S4 4 SUBMERSIBLE ELECTRIC PUMPS
|
|
|
- Esmond Daniel
- 7 years ago
- Views:
Transcription
1 S4 SAND RESISTANT TECNICAL DATA Operating range: from 0,3 to 24 m 3 /h. Maximum head: up to 320 metres. Pumped liquid: clean, free of solids and abrasives, chemically neutral, with properties similar to water. Liquid temperature range: from 0 C to +40 C. Maximum permitted amount of sand: 120 g/m gr/m 3 (only for S4F) Installation: in 4 wells or larger, tanks and cisterns, vertical position. Starts/hour: max 20. Cooling flow: 8 cm/s. Special executions on requests: alternative voltages and/or frequencies. On request, the single phase version can be supplied with CONTROL BOX BOOSTER for the increase of the starting torque. Electric pumps complying with the 2009/125/EC Directive (EcoDesign - ErP) M.E.I. 0.4 APPLICATIONS Submersible electric pumps for 4 wells or larger, capable of generating a wide range of flows and heads. These units have a very extensive range of applications for lifting, distribution, and pressurisation in civil and industrial water systems, filling of pressure vessels and tanks, fire-fighting systems and washing of irrigation systems. CONSTRUCTION FEATURES OF TE PUMP Multistage centrifugal type with radial or semi-axial impellers. Pump and motor directly coupled with rigid coupling. Technopolymer impellers with stainless steel wearing parts, fitted on floating clearance rings made of synthetic low abrasion material, and technopolymer diffusers that impart significant wear resistance to the pump. Pump liner, shaft and coupling, strainer and cable sheath in stainless steel. Base support and upper head in microcast AISI 304 stainless steel; check valve incorporated in the head. The pumps comply with the European Community Directives. CONSTRUCTION FEATURES OF TE MOTOR Submersible asynchronous two-pole motor made of AISI 304 stainless steel. Squirrel cage rotor mounted on self-centring thrust block designed to withstand significant axial loads. Cooling of the bearing assembly and the bushings is provided by water, thereby eliminating the risk of contamination. Canned-type stator installed inside an airtight casing made of stainless steel. Flanging: NEMA - 4 Protection class: IP68 Insulation class: F Supply voltage: single-phase 230 V / 50 z. three-phase 400 V / 50 z. three-phase 230 V / 50 z. Electric pump with 4OL motor in oil bath available on request. SUPPLY Control box (for the single-phase version) and motor to be ordered separately. 38
