Hazard Recognition and Identification
|
|
|
- Annice Bradley
- 7 years ago
- Views:
Transcription
1 Hazard Recognition and Identification Safety Meeting
2 Hazard A hazard is any source of potential damage, harm or adverse effects on something or someone under certain conditions.
3 Hazard Examples of hazards include Tools Equipment Machinery Materials Environment People/actions System flaws
4 Hazard A hazard only describes the initial conditions for accidents in the jobsite It takes hazards and exposure before an accident can occur
5 Exposure Exposure is when you are at risk from a hazard. Three forms of exposure Physical exposure Environmental exposure Potential exposure
6 Exposure Physical exposure Your proximity to a danger zone Environmental exposure Regardless of distance from the source Potential exposure The possibility that you could be exposed
7 Sources of Hazards Gravity Motion Mechanical Electrical Biological Pressure Temperature Chemical Radiation Sound
8 Gravity Gravity is the force of attraction by which universal bodies fall toward the center of the earth. Throwing a ball up in the air Jumping rope Tripping or falling
9 Motion Motion is the action or process of moving or changing place or position; movement. Car moving on a road Flowing water Lifting or bending
10 Mechanical Mechanical energy is the energy of an object due to its motion or position. Conveyer belt Grinder Ferris wheel Drill
11 Electrical Electrical energy is the presence and flow of an electric charge. Transformers Static electricity Wiring Lightning
12 Biological Biological energy is the energy transactions in living organisms. Bacteria Viruses Animals Contamination
13 Pressure Pressure is the continuous physical force exerted on or against an object by something in contact with it. Compressed cylinders Hoses Hydraulic equipment
14 Temperature Temperature is the degree of heat or cold of a body, substance or medium. Fire Nitrogen Steam Sun
15 Chemical Chemical energy is when a substance undergoes a change through a chemical reaction. Burning coal Car running off gas Natural gas as heat source Corrosives
16 Radiation Radiation is the particles or electromagnetic waves (energy) emitted by the atoms of radioactive sources and naturally occurring radioactive materials (NORM). Welding arcs Microwaves X-rays
17 Sound Sound is physical waves travelling through a medium (air or water) that cause a vibration to impact your eardrum. High pressure release Jack hammer Whisper
18 Risk A risk is the chance or probability that you will be harmed or injured if exposed to a hazard. Factors that influence the degree of risk How much a worker is exposed to a hazardous condition How the worker is exposed How severe are the effects under the conditions of exposure
19 Risk Involved in all work related operations Requires decisions that include risk assessment and management Identify risk through knowledge, experience, and job requirements
20 Risk Management Risk management is a proactive means to eliminate or lessen the threat of hazards. You manage risk whenever you modify the way you do something to minimize your chances of injury or loss as small as possible.
21 Risk Management Reduce or eliminate hazards anytime there are changes to work activities Applies to routine changes, such as scheduled maintenance and planned modifications, and non-routine changes The purpose of specialized procedures is to comply with regulations, communicate work activities, and aid the prevention of accidents and releases
22 Identifying Hazards Hazard identification is the systematic observation of unsafe conditions, negative behaviors and weaknesses within the management structure that could lead to injuries and illnesses in the jobsite.
