The Application of Multiphase Steel in the Body-in-White

Size: px
Start display at page:

Download "The Application of Multiphase Steel in the Body-in-White"

Transcription

1 The Application of Multiphase Steel in the Body-in-White Dr.-Ing. Markus Pfestorf BMW AG

2 1. Demands on materials 2. Functionality 3. Mechanical data of sheet materials 4. Material grade application 5. Forming 6. Joining 7. Summary and outlook

3 Demands on Material Process and Product Forming Formability Punch force Forming limit diagram Cutting Cutting forces Spring back Joining Spot Welding Adhesive Bonding MIG welding MIG brazing Laser welding Riveting Surface/ Corrosion Class A surface Adhesive bonding Paint adhesion Contact corrosion Functionality Ductility during crash (R p0,2, R m, A 80, ) Fatigue strength E-Modulus (stiffness) Weight (density) Frequency attenuation Acoustics Process: Press-Shop Body-in-White Paint Product

4 BMW Functionality Parameters for Crash Performance BMW rear, 50 km/h, 40 % US-FMVSS 301, 80 km/h, 70 % - IIHS low speed, 8 km/h, others, AZT-front/rear, 15 km/h, 40% FMVSS 201 FMVSS 208 Roof hitting test Roll over EURO-NCAP, 64,4 km/h, 40 % US-NCAP, 56,3 km/h, 100% Pole (front), 50 km/h, middle JAPAN-NCAP, 55 km/h, 90 US-LINCAP, 62 km/h Pole (side), 29 km/h IIHS side, 50 km/h

5 Functionality Crash Testing (BMW 6 series coupé) Data for rear crash Car weight: 1978 kg Barrier weight: 1365 kg Barrier speed: 81,7 km/h Results: No impact of fuel tank No impact in passenger cabin No brittle fracture of trunk lid

6 Functionality Stiffness 32 Hz Torsion 29 29,8 28 Hz Bending 26 26,5 1. Torsion ,8 24,8 1. Bending ,6 21,8 E28 (1981) E34 (1988) E39 (1995) E60 (2003) f ~ c m E28 (1981) E34 (1988) E39 (1995) E60 (2003) Inflated scale

7 Functionality Stiffness Bending Torsion

8 Mechanical Data Sheet Steel Elongation at fracture A % deep drawing steel 6xxx (T4) IF 5xxx Stainless steel 6xxx (T6) TWIP-steel phosphorus alloyed steel Bake Hardening TRIP Micro alloyed DP Work hardened N/mm² 1400 CP MS Yield strength R p0,2

9 Mechanical Data Comparison: H400T H420LA Yield strength R p0, N mm² H400T (TRIP700) H420LA (ZSTE420) 0 0 0,1 0,2 0,3 0,4 Forming rate

10 Mechanical Data Work and Bake Hardening Effects Delivery values before forming Forming Work hardening Paint oven Bake hardening Final value of finished products 800 Yield strength Rp0,2 N mm² H300LA (Micro-alloyed) H300B (Bake-hardening steel) 0 H300X (Dual-phase steel) (Supplier data)

11 Material Grade Application Increasing Utilization of HS Steels BMW 3 Series (SOP 1997) BMW 7 Series (SOP 2001) BMW 5 Series (SOP 2003) BMW 3 Series (SOP 2004) Percentage of material (body in white incl. hang on parts) Deep Draw Steels 180 N/mm² N/mm² 260 N/mm² N/mm² N/mm² N/mm² > 900 N/mm² Plastics Others AlMg aluminum AlSi aluminum

12 BMW Material Grade Application Detailed Case Study: BMW 3 Series 180 N/mm² 19% Deep drawing steel 19% Others 1% >900 N/mm² 1% N/mm² 6% N/mm² 12% N/mm² 11% 260 N/mm² 9% N/mm² 22% Steel Other steel DC 03/04 DX 54 DX 56 H180B, H180Y H220B, H220Y H260B, H260Y, H260LA H300B, H300LA, H300X H340LA, H340X H400T H420LA D680C Docol1000 Plastics/others Plastics Others

