I NDUSTRIAL T HERMOMETERS. New! Sky Blue Fill Economy Line Classic Line Prover Tank Air Duct Water Lines Narrow Case All Angle Multi-Sensing

Transcription

1 I NDUSTRIAL T HERMOMETERS New! Sky Blue Fill Economy Line Classic Line Prover Tank Air Duct Water Lines Narrow Case All Angle Multi-Sensing

2 Economy s Model 9AL 9FL 9ALSB 9FLSB Economy NEW SKY BLUE Fill (SB) Environmentally Safe Models are filled with a non-toxic, mercury-free Blue Liquid. SB Models are available in 9" Cases, with either -/2" or 6" Stem Lengths, Ranges up to 00 F. Optional Red Spirit Fill also available. Flex Angle Adjustment: Just two screws permit cases to be rotated 80 and stems to be positioned in 0 increments. Users can infinitely adjust Economy Line to virtually any viewing angle required. Easy Readability: Standard Lens front glass tube is Red Reading Mercury-Filled or Sky Blue Fill. Compact, yet visible 9" (229mm) Plastic or Aluminum, or 2" (05mm) Aluminum (only) cases, fitted with a V shaped white aluminum scale graduated with bold black lines and numerals. Accuracy: Economy Line are calibrated against standards traceable to the National Institute of Standards and Technology (NIST) and are guaranteed accurate to ± scale division. Construction: User selection of either tough, black-finished molded high temperature Plastic Case (9FL Models) or extruded, black-finished Aluminum Case (9AL or 2AL Models). Glass crystal, machined Brass Swivel Nut, and cast aluminum stem and seat are standard on all -/2" stems. Connection Assembly: Tapered Bulb Chamber allows maximum metal-to-metal contact with matching tapered thermowell for fast response and increased accuracy. Brass Swivel Nut is industry standard -/" -8 UNEF thread. Range and Stem Length Selection: Full selection of Fahrenheit or Dual F & C Range scales available from -0 to 550 F ( -0 to 290 C). Stock stem lengths are.5" (89 mm), 6" (52 mm), 8" (20 mm), 9" (229 mm), and 2" (05 mm). Air Duct Construction: Air Duct Models feature a super-sensitive bare bulb protected by a /" diameter perforated brass bulb guard. This design allows exposure to circulating air while still protecting the glass tube from any impact. Environmentally Safe, Sky Blue Fill Thermometer TEMPERATURE RANGE CODES F Range Codes Div Dual, F & C Range Codes Div -0/0F 2 F -0/0F / -0/C 2 F/2 C 0/20F F 0/20F / -7/9C F/0.5 C 0/60F 2 F 0/60F / -7/7C F/0.5 C 20/80F 2 F 20/80F / -6/82C 2 F/ C 0/20F 2 F 0/20F / 0/5C 2 F/ C 0/00F 2 F 0/00F / -/9C 2 F/ C AL only 50/00F* 5 F 50/00F / 0/20C* 5 F/2 C AL only 00/550F* 5 F 00/550F / 0/290C* 5 F/2 C * Not available in environmentally safe Sky Blue Fill BASE MODEL NUMBERS Aluminum Case Plastic Case Mercury Fill Sky Blue Fill Mercury Fill Sky Blue Fill Case Size 9" Scale* 9" Scale* 9" Scale* 9" Scale* 9" Scale 9" Scale 9" Scale 9" Scale Bulb Type Tapered Air Duct Tapered Air Duct Tapered Air Duct Tapered Air Duct Stem Length:.5" (89mm) 9AL.5 N/A 9ALSB.5 N/A 9FL.5 N/A 9FLSB.5 N/A 6" (52mm) 9AL6 9ALAD6 9ALSB6 9ALADSB6 9FL6 9FLAD6 9FLSB6 9FLADSB6 8" (20mm) 9AL8 N/A 9AL8** N/A 9FL8 N/A 9FL8** N/A 9" (229mm) 9AL9 N/A 9AL9** N/A 9FL9 N/A 9FL9** N/A 2" (05mm) 9AL2 9ALAD2 9AL2** 9ALAD2** 9FL2 9FLAD2 9FL2** 9FLAD2** * Optional 2 Aluminum Case available. ** Available in Red Spirit Fill only, add Code RS to Model Number 2 (800) FAX (828)

