Air Preparation Units Parker-Watts General Line FRL, Hi-Flow FRL & Desiccant Dryers

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding ir Preparation Units Parker-Watts General Line FRL, Hi-Flow FRL & esiccant ryers atalog 7-

2 atalog 7- Warnings, Offer of Sale ir Preparation Units! UTION: Polycarbonate bowls, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor temperatures outside of the rated range. s with most plastics, some chemicals can cause damage. Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types. Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resist the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. onsult the factory for specific recommendations where these conditions exist. TO LN POLYRONT OWLS US MIL SOP N WTR ONLY! O NOT use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic. Metal bowl guards are recommended for all applications.! UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. WRNING FILUR OR IMPROPR SLTION OR IMPROPR US OF TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N US TH, PRSONL INJURY N PROPRTY MG. This document and other information from Parker Hannifin orporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin orporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale. opyright -, Parker Hannifin orporation. ll Rights Reserved.! Parker Hannifin orporation

3 atalog 7- Table of ontents ir Preparation Units General Information - Particulate & oalescing Filters...- Particulate Filters Minature Particulate Filters...-7 ompact Particulate Filters Standard Particulate Filters...- Hi-Flow Particulate Filters...-9 oalescing Filters Miniature oalescing Filters...- ompact oalescing Filters...- Standard oalescing Filters...-7 Hi-Flow oalescing Filters...8- ulk Liquid Separators...- esiccant ryers...-7 General Information - Regulators Regulators Miniature Regulators...-9 conomy Regulators...- ompact Regulators...- Standard Regulators...-7 Hi-Flow Regulators...8- Pilot Operated Regulators...-7 General Information - Filter / Regulators Filter / Regulators Miniature Filter / Regulators ompact Filter / Regulators Standard Filter / Regulators General Information - Lubricators Lubricators Miniature Mist Lubricators ompact Micro-Mist Lubricators Standard Micro-Mist Lubricators Standard Mist Lubricators Hi-Flow Mist Lubricators ombinations Miniature ombinations ompact & Standard ombinations...- Safety Guide...-7 Offer of Sale... 8 Parker Hannifin orporation

4 atalog 7- General Information ir Preparation Units Particulate and oalescing Filters Particulate and oalescing Filters Filtration The average -hp compressor handles four million cubic inches of air per hour. This air can contain billions of contaminating particles. t high concentration and high speed, these particles can be extremely harmful. They block orifices, erode components, and clog clearances between moving parts. In addition, when ambient air is drawn into a compressor, it can, depending on weather conditions, have relative humidity up to percent. s air is compressed and cooled, some water vapor condenses out as free water, and even with a compressor aftercooler, some moisture is swept downstream into the air system. This may result in rusted pneumatic tools and components, contaminated lubricants, and frozen air lines during low temperature periods. Other types of foreign matter in air lines include: impurities generated within the air line, such as wear particles, pipe scale and rust; construction and assembly debris; and contaminants introduced into the air system during maintenance or through leakage passages. ll these contaminants, which are of a size to cause air stream problems, should be removed by the filter. Water vapor, which is a gas, is not a contaminant in pneumatic systems until it condenses. How to Select the Proper Filter Filter element rating is the prime selection criterion. This rating must match the requirements of all downstream components. Next, the flow capacity and pressure rating of the filter should be considered. Finally, port size should match system piping to avoid unnecessary pressure drops through restricting adapters. owl material and the type of drain for the application are other choices to be made. The first step in choosing a filter is to determine the filtration requirements of the most critical components used in that system. ontamination particle size is measured in micrometers. micrometer is one millionth of a meter or.9 inches. Frequently, micrometer is abbreviated as micron or symbolized by the Greek letter µ. Particle-removing filter elements are rated according to the particle size they will trap. For most industrial applications, filter elements rated at microns are adequate. When necessary, filtration as low as microns or finer can be provided. Remember, however, that finer filtration increases the pressure drop through the element. s micron size rating varies, so does the size and type of filter. Most oils entrained in a compressed air stream are in the form of tiny mist or aerosol droplets which can pass through a standard industrial filter element. If it is necessary to remove these aerosols, an oil-removal type coalescing filter can be used. The sub-micron oil particles which escape an oil-removal filter should have no detrimental effect on industrial pneumatic components. ut if these particles must be removed for applications such as spray painting, a coalescing type element should be used. The inexact nominal filter element rating indicates that most particles that size or larger will be trapped. The absolute rating indicates that all particles that size or larger will be trapped. Filter onstruction Most pneumatic filters consist of two basic elements: a die-cast body, into which the inlet and outlet piping is connected, and a sealed removable bowl which contains collected contaminants. The bowl is fitted with a drain mechanism to remove liquids before they rise to the baffle level. The drain system usually operates while the filter is under pressure, but the unit must be exhausted to remove the bowl for cleaning and element service. The piping need not be disturbed Generally a transparent bowl is the most convenient because it provides easy visual inspection of the sump level. However, hostile environment, higher pressure, or higher temperature may require a metal bowl for safety. The most common plastic used for bowls is polycarbonate. This material performs satisfactorily for air pressures below PSIG and temperatures between and F. Parker offers polyethylene bowl guards for added safety. s the pressure or temperature requirement increases, you may have to specify a metal bowl with sight gauge. For extreme conditions, it is recommended that the sight gauge be eliminated. (Please refer to the individual model descriptions for specifications on bowls.) Thus, the environment determines the choice of bowl. Polycarbonates offer great strength and visibility, but can be attacked by certain chemicals. Metal bowls offer the highest pressure and temperature rating, and provide superior protection when installed in an environment containing chemicals that are incompatible with polycarbonate. Filter Operation When pressurized air enters a typical filter body. The curved inlet and deflector direct the incoming air in a downward whirling pattern. entrifugal force hurls the larger solid and liquid water particles outward where they collect on the inner surface of the filter bowl. The particles spiral down past a baffle into a quiet chamber. The baffle prevents turbulent air in the upper bowl from re-entraining liquid contaminants and carrying them downstream. Then the dry, cleaner air follows a convoluted path through the filter element, where finer solid particles are filtered out. Finally, filtered air passes up the center of the element and out the discharge port. Parker Hannifin orporation

