Scanning RF Transceivers with Integrated Recording & Playback and 10 GbE Data Networks for User Application Development

Transcription

1 Spectrum Intelligence from D-TA Nothing Else Come Close! Scanning RF Transceivers with Integrated Recording & Playback and 10 GbE Data Networks for User Application Development Single or Multiple Antennas, Commercial or Rugged...

2 Scanning RF Transceivers D-TA s Scanning RF Transceivers are light-years ahead of others. Nothing else available in the market can offer so much functionalities for so little cost. D-TA s Scanning RF Transceivers offer: compact systems with shock-protected packaging both receive & transmit functions full bandwidth recording & playback low-phase noise, large dynamic rage, fast scanning over a wide frequency range built-in DDC & DUC (FPGA based) for programmable processing-bw selection replicated 10 gigabit data network (with VITA 49 compliance option) for user application development in a separate computer (server class). capability to do processing simultaneously while recording SigInspector TM control GUI for signal detection, record & playback without requiring user development future-proof architecture that can be scaled up to handle larger bandwidths and/or more channels (antennas) All D-TA products are based on the 10 Gigabit Sensor Processing (10 GSP) concept pioneered by D-TA. The 10 GSP offers virtually limitless scalability in terms of throughput rate expansion, Os independence and easy connection to multi-core server(s) for post processing. D-TA offers a multi-core software development framework for rapid application development using commercially available or D-TA supplied server(s). In addition D-TA offers, application development support and hands-on training to speed up user development.

3 Wideband Scanning Transceiver with Integrated Real-Time Recording & RF Playback (20 MHz 6 GHz) RF In RF Out RF / IF X X LOs DTA-3290 RFvision-1 Wide Band Transceiver Fully configured 2U solution based on DTA-3290 SDR and DTA-1000-R Server with storage (8 TB) Packaged in a portable case with a shock-mounted rack for convenient field deployment 20 MHz to 6 GHz frequency coverage; RFvision-1-ER extends the coverage to up to 18 GHz using Block Converters 16 Bit data converters & FPGA based DSP 8 db Noise Figure, 73 db low & high tone discrimination Fast Scanning Typical Phase Noise <-100 KHz offset Programmable Gain Control (91 db in 1 db steps) Programmable DDC based BW selection for processing (1. 25, 2.5, 5, 10, 20 or 40 MHz). Real-time recording of 40 MHz BW signal for over 11 hours (with 8 TB storage) RF playback of recorded or computer generated data (for RF Test or long-term scenario Generation) Replicated 10 GbE network (with VITA 49 Compliance option) for convenient user application development. Convenient & failsafe (SigInspector TM ) control GUI Plug & play system for record & playback. IF / Baseband (I & Q) Replicated 10 GbE Network (Data) for user processing DTA-1000-R (Record/Playback) 100 MHz ADC 10 GbE Network (Data) FPGA DAC Multi-Core Server with 8 TB Storage 1 GbE Control 75 MHz IF, 40 MHz IBW 16-Bit ADC & DACs DDC & Network 1 GbE RFvision-1 Wideband System Block Diagram RFvision-1 ER extends the frequency range to 18 GHz by using Block Up & Down Converters at the input & output of RFvision-1 Replicated 10 GbE data network allows user application development in a separate server. D-TA offers SDK, application examples and training to speed up user development. D-TA also offers custom development. If recording is not desired the DTA- 100-R or any other server can also be used for processing

4 User PC Screen 20 MHz 6.0 GHz 40 MHz FFT of Activity Selected from Waterfall Display Waterfall Record Button Signal Power - Current & Previous Scans (Max-Hold) Occupancy Log D-TA s SigInspector TM software for RFvision-1 offers Intuitive & failsafe GUI for easy navigation and selecting the RF signals to record and data files to playback from the user PC

5 Fully Featured BlackCat TM SIGINT Solution Capabilities Network Enabled Broadband Spectral Analysis Broadband/Narrowband Quadrature Conversion Signal Thresholding and Activity Detection Broadband Channelization & Narrowband Extraction Narrowband Digital Down Converters (DDCs) Narrowband Data Streaming Automatic Modulation Recognition (AMR) Protocol Analysis Voice Activity Detection Signature Matching Data Recording and Playback Optional Direction Finding System Pulse Detection (ELINT Option) Pulse Extraction and Characterization (ELINT option) Unlimited Configurations Automatic Mission Setups GPS Rx DTA-3290 Server The BlackCat system is based on DTA-3290 Receiver. It is one of the most powerful complete SIGINT solution available in the market. Contact factory for more information.

