeover Control For Two-Pressure Supply System Temperature Controllers Compensated Control System Humidity Controllers Electric-Pneumatic Relay Control Pressure Controllers Pneumatic-Electric Relay Control Sensor-Controller Systems Pneumatic Recycling Control Pneumatic Controllers Pneumatic Centralization Pneumatic Sensors Pneumatic Control System Example Velocity Sensor-Controller Start-Stop Control Sequence Actuators and Final Control Elements Supply Fan Control Sequence Actuators Return Fan Control Sequence Control Valves Warm-Up/Heating Coil Control Sequence Dampers ixing Damper Control Sequence Relays and Switches Discharge Air Temperature Control Sequence Switching Relay Off/Failure ode Control Sequence Pneumatic Product Cross Reference Warranty ii customer.honeywell.com

5 odel Number Index C CLEPAS CP H HP HP HP L LP LP LP LP LP P P909D P909E P909H P P918A P918B P P953C P953D P953E P953F P P P P PP PP PP PP PP PP R RP RP RP RP RP RP RP RP RP RP RP RP RP RP S SP EF SP , 70 T TP TP TP TP TP TP TP U UEC V VP VP VP VP VP525C EF VP VP VP531C EF For more information on any of the products listed in this catalog, you can also use our web site at customer.honeywell.com. The technical literature that is listed above with each model number is also available on that site iii

6 Subject Index A Abbreviations 126 Accessories Damper Actuator Humidistat 4 Pressure Controller 44 Relay 62 Sensor 49 Temperature Controller 37 Thermostat 18 Valve 109 Valve Actuator 92 Velocity Control 33 Actuator 72 92, 137 Damper Proportional control 80 Unit Vent 73 Variable Volume 79 Variable Volume Terminal Unit 74, 76 Large sized Dampers 82 edium-large sized Dampers 80 Pneumatic 138 Small -edium sized Dampers 76 Valve Direct-acting 90 Air Compressor 130 Air Pressure Switch 64 Air Supply and Operation 127 Air Supply Equipment 130 Air velocity sensor 31 Averaging Relay 61, 143 C Calibration Kit 122 Calibration Training Kit 121 Capacity Relay 58, 143 Coil Valve Actuator 86, 88 Controller 134 Humidity 2, 3 PI 35, 136 Pressure Accessories 44 Replacement Parts 44 Pressure Reducing Valve 38 Proportional-Integral 136 Temperature Velocitrol 31 Cover Assemblies Humidistat 4 Thermostat 23, 24 CP980 Cross Reference 32 Cross Reference CP Pneumatic Products D Damper Actuator 72 85, 137 Accessories Proportional control 80 Replacement Parts Unit Vent 73 Variable Volume 79 Variable Volume Terminal Units 74, 76 Dampers 140, 148 Day/Night Thermostat 11 Definitions 125 Differential Pressure Switch 44 Direct acting 125 Diverting Switch 68 E Electrical Interlocking Relays 145 Electric-Pneumatic Relay 52, 145 Control 150 Electronic-Pneumatic Transducer 30, 146 Application 146 F Feed and Bleed System 128 Fittings 116, 117, 118, 119 Fittings Kit 122 G Gauges Pressure Indicating Receiver H Hesitation Relay 62, 145 High Capacity Temperature Controller 35 High Pressure Water Valve 103 High-Pressure Selector Relay 142 Humidistat 2 4 Accessories 4 Cover Assemblies 4 One-pipe 3 Replacement Parts 4 Two-pipe 2, 3 Humidity Controller 134 K Kits Calibration 122 Calibration Training 121 aintenance 121 Pneumatic Fittings 122 L Limit Control 148 Load Analyzer Relay 56, 142 Lockout Relay 141 Low-Pressure Selector Relay 142 aintenance Kit 121 anual Positioning Switch 146 iv customer.honeywell.com

