The overall concept for individual requirements: CLEARPOINT high pressure filters, water separators and drains

Transcription

1 Flanged and threaded filters with BEKOMAT High pressure filters to 50 bar High pressure filters 100 to 500 bar Water separator The overall concept for individual requirements: CLEARPOINT high pressure filters, water separators and drains The CLEARPOINT compressed air filters are part of an integrated overall concept for professional compressed air processing. They therefore offer all advantages of the BEKO technology for more efficiency and profitability: function optimised components and quality without compromises. Efficient condensate management CLEARPOINT water separators for use with aftercoolers and refrigeration dryers achieve an efficiency of up to 99% over a wide volume spectrum due to the flow optimised design. Through this, they guarantee highest separation rates at lowest costs. Performance under high pressure CLEARPOINT high pressure filters are available for operating pressure ranges of up to 50 bar and for 100 to 500 bar. The construction of the filter housing is, designed to meet the special challenges in high pressure systems and ensures optimum separation performance. Optimum performance in a combination The electronically level controlled BEKOMAT 20 FM condensate drain is specifically designed for use with CLEARPOINT in combination with CLEARPOINT compressed air filters. Besides the reliable draining performance of a BEKOMAT, further advantages result from this combination like an integrated filter service life monitoring or the transmission of fault indications via a volt free contact. 5

2 BEKO Products Filtration CLEARPOINT W Quality with a system. Worldwide We at BEKO Technologies develop, manufacture and distribute products and systems for an optimised compressed air and compressed gas quality throughout the world. From the processing of compressed air and compressed gas through filtration and drying, via proven condensate technology to instruments for the quality supervision and measurement. From the small compressed air application to demanding process technology. Since its founding, BEKO has continuously given decisive inputs to compressed air technology. Our ground breaking ideas have exerted considerable influence on the development of the compressed air treatment industry. In order to keep this going, more than 10% of our employees work in the field of innovation. With this potential and with our personal commitment, we at BEKO stand for trend setting technologies, products and services. CLEARPOINT CLEARPOINT CLEARPOINT Bekomat Drypoint M PLUS Bekomat Drypoint M PLUS CLEARPOINT Drypoint AC CLEARPOINT Bekomat Bekomat Drypoint RA Bekomat CLEARPOINT Öwamat Bekosplit The product categories Condensate drainage BEKOMAT Filtration CLEARPOINT Measurement instrumentation METPOINT Condensate processing ÖWAMAT BEKOSPLIT Drying DRYPOINT EVERDRY Process technology BEKOBLIZZ BEKOKAT The performance spectrum of the CLEARPOINT filters ranges from 35 to 31,240 m³/h; includes threaded and flanged filters as well as high pressure filters up to 500 bar. BEKO Technologies GmbH Im Taubental 7 D Neuss Phone Fax beko@beko.de XP CP-W 001 Edition Subject to technical changes without prior notice. Specifications do not represent physical characteristics in the sense referred to in the German Civil Code. Registered trademarks of BEKO TECHNOLOGIES GmbH, Neuss, Germany