2 S4 MATERIALS N. PART* MATERIALS 3 BASE SUPPORT AISI 304 MICROCAST STAINLESS STEEL IMPELLER 6 DIFFUSER TECNOPOLYMER A TECNOPOLYMER A with thrust in STAINLESS STEEL AISI 304 X5CrNi UNI 6900/71 7 SAFT WIT COUPLING STAINLESS STEEL AISI 304 X5CrNi UNI 6900/ LOCKING NUT STAINLESS STEEL 39 CABLE SEAT STAINLESS STEEL AISI 304 X5CrNi UNI 6900/71 42 STRAINER STAINLESS STEEL 49 VALVE STAINLESS STEEL AISI 304 X5CrNi UNI 6900/71 54 MOTOR STAINLESS STEEL AISI 304 X5CrNi UNI 6900/ SPACER TECNOPOLYMER A SUPPORT TECNOPOLYMER A 58 INTERMEDIATE BUSING STAINLESS STEEL AISI 304 X5CrNi UNI 6900/ PUMP LINER STAINLESS STEEL AISI 304 X5CrNi UNI 6900/71 98 DIFFUSER BODY TECNOPOLYMER A UPPER EAD AISI 304 MICROCAST STAINLESS STEEL 191 FRONT TRUST RING ABRASION-PROOF SYNTETIC MATERIAL 192 REAR TRUST RING ABRASION-PROOF SYNTETIC MATERIAL 270 UPPER SAFT GUIDE BUS RUBBER 271 INTERMEDIATE SAFT GUIDE BUS ABRASION-PROOF SYNTETIC MATERIAL * In contact with the liquid. Denomination index: (example) Submersible pump (stainless steel delivery and suction supports). S 4 C 13 Diameter (in inches) of the submersible pump A - B - C - D - E - F = Geometry of the impeller Number of stages 39
3 PERFORMANCE AT 50 z S4 A 8 0,37 0,5 S4 A YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min ,4 26,8 13, S4 A 12 0,37 0,5 76,5 66,6 40,2 20, S4 A 18 0,55 0,75 114,8 99,8 60,3 30, (m) S4 A 25 0, ,4 138,7 83,7 42, S4 A 36 1,1 1,5 229, ,6 61, S4 A 50 1, ,8 277,4 167,5 85, AND DIMENSIONS S4 A 8 MOTOR P2 NOMINAL POWER INPUT kw P 50 z PACKING DIMENSIONS Ø In mm mm A L/A L/B VOLUME m 3 4GG M 0,37 0,5 1x230 V ~ 3, ,009 11,2 4OL M 0,37 0,5 1x230 V ~ 3, ,009 10,8 WEIGT kg S4 A 12 S4 A 18 S4 A 18 S4 A 25 S4 A 25 S4 A 36 S4 A 36 S4 A 50 4GG M 0,37 0,5 1x230 V ~ 3, ,009 12,5 4OL M 0,37 0,5 1x230 V ~ 3, ,009 12,1 4GG M 0,55 0,75 1x230 V ~ 4, ,011 14,5 4OL M 0,55 0,75 1x230 V ~ 4, ,011 13,8 4GG T 0,55 0,75 3x400 V ~ 1, ,011 13,2 4OL T 0,55 0,75 3x400 V ~ 2, ,011 12,8 4GG M 0,75 1 1x230 V ~ 6, ,013 19,8 4OL M 0,75 1 1x230 V ~ 6, ,013 19,4 4GG T 0,75 1 3x400 V ~ 2, , OL T 0,75 1 3x400 V ~ 2, ,013 14,3 4GG M 1,1 1,5 1x230 V ~ 8, , , OL M 1,1 1,5 1x230 V ~ 8, , ,023 18,5 4GG T 1,1 1,5 3x400 V ~ 3, , ,023 22,6 4OL T 1,1 1,5 3x400 V ~ 3, , ,023 21,3 4GG M 1,5 2 1x230 V ~ , ,028 27,8 4OL M 1,5 2 1x230 V ~ 10, , ,028 20,3 S4 A 50 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. 4GG T 1,5 2 3x400 V ~ 4, , ,028 26,8 4OL T 1,5 2 3x400 V ~ 4, , ,028 25,5 40
4 S4 A DNM: 1 1/4 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
