Netting Product Technical Specification Sheet
|
|
|
- Myron Dennis
- 7 years ago
- Views:
Transcription
1 Model No: Type: 1/8 Debris Liner Windscreen Typical Uses: Debris Liner for Personnel Safety Nets, Vertical Debris Wrap Material Construction: 3-Way Lockstitch Knit 50% Shade Mesh Size: Approx. 1/16 X 1/8 ( Rectangular Shape ) Mesh Twine: High Density Monofilament Virgin Resin Polyethylene Thread Mesh Color: Black Mesh Weight: #120 Nylon Twine.170 Diameter 1200 Lb. Tensile Breaking Strength 1000 Denier Polyester 3-Needle Machine Wrap Approximately 4.79 oz./square yard Mesh Strength : Bursting Strength: 180 Psi Breaking Strength: Warp Direction : 59 Lbs. Fill Direction : 135 Lbs. Elongation: Warp Direction : 50% Fill Direction : 50% Tearing Strength: Warp Direction : 27 Lbs. Fill Direction : 52 Lbs. Prototype Testing: Static Load Test: N/A Dynamic Drop Test: 350 Ft.-lbs. Flame Resistance: Material meets the requirements of: CPAI-84 Section 6 for flammability Puncture Resistance: 38 LBS.
2 Model No: 120 Type: Safety Netting Typical Uses: Debris liners for Personnel Netting, Batting Cages, Golf Cages, Conveyor Guarding. Construction: Raschel Knotless Mesh Size: 3/4 ( 1-1/2 Stretched ) Mesh Twine: RN-117 (120/40) 100% Nylon-D with 89 lb. breaking strength #120 Nylon Twine Size:.170 Dia Lb. Tensile Breaking Strength 1000 Denier Polyester 3-Needle Merrow Machine Wrap Joining Twine: #18 Nylon Mesh Weight: Approx to.0272 lbs. per Sq. Ft. Prototype Testing: Dynamic Drop Test: 300 Ft.-lbs. Static Load Test: 1,900 lbs. (Ultimate Strength) Latex: A treatment of the netting in a mixture of latex and water for
3 Model No: 240 Type: Safety Netting Typical Uses: Pallet Rack Guarding, Commercial Grade Batting Cage & Hockey Net Applications. Construction: Knotted, Sewn Border Mesh Size: 1 3/4 ( 3 3/4 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #36 (.085 Dia. ) Type: 3-strand Twist 320 Lb. Tensile Breaking Strength Hanging Twine: Nylon Polyamide Fiber Size: 1/4 Dia. Type: 3-strand Twist, Soft Lay 1500 Lb. Tensile Breaking Strength BZT 346 TR-350HS Bonded Nylon (Used when sewn border method of fabrication is specified) Polyester Fiber Size: Single #42 (.087 Dia. ) Type: Braided 420 Lb. Tensile Breaking Strength (Used when hung border method of fabrication is specified) Joining Twine: Same As Mesh Twine Mesh Weight: Approx Lbs. Per Sq. Ft. ( Untreated ) Prototype Testing: Dynamic Drop Test: 2,500 Ft.-lbs. ( DBI-SALA Test #TR-212, ) Latex: A treatment of the netting in a mixture of latex and water for
4 Model No: 385 Type: Safety Netting Typical Uses: Conveyor Guarding, Rack Guarding, Spalling Applications, Under Cargo-Climb Netting, Heavy Duty Baseball Netting Construction: Knotted, Sewn Border Mesh Size: 2 ( 4 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #84 (.135 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 800 Lb. Tensile Breaking Strength Nylon Polyamide Fiber Size: 3/8 Dia. Type: 3-strand Twist, Soft Lay 3650 Lb. Tensile Breaking Strength BZT346 TR-350HS Bonded Nylon Joining Twine: Same As Mesh Twine Mesh Weight: Approx..078 Lbs. Per Sq. Ft. ( Untreated ) Prototype Testing: Dynamic Drop Test: 8,000 Ft.-lbs. ( DBI-SALA Test #TR ) Latex: A treatment of the netting in a mixture of latex and water for Please Note : When used in Spalling applications, this model should be fabricated in diamond mesh.
5 Model No: 375 Type: Safety Netting Typical Uses: Conveyor Guarding / Rack Guarding, Spalling Applications, Water and Amusement Parks, Under Cargo-Climb Netting Construction: Knotted, Sewn Border Mesh Size: 2 1/2 ( 5 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #84 (.135 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 800 Lb. Tensile Breaking Strength Hanging Twine: Nylon Polyamide Fiber Size: 3/8 Dia. Type: 3-strand Twist, Soft Lay 3650 Lb. Tensile Breaking Strength Polyester Fiber Size: Single # Dia. Type: Braided 420 Lb. Tensile Breaking Strength Joining Twine: Same As Mesh Twine Mesh Weight: Approx..053 Lbs. Per Sq. Ft. ( Untreated ) Prototype Testing: Dynamic Drop Test: 6,000 Ft.-lbs. ( DBI-SALA Test #TR-167 ) Latex: A treatment of the netting in a mixture of latex and water for Please Note : When used in Spalling applications, this model should be fabricated in diamond mesh.
