CNW Catalog 2010/2011

Transcription

1 CNW Catalog 2010/2011

2 CNW Technologies GmbH is a worldwide supplier of laboratory products in the areas of sample preparation, high performance liquid chromatography (HPLC) and gas chromatography (GC). CNW products are selected from more than 100 manufacturers globally with strict quality inspection to ensure high product quality and attractive price for high-level customer satisfaction. Over 10-year experience in the laboratory product supply also allows CNW to offer the most appropriate line of products to accommodate customers needs. CNW maintains a firm commitment to bridging the laboratory product suppliers and the customers with guaranteed best service. We invite you to explore CNW Technologies. The team of CNW Technologies GmbH

3 Table of Contents Sample Preparation... 2 Solid Phase Extraction... 4 HPLC Syringe Filters and Gloves...37 Sample Prep Appplications...39 HPLC...41 HPLC Columns...42 HPLC Accessories...51 HPLC Applications...56 GC...58 GC Columns...59 Stationary Phase and Supports...75 GC Accessories...86 GC Applications...95 Syringes...97 Sample Vials What to Consider When Selecting an Autosampler Vial? Septa Selection Guide Autosampler Vials Storage Vials and EPA Vials Headspace Vials Sampling Bottles Labware Reagents Solvents for HPLC HPLC Buffers Solvents for GC residue analysis ACS Reagents Art Index

4 Sample Preparation Solid Phase Extraction... 4 SPE Columns... 4 CNWBOND C CNWBOND C2-ne... 5 CNWBOND C CNWBOND C4-ne... 6 CNWBOND C CNWBOND C8-ne... 7 CNWBOND C CNWBOND HC-C CNWBOND LC-C CNWBOND C18-ne... 9 CNWBOND CYH...10 CNWBOND PHE...10 CNWBOND Si...11 CNWBOND CN...11 CNWBOND Diol...12 CNWBOND NH CNWBOND NH 2 -ne...13 CNWBOND WAX...14 CNWBOND PSA...14 CNWBOND SAX...15 CNWBOND WCX...15 CNWBOND PRS...16 CNWBOND SCX...16 CNWBOND C8/SCX...17 CNWBOND C8/SAX...17 CNWBOND Florisil...18 CNWBOND Florisil PR...18 CNWBOND Alumina-A...19 CNWBOND Alumina-N...19 CNWBOND Alumina-B...20 CNWBOND Celite CNWBOND Coconut Charcoal...21 CNWBOND Carbon-GCB...21 CNWBOND GCB/NH CNWBOND GCB/PSA...22 CNWBOND SAX/PSA...23 CNWBOND GCB/SAX...23 CNWBOND GCB/SAX/PSA...23 CNWBOND GCB/NH 2 /Si...24 CNWBOND Na 2 SO 4 /Florisil...24 Poly-Sery HLB...24 Poly-Sery MAX...25 Poly-Sery MCX...25 Poly-Sery PSD...26 Poly-Sery XAD Dispersive SPE Products...27 SPE Tube Accessories...29

5 Empty SPE Tubes and Frits...29 SPE Tube Adapter...29 SPE Vacuum Manifolds & Accessories...30 SPE Vacuum Manifold...30 Drying Attachments Position PP Vacuum Waste Container...31 Large Volume Sampler...31 Optional Needles for Vacuum Manifold...32 Other Vacuum Manifold Components...32 SPE Disk Manifolds & Accessories...35 HPLC Syringe Filters and Gloves...37 HPLC Syringe Filters...37 Disposable Gloves...38 Disposable Powder-free Nitrile Gloves...38 Disposable Powder-free Latex Gloves...38 Solid Phase Extraction...39 Sample Prep Appplications...39