7 Subject Index anual Switch 69, 149 Control 149 iniature Pressure Regulator 116 inimum Position Switch 69 N Nozzle-Flapper Assembly 127 O Offset 125 P Pilot Bleed System 127 Pneumatic Accessories Pneumatic Actuator 72 92, 137, 138 Pneumatic Centralization 152 Pneumatic Control Combinations 147 Pneumatic Control System 153 Pneumatic Controller 134, 135 Pneumatic Damper Actuator Accessories Replacement Parts Torque Rating 72 Pneumatic Differential Pressuretrol 40 Pneumatic Diffuser Thermostat 17 Pneumatic Fittings 116, 117, 118, 119 Pneumatic Humidistat 2 4 Pneumatic Load Analyzer 56 Pneumatic Potentiometer 57, 144 Pneumatic Pressure Control 43 Pneumatic Product Cross Reference Pneumatic Sensor 46 49, 136 Pneumatic Switch 64 69, 146 Pneumatic Thermostat 5 28 Pneumatic Valve Actuator Pneumatic Valves Pneumatic-Electric Relay 145, 150 Pneumatic-Electric Switch 65, 66 Positive Positioning Relay 143 Potentiometer 57, 144 Pressure Controller 38 44, 135 Accessories 44 Differential 40, 44 One-pipe 43 Pressure Regulator 41 Pressure Sensor 42 Replacement Parts 44 Pressure Indicating Gauges Pressure Reducing Valve 38 Pressure Reducing Valves 133 Pressure Regulator 41 Proportional-Integral (PI) Controllers 136 R Radiator Valve 101 Ratio Relay 59, 144 Receiver Gauges Regulator iniature Pressure 116 Static Pressure 122 Relay 140 Accessories 62 Averaging 61, 143 Capacity 58, 143 Electric-Pneumatic 52 Hesitation 62, 145 High-Pressure Selector Relay 142 Load Analyzer 142 Lockout 141 Low-Pressure Selector 142 Positive Positioning 143 Ratio 59 Replacement Parts 62 Reversing 60, 143 Selector 53 Snap-acting 54, 141 Switching 55, 141 Replacement Parts Damper Actuator Humidistat 4 Pressure Controller 44 Relays 62 Sensor 49 Switches 69 Temperature Controller 37 Thermostat 22 Valve 110 Valve Actuator 92 Velocity Control 33 Resistor Assembly 115 Restriction Assembly External 114 Internal 114 Restrictor 126, 127 Reverse acting 126 Reversing Relay 60, 143 S Selector Relay 53 Sensing Elements Averaging Element 129 Bimetal 128 Remote Bulb 129 Rod and Tube 129 Sensor 46 49, 136 Humidity 46 Pressure Sensor 42 Temperature 47, 48, 49 Sensor Accessories 49 Sensor Replacement Parts 49 Sensor-controller Systems 135 Sequence Control 148 Sequencing Water Valve 99 Signal Amplifier 128 Snap-acting Relay 54, 141 Spring ranges 138 Static Pressure Regulator 41, 122 Static Pressure Sensor v

8 Subject Index Switches 140 Air Pressure 64 Diverting 68 Four Port Switch Operation 70 anual 69, 146 Control 149 inimum Position 69 Pneumatic-Electric 65, 66 Replacement Parts 69 Three Port Switch Operation 70 Switching Relay 55, 141 T Temperature Controller 34 37, 134 Accessories 37 High Capacity 35 Remote Bulb 34 Replacement Parts 37 Two-pipe 34 Temperature Sensor 47, 48, 49 Direct acting 47, 48, 49 Terminal Unit Valve 107 Thermometer Calibration Tool 121 Thermostat 5 28, 133 Accessories 18 Airstream Insertion 5 Cover TP TP Day/Night 11 One or Two Temperature 13 One-pipe 5, 8, 15, 134 Pneumatic Diffuser 17 Remote Bulb 5, 6 Replacement Parts 22 Three-pipe 11 Two-pipe 6, 8, 9, 11, 13, 15, 134 Three-Way ixing Valve Piping 147 Three-way Valve 98, 103, 139 Throttling Range Adjustment 129 Torque Rating Pneumatic Damper Actuator 72 Transducer 146 Electronic-Pneumatic 30 Two-position Air Valve 98 U Unit Vent Control Valve 94 Unit Vent Damper Actuator 73 V Valve , 138 Pressure Reducing 133 Radiator 101 Terminal Unit 107 Three-way 98, 103, 139 Two-position Air 98 Unit Vent Control 94 Water 96, 105 High Pressure 103 Sequencing 99 Valve Accessories 109 Valve Actuator 86 92, 137 Accessories 92 Coil 86, 88 Cold Water 86, 88 Direct-acting 90 Hot Water 86, 88 Proportional control 86, 88 Replacement Parts 92 Steam 86, 88 Valve Replacement Parts 110 Valves 148 Variable Volume Damper Actuator 79 Variable Volume Terminal Unit Damper Actuator 74, 76 Velocitrol Velocity Sensor/Controller 31 Velocity Control Accessories 33 Velocity Control Replacement Parts 33 Velocity Sensor 136 W Water Valve 96, 105 Sequencing 99 vi customer.honeywell.com

9 Humidistats and Thermostats HP970 Pneumatic Humidistat... 2 HP972 Pneumatic Humidistat... 3 Humidistat Cover Assemblies... 4 Humidistat Accessories... 4 Replacement Parts... 4 LP907 Airstream Insertion Pneumatic Thermostat... 5 LP916 Pneumatic Thermostat... 6 TP9600 Pneumatic Thermostat... 8 TP970 Pneumatic Thermostat... 9 TP971 Pneumatic Day/Night Thermostat TP972 Pneumatic Heating/Cooling Thermostat TP973 Pneumatic Thermostat TP975 Pneumatic Diffuser Thermostat Pneumatic Thermostat Accessories Pneumatic Thermostat Replacement Parts TP9600 Series Standard Covers TP970 Series Standard Covers Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide 1 Cross Reference