6 Model No: 480 Type: Safety Netting Typical Uses: Conveyor Guarding, Rack Guarding Construction: Knotted, Sewn Border Mesh Size: 4 ( 8 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #84 (.135 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 800 Lb. Tensile Breaking Strength Nylon Polyamide Fiber Size: 3/8 Dia. Type: 3-strand Twist, Soft Lay 3650 Lb. Tensile Breaking Strength BZT 346 TR-350HS Bonded Nylon Joining Twine: Same As Mesh Twine Mesh Weight: Approx..035 Lbs. Per Sq. Ft. ( Untreated ) Prototype Testing: Dynamic Drop Test: 8,000 Ft.-lbs. ( Ultimate Strength ) DBI-SALA Test #TR-181. Rated at 4,000 Ftlbs. Latex: A treatment of the netting in a mixture of latex and water for
7 Model No: 686 Type: Safety Netting Typical Uses: Conveyor Guarding, Rack Guarding Construction: Knotted, Sewn Border Mesh Size: 6 ( 12 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #84 (.135 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 800 Lb. Tensile Breaking Strength Nylon Polyamide Fiber Size: 3/8 Dia. Type: 3-strand Twist, Soft Lay 3650 Lb. Tensile Breaking Strength BZT 346 TR-350HS Bonded Nylon Joining Twine: Same As Mesh Twine Mesh Weight: Approx Lbs. Per Sq. Ft. ( Untreated ) Prototype Testing: Static Load Test: 4,500 Lbs. ( ultimate strength ) Dynamic Drop Test: 1,500 Ft.-lbs. ( ultimate strength ) DBI-SALA Test # TR-166 Latex: A treatment of the netting in a mixture of latex and water for
8 Model No: Type: 1225D Personnel - Heavy Duty Typical Uses: To protect an area left undecked during construction within the perimeter of a building as perimeter netting around the outside of a building under construction or undergoing renovation in any open shafts such as: elevator shafts, services chases, andaround tower cranes in addition to use on buildings, personnel nets should be considered as a means of fall protection on other types of construction including: bridges, towers, drilling rigs, power & chemical plants, oil refineries, silos, dams, ships holds, etc. Construction: Knotted Diamond Mesh Size: 2 1/2 ( 5 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #120 (.170 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 1200 Lb. Tensile Breaking Strength Selvage Twine: Same as Mesh Twine Hanging Twine: Nylon Polyamide Fiber Size: 1/2 Dia. Type: 3-strand Twist, Soft Lay 6400 Lb. Tensile Breaking Strength Polyester Size: Single # 42 (.087 Dia. ) Type: Braided 420 Lb. Tensile Breaking Strength Joining Twine: Same As Mesh Twine Mesh Weight: Approx Lbs. Per Sq. Ft. ( Untreated ) Hooks: Type: Steel, Spring Style, With Ringed Eye Size: 7/16 Stock Dia. Rating: 500 Lb. Working Load Limit Finish: Zinc Plated Snap Opening: 5/8 Installation: Lashed to border rope with Single #42 nylon twine, spaced 2ft. O.C., & staggered with respect to adjacent panel (when applicable).
9 Model No: Type: 1225D Personnel - Heavy Duty Prototype Testing: Static Load Test: N/A Dynamic Drop Test: 25,000 Ft.-lbs. ( Min. Test Force ) Quality Control: DBI-SALA personnel nets incorporate test strands which may be removed & returned to the factory for breaking strength tests at no charge. It is DBI-SALA policy to remove DBI-SALA rental nets from service when the breaking strength of test strands falls below 75% of the original strength. DBI-SALA recommends that the purchaser follow the same policy, but this is not to be considered a substitute for the on the job tests specified in the regulations. DBI-SALA makes no claims nor draws any correlation between test strand strength versus on the job results. Eight test strands are attached, two in each corner of the net. If desired, remove one and return to DBI-SALA for test. Do not cut the cords which actually form the net. Include the net serial number and the net size with the returned test strands. DBI-SALA personnel nets are permanently labeled with the following: Name Of Manufacturer ( DBI-SALA ) Serial Number Identification Of Net Material Date Of Manufacture Date Of Prototype Test Name Of Testing Agency DBI-SALA personnel nets are certified to meet the requirements of ANSI-A10.11, The U.S.Army Corps. of Engineers, and all applicable OSHA rules and regulations. Latex: A treatment of the netting in a mixture of latex and water for