5 PERFORMANCE AT 50 z S4 B 5 0,37 0,5 S4 B YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min , S4 B 8 0,37 0,5 49,6 47,8 41,5 36,2 30, S4 B 12 0,55 0,75 74,4 71,8 62,3 54,4 45, S4 B 16 0, ,2 95, , (m) S4 B 24 1,1 1,5 148,8 143,5 124,6 108,7 91, S4 B 32 1, ,4 191, ,9 122, S4 B 40 2, ,2 207,6 181,2 152, S4 B 48 2, ,6 287,1 249,2 217,4 183, AND DIMENSIONS S4 B 5 MOTOR P2 NOMINAL POWER INPUT kw P 50 z PACKING DIMENSIONS Ø In mm mm A L/A L/B VOLUME m 3 4GG M 0,37 0,5 1x230 V ~ 3, , ,009 10,8 4OL M 0,37 0,5 1x230 V ~ 3, , ,009 10,4 WEIGT kg S4 B 8 S4 B 12 S4 B 12 S4 B 16 S4 B 16 S4 B 24 S4 B 24 S4 B 32 S4 B 32 S4 B 40 S4 B 40 S4 B 48 S4 B 48 4GG M 0,37 0,5 1x230 V ~ 3, ,009 12,1 4OL M 0,37 0,5 1x230 V ~ 3, ,009 11,7 4GG M 0,55 0,75 1x230 V ~ 4, , OL M 0,55 0,75 1x230 V ~ 4, ,009 13,3 4GG T 0,55 0,75 3x400 V ~ 1, ,009 12,5 4OL T 0,55 0,75 3x400 V ~ 2, ,009 12,1 4GG M 0,75 1 1x230 V ~ 6, ,013 15,9 4OL M 0,75 1 1x230 V ~ 6, ,013 15,5 4GG T 0,75 1 3x400 V ~ 2, ,011 14,2 4OL T 0,75 1 3x400 V ~ 2, ,011 13,5 4GG M 1,1 1,5 1x230 V ~ 8, ,018 22,6 4OL M 1,1 1,5 1x230 V ~ 8, ,018 21,3 4GG T 1,1 1,5 3x400 V ~ 3, ,018 16,7 4OL T 1,1 1,5 3x400 V ~ 3, ,018 15,4 4GG M 1,5 2 1x230 V ~ ,023 25,4 4OL M 1,5 2 1x230 V ~ 10, ,023 23,9 4GG T 1,5 2 3x400 V ~ 4, ,019 23,5 4OL T 1,5 2 3x400 V ~ 4, ,019 22,2 4GG M 2,2 3 1x230 V ~ , , OL M 2,2 3 1x230 V ~ , ,028 29,6 4GG T 2,2 3 3x400 V ~ 5, , ,023 25,3 4OL T 2,2 3 3x400 V ~ , ,023 25,5 4GG M 2,2 3 1x230 V ~ , ,028 32,3 4OL M 2,2 3 1x230 V ~ , ,028 32,9 4GG T 2,2 3 3x400 V ~ 5, , ,028 27,5 4OL T 2,2 3 3x400 V ~ , ,028 27,7 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. 42
6 S4 B DNM: 1 1/4 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
7 PERFORMANCE AT 50 z S4 C 6 0,37 0,5 S4 C YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min ,8 30,7 29,4 26,4 22,7 13, S4 C 9 0,55 0,75 49,5-47, , , S4 C 13 0, ,5-68,9 66,4 63,7 57,2 49,2 28, S4 C 19 1,1 1,5 104,5-100, ,6 71,8 41, S4 C 25 1,5 2 (m) 137,5-132, , , S4 C 32 2, , ,8 140,8 120,9 70, S4 C 39 2, ,5-206, ,1 171,6 147,4 85, S4 C ,5-238, , , S4 C ,5-270, ,4 192,8 112, AND DIMENSIONS S4 C 6 MOTOR P2 NOMINAL POWER INPUT kw P 50 z In A Ø mm mm PACKING DIMENSIONS L/A L/B VOLUME m 3 4GG M 0,37 0,5 1x230 V ~ 3, , OL M 0,37 0,5 1x230 V ~ 3, ,009 11,6 WEIGT kg S4 C 9 S4 C 9 S4 C 13 S4 C 13 S4 C 19 S4 C 19 S4 C 25 S4 C 25 S4 C 32 S4 C 32 S4 C 39 S4 C 39 S4 C 45 S4 C 51 4GG M 0,55 0,75 1x230 V ~ 4, , ,011 14,2 4OL M 0,37 0,5 1x230 V ~ 3, , ,011 13,5 4GG T 0,55 0,75 3x400 V ~ 1, , ,011 12,5 4OL T 0,55 0,75 3x400 V ~ 2, , ,011 12,1 4GG M 0,75 1 1x230 V ~ 6, , ,013 16,2 4OL M 0,75 1 1x230 V ~ 6, , ,013 15,8 4GG T 0,75 1 3x400 V ~ 2, , ,013 14,5 4OL T 0,75 1 3x400 V ~ 2, , ,013 13,8 4GG M 1,1 1,5 1x230 V ~ 8, , ,018 18,6 4OL M 1,1 1,5 1x230 V ~ 8, , ,018 17,3 4GG T 1,1 1,5 3x400 V ~ 3, , ,018 17,1 4OL T 1,1 1,5 3x400 V ~ 3, , ,018 15,8 4GG M 1,5 2 1x230 V ~ , ,023 25,2 4OL M 1,5 2 1x230 V ~ 10, , , ,7 4GG T 1,5 2 3x400 V ~ 4, , ,023 23,2 4OL