13 Material grade application Impact load path at the BMW 3 series Load path for frontal impact Deformable front Rigid passenger cabin Load path for side impact Multi-phase steel grades

14 Material grade application Benefit of Multiphase steel Weight body in white Low strength steel < 180N/mm² 300 kg averaged min. yield strength: 178 N/mm² 45% 55% Previous 3 series weight: 284 kg, functionality 98 (size of new 3 series) High strength steel Multiphase steel 69% 31% New 3 series weight: 296 kg, functionality: % 42% 32% Averaged min. yield strength: 294 N/mm² New 3 series weight: 267 kg, functionality: 2004 Weight saving + 12 kg 0 1 Weight saving by multiphase steel and high strength steel: 29 kg - 17 kg

15 Forming Formability H420LA (ZStE 420) H400T (TRIP700) Severe risk of cracks Formable without cracks Rp0,2: N/mm² A80: > 17% Rp0,2: N/mm² A80: > 24%

16 Forming Spring Back and Buckling Spring back and buckling Steps to prevent spring back and buckling (required increase in package volume) Opening of the profile by a certain angle stiffening bead stiffening bead

17 Forming Deep Draw Tooling Considerations Conventional deep drawing tool material: GGG70 insert not essential not hardened interactive surface Deep drawing tool for TRIP 700 inserts essential CVD coated + hardened inserts cooling system increased stiffness

18 Joining Electrode Considerations Normal steel: 0 15 Multiphase steel: 0 t 5,5 mm 6-7 mm Multiphase steel: increase the diameter of the electrodes increase the electrode forces adaptation of the weldability range

19 Joining Adhesive Spot Welding Vibration test with H400T + Z100 (hot dip galvanized) N Amplitude 2000 k=4, ,0E+04 1,0E+05 1,0E+06 1,0E+07 Number of cycles

Great Automotive Designs Enabled By Advances in Adhesive Bonding

Great Automotive Designs Enabled By Advances in Adhesive Bonding Great Automotive Designs Enabled By Advances in Adhesive Bonding Mansour Mirdamadi and Greg Korchnak Dow Automotive Presentation Outline Classification of adhesive systems for body structure applications

More information

HIGH STRENGTH SHEET AND PLATE STEELS FOR OPTIMUM STRUCTURAL PERFORMANCE

HIGH STRENGTH SHEET AND PLATE STEELS FOR OPTIMUM STRUCTURAL PERFORMANCE HIGH STRENGTH SHEET AND PLATE STEELS FOR OPTIMUM STRUCTURAL PERFORMANCE Jan-Olof Sperle SSAB Tunnplåt AB, Borlänge, Sweden SUMMARY Modern quench and tempering as well as continuous annealing make it possible

More information

Innovative materials and solutions for automotive components

Innovative materials and solutions for automotive components Innovative materials and solutions for automotive components D Aiuto Fabio CRF GML Metals Department ANFIA 28 April, 2016 Index Material overview Material development Twip characterization Fiat Panda front

More information

w w w. a u t o s t e e l. o r g

w w w. a u t o s t e e l. o r g Great Designs in Steel is Sponsored by: AK Steel Corporation, ArcelorMittal Dofasco, ArcelorMittal USA, Nucor Corporation, Severstal North America and United States Steel Corporation LIGHTWEIGHTING AUTOMOTIVE

More information

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST

ALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,

More information

The Synergy TM Door A New Approach to Lightweight Steel Doors

The Synergy TM Door A New Approach to Lightweight Steel Doors The Synergy TM Door A New Approach to Lightweight Steel Doors Paul Schurter, Tim Lim, ArcelorMittal Mansour Mirdamadi, Dow Automotive Outline Background Approach Structural Performance Targets Synergy

More information

DX2202 Duplex stainless steel

DX2202 Duplex stainless steel Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5

More information

Flexible Rolling of Tailor Rolled Blanks - innovative light weight design in steel -

Flexible Rolling of Tailor Rolled Blanks - innovative light weight design in steel - Flexible Rolling of Tailor Rolled Blanks - innovative light weight design in steel - Dr.-Ing. Michael Rehse Muhr und Bender KG Tailor Rolled Blanks - a light weight design opportunity - Flexible Rolling