5 atalog 7- General Information ir Preparation Units Particulate and oalescing Filters Particulate and oalescing Filters Warning! The plastic material used to manufacture the plastic bowls, and the sight gauge on metal bowls, may be attacked by certain chemicals. o not use this filter on systems with air supplied by a compressor lubricated with synthetic oils or oils containing phosphate esters or chlorinated hydrocarbons. These oils can carry over into the air lines and chemically attack and possibly rupture the bowl or sight gauge. lso, do not expose the bowl or sight gauge to materials such as carbon tetrachloride, trichlorethylene, acetone, paint thinner, cleaning fluids, or other harmful materials, for they too will cause the plastic to craze and/or rupture. For use in environments where these, or any, chemicals may be present, consult the factory for approval. oalescing Filters These high-efficiency filters operate on a somewhat different principle than particulate air filters. The key difference is in the element, where a fiber network is narrowly spaced to trap smaller contaminants. The special fibers hold any liquid particle which contacts them. Pre-filtered ( particulate filter must be used prior to a coalescing filter) air enters the cylindrical element at the center. s it flows through the element, particles are captured by three different mechanisms: direct interception as particles impinge on the fibers; inertial impaction as particles are thrown against fibers by the turbulent air stream; and diffusion as smaller particles vibrate with rownian movement to collide with fibers and other particles. s a result, coalescing elements can capture particles smaller than the nominal size of the flow passages through the element. ollected liquid migrates to the crossing points of the fibers where larger drops form or coalesce. Pressure differential through the element then forces these drops to the downstream surface of the element where they gravitate downward to the sump. The filtered air then exits through the outlet port. It is very important that the air be pre-filtered, as larger contaminants tend to block the passages between fibers, reducing the efficiency of the coalescing element. ody O-Ring Flange Ring eflector Shroud Retaining Rod Filter lement Pressure Plate affle ssembly Sight Gauge owl ssembly rain Particulate Filters Pop-Up Indicator Plug ody Flange Ring O-Ring Retaining Rod Filter lement Sight Gauge affle ssembly owl ssembly utomatic rain oalescing Filters Parker Hannifin orporation

