Malleable Pipe Fittings, and Unions, Cast Iron Pipe Fittings and Wardlox and Teelox

Transcription

1 Malleable Pipe Fittings, and Unions, Cast Iron Pipe Fittings and Wardlox and Teelox Schedule No Effective May 23, 2011 Blossburg, Pennsylvania Fax:

2 TERMS & CONDITIONS OF SALE 1. PRICES: This price sheet supersedes all previous issues. s in price sheets are subject to change without notice. s apply only to standard sizes as listed in catalog. 2. APPROVAL & ACCEPTANCE OF ORDERS: All orders are accepted on the basis of prices in effect at the time of shipment. 3. TAXES: Any Manufacturer or Sales Tax payable on the transaction under any effective statute will be added to the prices and terms quoted, unless a valid exemption certificate is on file. 4. CREDIT TERMS: Two percent cash discount tenth prox., - Net 30 days. 5. DELIVERY & SHIPMENT OF GOODS: All goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Completion of all orders accepted and fulfillment of all agreements or contracts entered into are subject to any delay which might be occasioned by labor disputes, fires, accidents, embargoes, trade restrictions, governmental directives or other causes beyond our control. All promises of shipment will be as closely estimated as possible. We use our efforts in every case to ship within the time promised, but cannot guarantee to do so. All claims for shortage must be made on receipt of goods. We prove our count by weighing the package. Claims for shortage are subject to that test. Typographical, clerical, arithmetical errors or omissions in orders, invoices, quotations, price schedules, acknowledgments, or other documents are subject to correction. 6. RETURN OF GOODS: No goods will be taken back and credited without prior approval and issuance of a return goods authorization (RGA) number. All fittings returned with our permission must be goods of our manufacture, and in clean saleable condition. Credit will only be allowed on the basis of prices agreed upon. If product returned is a result of a customer ordering error or overstocking situation, the credit will be less 20 percent to cover handling costs, less any costs of returning to a saleable condition, and less transportation charges on original and return shipments. Orders for special goods are not subject to cancellation for any reason after work has been started on them, except upon agreement to make payment for all work which has been performed. 7. WARRANTY: We guarantee these products to the extent that we will replace those having manufacturing defects, under normal use and service. No charge for labor or expense required to repair defective goods, or occasioned by them, will be allowed. If the goods are defective, the measure of the damage is the price of the defective goods only. 8. FREIGHT TERM: Shipments of 2000 pounds or more will be prepaid in the continental U.S. (except Alaska). We reserve the right to choose shipping point and carrier. 9. CARTON & BOX QUANTITY ADJUSTMENT: On orders received for less than master carton or box quantities, we reserve the right to adjust to the next carton or box quantity above the number of pieces shown on the order. Items subject to adjustment are identified with stars in the price sheet. 10. WEIGHTS: The weights per piece or per pieces given in the price sheet, catalogs, and quotations are not guaranteed, but are approximate and for your convenience. 11. ILLUSTRATIONS: Illustrations in catalogs and price sheets are actual representations of a certain size of each product line but do not necessarily represent all sizes in all details. Materials, Designs, and Specifications in catalogs and price sheets are subject to change without notice in keeping our policy of continuing product improvement. 12. SPECIAL CONDITIONS: Any additional cost incurred in packaging or in making any special tests or inspection requested by Buyer in addition to those commercially supplied by Ward Manufacturing, Inc., will be charged to Buyer. Such tests and inspections will be made at the factory before date of shipment. Orders for fittings or parts will be subject to a net minimum invoice charge of $35.00 Net plus applicable handling and freight charges. 13. US EXPORT COMPLIANCE: The products sold by Ward Manufacturing, Inc. may be subject to the export control laws and regulations of the United States Government. Buyer may not make any disposition of such products, by way of sale, export, re-export, transshipment or otherwise, except as permitted under applicable U.S. law. page 2