More information

NEXT GENERATION VEHICLE ENGINEERING GUIDELINES FOR STAINLESS STEEL IN AUTOMOTIVE APPLICATIONS

NEXT GENERATION VEHICLE ENGINEERING GUIDELINES FOR STAINLESS STEEL IN AUTOMOTIVE APPLICATIONS NEXT GENERATION VEHICLE ENGINEERING GUIDELINES FOR STAINLESS STEEL IN AUTOMOTIVE APPLICATIONS S. Schuberth 1, E. Schedin 2, T. Fröhlich 3, E. Ratte 1 1 ThyssenKrupp Nirosta GmbH, Germany, 2 Outokumpu Stainless

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon

More information

Application of Adhesives and Bonded Joint Design in Improving Vehicle Structure Performance

Application of Adhesives and Bonded Joint Design in Improving Vehicle Structure Performance Application of Adhesives and Bonded Joint Design in Improving Vehicle Structure Performance Mansour Mirdamadi Mustafa Ahmed Matt Turpin Alan Robinson Dow Automotive Presentation Outline Structural adhesives

More information

AISI O1 Cold work tool steel

AISI O1 Cold work tool steel T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

High Strength Aluminium Fasteners. 25.04.2006 G. Ross/R. Eul

High Strength Aluminium Fasteners. 25.04.2006 G. Ross/R. Eul High Strength Aluminium Fasteners 25.04.2006 G. Ross/R. Eul Content: TFS Key Facts Aluminium Fastener History Advantages & Benefits Applications Characteristics - Stress Corrosion Cracking - Fatigue Resistance

More information

R&D Services Knowledge transfer

R&D Services Knowledge transfer R&D Services Knowledge transfer Training Offer - November 2009 OCAS : a joint venture between ArcelorMittal and the Flemish Region R&D Knowledge transfer - Scope Market-oriented knowledge transfer in the

More information

ILV. Laser Welding: Line Scanners for Beam Shaping and Guiding. Alfred G. Arlt. Sulzbacher Str. 4 65824 Schwalbach/Taunus DIPL.-ING. ALFRED G.

ILV. Laser Welding: Line Scanners for Beam Shaping and Guiding. Alfred G. Arlt. Sulzbacher Str. 4 65824 Schwalbach/Taunus DIPL.-ING. ALFRED G. Laser Welding: Line Scanners for Beam Shaping and Guiding Alfred G. Arlt Ingenieurbüro für Lasertechnik +Verschleißschutz (ILV) Sulzbacher Str. 4 65824 Schwalbach/Taunus aga@ilv-arlt.de lt History of ILV:

More information

FINLAND. Lappeenranta. Helsinki. St.Petersburg. Oslo. Tallinn. Stockholm. Moscow. London Berlin

FINLAND. Lappeenranta. Helsinki. St.Petersburg. Oslo. Tallinn. Stockholm. Moscow. London Berlin FINLAND Oslo Stockholm Helsinki Lappeenranta St.Petersburg Tallinn Moscow London Berlin Lappeenranta Laser Processing Centre Partners Lappeenranta University of Technology, Laser Processing Laboratory,

More information

AUSTENITIC STAINLESS DAMASCENE STEEL

AUSTENITIC STAINLESS DAMASCENE STEEL AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel

More information

Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied

Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied Mechanical Properties of Metals Mechanical Properties refers to the behavior of material when external forces are applied Stress and strain fracture or engineering point of view: allows to predict the

More information

Lightweighting and steel technologies in the all-new 2016 Chevrolet Malibu 2017 Buick LaCrosse

Lightweighting and steel technologies in the all-new 2016 Chevrolet Malibu 2017 Buick LaCrosse Lightweighting and steel technologies in the all-new 2016 Chevrolet Malibu 2017 Buick LaCrosse v2 Terry A. Swartzell Underbody System Architect General Motors Company May 11, 2016 AGENDA The new sedans