23 Analyzing Hazards Determine the nature of the hazard Processes may include Safety inspections and audits Observations Pre-job reviews Incident and accident analyses
24 Safety Inspections and Audits Examines conditions in the workplace Identifies hazards Evaluates the quality of program design and performance Ensures continuous improvement in Training Resources Enforcement Supervision Leadership
25 Observations Informal Spot unsafe or inappropriate behaviors and hazardous conditions while conducting daily tasks Formal Policies, procedures and events used as tools for gathering and analyzing data to improve overall safety
26 Pre-job Review Examines hazards associated with a specific job Separate the job into basic steps Analyze each step to identify potential and actual hazards Develop safe job procedures Known as Job safety analysis (JSA) Job hazard analysis (JHA) Job safety environmental analysis (JSEA)
27 JSA A process of systematically identifying hazards by breaking down a particular job into a series of relatively simple steps. To eliminate hazards and risks before accidents occur
28 JSA Analyze job specific hazards Prevent workplace injuries and illnesses Improve job planning Establish proper procedures Recognize potential hazards Assure good communication Commit to safety and health
29 Industry Benefits Department ext.5009
30 Student Name: Safety Meetings Hazard Recognition and Identification Quiz Date: Student Instructions: Sign and date this quiz sheet. Circle the letter representing the correct answer to each quiz question below. 1. A hazard is any source of potential damage, harm, or adverse effects on something or someone under certain conditions. A) True B) False 2. Which of the following is not an example of a hazard? A) Tools B) Machinery C) Environment D) PPE 3. Three forms of exposure include physical, environmental, and potential. A) True B) False 4. Which of the following is not an example of motion? A) Car moving on the road B) Flowing water C) Lightning D) Lifting or bending 5. Pressure is the degree of heat or cold of a body, substance, or medium. A) True B) False 6. Chemical energy is when a substance undergoes a change through a chemical reaction. A) True B) False 7. Which of the following is an example of sound? A) High pressure release B) Jack hammer C) Whisper D) All of the above 8. A risk is the chance or probability that a worker will not be harmed or injured if exposed to a hazard. A) True B) False 9. is a proactive means to eliminate or lessen the threat of hazards. A) Zero tolerance policy B) Risk management C) Micro management D) A chemical release 10. Processes to analyze hazards include: A) Safety inspections and audits B) Observations C) Pre-job reviews D) All of the above
31 Safety Meetings Hazard Recognition and Identification Quiz-Answer Key Below is the answer key for the above quiz. Do not print this page when printing the quiz for the students. 1. A 2. D 3. A 4. C 5. B 6. A 7. D 8. B 9. B 10. D
32 Date: Sign-In Sheet for Safe Operations Meeting Conducted By: Means to Verify Understanding: Quiz Q & A - Group Discussion Hands On Demo Safety Topic(s) Covered: Hazard Recognition & Identification 1. Name ( p r I n t ) Signature Employee # or Last 4 digits of SS #
Risk management a practical approach
Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries
Chapter 2: Forms of Energy
Chapter 2: Forms of Energy Goals of Period 2 Section 2.1: To describe the forms of energy Section 2.2: To illustrate conversions from one form of energy to another Section 2.3 To describe energy storage
PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION
DRAFT SAMPLE WRITTEN PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION For Compliance With 1910.132 Wyoming General Rules and Regulations Wyoming Department
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
Hazard/Risk Identification and Control Procedure
Hazard/Risk Identification and Control Procedure Introduction Hazard identification and the steps taken to minimize the risks associated with identified hazards are a critical component of working safely.
WEEKLY SAFETY MEETING All Euramax Subsidiaries LOCKOUT / TAGOUT. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
Hazard Management Tool
Hazard Management Tool Developed by the Workplace Safety and Insurance Board in collaboration with the Health and Safety Ontario members: Infrastructure Health and Safety Association Public Services Health
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
Basic Information / Risk Assessment General Part I II. http://hwi.osha.europa.eu
Risk Assessment Tool Basic Information / Risk Assessment General Part I II http://hwi.osha.europa.eu 2 R I S K A S S E S S M E N T T O O L I B A S I C I N F O R M A T I O N & R I S K A S S E S S M E N
Preview of Period 2: Forms of Energy
Preview of Period 2: Forms of Energy 2.1 Forms of Energy How are forms of energy defined? 2.2 Energy Conversions What happens when energy is converted from one form into another form? 2.3 Efficiency of
Compressed Gas Cylinder Program
Department of Environmental Health & Safety Procedures Compressed Gas Cylinder Program March 2010 Compressed Gas Cylinder Program Page 1 of 8 Table of Contents I. Introduction II. III. IV. Policy Scope
IOSH Working Safely MODULE 2: DEFINING HAZARD AND RISK. (Material correct Autumn 2013)
IOSH Working Safely MODULE 2: DEFINING HAZARD AND RISK Sample material (Material correct Autumn 2013) RRC 27-37 St George s Road London SW19 4DS United Kingdom T +44 (0)20 8944 3100 F +44 (0)20 8944 7099
HealthandSafetyOntario.ca. What is a work permit? Why use a work permit? Types of work permits. When is a work permit needed?
work permits What is a work permit? A work permit is a written form used to authorize jobs that expose workers to serious hazards. It identifies the work to be done, the hazards involved, and the necessary
Work Permits. A Health and Safety Guideline for Your Workplace. When is a Work Permit Needed? What is a Work Permit? Why use a Work Permit?