10 Humidistats HP970 Pneumatic Humidistat Two-pipe, single setpoint, pneumatic humidistat used to provide proportional control of pneumatic valves on humidification or dehumidification systems. Durable HP970 series humidistat. Pilot operated for high capacity. Direct Acting (DA) and Reverse Acting (RA) models are available. Vertical or horizontal mounting. Backplate has molded air connections; no separate fittings needed. Variety of cover finishes and display styles available. HP970 Typical Piping C3225 B HP972B HUIDIFIER VALVE SUPPLY N.C. Application: Humidity Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Airflow Usage: scfm (5.2 ml/s) aximum Operating Temperature: 45 F to 125 F (7 C to 52 C) aximum Storage Temperature: -30 to +150 F (-34 to +66 C) aximum Operating Pressure: 25 psi (170 kpa) Accessories: Duct Sampling Chamber Restrictor Block Assembly,.005 in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B Thermostat Guard Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations Humidistat Cover assembly Satin Chrome with setpoint display and Honeywell logo for vertical mounting, scale range 15 to 75% RH /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. For additional covers, see Humidistat Cover Assemblies Replacement Parts: Filter Cartridge Assembly Back Plate Assembly Restrictor Block Assembly, in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP972 Product Number Action Number of Pipes Scale Range (% RH) Throttling Range (% RH) Setpoint Comments HP970A1009 Direct Acting 2 15 to 75% RH 3 to 15% RH Single Order Cover Separately HP970B1007 Reverse Acting 2 15 to 75% RH 3 to 15% RH Single Order Cover Separately HP970B1015 Reverse Acting 2 65 to 95% RH 3 to 15% RH Single Order Cover Separately 2 customer.honeywell.com

11 HP972 Pneumatic Humidistat Typical Two-Pipe HP972B Hook-up C3225 B Application: Humidity Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Airflow Usage: scfm (5.2 ml/s) aximum Operating Temperature: 45 F to 125 F (7 C to 52 C) aximum Storage Temperature: -30 to +150 F (-34 to +66 C) aximum Operating Pressure: 25 psi (170 kpa) Accessories: Thermostat Guard Duct Sampling Chamber Humidistat Cover assembly Satin Chrome with setpoint display and Honeywell logo for vertical mounting, scale range 15 to 75% RH Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy Product Number HP972B HUIDIFIER VALVE SUPPLY Action N.C. Humidistats A proportioning pneumatic humidistat used on one- or two-pipe installations for controlling actuators on valves and dampers in air conditioning systems for humidification or dehumidification control. Durable HP970 series humidistat. Snap-on mounting to backplate. Vertical or horizontal mounting. Backplate has molded air connections; no separate fittings needed. Variety of cover finishes and display styles available. Wide throttling range. Typical One-pipe HP972B Hook-up.005 RESTRICTION (BLUE) B HUIDIFIER VALVE SUPPLY HP972B N.C. C3226 AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. For additional covers, see Humidistat Cover Assemblies Replacement Parts: Filter Cartridge Assembly Nylon element assembly, with Spring odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP Restrictor Block Assembly,.005 in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B Back Plate Assembly Number of Pipes Scale Range (% RH) Throttling Range (% RH) Setpoint Comments HP972B1005 Reverse Acting 1 or 2 15 to 75% RH 7 to 35% RH Single Order Cover Separately Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

12 Humidistats Humidistat Cover Assemblies Product Number Scale Range (% RH) Description Used With to 75% RH Humidistat Cover assembly Satin Chrome with setpoint display and Honeywell logo for vertical mounting, scale range 15 to 75% RH to 75% RH Humidistat Cover assembly Satin Chrome with setpoint display and Honeywell logo for horizontal mounting. Scale Range 15 to 75% RH Humidistat Cover assembly Satin Chrome with no setpoint display and Honeywell logo for vertical mounting Humidistat Cover assembly Satin Chrome with no setpoint display and Honeywell logo for horizontal mounting Humidistat Cover assembly Satin Chrome with no setpoint display and no logo for vertical or horizontal mounting to 75% RH Humidistat Cover assembly Beige with setpoint display and Honeywell logo for vertical mounting. Scale Range 15 to 75% RH HP970; HP972 HP970; HP972 HP970; HP972 HP970; HP972 HP970; HP972 HP970; HP972 Humidistat Accessories Product Number Description Used With CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. HP970, HP972 CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. HP970, HP972 Replacement Parts Product Number Description Used With Nylon element assembly, with Spring HP970A; HP970B Nylon element assembly, with Spring HP970B1005; HP972B to 75% RH Scaleplate assembly mounted on guard plate HP970A; HP970B; HP972B 4 customer.honeywell.com

