410 / 810 / 610 Quick Start V0.9- p1

Transcription

1 1. DVR 2. Quick Start Guide 3. IR Remote Control *:Please press DVR1 button before operation it 4. Battery 2 pcs 5. CD 6. Hard Disk Mount 2sets 7. Screw 20pcs 8. Power Adapter 9. Power Cord 10.SATA Cord 3pcs for 16CH, 2pcs for 8CH/4CH 11.IDE to SATA Power Cord (for 16CH Only) 12. DB 26 (for 16CH Only) Note: Standard shipping products include neither HDD nor DVD R/W 410 / 810 / 610 Quick Start V0.9- p1

2 Step 1: Fix the HDD to rack mount with the screws as indicated. Step 2: Place the HDD on the HDD plate and screw as indicated. Step 3: Connect the power and the flat cables as indicated. NOTE: The initialization of new-installed HDD is required before recording, please refer to manual 4-9 UTILITY SETUP for detail. 410 / 810 / 610 Quick Start V0.9- p2

3 Step 1: Remove the front cover from DVR. Step 2: Put the CD-RW into the unit as indicated. Step 3: Put DVR bottom up, screw to fix the CD-RW as indicated. Step 4: Connect the power and the flat cables as indicated. 410 / 810 / 610 Quick Start V0.9- p3

4 A IR A REC A PLAY A T-SRH A BACKUP/ESC A MENU/ A ZOOM A PIP A ENTER/MODE A / A / A / A / A LED A 1E Begin and stop recording. A 2E Play back in normal speed. A 3E A 4E A 5E 6 AUTO A 7E A 8E Display the search menu. In LIVE mode, press to copy recorded data from HDD to USB device or built-in CD-RW. In SETUP mode, press to return to last page. Display menu. In PLAYBACK mode, press to pause playback. Start auto sequencing of the channels in full screen mode. Digital 2x zoom-in. Display a picture in picture. A 9E A 10E A 11 E A 12E A 13E A 14E In SETUP mode, press to enter values. In PLAYBACK mode, press to switch between full screen, quad display, 9-channel display, and 16-channel display. In SETUP mode, press to move cursor down. In PLAYBACK mode, press to stop playing back. SLOW In SETUP mode, press to move cursor up. In PLAYBACK mode, press to slow down. In SETUP mode, press to increase value. In PLAYBACK mode, press to play forwards. In SETUP mode, press to reduce value. In PLAYBACK mode, press to play backwards. Display (Start from the left to the right.) Power:Status of power HDD:Hard Disk LAN:Network connected (Red) Remote user login. REC:Recording (or Schedule Recording and recording are on) PLAY:PLAYBACK A 15E Sensor USB 2.0 Port CD/DVD Writer Input sensor for the remote control. Port for a USB memory stick, or USB external devices. CD-RW or DVD±RW (Optional) 410 / 810 / 610 Quick Start V0.9- p4

5 A MAIN A SPOT A VIDEO A AUDIO A VGA A Fan A DC A POWER A EXTERNAL A LAN A E-SATA A AUDIO (16CH) A 1E A 2E A 3E A 4E A 5E A 6E A 7E A 8E A 9E monitor monitor IN IN 12V I/O 10 NTSC/PAL Switch A 11 E A 12E A 13E OUT BNC port for the main monitor BNC port to display full screen image of all installed cameras in sequence BNC input ports for cameras, 16 in total RCA input port for audio signal VGA port DC 12V 40mm X 40mm fan Socket for a DC 12V input Power switch EXTERNAL I/O port for DB 26 flat cable Switch between NTSC and PAL format Network port External SATA hard disks port for expanding recording space RCA output for audio signal 410 / 810 / 610 Quick Start V0.9- p5

