GUIDE TO MOTORIZED CONTROLS. All the information you need to understand and sell this exciting upgrade.

Transcription

1 GUIDE TO MOTORIZED CONTROLS All the information you need to understand and sell this exciting upgrade. 1

2 POWERED FOR A WHOLE NEW POINT OF VIEW How can you increase your profit on every job without selling one more blind or shade? Add a motor. Whether your business focus is residential or light commercial, motorized window treatments offer benefits everyone can appreciate. Your customers will be delighted to learn that they can conveniently control individual or multiple shades from anywhere in the home or office with a simple touch of a button. Shades that are out-of-reach or simply too large to operate manually offer prime opportunities to add motorization. With home automation systems rapidly becoming more affordable, consumers are more willing than ever to motorize all their blinds and shades. Consumers will also appreciate the improved safety of a product without accessible operating cords. Eliminating the cords or chains enhances the view to the outside and creates a clean, uncluttered look ideally suited to both homes and businesses. Our motors are quiet, reliable and compact, fitting within the headrail system so your customers will see only their beautiful window treatments. YOUR ASSURANCE OF QUALITY For 75 years, Graber has been custom crafting premium window treatments. Graber window treatments are backed by a limited lifetime warranty and the resources of our experienced customer service team. MOTORIZATION WARRANTY Motorization components and accessories have a five-year limited warranty, excluding batteries.

3 CONTENTS GLOSSARY OF MOTORIZATION TERMS 5 KEY RESIDENTIAL MOTORIZATION BENEFITS 6 ADDITIONAL MOTORIZATION BENEFITS 7 MOTOR SELECTION AND SIZE CONSIDERATIONS 8 RF CONTROL SELECTION 10 OPERATION AND ADJUSTING LIMITS 11 ADDING AND DELETING RF CONTROLS 14 CREATING A GROUP 15 PAIRING THE RF CONTROL TO MOTORIZED SHADE 16 MOTOR PROGRAMMING AND RESET PROCEDURE 18 PROGRAMMING LIMITS 24 POWER OPTIONS 25 TECHNICAL SUPPORT CONTACT INFORMATION BACK 3

4 MOTORIZATION TIPS OF THE TRADE When you are discussing the reasons a client should motorize their shades and blinds, consider the trend toward automating other household systems. From programmable thermostats to security systems all the way to whole-home automation systems, consumers are moving toward simplifying and automating household control. Give your clients the opportunity to future-proof their investment in blinds and shades by choosing to motorize with Somfy radio frequency controlled motors. 4 Visit graberblinds.com to view motorized control How To videos.

5 GLOSSARY OF MOTORIZATION TERMS Battery Tube A motor power source; tube(s) that house the necessary AA lithium batteries to power shades and blinds. Control A handheld or wall-mounted RF control, timer, or integration device that operates the motor. Direct Wire Wires hidden behind walls that connect motor to power source. Dual Power Cut A timed 2 second 10 second 2 second disconnect and reconnect power cut sequence used to get movement or a jog on a 120V motor. Hard Wire 120VAC power wired directly to the motor from power source. All wiring must be installed per local code. Infrared (IR) A wireless remote control medium that uses the infrared light spectrum to send communications. Only works within line of sight. This technology is not preferred, and has been obsoleted from our offering. Jog A short up and down movement of a blind or shade. Line Voltage AC Home or building voltage, typically 110/115/120V, used to power larger interior and exterior solar shade motors. Low Voltage 12VDC or 24VDC used to power most RTS motors for residential applications. "MY" button Located on the handheld remote controls, this acts as a stop button when the window covering is in motion. When the window covering is stationary, the "MY" button brings it to the programmed favorite position. Programming Button A pin-sized, recessed button on Somfy motors and controls that assists with programming Programming Tool A paper clip, toothpick, or small screwdriver used to access the recessed programming button on Somfy motors or controls. Radio Technology Somfy (RTS) Somfy s proprietary RF protocol (language) for communicating between Somfy devices. This is the recommended technology for motorized blinds and shades. Reset Button A pin-sized button on motors, used to assist with programming or reset a motor that has 'locked up' from an RF communication standpoint. Reset Tool A special tool with button that needs to be plugged into previous version motor on Cellular/Pleated shades to reset a motor. (Motors manufactured after October 15, 2013 will no longer need the reset tool. The manufacturing date can be found on the Somfy sticker. An example is: DC 15 Oct 2013). "STOP" button Located on the wireless wall switches, this stops a window covering in motion. When the window covering is stationary, the "STOP" button brings it to the programmed favorite position. Transformer A motor power source that converts AC line voltage to DC low voltage. 5