13 Thermostats LP907 Airstream Insertion Pneumatic Thermostat One-pipe, single setpoint, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Commonly used as discharge controllers for unit ventilators. Rod and tube insertion sensing element. Wide throttling range. Gage tee and tank valve facilitate checking line pressures. Typical Heating/Cooling Application. TP972 WINTER 18 psi (1.24 BAR) SUER 13 psi (.90 BAR) 5448B R.A. O.A. Product Number B P516A Action P516A RP670 H L Number of Pipes LP907A D.A. FACE AND BY-PASS RP418 E-P RELAY WIRE IN PARALLEL WITH FAN OTOR FAN Setpoint Setpoint Temperature Range (F) Typical Duct ounted Application. VP514 LP907A Application Type: Low Limit controller Dimensions, Approximate: 5 7/16 in. high x 1 1/16 in. wide x 2 1/4 in. deep (138 mm high x 27 mm wide x 57 mm deep) Airflow Usage: scfm (5.2 ml/s) Air Connections: Barb fittings 1/4 in. (6 mm) poly tubing ounting: Insertion with locknut on boss of insertion shank Operating Temperature: 40 F to 140 F (4 C to 60 C) Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: Yes Sensor Element: Invar rod and seamless brass tube, 18 3/4 in. (476 mm) long and 11/32 in. (9 mm) diameter aximum Operating Pressure: 25 psi (170 kpa) Accessories: in. Red In-line Filtered Restriction Assembly; Inlet: 1/4 in., Outlets: 1/4 in. and 1/4 in.; Order in Quantities of External Restriction Assembly in. Restriction, Red, Inlet 1/4 in; Outlet 1/4 in. and 5/32 in. CCT2085 Pneumatic Fitting - Gauge Adapter fits any standard 1/8 in. NPT gauge, Capacity Throttling Range Includes IN. RESTRICTION (NOT FURNISHED) LP907A1002 Direct Acting 1 Single 40 F to 140 F Low 10 F to 70 F Fittings for mounting on sheet metal duct. Order restrictor separately. LP907A1044 Direct Acting 1 Single 40 F to 140 F Low 5 F to 35 F Fittings for mounting on sheet metal duct. Order restrictor separately. (F) 5450 Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

14 Thermostats LP916 Pneumatic Thermostat Two-pipe, single temperature, unit mounted, remote bulb pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Liquid filled remote bulb. Direct Acting (DA), Reverse Acting (RA) and Heating/Cooling (DA/ RA) models are available. Typical LP916A ixed Air Application Typical LP916C Fan Coil Application, Cooling Only DISCHARGE AIR DAPER OPERATOR RA LP916C B N.O. DISCHARGE COIL OA N.C. N.O. CHILLED WATER SUPPLY BULB 5449 DA LP916A Typical LP916B Fan Coil Application, Heating/Cooling with Seasonal Changeover B DISCHARGE AIR FILTER FAN SU/WIN LP916B B RETURN AIR 5415 Typical LP916A Duct ounted Heating Application COIL N.O. CW IN SUER N.O. BULB HW IN WINTER FAN B LP916A DA FILTER RETURN AIR AIR SUPPLY DISCHARGE customer.honeywell.com

15 Application Type: Unit Ventilator Dimensions, Approximate: 4 3/4 in. high x 3 3/4 in. wide x 3 in. deep (121 mm high x 95 mm wide x 76 mm deep) Airflow Usage: scfm (10.4 ml/s) with in. restriction Air Connections: Barb fittings 1/4 in. (6 mm) ounting: In compartment of a unit ventilator Operating Temperature: 135 F maximum (57 C maximum) Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: Yes Sensor Element: Bulb 1/2 x 5 7/8 in., capillary 36 in. (914 mm) long Setpoint: Single Number of Pipes: 2 Product Number Action Sensor Element LP916A1019 LP916A1134 LP916A1175 LP916B1017 LP916B1058 LP916B1074 LP916B1082 LP916B1090 LP916C1023 Direct Acting Direct Acting Direct Acting Direct Acting Heating, Reverse Acting Cooling Direct Acting Heating, Reverse Acting Cooling Direct Acting Heating, Reverse Acting Cooling Direct Acting Heating, Reverse Acting Cooling Direct Acting Heating, Reverse Acting Cooling Reverse Acting Bulb 1/2 x 5 7/8 in., capillary 36 in. (914 mm) long Bulb 3/8 x 7 in., capillary 36 in. (914 mm) long Bulb 3/8 x 7 in., capillary 36 in. (914 mm) long Bulb 1/2 x 5 7/8 in., capillary 36 in. (914 mm) long Bulb 1/2 x 5 7/8 in., capillary 36 in. (914 mm) long Bulb 3/8 x 7 in., capillary 36 in. (914 mm) long Bulb 3/8 x 7 in., capillary 36 in. (914 mm) long Bulb 3/8 x 9 in., capillary 36 in. (914 mm) long Bulb 3/8 x 9 in., capillary 36 in. (914 mm) long Setpoint Temperature Range Changeover Thermostats aximum Operating Pressure: 25 psi (170 kpa) Accessories: A Capillary Holder Assembly for duct insertion, 8 3/8 in. long Gasket for Connector Assembly Connector Assembly, with integral in. restriction and filters for post 1984 units Replacement Parts: Repair kit containing in. restrictor plate, filters, and gaskets for pre-1984 units Throttling Range (F) (C) (psi) (kpa) (F) (C) 65 F to 85 F 65 F to 85 F 40 F to 80 F 65 F to 85 F 65 F to 85 F 65 F to 85 F 65 F to 85 F 65 F to 85 F 60 F to 80 F 19 C to 30 C 19 C to 30 C Includes 3.5 F 2 C Integral ounting Bracket and A Bag Assembly (mounting hardware). Order bulb hangers ( ) separately. 3.5 F 2 C Integral ounting Bracket, (2) Bulb Hangers and A Bag Assembly (mounting hardware). 7 F Integral ounting Bracket, (2) Bulb Hangers and A Bag Assembly (mounting hardware). 19 C to 30 C 19 C to 30 C 19 C to 30 C 19 C to 30 C 19 C to 30 C Heat 18 psi, Cool 13 psi Heat 18 psi, Cool 9 psi Heat 18 psi, Cool 13 psi Heat 18 psi, Cool 13 psi Heat 18 psi, Cool 13 psi Heat 124 kpa, Cool 90 kpa Heat 124 kpa, Cool 62 kpa Heat 124 kpa, Cool 90 kpa Heat 124 kpa, Cool 90 kpa Heat 124 kpa, Cool 90 kpa 3.5 F 2 C Integral ounting Bracket and A Bag Assembly (mounting hardware). Order bulb hangers ( ) separately. 3.5 F 2 C Integral ounting Bracket and A Bag Assembly (mounting hardware). Order bulb hangers ( ) separately. 3.5 F 2 C Order ounting Bracket, Knob, Bulb Hangers, and Scale Plate separately. 3.5 F 2 C Integral ounting Bracket, (2) Bulb Hangers and A Bag Assembly (mounting hardware). 3.5 F 2 C Integral ounting Bracket, (2) Bulb Hangers and A Bag Assembly (mounting hardware). 3.5 F Integral ounting Bracket, (2) Bulb Hangers and A Bag Assembly (mounting hardware). Comments New installation model Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