6 SPE Solid Phase Extraction 4 Sample Preparation SPE Columns Si C1 Introduction Solid Phase Extraction (SPE) is a technique widely used for sample preparation and purification or isolation. Over the last twenty years, the popularity of this technique has increased dramatically. SPE extends the lifetime of chromatographic systems and improves qualitative analysis. SPE is mainly used to extract an analyte (compound of interest) from impurities in a wide variety of matrices like biological fluids (plasma, blood and urine), water, soil, etc., to concentrate analyte of interest, or purify samples prior to the analysis. Common SPE applications: Pesticides and antibiotics in food and agricultural matrices Pharmaceutical s and metabolites in biological fluids Drugs of abuse in biological fluids Vitamins and proteins or peptide Organic compounds in water and environment SPE Columns CNW offers two series of SPE columns to our customers. CNWBOND series mainly includes the silica-bond and adsorption SPE cartridges. These products are used most widely in SPE processing. CNWBOND uses very pure and reproducible bulks to make your samples to be very clean and ready to be analyzed in the next step. Poly-Sery series is the polymer-based SPE cartridge, which includes different modified copolymer types. These products are becoming more and more popular used in modern SPE processing, because these sorbents have special properties of faster throughput, higher reproducibility, stronger retention and selectivity, more stable ph durability etc., which make your method to be easy and faster with satisfied result. To request a price quote or inquire on the feasibility of CNW manufacturing a custom SPE product, please contact us directly or local representatives. CNWBOND C1 CNWBOND C1 has the lowest hydrophobicity of all alkyl group bonded phases. Due to the single carbon functional group, the sorbent is useful in the separation of large biomolecules that have extensive hydrophobic regions, and polar compounds that are easier to be retained and eluted µm irregular shaped and acid washed silica, 60Å mean pore size, 5% carbon loading and endcapped. SPE Manifold For more information about this product, please refer to page 30. CNWBOND C1 SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs

7 SPE 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C1 SPE Bulk Packing 2.CA g 5 Si C2 CNWBOND C2-ne CNWBOND C2-ne is a non-polar sorbent with low hydrophobicity which can be used to replace C18 and C8 when compounds are retained too strongly on the C18 and C8. It is popular for the extraction of drugs from plasma and serum µm irregular shaped and acid washed silica, 60Å mean pore size, 6% carbon loading and non-endcapped. CNWBOND C2-ne SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs Sample Preparation CNWBOND C2-ne SPE Bulk Packing 2.CA g CNWBOND C4 Si C4 CNWBOND C4 has moderate hydrophobicity which is used to extract large biomolecules like proteins/peptides in aqueous samples. It works best for molecules with a large hydrophilic region or in case where the hydrophobic region is buried with the 3D structure µm irregular shaped and acid washed silica, 60Å mean pore size, 8% carbon loading and endcapped. CNWBOND C4 SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs

8 SPE 6 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C4 SPE Bulk Packing Sample Preparation Si C4 2.CA g CNWBOND C4-ne Due to shorter alkyl chains and non-endcapped the silica surface is not completely shielded, CNWBOND C4-ne is similar to C4 but more polar so as to enhance retention of basic and polar compounds 40-63µm irregular shaped and acid washed silica, 60Å mean pore size, 8% carbon loading and non-endcapped. CNWBOND C4-ne SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C4-ne SPE Bulk Packing 2.CA g CNWBOND C8 Si C8 CNWBOND C8 has moderate hydrophobicity that works well for separating a wide range of compounds and to be used instead of C18 when too strongly retention on C18. The C8 is widely utilized in the simultaneous extraction of fat- and water-soluble vitamins from human serum and herbicides, fungicides, pesticides from waste material µm irregular shaped and acid washed silica, 60Å mean pore size, 12% carbon loading and endcapped. CNWBOND C8 SPE Cartridge 2.CA mg, 1mL 100 pcs

9 SPE Si C8 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C8 SPE Bulk Packing 2.CA g CNWBOND C8-ne CNWBOND C8-ne is similar to C8 but is non-endcapped, which has enhanced retention of more polar and basic compounds at the same time µm irregular shaped and acid washed silica, 60Å mean pore size, 12% carbon loading and non-endcapped. CNWBOND C8-ne SPE Cartridge 7 Sample Preparation 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C8-ne SPE Bulk Packing 2.CA g CNWBOND C12 Si CNWBOND C12 has a polarity similar to C18 with additional steric bulk to provide additional separation characteristics µm irregular shaped and acid washed silica, 60Å mean pore size, 16% carbon loading and endcapped.