3 Model 9AL 9FL 9ALSB 9FLSB Form Case Case Size Stem Material All Angle Adjustable SPECIFICATIONS Painted Aluminum (AL) or molded Plastic (FL) 9" (220mm) Plastic or Aluminum Case, optional 7" and 2" available Standard cast Aluminum Stem and Seat Stem Length Listed in Base Model table, pg 2 Ranges Listed in Range table, pg 2 Bulb Fitting Scale Face Glass Tube Crystal Accuracy Calibration Warranty Choice of tapered Bulb Chamber or perforated Air Duct design -/ - 8 UNEF machined Brass Swivel Nut High visibility V-shaped painted white aluminum scale, black markings Red Reading Mercury Fill, Sky Blue Fill, Red Spirit Fill optional Glass Crystal Standard Accurate to ± scale division Calibrated to NIST traceable standards One year limited warranty OPTION CODES Options Description How to Order 7" (78 mm) Case Substitute 7 in place of 9 inch Scale in (Sky Blue not available) Base Model No. Table 2" (05 mm) Case Substitute 2 in place of 9 inch Scale in (Sky Blue not available) Base Model No. Table Brass Stem and Seat Option code B Plastic Crystal Option code PC Red Spirit Fill (00 F/50 C limit) Option code RS Stainless Steel Stem/Seat material Option code S Adjustable, Tilting Air Duct Flange Order Part No. 58 as a separate item Flanged Union Connection Order Part No. 0-9 or -9, see p.6 0.in.69 in Set Screw Tapered Economy s 2.5 in stem length 8.8in 0.5 in Lock Screw 0.25 in Swivel Nut Seating Disk 0.6 in Dia. 0. in Dia..25 in Base Model No. Temp. Range Option Code Sample Model Number 9FLAD6 0/20F & C B Sample Description 9" Case 0/20 F & 0/ C Brass Stem Plastic Case Dual Scale Range and Seat Air Duct 6" Stem Dimensions for 9 Case Models ECONOMY THERMOWELLS REGULAR SERIES THERMOWELLS LAGGING EXTENSION THERMOWELLS Well Stem Insertion Model Stem Insertion Lagging Model Material lgth. S lgth. U No. lgth. S lgth. U Ext. T No. Cast Brass.5" 2.5" A.5".75" " -20-0A Cast Brass 6" 5" A 6" 2.5" 2.5" A Mach. Brass 8" 7" " " " Mach. Brass 9" 8" " 5" " Mach. Brass 2" " " 8" " For a full listing of Thermometer Thermowells and Union Connections, Please Request catalog No I U insertion length 2 D dia 2 D 2 2 dia. 6 6 T I U insertion length 2 D dia 2 D 2 2 dia. 6-8 NEF THREAD 5 8 P NPT S stem length 0.80 taper per fit 0.7 dia 2-8 NEF THREAD 5 8 P NPT S stem length 0.80 taper per fit 0.7 dia 2 Air Duct Stem Model with Bare Bulb (800) FAX (828)

