ZINCALUME Steel Grade Data Sheets
|
|
- Terence Lawrence
- 7 years ago
- Views:
Transcription
1 1 ZINCALUME Steel s
2 2 ZINCALUME Steel Grade 33 ZINCALUME Steel Grade 33 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 33 ksi with good ductility. Yield strength, ksi Carbon (C) 0.20 Tensile strength, ksi Phosphorus (P) 0.04 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 5
3 3 ZINCALUME Steel Grade 37 ZINCALUME Steel Grade 37 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 37 ksi with good ductility. Yield strength, ksi Carbon (C) 0.20 Tensile strength, ksi Phosphorus (P) 0.04 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 5
4 4 ZINCALUME Steel Grade 40 ZINCALUME Steel Grade 40 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 40 ksi with good ductility. Yield strength, ksi Carbon (C) 0.25 Tensile strength, ksi Phosphorus (P) 0.10 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 5
5 5 ZINCALUME Steel Grade 50 (Class 1) ZINCALUME Steel Grade 50 (Class I) - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 50 ksi with good ductility. Typical Thickness (Inches) Maximum.0296" Typical width Maximum 48.9" Minimum.018" Minimum 26" Yield strength, ksi Carbon (C) 0.40 Tensile strength, ksi Phosphorus (P) 0.20 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 3 ** Maximum thickness suitable for organic coil coating is
6 6 ZINCALUME Steel Grade 50 (Class 2) ZINCALUME Steel Grade 50 (Class II) - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 50 ksi with good ductility. Typical Thickness (Inches) Maximum.0228" Typical width Maximum 48.9" Minimum.019" Minimum 26" Yield strength, ksi Carbon (C) 0.40 Tensile strength, ksi Phosphorus (P) 0.20 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 3 ** Maximum thickness suitable for organic coil coating is
7 7 ZINCALUME Steel Grade 80 (Class 1) ZINCALUME Steel Grade 80 - hot-dip zinc/aluminum alloy-coated structural steel with a spangled surface and guaranteed minimum yield strength of 80 ksi with good ductility. Typical Thickness (Inches) Maximum.0356" Typical width Maximum 48.9" Minimum.012" Minimum 28" Yield strength, ksi Carbon (C) 0.20 Tensile strength, ksi Phosphorus (P) 0.04 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) 0.04 Coating class AZ50 AZ55 Bending 2 Roll-forming 4 ** Maximum thickness suitable for organic coil coating is
8 8 ZINCALUME Steel Grade CS (Type A) ZINCALUME Steel Grade CS (Type A) - hot-dip zinc/aluminum alloy-coated profiling steel with a spangled surface and with good ductility. Suitable for bending and moderate forming Roll-formed roofing, rainwater goods and general manufacturing. Yield strength, ksi Carbon (C) 0.20 Tensile strength, ksi Phosphorus (P) 0.04 Elongation in 2 inch, minimum % Manganese (Mn) 1.15 Hardness, HRB Sulfur (S) º Transverse bend (L axis) - 0t Coating class AZ50 AZ55 Bending 2 Roll-forming 4
9 9 ZINCALUME Steel Grade CS (Type B) ZINCALUME Steel Grade CS (Type B) - hot-dip zinc/aluminum alloy-coated profiling steel with a spangled surface and with good ductility. Suitable for bending and moderate forming Roll-formed roofing, rainwater goods and general manufacturing. Yield strength, ksi Carbon (C) Tensile strength, ksi Phosphorus (P) 0.03 Elongation in 2 inch, minimum % Manganese (Mn) 0.60 Hardness, HRB Sulfur (S) º Transverse bend (L axis) - 0t Coating class AZ50 AZ55 Bending 5 Tension leveling Leveled Drawing 2 Surface conditioning Not Skin-passed Skin passed, Pressing (paint line feed) Pittsburgh Lock Seam 5
10 10 ZINCALUME Steel Grade CS (Type C) ZINCALUME Steel Grade CS (Type C) - hot-dip zinc/aluminum alloy-coated profiling steel with a spangled surface and with good ductility. Suitable for bending and moderate forming Roll-formed roofing, rainwater goods and general manufacturing. Yield strength, ksi Carbon (C) 0.08 Tensile strength, ksi Phosphorus (P) 0.10 Elongation in 2 inch, minimum % Manganese (Mn) 0.60 Hardness, HRB Sulfur (S) º Transverse bend (L axis) - 0t Coating class AZ50 AZ55 Bending 5 Tension leveling Leveled Drawing 2 Surface conditioning Not Skin-passed Skin passed, Pressing 2 (paint line feed) Pittsburgh Lock Seam 5
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationStandard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1
Designation: A 2/A 2M 04a e1 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 1 This standard is issued
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationNorth American Stainless
Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationNorth American Stainless
North American Stainless Flat Product Stainless Steel Grade Sheet 316 (S31600)/EN 1.4401 316L (S31603)/ EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic stainless
More informationCLAIMS POLICY. Steelscape products will meet or exceed quality criteria as described in the most recent versions of the following standards:
1 CLAIMS POLICY Steelscape strives to consistently provide high quality products to meet or exceed our customers needs. Unfortunately perfection cannot always be attained and products may not fulfill the
More informationAlternative Steel Materials to BS 5950
BC 1: 2008 Design Guide on Use of Alternative Steel Materials to BS 5950 BCA Sustainable Construction Series 3 The education and research arm of the Building and Construction Authority 200 Braddell Road
More informationStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
More informationGUIDELINE SPECIFICATIONS
GUIDELINE SPECIFICATIONS GORDON SOFFIT-SHIELD - An Exterior Metal Soffit System DIVISION 05 5800 or DIVISION 07 7700 Note To Specifier: SOFFIT-SHIELD should be installed by tradesmen that are experienced
More informationTechnical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
More informationSTRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
More informationThe Suitability of CRA Lined Pipes for Flowlines Susceptible to Lateral Buckling SUT Global Pipeline Buckling Symposium, 23 24 February 2011
The Suitability of CRA Lined Pipes for Flowlines Susceptible to Lateral Buckling SUT Global Pipeline Buckling Symposium, 23 24 February 2011 Duncan Wilmot, Technical Manager, Cladtek International, Australia
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationAluminized Steel Type 1 STAINLESS 409 and 439
P R O D U C T D A T A B U L L E T I N Aluminized Steel Type 1 STAINLESS and Excellent Resistance to Pitting Corrosion from Road Salt Excellent Resistance to Muffler Condensate Corrosion Red Rust Protection
More informationStructural welding is a process by which the parts that are to be connected are heated and
CHAPTER 6. WELDED CONNECTIONS 6.1 INTRODUCTORY CONCEPTS Structural welding is a process by which the parts that are to be connected are heated and fused, with supplementary molten metal at the joint. A
More informationDIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
More informationAfrica s leading steel supplier CATALOGUE TUBE & PIPE. The Macsteel Group - Africa s leading steel supplier - www.macsteel.co.za
Africa s leading steel supplier CATALOGUE TUBE & PIPE - www.macsteel.co.za TUBE & PIPE CONTENTS 1. Contents 13. Conveyance SANS 1182 - Light Page 7 2. Contact Details 14. Conveyance SANS 719 - Large Bore
More informationJIS G3445 Carbon steel tubes for machine structural purposes
JIS G3445 arbon steel tubes for machine structural purposes 1. Scope This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter referred to as the "tubes", used for machinery, automobiles,
More informationThe Original Carbon Fiber Reinforced Polymer System
Infrastructure The Original Carbon Fiber Reinforced Polymer System Phone: 52.292.39 Toll Free: 866.38.269 Fax: 52.48.5274 282 E. Fort Lowell Rd. Tucson, AZ 8576 www.dowaksausa.com Test results are supported
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationMetal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
More informationHilti, Inc. 5400 South 122 nd East Avenue Tulsa, OK 74146. 1-800-879-8000 www.hilti.com
Attached are page(s) from the 2014 Hilti North American Product Tech Guide. For complete details on this product, including data development, product specifications, general suitability, installation,
More informationClaims Management Policy
Claims Management Policy INTRODUCTION ARCELORMITTAL DOFASCO CLAIMS MANAGEMENT POLICY This general claims policy covers light flat rolled sheet products produced at all ArcelorMittal Dofasco flat rolled
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationAppendice Caratteristiche Dettagliate dei Materiali Utilizzati
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,
More informationStandard Specification for Stainless Steel Bars and Shapes 1
Designation: A 276 06 Standard Specification for Stainless Steel Bars and Shapes 1 This standard is issued under the fixed designation A 276; the number immediately following the designation indicates
More informationA. Double lock standing seam, single element, metal roof panels.