6 atalog 7- Miniature F Series Miniature Filters /8 & / Inch Ports F Filters Miniature Features Twist rain utomatic rain xcellent water removal efficiency Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation asily disassembled for servicing without the use of tools Micron element standard Interchangable twist and utomatic Pulse rain automatic pulse drains High flow: /8" SFM /" SFM ccepts /8" Tubing istance Required F To Remove ll owls Regardless Of rain Option Port NPT Size Twist rain utomatic Pulse rain Poly owl /8" F* F* /" F* F* Metal owl without Sight Gauge /8" F* F7* /" F* F7* Standard part numbers shown bold. For other models refer to ordering information below. For polycarbonate bowl see aution on page inside cover. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. F Filter imensions.9 ().8 (97). (8). (9).87 (99) F. ().9 (). (7) Inches (mm) With utomatic Pulse rain. Ordering Information F * /8 Inch / Inch owl Options Polycarbonate owl Twist rain utomatic Pulse rain Metal owl Twist rain 7 utomatic Pulse rain lements Micron Micron Z dsorber ngineering Level * Will be ntered at Factory Port Type lank NPT SPP SPT OL ITMS R MOST POPULR. Parker Hannifin orporation

7 atalog 7- Technical Specifications F F Series, /8 & / Inch Ports ir Line Filters Technical Information Pressure rop - bar Pressure rop - PSIG Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG Flow haracteristics F* /8 Inch Ports Flow - SFM Pressure rop - bar Pressure rop - PSIG Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG Flow haracteristics F* / Inch Ports Flow - SFM Flow - dm /s n Flow - dm /s n! UTION: Polycarbonate bowls and sight dome, being transparent and tough, are ideal for use with Filters and Lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact blow, nor temperatures outside of the rated range. s with most plastics, some chemicals can cause damage. Polycarbonate bowls and sight dome should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols. They should not be used in air systems where compressors are lubricated with fire-resistant fluids such as phosphate ester and di-ester types. Metal bowls are recommended where ambient and/or media conditions are not compatible with polycarbonate bowls. Metal bowls resist the action of most such solvents, but should not be used where strong acids or bases are present or in salt laden atmospheres. onsult the factory for specific recommendations where these conditions exist. TO LN POLYRONT OWLS US MIL SOP N WTR ONLY! O NOT use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which are damaging to this plastic. Metal bowl guards are recommended for all applications. F Filter Kits & ccessories owl Kits Poly owl utomatic Pulse rain...ps8 Twist rain... PS Metal owl utomatic Pulse rain... PS Twist rain... PS7 Filter lement Kits Micron...PS Micron... PS Micron artridge Kit...PS7 dsorber...ps Mounting racket Kit... PS7 Specifications utomatic Pulse rain Tube arb... /8 Inch owl apacity... Ounce Port Threads... /8, / Inch Pressure & Temperature Ratings Polycarbonate owl... to PSIG ( to. bar) F to F ( to ) Metal owl... to PSIG ( to 7. bar) F to 7 F ( to 8 ) utomatic Pulse rain... to PSIG (.7 to 7. bar) at F ( ) or less Weight... lb. (.8 kg) Materials of onstruction ody...zinc owls...transparent Polycarbonate Metal (Zinc) owl w/o Sight Gauge eflector, lement Holder & affle...plastic rains Twist rain ody & Stem...Plastic Seals... Nitrile utomatic Pulse rain Piston & Seals... Nitrile Stem, Seat, daptor & Washers... luminum Filter lements Micron (Standard)...Plastic Micron (Optional)...Plastic dsorber (Optional)...ctivated harcoal Seals... Nitrile Parker Hannifin orporation

8 atalog 7- Miniature F Series Miniature Filters /8 & / Inch Ports F Filters Miniature Features xcellent water removal efficiency Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation asily disassembled for servicing without the use of tools Interchangeable twist and automatic pulse drains High flow: SFM I N ia. istance Required F To Remove ll owls Regardless Of rain Option Port NPT Size Twist rain utomatic Pulse rain Polycarbonate owl /8" F-H F-HS /" F-H F-HS Metal owl without Sight Gauge /8" F-H F-HS /" F-H F-HS Standard part numbers shown bold. For other models refer to ordering information below. For polycarbonate bowl see aution on page inside cover. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop.. (9.7). (9) F.7 (77) F Filter imensions.8 (9.). (.) F.7 (77) Inches (mm) With Metal owl.78 (9). (.) Ordering Information F H /** Port Threads NPT G SPP /8 Inch / Inch owl Polycarbonate Metal lements G Micron H Micron rains and Options lank Manual Twist rain S utomatic Pulse rain U Semi-uto rain X No Internal Parts X* Polyurethane owl X Fluorocarbon Seals X7 With Mounting racket ngineering hange esignator Will be entered at factory. * dd." to overall length. OL ITMS R MOST POPULR. Parker Hannifin orporation