6 Ultra-Wideband Scanning Transceiver with Integrated Real-Time Recording & Playback (500 MHz 26.5 GHz) RF In RF / IF X LOs DTA GHz IF, 500 MHz IBW Optional IF Out 12-Bit ADC & DAC ADC DAC DTA-9500 IF / Baseband (I & Q) FPGA DDC & Network RFvision-2 Ultra-Wide Band Transceiver Fully configured 5U solution based on DTA-5900 Wideband tuner, DTA-9500 SDR and DTA-5000 Server with storage (9.6 TB) Packaged in a portable case with a shock-mounted rack for convenient field deployment 500 MHz to 26.5 GHz frequency coverage with 500 MHz IBW 12 Bit data converters & dual Virtex 6 FPGAs with DDC & network cores 63 db SFDR; 1 KHz Scan resolution; low phase noise; and fast scan Programmable DDC based BW selection up to 500 MHz Real-time recording of 500 MHz BW signal for over 90 mins Replicated 10 GbE networks (with VITA 49 compliance option) for user processing in a separate computer that allows simultaneous processing while recording Convenient & failsafe GUI, also supplied with API for user development Plug & play system for record & playback 10 Gigabit Networks (Data) for user processing DTA-5000 (Record/Playback) Dual 10 GbE Multi-Core Server with 9.6 TB Storage 1 GbE Control 1 GbE RFvision-2/ (500) Ultra-Wideband (500 MHz BW) System Block Diagram RFvision-2/ (160) System offers 160 MHz & 80 MHz BW options. The IF is 160 MHz. The RFvision-2/(1000) System Offers 1 GHz BW. The IF is 1.8 GHz. Note that DTA-5000 (3U) system can be replaced by DTA-1000-SSD (1U) server for reduced storage (4 TB) requirement and small size (3U).

7 Turning Recorded Data Into Information (Time, Frequency, Pulse, Wireless...) Post Processing For post-analysis of recorded data by MATLAB, Spectro-X or other software programs, contact factory

8 Multiple Independently Tuned RF Transceivers (40 MHz IBW each) for Fast Frequency Hop Signal Detection (by bandwidth expansion) or for Multiple Search & Track Each DTA-3290 can be independently tuned. Thus it is possible to have a gapless search BW of close to 160 MHz. Rx & TX Merged 10GbE (Data) Rx & TX 10GbE (Data) Each 10 GbE network can sustain a data rate over 1 GBytes/s. The data rate is 800 Mbytes/s with 4 DTA for 40 MHz BW Rx & TX 10GbE (Data) 1GbE (Control) User PC for Control Rx & TX 10GbE (Data) A 5U Quad Configuration (RFvision-1-I4RI4T)

9 Multi-Antenna System Configuration - Phase Coherent Tuning Using DTA-3200 Multi-Antenna RF/IF, DTA-2300 Multi-IF Software Radio Transceiver and DTA-5000/DTA-1000-R Record/Playback systems any number of Rx & Tx channels (4, 8, 12, 16 or more) can be readily configured. The key features are: Phase coherent tuning (common LOs) from 20 MHz to 6 GHz with 40 MHz IBW; 16-bit data converters, FPGA based programmable DDCs & DUCs for real-time processing of BWs up to 40 MHz ADC & DAC Sample Clocks can be individually adjusted in steps of 10 ps for RF & cable mismatch calibration Up to four (4) 10 Gigabit networks for moving data in real time to server(s) for record, playback and processing Tuneable RF (20 MHz 6 GHz) DTA-3200 X X Common LOs DTA-3200 RF/IF (3U) DTA-2300 One or more 10 GbE networks DTA-5000 ADC FPGA DAC Server /RAID 75 MHz IF, 40 MHz IBW DDCs, DUCs, Networks, Custom Core. Replicated 10 GbE networks for simultaneous processing while recording RFvision-1 (xryt) DTA-2300 IF/ Baseband (1U) DTA-5000 Processing/Record /Playback (3U) Single Channel Block Diagram

10 Rugged & Compact Solutions For applications in harsh environments (land, air & sea), a rugged & compact solution can be readily configured using D-TA s rugged subsystems. Conduction-cooled DCON, UCON & Synthesiser modules (20 MHz to 6 GHz) Conduction-cooled 8-Ch DTA-2300 (Digital IF Transceiver) Rugged Server with SSD Storage

11 Rugged & Compact Solutions (Cont d) Conduction-cooled Ultra- Wideband Tuner (500 MHz) DTA-9500 Conduction-cooled DTA-9500 that includes a 3.6GSPS 12-bit ADC, 4 GSPS 12-bit DAC and up to four 10 GbE optical networks Rugged Server/ Recorder Rugged Ultra-Wideband (500 MHz) digitization, recording & playback

12 Making ISR Easier Highest Performance & Lowest Cost...Nothing Else Comes Close! United States: D-TA Systems Corporation 900 Bestgate Road Suite 102 Annapolis, MD Phone: (508) International: D-TA Systems, Inc 2500 Lancaster Road Ottawa, ON, K1B 4S5 Canada Phone: (613) Fax: (613)