4 Classic s 200 Series 00 Series Classic s Mercury are the most reliable thermometers in the world. Palmer set industry standards for accuracy, quality, and rugged operation. With looks to match their performance, these classic thermometers are designed and constructed for long-term industrial process service. For some applications requiring maximum response time using a union instead of a thermowell, specify one piece stem and bulb. Case Case Styles Glass Tube Scales Connection Bulb: Crystal Glass Fill Styles Accuracy Wells & Fittings SPECIFICATIONS Extruded V shaped brass with chrome finish in 9" or 2" size Straight, 90 Back Angle, Left Side, Right Side, Incline, or Recline Angle Red Reading lens glass thoroughly annealed & aged for permanent accuracy. Individually calibrated. Numerals and graduations are either printed on a painted metal scale, or individually engraved for each glass tube. See table below. Optional Dual Scales available -/" UNEF-8 Brass Swivel Nut connection is standard. Stainless Steel optional Tapered design for maximum contact and heat transfer from Thermowell Stem and Bulb are Stainless Steel Instrument Quality Glass, Plastic optional Red Reading Mercury Fill Standard, Red Spirit Fill optional Standard Case styles, Ranges and Stem Lengths are listed below Contact the factory for custom models and special needs ±/2 scale division, ± scale division if Red Spirit Filled. Special calibration from customer-supplied set points available Palmer Thermowells are listed in Palmer Catalog PW00 STANDARD RANGE CODES 9" 2" 9" 2" CODE CASE CASE CODE CASE CASE F DIV DIV * C DIV DIV 0/00F 0.5 * -8/0C 0.5 0/00F&R 0.5 * 0/80C 0.5 0/80F 2 * 0/5C 0/20F 2 2 * 0/50C 2 70/270F&P * 0/205C 2 2 0/00F 2 2 * 50/00F 5 2 * * Engraved Scale Standard 200/00F 2 2 * OPTIONAL RANGE CODES (ENGRAVED SCALES) 9" 2" 9" 2" CODE CASE CASE CODE CASE CASE F DIV DIV C DIV DIV -0/0F 2-0/5C 0.5-0/0F 2 0/265C 2 2 0/60F 2 95/05C /270F 80/60F /60F&P 2 200/00F 250/00F /550F /600F /750F 5 5 * Example to show position of Stem to Case Model 209 Straight Thermometer BASE MODEL NUMBERS SERIES SERIES CASE STYLE 2" SCALE 9" SCALE Straight Left Side Angle* 268L 68L Right Side Angle* 268R 68R Back Angle Incline 0 Angle 29-0I 9-0I Incline 5 Angle 29-5I 9-5I Recline 0 Angle 29-0R 9-0R Recline 5 Angle 29-5R 9-5R Recline 75 Angle 29-75R 9-75R Recline 05 Angle 29-05R 9-05R Left Side Mount Right Side Mount (800) FAX (828)

5 A Case Configuration for 5 Recline 200 Series 00 Series Classic s Straight Case Configuration in (25.mm) 5/8 in (5.9mm) C stem 2-5/6 in (58.7mm) 0.25in (6.mm) Other Possible Configurations ORDERING INFORMATION To select a thermometer, please specify the following: ) Base Model Code for case size and case style from the table on page. 2) Stem Length Code from the table to the right. ) Range Code from tables on page. ) Specify any required options from the Option Codes table below..25 in -8 swivel nut 5/8 in O.D. (5.9mm) Tapered 7/6 in (.mm) /8 in (9.5mm) in (25.mm) 2.5 in (6.5mm) Stem OPTION CODES Option Code Option Code Case Drain Holes DH Dual Scale DS One-Piece Stem/Bulb OPS Red Spirit Fill (up to 00 F) RS Special Engraved Scale ES 0 SS Swivel Nut SN Plastic Crystal PC Sample Model Number /20F (RS) Sample Description 90 Back.5" Stem 0 to 20 F Red Spirit Fill Angle, 9" Case Length Range Option STEM LENGTH CODES CODE LENGTH IN. MM PROVER TANK INDUSTRIAL THERMOMETERS Prover Tank Range: 0/ to 20 F, (/2 divisions) Over-range reservoir to 50 F Nickel Scale to resist gasoline vapors. 2" Case only PROVER TANK 2" Base Model Numbers Stem Straight 90 Back Left Side Right Side 0 Incline 0 Recline Length Angle Mount Mount Mount Mount.5 20P.5 20PBA.5 20PLS.5 20PRS.5 20PI.5 20PR P6 20PBA6 20PLS6 20PRS6 20PI6 20PR6 8 20P8 20PBA8 20PLS8 20PRS8 20PI8 20PR8 2 20P2 20PBA2 20PLS2 20PRS2 20PI2 20PR2 NOTE: Longer Stem Lengths available on request. Add Range Code (0/20F) to Base Model Number above to complete a Prover Tank Model number. (800) FAX (828)