6 KEY RESIDENTIAL MOTORIZATION BENEFITS CONVENIENCE Easy to operate hard-to-reach and wide window coverings Control multiple window coverings at once with the simple touch of a button Multiple control options to fit a variety of lifestyles: wall switches, remote controls, and timers Perfect addition to any current or future home automation system Great accessibility solution SAFETY AND SECURITY A safer alternative to accessible cords that are traditionally used to operate window coverings; ideal for homes with children and pets Use automatic timers to control window coverings at night or while away for added security STYLE No messy cords to detract from the beauty of the blind or shade Smooth and quiet operation to set the perfect mood without distraction The latest trend to revolutionize the home since automated garage doors; perfect for tech savvy early adopters MOTORIZATION TIPS OF THE TRADE Building an effective value proposition in the eyes of the client requires product and application knowledge that establishes you as the expert. 6 Visit graberblinds.com to view motorized control How To videos.

7 ADDITIONAL MOTORIZATION BENEFITS Performance long lasting, high quality components Reduced energy costs by controlling heat gain/loss Save time up to two weeks (75 hours) per year (based on operating four shades up and down 300 days per year) Integration with home automation systems now or in the future "Cool" factor leader in technology Compliant with new and emerging safety standards (ANSI) Automatic program shades to maximize energy efficiency, comfort, security, and protection of interior furnishings Multiple control options available hand-held remotes, wall switches, timers, sensors, or home automation integration devices Long battery life* one to two years Quiet operation * Will vary based on size and usage. If the motor begins to run noticeably slower, it is time to change the batteries. MOTORIZATION TIPS OF THE TRADE Successful selling depends on consistently delivering a powerful value proposition. 7

8 MOTOR SELECTION The table below lists the various motor options available. We recommend Radio Frequency (RF) for virtually all applications. Cellular and Pleated Shades Aluminum, Wood, Vinyl and Composite Blinds (excludes 1") Roller and Solar Shades Natural Shades Exterior Solar Shades Soft Roman Shades Motor Type Lift Motor Tilt Only Motor Lift Motor Lift Motor Lift Motor Lift Motor Radio Frequency (RF) Yes Yes Yes Yes Yes Yes RF Control options Hand-held remote Wall switch Timer Sun sensor Automation interface Hand-held remote Wall switch Timer Sun sensor Automation interface Hand-held remote Wall switch Timer Sun sensor Automation interface Hand-held remote Wall switch Timer Sun sensor Automation interface Hand-held remote Wall switch Timer Automation interface Wind Sensor Hand-held remote Wall switch Timer Sun sensor Automation interface Voltage Available 12-Volt 12-Volt 12-Volt 24-Volt 120-Volt 12-Volt 120-Volt 12-Volt 24-Volt Power Source Options Battery tube Solar power kit Plug-in transformer Multi-motor (8) power supply Battery tube Solar power kit Plug-in transformer Multi-motor (10) power supply 12-volt motor Battery tube Solar power kit Plug-in transformer Multi-motor (10) power supply 24-volt Quiet motor Plug-in transformer Multi-motor (5 or 10) power supply 120-volt Quiet motor Direct wire ("J"-box) 3-prong plug/ outlet Battery tube Solar power kit Plug-in transformer Multi-motor (10) power supply 120-volt Quiet motor Direct wire ("J"-box) 3-prong plug/outlet 12-volt motor Battery tube Solar power kit Plug-in transformer Multi-motor (10) power supply 24-volt Quiet motor Plug-in transformer Multi-motor (5 or 10) power supply 8 Visit graberblinds.com to view motorized control How To videos.