9 atalog 7- Technical Specifications F F Series, /8 & / Inch Ports ir Line Filters Technical Information Primary Pressure - bar.7 bar. bar. bar.9 bar Primary Pressure - PSIG PSIG PSIG 7 PSIG PSIG Pressure rop - bar... Pressure rop - PSIG Flow haracteristics F /8 Inch Ports Inch Ports Flow - SFM Flow - dm /s n F Filter Kits & ccessories owl Kits Metal ()...KY Metal () with utomatic Pulse rain...ksy Polycarbonate ()...KY Polycarbonate () with utomatic Pulse rain... KSY rain Kits utomatic Pulse rain... RKSY Manual Twist rain... SY7- Semi-utomatic Overnight rain...s7 (rains automatically under zero pressure) Filter lement Kits Micron (ll)... KVY Micron (ll)... KY Mounting racket Kit... Must be Ordered with Filter ( ) = owl Type Specifications owl apacity... Ounce Port Threads... /8, / Inch Pressure & Temperature Ratings Polycarbonate owl... to PSIG ( to. bar) F to F (. to ) Metal owl... to PSIG ( to. bar) F to 8 F (. to 8. ) With utomatic Pulse rain... 7 PSIG Max. Press. (.9 bar) Weight Polycarbonate owl.... lb. (. kg) / Unit 7 lb. (.8 kg) / -Unit Master Pack Metal owl.... lb. (. kg) / Unit lb. (. kg) / -Unit Master Pack Materials of onstruction ody...luminum owls...polycarbonate Metal (Zinc) rains...rass Filter lements... Polypropylene Seals...Nitrile 7 Parker Hannifin orporation

10 atalog 7- ompact F Series ompact Filters /, /8 & / Inch Ports F Filters ompact Features Twist rain utomatic rain xcellent water removal efficiency Unique deflector plate and shroud creates a swirling of the air stream ensuring maximum water and dirt separation Large filter element surface guarantees low pressure drop and increased element life Optional automatic float drain available Shown with recommended metal bowl guard High flow: /" SFM /8" 8 SFM /" 8 SFM istance Required F To Remove ll owls Regardless Of rain Option Port Size Twist rain Poly owl / Metal Guard NPT utomatic Float rain /" F-* F-* /8" F-* F-* /" F-* F-* Metal owl / Sight Gauge /" F-* F-8* /8" F-* F-8* /" F-* F-8*.8 (7).7 () F Filter imensions.7 (7). (8). ().7 (9) Inches (mm) With utomatic Float rain.9 () F. (7) Standard part numbers shown bold. For other models refer to ordering information below. For polycarbonate bowl see aution on inside cover. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. Ordering Information F * Port Threads NPT G* SPP * / & /8 inch meet ISO 79- Standard. / Inch /8 Inch / Inch Polycarbonate owl Metal owl Guard / Twist rain Metal owl Guard / uto Float rain owl Options Metal owl Twist rain Sight Gauge / Twist rain 7 uto Float rain 8 Sight Gauge / uto Float rain lement Micron ngineering Level * Will be ntered at Factory. Options lank None OL ITMS R MOST POPULR. 8 Parker Hannifin orporation

11 atalog 7- Technical Specifications F F Series, /, /8 & / Inch Ports ompact Filters Technical Information 7 Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG 7 Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG Pressure rop - bar.... Pressure rop - PSIG Flow haracteristics F-* / Inch Ports 7 8 Flow - SFM Pressure rop - bar.... Pressure rop - PSIG Flow haracteristics F-* /8 Inch Ports Flow - SFM Flow - dm /s n 7 Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG Flow - dm /s n Pressure rop - bar.... Pressure rop - PSIG 7 8 Flow - SFM Flow haracteristics F-* / Inch Ports 9 Flow - dm /s n F Filter Kits & ccessories owl Guard Kit...PS7 owl Kits Poly owl utomatic Float rain...ps7 Twist rain...ps7 Polycarbonate () (Old F)... KY Metal owl utomatic Float rain...ps7 Twist rain...ps7 Sight Gauge / utomatic Float rain...ps7 Sight Gauge / Twist rain...ps7 Metal with Sight Gauge (W) (Old F)...KWY PI Replacement Kit...PS78 rain Kits utomatic Float rain...ps Twist rain...ps Internal uto (ll) (Old F)...SM Manual Twist (ll) (Old F)...SY7- Filter lement Kits Micron...PS7. Micron (,W) (Old F)... KVY. Micron (,W) (Old F)... KY Mounting racket Kit...PS7 Mounting racket Kit (Old F)...(ll) SF-7 Sight Gauge Kit...PS9 Specifications owl apacity... Ounces Sump apacity...7 Ounces Port Threads.../, /8, / Inch Pressure & Temperature Ratings Without ifferential Pressure Indicator: Polycarbonate owl to PSIG ( to. bar) F to F ( to ) Metal owl to PSIG ( to 7. bar) F to 7 F ( to 8 ) With ifferential Pressure Indicator: to PSIG ( to. bar) F to F ( to ) utomatic Float rain to PSIG (. to 7. bar) Weight.... lb. (. kg) Materials of onstruction ody... Zinc owls...transparent Polycarbonate or Metal (Zinc) With or Without Sight Gauge owl Guards... Steel ollar...plastic eflector, Shroud & affle...plastic rains Twist rain ody & Nut...Plastic utomatic Float rain Housing, Float...Plastic Seals... Nitrile Springs, Push Rod...Stainless Steel Filter lements Micron (Standard)...Plastic dsorber (Optional)... ctivated harcoal Seals... Nitrile Sight Gauge... Nylon 9 Parker Hannifin orporation