T 1,5 2 3x400 V ~ 4, , ,023 21,9 4GG M 2,2 3 1x230 V ~ , ,028 27,4 4OL M 2,2 3 1x230 V ~ , , GG T 2,2 3 3x400 V ~ 5, , ,028 29,5 4OL T 2,2 3 3x400 V ~ , ,028 29,7 4GG M 2,2 3 1x230 V ~ , OL M 2,2 3 1x230 V ~ ,032 38,6 4GG T 2,2 3 3x400 V ~ 5, ,032 33,5 4OL T 2,2 3 3x400 V ~ ,032 33,7 4GG T 3 4 3x400 V ~ 8, , ,037 42,6 4OL T 3 4 3x400 V ~ 7, , ,037 38,6 4GG T 3 4 3x400 V ~ 8, , OL T 3 4 3x400 V ~ 7, ,037 40,3 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. 44
8 S4 C DNM: 1 1/4 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
9 PERFORMANCE AT 50 z S4 D YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min S4 D 4 0,37 0, , ,2 11, S4 D 6 0,55 0, , , ,3 16, S4 D 8 0, ,5 22, S4 D 13 1,1 1, ,7 71,5 68, ,6 36, S4 D 17 1, ,5 89,5 77,5 68,8 47, S4 D 21 2, , , (m) S4 D 25 2, , ,5 101, S4 D , ,4 81, S4 D , ,7 95, S4 D , ,9 106, S4 D , , , AND DIMENSIONS S4 D 4 S4 D 6 S4 D 6 S4 D 8 S4 D 8 S4 D 13 S4 D 13 S4 D 17 S4 D 17 S4 D 21 S4 D 21 S4 D 25 S4 D 25 S4 D 29 S4 D 34 S4 D 38 S4 D 45 MOTOR 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. P2 NOMINAL POWER INPUT kw P 50 z PACKING DIMENSIONS Ø In mm mm A L/A L/B VOLUME m 3 4GG M 0,37 0,5 1x230 V ~ 3, ,009 11,8 4OL M 0,37 0,5 1x230 V ~ 3, ,009 11,4 4GG M 0,55 0,75 1x230 V ~ 4, ,009 13,5 4OL M 0,55 0,75 1x230 V ~ 4, ,009 12,8 4GG T 0,55 0,75 3x400 V ~ 1, , OL T 0,55 0,75 3x400 V ~ 2, ,009 11,6 4GG M 0,75 1 1x230 V ~ 6, , OL M 0,75 1 1x230 V ~ 6, ,011 14,6 4GG T 0,75 1 3x400 V ~ 2, ,011 13,5 4OL T 0,75 1 3x400 V ~ 2, ,011 12,8 4GG M 1,1 1,5 1x230 V ~ 8, , ,013 17,5 4OL M 1,1 1,5 1x230 V ~ 8, , ,013 16,2 4GG T 1,1 1,5 3x400 V ~ 3, , ,013 15,8 4OL T 1,1 1,5 3x400 V ~ 3, , ,013 14,5 4GG M 1,5 2 1x230 V ~ , ,018 19,6 4OL M 1,5 2 1x230 V ~ 10, , ,018 18,1 4GG T 1,5 2 3x400 V ~ 4, , ,018 17,8 4OL T 1,5 2 3x400 V ~ 4, , ,018 16,5 4GG M 2,2 3 1x230 V ~ , ,023 24,9 4OL M 2,2 3 1x230 V ~ , ,023 25,5 4GG T 2,2 3 3x400 V ~ 5, , ,019 20,1 4OL T 2,2 3 3x400 V ~ , ,019 20,3 4GG M 2,2 3 1x230 V ~ , ,023 25,8 4OL M 2,2 3 1x230 V ~ , ,023 26,4 4GG T 2,2 3 3x400 V ~ 5, , ,023 26,5 4OL T 2,2 3 3x400 V ~ , ,023 26,7 4GG T 3 4 3x400 V ~ 8, ,026 32,5 4OL T 3 4 3x400 V ~ 7, ,026 28,5 4GG T 3 4 3x400 V ~ 8, , ,032 36,5 4OL T 3 4 3x400 V ~ 7, , ,032 32,5 4GG T 4 5,5 3x400 V ~ ,032 43,6 4OL T 4 5,5 3x400 V ~ 10, ,032 37,8 4GG T 4 5,5 3x400 V ~ , OL T 4 5,5 3x400 V ~ 10, ,037 40,2 WEIGT kg 46
10 S4 D DNM: 1 1/4 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