3 Malleable Iron Pipe Fittings Class 150 Schedule No Malleable Iron 90 Elbows Fig. 47 Piece 1/ H 6.00 H / H 5.86 H / H 5.86 H / J 4.06 J / J 4.90 J J 8.51 J / J H / J H J H / H H H H / POA POA ,355 POA POA , /4 x 1/ H /8 x 1/ POA POA 3/8 x 1/ H /2 x 3/ H 7.74 H /2 x 1/ H 7.95 H /4 x 1/ POA POA 3/4 x 1/ H 7.95 H /4 x 3/ H x 3/ H H x 1/ H H x 3/ H /4 x H H /4 x 3/ H H /4 x 1/ H /2 x 1-1/ H H /2 x H H /2 x 3/ H H /2 x 1/ H H x 1-1/ H H x 1-1/ H H x H H x 3/ H H x 1/ H H /2 x /2 x 1-1/ x x 2-1/ POA POA 4 x POA POA Malleable Iron 45 Elbows Fig. 48 1/ H / H 8.83 H / H 8.83 H / H 6.70 H / H 8.29 H H H / H H / H H J Preceding List Indicates Available In Quantity From Blossburg Factory Malleable Iron 45 Elbows (continued) Fig. 48 Piece H H / ,120 POA POA ,910 POA POA Malleable Iron 90 Street Ells Fig. 50 1/ H 8.65 H / H 8.65 H / H 8.65 H / J 8.40 H / J 8.40 H J H / H H / H H H H / ,065 POA POA 1/2 x 3/ /4 x 1/ x 3/ POA POA 1-1/4x3/ POA POA 1-1/4x POA POA 1-1/2x POA POA 1-1/2 x 1-1/ H x 1-1/ POA POA Malleable Iron 45 Street Ells Fig. 51 1/ H H / H H / H H / H 9.37 H / H H H H / H H / H H H H Malleable Iron Tees Fig. 52 1/ H 9.04 H /8 x 1/ POA POA 1/ H 8.51 H /4 x 1/ POA POA 1/4 x 1/4 x 3/ POA POA 3/ H 8.51 H /8 x 3/8 x 1/ POA POA 3/8 x 1/4 x 1/ POA POA 3/8 x 1/4 x 3/ POA POA 1/ J 5.42 J 7.08 H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 3

4 Malleable Iron Pipe Fittings Class 150 Schedule No Piece Piece Malleable Iron Tees (continued) Fig. 52 Malleable Iron Tees (continued) Fig. 52 3/ J 7.78 J /4 x 3/8 x 3/ POA POA 3/4 x 3/4 x 1-1/ POA POA J H / H H / H H H H / , /8 x 3/8 x 1/ /2 x 1/2 x 3/ H /2 x 1/2 x 1/ H 9.24 H /2 x 3/8 x 1/ H /2 x 3/8 x 3/ H H /2 x 1/4 x 1/ /8 x 3/8 x 1/ H /4 x 3/4 x 1/ H H /4 x 3/4 x 3/ H /4 x 3/4 x 1/ /4 x 1/2 x 3/ H H /4 x 1/2 x 1/ H H /4 x 3/8 x 3/ H POA 3/4 x 1/4 x 3/ /4 x 3/4 x H H /2 x 1/2 x 3/ H H /2 x 1/2 x x 1 x 3/ H H x 1 x 1/ H H x 1 x 3/ H x 1 x 1/ x 1 x 1-1/ H x 1 x 1-1/ x 3/4 x H H x 3/4 x 3/ H H x 3/4 x 1/ H H x 1/2 x H x 1/2 x 3/ H x 1/2 x 1/ H x 1/4 x H x 1 x POA POA 1-1/4 x 3/4 x 1-1/ H /4 x 3/4 x H /4 x 3/4 x 3/ H /4 x 1/2 x POA POA 1-1/4 x 1/2 x 1-1/ H /4 x 1-1/4 x 3/ POA POA 1-1/4 x 1-1/4 x H H /4 x 1-1/4 x 3/ H H /4 x 1-1/4 x 1/ H H /4 x 1 x 1-1/ H /4 x 1 x H H /4 x 1 x 3/ H /4 x 1 x 1/ H /4 x 1-1/4 x 1-1/ H /4 x POA POA 1-1/2 x 3/4 x 1-1/ H /2 x 3/4 x 3/ H /2 x 1/2 x 1-1/ H /2 x 1 x 1-1/ POA POA 1-1/2 x 1-1/2 x 1-1/ H H /2 x 1-1/2 x H H /2 x 1-1/2 x 3/ H H /2 x 1-1/2 x 1/ H H /2 x 1-1/4 x 1-1/ H /2 x 1-1/4 x 1-1/ H /2 x 1-1/4 x H H /2 x 1-1/4 x 3/ H H /2 x 1-1/4 x 1/ /2 x 1 x 1-1/ H H /2 x 1 x H /2 x 1-1/2 x POA POA 2 x 2 x 1-1/ H H x 2 x 1-1/ H H x 2 x H H x 2 x 3/ H H x 2 x 1/ H H x 1-1/2 x H H x 1-1/2 x 1-1/ H x 1-1/2 x 1-1/ H x 1-1/2 x H H x 1-1/4 x H H x 1-1/4 x 1-1/ H x 1-1/4 x 1-1/ POA POA 2 x 1 x H H x 1 x H x 3/4 x H H x 1/2 x H x 2 x 2-1/ POA POA 2-1/2 x 1-1/2 x POA POA 2-1/2 x 1-1/2 x 2-1/ POA POA 2-1/2 x 2 x POA POA 2-1/2 x 2 x 2-1/ POA POA 2-1/2 x 2-1/2 x /2 x 2-1/2 x 1-1/ /2 x 2-1/2 x 1-1/ /2 x 2-1/2 x /2 x 2-1/2 x 3/ /2 x 2-1/2 x POA POA 3-1/ POA POA 3 x 2 x POA POA 3 x 2-1/2 x POA POA 3 x 2-1/2 x 2-1/ POA POA 3 x 3 x 2-1/ x 3 x x 3 x 1-1/ x 3 x 1-1/ x 3 x x 3 x 3/ x 2 x x 1-1/ POA POA 4 x 2-1/ POA POA 4 x 4 x ,075 POA POA 4 x 3 x ,030 POA POA ,550 POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 4 Company Name P.O. No. Date