Specifiers: Click on the icon in the WORD toolbar to reveal detailed instructions SECTION 07 41 13 METAL ROOF PANELS Morin Metal Panels Double Lock Standing Seam Metal Roof Panels PART 1 - GENERAL 1.1
More informationEffects of Sulfur Level and Anisotropy of Sulfide Inclusions on Tensile, Impact, and Fatigue Properties of SAE 4140 Steel
Paper 28-1-434 Effects of Sulfur Level and Anisotropy of Sulfide Inclusions on Tensile, Impact, and Fatigue Properties of SAE 414 Steel Copyright 28 SAE International Nisha Cyril and Ali Fatemi The University
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 304 (S30400)/ EN 1.4301 304L (S30403) / EN 1.4307 304H (S30409) Introduction: Types 304, 304L and 304H are the most versatile and widely
More informationSECTION 07720 PREFORMED METAL STANDING SEAM ROOFING
SECTION 07720 PREFORMED METAL STANDING SEAM ROOFING PART ONE GENERAL DESCRIPTION This section includes pre-formed standing seam metal roofing and related flashings, closures, trim and accessories including,
More informationJIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes
JIS G3472 Electric Resistance Welded Carbon Steel Tubes for Automobile Structural Purposes 1. Scope This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes, hereinafter
More informationWeld Cracking. An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction. The James F. Lincoln Arc Welding Foundation
Weld Cracking An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction The James F. Lincoln Arc Welding Foundation Weld Cracking Several types of discontinuities may occur in welds
More informationDRAFTING. Prepared by:
GTRI MACHINE SERVICES DRAFTING STANDARDS Prepared by: Machine Services Department Georgia Tech Research Institute December 16, 2011 Copyright 2011 Georgia Tech Research Corporation. Alll rights reserved.
More information2.3. Continuous Hot-Dip Galvanizing versus General (Batch) Galvanizing Rev 1.0 Jan 2011. GalvInfoNote. Introduction. Continuous Galvanizing
2. Coating Processes and Surface Treatments GalvInfoNote 2.3 Introduction Continuous Hot-Dip Galvanizing versus General (Batch) Galvanizing There are two different processes for applying a zinc coating
More informationMATERIAL SPECIFICATIONS CATALOGUE
MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationS355 European Standard Steel
1(7) S European Standard Steel S EN 10025 : 2004 Standard Plate S structural steel plate is a highstrength lowalloy European standard structural steel covering four of the six "Parts" within the EN 10025
More informationNucor VR16 II TM Vertical Rib Standing Seam Roof System
Nucor VR16 II TM Vertical Rib Standing Seam Ro System www.nucorbuildingsystems.com Nucor VR16 II Vertical Rib Standing Seam Ro Perfect for the Marketplace The Nucor Building Systems VR16 II Ro Panel is
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationSTRUCTURAL WELDED WIRE REINFORCEMENT
STRUCTURAL WELDED WIRE REINFORCEMENT 2 1 WIRE REINFORCEMENT INSTITUTE, INC. Excellence Set in Concrete www.wirereinforcementinstitute.org Manual of Standard Practice Structural Welded Wire Reinforcement
More informationHoliday Inn Express & Suites Covington (Newton County) 1. Standing-seam metal roofing, custom fabricated.
PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standing-seam metal roofing, custom fabricated. 1.2 SUBMITTALS A. Product Data: For each type of product indicated. B. Shop Drawings: Show installation
More informationWeek 2: Steel. Steel Topics. Introduction to Iron and Steel. Introduction to Iron and Steel. A Selection of Mechanical Properties (from Gordon (1979))
Week 2: Steel Mostly an overview of Chapter 3, M&Z CEE 363 Construction Materials Steel Topics Introduction to iron and steel Types of steel used in construction Steel production Iron-carbon phase diagram
More informationPerfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com
Perfection Spring & Stamping Corp. 1449 E. Algonquin Rd. Mount Prospect, IL 60056 USA www.pss-corp.com 411@pss-corp.com Raw Material Type, Alloy, & Finishes By Manufacturing Method 1. Punch Press Department
More informationLEGACY REPORT ER-5110. www.icc-es.org. ICC Evaluation Service, Inc. Reissued November 1, 2003. Legacy report on the 1997 Uniform Building Code
LEGACY REPORT Reissued November 1, 2003 ICC Evaluation Service, Inc. www.icc-es.org Business/Regional Office # 5360 Workman Mill Road, Whittier, California 90601 # (562) 699-0543 Regional Office # 900
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationDurcomet 100 CD4MCuN. Bulletin A/7l
Durcomet 100 CD4MCuN Bulletin A/7l Durcomet 100 Introduction Durcomet 100 is a duplex stainless steel produced to ASTM specification A995 or A890, Grade CD4MCuN (1B). It is indicated by the Flowserve casting
More informationSteel Reinforcing Bars for the Reinforcement of Concrete
Construction Standard CS2:2012 Steel Reinforcing Bars for the Reinforcement of Concrete 香 港 特 別 行 政 區 政 府 The Government of the Hong Kong Special Administrative Region The Government of the Hong Kong Special
More informationSECTION 07400 STANDING SEAM METAL ROOF
SECTION 07400 STANDING SEAM METAL ROOF PART 1 - GENERAL 1.01 SECTION INCLUDES A. Work described in this section includes pre-formed standing seam metal roofing system complete with clips, perimeter and
More informationPART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
More informationReproduced with the permission of the American Welding Society (AWS), Miami, Florida - 09/15/2011. 7. Stud Welding
7. Stud Welding 7.1 Scope Section 7 contains general requirements for welding steel studs to steel (see 7.2.7 and 1.2.2 for approved steels). In addition, it stipulates specific requirements for the following:
More informationMEGA 02 Fourth edition - March 2010 Document No. VP117-00-M-01-02
MEGA 02 Fourth edition - March 2010 Document No. VP117-00-M-01-02 The information contained in this manual is subject to change without notification. Changes will be posted in the electronic version of
More informationDIN 2391-81 Part II SEAMLESS PRECISION STEEL TUBES
DIN 91-81 Part II SEAMLESS PREISION STEEL TUBES 1.Field of application This defines the technical delivery conditions for seamless precision steel tubes according to DIN 91 Part 1 which are made from the
More informationDENVER MODEL 30 X 30 SPECIFICATIONS
DENVER MODEL 30 X 30 SPECIFICATIONS Dimensions: Roof Dimensions 30-0 x 30-0 (4) Columns (Center to Center) 25-6½ x 25-6½ Minimum Clearance 8-0 Roof Height @ Peak Dependent on Col. Ht. Hip Roof 4:12 pitch
More informationQuality Regulations for Profiles
Quality Regulations for Profiles September 2010 Quality Regulations for Profiles Page 2/42 Contents Preface... 4 1. Terms and Definitions... 5 1.1 Third parties... 5 1.2 Independent laboratories... 5 1.3
More informationThyssenKrupp Rasselstein
Quality begins with ThyssenKrupp Rasselstein Product Range ThyssenKrupp Rasselstein Your Quality Partner Page 2 ThyssenKrupp Rasselstein Product Range Quality begins with ThyssenKrupp Rasselstein ThyssenKrupp
More informationALLOY 7475 PLATE AND SHEET HIGHEST TOUGHNESS/STRENGTH
ALCOA MILL PRODUCTS ALLOY 7475 PLATE AND SHEET HIGHEST TOUGHNESS/STRENGTH ALLOY 7475 DESCRIPTION Alloy 7475 is a controlled toughness alloy developed by Alcoa for sheet and plate applications that require
More informationSTRENGTH AND DUCTILITY OF WELDED JOINTS SUBJECTED TO OUT OF PLANE BENDING
STRENGTH AND DUCTILITY OF WELDED JOINTS SUBJECTED TO OUT OF PLANE BENDING by Ivan Gomez Amit Kanvinde University of California, Davis Yu Kay Kwan Gilbert Grondin University of Alberta Final Report Presented
More informationChapter 8. Flexural Analysis of T-Beams
Chapter 8. Flexural Analysis of T-s 8.1. Reading Assignments Text Chapter 3.7; ACI 318, Section 8.10. 8.2. Occurrence and Configuration of T-s Common construction type.- used in conjunction with either
More informationSheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
More informationPAAM COMMERCIAL PRIVATE LIMITED
METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal
More informationLIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D.