6 A MAIN A SPOT A AUDIO A AUDIO A VGA A E-SATA A Fan A EXTERNAL A NTSC/PAL A DC (8CH) (4CH) A 1E A 2E monitor monitor 3 VIDEO IN A 4E A 5E A 6E IN OUT BNC port for the main monitor. BNC port to display full screen image of all installed cameras in sequence. BNC input ports for cameras, RCA input port for audio signal. RCA output for audio signal. VGA port. A 7E A 8E A 9E I/O 10 LAN A 11 E A 12E Switch 12V External SATA hard disks port for expanding recording space DC 12V 40mm X 40mm fan. EXTERNAL I/O port (see below further definitions). Network port. Switch between NTSC and PAL format. Socket for a DC 12V input. (8CH) (4CH) 410 / 810 / 610 Quick Start V0.9- p6

7 0BUnder LIVE mode, you can watch all channel displays, receive live audio, and operate display changes. Table 6-1 Description of the remote control functions under LIVE mode. REC PLAY Button Start/Stop recording. Description Start playing back the most recently recorded segment. LOCK Enable/Disable the Keypad function on the front panel, the remote control and the mouse. 1,2,3,4 Select the channel to monitor in full screen from channel 1 to 4. FREEZE Turn on/off screen freeze function. Switch to quad display. Switch to 9-channel display. 4ch DVR doesn t feature this function. ENTER/MODE MENU/ BK-UP/ESC SRH MUTE STATUS OSD ZOOM/ZOOM- PIP/ ZOOM+ PTZ AUTO DVR1,2,3,4 Switch to 13-channel display. 4ch and 8ch DVRs don t feature this function. Switch to 16-channel display. 4ch and 8ch DVRs don t feature this function. Switch to full screen, quad display. Enable/ Disable setup Menu. Enable/ Disable backup menu. Enable/ Disable search menu. Switch channel 1 output audio / turn off LIVE audio Enable/ Disable Status. Turn on/off the screen display Enable/ Disable double screen size display. You can click on the channel name for choosing a specific channel. Turn on picture-in-picture format. Click on the channel name can switch to other channels. Enable PTZ control. In AUTO mode, all available channels will be cycled through in full screen. Switch DVR ID1~4 * Note:4CH will show quad display; 8 CH will show quad display and 9-channel display. * Default ID is ID1. If remote control malfunctions, please press, DVR1 button to renew corresponding DVR ID. 410 / 810 / 610 Quick Start V0.9- p7

8 Table 6-2 Graphical icons displaying after right-clicking your mouse under LIVE mode. Icon Description Resting the cursor on this icon will bring up the following four menu icons. Main MENU SEARCH menu BACK-UP menu PTZ mode Turn on/off recording. *Note 1 Playback. Resting the cursor on this icon will bring up the following five display icons. FREEZE PIP, picture in picture ZOOM AUTO sequence LOCK Full screen display Quad display 9-channel display 13-channel display 16-channel display Note:4CH will show quad display; 8 CH will show quad display and 9-channel display. Note 1: Enable/Disable record function details and setup please refer to Appendix III: Record Mode Comparison 410 / 810 / 610 Quick Start V0.9- p8

9 Table 6-3 Description of on screen graphical icons in LIVE mode Icon Description Recording is on 1~4 LIVE Audio is on LIVE Audio is off Motion detected on the channel Sensor triggered on the channel Video loss detected on the channel USB device detected CD-RW or DVD writer detected Remote user currently logging into DVR. Timer recording is on. Red:Timer is set and recording has been started. White:Timer is set but recording has not yet been started. AUTO-seq is on. 2X 2X zoom-in is on. Freeze is on, screen is frozen. LOCK is on. PTZ control is on. 1~8 Remote control is set to 1-8, meanwhile, ID of each remote control needs to match up with DVR to be able to control it. (DVR default set up ID is 1.) 410 / 810 / 610 Quick Start V0.9- p9