10 Model No: 1200S Type: Heavy Duty Safety Typical Uses: To protect an area left un-decked during construction within the perimeter of a building, perimeter netting around the outside of a building during construction, spalling masonry, or undergoing renovation in any open shafts such as elevator shafts, services chases, and around tower cranes. Also as safety nets (non-personnel), as a means of protection on other types of construction including bridges, towers, drilling rigs, power and chemical plants, oil refineries, silos, dams, ship s holds, etc. where fall distance is not an issue. As horizontal safety netting in auto/truck garage service pit applications, helipads, and orchestra pits. Construction: Knotted, Hung Border Mesh Size: 3 1/2 ( 7 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #120 (.170 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 1200 Lb. Tensile Breaking Strength Hanging Twine: Nylon Polyamide Fiber Size: 1/2 Dia. Type: 3-strand Twist, Soft Lay 6400 Lb. Tensile Breaking Strength Polyester Fiber Size: Single #42 (.087 Dia. ) Type: Braided 420 lb. Tensile Breaking Strength Joining Twine: Same As Mesh Twine Mesh Weight: Approx..08 Lbs. Per Sq. Ft. ( Untreated ) Hooks (when used): Type: Steel, Spring Style Size: 7/16 Stock Dia. Rating: 900 Lb. Working Load Limit Finish: Zinc Plated Snap Opening: 5/8 Installation: Lashed to border rope with single #42 polyester twine, spaced 2 ft. or 4ft. O.C. when applicable Prototype Testing: Dynamic Drop Test: 8,500 Ft.-lbs. DBI-SALA Test # TR-196 Latex: A treatment of the netting in a mixture of latex and water for
11 Model No: Type: PERSONNEL Personnel Typical Uses: This is DBI-SALA s standard personnel net. It is typically used to protect an area left undecked during construction within the perimeter of a building, as perimeter netting around the outside of a building under construction, or undergoing renovation in any open shafts such as: elevator shafts, services chases, and around tower cranes. In addition to use on buildings, personnel nets should be considered as a means of fall protection on other types of construction including: bridges, towers, drilling rigs, power & chemical plants, oil refineries, silos, dams, ships holds, etc. Also available as an adjustable personnel net system. Construction: Knotted, Hung Border Diamond Mesh Size: 3 1/2 ( 7 Stretched ) Mesh Twine: Nylon Polyamide Fiber Size: Single #120 (.170 Dia. ) Type: 3-strand Twist #728 High Tenacity Nylon 1200 Lb. Tensile Breaking Strength Hanging Twine: Nylon Polyamide Fiber Size: 1/2 Dia. Type: 3-strand Twist, Soft Lay 6400 Lb. Tensile Breaking Strength Polyester Fiber Size: Single # 42 (.087 Dia. ) Type: Braided 420 Lb. Tensile Breaking Strength Joining Twine: Same As Mesh Twine Mesh Weight: Approx..08 Lbs. Per Sq. Ft. ( Untreated ) Hooks: Type: Steel, Spring Style Size: 7/16 Stock Dia. Rating: 900 Lb. Working Load Limit Finish: Zinc Plated Snap Opening: 5/8 Installation: Lashed to border rope with Single #42 polyester twine, spaced 4ft. O.C., & staggered with respect to adjacent panel (when applicable).
12 Model No: Type: PERSONNEL Personnel Prototype Testing: Static Load Test: N/A Dynamic Drop Test: 17,500 Ft.-lbs. ( Min. Test Force ) 20,000 Ft.-lbs. ( Ultimate Strength ) DBI-SALA Test # TR-175 Quality Control: DBI-SALA personnel nets incorporate test strands which may be removed & returned to the factory for breaking strength tests at no charge. It is DBI-SALA policy to remove DBI-SALA rental nets from service when the breaking strength of test strands falls below 75% of the original strength. DBI-SALA recommends that the purchaser follow the same policy, but this is not to be considered a substitute for the on the job tests specified in the regulations. DBI-SALA makes no claims nor draws any correlation between test strand strength versus on the job results. Eight test strands are attached, two in each corner of the net. If desired, remove one and return to DBI-SALA for test. Do not cut the cords which actually form the net. Include the net serial number and the net size with the returned test strands. DBI-SALA personnel nets are pemanently labeled with the following: Name Of Manufacturer ( DBI-SALA ) Serial Number Identification Of Net Material Date Of Manufacture Date Of Prototype Test Name Of Testing Agency DBI-SALA personnel nets are certified to meet the requirements of ANSI-A10.11, The U.S.Army Corps. of Engineers, and all applicable OSHA rules and regulations. Latex: A treatment of the netting in a mixture of latex and water for
13 Model No: 130 Type: Safety Netting Typical Uses: Rack Guarding, Conveyor Guarding, Amusement Netting, Driving Range Nets Construction: Raschel Knotless, Sewn Border Mesh Size: 1 ( 2 Stretched ) Mesh Twine: RN-1755 (210/80) 100% Nylon-D 190 lb. Breaking Strength #120 Nylon Twine Size:.170 Dia Lb. Tensile Breaking Strength 1000 Denier Polyester 3-Needle Merrow Machine Wrap Joining Twine: #21 Nylon Mesh Weight: Approx to.0442 Lbs. Per Sq. Ft. Prototype Testing: Static Load Test: Dynamic Drop Test: 1,000 Ft.-lbs (DBI-SALA Test #TR-162) Latex: A treatment of the netting in a mixture of latex and water for