LIFTING WIRE FOR HOT-DIP GALVANIZING BY THOMAS LANGILL, Ph.D. INTRODUCTION The purpose of the American Galvanizers Association s wire study was to determine the working load limit for support wire that
More informationMaterial data sheet. EOS MaragingSteel MS1. Description
EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS
More informationFence SpecCheck Wheatland Tube Company 800 343 0124
Fence SpecCheck Wheatland Tube Company 800 343 0124 www.wheatland.com ASTM Specifications (May 2014) www.astm.org A53/A53M-12 Schedule 40 & 80 Pipe: Specification for Pipe, Steel, Black and Hot- Dipped,
More informationB.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN
No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationADHESIVE BONDING PERFORMANCE OF GA COATED 590 MPa TENSILE STRENGTH STEELS
ADHESIVE BONDING PERFORMANCE OF GA COATED 590 MPa TENSILE STRENGTH STEELS Susan Wolf ArcelorMittal Global R&D East Chicago Acknowledgements Chann Cheng, Benda Yan, Jayanth Chintamani, ArcelorMittal Global
More informationComparison of the Mechanical Properties of Steel and Ductile Iron Pipe Materials
1301 Comparison of the Mechanical Properties of Steel and Ductile Iron Pipe Materials Brent Keil 1, Jack Devletian 2 ABSTRACT Water infrastructure engineers commonly evaluate a variety of pipe materials
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationHot rolled products of structural steels
BRITISH STANDARD BS EN 10025-6:2004 +A1:2009 Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and
More informationADDA FERreport JANUARY 2015
ADDA FERreport JANUARY 2015 REPORT 2015 PREVIEW COMPLETE TUBE MILL TM8 FOR VIETNAM FABTECH & METAL EXPO 2014 JANUARY 2015 2015 PREVIEW The year 2014 has closed in a positive way for Adda Fer Meccanica,
More informationDX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationStress Strain Relationships
Stress Strain Relationships Tensile Testing One basic ingredient in the study of the mechanics of deformable bodies is the resistive properties of materials. These properties relate the stresses to the
More informationSheet Metal Shearing & Bending
Training Objective After watching the program and reviewing this printed material, the viewer will gain a knowledge and understanding of the principles and machine methods of shearing and bending sheetmetal
More informationChapter - 3 Design of Rectangular Beams and One-way Slabs
Rectangular Beams and One-way Slabs Page 1 of 9 Chapter - 3 Design of Rectangular Beams and One-way Slabs 12 h A 12 strip in a simply supported one-way slab h b=12 L Rectangular Beams and One-way Slabs
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationManufacturing, Supply & Quality Plan for Tower Bolts. SL Tower Bolt Market Penetration
Manufacturing, Supply & Quality Plan for Tower Bolts Project: SL Tower Bolt Market Penetration Document History Version Date Original Document First Submission Feb 9, 2013 Rev1 Requested Revisions Comments
More informationStability. Security. Integrity.
Stability. Security. Integrity. PN #MBHPT Foundation Supportworks provides quality helical pile systems for both new construction and retrofit applications. 288 Helical Pile System About Foundation Supportworks
More informationP R O D U C T D A T A B U L L E T I N SELECTION OF ELECTRICAL STEELS FOR. Magnetic Cores
P R O D U C T D A T A B U L L E T I N SELECTION OF ELECTRICAL STEELS FOR Magnetic Cores 1 SELECTION OF ELECTRICAL STEELS FOR MAGNETIC CORES The information and data in this catalog are accurate to the
More informationA. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.
13310 FABRIC SHADE STRUCTURES FOR PLAYGROUND AREAS ************************************************************************************************************************ SPECIFIER: CSI Master Format
More informationATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationA transverse strip of the deck is assumed to support the truck axle loads. Shear and fatigue of the reinforcement need not be investigated.