More information

Structural Bonding for Lightweight Construction

Structural Bonding for Lightweight Construction Materials Science Forum Vols.618-619(2009) pp 49-56 Online at :http://www.scientific.net (2009)Trans Tech Publications, Switzerland Online available since 2009/Apr/17 Structural Bonding for Lightweight

More information

Objectives/Introduction Extraction of zinc Physical properties of zinc Zinc casting alloys Wrought zinc alloys Engineering design with zinc alloys

Objectives/Introduction Extraction of zinc Physical properties of zinc Zinc casting alloys Wrought zinc alloys Engineering design with zinc alloys Lecture 7 Zinc and its alloys Subjects of interest Objectives/Introduction Extraction of zinc Physical properties of zinc Zinc casting alloys Wrought zinc alloys Engineering design with zinc alloys Objectives

More information

Autogenous Laser Welding of Aluminum

Autogenous Laser Welding of Aluminum Hans Leidich OEM Laser Specialist Laser Technology Center TRUMPF Inc. Why Autogenous Simpler Less hardware Easier process Faster speed Should be first approach (if doesn t work, then go to the next step)

More information

Self-piercing riveting

Self-piercing riveting Self-piercing riveting Andre Stühmeyer, CAD-FEM GmbH Germany Self-piercing riveting Overview The self piercing riveting process FE analysis of the joining process Large deformation Material failure 2D

More information

Advanced Vehicle Structure Collision Repair Technologies

Advanced Vehicle Structure Collision Repair Technologies Advanced Vehicle Structure Collision Repair Technologies Steve Marks I-CAR Tech Centre Who Is I-CAR? Inter-Industry Conference On Auto Collision Repair - Not-For-Profit - Develop and Deliver Collision

More information

L I S A - Lightweight Structural Applications Based on Metallic and Organic foams

L I S A - Lightweight Structural Applications Based on Metallic and Organic foams L I S A - Lightweight Structural Applications Based on Metallic and Organic foams Project duration 2/2002-1/2005 European Commission, Fifth Framework Program GROWTH ; G5RD-CT-2001-00484 9 partners 1 LISA

More information

CH 6: Fatigue Failure Resulting from Variable Loading

CH 6: Fatigue Failure Resulting from Variable Loading CH 6: Fatigue Failure Resulting from Variable Loading Some machine elements are subjected to static loads and for such elements static failure theories are used to predict failure (yielding or fracture).

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,

More information

Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus

Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,

More information

Great Designs In Steel 2008

Great Designs In Steel 2008 Great Designs In Steel 2008 Advanced Vehicle Design and Advanced High Strength Steel Collision Repair Issues Steve Marks Industry Support Manager I-CAR Tech Centre What Is I-CAR? Inter-Industry Conference

More information

SuperLIGHT-CAR - the Multi-Material Car Body

SuperLIGHT-CAR - the Multi-Material Car Body SuperLIGHT-CAR - the Multi-Material Car Body Lutz Berger, Micha Lesemann, Christian Sahr Institut für Kraftfahrzeuge - RWTH Aachen University, Aachen, Germany Simon Hart, Richard Taylor ARUP, Solihull,

More information

RAMAX S Prehardened stainless holder steel

RAMAX S Prehardened stainless holder steel T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide

More information

SAMPLE TEST QUESTIONS MOTOR VEHICLE BODY REPAIRER- ITA WEBSITE

SAMPLE TEST QUESTIONS MOTOR VEHICLE BODY REPAIRER- ITA WEBSITE 1 How are spot welds located on the underside of an apron? A. Heat the undercoat with a torch. B. Visually inspects with a trouble light. C. Grind the surface with an angle grinder. D. Clean factory seams

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

Fatigue. 3. Final fracture (rough zone) 1. Fatigue origin. 2. Beach marks (velvety zone)

Fatigue. 3. Final fracture (rough zone) 1. Fatigue origin. 2. Beach marks (velvety zone) Fatigue Term fatigue introduced by Poncelet (France) 1839 progressive fracture is more descriptive 1. Minute crack at critical area of high local stress (geometric stress raiser, flaws, preexisting cracks)