A Health and Safety Guideline for Your Workplace What is a Work Permit? A work permit is a written form used to authorize jobs that expose workers to serious hazards. It identifies the work to be done,
Getting the occupational safety basics organised
Getting the occupational safety basics organised 10 important measures Introduction Occupational health and safety are the foundation of wellbeing at work. The employer is responsible for providing safe
Introduction to Industrial Hygiene for the Safety Professional
Introduction to Industrial Hygiene for the Safety Professional Jeffery K. Dennis, MS, CSP, CHMM, CET, CSSM, WSO-CSE Welcome Today we will introduce and discuss the elements of effective Industrial Hygiene
University of Wisconsin-Stout. Occupational Safety & Health Plan. Overview
University of Wisconsin-Stout Occupational Safety & Health Plan Overview Wisconsin Statutes 101.055 and Wisconsin Administrative Code (Comm 32.11) require all public employers to develop and implement
Hazard Management Tool
Developed by the Health and Safety Ontario members: Infrastructure Health and Safety Association Public Services Health & Safety Association Workplace Safety North Workplace Safety & Prevention Services
Workplace Injury & Illness Prevention Program
Workplace Injury & Illness Prevention Program ID Analytics Inc. For non-high hazard employers RESPONSIBILITY The Injury and Illness Prevention (IIP) Program administrator is Janet Wickens, Director Human
HAZARD & RISK MANAGEMENT PROCEDURE
Introduction ATTAR is committed to providing a safe and healthy work environment for all employees. ATTAR also recognises its legal and moral obligation to provide and uphold so far as is practicable,
HealthandSafetyOntario.ca. Introduction. Responsibilities. Health and Safety Policy
starting your Health and safety program Introduction Workplace injuries and illnesses can be prevented. The key to achieving safe production is to identify and control all workplace health and safety hazards.
A Short Guide to The Safety, Health and Welfare at Work Act, 2005
A Short Guide to The Safety, Health and Welfare at Work Act, 2005 3 A Short Guide to the Safety, Health and Welfare at Work Act, 2005 Published in August 2005 by the Health and Safety Authority, 10 Hogan
Page85. Lock-out Tag-out Plan
Page85 Lock-out Tag-out Plan Page86 Lock-out / Tag-Out Plan Table of Contents 1. Policy 2. Purpose 3. Scope 4. General Procedures 5. Application of Control Procedure 6. Release from Control Procedure 7.
identify hazards, analyze or evaluate the risk associated with that hazard, and determine appropriate ways to eliminate or control the hazard.
What is a risk assessment? Risk assessment is the process where you: identify hazards, analyze or evaluate the risk associated with that hazard, and determine appropriate ways to eliminate or control the
Chapter 2: Forms of Energy
Chapter 2: Forms of Energy Goals of Period 2 Section 2.1: To describe the forms of energy Section 2.2: To illustrate conversions from one form of energy to another Section 2.3: To define the efficiency
Contractor Safety Program Office of Environmental Health and Safety University of Toronto
Office of Environmental Health and Safety Table of Contents Overview... 3 Program Objectives... 3 University Health and Safety Policy... 4 Environmental, Health and Safety Mission Statement... 4 Roles
Elements of an Effective Health and Safety Program. Health and Safety Program Management Guidelines
Elements of an Effective Health and Safety Program Health and Safety Program Management Guidelines Effective Health and Safety Programs It has been found that effective management of worker health and
tips How smallchangescan saveyou big, &
warehousesafety tips How smallchangescan saveyou big preventaccidentsreduceinjuries, & increaseproductivity.. Table of Contents Welcome Statement...4 Safety Policy Statement...5 Guiding Principles...6
Jonathan Wilson. Sector Manager (Health & Safety)
Jonathan Wilson Sector Manager (Health & Safety) OHSAS 18001:2007 Making Life Easier For Health & Safety Managers Workshop Agenda 1. Introduction 2. Why Manage Health & Safety 3. OHSAS 18001 and OHSMS
AZ State Standards. Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred.