9 SIZE CONSIDERATIONS Be aware of the following limitations. Minimum Width* Max Width Min Height Max Height Multiple Shades on One Headrail Mounting Deduction for Inside Mount Cellular Shades (all fabric styles except blackout) Cellular Shades (blackout fabrics) 1" FashionPleat Pleated Shades 1" EvenPleat Pleated Shades 2" EvenPleat Pleated Shades Wood/Composite Blinds 29 1 /8" * 144" 9" 144" Yes 3 /8" 25 3 /8" * 86" 9" 96" Yes 3 /8" 25 1 /2" * 144" 9" 96" Yes 3 /8" 25 1 /2" * 120" 6" 96" Yes 3 /8" 27 3 /8" * 144" 12" 120" Yes 3 /8" 19" 96" 10" 120" ** Yes 1 /2" 2" Vinyl Blinds 19" 84" 9 3 /8" 108" ** Yes 1 /2" 2" Aluminum Blinds 19" 84" 9 3 /8" 126" ** Yes 1 /2" Natural Shades 18" 144" 10" ** Yes 3 /8" Roller and Solar Shades 12 Volt (RF) Roller and Solar Shades 24 Volt (RF) Roller and Solar Shades 120 Volt (Standard) Roller and Solar Shades 120 Volt (RF) Exterior Solar Shades 120 Volt (RF) Soft Roman Shades 12 & 24 Volt (RF) 16" ** 13" 144"! 1 /8" 20" ** 13" 144"! 1 /8" 23" ** 13" 204" No 1 /8" 24 1 /2" ** 13" 204" No 1 /8" 30 1 /2" ** 13" 144" No 1 /8" 24" 96" 18" 120" ** No 3 /8" * For smaller widths, see individual base price lists for size specification ** For maximum size, see Motorization Base Price List Based on Fabric Width Guide! Dual shade available 9

10 RF CONTROL SELECTION Graber motorized blinds and shades feature Somfy motors, controls, and accessories. The components described in this guide use Somfy's exclusive Radio Technology Somfy (RTS) radio frequency protocol. RTS enables you to select the right combination of controls to meet your customer's needs. Each motor can have a single control or multiple controls programmed to it. 5 channel remote Single channel wall switch 5 channel wall switch 16 channel remote Single channel remote Any Somfy RTS Motor Wind sensor for exterior shades ZRTSI-II Z-Wave Home Automation Interface Bridge Sun sensor Timer 10 Visit graberblinds.com to view motorized control How To videos.

11 MOTORIZED OPERATION Motorized shades (cellular, pleated, solar, roller, soft roman, and natural shades) feature lift operation: shade goes up and down. Motorized blinds (wood, composite, vinyl, and aluminum blinds) feature tilt operation: blind slats tilt forward and back. All motorized blinds and shades are pre-programmed from the factory with the upper and lower limits and the "MY" position set. (For blinds, full tilt back is upper limit and full tilt forward is lower limit). The following pages describe how changes can be made adding controls, changing motor direction, and, should it become necessary, how to reset a motor and remove all programming to start fresh. NOTE: Not all controls are fully described in this guide. Consult control-specific instructions or contact Customer Service for additional details.! Controls have been programmed by the manufacturer to operate the shade. The upper and lower limits and "MY" position have been set and should not need to be adjusted. If you are not satisfied with the default positions of your shade, adjustments can be made. UP Button "MY" button: Acts as a "STOP" button while shade is in motion. It can also be programmed as a quick way to bring shades to your preferred intermediate position. To program your control s "MY" button, refer to Setting Your "MY" Position on page 13. DOWN Button Channel Selector Button All four lights will illuminate when fifth channel is activated. Channel selected by pressing individual or multiple channel buttons. LED will illuminate when selected. 11