10 Under LIVE mode, press PLAY to playback (default setup is quad display). The function icons will appear in the right down corner on the screen, which can be dragged by mouse to other location on the screen. Table 7-1 Remote control functions under the PLAYBACK mode Icon ENTER/ MODE MENU / PLAY Description Switch to full screen, quad, 9-channel or 16-channel display. Turn on/off PAUSE. Play back at normal speed. / SLOW Play back at slower speed. The speed will be slowed to 1/2, 1/4, 1/8, 1/16 by each pressing of the button till the slowest limitation of 1/16 of the normal speed. Current playback speed is shown in the upper right corner. / Fast rewind. Each press increases the speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Fast forward. Each press increases the speed to the next level. There are six speeds: 2x, 4X, 8X, 16x, 32X and 64X. / Stop playback. Table 7-2 The mouse operation under the PLAYBACK mode. Icon Description / Fast rewind / Fast forward / Play/pause / SLOW,slow playback / stop Playback channel by channel with snap shot display Full screen display (ch1 as default setup. If ch2 is wished to be viewed, please click on this icon again. For the rest of the channels, please proceed with the same instruction) Quad display (ch1-4 as default setup, if ch5-8 are wished to be viewed, please click on this icon again. For the rest of the channels, please proceed with the same instruction.) 9-channel display (ch1-8 as default setup, if ch9-16 are wished to be viewed, please click on this icon again. For the rest of the channels, please proceed with the same instruction.) 16-channel display Note:4CH will show quad display; 8 CH will show quad display and 9-channel display P.S. If playback of a single channel is wished to be viewed, please double click on left key of the mouse on the channel video image. 410 / 810 / 610 Quick Start V0.9- p10

11 Under LIVE mode, press PTZ to enter PTZ camera mode. The function icons will appear right down corner on the screen, which can be dragged by mouse to other location on the screen. Table 8-1 Remote Control functions under the PTZ mode Button / SLOW Move PTZ up / Move PTZ down ZOOM + ZOOM - / Move PTZ to the left / Move PTZ to the right FOCUS + FOCUS - IRIS + IRIS - TOUR PRESET+ Number PLAY+ Number PIP FREEZE PTZ zoom-in PTZ zoom-out PTZ focus-in PTZ focus-out PTZ iris-open PTZ iris-close Description Make PTZ monitor pre-set locations in order* Setup the Preset location Press PRESET key first then two-digit number; DVR will set the current PTZ location at enter ed preset number. Go to Preset location Press PLAY key first then two-digit number, PTZ will go to the correspondent preset number location. Setup the beginning location for the Auto Patrol. * Auto patrol (in line scan) * ZOOM Set up the ending location for the Auto Patrol. * *PTZ communication protocols from different brands aren t compatible 100% sometimes. The refore, some of these functions may be unavailable. 410 / 810 / 610 Quick Start V0.9- p11

12 Table 8-2 The mouse operation under the PTZ mode. Icon Description Leave PTZ Mode, back to the LIVE mode. Pre-set number N.(1~64) Go to pre-set number N. Set PTZ at N. TOUR pre-set locations in order. * Set current location as the beginning for patrol line scan. * AUTO auto patrol line scan. * Set current location as the end of patrol line scan. * To move PTZ in 8 directions. PTZ zoom in; PTZ zoom out. PTZ focus in; PTZ focus out. PTZ IRIS open, PTZ IRIS close. *PTZ communication protocols from different brands aren t compatible 100% sometimes. The refore, some of these functions may be unavailable. 410 / 810 / 610 Quick Start V0.9- p12

13 APPENDIX I I-DVR.NRT REGISTRATION DDNS Registration on I-DVR.NET In the package of each DVR, you will find a sticker shows account information including username and password that allows users to login I-DVR.NET for registration. To register DDNS on I-DVR.NET, please follow the steps as shown. Step 1. Please open IE browser and then enter in IE browser bar. Next, Control Panel Logo dialog will appear. Enter the username and password provided by the sticker and then press, Logon. Step 2. After login successfully, enter name at host in Add New Record dialog. For example, icatchddns is the host name, and then the address will be icatchddns.idvr.net. Select Standard type and enter an IP address of the DVR. Input known IP address if any, or press the Add New button if none. Please enter any name by your choice at Column, host. For example, icatchddns Therefore, IE address will be icatchddns.idvr.net System will automatically show the current c omputer IP. If the DVR IP is known, you can type it in the column. If not, you can press Add new button. Step 3. The Host Manager dialog will show Your new host record was created when user setup successfully. The host.domain column will show up the setup just entered. If DDNS set up at DVR side successfully, the website will update the IP information in one minute. The IP column will be renewed to the corresponding IP address by pressing F5: refresh button. host.domain is named by your choice. icatchddns.idvr.net is what the main server generates If DVR IP has any changes, there are updates Here at the same time. Press, F5: Refresh And then IP column will update automatically to it s real IP Address. 410 / 810 / 610 Quick Start V0.9- p13