Design Step 4 Design Step 4.1 DECK SLAB DESIGN In addition to designing the deck for dead and live loads at the strength limit state, the AASHTO-LRFD specifications require checking the deck for vehicular
More informationMaster Panel 1000 W Wall
Master Panel 1000 W Wall Product Description In order to generate an aesthethic outlook wall panels are generally produced as micro hedge. Besides, in connection points concealed screw is used which provides
More informationSAND CAST CHILL CAST LM4 - TF
1 This alloy conforms with British Standards 1490 and is similar to the obsolete specifications BS.L79 and D.T.D 424A. Castings may be in the cast (M) of fully heat treated (TF) conditions. CHEMICAL COMPOSITION
More informationThe Application of Multiphase Steel in the Body-in-White
The Application of Multiphase Steel in the Body-in-White Dr.-Ing. Markus Pfestorf BMW AG 1. Demands on materials 2. Functionality 3. Mechanical data of sheet materials 4. Material grade application 5.
More informationEdward D. Basta, Senior Metallurgical Engineer Atlas Steel Products Co. 7990 Bavaria Road Twinsburg, OH 44087 USA
Cost Reductions and Product Consistency Improvements Using Unannealed High- Frequency/Solid State (UHFSS) Welded 409 Stainless Steel Heat Exchanger Tubing BY Edward D. Basta, Senior Metallurgical Engineer
More informationSUGGESTED SPECIFICATION EXHAUST SYSTEM SILENCER, FLEX CONNECTOR, INSULATION BLANKETS, WALL / ROOF THIMBLES
SUGGESTED SPECIFICATION EXHAUST SYSTEM SILENCER, FLEX CONNECTOR, INSULATION BLANKETS, WALL / ROOF THIMBLES 4121 N.W. 37 th Street, Lincoln, NE 68524 Telephone (402) 470-2627 Fax (404) 470-2410 www.gtexhaust.com
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationLANDSCAPING AQUA SPORT. Rainwater treatment using filter substrate channel. DIBt approval applied for
CIVILS LANDSCAPING AQUA SPORT Drainfix Clean Rainwater treatment using filter substrate channel DIBt approval applied for CIVILS LANDSCAPING AQUA SPORT Drainfix Clean Application areas For the treatment
More informationInfluence of Steel Scrap on Microstructure and Mechanical Properties of Spheroidal Graphite Cast Iron
Materials Transactions, Vol. 44, No. 7 (2003) pp. 1419 to 1424 #2003 The Japan Institute of Metals Influence of Scrap on Microstructure and Mechanical Properties of Spheroidal Graphite Cast Iron Sadato
More informationMetal Building Systems Installation and Flashings & Details Guide. Table of Contents
Table of Contents Section Page Notes to Designer/User..................1-2 Map of Typical Roof Conditions............3 Fastener Placement.......................4 Fastener Selection........................5
More informationNOTCHES AND THEIR EFFECTS. Ali Fatemi - University of Toledo All Rights Reserved Chapter 7 Notches and Their Effects 1
NOTCHES AND THEIR EFFECTS Ali Fatemi - University of Toledo All Rights Reserved Chapter 7 Notches and Their Effects 1 CHAPTER OUTLINE Background Stress/Strain Concentrations S-N Approach for Notched Members
More informationMaster Panel 1000 R5 Roof
Master Panel 1000 R5 Roof Product Description The important feature of the roof elements are the easy installation procedure. The element fix exactly and pushed together without much force. Roof coverage
More informationFLOORS REINFORCEMENT Shear Stud Connector for steel- concrete composite structures cold applied by pins
www.tecnaria.com FLOORS REINFORCEMENT Shear Stud Connector for steel concrete composite structures cold applied by pins HIGHPERFORMANCE FLOORS COMPOSITE STEEL AND CONCRETE STRUCTURES: STATIC AND ECONOMIC
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-05 40 00 (May 2015) ------------------------ Preparing Activity: NAVFAC Superseding UFGS-05 40 00 (May 2010) UNIFIED FACILITIES GUIDE SPECIFICATIONS References are in
More information