12 atalog 7- Standard F Series Standard Filters / Inch Ports F Filters Standard Features Twist rain utomatic rain xcellent water removal efficiency Unique deflector plate and shroud creates a swirling of the air stream ensuring maximum water and dirt separation Large filter element surface guarantees low pressure drop and increased element life Optional automatic float drain available Shown with recommended metal bowl guard High flow: /" SFM istance Required F To Remove ll owls Regardless Of rain Option Port Size Twist rain Poly owl / Metal Guard NPT utomatic Float rain /" F-* F-* Metal owl / Sight Gauge /" F-* F-8* Standard part numbers shown bold. For other models refer to ordering information below. For polycarbonate bowl see aution on inside cover. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop.. (8) 7. (78) F Filter imensions. (8) 7.7 (9).7 (8) 7.7 (9) Inches (mm) With utomatic Float rain.97 (77) F.7 (7) Ordering Information F * Port Threads NPT G SPP / Inch owl Options Polycarbonate owl Metal owl Metal owl Guard / Twist rain Metal owl Guard / uto Float rain Twist rain Sight Gauge / Twist rain 7 uto Float rain 8 Sight Gauge / uto Float rain lement Micron ngineering Level * Will be ntered at Factory. Options lank None OL ITMS R MOST POPULR. Parker Hannifin orporation

13 atalog 7- Technical Specifications F F Series, / Inch Ports Standard Filters Technical Information 7 Primary Pressure - bar. bar. bar. bar Primary Pressure - PSIG PSIG 9 PSIG PSIG Pressure rop - bar.... Pressure rop - PSIG 8 Flow - SFM Flow haracteristics F-* / Inch Ports 8 7 Flow - dm /s n 8 9 F Filter Kits & ccessories owl Guard Kit...PS8 owl Kits Poly owl utomatic Float rain... PS8 Twist rain... PS8 Polycarbonate with Plastic owl Guard () (Old F)...K Metal owl utomatic Float rain... PS8 Twist rain... PS8 Sight Gauge / utomatic rain... PS8 Sight Gauge / Twist rain... PS8 luminum () (Old F)...K Metal with Sight Gauge (W) (Old F)... KW PI Replacement Kit... PS78 rain Kits utomatic Float rain... PS Twist rain... PS xternal uto (,W) (Old F)...S xternal uto () (Old F)...S Internal uto (ll) (Old F)... SM Manual Twist (ll) (Old F)... SY7- Filter lement Kits Micron... PS8 Micron (,W) (Old F)...KV Micron (,W) (Old F)...K Mounting racket Kit...PS8 Mounting racket Kit (Old F)... (ll) SF-7 Sight Gauge Kit...PS9 Specifications owl apacity Ounces Sump apacity....8 Ounces Port Threads... /, / Inch Pressure & Temperature Ratings Without ifferential Pressure Indicator: Polycarbonate owl to PSIG ( to. bar) F to F ( to ) Metal owl to PSIG ( to 7. bar) F to 7 F ( to 8 ) With ifferential Pressure Indicator: to PSIG ( to. bar) F to F ( to ) utomatic Float rain to PSIG (. to 7. bar) Weight... lb. (. kg) Materials of onstruction ody...zinc owls... Transparent Polycarbonate Metal (Zinc) With or Without Sight Gauge owl Guards... Steel ollar...plastic or Metal eflector, Shroud & affle...plastic rains Twist rain ody & Nut... Plastic utomatic Float rain Housing, Float... Plastic Seals...Nitrile Springs, Push Rod... Stainless Steel Filter lements Micron (Standard)... Plastic dsorber (Optional)... ctivated harcoal Seals... Nitrile Sight Gauge... Nylon Parker Hannifin orporation