6 All Angle Model AA 2AA All Angle Palmer All Angles are a versatile solution to many problems encountered in ordering, stocking, and replacing. One thermometer can be infinitely adjusted to virtually any installation and viewing angle, greatly simplifying engineering and purchasing operations. Their versatility also aids in keeping both the inventory of back-up replacement thermometers and process down time at a minimum. Model AA 9" Long (229mm) Wide Case or Model 2AA 2" Long (78mm) Wide Case Red Reading, Mercury-Filled tubes for high visibility & accuracy, Red Spirit Fill optional -/"-8 UNEF Brass Swivel Nut for fast, easy installation Durable, rugged design for maximum versatility Accuracy within /2 scale division Full choice of stem lengths, temperature ranges, and options SPECIFICATIONS AA 2AA Case Length 9" 2" (229mm) (05mm) Case Width 2.25" (57mm) 2.25" (57mm) Case Material Aluminum Aluminum Crystal Instrument Glass Scales Metal scales with black numerals & graduations on baked enamel finish Glass Tube Red Reading lens glass thoroughly annealed & aged for permanent accuracy. Individually calibrated. Red Spirit Fill optional (up to 00 F) Swivel Nut -/" -8 UNEF Brass* -/" -8 UNEF Brass* Bulb Chamber Stainless steel, tapered Stainless steel, tapered 0.7" (mm) 0.7" (mm) Accuracy Within /2 scale division * Stainless Steel optional STEM LENGTH CODES CODE LENGTH IN MM.5.5" " " " 05 STANDARD RANGE CODES F CODE DIV C CODE DIV -0/0F 2-5/55C 0/00F 2-8/0C 2 0/80F 2 0/80C 2 0/20F 2 0/5C 0/00F 2 0/50C 2 50/00F 5 0/205C 2 Model AA All Angle THERMOWELLS AND FITTINGS For Tapered Bulbs (AA) use 0 Series Thermowells and Fittings For a complete listing of Palmer Thermowells and Fittings, request Catalog PW00. 8 (800) FAX (828)

7 Model AA 2AA All Angle 2 in (57.2mm) 2AA 2 All Angle 2 in (57.2mm) AA 9 All Angle 0 in in (0.2mm) (25mm) 0 in (25mm) 2 in (8mm) 2 in (8mm) in Dia. (7.2 mm) in (.5mm) in Dia. Stem (7.2 mm) Length + /8 (.2mm) in (.5mm) Stem Length + /8 (.2mm) All Angle Profile ORDERING INFORMATION To select a thermometer, please specify the following: 0.8 in Dia. (. mm).) Base Model Number: AA 9" Case All Angle 2AA 2" Case All Angle 2.) Add Stem Length Code from table on page 8..) Add Temperature Range Code from table on page 8.) Specify any required options from the Option Code table at right. Sample Model Number AA 6 0/80F ES Sample Description 9" Case 6" Stem 0 to 80 F Engraved Scale All Angle Length Range Option 0.8 in Dia. (. mm) OPTION CODES Option Code 9" (AA) 2" (6AA) Drain Holes DH Dual Scale DS Engraved Scale ES Standard One Piece Stem OPS Plastic Crystal PC Red Spirit Fill RS SS Swivel Nut SN Available for this Model. (800) FAX (828)