5 Malleable Iron Pipe Fittings Class 150 Schedule No Malleable Iron Street Tees Fig. 64 Piece 1/ POA POA 1/ POA POA 3/ H H / POA POA H H / H H /4 x 1 x 1-1/ / Malleable Iron Crosses Fig. 61 1/ POA POA 1/ / / H H / H H H H / H H / H H H H / POA POA POA POA ,290 POA POA Malleable Iron Straight & Reducing Pipe Couplings Fig. 53 1/8 (steel) H 7.55 H / H 7.28 H / H 7.28 H / H 5.61 H / H 6.58 H J 9.84 H / H H / H H H H / /4 x 1/ H 7.67 H /8 x 1/ H 7.67 H /8 x 1/ /2 x 3/ H 6.59 H /2 x 1/ H 6.97 H /2 x 1/ H /4 x 1/ J 7.37 H /4 x 3/ H 8.80 H /4 x 1/ H 8.80 H /4 x 1/ H 9.17 H x 3/ H H x 1/ H H x 3/ H H x 1/ /4 x H H Malleable Iron Straight & Reducing Pipe Couplings (continued) Fig. 53 Piece 1-1/4 x 3/ H H /4 x 1/ H H /2 x 1-1/ H H /2 x H H /2 x 3/ H H /2 x 1/ H H x 1-1/ H H x 1-1/ H H x H H x 3/ H H x 1/ H H /2 x /2 x 1-1/ /2 x 1-1/ /2 x x 2-1/ x x 1-1/ x 1-1/ x /2 x POA POA 3-1/2 x POA POA 4 x 1-1/ POA POA 4 x 2-1/ x x x 3-1/ POA POA 5 x POA POA 6 x ,085 POA POA Malleable Iron Return Bends Open Fig. 60 3/ Malleable Iron 45 Y 3/ POA POA 1/ POA POA 3/ POA POA POA POA 1-1/ / POA POA POA POA 2-1/ POA POA POA POA ,570 POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 5

6 Malleable Iron Pipe Fittings Schedule No Piece Piece Malleable Iron Caps Fig. 49 Malleable Iron Floor Flanges (continued) Fig. 15 1/ H 5.40 H / H 4.53 H / H 4.10 H / H 5.56 H H 6.72 H / H 8.86 H / H H H H / H / POA POA POA POA POA POA Malleable Iron Locknuts Fig. 55 1/8 (steel) /4 (steel) H 5.18 H / H / H / H H / H / H H Malleable Iron Waste Nuts Fig. 62 1/ / Malleable Iron Extension Fig. 54 3/ POA POA 1/ H / H H / H Malleable Iron Floor Flanges Fig. 15 1/4 x 2-3/ /8 x 2-15/ /2 x H H /4 x 3-1/ H H x 3-7/ H H /4 x 3-7/ H H /2 x 4-1/ H H x 5-1/ H H /2 x 5-13/ x 6-3/ Malleable Right & Left Hand Thread Couplings Fig. 53 1/ H / H H / H / H H Malleable Iron 90 Elbows Class 300 & A.A.R. Fig. 65 1/ H / H / H H / H H H H / H / H H H H , /8 x 1/ POA 1/2 x 3/ POA 3/4 x 1/ x 1/ POA POA 1 x 3/ /4 x 3/ POA POA 1-1/4 x POA POA 1-1/2 x POA POA 1-1/2 x 1-1/ POA POA 2 x 1-1/ POA POA 2 x 1-1/ POA POA ,635 POA POA Malleable Iron 45 Elbows Class 300 & A.A.R. Fig. 65A 1/ / / H / H H / H / H H / POA POA POA POA ,341 POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 6 Company Name P.O. No. Date