16 Thermostats TP9600 Pneumatic Thermostat Application Type: Wall Thermostat Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Airflow Usage: scfm (5.2 ml/s) Air Connections: Barb fittings 5/32 in. (4 mm) ounting: Vertical Wall ounting Operating Temperature: 50 F to 100 F (10 C to 38 C) Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: No Sensor Element: Bimetal aximum Operating Pressure: 25 psi (170 kpa) Accessories: in. Blue Filter Restriction Assembly; Inlet: 1/4 in., Outlets: 1/4 in. and 5/32 in.; Order in Quantities of Duct Sampling Chamber in. Blue In-line Filtered Restriction Assembly; Inlet: 1/4 in., Outlets: 5/32 in. and 5/32 in Thermostat Guard Setpoint Extension Taupe Converastat wall plate with 2 screws Pneumatic thermostat for proportional control of pneumatic valves and actuators with one- or two-pipe systems. Available with two cover options, the TP9600 is not only affordable and easy to install, but it controls temperature with the reliability that only Honeywell can provide. TP9600 delivers the Honeywell TP970s unparalleled sensing and control. Redesigned models fit your high-volume pneumatic applications. Backplate mounts quickly. Thermostat snaps onto backplate. Cover is mounted and locked into place with concealed setscrews. Attractive Euro-contoured design comes with choice of two cover options. Neutral taupe color blends with today s commercial interiors. Adapter kits are available to retrofit most pneumatic jobs. Branchline capacity Low for TP9630 and TP9633 Branchline capacity High for TP9600, TP9610, TP9603, TP Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. Replacement Parts: Filter Cartridge Assembly Back Plate Assembly odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP Restrictor Block Assembly, in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B Product Number Action Number of Pipes Setpoint Setpoint Temperature Range Changeover (F) (psi) (kpa) (F) Throttling Range Includes TP9600A1007 Direct Acting 2 Single 60 F to 90 F 2 F to 10 F Cover, Setpoint, and Thermometer are Visible TP9600B1006 Reverse Acting 2 Single 60 F to 90 F 2 F to 10 F Cover, Setpoint, and Thermometer are Visible TP9603A1001 Direct Acting 2 Single 60 F to 90 F 2 F to 10 F Blank Cover, Setpoint, and Thermometer are Not Visible TP9610A1006 Direct Acting 2 Day/Night Day: 60 F to 90 F, Night: 50 F to 75 F TP9620A1005 Direct Acting Heating, Reverse Acting Cooling Day 13 psi, Night 18 psi 2 Single 60 F to 90 F Heat 18 psi, Cool 13 psi Day 90 kpa, Night 124 kpa Heat 124 kpa, Cool 90 kpa 2 F to 10 F Cover, Setpoint, and Thermometer are Visible 2 F to 10 F Cover, Setpoint, and Thermometer are Visible TP9630A1004 Direct Acting 1 or 2 Single 60 F to 90 F 2 F to 10 F Cover, Setpoint, and Thermometer are Visible TP9630B1003 Reverse Acting 1 or 2 Single 60 F to 90 F 2 F to 10 F Cover, Setpoint, and Thermometer are Visible 8 customer.honeywell.com