12 ADJUSTING YOUR SHADE'S DEFAULT UPPER LIMIT *PRODUCT SAFETY NOTE: When adjusting the upper position, over-winding can cause motor damage. If you would like to adjust your shade s default Upper limit: 1. Briefly press and release. Allow the shade to reach its default upper limit. 2. Once the shade stops, press and hold and simultaneously until the shade jogs. A jog is a short up-and-down movement of the shade. 3. Adjust your upper limit by pressing or to move your shade to your new desired upper limit.* The shade will only move while or is being pressed when in this adjustment mode. 4. When the shade is stopped at your new desired upper limit, press and hold the MY button until the shade jogs. You have reset the default upper limit. ADJUSTING YOUR SHADE'S DEFAULT LOWER LIMIT *PRODUCT SAFETY NOTE FOR SOLAR AND ROLLER: If you exceed the length of the material, the roller tube may become exposed. Should this happen, immediately push UP to correct. If your shade will not lower to your desired lower position, contact Customer Service. If you would like to adjust your shade s default lower limit: 1. Briefly press and release. Allow the shade to reach its default upper limit. 2. Once the shade stops, press and hold and simultaneously until the shade jogs. A jog is a short up-and-down movement of the shade. 3. Adjust your lower limit by pressing or to move your shade to your new desired lower limit.* The shade will only move while or is being pressed when in this adjustment mode. 4. When the shade is stopped at your new desired lower limit, press and hold the MY button until the shade jogs. You have reset the default lower limit. 12 Visit graberblinds.com to view motorized control How To videos.

13 ADJUSTING OR SETTING YOUR MY POSITION Your controls have been programmed by the manufacturer to operate your shade. The "MY" position has been set. If you are not satisfied with the default position of your shade, adjustments can be made. On the DecoFlex Wall Switch, the "STOP" button functions and programs the same as the "MY" button. 1. Using or, put your shade in motion. When it reaches your desired "MY" position, press and release "MY" to stop the shade. 2. Press and hold "MY" until the shade jogs. Your "MY" position is now set to your preferred intermediate position. NOTE: Send the shade to the intermediate position by pressing "STOP" or "MY" from any shade position. Shade should be stationary prior to activating intermediate position function. 13

14 ADDING AND DELETING RF CONTROLS In this sequence, you may copy and paste from one control to another or from one channel on a control to any other channel on the same control or a new one. 1. Start with the controller or channel that currently operates the shade. 2. To copy, use a paper clip or similar item to press and hold the programming button until the window covering jogs. Programming button If the wrong shade jogs, you have selected the wrong channel. Press the programming button you just pressed until the shade jogs again. Select the correct channel and start again from step 1. OR Programming button Do not press the programming button outside of this sequence unless otherwise instructed by a Customer Service agent. 3. Select the new control or channel. 4. To paste, use a paper clip or similar item to press and hold the programming button until the window covering jogs again. Now both the original and new control or channel operate the same shade. Deleting a control 1. Start with the control or channel you intend to keep and the shade currently operates. 2. Press and hold the programming button until the window covering jogs. 3. Select the control or channel you wish to delete. Individual control of same shade with multiple controls 4. Press and hold the programming button until the window covering jogs. The control or channel is now deleted and will not operate the window covering. 14 Visit graberblinds.com to view motorized control How To videos.

15 CREATING A GROUP Use the programming sequence below to control multiple window coverings with one control, also known as "creating a group." You will find it helpful to review the instructions on page 14 before moving on to this programming sequence. 1. Identify the window coverings you want to put into a group. Be sure that each window covering is operated on its own control or on its own channel and then identify the control or the channel you want to be in your group channel. 2. Select the control or the channel that operates the first shade you d like to program. Copy (see page 14, step 2). 3. Select the desired channel by momentarily pressing the channel selector button and Paste (see page 14, step 4). 4. Repeat the copy and paste sequence until all the shades you wish to have in the group have been pasted into the desired channel. Your original control or channel will continue to operate the window covering individually and the group channel will now control the window coverings in unison. Group control of multiple shades with the same control 15

16 PAIRING AN RF CONTROLLER TO THE WIREFREE MOTORIZED SHADE 1. Press and hold the program button until the shade jogs once. Locations of program buttons are based on the motor type. The various motor types are illustrated below. A. 12 Volt Solar/Roller, Woven Woods, Soft Shades Motor B. 24 Volt Solar/Roller, Soft Shades Motor C. Cellular/Pleated Motor Black motors produced prior to October 14, 2013 have a reset port on the end of the motor. Reset tool required to program and reset motor. D. Cellular/Pleated Motor E. NEW: Cellular/ Pleated Motor F. Horizontal Motor Black motors produced after October 15, 2013, have a programming button on the top of the motor. A reset tool is not required, a paper clip or similar item will assist in programming or resetting the motor. White motors have a programming button at the end of the motor. 16 Visit graberblinds.com to view motorized control How To videos.