Forms of Energy AZ State Standards Concept 3: Conservation of Energy and Increase in Disorder Understand ways that energy is conserved, stored, and transferred. PO 1. Describe the following ways in which
Young Workers Health & Safety Workshop
Young Workers Health & Safety Workshop Our goal is to give you the health and safety awareness you need to protect yourself and your fellow workers. SUMMER JOBS SERVICE Why? Because an average of 36 young
Safety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department
Safety at Kaiser Permanente Los Angeles Medical Center Environmental Health & Safety Department Environmental Health and Safety (EHS) The Los Angeles Medical Center (LAMC) is committed to providing a safe
What is Energy? What is the relationship between energy and work?
What is Energy? What is the relationship between energy and work? Compare kinetic and potential energy What are the different types of energy? What is energy? Energy is the ability to do work. Great, but
J. J. KELLER S 5-MINUTE WORKPLACE SAFETY TALKS
Acrylonitrile Air Contaminants How Much Is Too Much? Air Contaminants Standard Alcohol- and Drug-Free Workplace Anhydrous Ammonia Refrigeration Units Asbestos Automated External Defibrillators (AEDs) Behavior-Based
Elements of an Effective Safety and Health Program
Elements of an Effective Safety and Health Program Voluntary Safety and Health Program Management Guidelines Wholesale and Retail Trade Sector Healthy Workplaces 1 Effective Safety and Health Programs
Energy and Energy Transformations Test Review
Energy and Energy Transformations Test Review Completion: 1. Mass 13. Kinetic 2. Four 14. thermal 3. Kinetic 15. Thermal energy (heat) 4. Electromagnetic/Radiant 16. Thermal energy (heat) 5. Thermal 17.
Rutherford County Workplace Injuries and Safety
Rutherford County Workplace Injuries and Safety In safety, we concern ourselves not just with the tasks but how we accomplish the task. Objectives Course Outline: Become familiar with workplace injuries
Division of Public Health Administrative Manual
PURPOSE To establish a protocol for the development of a written Division of Public Health Hazard Communications Program at each applicable office or laboratory workplace and to assure that employees are
CSUCI Injury and Illness Prevention Program
1.0 References Title 8, California Code of Regulations, 3203 (8 CCR 3203) 2.0 Administering Agency State of California, Division of Occupational Safety & Health (Cal-OSHA) 3.0 Statement It is the intent
Introduction to Forms of Energy
FORMS OF ENERGY LESSON PLAN 2.1 Introduction to Forms of Energy This lesson is designed for 3rd 5th grade students in a variety of school settings (public, private, STEM schools, and home schools) in the
OSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
Alaska. Occupational Safety and Health Standards. quick guide to. hazard communication for general industry. What you should know and not a word more!
Alaska Occupational Safety and Health Standards quick guide to hazard communication for general industry What you should know and not a word more! Table of Contents Overview of AKOSH Services 1 What is
Working for business. Workplace Safety Discount Application With employees
Working for business Workplace Safety Discount Application With employees What is the Workplace Safety Discount? Workplace Safety Discount provides a framework for building successful and sustainable workplace
INJURY AND ILLNESS PREVENTION PROGRAM. For SOLANO COMMUNITY COLLEGE DISTRICT
INJURY AND ILLNESS PREVENTION PROGRAM For SOLANO COMMUNITY COLLEGE DISTRICT Adopted: August 1992 Updated: January 2004 Updated: January 2006 Updated: January 2009 TABLE OF CONTENTS INTRODUCTION... 1 GOALS...