11 PERFORMANCE AT 50 z S4 E 6 0,75 1 S4 E YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min , , ,6 7, S4 E 8 1,1 1, ,4 10, S4 E 12 1, ,2 15, S4 E 17 2, , , ,8 21, S4 E , ,6 25, S4 E (m) 155, , ,5 67,4 29, S4 E ,5 182, , ,5 79,2 34, S4 E ,5 209, ,9 39, S4 E 36 5,5 7,5 243, ,5 46, S4 E 42 5,5 7,5 283, , AND DIMENSIONS S4 E 6 MOTOR P2 NOMINAL POWER INPUT kw P 50 z PACKING DIMENSIONS Ø In mm mm A L/A L/B VOLUME m 3 4GG M 0,75 1 1x230 V ~ 6, , ,011 15,4 4OL M 0,75 1 1x230 V ~ 6, , , WEIGT kg S4 E 6 S4 E 8 S4 E 8 S4 E 12 S4 E 12 S4 E 17 S4 E 17 S4 E 20 S4 E 23 S4 E 27 S4 E 31 S4 E 36 S4 E 42 4GG T 0,75 1 3x400 V ~ 2, , ,011 13,9 4OL T 0,75 1 3x400 V ~ 2, , ,011 13,2 4GG M 1,1 1,5 1x230 V ~ 8, , ,013 17,1 4OL M 1,1 1,5 1x230 V ~ 8, , ,013 15,8 4GG T 1,1 1,5 3x400 V ~ 3, , ,013 15,5 4OL T 1,1 1,5 3x400 V ~ 3, , ,013 14,2 4GG M 1,5 2 1x230 V ~ , ,019 19,5 4OL M 1,5 2 1x230 V ~ 10, , , GG T 1,5 2 3x400 V ~ 4, , ,019 18,5 4OL T 1,5 2 3x400 V ~ 4, , ,019 17,2 4GG M 2,2 3 1x230 V ~ , ,028 25,9 4OL M 2,2 3 1x230 V ~ , ,028 26,5 4GG T 2,2 3 3x400 V ~ 5, , ,023 20,9 4OL T 2,2 3 3x400 V ~ , ,023 21,1 4GG T 3 4 3x400 V ~ 8, ,028 25,2 4OL T 3 4 3x400 V ~ 7, ,028 21,2 4GG T 3 4 3x400 V ~ 8, , ,032 29,5 4OL T 3 4 3x400 V ~ 7, , ,032 25,5 4GG T 4 5,5 3x400 V ~ ,037 45,8 4OL T 4 5,5 3x400 V ~ 10, , GG T 4 5,5 3x400 V ~ , OL T 4 5,5 3x400 V ~ 10, ,037 42,2 4GG T 5,5 7,5 3x400 V ~ , OL T 5,5 7,5 3x400 V ~ 13, ,097 59,3 4GG T 5,5 7,5 3x400 V ~ , OL T 5,5 7,5 3x400 V ~ 13, ,107 62,5 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. 48
12 S4 E DNM: 2 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
13 PERFORMANCE AT 50 z S4 F 7 2,2 3 S4 F YDRAULIC DATA P2 NOMINAL Q=m 3 /h 0 0,6 1,2 1,5 1,8 2,4 3 4,2 4, , kw P Q=l/min , S4 F , S4 F ,5 (m) , S4 F 18 5,5 7,5 104, , AND DIMENSIONS S4 F 7 M MOTOR P2 NOMINAL POWER INPUT kw P 50 z PACKING DIMENSIONS Ø In mm mm A L/A L/B VOLUME m 3 4GG M 2,2 3 1x230 V ~ , ,018 23,5 4OL M 2,2 3 1x230 V ~ , ,018 24,1 WEIGT kg S4 F 7 T S4 F 10 T S4 F 13 T S4 F 18 T 4GG T 2,2 3 3x400 V ~ 5, , , OL T 2,2 3 3x400 V ~ , ,018 20,2 4GG T 3 4 3x400 V ~ 8, , ,023 23,6 4OL T 3 4 3x400 V ~ 7, , , GG T 4 5,5 3x400 V ~ ,028 34,5 4OL T 4 5,5 3x400 V ~ 10, ,028 28,7 4GG T 5,5 7,5 3x400 V ~ , , OL T 5,5 7,5 3x400 V ~ 13, , ,037 37,1 4GG motor: 4 encapsulated in water bath. 4OL motor: 4 rewindable in oil bath. 50
14 S4 F DNM: 2 GAS Ø Performance at 50 z 2 poles. The performance curves are based on kinematic viscosity values = 1 mm 2 /s and density equal to 1000 kg/m 3. Curve tolerance according to ISO
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
Max. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
VERTICAL TURBINE AND PROPELLER PUMPS
VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump
MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL. Water supply. Sprinkler irrigation. Pressure boosting. Fire-fighting.