17 TP970 Pneumatic Thermostat Typical Standard Throttling Range Piping SUPPLY B N.O. TP970A,B OR TP9600A,B Application Type: Heating Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Airflow Usage: scfm (5.2 ml/s) ounting: Wall Operating Temperature: 100 F maximum Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: No Sensor Element: Bimetal Setpoint: Single Number of Pipes: 2 aximum Operating Pressure: 25 psi (170 kpa) Accessories: Setpoint Extension Thermostat Guard Duct Sampling Chamber Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations Setpoint Cam Assembly for TP970A1004, A1012, A1020, A1038, A1046, A1053, A1095, A2004, A2012, A2020, A2038, A2053, A2095; TP970C; TP972A1143, A2143; TP973A1001, A1019, A Setpoint Cam Assembly for TP970B1002, B1010, B1028, B1036, B2002, B2010, B2028, B2036; TP970D; Thermostats Two-pipe, single setpoint, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell two-pipe pneumatic thermostats. Honeywell's best pneumatic thermostat-tp970 series. Shock-resistant, suspension-mounted thermostats provide dependable performance and responsiveness year in and year out. Pilot operated for high capacity. Direct Acting (DA) and Reverse Acting (RA) models are available. Wide throttling range models for Zero Energy Band (ZEB) operation are available. Adapter plate in Convertastat and odernization kits covers existing thermostat wallmark. Backplate has molded air connections-no separate fittings needed. Universal locking cover with satin chrome finish and horizontal, vertical, or blank window options. Typical Wide Throttling Range Application. Typical Wide Throttling Range Piping HEATING VALVE 2 TO 5 PSI (14 TO 34 kpa) SPRING C VALVE OPEN VALVE CLOSED N.O. B TP970C DIRECT ACTING 4 DEGREES F (2.2 DEGREES C) ZERO ENERGY BAND 66F 68F 70F 72F 74F 76F 78F 20C 22C 24C THEROSTAT SETTING TR=10 DEGREES F (5.6 DEGREES C) COOLING VALVE 9 TO 13 PSI (62 TO 90 kpa) SPRING TP972A1002, A1010, A1028, A1044, A2002, A2010, A2028, A2044; TP973B1009, B1017, B1025, B Setpoint Cam Assembly for TP970B1044; TP972A1051, A /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. Replacement Parts: Filter Cartridge Assembly Back Plate Assembly Restrictor Block Assembly,.005 in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP Repair kit consisting of a thermometer assembly, a thermometer post and a 60 to 90F Aluminum Scaleplate Nozzle, Throttling Plate and Bimetal Assembly, DA, Left side N.C. C3538 Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

18 Thermostats Product Number Action TP970A2004 Direct Acting 60 F to 90 F TP970A2012 Direct Acting 40 F to 70 F Setpoint Temperature Range TP970A2020 Direct Acting 15 C to 30 C TP970A2038 Direct Acting 60 F to 90 F TP970A2053 Direct Acting 60 F to 90 F TP970A2145 Direct Acting 60 F to 90 F TP970A2234 Direct Acting 15 C to 30 C TP970A2242 Direct Acting 60 F to 90 F TP970A2259 Direct Acting 60 F to 90 F TP970A2283 Direct Acting 60 F to 90 F TP970B2002 Reverse Acting 60 F to 90 F TP970B2010 Reverse Acting 15 C to 30 C TP970B2077 Reverse Acting 60 F to 90 F TP970B2150 Reverse Acting 15 C to 30 C TP970B2166 Reverse Acting 60 F to 90 F TP970B2182 Reverse Acting 60 F to 90 F TP970B2216 Reverse Acting 60 F to 90 F TP970C2000 Direct Acting 60 F to 90 F Throttling Range (F) (C) (F) (C) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 1 C to 5 C (factory set 2 C) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 1 C to 5 C (factory set 2 C) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 1 C to 5 C (factory set 2 C) 2 F to 10 F (factory set 4 F) 1 C to 5 C (factory set 2 C) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) 2 F to 10 F (factory set 4 F) Includes Order Cover Separately Order Cover Separately Order Cover Separately Thermostat, large wall plate and satin chrome cover. Thermostat, large wall plate and satin chrome cover. Thermostat, small wall plate and satin chrome cover. Thermostat, small wall plate and satin chrome cover. Thermostat, small wall plate and beige cover. Thermostat and satin chrome cover. Comments** odernization kit used to convert older Honeywell Thermostats. odernization kit used to convert older Honeywell Thermostats and competitive thermostats. Convertastat Kit Convertastat Kit Convertastat Kit Tradeline Kit Thermostat and beige cover. Tradeline Kit Order Cover Separately Order Cover Separately Thermostat, small wall plate and satin chrome cover. Thermostat, small wall plate and satin chrome cover. Thermostat, small wall plate and beige cover. Thermostat and satin chrome cover. Convertastat Kit Convertastat Kit Convertastat Kit Tradeline Kit Thermostat and beige cover. Tradeline Kit 5 F to 25 F Order Cover Separately Wide Throttling Range 5-25 F **A Tradeline Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) for new installations or to convert newer, small size Honeywell or competitor thermostat, not requiring a wall plate adapter. A Convertastat Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a small Universal Wall Plate Adapter to convert newer, small size Honeywell or competitor thermostats. A odernization Kit includes a TP970 Series thermostat with Satin Chrome Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a large Universal Wall Plate Adapter to convert older thermostats. 10 customer.honeywell.com