Grade Level Expectations for the Sunshine State Standards
for the Sunshine State Standards FLORIDA DEPARTMENT OF EDUCATION http://www.myfloridaeducation.com/ The seventh grade student: The Nature of Matter uses a variety of measurements to describe the physical
INTRODUCTION TO OSHA PRESENTATION
Introduction to OSHA 2-hour Lesson Directorate of Training and Education OSHA Training Institute Lesson Overview Purpose: To provide workers with introductory information about OSHA Topics: 1. Why is OSHA
Policy: Accident & Injury Reporting Category: Operations. Authorized by: Joan Arruda, CEO
Category: Operations Authorized by: Pages: 11 Date effective: Dec. 15, 2010 To be revised: Dec. 15, 2013 Revised: May 9, 2011 Joan Arruda, CEO POLICY This Policy and Procedure is intended to bring consistency
Hazard Identification, Risk Assessment & Control Program
Hazard Identification, Risk Assessment & Control Program 1. INTRODUCTION Hazard Identification, Risk Assessment and Control The Nova Scotia Occupational Health and Safety Act, Capital Health Policies and
Occupational Health & Safety Practitioner. Reading PRINCIPLES OF ACCIDENT PREVENTION
Occupational Health & Safety Practitioner Reading PRINCIPLES OF ACCIDENT PREVENTION January 2009 Contents OVERVIEW...1 SECTION 1: INTRODUCTION...1 SECTION 2: TECHNIQUES FOR ACCIDENT PREVENTION...4 SECTION
Six steps to Occupational Health and Safety
Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the "duty of care" principle outlined in the
Hazard Identification, Risk Assessment And Control Procedure
Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards
WHS Induction Series. 36 Toolbox Talks. Contents
36 Toolbox Talks 3-5 minute toolbox talks for induction or refresher safety training. Having regular training programs that educate your workers about workplace issues has never been easier than now with
June 2010 HEALTH, SAFETY, AND ENVIRONMENT MANAGEMENT SYSTEM (HSEMS)
June 2010 HEALTH, SAFETY, AND ENVIRONMENT MANAGEMENT SYSTEM (HSEMS) TABLE OF CONTENTS PAGE PART I INTRODUCTION Corporate Health, Safety and Environment Policy.. 1 Purpose... 2 HSEMS Framework... 3 PART
Energy What is Energy? Energy is the ability to do work. Any object that has energy has the ability to create force. Energy is one of the fundamental building blocks of our universe. Energy appears in
WHS Policies and Procedures Package
WHS Policies and Procedures Package The following is an extract to highlight the style and layout of this publication, as well as a snapshot of the content. Some samples may not be included in their entirety
STORE HAZARDOUS SUBSTANCES SAFELY. incompatibles gas cylinders
STORE HAZARDOUS SUBSTANCES SAFELY Suitable containers incompatibles gas cylinders Oxy-Acetylene welding flammable substances 35 36 STORE HAZARDOUS SUBSTANCES SAFELY STORE HAZARDOUS SUBSTANCES SAFELY Storing
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Check/Service/Maintain/Repair/Install HVAC Equipment and Systems Job Title(s)
MD 52 WASTE MANAGEMENT AUTHORITY CORPORATE HEALTH AND SAFETY PROGRAM
UNSAFE ACTS AND CONDITIONS All accidents are the result of an unsafe act, an unsafe condition or a combination of both. Unsafe acts account for approximately 80% of all incidents/accidents, while unsafe
Company Safety & Health Policy Statement
Company Safety & Health Policy Statement The Oregon Safe Employment Act of 1973 clearly states our common goal of safe and healthful working conditions. Safety and health of our employees continues to
Back Injury Prevention Program
Hiring Back Injury Prevention Program To be successful, a complete program for preventing back injuries begins with the hiring process. Employers who address the issue of back safety during the hiring
UCLA Policy 811: Environmental Health and Safety
UCLA Policy 811: Environmental Health and Safety Issuing Officer: Assistant Vice Chancellor, General Services Responsible Dept: Environment, Health & Safety Effective Date: September 5, 2007 Supersedes:
Health and Safety Worker Training
Health and Safety Worker Training Wellington Health Care Alliance June 2014 To be the Workplace of Choice Our Hospitals are committed to a safe, healthy and respectful workplace 2 Occupational Health and
Lone Working Guidance
Document control information Published document name: loneworking-gn.pdf Date issued: October 2013 Version: 8.0 Previous review dates: Next review date: Related documents: Governing policy: Guidance to
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING
HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief
ACCIDENT PREVENTION PLAN. A Sample Plan for Counties
ACCIDENT PREVENTION PLAN A Sample Plan for Counties TABLE OF CONTENTS MANAGEMENT COMPONENT... 1 Safety Policy Statement Safety Committee Members Authority and Accountability Statement RECORDKEEPING COMPONENT...