14 Model No: 145 Type: Safety Netting Typical Uses: Conveyor Guarding, Light-Duty Batting Cages, Soft Play Barrier Nets Construction: Raschel Knotless, Sewn Borders Mesh Size: 1 3/4 ( 4 Stretched ) Mesh Twine: RN-1155 (120/80) 100% Nylon-D 190 lb. Breaking Strength #120 Nylon Twine Size:.170 Dia Lb. Tensile Breaking Strength 1000 Denier Polyester 3-Needle Merrow Machine Wrap Joining Twine: #21 Nylon Mesh Weight: Approx to.0250 Lbs. Per Sq. Ft. Prototype Testing: Static Load Test: 1,500 lbs Dynamic Drop Test: 750 Ft.-lbs Latex: A treatment of the netting in a mixture of latex and water for
15 Model No: 245 Type: Safety Netting Typical Uses: Rack Guarding, Conveyor Guarding, Cage Netting, Soft Play Barrier Nets Construction: Raschel Knotless, Sewn Border Mesh Size: 2 ( 4 Stretched ) Mesh Twine: RN-1201 (210/120) 100% Nylon-D 330 lb. Breaking Strength #120 Nylon Twine Size:.170 Dia Lb. Tensile Breaking Strength 1000 Denier Polyester 3-Needle Merrow Machine Wrap Joining Twine: #48 Nylon Mesh Weight: Approx Per Sq. Ft. Prototype Testing: Static Load Test: Dynamic Drop Test: 2,500 Ft.-lbs (DBI-SALA Test #TR-163) Latex: A treatment of the netting in a mixture of latex and water for
16 Model No: Type: Liner 1/4 Debris Liner Typical Uses: As a liner to personnel and lightweight, and debris containment netting. Construction: 24 Gauge Raschel (12 needles/inch) Elongated Honeycomb Hexagon (32 spi) Mesh Opening: Approx. 1/4 Mesh Yarn: 85% 1000 Denier Dacron Polyester 15% 150 Denier Dacron Polyester Border Twine: Breaking Strength: Mesh Weight: #120 Nylon Twine Size:.170 Dia Lb. Tensile Breaking Strength 1000 Denier Polyester 3-needle Merrow machine wrap 108 psi (warp direction) 82 psi (fill direction) 120 psi (Ball Burst Mullen Test ASTM 5120) Approx. 4.8 oz Per Sq. Yd. Prototype Testing: Static Load Test: 2450 lbs. Dynamic Drop Test: 1500 Ft.-lbs. Mfg. Process: After knitting, the fabric is washed thoroughly, then dyed black in a jet dyeing machine at 260º F, Camester black dye B.L.E. after dyeing, Camefix NP ( to improve UV resistance ) and flame retardant chemicals are added before drying & heat setting the fabric is then dried & heat set on an enclosed tenter frame at 380º F in 120 width. Flame Test: NFPA 701 Large Scale : Char Length (Warp) 4.7 ( Fill ) 5.3 After Flame ( Warp ) 0 ( Fill ) 0 Note: This Fabric Passes NFPA-701 Large Scale Flame Test
17 Model No: Pallet Sox - Open Top Type: Reusable Pallet Load Containment System Typical Uses: As a pallet cover used to reduce risk of falling product from elevated storage by containing the load on the pallet Construction: Lockstitch Knit Shadow Value: 50% shade Mesh Size: Approx. 1/8 X 1/4 - Triangular Zig-Zag Mesh: Knitted High Density Monofilament Polyethylene thread Mesh Melting Point: Mesh Flammability Point: Mesh Color: Mesh Weight: 133ºC (271ºF) 364ºC (687ºF) Various Colors Available Approx..014 lbs. per Sq. Ft (70 grams Per Sq. Meter). Prototype Testing: Static Load Test: 250 lbs. (DBI-SALA Test #TR ) Dynamic Drop Test: 750 lbs. (DBI-SALA Test #TR ) Drawstrings: Quantity: Adjustment Clip: 3/8 Wide Polypropylene Webbing, factory knitted into mesh. 420 Lb. Pull-Test Ultimate Strength 5 per unit (typically) 1/2 cam buckle; one per drawstring
18 Model No: Pallet Sox - Closed Top Type: Reusable Pallet Load Containment System Typical Uses: As a pallet cover used to reduce risk of falling product from elevated storage by containing the load on the pallet Construction: Lockstitch Knit Shadow Value: 50% shade Mesh Size: Approx. 1/8 X 1/4 - Triangular Zig-Zag Mesh: Knitted High Density Monofilament Polyethylene thread Mesh Melting Point: Mesh Flammability Point: Mesh Color: Mesh Weight: 133ºC (271ºF) 364ºC (687ºF) Various Colors Available Approx..014 lbs. per Sq. Ft (70 grams Per Sq. Meter). Prototype Testing: Static Load Test: 250 lbs. (DBI-SALA Test #TR ) Dynamic Drop Test: 750 lbs. (DBI-SALA Test #TR ) Drawstrings: Quantity: Adjustment Clip: 3/8 Wide Polypropylene Webbing, factory knitted into mesh. 420 Lb. Pull-Test Ultimate Strength 5 per unit (typically) 1/2 cam buckle; one per drawstring
Choosing The Proper Short Cut Fiber for Your Nonwoven Web
Choosing The Proper Short Cut Fiber for Your Nonwoven Web ABSTRACT You have decided that your web needs a synthetic fiber. There are three important factors that have to be considered: generic type, diameter,
How To Work With Beads. By Rowan
R O W A N How To Work With Beads By Rowan HOW TO WORK WITH BEADS Adding beads to a knitted or crocheted design gives it a really special touch especially when the beads added are as stunning as those in
Table of Contents PRODUCTS. DYE SUB POP UP CANOPIES P. 3-4 Dye Sublimated Canopy... Attract Customers, Increase Brand Awareness & Say it in Color!