17 2. Pairing mode is established when shade jogs once. (1) Jog Up/Down 3. Press and release programming button on the control you are adding until the shade jogs once. OR 4. Pairing is validated by a single jog. (1) Jog Up/Down NOTE: After initiating the first pairing step you will have 2 minutes before the motor times out to complete the sequence. See page 18 for 12-Volt Cellular and Pleated motor programming. See page 20 for 12-Volt Solar, Roller and Horizontal Tilt motor programming. See page 20 for 24-Volt Solar and Roller motor programming. See page 23 for 120-Volt Solar and Roller motor programming. 17

18 12-VOLT MOTOR PROGRAMMING AND RESET PROCEDURE Using the programming button or reset tool is only necessary if replacing a lost or damaged control, deleting controls, or in the rare case a motor loses ability to receive the RF signal properly ( locks up ). CELLULAR/PLEATED MOTORS (Some motors will require a reset tool.) 1. Identify the motor and locate the motor programming button. A B C Insert reset tool into connector on motor Program button = Program button locations = Programming tool a. A white motor will have a programming button located at the end of the motor, (see picture A). b. Black motors have two possible reset button locations. A motor may have a programming button located on top of the motor housing (see picture B) and a manufacturing date after October 15, A motor may have a reset port located at the end of the motor (see picture C) and a manufacturing date prior to October 14, A reset tool is required to program the motor. To add a new control when the original is lost or damaged (Pairing): NOTE: Programming a new control does not require disconnecting power to other shades. 1. Identify the motor and locate the motor programming button. 2. Using a programming tool (pictured A and B motors) press and hold the programming button until the blind/shade jogs one time. a. Insert a reset tool (pictured C motor) into the fitting and press and hold the program button for approximately 5 seconds. The red LED light blinks once, turns off, and then turns on again. Release the button and the shade will jog. Proceed to step 3 to add a new control. 18 Visit graberblinds.com to view motorized control How To videos.

19 3. Using a programming tool, press and release the programming button on the new control (remote or wall switch) until the blind/shade jogs one time. 4. All previous settings are maintained from the original control including upper and lower limits and intermediate position, if set. To delete all controls and maintain upper and lower limit settings: 1. Identify the motor and locate the programming button. 2. Using a programming tool (pictured A and B motors) press and hold the programming button until the blind/shade jogs two times. a. Insert a reset tool (pictured C motor) into the fitting and press and hold the reset tool program button for approximately 10 seconds. The red LED light blinks once, turns to a solid light, and then blinks again. Release the button and the shade will jog. Proceed to step All controls are erased and all previous settings are maintained from the original control including upper and lower limits and intermediate position, if set. Proceed to the pairing process (pages or previous section) to add a new control to the motor. To reset the motor and delete all previous settings: NOTE: Before resetting the motor, keep the target motor powered but disconnect all other motors from their power source. 1. Identify the motor and locate the programming button. 2. Using a programming tool (pictured A and B motors) press and hold the programming button until the blind/shade jogs three times. a. Insert a reset tool (pictured C motor) into the fitting and press and hold the reset tool program button for approximately 15 seconds. The red LED light blinks once, turns to a solid light, and then blinks rapidly and goes out. Proceed to step All controls and limits are erased and the motor is reset. Proceed to page 24 to set the upper and lower limits. MOTORIZATION TIPS OF THE TRADE Make sure you have your programming and/or reset tool with you on every service call. 19

20 12 AND 24 VOLT MOTOR PROGRAMMING AND RESET PROCEDURE Using the programming button is only necessary if replacing a lost or damaged control, deleting controls, or in the rare case a motor loses ability to receive the RF signal properly ( locks up ). SOLAR/ROLLER, SOFT, WOVEN WOODS, AND ALL HORIZONTAL TILT MOTORS To add a new control when the original is lost or damaged (Pairing): NOTE: Programming a new control does not require disconnecting power to other shades. 1. Locate the programming button on the motor (see pictures on page 21). 2. Using a programming tool, press and hold the program button on the motor until the shade/blind jogs one time. 3. Using a programming tool, press and release the programming button on the new control (remote or wall switch) until the blind/shade jogs one time. 4. All previous settings are maintained from the original control, including upper and lower limits and intermediate position, if set. To delete all controls and maintain upper and lower limit settings: 1. Locate the programming button on the motor (see picture on page 21). 2. Using a programming tool, press and hold the program button on the motor until the shade/blind jogs two times (approximately 10 seconds). 3. All controls are now erased and all previous settings are maintained from the original control, including upper/lower limits and intermediate position, if set. Proceed to the pairing process (pages or previous section) to add a new control to the motor. To reset the motor and delete all previous settings: NOTE: Before resetting the motor, keep the target motor powered but disconnect all other motors from their power source. 1. Locate the reset button on the motor (see picture on next page). 2. Using a programming tool, press and hold the program button on the motor until the shade/blind jogs three times (approximately 15 seconds). 3. All controls and limits are now erased and the motor is reset. Proceed to page 24 to set the upper/lower limits. 20 Visit graberblinds.com to view motorized control How To videos.