7 Malleable Iron Pipe Fittings Class 300 Schedule No Piece Piece Malleable Iron Street 90 Elbows Class 300 & A.A.R. Fig. 65B Malleable Iron Tees Class 300 & A.A.R. (continued) Fig. 66 1/ / / H / H H / H / H H POA POA Malleable Iron Street 45 Elbows Class 300 & A.A.R. 1/ POA 3/ POA POA 1 1/ POA 1 1/ POA POA Malleable Iron Tees Class 300 & A.A.R. Fig. 66 1/ / / H H / H H H H / H / H H H H , /8 x 1/ POA 1/2 x 3/ /2 x 1/ /4 x 1/ POA POA 3/4 x 3/ POA POA 3/4 x 1/ H /4 x 1/2 x 1/ POA POA 3/4 x 1/2 x 3/ POA POA 1 x 1/2 x POA POA 1 x 1/ POA POA 1 x 3/ H x 3/4 x 3/ POA POA 1 x 3/4 x POA POA 1 x 1/ H H /4 x 1/ POA POA 1-1/4 x H /4 x 1 x POA POA 1-1/4 x 3/ /2 x H /2 x 1-1/ POA POA 1-1/2 x 3/ H x 1/ H H x 3/ x x 1-1/ POA POA 2 x 1-1/ H x 1-1/2 x POA POA 2-1/ POA POA 2-1/2 x 1-1/ POA POA 2-1/2 x POA POA 3 x ,340 POA POA Malleable Iron Crosses Class 300 & A.A.R. Fig. 68 1/ POA POA 1/ / H / / H H Malleable Iron Couplings & Reducing Couplings Class 300 & A.A.R. Fig. 67 1/ / / H / H H / H / H H H / POA POA 3/8 x 1/ /2 x 3/ H /2 x 1/ H /4 x 1/ POA POA 3/4 x 3/ POA POA 3/4 x 1/ H x 1/ POA POA 1 x 1/ H x 3/ H x 3/ POA POA 1-1/4 x 1/ POA POA 1-1/4 x 3/ H /4 x H /2 x 1/ POA POA 1-1/2 x H /2 x 3/ H /2 x 1-1/ H x 1-1/ H x 1/ POA POA 2 x 3/ POA POA 2 x H /2 x 1-1/ POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 7

8 Malleable Iron Fittings and Unions Schedule No Effective May 23, 2011 Piece Malleable Iron Couplings & Reducing Couplings Class 300 & A.A.R. (continued) Fig /2 x POA POA POA POA 3 x 1-1/ POA POA 3 x POA POA 3 x 2-1/ POA POA 4 x POA POA 4 x POA POA Malleable Iron Caps Class 300 & A.A.R. Fig. 69 1/ / / / H H / H / H H / POA POA POA POA Malleable Iron Unions Brass To Iron Class 150 Fig. 91 1/ H / H / H / J H / J H /4 x 1/ J H / H H / H H H H / , Malleable Iron Unions Brass To Iron Class 250 Fig. 92 1/ POA 1/ / / H H / H H H / H H / H H H.65 H / , Malleable Iron Union Brass To Iron Class 300 & A.A.R. Fig. 93 Piece 1/ / / / H H / H H H H / H H / H H H H / ,730 POA POA Malleable Iron Unions All Iron Class 150 Fig. 94 1/ POA 1/ / / H / H H H / H / H H / Malleable Iron Unions All Iron Class 300 & A.A.R. Fig. 99 1/ / POA 3/ POA 1/ / H H / H / H / H POA POA Malleable Iron Unions Brass To Brass Class 300 & A.A.R. Fig. 98 1/ / / H H / H H H / H / H.75 H J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 8 Company Name P.O. No. Date

9 Malleable Iron unions and clamps Schedule No Malleable Iron Unions Brass To Brass Class 300 & A.A.R. (continued) Fig. 98 Piece H H / POA , Malleable Iron Gasket Unions Class 150 Fig. 95 3/ POA 1/ / / / Top Beam Clamps Piece 3/8 Small Mouth 31 H 4.11 H POA 1/2 Small Mouth 46 H 6.72 H POA 3/8 Wide Mouth 52 H 8.11 H POA 1/2 Wide Mouth 50 H H POA Di-Electric Unions Class 150 Fig. 96 1/2 W /4 W C-Clamps 3/8 C-Clamp 28 H /2 C-Clamp 28 H 9.74 J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 9