PRODUCTCATALOG Table of Contents PRODUCTS DYE SUB POP UP CANOPIES P. 3-4 Dye Sublimated Canopy... Attract Customers, Increase Brand Awareness & Say it in Color! TEARDROP BANNERS P. 9-10 Ideal for both
1-800-238-0333 2013 synthetics catalog right product right place right time
000 0 synthetics catalog right product right place right time Disclaimer & copyright The information contained in this catalog is derived from many sources, including numerous thirdparty manufacturers
A. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.
13310 FABRIC SHADE STRUCTURES FOR PLAYGROUND AREAS ************************************************************************************************************************ SPECIFIER: CSI Master Format
Flexible Spill Containment Protecting You And The Environment
Flexible Protecting You And The Environment Unit Liner Company C o nta i n m ent Syste m s C o nta i n m ent Syste m s Foam Foam Clean and store for repeated use Includes Clean and patch store kit for
Naylor Bag and Supply. Product Guide. Call For Quantity Discount! Free Shipping on Orders of 4 or More Pallets. www.naylorbag.com
Naylor Bag and Supply Product Guide Call For Quantity Discount! Free Shipping on Orders of 4 or More Pallets WHO WE ARE As a family-owned and operated company, Naylor Bag and Supply prides itself on superior
MaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
Dispersion of Synthetic Fibers in Wet-Lay Nonwovens
Dispersion of Synthetic Fibers in Wet-Lay Nonwovens This article was written by James M. Keith, retired Director of Technical Services for MiniFIBERS, and published in the Tappi Journal, Vol. 77, No. 6,
SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE)
SECTION 07560 FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE) PART 1 GENERAL 1.1 DESCRIPTION 1. Fluid applied flexible acrylic waterproofing system over concrete. This work shall include the
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
Bafl-Sorb Sound Absorbing Ceiling Baffles
Bafl-Sorb Sound Absorbing Ceiling Baffles INC offers a complete line of Sound Absorbing Ceiling Baffles to compliment any environment. Our ceiling baffles are among the most cost-effective method of adding
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
CUSTOMS TARIFF - SCHEDULE 56 - i
56 - i Chapter 56 WADDING, FELT AND NONWOVENS; SPECIAL YARNS; TWINE, CORDAGE, ROPES AND CABLES AND ARTICLES THEREOF Notes. 1. This Chapter does not cover: (a) Wadding, felt or nonwovens, impregnated, coated
Wire rope slings, the hazards surrounding
Recommended loads for wire rope slings Wire rope slings, the hazards surrounding their use, and safety measures or alternatives to avoid injury will be covered in this data sheet. 2. Wire rope made from
INC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications
INC Flexi-Sorb Noise Control Curtain System Versatile Flexible Easy To Install Durable Good Noise Reduction Economical Our Flexi-Sorb noise control curtain product line consists of flexible, durable acoustical
The Company. We take pride in our ability to serve our clients by providing the highest quality products with industry leading turnaround times.
1 The Company Digital Arts Imaging is an independently owned manufacturing, marketing and media company. Although the company began in 2001, our foundations were established well over thirty years ago.
Properties of Fibers and Fabrics Luke Ferguson, Ph.D. Materials Education Associates Seattle, WA lukef@q.com
Properties of Fibers and Fabrics Luke Ferguson, Ph.D. Materials Education Associates Seattle, WA lukef@q.com Copyright: Edmonds Community College 2009 Abstract This experiment tests the strength of threads,
TECHNICAL TEXTILE & FABRIC FOR DIGITAL PRINTING HANGZHOU (CHINA). HAINING(CHINA). UK
TECHNICAL TEXTILE & FABRIC FOR DIGITAL PRINTING Soyang is the leading supplier of technical textile & fabrics for digital printing and industrial application based in China. With more than 10years experiences
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS
SAFE HANDLING OF PRECAST CONCRETE PRODUCTS Safety Handling of Precast Concrete Products The lifting of any precast product requires the use of special equipment and substantial planning and knowledge.
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
User Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems
Instructions for the following series products: User Instruction Manual Vertical Lifelines and Vertical Lifeline Subsystems Vertical Lifelines Vertical Lifeline Subsystems (See back pages for specific
SPECIFICATION FOR NOISEMASTER SOUND CONTROL PRODUCTS. Noisemaster Sailcloth Baffles shall be manufactured by THE PROUDFOOT CO., INC., Monroe, CT.