14 atalog 7- Hi-Flow F Series Hi-Flow Filters / & Inch Ports F Filters Hi-Flow Manual rain utomatic rain Features xcellent water removal efficiency For heavy duty applications with minimum pressure drop requirement Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation Large filter element surface guarantees low pressure drop and increased element life micron filter element standard, micron available Metal bowl with sight gauge standard Twist drain as standard, optional auto drain Large bowl capacity Optional high capacity bowl(s) available IN OUT F High flow: /" 7 SFM " SFM Port NPT Size Twist rain utomatic Pulse rain Metal owl / Sight Gauge - oz. /" F-WJ F-WJR " F-8WJ F-8WJR Metal owl without Sight Gauge - oz. /" F-J F-JR " F-8J F-8JR Standard part numbers shown bold. For other models refer to ordering information below. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. F Filter imensions F F-W, F-8W.9 () 7.88 () 8.7 () F-, F-8.9 () inches (mm). (8).9 (). (). ().8 ().8 (). (). () Ordering Information F W J /** Port Threads NPT G SPP / Inch 8 Inch owl oz. Large apacity Metal without Sight Gauge W oz. Metal with Sight Gauge lement G Micron J Micron rains and Options lank Manual Twist rain Q xternal Heavy uty uto rain R Internal uto rain ngineering Level * Will be ntered at Factory. OL ITMS R MOST POPULR. Parker Hannifin orporation

15 atalog 7- Technical Specifications F F Series, / & Inch Ports Hi-Flow Filters Technical Information Pressure rop - bar... Pressure rop - PSIG Primary Pressure - bar Primary Pressure - PSIG 7 Flow haracteristics F-WJ /-inch Port Flow - SFM Pressure rop - bar... Pressure rop - PSIG Primary Pressure - bar Primary Pressure - PSIG 7 Flow haracteristics F-8WJ -inch Port Flow - SFM 8 Flow - dm /s n 8 Flow - dm /s n Q Option xternal Heavy uty uto rain S / S For heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain ( Q option) should be used. rain (/" NPTF) Float (Inside owl) onnection Through owl (/8" NPSM) Manual Push utton rain (Outside owl) F Filter Kits & ccessories owl Kits luminum ()... K Zinc with Sight Gauge (W)...KW rain Kits xternal uto ()... S xternal uto (W)... S Internal uto (ll)... SM Manual (ll)... SY7- Semi-utomatic Overnight rain...s7 (rains automatically under zero pressure) Filter lement Kits Micron (ll)...k Micron (ll)... KV Mounting racket Kit (Pair or Kits Pipe Mounted rackets needed) (/" Unit)... SW7 (" Unit)...SW7 Repair Kits eflector, affle ssembly, and Retaining Rod (,W)... RK xternal uto rain (ll)... RK Internal uto rain (ll)... RKM Metal owl Sight Gauge (W)... RKW Specifications owl apacity luminum owl ()... Ounces Zinc owl (W)... Ounces Port Threads... /, Inch ( ) = owl Type Pressure & Temperature Ratings luminum owl ()... to PSIG ( to. bar) F to F (. to. ) Zinc (W)... to PSIG ( to 7. bar) F to F (. to. ) With Internal uto rain (R)... to 7 PSIG (. to.9 bar) F to F (. to ) With xternal uto rain (Q)... to PSIG ( to 7. bar) F to F (. to. ) Weight luminum owl ()... 7 lb. (.8 kg) / Unit 8 lb. (.7 kg) / -Unit Master Pack Zinc owl (W).... lb. (.8 kg) / Unit lb. (. kg) / -Unit Master Pack Materials of onstruction ody...zinc owls ()...luminum without Sight Gauge (W)... Zinc with Sight Gauge rain Manual Twist & Overnight...rass Housing R...cetal Housing Q... ronze Filter lements Micron (Standard)...Polypropylene Micron (Optional)...Polypropylene Seals...Nitrile Sight Gauge...Nylon Parker Hannifin orporation