10 Plugs and bushings Schedule No Effective May 23, 2011 Plugs - Regular Cored Figs. 01 & 02 Piece Hexagon Bushings Fig. 09 Piece 1/ H 3.00 H / H 3.79 H H 3.79 H / H 6.05 H / H 8.56 H H 9.98 H / H / SQUARE HEAD BAR HEAD H BAR HEAD BAR HEAD Plugs - Solid Figs. 03 & 04 1/ H 3.36 H / H H / H / H / BAR HEAD BAR HEAD POA Countersunk Plugs Fig. 05 1/2 MI /4 MI MI / / / / POA POA Hex Head Cleanout Plugs Fig / POA /8x1/ H /2x3/ H 7.61 H /2x1/ H /2x1/ H /4 x 1/ H /4 x 3/ H 7.32 H /4 x 1/ H 7.14 H /4 x 1/ H 7.52 H x 3/ H 6.92 H x 1/ H 7.03 H x 3/ H 9.50 H x 1/ H 9.24 H x 1/ H H /4 x H 9.04 H /4 x 3/ H 9.04 H /4 x 1/ H H /4 x 3/ H /4 x 1/ /4 x 1/ H /2 x1-1/ H H /2 x H H /2 x 3/ H H /2 x 1/ H H /2 x 3/ H H /2 x 1/ H H /2 x 1/ x 1-1/ H H x 1-1/ H H x H H x 3/ H H x 1/ H H x 3/ H x 1/ H /2 x H /2 x 1-1/ /2 x 1-1/ /2 x /2 x 3/ /2 x 1/ x 2-1/ x x 1-1/ x 1-1/ x x 3/ x 1/ x 1/ /2 x /2 x 2-1/ /2 x /2 x 1-1/ /2 x 1-1/ /2 x POA 4 x 3-1/ x x 2-1/ J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 10 Company Name P.O. No. Date

11 Plugs and Bushings Schedule No Piece Piece Hexagon Bushings (continued) Fig. 09 Flush Bushings Fig x x 1-1/ x 1-1/ x x 1/ x x 3-1/ POA POA 5 x x 2-1/ x x 1-1/ POA POA 6 x x x x 2-1/ x x , x , Tank Bushings, Double Tapped Heavy Type Only Fig x 1/2 x 1/ /2 x 1 x x 1-1/2 x 1-1/ x 1-1/4 x 1-1/ x 1 x x 3/4 x 3/ x 1/2 x 1/ x 3/8 x 3/ POA 3 x 2 x x 1 x x 3 x x 2-1/2 x 2-1/ x 2 x x 1-12 x 1-1/ x 1 x x 3/ H H x 1/ H H /4 x H H /4 x 3/ /4 x 1/ /2 x 1-1/ H H /2 x H H /2 x 3/ /2 x 1/ x 1-1/ H H x 1-1/ H H x 1-1/ x H H x 3/ x 1/ /2 x /2 x 1-1/ POA 3 x 2-1/ x x 1-1/ POA 3 x 1-1/ POA 3-1/2 x 1-1/ /2 x 2-1/ /2 x POA x 3-1/ POA 4 x x 2-1/ x POA 5 x POA 6 x POA 6 x x x x J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 11

12 Cast Iron Pipe Fittings Class 125 Schedule No Effective May 23, 2011 Piece Piece Cast Iron 90 Elbows Fig. 21 Cast Iron 45 Elbows Fig. 23 1/ H / H /2 41 H /4 69 H H / H / H H / H / POA , ,040 POA POA ,985 POA POA ,456 POA POA 3/4 x 1/2 56 H /4 x 3/ /2 x 1/ POA POA 1/2 x 3/8 34 POA POA 1 x 1/ H x 3/ H /4 x H /4 x 3/ H POA 1-1/4 x 1/ H /2 x 1-1/ H POA 1-1/2 x H POA 1-1/2 x 3/ H POA 1-1/2 x 1/ H x 1-1/ H POA 2 x 1-1/ H x H x 3/ H x 1/ H /2 x POA 2-1/2 x 1-1/ POA 4 x , POA 4 x 2-1/ x POA 4 x 1-1/ /2 x 1-1/ /2 x /2 x 3/ x 2-1/ x POA 3 x 1-1/ x 1-1/ POA 3 x POA 5 x ,690 POA POA 6 x ,038 POA POA 6 x ,465 POA POA 1/ POA POA 3/ POA POA 1/2 36 H /4 60 H H / H / H H / POA ,696 POA POA ,530 POA POA Cast Iron Straight Tees Fig. 24 1/ POA 3/ H H POA 1/2 55 H / H H / H / H H / POA POA 3-1/ , , ,718 POA POA ,960 POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 12 Company Name P.O. No. Date