SPECIFICATION FOR NOISEMASTER SOUND CONTROL PRODUCTS Sound Absorptive Baffle (Sailcloth Nylon) Noisemaster Sailcloth Baffles shall be manufactured by THE PROUDFOOT CO., INC., Monroe, CT. Noisemaster Baffles
LiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
WIRE TIES FOR OVERHEAD LIFTING
Phone: (720) 554-0900 Fax: (720) 554-0909 technical@galvanizeit.org WIRE TIES FOR OVERHEAD LIFTING 1. Scope 1.1 The wire tie guideline covers common practices and procedures in the galvanizing industry
Assembly Instructions MDM Products Party Tent
Assembly Instructions MDM Products Party Tent Congratulations! Congratulations on your purchase of a MDM Products Party Tent Shelter by MDM Products LLC. With proper installation, use, and maintenance,
40 years of quality & service. SINTEPLAST, S.A. de C.V. TARPAULIN
SINTEPLAST, S.A. de C.V. TARPAULIN Econoplast Tarpaulin 9 x 6 1000 D. Specially designed for outdoor uses. Its excellent physical and mechanical proprieties make it one of the most versatile materials.
800-457-2369 www.portabledisplaybooths.com
We look forward to working with you to design a Trade Show Exhibit Booth, Graphics & Promotional Items that will make your Trade Show experience a SUCCESS! Miriam & Makara 800-457-2369 www.portabledisplaybooths.com
SEWING MAINTENANCE CHECKLIST
SEWING MAINTENANCE CHECKLIST Many Retail, Brand-name Marketing, Mail Order and Sourcing Companies are visiting existing and potential Contractor sewing facilities and evaluating their sewing capabilities
FLAME RESISTANT (FR) NFPA 70E NESC OSHA 1910.269 ASTM F1506. CSA Z462 (Canada) Secondary Protection from Electric Flash fire hazards
FLAME RESISTANT (FR) CLOTHING featuring: NFPA 70E NESC OSHA 1910.269 ASTM F1506 CSA Z462 (Canada) Secondary Protection from Electric Flash fire hazards NFPA 2112 (Select Styles) NION MADE IN THE USA 31
Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
FLEXSTORM Inlet Filter Specifications and Work Instructions
FLEXSTORM Inlet Filter Specifications and Work Instructions Product: Manufacturer: FLEXSTORM Inlet Filters Inlet & Pipe Protection, Inc www.inletfilters.com A subsidiary of Advanced Drainage Systems (ADS)
Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf
Introduction There are two terrific reasons for melting glass through screens. First because screen melts produce uniquely intricate patterns not possible any other way and second because it does it using
Materials. Estimating Steel. Players. Materials. Shop Drawings. Detailing Process. Standard shapes. Fabricated members, Built-up sections
Materials Standard shapes W sections, C channels, Structural T, Angles, Pipes, Tubes, Rods and Plates Fabricated members, Built-up sections Adding plates to beam flanges, Stiffeners to beam webs Built
Figure 1-5000335. Figure 2 - Applications
User Instruction Manual 5000335 Rope Grab This manual is intended to meet the Manufacturer's Instructions as required by ANSI Z359.1, and should be used as part of an employee training program as required
Haviland Drainage Products Co. Box 97 Haviland, Ohio 45851 Ph. (419) 622-4611 Fax (419) 622-6911 www.haviland-drainage.com
Haviland Drainage Products Co. Box 97 Haviland, Ohio 45851 Ph. (419) 622-4611 Fax (419) 622-6911 www.haviland-drainage.com Solutions in Drainage MISSION STATEMENT For more than five decades, Haviland Drainage
LIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D.
LIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D. INTRODUCTION The purpose of the American Galvanizers Association s wire study was to determine the working load limit for support wire that
K2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
Tubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
Fall Protection Guidelines
OCT 2015 1 of 6 Fall Protection Guidelines 1.0 PURPOSE To establish the requirements and procedures to protect employees and other persons conducting work from hazards associated with falling from one
AG 9-4 ArborGard+ tree trunk protector
AG 9-4 ArborGard+ tree trunk protector Specified ArborGard is a tree trunk protector to prevent damage by string trimmers, lawn mowers and rodents. Single protector fits trunks up to 4" in diameter, join
Design No. P736 September 26, 2003. Restrained Assembly Ratings 1, 1-1/2 or 2 Hr. (See Items 3, 7 and 8A)
Design No. P736 September 26, 2003 Restrained Ratings 1, 1-1/2 or 2 Hr (See Items 3, 7 and 8A) Ratings 1, 1-1/2 or 2 Hr (See Items 3, 7 and 8A) Beam Ratings 1, 1-1/2 or 2 Hr (See Items 7 and 8A) 1. Beam
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Safe Use of Safety Nets
BEST PRACTICE GUIDELINES Safe Use of Safety Nets MAY 2014 This best practice guideline outlines safety net requirements and the safe use of safety nets. ACKNOWLEDGEMENTS WorkSafe NZ would like to acknowledge
Medical Silicone Tubing & Hose
Medical Silicone Tubing & Hose Peroxide or Platinum Cured Fluid Transfer Specialists Silcon Medical Medical Grade Silicone Tubing Finished product meets USP Class VI requirements Manufactured under good
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
Removable Insulation Blankets from A to Z
Removable Insulation Blankets from A to Z At first glance, making up a removable insulation blanket seems somewhat simple take some insulation, put some mesh on one side, a cover on the other, sew them
Lightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
GENERAL RUBBER LINING PRINCIPLES
GENERAL RUBBER LINING PRINCIPLES I. METAL PREREQUISITES Metal to be lined should meet the requirements as stated in section 8 Metal Fabrication and section 12 Blasting and Cementing Procedures. The surface
Application Data Important Safety Information
Application Data Important Safety Information Read this page before using any of the information in this catalog. This catalog is designed to be used as a guide in selecting the proper hose for the applications
OSHA 1910.66 Remove impacted systems and components. Inspect systems prior to use.