19 Thermostats TP971 Pneumatic Day/Night Thermostat Pneumatic thermostat with night setback used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell two-pipe pneumatic thermostats. Durable TP970 series thermostat Pilot operated for high capacity. Direct Acting (DA) and Reverse Acting (RA) models are available. Three-pipe thermostats are available for unit ventilator applications where the outdoor damper must operate when the thermostat is manually set to day operation. Adapter plate in thermostat kits covers existing thermostat watermark. Backplate has molded air connections-no separate fittings needed. Universal Locking cover with satin chrome finish and horizontal, vertical, or blank window options-other covers available. TP971 Typical Piping Application Type: Wall Thermostat, Day/Night operation Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Airflow Usage: scfm (5.2 ml/s) ounting: Wall Operating Temperature: 100 F maximum Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: No Setpoint: Day/Night Sensor Element: Bimetal aximum Operating Pressure: 25 psi (170 kpa) Accessories: Duct Sampling Chamber Thermostat Guard Product Number DAY 13 PSI (90 kpa) NITE 18 PSI (124 kpa) TP971A2003 TP971A2011 TP971A2029 TP971A2052 TP971A2086 B TP971A OR TP9610A N.O. HOT WATER OR STEA SUPPLY C Action Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Number of Pipes Setpoint Temperature Range Setpoint Extension Setpoint Cam Assembly for TP971A, C, D; TP972A1168, A2168, A Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. Replacement Parts: Filter Cartridge Assembly Back Plate Assembly Restrictor Block Assembly,.005 in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP Nozzle, Throttling Plate and Bimetal Assembly, DA, Left side Nozzle, Throttling plate and Bimetal Assembly, reverse acting, left side Changeover Throttling Range (F) (C) (psi) (kpa) (F) (C) 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 15 C to 30 C, Night: 10 C to 27 C 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 15 C to 30 C, Night: 10 C to 27 C 2 Day: 60 F to 90 F, Night: 50 F to 80 F Day 13 psi, Night 18 psi Day 13 psi, Night 18 psi Day 16 psi, Night 21 psi Day 16 psi, Night 21 psi Day 20 psi, Night 25 psi Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 110 kpa, Night 144 kpa Day 110 kpa, 144 kpa Day 137 kpa, Night 172 kpa 2 F to 10 F 1 C to 5 C 2 F to 10 F 1 C to 5 C 2 F to 10 F Includes Order Cover Separately Order Cover Separately Order Cover Separately Order Cover Separately Order Cover Separately Comments** Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

20 Thermostats Product Number TP971A2102 TP971A2183 TP971A2191 TP971B2001 TP971B2019 TP971B2043 TP971B2068 TP971C2009 TP971C2017 TP971C2025 TP971C2058 Action Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Reverse Acting Heating, two temp. Reverse Acting Heating, two temp. Reverse Acting Heating, two temp. Reverse Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Direct Acting Heating, two temp. Number of Pipes Setpoint Temperature Range 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 2 Day: 60 F to 90 F, Night: 50 F to 80 F 3 Day: 60 F to 90 F, Night: 50 F to 80 F 3 Day: 15 C to 30 C, Night: 10 C to 27 C 3 Day: 60 F to 90 F, Night: 50 F to 80 F 3 Day: 60 F to 90 F, Night: 50 F to 80 F Changeover Day 13 psi, Night 18 psi or psi Day 13 psi, Night 18 psi or psi Day 13 psi, Night 18 psi or psi Day 13 psi, Night 18 psi Day 16 psi, Night 21 psi Day 20 psi, Night 25 psi Day 13 psi, Night 18 psi or psi Day 13 psi, Night 18 psi Day 13 psi, Night 18 psi Day 16 psi, Night 21 psi Day 13 psi, Night 18 psi or psi Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 110 kpa, Night 144 kpa Day 137 kpa, Night 172 kpa Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 90 kpa, Night 124 kpa Day 110 kpa, Night 144 kpa Day 90 kpa, Night 124 kpa Throttling Range (F) (C) (psi) (kpa) (F) (C) 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F 1 C to 5 C 2 F to 10 F 2 F to 10 F Includes Thermostat, small wall plate and satin chrome cover. Thermostat, small wall plate and beige cover. Thermostat and satin chrome cover. Order Cover Separately Order Cover Separately Order Cover Separately Thermostat and satin chrome cover. Order Cover Separately Order Cover Separately Order Cover Separately Thermostat and Satin Chrome Cover Comments** Convertastat Kit Convertastat Kit Tradeline Kit Tradeline Kit Has secondary branchline Has secondary branchline Has secondary branchline Tradeline Kit. Has secondary branchline. **A Tradeline Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) for new installations or to convert newer, small size Honeywell or competitor thermostat, not requiring a wall plate adapter. A Convertastat Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a small Universal Wall Plate Adapter to convert newer, small size Honeywell or competitor thermostats. A odernization Kit includes a TP970 Series thermostat with Satin Chrome Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a large Universal Wall Plate Adapter to convert older thermostats. 12 customer.honeywell.com