13 Cast Iron Pipe Fittings Class 125 Schedule No Cast Iron Reducing Tees Fig. 25 Piece Cast Iron Reducing Tees (continued) Fig. 25 Piece 1/2 x 1/2 x 1/ POA POA 1/2 x 1/2 x 3/ POA 1/2 x 1/2 x 3/ H /2 x 1/2 x POA POA 3/4 x 3/4 x 1/ POA POA 3/4 x 3/4 x 1/ H POA 3/4 x 3/4 x 3/ /4x1/2x3/ H POA 3/4x1/2x1/ H POA 3/4 x 3/4 x H x 1 x 3/ H x 1 x 1/ H x 1 x 3/ x 3/4 x H POA 1 x 3/4 x 3/ H POA 1 x 3/4 x 1/ x 1/2 x H x 1/2 x 3/ x 1/2 x 1/ POA 1 x 1 x 1/ POA POA 1 x 1/4 x x 1 x POA POA 1 x 1 x 1-1/ H x 1/2 x 1-1/ x 3/4 x 1-1/ /4 x 1/2 x 1-1/ H POA 1-1/4 x 1/2 x 1-1/ /4 x 1/2 x H POA 1-1/4 x 1/2 x 3/ /4 x 1/2 x 1/ /4 x 3/4 x 1-1/ /4 x 3/4 x 1-1/ H POA 1-1/4 x 3/4 x H /4 x 3/4 x 3/ H POA 1-1/4 x 3/4 x 1/ /4 x 1-1/4 x 1-1/ H /4 x 1-1/4 x H /4 x 1-1/4 x 3/ H POA 1-1/4 x 1-1/4 x 1/ H /4 x 1 x H /4 x 1 x 1-1/ H /4 x 1 x 1-1/ H /4 x1 x POA POA 1-1/4 x 1 x 3/ H /4 x 1 x 1/ H /4 x 1-1/4 x POA POA 1-1/2 x 3/4 x 1/ /2 x 3/4 x 3/ /2 x 3/4 x POA 1-1/2 x 3/4 x 1-1/ H /2 x 3/4 x 1-1/ H POA 1-1/2 x 1/2 x 1-1/ H /2 x 1/2 x 1-1/ H /2 x 1/2 x 1/ /2 x 1/2 x 3/ /2 x 1 x 1/ H /2 x 1 x 3/ H /2 x 1 x H POA 1-1/2 x 1 x 1-1/ H /2 x 1 x 1-1/ H /2 x 1 x H /2 x 1-1/4 x 1/ H /2 x 1-1/4 x 3/ H /2 x 1-1/4 x H /2 x 1-1/4 x 1-1/ H /2 x 1-1/4 x 1-1/ H /2 x 1-1/4 x H /2 x 1-1/2 x 1/ H /2 x 1-1/2 x 3/ H /2 x 1-1/2 x H /2 x 1-1/2 x 1-1/ H /2 x 1-1/2 x H /2 x 1-1/2 x 2-1/ H x 2 x 1-1/ H x 2 x 1-1/ H x 2 x H x 2 x 3/ H x 2 x 1/ H x 1-1/2 x H POA 2 x 1-1/2 x 1-1/ H x 1-1/2 x 1-1/ H POA 2 x 1-1/2 x H x 1-1/2 x 3/ H x 1-1/2 x 1/ H x 1-1/4 x H POA 2 x 1-1/4 x 1-1/ H x 1-1/4 x 1-1/ H POA 2 x 1-1/4 x H x 1-1/4 x 1/ POA 2 x 1-1/4 x 3/ POA POA 2 x 1 x H x 1 x 1-1/ H x 1 x 1-1/ x 1 x H POA 2 x 1 x 3/ H x 3/4 x H x 3/4 x 1-1/ H POA 2 x 3/4 x 1-1/ x 3/4 x x 3/4 x 3/ POA POA 2 x 1/2 x H POA 2 x 1/2 x 1-1/ H x 1/2 x 1-1/ H POA 2 x 1/2 x 1/ POA POA 2-1/2 x 2-1/2 x /2 x 2 x POA 2-1/2 x 2-1/2 x POA 2-1/2 x 2-1/2 x 1-1/ /2 x 2-1/2 x 1-1/ POA 2-1/2 x 2-1/2 x POA 2-1/2 x 2-1/2 x 3/ POA 2-1/2 x 2-1/2 x 1/ /2 x 2 x 2-1/ /2 x 2 x POA 2-1/2 x 2 x 1-1/ POA 2-1/2 x 2 x 1-1/ POA 2-1/2 x 2 x /2 x 2 x 3/ POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 13