Q: When do I remove my harness from service? A: ANSI (American National Standards Institute) A10.32-2004 states the service life of fall protection equipment manufactured of synthetic fiber shall be 5
Savard Labor & Marine Staffing, Inc. Rigging Safety Rev3/14 Rigging Safety
Rigging Safety The ability to handle materials to move them from one location to another, whether during transit or at the worksite is vital to all segments of industry. Materials must be moved, for example,
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
SECTION 098400 ACOUSTICAL WALL TREATMENT. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 098400 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
TEST PROCEDURE FOR FIELD WITHDRAWAL RESISTANCE TESTING
TESTING APPLICATION STANDARD (TAS) No. 105-98 TEST PROCEDURE FOR FIELD WITHDRAWAL RESISTANCE TESTING 1. Scope 1.1 This Testing Application Standard (TAS) covers procedures for withdrawal resistance testing
SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS
Page 1 of 5 SECTION 08 5656 GUARDA SECURITY WINDOW SCREENS Guarda Security Window Screens in this specification are appropriate for use in windows, storefronts, curtain walls, vents, and any other applications
Denco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
EVALUATION OF THE CARE AND PERFORMANCE OF COMFORT STRETCH KNIT FABRICS. Introduction
EVALUATION OF THE CARE AND PERFORMANCE OF COMFORT STRETCH KNIT FABRICS Elizabeth P. Easter, University of Kentucky, Lexington, KY and Bruce E. Ankenman, Northwestern University, Evanston, IL Introduction
Introduction: Consumables - Part of the Identification System
Consumables - The Basics A presentation from: Introduction: Consumables - Part of the Identification System You have spent many hours researching, selecting, and getting approval for your new data collection
KAYA COMPANIES MISSION STATEMENT; COMPANY PHILOSOPHY; TO MAKE KAYA THE UNDISPUTED WORLD S STRONGEST, MOST PRESTIGIOUS AND TRUSTED BRAND IN ITS SECTOR.
KAYA COMPANIES; A LEADER IN ITS FIELD TODAY, THE KAYA GROUP BEGAN BUSINESS IN THE 1980 S AS KAYA CONSTRUCTION. NOW PREPARING TO CELEBRATE ITS 30TH YEAR OF OPERATION, THE KAYA GROUP CONCENTRATES ITS KNOWLEDGE
Festoon 715 P PUR cable for flexible application in festoon systems
CABLES FOR CRANE AND CONVEYOR APPLICATIONS Festoon 715 P PUR cable for flexible application in festoon systems S AB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C Marking for Festoon 715 P 07150162:
T A B L E T 1 T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A
T A B L E T 1 1 of 7 Tests & Inspection Cable PCUT & PCUT-A (Table T1) T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A No. Test Scale MOC Requirements G 20:10:001:01 Defined Test
Double Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality
IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE
The Original and Patented Stackable Poly Tanks. When You Want to Beat the Drum!
The Original and Patented Stackable Poly Tanks When You Want to Beat the Drum! A TOTE A LUBE STORAGE & DISPENSING SYSTEM IS A LOW COST INVESTMENT THAT PAYS HIGH DIVIDENDS IN TIME SAVED, EFFICIENT USE OF
Secondary Containment Comparison ATI Ultra COAT vs HDPE
When choosing a secondary containment system it must be chosen based on its ability to withstand long term contact with the natural elements (weather), whatever the tanks hold (unrefined oil, fuels, acids,
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
SELECTION AND USE OF ADHESIVE BACKED MOUNTS AND DEVICES
SELECTION AND USE OF ADHESIVE BACKED MOUNTS AND DEVICES PANDUIT offers high performance adhesive backed mounts and devices for a quick, dependable method of securing, routing and protecting wires or cables.
Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.
Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page
Machine Moving. By Norm Berls
Machine Moving By Norm Berls Machine Moving Sources Metalworking: Sink or Swim by Tom Lipton Google Images Vendor Web Pages YouTube Own experiences Formerly professional riggers and movers moved most heavy
With over 100 years of conveyor pulley experience, Baldor Dodge can be trusted to keep your conveyors running.
Lagging for Pulleys Lagging CaPaBiLities Baldor Dodge conveyor pulleys can be provided with high quality lagging designed to ensure maximum belt and pulley life in tough applications. Baldor Dodge has
DIRECT PRINTING NYLON JACKETS. The Basics
DIRECT PRINTING NYLON JACKETS The Basics . The Nylon Jacket Types of Nylon There are three basic weaves that are commonly used to manufacture nylon jackets or outerwear. These are Taffeta, Satin and Oxford.