More information

The Mechanical Properties of Glass

The Mechanical Properties of Glass The Mechanical Properties of Glass Theoretical strength, practical strength, fatigue, flaws, toughness, chemical processes Glass Engineering 150:312 Professor Richard Lehman Department of Ceramics and

More information

Structural Bonding of Lightweight Cars. Crash durable, safe and economical

Structural Bonding of Lightweight Cars. Crash durable, safe and economical Bonding of Lightweight Cars Crash durable, safe and economical Without the use of bonding technology, modern lightweight designs would hardly be feasible especially when it comes to bonding dissimilar

More information

Aluminium in Innovative Light-Weight Car Design*

Aluminium in Innovative Light-Weight Car Design* Materials Transactions, Vol. 52, No. 5 (2011) pp. 818 to 824 Special Issue on Aluminium Alloys 2010 #2011 The Japan Institute of Light Metals OVERVIEW Aluminium in Innovative Light-Weight Car Design* Jürgen

More information

Sheet metal operations - Bending and related processes

Sheet metal operations - Bending and related processes Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending

More information

TARIFF CODE and updates standard

TARIFF CODE and updates standard TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of

More information

Advanced High Strength Steel Technology in the 2006 Honda Civic

Advanced High Strength Steel Technology in the 2006 Honda Civic Advanced High Strength Steel Technology in the 2006 Honda Civic Creating Special Appeal with Steel Mark Pafumi Honda R&D Americas, Inc. I. Introduction II. Special Appeal III. DQR IV. Safety I. Introduction

More information

Body Structure Light-Weighting at Cadillac

Body Structure Light-Weighting at Cadillac Body Structure Light-Weighting at Cadillac Warren J. Parsons Engineering Group Manager Body Structures General Motors Company LAST YEAR--WHAT S AN ATS?? VEHICLE OVERVIEW ATS AWARDS AND ACCOLADES Popular

More information

BUMAX. REYHER your partner for the BUMAX range

BUMAX. REYHER your partner for the BUMAX range BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX

More information

PRELIMINARY BROCHURE. Uddeholm Corrax

PRELIMINARY BROCHURE. Uddeholm Corrax PRELIMINARY BROCHURE Uddeholm Corrax Uddeholm Corrax Uddeholm Corrax stainless moulds steel has a unique set of properties that makes it the ultimate choice in a large number of demanding applications.

More information

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech

Wear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat

More information

ALLOY 2205 DATA SHEET

ALLOY 2205 DATA SHEET ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,

More information

North American Stainless

North American Stainless Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,

More information

ThyssenKrupp Rasselstein

ThyssenKrupp Rasselstein Quality begins with ThyssenKrupp Rasselstein Product Range ThyssenKrupp Rasselstein Your Quality Partner Page 2 ThyssenKrupp Rasselstein Product Range Quality begins with ThyssenKrupp Rasselstein ThyssenKrupp

More information

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two

More information

Aluminum Metallurgy What Metal Finishers Should Know

Aluminum Metallurgy What Metal Finishers Should Know Help Log-in Site News Home About Us Services Publications Links Contact Us Accreditation Q & A Forums Print This Document Back again for installment #5 of the Omega Update! This past summer we began our

More information

How To Make A Lightweight Hot Stamping

How To Make A Lightweight Hot Stamping Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator

More information

LightCab Technology concept International Panel, SAE Congress 2013, 8 th October 2013. Jörg Ohlsen, CEO EDAG

LightCab Technology concept International Panel, SAE Congress 2013, 8 th October 2013. Jörg Ohlsen, CEO EDAG LightCab Technology concept International Panel, SAE Congress 2013, 8 th October 2013 Jörg Ohlsen, CEO EDAG LightCab Technology concept 1 Drivers LightCab Challenges and conceptual formulation 2 Product

More information

Introduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2

Introduction. ε 1 θ=55 ε 2. Localized necking Because ν=0.5 in plasticity, ε 1 =-2ε 2 =-2ε 3. ε 3,ε 2 SHEET METALWORKING 1. Cutting Operation 2. Bending Operation 3. Drawing 4. Other Sheet-metal Forming 5. Dies and Presses 6. Sheet-metal Operation 7. Bending of Tube Stock 1 Introduction Cutting and forming