16 atalog 7- Hi-Flow F Series Hi-Flow Filters -/ & -/ Inch Ports F Filters Hi-Flow Manual rain utomatic rain Features xcellent water removal efficiency For heavy duty applications with minimum pressure drop requirement Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation IN OUT F Large filter element surface guarantees low pressure drop and increased element life micron filter element standard, micron available Metal bowl with sight gauge standard Twist drain as standard, optional auto drain Large bowl capacity Optional high capacity bowl(s) available High flow: -/" 9 SFM -/" SFM Port NPT Size Twist rain utomatic Pulse rain Metal owl / Sight Gauge - oz. -/" F-WJ F-WJR -/" F-WJ F-WJR Metal owl without Sight Gauge - oz. -/" F-J F-JR -/" F-J F-JR Standard part numbers shown bold. For other models refer to ordering information below. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. F Filter imensions F F-W, F-W.9 () 8.8 (8) 9. () F-, F-.9 () inches (mm). (9).9 ().9 ().9 ().8 (.).8 (.). (.). (.) Ordering Information F W J /** Port Threads NPT G SPP -/ Inch -/ Inch owl oz. Large apacity Metal without Sight Gauge W oz. Metal with Sight Gauge lement G Micron J Micron rains and Options lank Manual Twist rain Q xternal Heavy uty uto rain R Internal uto rain ngineering Level * Will be ntered at Factory. OL ITMS R MOST POPULR. Parker Hannifin orporation

17 atalog 7- Technical Specifications F F Series, -/ & -/ Inch Ports Hi-Flow Filters Technical Information Primary Pressure - bar Primary Pressure - PSIG 7 Primary Pressure - bar Primary Pressure - PSIG 7. Pressure rop - bar.. Pressure rop - PSIG Flow haracteristics F-WJ -/-inch Port Flow - SFM 8 8 Flow - dm n /s Pressure rop - bar... Pressure rop - PSIG Flow haracteristics F-WJ -/-inch Port Flow - SFM Flow - dm n /s Q Option xternal Heavy uty uto rain S / S For heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain ( Q option) should be used. F Filter Kits & ccessories owl Kits luminum ()... K Zinc with Sight Gauge (W)... KW rain Kits xternal uto ()...S xternal uto (W)...S Internal uto (ll)... SM Manual (ll)... SY7- Semi-utomatic Overnight rain...s7 (rains automatically under zero pressure) Filter lement Kits Micron (ll)...k Micron (ll)...kv Repair Kits eflector, affle ssembly, and Retaining Rod (ll)... RK xternal uto rain (ll)... RK Internal uto rain (ll)... RKM Metal owl Sight Gauge (W)...RKW Specifications owl apacity luminum ()... Ounces Zinc (W)... Ounces Port Threads...-/, -/ Inch ( ) = owl Type rain (/" NPTF) Float (Inside owl) onnection Through owl (/8" NPSM) Manual Push utton rain (Outside owl) Pressure & Temperature Ratings luminum owl ()... to PSIG ( to. bar) F to F (. to. ) Zinc (W)... to PSIG ( to 7. bar) F to F (. to. ) With Internal uto rain (R)... to 7 PSIG (. to.9 bar) F to F (. to ) With xternal uto rain (Q)... to PSIG ( to 7. bar) F to F (. to. ) Weight luminum owl () lb. (.9 kg) / Unit lb. (. kg) / -Unit Master Pack Zinc owl (W)... 7 lb. (.8 kg) / Unit 8 lb. (.7 kg) / -Unit Master Pack Materials of onstruction ody...zinc owls ()...luminum without Sight Gauge (W)... Zinc with Sight Gauge rain Manual Twist & Overnight...rass Housing R...cetal Housing Q... ronze Filter lements Micron (Standard)...Polypropylene Micron (Optional)...Polypropylene Seals...Nitrile Sight Gauge...Nylon Parker Hannifin orporation

18 atalog 7- Hi-Flow F Series Hi-Flow Filters & -/ Inch Ports F Filters Hi-Flow Manual rain utomatic rain Features xcellent water removal efficiency For heavy duty applications with minimum pressure drop requirement Unique deflector plate that creates swirling of the air stream ensuring maximum water and dirt separation Large filter element surface guarantees low pressure drop and increased element life micron filter element standard Metal bowl with sight gauge standard Twist drain as standard, optional auto drain Large bowl capacity Optional high capacity bowl(s) available F High flow: & -/" SFM Port NPT Size Twist rain utomatic Pulse rain Metal owl / Sight Gauge - oz. " F-WJ F-WJR -/" F-WJ F-WJR Metal owl without Sight Gauge - oz. " F-J F-JR -/" F-J F-JR Standard part numbers shown bold. For other models refer to ordering information below. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. F Filter imensions F F-W, F-W.9 ().8 (8). () F-, F-.9 () inches (mm). (). (). (). ().9 (8.7).9 (8.7). (.). (.) Ordering Information F W J /** Port Threads NPT G SPP Inch -/ Inch owl oz. Large apacity Metal without Sight Gauge W oz. Metal with Sight Gauge lement J Micron rains and Options lank Manual Twist rain Q xternal Heavy uty uto rain R Internal uto rain ngineering Level * Will be ntered at Factory. OL ITMS R MOST POPULR. Parker Hannifin orporation