14 Cast Iron Pipe Fittings Class 125 and 250 Schedule No Effective May 23, 2011 Cast Iron Reducing Tees (continued) Fig. 25 Piece 2-1/2 x 2 x 1/ /2 x 1-1/2 x 2-1/ /2 x 1-1/2 x /2 x 1-1/2 x 1-1/ POA 2-1/2 x 1-1/2 x 1-1/ /2 x 1-1/2 x 1/ POA /2 x 1-1/4 x 2-1/ POA 2-1/2 x 1-1/4 x POA 2-1/2 x 1-1/4 x 1-1/ /2 x 1-1/4 x /2 x 1 x 2-1/ /2 x 1 x /2 x 1 x 1-1/ /2 x 1 x POA POA 2-1/2 x 1 x 3/ POA POA 2-1/2 x 3/4 x 2-1/ /2 x 3/4 x /2 x 1/2 x 2-1/ x 2 x x 2 x 2-1/ H POA 2 x 1-1/2 x 2-1/ x 1-1/4 x 2-1/ x 1 x 2-1/ x 3/4 x 2-1/ x 3 x 2-1/ POA 3 x 3 x POA 3 x 3 x 1-1/ POA 3 x 3 x 1-1/ POA 3 x 3 x POA 3 x 2-1/2 x x 2-1/2 x 2-1/ POA 3 x 2-1/2 x POA 3 x 2-1/2 x 1-1/ POA 3 x 2 x x 2 x 2-1/ POA 3 x 2 x POA 3 x 2 x 1-1/ x 3 x 1/ POA POA 3 x 3 x 3/ POA POA 3 x 1-1/2 x x 1-1/2 x x 2-1/2 x 1-1/ POA POA 3 x 1-1/2 x 1-1/ POA 3 x 1-1/4 x x 1-1/4 x POA 3 x 1 x x 1 x POA POA 3-1/2 x 3 x 3-1/ ,375 POA POA 3-1/2 x 3 x ,494 POA POA 3-1/2 x 3 x 2-1/ POA POA 3-1/2 x 3 x 1-1/ ,222 POA POA 3-1/2 x 1 x 3-1/ ,030 POA POA 3 x 3 x 3-1/ ,462 POA POA 3 x 3 x ,280 POA POA 4 x 4 x 3-1/ ,775 POA POA 4 x 4 x , x 4 x 2-1/ , POA 4 x 4 x , x 4 x 1-1/ , POA Cast Iron Reducing Tees (continued) Fig. 25 Piece 4 x 3-1/2 x , x 3 x , POA 4 x 2-1/2 x , POA 4 x 2 x , x 4 x 3/ ,058 POA POA 4 x 4 x POA POA 4 x 4 x 1-1/ POA POA 4 x 1-1/2 x , x 1 x , x 3-1/2 x 2-1/ ,344 POA POA 4 x 3 x , x 3 x 2-1/ , x 3 x , x 3 x 1-1/ ,058 POA x 2-1/2 x 2-1/ , POA 4 x 2-1/2 x ,096 POA POA 4 x 2 x x 5 x ,743 POA POA 5 x 5 x 2-1/ ,093 POA POA 5 x 5 x ,000 POA POA 5 x 5 x ,383 POA POA 6 x 6 x ,670 POA POA 6 x 6 x ,043 POA POA 6 x 6 x ,523 POA POA Cast Iron Reducing Tees Fig. 25 Class /4 x 1-1/4 x 3/ POA POA 1-1/2 x 1-1/2 x 3/ POA POA 2 x 2 x 3/ POA POA 2 x 2 x 1-1/ POA POA Cast Iron Crosses Fig. 30A 1/ / POA H / H POA 1-1/4 x / H /2 x 1-1/ POA POA 1-1/2 x 1-1/4 x POA POA 1-1/2 x 1-1/4 x 1 x POA POA 1-1/2 x /2 x 1 x 1 x POA POA H x x 1-1/ POA POA 2 x 1-1/ POA POA 2 x 1-1/2 x 1 x POA POA ,950 POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 14 Company Name P.O. No. Date