4 Submersible Pumps GS Series MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL. APPLICATIONS Water supply. Sprinkler irrigation. Pressure boosting. Fire-fighting. Compact Sturdy Abrasion resistant All components
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
Vertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL.
Twin- Impeller Centrifugal Electric Pumps CA-CA(N) Series Standard supplied IE2 motors are compliant with Regulation (EC) no. 640/2009. MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL. APPLICATIONS Version
JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
PS1800 Centrifugal Pumping Systems
PS1 Centrifugal Pumping Systems General Data and Sizing Tables The curve show the performance range of 4 models at 1Wp solar array - irradiation of 6kWh/m² on a tilted surface - ambient temperature 3 C
IN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
MULTISTAGE CENTRIFUGAL PUMPS
MULTISTAGE CENTRIFUGAL PUMPS MULTISTAGE CENTRIFUGAL PUMPS TK - TKR - VTK - TKK series TK-VTK-TKR-TKK are high pressure multistage pumps. Connection to the driving machine (generally an electrical motor)
Conlift1, Conlift2, Conlift2 ph+
GRUNDFOS DATA BOOKLET Conlift1, Conlift2, Conlift2 ph+ Small lifting stations 50 Hz CONLIFT1, CONLIFT2, CONLIFT2 ph+ Table of contents 1. Product overview 3 Conlift for condensate applications 3 Applications
OUR PRODUCTS TRH-TRS-TRM-TRV. LIQUID RING VACUUM PUMPS AND COMPRESSORS Capacity up to 2100 ACFM Vacuum to 29 Hg. Our Other Products.
Our Other Products OUR PRODUCTS Liquid Ring & Rotary Vane Vacuum Pumps and Systems Liquid Ring Vacuum Pumps: 3 CFM to,000 CFM Liquid Ring Compressors up to 1 psig Heat Transfer Pumps for hot thermal oils
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
The Company. QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design,
The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design, manufacturing and service needs in the field of submersible pumps. Our engineering
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
VM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Pumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
Cerobear Spindle Bearings for Machine Tool Applications
Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
SIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
How To Pump A Pump
Multistage Pumps P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series MP with smaller
VXT. Open Cooling Towers. Open Cooling Towers. Product Detail VXT - B 1. Engineering Data... B2. Structural Support... B6
- B 1 Product Detail Engineering Data... B2 Structural Support... B6 Engineering Specifications... B9 - B 2 Engineering Data REMARK: Do not use for construction. Refer to factory certified dimensions &
sealed close coupled pumps
sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed
Raising the waters. Lift irrigation is getting a boost from ABB s synchronous motors
Raising the waters Lift irrigation is getting a boost from ABB s synchronous motors JARI LINDSTRÖM, TAPIO RAUHALA, MAGNUS REJSTRÖM In India, the scarcity of water is unfortunately a harsh reality. Still,
TECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125
Vogel Pumpen Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125 1 Performance range: Capacities up to 340 m 3 /h (1500 USgpm) Head up to 500 m (1640 feet) Max. speed up to 3600 min
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
BASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
Maintenance and Service Instruction
Screw pumps E4 Maintenance and Service Instruction E4 1 IMO AB This instruction is valid for all E4 pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service
APPLICATIONS Water systems for municipal, multiple housing, commercial, in water fountains, irrigation, mine de-watering, and farm use.