More information

UDDEHOLM VANADIS 30 SUPERCLEAN

UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on

More information

Abaqus Technology Brief. Automobile Roof Crush Analysis with Abaqus

Abaqus Technology Brief. Automobile Roof Crush Analysis with Abaqus Abaqus Technology Brief Automobile Roof Crush Analysis with Abaqus TB-06-RCA-1 Revised: April 2007. Summary The National Highway Traffic Safety Administration (NHTSA) mandates the use of certain test procedures

More information

G1RT-CT-2001-05071 D. EXAMPLES F. GUTIÉRREZ-SOLANA S. CICERO J.A. ALVAREZ R. LACALLE W P 6: TRAINING & EDUCATION

G1RT-CT-2001-05071 D. EXAMPLES F. GUTIÉRREZ-SOLANA S. CICERO J.A. ALVAREZ R. LACALLE W P 6: TRAINING & EDUCATION D. EXAMPLES 316 WORKED EXAMPLE I Infinite Plate under fatigue Introduction and Objectives Data Analysis 317 INTRODUCTION AND OBJECTIVES One structural component of big dimensions is subjected to variable

More information

PRELIMINARY BROCHURE. Uddeholm Ramax HH

PRELIMINARY BROCHURE. Uddeholm Ramax HH PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.

More information

NVH TECHNOLOGY IN THE BMW 1 SERIES

NVH TECHNOLOGY IN THE BMW 1 SERIES NVH TECHNOLOGY IN THE BMW 1 SERIES (Presented by) A. Fleszar LMS Americas J. Florentin, F. Durieux LMS International T. Yamamoto, Y. Kuriyama Nippon Steel Corporation CONTENTS Introduction Hybrid Interior

More information

Aluminized Steel Type 1 STAINLESS 409 and 439

Aluminized Steel Type 1 STAINLESS 409 and 439 P R O D U C T D A T A B U L L E T I N Aluminized Steel Type 1 STAINLESS and Excellent Resistance to Pitting Corrosion from Road Salt Excellent Resistance to Muffler Condensate Corrosion Red Rust Protection

More information

CATHODIC PROTECTION SYSTEM DESIGN

CATHODIC PROTECTION SYSTEM DESIGN CATHODIC PROTECTION SYSTEM DESIGN Presented By DENIS L ROSSI P.E. CORROSION ENGINEER New England C P Inc. Corrosion Fundamentals What is corrosion? It is defined as the degradation or deterioration of

More information

X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.

X15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE. TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

Flex Circuit Design and Manufacture.

Flex Circuit Design and Manufacture. Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit

More information

MODIFICATION OF FLD EVALUATION FOR ULTRA HIGH-STRENGTH STEELS AS A RESULT OF USING CONTACT-LESS SYSTEMS FOR MEASURING DEFORMATION

MODIFICATION OF FLD EVALUATION FOR ULTRA HIGH-STRENGTH STEELS AS A RESULT OF USING CONTACT-LESS SYSTEMS FOR MEASURING DEFORMATION MODIFICATION OF FLD EVALUATION FOR ULTRA HIGH-STRENGTH STEELS AS A RESULT OF USING CONTACT-LESS SYSTEMS FOR MEASURING DEFORMATION Abstract Jiří SOBOTKA a, Pavel DOUBEK a, Michaela KOLNEROVÁ a, Pavel SOLFRONK

More information

COATED CARBIDE. TiN. Al 2 O 3

COATED CARBIDE. TiN. Al 2 O 3 COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =

More information

A COMPARISON OF AC TO INVERTER DC RESISTANCE SPOT WELDING AND THE EFFECTS ON DUAL-PHASE 600

A COMPARISON OF AC TO INVERTER DC RESISTANCE SPOT WELDING AND THE EFFECTS ON DUAL-PHASE 600 A COMPARISON OF AC TO INVERTER DC RESISTANCE SPOT WELDING AND THE EFFECTS ON DUAL-PHASE 600 Kurt Hofman, Mike Soter, Charles Orsette, Shawn Villaire, and Matt Prokator RoMan Engineering Services Inc. Abstract