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
Kids Woven - Minimum Construction Standards
Kids Woven - Minimum Construction Standards NOTE All construction standards will be followed except when specified otherwise Must use Bon-Ton approved suppliers Vendor must meet all applicable Bon-Ton
Broad Base. Best Solutions. SIGRAFIL Continuous Carbon Fiber Tow
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAFIL Continuous Carbon Fiber Tow 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range Q Integrated value chain
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
Specification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
Gas Meter Clearances and Service Installation Requirements
March 2016 Gas Meter Clearances and Service Installation Requirements Builder/Owner/Developer Requirements Call PSE's Customer Construction Services 1 888 321 7779 or visit PSE.com/CustomerConstruction
2016 DISPLAYS & GRAPHIC SUPPLIES 801.973.8929 STORE.VISIONDOESIT.COM LOOK GOOD. BE SEEN.
LOOK GOOD. BE SEEN. 2016 DISPLAYS & GRAPHIC SUPPLIES 801.973.8929 STORE.VISIONDOESIT.COM RETRACTABLE BANNERS FLAGS TENSION DISPLAYS TABLE THROWS A-FRAMES CONTENTS 2-9 SINGLE-SIDED RETRACTABLE BANNER STANDS
KNIT MITTENS PATTERN CHART (for Kids and Teens) Knit on 2 needles with the thumbs on the sides (Provided to Knitting4Peace by Carrie Epps)
KNIT MITTENS PATTERN CHART (for Kids and Teens) Knit on 2 needles with the thumbs on the sides (Provided to Knitting4Peace by Carrie Epps) SIZES: (It may be helpful to highlight the size mitten you are
SFI SPECIFICATION 16.5 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 16.5 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Stock Car Driver Restraint Assemblies 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
Fabcograte FRP Grating. Tolerances: ±1/16. Tolerances: ±1/16. THICKNESS BAR SPACING PANEL SIZE (FT.) WT (LBS) 1" 1.5" x 1.
Features: Will not rust. Corrosion resistant. Non-sparking. Fire retardant. Non-conductive. Maintenance free. Molded-in color. Light weight. Easy to install. Impact resistant. Quality appearance. Fabcograte
Product Inspection Guide
Product Inspection Guide Harness... 1-6 Lanyards - Shock Absorbing...7-10 - Rope 11-15 - Web.16-19 - Wire Rope.. 20-22 Shock Absorbers...23-25 Synthetic Rope - Twisted Rope...26-30 - Braided Rope.30-33
Fire Barrier Duct Wrap 15A
3 Fire Barrier Duct Wrap 15A Commerical Kitchen Grease Duct Fire Protection System Product Data and Installation Instructions Compliance 1998 Edition Complies with International Mechanical Code Complies
Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
Green Thread Product Data
Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Hilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
How To Use Tiger Dam
Use Water to Fight Water QUALITY IS REMEMBERED LONG AFTER PRICE IS FORGOTTEN... www.internationalfloodcontrol.com www.usfloodcontrol.com THE TIGER DAM SYSTEM TM Due to an ever increasing demand for an
Building Cables and Wires
Building Cables and Wires 4 Introduction alfanar is equipped with state-of-the-art manufacturing facilities such as latest machineries, instrumentation, quality control and testing laboratory, etc., for
The entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35
Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: NOVEMBER 2012 Last EDITORIAL Change: JANUARY 2013
- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
Gas Meter Clearances and Service Installation Requirements
March 2015 Gas Meter Clearances and Service Installation Requirements Builder/Owner/Developer Requirements Call PSE s Customer Construction Services 1-888-321-7779 or visit PSE.com/CustomerConstruction
BITUMEN-POLYMER WATERPROOFING MEMBRANE, MADE FROM SELECT APP AND DISTILLED BITUMEN, REINFORCED WITH SPUNBOND POLYESTER FABRIC.
93-106 Revised March 2007 BITUMEN-POLYMER WATERPROOFING MEMBRANE, MADE FROM SELECT APP AND DISTILLED BITUMEN, REINFORCED WITH SPUNBOND POLYESTER FABRIC. BITEC APM-4.5T is a torch applied, mineral surfaced,
T-Slotted Extrusions and Quick Frame
T-Slotted Extrusions and Quick Frame How to Order Introduction to Section 1 Material Specifications Material Strength Area of 80/20 T-Slotted Extrusions Fastener Application Tests Drop Lock & Torque Specifications
DIY Trade Show Handcraft Display
DIY Trade Show Handcraft Display (Uses Wire Hangers and Wine Bottles) www.lagniappepeddler.com Description: This pattern was designed for a simple display that can be made with items you may have on hand.
Greenhouse Sprinkler Systems
N E T A F I M U S A Greenhouse Sprinkler Systems Automated Watering Systems for Greenhouse and Nursery Delivering Superior Uniformity and Higher Plant Values At First Glance Netafim sprinkler systems may
10 x 10 FAST SHADE POP UP CANOPY 1 PC. PRODUCT MANUAL
10 x 10 FAST SHADE POP UP CANOPY 1 PC. PRODUCT MANUAL Read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL NOTICE ver.20140403 The warnings, cautions,
OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such