21 24-Volt Solar/Roller, Soft Motor 12-Volt Horizontal Motor 12-Volt Solar/Roller, Soft Motor 12-Volt Solar/Roller, Soft Motor = Program button locations = Programming tool 21

22 24-VOLT MOTOR PROGRAMMING SPEED ADJUSTMENT To increase or decrease motor speed, follow the instructions below. 1. Hold the buttons simultaneously until the blind/shade jogs. 2. Press to increase lift speed. Press to decrease lift speed. 3. Once desired speed is found, press and hold until the blind/shade jogs. MOTORIZATION PROGRAMMING CHANGING MOTOR DIRECTION (12 VOLT RF MOTORS, WHITE CELLULAR PLEATED MOTOR AND WHITE ROLLER/SOLAR MOTOR) If shade raises when is pressed or if the shade lowers when the is pressed the motor direction needs to be modified. Follow the steps below to correct motor rotation. 1. Move shade to the approximate half way point (shade should be moved away from upper and lower limit). 2. Using the control Press and simultaneously until the shade jogs. 3. Press the button until the shade jogs. 4. Motor direction is reversed. Press to check the new rotation direction. MOTORIZATION TIPS OF THE TRADE The 24-volt motor offers the unique capability of adjusting its speed. Use this feature to match lift speeds of shades mounted side by side (this includes different sizes or weights of shades). 22 Visit graberblinds.com to view motorized control How To videos.

23 120-VOLT MOTOR PROGRAMMING AND RESET PROCEDURE To add a new control when the original is lost or damaged (Pairing): 1. Perform a Dual Power Cut. Follow the pictures below to get one jog from the motor. shade will move only when the or is held. A B C D Remove plug from power for 2 seconds. Plug in power cord for 10 seconds. Remove plug from power for 2 seconds. Plug in power cord. Window covering will jog or move. 2. Using the programming tool, press and release the programming button on the control (remote or wall switch) until the shade jogs once. This confirms that the new control is added. 3. All previous settings are maintained from the original control, including upper and lower limits and intermediate position, if set. To reset the motor and delete all previous settings: 1. Perform a Dual Power Cut. Follow pictures A D above to get one jog from the motor. 2. Using the programming tool, press and hold the programming button on the control (remote or wall switch) until the shade jogs twice. Do not release the programming button until the jogging is complete, or you will have to start the dual power cut from the beginning. 3. All controls and limits are now erased and the motor is reset. Proceed to page 24 to set the upper/lower limits. NOTE: It may be necessary to move control closer to motor head when programming. Motors in programming mode have a reduced RTS range. 23

24 PROGRAMMING LIMITS NOTE: Before resetting a motor, keep the blind/shade target motor powered but disconnect all other motors from their power source. After a motor has been reset or when the motor is replaced in an existing blind/ shade, power the motor and follow these instructions: 1. Pairing a control to new motor Press both the and buttons at the same time until the shade jogs. You are now in the programming mode and the shade will move only when the or is held. 2. Check Directions Press the or and confirm proper direction. To change the direction, press and hold or until the shade jogs. CAUTION: Be prepared to stop the shade operation at the lower limit, fully read step 3 before proceeding. Be aware tilt blinds slats rotate quickly and can over-torque and bind the cords. 3. Set the Upper Limit Bring the shade to desired upper limit stop point. Press or and until the motor moves, then release. (If the shade stops when the buttons are released, bring the shade back to the upper limit and repeat.) Stop the motor when the shade reaches the desired lower limit by pressing or. Adjust as necessary by pressing or. 4. Set the Lower Limit Press or and buttons at the same time until the shade moves, then release. The shade will stop at the upper limit. 5. Confirm Limits Settings Press and hold or until the shade jogs to confirm limit settings. 6. Press and hold the programming button on the back of the control until the shade jogs. 7. Shade is now ready to operate in user mode. MOTOR TIP: It is important that power is not disconnected during operation to avoid unintentional resetting of motor limits. If your motor begins to run noticeably slower it is time to change the batteries. 24 Visit graberblinds.com to view motorized control How To videos.