Accident, Injury & Illness Program Training
CITY OF PHILADELPHIA RISK MANAGEMENT DIVISION Safety Directive #A-8 Revision #1 Title: Accident, Injury & Illness Program Training Purpose Training is one of the most important elements of any safety &
How To Ensure Safety On A Caravan Site
EAST CAMBRIDGESHIRE DISTRICT COUNCIL A Site Operators Guide to Health and Safety Introduction The Health and Safety at Work Etc. Act 1974 places a duty on all persons having control of a caravan site to
Injury or accident report
Injury or accident report Fill out all fields. Be as specific as possible and include drawings, photos and additional narrative as needed. Facility/location: Incident type: Injury Incident Equipment/property
No. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974
The Police Treatment Centres Health and Safety Legal Compliance Register No. Name of Legislation Applicable Issues and Requirements Demonstration of Compliance 1. Health and Safety at Work Act 1974 2.
E3902 Seeing Accidents Before They Happen Leader s Guide
E3902 Seeing Accidents Before They Happen Leader s Guide ERI PRODUCTIONS INC. SEEING ACCIDENTS BEFORE THEY HAPPEN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
Safety? We have an APP for that!
Safety? We have an APP for that! Carltech s Accident Prevention Program Employee Safety Handbook Message from our President It is my pleasure to welcome you to the Carltech team! As one of our valued employees,
OCCUPATIONAL HEALTH AND SAFETY RISK ASSESSMENT PROGRAM FOR AGRICULTURE
OCCUPATIONAL HEALTH AND SAFETY RISK ASSESSMENT PROGRAM FOR AGRICULTURE Definitions of Commonly Used Terms in Risk Management Hazard: anything, including a work practice or procedure, that causes, or has
WORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
SAFETY TRAINING CLASSES & SERVICES LIST
SAFETY TRAINING CLASSES & SERVICES LIST CUSTOM CLASS ROOM TRAINING AVAILABLE, BACKED WITH ON-SITE SUPPORT SAFETY, TRAINING COURSES OFFERED BY OUR CERTIFIED ELITE RISK CONTROL TEAM: EM 385-1-1 (Military)
LASER SAFETY MANUAL UNIVERSITY OF KENTUCKY POLICIES AND PROCEDURES FOR LASER USERS REVISED EDITION 2012 ISSUED BY
LASER SAFETY MANUAL UNIVERSITY OF KENTUCKY POLICIES AND PROCEDURES FOR LASER USERS REVISED EDITION 2012 ISSUED BY UNIVERSITY OF KENTUCKY RADIATION SAFETY OFFICE TABLE OF CONTENTS POLICY AND PURPOSE 2 LASER
A. a security guard B. a competent scaffold erector C. your boss D. the ship repair manager
01 If a worker is injured at work, he should. A. make sure it does not affect his work B. continue working until he is not able to C. go home to rest immediately without informing his employer or supervisor
Occupational Health & Safety Policy Box Hill Institute Group
Purpose Occupational Health & Safety Policy Box Hill Institute Group To ensure that Occupational Health and Safety (OHS) is incorporated into all workplace and learning activities so that the prevention
Sample Risk Management Policy and Procedure
Sample Risk Management Policy and Procedure 1. Purpose and Scope This policy establishes the process for the management of risks faced by [organisation]. The aim of risk management is to maximise opportunities
In science, energy is the ability to do work. Work is done when a force causes an
What is energy? In science, energy is the ability to do work. Work is done when a force causes an object to move in the direction of the force. Energy is expressed in units of joules (J). A joule is calculated
WEEKLY SAFETY MEETING All Euramax Subsidiaries ACCIDENT REPORTING. Safety Meeting Contents. Meeting Notice. Leaders Guide.