14 Step 4. Enter DVR Main Menu Network Setup DDNS. Activate DDNS functions and input related information. 410 / 810 / 610 Quick Start V0.9- p14

15 APPENDIX II DB 26 Definition (For 16CH DVR only) First pin Read Line NUM. WIRE COLOR NUM. WIRE COLOR 1. GND BLUE 14. SENSOR 4 ORANGE 2. GND GREEN 15. SENSOR 5 RED 3. RS 485_B YELLOW 16. SENSOR 6 BROWN 4. RLY1_NO ORANGE 17. SENSOR 7 BLACK 5. RS485_A RED 18. SENSOR 8 WHITE 6. RLY1_COM BROWN 19. SENSOR 9 GRAY 7. VCC +5V BLACK 20. SENSOR 10 AMETHYST 8. RLY1_NC WHITE 21. SENSOR 11 BLUE 9. IR_LED GRAY 22. SENSOR 12 GREEN 10. GND AMETHYST 23. SENSOR 13 YELLOW 11 SENSOR 1 BLUE 24. SENSOR 14 ORANGE 12. SENSOR 2 GREEN 25. SENSOR 15 RED 13. SENSOR 3 YELLOW 26. SENSOR 16 BROWN Note: Pin Num.7,9,10 allows extending IR receiver wire (7 IR Red,9 IR White,10 IR GND). Brief connection method instruction: If it s connected externally to RS485 device (such as dome camera), please connect 485+ (p ositive charge) to the 5th cable and connect 485- to the 3rd cable. If it s connected externally to sensor device (such as infrared sensor), please connect the po sitive charge of equipment to the sensor (1~16) needed to be triggered and connect the neg ative charge to any of GND cable (1, 2, 10.) 410 / 810 / 610 Quick Start V0.9- p15

16 APPENDIX III Record Mode Comparison Comparison between different setups while in Default Record mode and after it s been switch ed. Schedule Record-Motion Schedule Record-Sensor Default Record Mode After Switch Record Mode Enable Enable Default Record Activated Record and EventR ecord have both been activated Enable Disable Default Record Activated Stop Record Disable Enable Default Record Activated Record when event occurs, and stop when none. Disable Disable Default Record Activated. Stop Record 410 / 810 / 610 Quick Start V0.9- p16

17 APPENDIX IV Remote Monitoring IE ActiveX Control Installation Instruction When using IE for remote monitoring for the first time, IE ActiveX Control is needed to be downloaded. 1. When remote monitoring on IE for the first time, an alert message occurs Install ActiveX control on the tool bar. 2. Click at this alert message and select Install ActiveX Control 3. Do you want to install this software alert pops up. Select Install 410 / 810 / 610 Quick Start V0.9- p17

18 4. After installation, IE remote monitoring image appears. 5. If message, Your security Settings do not allow web sites to use ActiveX controls installed on your computer. pops on when logging in, please follow the next instruction. 6. First select Tools on the tool bar and then select Internet Options 410 / 810 / 610 Quick Start V0.9- p18

19 7. Select Security Trusted Sites Sites 8. Enter DVR address (This address is only for demonstration. Please use the address depends on the setup of on-site DVR.) into the blanks shown in picture, and then press add. 410 / 810 / 610 Quick Start V0.9- p19

20 9. Newly added website will appear at the trusted web sites list. Press close. 10. Go back to IE window, press refresh button or F / 810 / 610 Quick Start V0.9- p20