25 LOW VOLTAGE POWER OPTIONS Single or dual reloadable battery tubes Each tube requires 8 AA Lithium batteries. Dual tubes are required on all shades (cellular, pleated, solar, roller, soft and woven wood) greater than 3600 sq. in. to extend battery life (excludes horizontal blinds). Dual battery tubes include an offset Y harness for installation (11" and 27 1 /4" cable lengths). Battery tube installation considerations Single battery tube dimensions: 18" x 1¼" Dual battery tube dimensions: 18" x 2¼" when mounted side-by-side 36" x 1¼" when mounted end-to-end Battery tubes are installed outside of the window covering For outside mounts, tubes can be installed above or to the side of the shade. For inside mounts, tubes are usually top mounted (behind the headrail) between the shade and the window; to mount the tubes, additional space will be needed. Solar power kit Each kit includes Solar Panel, battery tube and 10 AA NiMH rechargeable batteries, Y harness, battery tube clips, solar panel mounting brackets, glass-mount adhesive strips, alcohol wipes, and instructions. NOTE: It is important for the batteries to have a full charge before operation of the blind or shade to maximize battery life and ensure proper operation. The batteries are fully charged at the time of shade fabrication and should be installed within a week of fabrication. If installation is delayed, place solar panel with filled battery tube in a location that gets periodic sun to keep it charged. Rechargeable NiMH battery charger can be used prior to installation to top off batteries. Plug-in 12-volt and 24-volt transformers Eliminate the need to replace batteries with a plug-in transformer. Plan to hide cord behind window treatment or along window casement. 12-volt: 6 ft. power cord + 8 ft. extension 24-volt: 8 ft. removable motor lead and 15 ft. power cord, cord can be cut to length Multiple-shade, 12-volt, and 24-volt power supply 5- and 10-motor power supply are available for direct-wired applications. See your Motorization Product Guide for more information. 25

26 MOTORIZATION TIPS OF THE TRADE Batteries or transformer? Batteries offer the ability to hide the power more easily than a cord and transformer in many cases. However, batteries need to be changed periodically, so consider ease of access and the expense of 8-16 lithium batteries every year or two for each shade. Extension cables are available (48" and 96") to help installation. Plug-in transformers are a one-time cost and eliminate the need for accessing a battery tube for periodic changes. If you have a means of hiding the wire and transformer (e.g., behind a curtain), transformers are generally the better choice. Recommending a total window solution (which includes side panels, top treatments, etc.) provides an excellent means of hiding the wire. A solar panel with rechargeable batteries is arguably the best alternative. This option offers long periods between battery changes, environmental friendliness, and easy concealment in most cases. Multi-motor power supplies are used when wires can be hidden behind walls or ceilings, known as "direct-wired." Great for new construction projects or remodels. New Home Automation Integration The home automation landscape is changing rapidly. There are many low cost systems being introduced that feature complete wireless control for a home's many products and systems. Graber motorized window coverings, powered by Somfy motors, are the perfect addition to these systems. There are numerous interface devices we offer that you can add to new or existing motorized window coverings and integrate seamlessly with home automation systems. More information on integration devices can be found in the Motorization Product Guide on swfconnect.com. 26 Visit graberblinds.com to view motorized control How To videos.

27 27

28 MOTORIZATION TECHNICAL SUPPORT prompt 4 motorization.support@springswindowfashions.com Visit graberblinds.com to view our motorized control How To video series. Graber and the Graber logo are registered trademarks of (140890) 28 Springs Window Fashions, Visit LLC. graberblinds.com to view motorized control How To videos.