8 Multi-Sensing Multi-Sensing Palmer Multi-Sensing easily integrate into computerized monitoring and control systems while retaining analog instrumentation reliability as an important backup reference. Multi-Sensing also have the advantage of retrofitting electronic sensors into existing wells without additional electrical or mechanical connections. Now available with Wahl Thermocouple or RTD Sensors, matching Meters, Calibrators, and Accessories for a total Multi-Sensing Thermometer package. Durable and Accurate: Liquid-in-glass Thermometer with One or Two Electronic Temperature Sensors and Output connections. 9" or 2" Case Sizes: Full selection of Case Angle styles. Swivel Nut Connection: /" -8 UNEF Brass Swivel Nut Connection (Stainless Steel option). Individually Calibrated: Metal scales are individually calibrated to annealed and aged glass tubes for long term accuracy and reliability. Maximum Metal to Metal Heat Transfer: Tapered Bulb design for maximum metal to metal heat transfer with resulting accuracy and speed of response. Sensors: Available with One or Two RTD or Thermocouple Electronic Sensors Select: 2,, -Wire, 85 DIN Pt00 RTD, or Type J or K Thermocouple. Other Sensor types available on request. RTD Meter Connection (option M) on back of to Wahl 92M Close-up of Terminal Block with /2" Conduit Connector (option T). Terminal block with /2 diameter Conduit Connector. One or Two Electronic Sensor/Output Connections can be specified. WAHL METER SPECIFICATIONS RTD Meter Type K Thermocouple Meters Model Numbers 92EF ( F) 92MF ( F) 2500M ( F) 2500MVX ( F) 92EC ( C) 92MC ( C) 70M ( C) 70MVX ( C) TM-0 TM ED ( F & C) 92MD ( F & C) N/A N/A ( F & C) ( F & C) Range -290 to 50 F -60 to 752 F -00 to 2500 F -00 to 2500 F -0 to 999 F -28/298 F -80 to 788 C -5 to 00 C -70 to 70 C -70 to 70 C -0 to 092 C -200/70 C Display Type LED LED LED LCD LCD LCD Power Source 6.25V Rechg. 6.25V Rechg. 6.25V Rechg. one 9V. three AAA one 9V. battery pack battery pack battery pack battery batteries battery Resolution 0. from -290 to 0. to.0 F or C.0 F or C 0. at -0 to 0., F or C 75 F (90 C) 75 F (90 C) 99.9 F or C Auto Ranges Auto Ranges F above 75 F above 75 F and above Input Connector Conductor Conductor Standard Thermocouple Mini Connector Meter Accuracy ±0. F/C ±0. F/C ±0.2% of reading ±0.2% of reading ± F at 2 to 200 C ±0.5% of reading at 77 F ± one 2 F/ C ± one 2 F/ C ± one 77 F ± one 77 F ±0.5 C at 0 to 9 C +. F(0.7 C)@ 77 F Features Auto Range Auto Range Auto Zero Auto Zero Low Battery Dual Input 0 (800) FAX (828)

9 Multi-Sensing Multi Sensing OPTIONS AND ORDERING INFORMATION BASE MODEL NUMBER 9 2 CASE STYLE CODE CODE All Angle AA 2AA Straight Back Left Side Angle 68L 268L Right Side Angle 68R 268R Incline Angle 9I 29I Recline Angle 9R 29R STEM LENGTH CODES CODE IN. MM To select a Multi-Sensing Thermometer, specify the following from the tables below: ) Base Model Number from table at left 2) Stem Length Code from table at left ) Add Temperature Range Code from table below left ) Select Sensor Code and 2 (if applicable) from table below 5) Select Connection Code and 2 (if applicable) from table below 6) Select Option Code from table below. Sample Model Number Case Stem Range Sensor Connection Sensor Connection Options /20F K MC R T (DH) *Use XX in part number if 2nd Sensor and Connection are not applicable. SELECT SENSOR AND SENSOR 2 Type J Thermocouple Type K Thermocouple Pt00-2 wire Thin Film RTD (85 DIN) Pt00- wire Thin Film RTD (85 DIN) Pt00- wire Thin Film RTD (85 DIN) CODE J K RT2 RT RT Other Sensors available upon request STANDARD RANGE CODES 9" 2" 9" 2" CODE CASE CASE CODE CASE CASE F DIV DIV C DIV DIV 0/00F 0.5-8/0C 0.5 0/00F&R 0.5 0/80C 0.5-0/0F 2 0/5C 0/80F 2 0/50C 2 0/20F 2 2 0/205C /270F 70/270F&P 0/00F /00F 200/00F&P 50/00F /00F 2 2 Thermocouple Mini Connection (option MC) on back of Case to Wahl TM500 SELECT CONNECTION AND CONNECTION 2 RTD Meter Connection to Wahl 92 M only Terminal Block & /2" Conduit Connector for RTD or Thermocouple Thermocouple Mini Connector CODE M OPTION CODES CODE DESCRIPTION DH Drain Holes ES Engraved Scales PC Clear Plastic Crystal RS Red Spirit Fill* SN SS Swivel Nut * Required for ranges beginning below -0 F/ C; maximum up to 00 F/50 C T MC Other Connections available upon request (800) FAX (828)