The L6TS Series Submersible features heavy-duty 34 stainless steel construction that will out perform ordinary fabricated stainless steel pumps in aggressive water conditions. APPLICATIONS Water systems
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
PUMP VIBRATION STANDARDS GUIDELINES
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER PUMP VIBRATION STANDARDS GUIDELINES First edition - 15 July 2013
FIRE FIGHTING PACKAGES
FIRE FIGHTING PACKAGES UNE 166.002 ISO 14001 0128 A Leader s Response Bombas Ideal S.A. has been manufacturing pumps since 1902. Throughout this period, the most advance technology available has been used
HORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
Dry Pit Solids Handling Pumps
Dry Pit Solids Handling Pumps A Time-Tested Leader Chicago Pump Dry Pit Solids Handling Pumps have an established reputation of efficiency, long life and reliable operation First in: Quality 3Reliability
Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz PUMP HANDBOOK Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
This instruction is valid for all ACD pump models shown on page 2
Screw pumps ACD Maintenance and Service Instruction This instruction is valid for all ACD pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service intervals
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
Mechanical shaft seal types and sealing systems
Chapter 2 Mechanical shaft seal types and sealing systems 1. Mechanical shaft seal types 2. Sealing systems 3. Selecting a mechanical shaft seal Mechanical shaft seal types and sealing systems 1. Mechanical
Oil & Gas. CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition.
Oil & Gas CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition. 2 Introduction CHTR Reliable delivery at high pressure. Day in and day out, KSB pumps prove their worth again
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
Goulds Water Technology
APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼" NPT suction, 1" NPT discharge, 1" NPT drive (pressure) Pressure switch: AS4 preset
AC Electric Motors best practice
If you want to learn more about best practice machinery maintenance, or world class mechanical equipment maintenance and installation practices, follow the link to our Online Store and see the Training
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
Flygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
Compact pumps from the wastewater experts. FLYGT 3045, 3057, 3068. Power range 0.75 2.4 kw.
Compact pumps from the wastewater experts FLYGT 304, 307, 3068. Power range 0.7.4 kw. Wastewater is unpredictable, Flygt pumps are not If you want a wastewater pump that just works month after month, year
Inline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
Uniquely designed and engineered specifically for the pulp and paper industry.
Universal SPU2 Series Uniquely designed and engineered specifically for the pulp and paper industry. For more than half a century, Waukesha Cherry-Burrell has been a leader in the design, manufacturing
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Pump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Défumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
WATER pressure. Issue 3 / 2014. Clear water pumps for domestic and commercial applications
Issue 3 / 214 WATER pressure PUMPS AND washdown transfer pumps Clear water pumps for domestic and commercial applications Email: enquiries@dlmwallace.co.nz Web: www.dlmwallace.co.nz Auckland: Maurice Road,
Pumps for Pipelines and Transportation
Engineering Flow Solutions Pumps for Pipelines and Transportation API 610 / ISO 13709:9 Midstream The main volume of the oil transit accounts for the pipeline transport. Around 97% of produced oil is
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES IE2 FRAMES 80 355 0,75 315kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in this catalogue satisfy the essential
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
SIR 900-1100. INTERMEDIATE LIFTING STATIONS Communal waste water 50 Hz OPERATING LIMITS APPLICATIONS. AdVANTAGES
OPERATING LIMITS Useful volume up to : L 9 L Ambient temperature : to + C Max.fluid temperature : + C* passing blade at : mm Ø Inlet dia. : mm DN Ø Outlet dia. : / Ø Vent dia.: mm Ø Cable passage : mm
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
SUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
Solenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
A S Y N C H R O N O U S M O T O R S
ASYNCHRONOUS M O T O R S S E R I E S INDAR ASYNCHRONOUS MOTORS S E R I E S WHO WE ARE Indar Electric s trajectory is endorsed by the construction of thousands of motors for the different industrial sectors.