More information

Anodizing Reference Guide

Anodizing Reference Guide Anodizing Reference Guide Type Thickness Type II Conventional coatings produced 1.8µ-25.4µ from sulfuric acid bath Type I A Conventional coatings produced 0.5µ-7.6µ (microns) from chromic acid bath Type

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,

More information

Edward D. Basta, Senior Metallurgical Engineer Atlas Steel Products Co. 7990 Bavaria Road Twinsburg, OH 44087 USA

Edward D. Basta, Senior Metallurgical Engineer Atlas Steel Products Co. 7990 Bavaria Road Twinsburg, OH 44087 USA Cost Reductions and Product Consistency Improvements Using Unannealed High- Frequency/Solid State (UHFSS) Welded 409 Stainless Steel Heat Exchanger Tubing BY Edward D. Basta, Senior Metallurgical Engineer

More information

Commercial vehicle industry. Your partner for innovative solutions. voestalpine Steel Division www.voestalpine.com/steel

Commercial vehicle industry. Your partner for innovative solutions. voestalpine Steel Division www.voestalpine.com/steel Commercial vehicle industry Your partner for innovative solutions Carina Baumgartner, Customer service voestalpine Steel Division www.voestalpine.com/steel Through years of experience and future-oriented

More information

Fatigue Performance Evaluation of Forged Steel versus Ductile Cast Iron Crankshaft: A Comparative Study (EXECUTIVE SUMMARY)

Fatigue Performance Evaluation of Forged Steel versus Ductile Cast Iron Crankshaft: A Comparative Study (EXECUTIVE SUMMARY) Fatigue Performance Evaluation of Forged Steel versus Ductile Cast Iron Crankshaft: A Comparative Study (EXECUTIVE SUMMARY) Ali Fatemi, Jonathan Williams and Farzin Montazersadgh Professor and Graduate

More information

Chapter 5 - Aircraft Welding

Chapter 5 - Aircraft Welding Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced

More information

GUARDRAIL POST STEEL

GUARDRAIL POST STEEL GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating

More information

Stress Strain Relationships

Stress Strain Relationships Stress Strain Relationships Tensile Testing One basic ingredient in the study of the mechanics of deformable bodies is the resistive properties of materials. These properties relate the stresses to the

More information

Material data sheet. EOS Aluminium AlSi10Mg. Description

Material data sheet. EOS Aluminium AlSi10Mg. Description EOS Aluminium AlSi10Mg EOS Aluminium AlSi10Mg is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data

More information

THREAD-FORMING SCREWS CUT COSTS WITH DIRECT FASTENING

THREAD-FORMING SCREWS CUT COSTS WITH DIRECT FASTENING RIBE Th r e a d-fo r m i n g Sc r e w s Di r e c t Fa s t e n i n g in St e e l, Cas t Ir o n, Al u m i n u m, Sh e e t Me t a l, Ma g n e s i u m an d Plastic THREAD-FORMING SCREWS CUT COSTS WITH DIRECT

More information

An Upper Casing for an Automobile Steering Column

An Upper Casing for an Automobile Steering Column TALAT Lecture 2102.02 An Upper Casing for an Automobile Steering Column 15 pages, 16 figures Basic Level prepared by Steinar Skog and Kolstein Asbøll, Raufoss A/S, Raufoss and by Skanminium, Oslo Objectives:

More information

FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER

FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER NUBIRA/LACETTI FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER 6 1 SECTION 6 FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER CONTENTS 1. FRAME DOOR OPENING........................................... 6 2 1.1.GENERAL

More information

Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX

Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These

More information

Copper Alloys for Injection, Thermoform and Blow Molds

Copper Alloys for Injection, Thermoform and Blow Molds Copper Alloys for Injection, Thermoform and Blow Molds by Robert Kusner Manager of Technical Services June 2015 Today s Agenda History of copper mold alloys Why use copper? Which copper alloy should I