3 Beko Products Clearpoint W Filtration Less is more CLEARPOINT W: lower costs, highest separation rate

4 BEKO Products Filtration CLEARPOINT W Everything is in flow: Optimised condensate separation When compressed air cools down in the aftercoolers of compressors, or in refrigeration dryers, condensed moisture is a by-product. This can lead to costly consequential damage: pipes corrode, pneumatic valves, cylinders and tools wear prematurely, and the efficiency of the compressed air system is reduced. This results in increasing costs for the compressed air technology, and in reduced process efficiency. Flow without resistance CLEARPOINT W from BEKO removes the condensate from compressed air with a high separation efficiency, and in a cost-effective manner. Flow resistance is decisive in this respect. With a share of more than 90%, it has a major influence on the cost profile of a water separator. The lower the flow resistance is, the lower the operating costs are. For this reason, CLEARPOINT W water separators are designed to deliver the lowest flow resistance possible under all conditions. Highest separation rates Another benefit is the intelligent housing construction of the threaded filters. The characteristics of the inside of the housing, with the swirl disc developed by BEKO and the innovative rectifier, enables the development of a homogeneous velocity profile at varying flow rates. Because of this technology advantage, CLEARPOINT W achieves the highest separation rates. Moreover, in contrast to conventional cast housings with rough surfaces that are not protected against corrosion, our CLEARPOINT W housing consists consists of high density smooth, and saltwater proof anodised extruded aluminium profiles. The advantages at a glance Process reliable particle and condensate separation 99% separation rate over a broad range of performance Effective corrosion protection Flow optimised construction Very low pressure difference BEKOMAT for optimum condensate drainage Efficiency CLEARPOINT W water separators Through the flow optimised design, an efficiency of up to 99% is achieved over a broad range of performance. This results in the highest separation rates at the lowest costs. 100 Efficiency of the water separation (%) > with CLEARPOINT W Conventional water separators Flow rate (% of the nominal capacity) > 2

5 BEKO Products Filtration CLEARPOINT W Effective corrosion protection Alumini um (1999) Aluminium, chromatised (2000) Aluminium, cathodic dip-coating (2001) 3 Saltwater-proof aluminium, anodised (2002) BEKO Resistant in a salt spray test in hours > (DIN 50021) CLEARPOINT W with a threaded filter connection 1 Connections The connections are perfectly matched to the outlet of the compressor. The flowoptimised inlet leads to reduced flow resistance. 2 Internal swirl insert When the compressed air has entered the CLEARPOINT W separator housing, it reaches a special internal swirl insert that makes the entering compressed air flow experience a special rotary motion with high velocity. The consequence: the outwardly directed rotational forces lead the condensate droplets to the separator wall, from where they flow into the collecting zone. 3 Effective corrosion protection Condensate accumulating during compressed air filtration is almost always aggressive, so that unprotected housings corrode. CLEARPOINT W filter housings are made of saltwater proof aluminium and, in addition, are fully anodised and their outside is powder coated. 5 Rising pipe A specially designed rising pipe avoids particle transfer to the upwardly directed rotational flow of the already purified compressed air. 6 Rectifier The innovative rectifier leads the compressed air to the outlet and reduces flow losses to a minimum. 7 Shielded collecting zone The shielding of the collecting zone settles the air flow in this area in order to effectively avoid the dispersion and re-entrainment of already separated liquids. 8 BEKOMAT More than 60% of the total amount of condensate already accumulates in the water separator. The electronically level controlled BEKOMAT ensures reliable drainage. 4 Increased safety The safe shutter mechanism offers a 100% control when opening the filter housing. In the event that the housing is opened under pressure, a warning signal sounds. The shutter mechanism also prevents unlatching during vibrations. 3

6 CLEARPOINT Water separator A B A B C1 C2 C2 C1 D D Threaded filters (S040 M030) Flanged filters (L080 L304) Model S040 S050 S075 M010 M015 M020 M022 M025 M030 L080 L100 L102 L150 L156 L200 L204 L254 L304 Connection (In-Out) Volume flow (m 3 /h) ½" ¾" 1" 1½" 2" 2" 2½" 3" DN80 DN100 DN100 DN150 DN150 DN200 DN200 DN250 DN Volume (l) Weight (kg) Category in accordance with PED97/23/EG I I II II I II II II III III III IV IV Dimensions in mm A B C C D Standard with Condensate drain BEKOMAT 20 BEKOMAT Vario 20 BEKOMAT 14 BEKOMAT 16 Flow enhanced housing made of saltwater proof aluminium or steel The outside is additionally powder coated Max. operating pressure 16 bar up to L bar Difference pressure 0,06 bar At a different operating pressure. please multiply the indicated volume flow by the corresponding correction factor. bar Correktion factor