15 Cast Iron Pipe Fittings and Flanges Class 125 Schedule No Piece Piece Cast Iron Reducers Fig. 29 Cast Iron Pipe Caps Fig. 30 3/4 x 1/ POA 1 x 3/ H x 1/ H /4 x H POA 1-1/4 x 1/ POA POA 1-1/4 x 3/ H /2 x 1/ POA POA 1-1/2 x 3/ H POA POA 1-1/2 x H /2 x 1-1/ H x 1-1/ H POA 2 x 1-1/ H x H x 3/ H POA 2 x 1/ H POA 2-1/2 x POA 2-1/2 x 1-1/ POA 3 x POA 3 x 1-1/ POA 3 x 2-1/ POA POA 4 x POA POA 4 x 2-1/ POA POA 4 x POA POA 6 x ,335 POA POA 2-1/ POA 3-1/2 6 6 POA , , ,825 POA POA Cast Iron Companion Flanges Class 125 Screwed Flanges Fig. 20 1x4-1/ H /4x4-5/ H /2x H x /2x x7-1/ x ,188 H x , x , x13-1/ , x , POA Cast Iron eccentric Reducers Fig. 29E 3/4 x 1/ POA 1 x 3/ POA 1 x 1/ POA 1-1/4 x POA 1-1/4 x 3/ POA 1-1/4 x 1/ POA 1-1/2 x 1-1/ POA 1-1/2 x POA 1-1/2 x 3/ POA 1-1/2 x 1/ POA 2 x 1/ POA POA 2 x 3/ POA POA 2 x POA 2 x 1-1/ POA 2 x 1-1/ POA 2-1/2 x POA POA 2-1/2 x 1-1/ POA POA 2-1/2 x 1-1/ POA POA 2-1/2 x POA POA 3 x POA POA 3 x 1-1/ POA POA 3 x 1-1/ POA POA 3 x POA POA 3 x 2-1/ POA POA 4 x 1-1/ POA POA 4 x 1-1/ POA POA 4 x POA POA Cast Iron Reducing Flanges Class 125 Fig. 71 3/4x x x /4x /2x /2x x x7-1/ /4x7-1/ /2x7-1/ x7-1/ /2x7-1/ x8-1/ ,000 POA POA 1-1/2x , x , /2x , x , /2x , x , /2x , x , x , /2x , x , /2x , x , x , x , J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 15

16 Cast Iron Flanges and Elbows Schedule No Effective May 23, 2011 Cast Iron Reducing Flanges Class 125 (continued) Fig. 71 Piece 2x13-1/ , x13-1/ , x13-1/ , x13-1/ , x13-1/ , Cast Iron 90 Elbows Class 250 Fig. 21H Piece 3/4 bulk bulk POA 1 bulk bulk POA 1-1/4 bulk bulk POA 1-1/2 bulk bulk POA 2 bulk bulk POA Cast Iron Blind Flanges Class 125 Fig /4 x 4-5/ POA POA 1-1/2 x x 4-1/ x /2 x x 7-1/ x , x , x , x 13-1/ , x , Cast Iron Floor Flanges Class 125 Fig. 15 3/ H POA 1/ H / H H / H / H H POA POA POA Cast Iron Flange Unions Class 125 Fig. 14 1/ POA 3/ POA POA 1-1/ POA 1-1/ / , / , , , , , POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 16 Company Name P.O. No. Date

17 Cast Iron Drainage Fittings Schedule No Cast Iron Drainage Short Turn 90 Elbows Class 250 Fig. 31 Piece 1/ POA POA 3/ POA POA POA POA 1-1/ POA POA 1-1/ POA POA POA POA 2-1/ POA POA Cast Iron Straight Tees Class 250 Fig. 24 3/ POA POA 1/ POA POA 3/ POA POA POA POA 1-1/ POA POA 1-1/ POA POA POA POA 2-1/ ,423 POA POA Cast Iron Drainage Short Turn 90 Elbows Fig / , /2 x 1-1/ POA POA 2x1-1/ H POA Long Turn 90 Elbows Fig / H Short Turn 45 Elbows Fig. 32 Piece 1-1/ / , Long Turn 45 Elbows Fig / POA H Short Turn 22-1/2 Elbows Fig / Short Turn 11-1/4 Ells Fig / POA Street 90 Elbows Fig / Street 45 Elbows Fig / Extra Long Turn 90 Elbows Fig / POA Short Turn 60 Elbows Fig / POA POA J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory Company Name P.O. No. Date page 17

18 Cast Iron Drainage Fittings Schedule No Effective May 23, 2011 Piece Piece Drainage Tees Fig. 38 Short Turn 45 Y Branches Fig / x1-1/ H Short Turn 90 Tys Fig / , x1-1/ x1-1/2x1-1/ POA 2x1-1/2x POA Long Turn 90 Tys Fig / H x 1-1/ x 1-1/2 x 1-1/ / ,345 POA , x 1-1/2 x 1-1/ POA 2 x 2 x 1-1/ POA 4 x , Double 90 Y Branches Fig / x 1-1/ P Trap With Cleanout Fig / P Trap Without Drain Fig / J Preceding List Indicates Available In Quantity From Blossburg Factory H Preceding List Indicates Available In Quantity Only From Blossburg Factory page 18 Company Name P.O. No. Date