More information

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth

Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing

More information

HJK CONSULTING ENGINEERS. Project Management Technology Operating Consulting Excellence

HJK CONSULTING ENGINEERS. Project Management Technology Operating Consulting Excellence HJK CONSULTING ENGINEERS Project Management Technology Operating Consulting Excellence COLD ROLLING MILL EQUIPMENT HJK Consulting Engineers is supporting its client in sales of the following southern Europe

More information

Material data sheet. EOS MaragingSteel MS1. Description

Material data sheet. EOS MaragingSteel MS1. Description EOS MaragingSteel MS1 EOS MaragingSteel MS1 is a steel powder which has been optimized especially for processing on EOSINT M systems. This document provides information and data for parts built using EOS

More information

Material data sheet. EOS CobaltChrome MP1. Description

Material data sheet. EOS CobaltChrome MP1. Description EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a cobalt-chrome-molybdenum-based superalloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information

More information

Bolting Galvanized Steel

Bolting Galvanized Steel Bolting Galvanized Steel This chapter gives information on the characteristics, advantages and economics of bolted galvanized structures and zinc coated fasteners, and offers comment on bolting procedures

More information

Solution for Homework #1

Solution for Homework #1 Solution for Homework #1 Chapter 2: Multiple Choice Questions (2.5, 2.6, 2.8, 2.11) 2.5 Which of the following bond types are classified as primary bonds (more than one)? (a) covalent bonding, (b) hydrogen

More information

WJM Technologies excellence in material joining

WJM Technologies excellence in material joining Girish P. Kelkar, Ph.D. (562) 743-7576 girish@welding-consultant.com www.welding-consultant.com Weld Cracks An Engineer s Worst Nightmare There are a variety of physical defects such as undercut, insufficient

More information

different levels, also called repeated, alternating, or fluctuating stresses.

different levels, also called repeated, alternating, or fluctuating stresses. Fatigue and Dynamic Loading 1 Fti Fatigue fil failure: 2 Static ti conditions : loads are applied gradually, to give sufficient i time for the strain to fully develop. Variable conditions : stresses vary

More information

Award winning problem solvers UDDEHOLM STEEL FOR POWDER COMPACTING

Award winning problem solvers UDDEHOLM STEEL FOR POWDER COMPACTING Award winning problem solvers UDDEHOLM STEEL FOR POWDER COMPACTING Keep on going! The life of your tool is crucial in powder compacting processes. With Uddeholm Steel for Powder Compacting, you can increase

More information

Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)

Welding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E) Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.

More information

NOTCHES AND THEIR EFFECTS. Ali Fatemi - University of Toledo All Rights Reserved Chapter 7 Notches and Their Effects 1

NOTCHES AND THEIR EFFECTS. Ali Fatemi - University of Toledo All Rights Reserved Chapter 7 Notches and Their Effects 1 NOTCHES AND THEIR EFFECTS Ali Fatemi - University of Toledo All Rights Reserved Chapter 7 Notches and Their Effects 1 CHAPTER OUTLINE Background Stress/Strain Concentrations S-N Approach for Notched Members

More information

ME349 Engineering Design Projects

ME349 Engineering Design Projects ME349 Engineering Design Projects Introduction to Materials Selection The Material Selection Problem Design of an engineering component involves three interrelated problems: (i) selecting a material, (ii)

More information

Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1

Section 21. Telecommunication Hardware. www.geindustrial.com BuyLog Catalog 21-1 Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader

More information

Conceptual Design of Buildings (Course unit code 1C2)

Conceptual Design of Buildings (Course unit code 1C2) (Course unit code 1C2) Module C Design of Steel Members J.P. Jaspart (University of Liège) 520121-1-2011-1-CZ-ERA MUNDUS-EMMC Bolts are the main type of fasteners used in steel joints. The main geometrical

More information

Bending, Forming and Flexing Printed Circuits

Bending, Forming and Flexing Printed Circuits Bending, Forming and Flexing Printed Circuits John Coonrod Rogers Corporation Introduction: In the printed circuit board industry there are generally two main types of circuit boards; there are rigid printed

More information