21 Thermostats TP972 Pneumatic Heating/Cooling Thermostat Two-pipe, one- or two-temperature, pneumatic thermostat used to provide proportional control of pneumatic valves and damper actuators in heating and air conditioning systems. Replacement kits are available for Johnson, Powers, Robertshaw, Barber- Colman, and older Honeywell two-pipe pneumatic thermostats. Durable TP970 Series Thermostat. Pilot operated for high capacity. Two-temperature energy conservation model available. Adapter plate in Convertastat kits covers existing thermostat wallmark. Backplate has molded air connections-no separate fittings needed. Universal locking cover with satin chrome finish and horizontal, vertical, or blank window options with Tradeline model-other covers available. TP972 Typical Piping 13 PSI (90 kpa) RA S/W 18 PSI (124 kpa) DA HOT WATER/CHILLED WATER SUPPLY Accessories: Duct Sampling Chamber Thermostat Guard to 25 psi spring Setpoint Extension Wallplate adapter kit. Adapts HP970 or TP970 series stats to HP900 and TP900 flush mounted and TP910 series flush or surface mounted installations Setpoint Cam Assembly for TP970A1004, A1012, A1020, A1038, A1046, A1053, A1095, A2004, A2012, A2020, A2038, A2053, A2095; TP970C; TP972A1143, A2143; TP973A1001, A1019, A Setpoint Cam Assembly for TP970B1002, B1010, B1028, B1036, B2002, B2010, B2028, B2036; TP970D; TP972A1002, A1010, A1028, A1044, A2002, A2010, A2028, A2044; TP973B1009, B1017, B1025, B Setpoint Cam Assembly for TP971A, C, D; TP972A1168, A2168, A Setpoint Cam Assembly for TP970B1044; TP972A1051, A1101 Product Number B N.O. Number of Pipes TP972A OR TP9620A C Setpoint Setpoint Temperature Range Changeover Application Type: Wall Thermostat, Heat/Cool Operation Dimensions, Approximate: 3 1/4 in. high x 2 in. wide x 1 5/8 in. deep (83 mm high x 51 mm wide x 41 mm deep) Action: Direct Acting Heating, Reverse Acting Cooling Airflow Usage: scfm (5.2 ml/s) ounting: Wall Operating Temperature: 100 F maximum Storage Temperature: 150 F maximum (66 C maximum) Remote Bulb: No Sensor Element: Bimetal aximum Operating Pressure: 25 psi (170 kpa) /2 in. diameter, 1/8 NPT center stem back mount Pressure Indicating gauge (0 to 30 psi scale) with +/- 4% accuracy AK3863 Honeywell Thermostat Tool Kit, TP970/TP900 CCT729A Gauge Adapter for Calibration. Add to 30 psi gauge for Complete Tool. CCT735A Thermostat Calibration Tool includes Allen wrench for cover installation. Replacement Parts: Filter Cartridge Assembly Restrictor Block Assembly,.005 in., For TP970A-D; TP971A-E except C; TP972A; TP973A-B; TP9600 family; HP970A-B; and HP972B odernization Kit to convert all 1 & 2 pipe Honeywell & competitive pneumatic stats to TP970, TP971A, TP972, TP973, TP974, TP9600 family; HP970, HP971 and HP Nozzle, Throttling Plate and Bimetal Assembly, DA, Left side Nozzle, Throttling plate and Bimetal Assembly, reverse acting, left side Throttling Range (F) (C) (psi) (kpa) (F) (C) TP972A Single 60 F to 90 F Heat 18 psi, Cool 13 psi TP972A Single 15 C to 30 C Heat 18 psi, Cool 13 psi TP972A Dual Heating 50 F to 75 F, Cooling 60 F to 90 F Heat 18 psi, Cool 13 psi Heat 124 kpa, Cool 90 kpa Heat 124 kpa, Cool 90 kpa Heat 124 kpa, Cool 90 kpa 2 F to 10 F 1 C to 5 C 2 F to 10 F Includes Order Cover Separately Order Cover Separately Energy Conservation odel, Order Cover Separately Comments** Two concealed setpoint knobs Humidistats and Thermostats Controllers Sensors Relays Switches Actuators Valves Accessories Engineering Guide Cross Reference

22 Thermostats Product Number Number of Pipes Setpoint Setpoint Temperature Range Changeover TP972A Single 60 F to 90 F Heat 14 psi, Cool 19 psi TP972A Single 60 F to 90 F Heat 18 psi, Cool 13 psi TP972A Single 60 F to 90 F Heat 14 psi, Cool 19 psi TP972A Single 60 F to 90 F Heat 18 psi, Cool 13 psi Heat 96 kpa, Cool 131 kpa Heat 124 kpa, Cool 90 kpa Heat 96 kpa, Cool 131 kpa Heat 124 kpa, Cool 90 kpa Throttling Range (F) (C) (psi) (kpa) (F) (C) 2 F to 10 F 2 F to 10 F 2 F to 10 F 2 F to 10 F Includes Order Cover Separately Thermostat, small wall plate and satin chrome cover Thermostat and satin chrome cover. Thermostat and satin chrome cover. Comments** Convertastat Kit Tradeline Kit Tradeline Kit **A Tradeline Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) for new installations or to convert newer, small size Honeywell or competitor thermostat, not requiring a wall plate adapter. A Convertastat Kit includes a TP970 Series thermostat with either a Satin Chrome or Beige Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a small Universal Wall Plate Adapter to convert newer, small size Honeywell or competitor thermostats. A odernization Kit includes a TP970 Series thermostat with Satin Chrome Universal Cover, Windows (horizontal (F), vertical (F) and blank) and a large Universal Wall Plate Adapter to convert older thermostats. 14 customer.honeywell.com