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH
FACILITY SAFETY SIGNAGE GUIDE: 10 SIGNS TO SPOT DURING A PLANT WALKTHROUGH Safety signs are the primary way to communicate important warnings and messages to your employees, on-site contractors and other
Risk Assessment. Module 1. Health & Safety. Essentials. 16-23 November 2013. Registered charity number 207890
Risk Assessment Module 1 Risk assessment in the laboratory After studying this module you will be able to understand the need to conduct risk assessments, how this applies to all laboratory activities,
1. Organization and Management of UNR Safety Programs
WRITTEN WORKPLACE SAFETY PLAN University of Nevada, Reno 1. Organization and Management of UNR Safety Programs Administrative Responsibilities Final responsibility for maintenance of campus safety and
Loughborough University
Loughborough University Health & Safety Service Health & Safety Course Guide 2015-2016 www.lboro.ac.uk/health-safety Loughborough University Contents Welcome 01 Bespoke Training 01 Accredited Courses IOSH
ISHMS Post Test Answer Key
ISHMS Post Test Answer Key Multiple Choice: For each of the following questions, circle the letter that best answers the question. 1. What is a Safety and Health Management System? A. [A set of interrelated
Conducting a Job Hazard Assessment. Environmental, Health and Safety 275-3241
Conducting a Job Hazard Assessment Environmental, Health and Safety 275-3241 EH&S Programs: Fire Safety Blood Borne Pathogens Hazard Communication Personal Protective Equipment Emergency Preparedness General
Life Saving Rules SAFETY BY CHOICE, NOT BY CHANCE
Life Saving Rules SAFETY BY CHOICE, NOT BY CHANCE Foreword from Kevin Reinhart The 12 Life Saving Rules are a part of Nexen s continued commitment to create a safe work environment for our employees. The
Oneida County JOB DESCRIPTION
Oneida County JOB DESCRIPTION JOB TITLE: Public Health Nurse DEPARTMENT: Health Reports To: Public Health Director and Assistant Director FLSA Status: Nonexempt Prepared By: Linda Conlon Prepared Date:
Access to Employee Exposure and Medical Records
Purpose Access to Employee Exposure and Medical Records The purpose of this section is to provide employees and their designated representatives a right of access to relevant exposure and medical records
THE FOUNDATION OF A SAFE WORKPLACE
THE FOUNDATION OF A SAFE WORKPLACE 1 About this guide The foundation of a safe workplace is an Oregon OSHA Standards and Technical Resources publication. Layout, design, and editing: Layout and design:
Oregon State Library Policy
Oregon State Library Policy Workplace Safety Approved by: Date: 8/9/11 Policy Statement: It is the policy of the Oregon State Library to maintain the productivity, well-being and safety of the agency by
HAZARDOUS MATERIALS MANAGEMENT ISSUE 2
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASON FOR INCLUSION 2 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 3 7 SYSTEM AND PROCEDURAL REQUIREMENTS 5 8 PEOPLE REQUIREMENTS 7 APPENDIX
ACCIDENT/INCIDENT REPORTING AND RECORDING
ACCIDENT/INCIDENT REPORTING AND RECORDING Workplace Health and Safety Queensland (WHSQ) need to be notified if a person suffers a serious bodily injury (SBI) or a work-related illness or if a dangerous
Section 15.1 Energy and Its Forms (pages 446 452)
Section 15.1 and Its Forms (pages 446 452) This section describes how energy and work are related. It defines kinetic energy and potential energy, and gives examples for calculating these forms of energy.
RTC - HB004202 SAFETY & SECURITY FEATURES
SAFETY & SECURITY FEATURES 1. GUEST ROOM PROVISIONS External locks Secondary locking device for entry and connecting doors Entry door viewer Self-closing entry door In room safes or central safety deposit
Incident Investigations Handbook
Incident Investigations Handbook The following agencies may respond to an incident (insert phone numbers of your location) Police Fire/rescue Ambulance Coroner WorkSafeBC BC Safety Authority ICBC BC Hydro
Safe Operating Procedure
Safe Operating Procedure (Revised 11/11) JOB SAFETY ASSESSMENTS (For assistance, please contact EHS at (402) 472-4925, or visit our web site at http://ehs.unl.edu.) This SOP is intended for supervisors
MACHINERY GUARDING. Your Practical Guide
MACHINERY GUARDING Your Practical Guide WELCOME TO AXA Introducing AXA One of the world s largest insurers With more than 50 million customers across the globe, AXA is one of the world s largest financial
Science Tutorial TEK 6.9C: Energy Forms & Conversions
Name: Teacher: Pd. Date: Science Tutorial TEK 6.9C: Energy Forms & Conversions TEK 6.9C: Demonstrate energy transformations such as energy in a flashlight battery changes from chemical energy to electrical
Risk Management & Assessment at UQ
Risk Management & Assessment at UQ Course Overview: This training module has been developed for workers at the University of Queensland, and forms part of the OH&S training program at UQ. The aim of this