19 atalog 7- Technical Specifications F F Series, & -/ Inch Ports Hi-Flow Filters Technical Information Primary Pressure - bar Primary Pressure - PSIG 7 Pressure rop - bar... Pressure rop - PSIG Flow haracteristics F-/ -inch Port 7 Flow - SFM 8 Flow - dm n /s Q Option xternal Heavy uty uto rain S / S For heavy duty applications where the filter is being used to remove large volumes of liquid and/or particulate matter from the airstream, the external automatic drain ( Q option) should be used. rain (/" NPTF) Float (Inside owl) onnection Through owl (/8" NPSM) Manual Push utton rain (Outside owl) F Filter Kits & ccessories owl Kits luminum ()... K Zinc with Sight Gauge (W)... KW rain Kits xternal uto ()...S xternal uto (W)...S Internal uto (ll)... SM Manual (ll)... SY7- Semi-utomatic Overnight rain...s7 (rains automatically under zero pressure) Filter lement Kits Micron (ll)...k Repair Kits eflector, affle ssembly, and Retaining Rod (ll)... RK xternal uto rain (ll)... RK Internal uto rain (ll)... RKM Metal owl Sight Gauge (W)...RKW Specifications owl apacity luminum ()... Ounces Zinc (W)... Ounces Port Threads..., -/ Inch ( ) = owl Type Pressure & Temperature Ratings luminum owl ()... to PSIG ( to. bar) F to F (. to. ) Zinc (W)... to PSIG ( to 7. bar) F to F (. to. ) With Internal uto rain (R)... to 7 PSIG (. to.9 bar) F to F (. to ) With xternal uto rain (Q)... to PSIG ( to 7. bar) F to F (. to. ) Weight luminum owl ().... lb. (.7 kg) / Unit lb. (.99 kg) / -Unit Master Pack Zinc owl (W) lb. (. kg) / Unit 9 lb. (7.9 kg) / -Unit Master Pack Materials of onstruction ody...luminum owls ()...luminum without Sight Gauge (W)... Zinc with Sight Gauge rain Manual Twist & Overnight...rass Housing R...cetal Housing Q... ronze Filter lements Micron (Standard)...Polypropylene Seals...una N Sight Gauge...Nylon 7 Parker Hannifin orporation

20 atalog 7- Hi-Flow F, F Series Hi-Flow Filters -/, & Inch Ports F, F Filters Hi-Flow Features uto rain Heavy-duty cast aluminum housings to withstand operating pressures up to PSIG* ifferential pressure indicator to eliminate the guesswork of element replacement ifferential pressure gauge available, order separately, Kit P-- Unique drain mounting plate design offers a trouble-free method for interchanging and installing external drains F High flow: -/" 8 SFM " SFM " 9 SFM * Without ifferential Pressure Indicator Max. supply pressure is PSIG (.7 bar). G Series Port Size lement Type Part Number (NPT) utomatic rain -/ micron F77P F micron F87P F micron FN7P Standard part numbers shown bold. For other models refer to ordering information below. SFM = Standard cubic feet per minute at 9 PSIG inlet and PSIG pressure drop. 7.8 (98) 8.9 (7) inches (mm) 7.7 (97) 8.88 (.) F Filter imensions.8 (7). (.) 9.7 (8) F Filter imensions.8 (88).9 (9.) 9. (78) F.88 (98.) F. (.8) G. () G. () Ordering Information F 7 7 P F 7 -/ Inch 8 Inch F N Inch owl 7 Metal without Sight Gauge, uto Float rain lement Micron ngineering Level Options N Without ifferential Pressure Indicator P* With ifferential Pressure Indicator G** With ifferential Pressure Gauge Port Threads lank NPT SPP SPT * Max. pressure rating PSIG. ** Gauge ships loose. OL ITMS R MOST POPULR. 8 Parker Hannifin orporation