10 SPE CNWBOND C12 SPE Cartridge 8 Sample Preparation Si C18 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND C12 SPE Bulk Packing 2.CA g CNWBOND HC-C18 CNWBOND HC-C18 is the traditional matrix for reversed-phase chromatography. It is widely used as the most hydrophobic silica-based sorbent for nonpolar compounds. Considered as the least selective phase since it retains most organic analytes from aqueous matrices, offer a benefit when the compounds of interest vary widely in structure. C18 can also be utilized for desalting aqueous matrices prior to ion exchange because salts pass through it without retained. The high loading of HC-C18 provides the highest degree of hydrophobicity which increases binding capacities and higher recoveries, higher carbon loading also offer greater resistance to extreme ph conditions. C18 is utilized for cleaning, extracting and concentrating pollutants from aqueous environmental samples, herbicides, fungicides and pesticides from waste material, foods and beverages, typically drugs and metabolites from physiological fluids µm irregular shaped and acid washed silica, 60Å mean pore size, 17% carbon loading and endcapped. CNWBOND HC-C18 SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND HC-C18 SPE Bulk Packing 2.CA g

11 SPE CNWBOND LC-C18 Si C18 CNWBOND LC-C18 has lower carbon loading than HC-C18, which gives unique selectivities. It is also a highly retentive nonpolar silica-based sorbent due to the long hydrocarbon chain, the lower percent carbon loading has been optimized for polar analytes and very strong nonpolar compounds which is too strongly retained on high carbon loading C18. Its typical sample types are nonpolar compounds from water and aqueous biological fluids µm irregular shaped and acid washed silica, 60Å mean pore size, 11% carbon loading and endcapped. 9 CNWBOND LC-C18 SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND LC-C18 SPE Bulk Packing 2.CA g Sample Preparation CNWBOND C18-ne Si C18 CNWBOND C18-ne is a non-endcapped octadecyl bonded phase that enables the silica surface to be more active. The silanol activity permits fractionation of metabolites and enhances retention of basic compounds compared with endcapped C18. So its retention mechanism includes moderately nonpolar and polar secondary interactions, typically it is used for extracting compounds from biological matrics and aqueous samples µm irregular shaped and acid washed silica, 60Å mean pore size, 17% carbon loading and non-endcapped. CNWBOND C18-ne SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs

12 SPE CNWBOND C18-ne SPE Bulk Packing 2.CA g 10 Sample Preparation Si CNWBOND CYH CNWBOND CYH (Cyclohexyl) is a sorbent of medium polarity used in reversed-phase chromatography. The properties of CH functional groups have ability to retain polar analytes such as phenol from aqueous matrices, because it has a different selectivity than the other nonpolar sorbent like C18, C8, C4 and Phenyl, it is usually used when those nonpolar sorbents fail to provide the desired selectivity µm irregular shaped and acid washed silica, 60Å mean pore size, 10% carbon loading and endcapped. CNWBOND CYH SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND CYH SPE Bulk Packing 2.CA g Si CNWBOND PHE CNWBOND PHE (Phenyl) sorbent has medium polarity used in nonpolar extractions. It has similar retention to C8 but with a different selectivity especially for planar and conjugated molecules containing aromatics and fatty acids because of its electron density of aromatic ring µm irregular shaped and acid washed silica, 60Å mean pore size, 9% carbon loading and endcapped. CNWBOND PHE SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs

13 SPE 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND PHE SPE Bulk Packing 2.CA g 11 Si CNWBOND Si CNWBOND Silica is the most polar sorbent presenting a slightly acidic character, it is one of the best sorbents available for selectively separating analytes of very similar structure. CNWBOND Si is often used to extract various compounds from non-polar solvents using hydrogen bonding, then accomplishing the elution successively with increasing the solvent polarity. It has excellent capacity for removing target molecules from reaction byproducts and excess reagents µm irregular shaped and unbonded acid washed silica, 60Å mean pore size and non-endcapped. CNWBOND Si SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs Sample Preparation CNWBOND Si SPE Bulk Packing 2.CA g CNWBOND CN Si N CNWBOND CN (Cyano) can be used both in normal and reversed-phase chromatography as its less polar compared to silica and less hydrophobic compared to C18 and C8. The sorbent is usually used to extract acidic, neutral, and basic compounds from aqueous solutions µm irregular shaped and acid washed silica, 60Å mean pore size, 7% carbon loading and endcapped. CNWBOND CN SPE Cartridge 2.CA mg, 1mL 100 pcs

14 SPE 12 Sample Preparation Si O OH OH 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND CN SPE Bulk Packing 2.CA g CNWBOND Diol CNWBOND Diol is used as polar sorbent in normal phase, which has the ability to form hydrogen bonds and the capacity to separate structural isomers like unbonded silica. However, it also has a different selectivity than bare silica gel and slight modifications in the composition of the solvent mixture may be necessary to obtain a similar retention. Usually, it is utilized for isolation of drugs and metabolites from physiological fluids µm irregular shaped and acid washed silica, 60Å mean pore size, 7% carbon loading and non-endcapped. CNWBOND Diol SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Diol SPE Bulk Packing 2.CA g CNWBOND NH 2 Si NH2 CNWBOND NH 2 is an aminopropyl phase that is very polar in nature utilizing both hydrogen bonding and anion exchange. Since the pka of NH 2 is 9.8, when used at ph 7.8, the functional groups are positively charged. Therefore, it is a weaker anion exchanger for retention of very strong anions such as sulfonic acids which may be retained irreversibly on SAX. Its typical application includes separation of peptides, drugs and metabolites from physiological fluids, and also it is used for extraction of mono- and

15 SPE polysaccharides, steroids, cholesterol and triglycerides µm irregular shaped and acid washed silica, 60Å mean pore size, 1.6 meq/g ion exchange capacity and endcapped. CNWBOND NH 2 SPE Cartridge Si NH2 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND NH 2 SPE Bulk Packing 2.CA g CNWBOND NH 2 -ne CNWBOND NH 2 -ne is non-endcapped of CNWBOND NH 2. Non-endcapped of NH 2 is similar to that with endcapped aminopropyl, and it has additional retention of polar and cationic compounds µm irregular shaped and acid washed silica, 60Å mean pore size, 1.6 meq/g ion exchange capacity and non-endcapped. 13 Sample Preparation CNWBOND NH 2 -ne SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND NH 2 -ne SPE Bulk Packing 2.CA g

16 SPE CNWBOND WAX 14 Si N CNWBOND WAX has some resemblance to CNWBOND NH 2 and CNWBOND PSA in its properties. It has a pka of 10.5 because of diethylaminopropyl functional group, and is preferred over CNWBOND SAX when performing release of interest compounds which has strong ions. The additional carbon chains make WAX a more nonpolar character than NH 2, and even less polar than C2 and CN µm irregular shaped and acid washed silica, 60Å mean pore size, 1.2 meq/g ion exchange capacity and endcapped. CNWBOND WAX SPE Cartridge Sample Preparation 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND WAX SPE Bulk Packing 2.CA g CNWBOND PSA Si N H NH 2 CNWBOND PSA is similar to CNWBOND NH 2 in terms of selectivity. As an anion exchange sorbent bonded with ethylenediamine-n-propyl, PSA has two amine groups that offer much higher ionic capacity, and exhibits a pka of 10.1 and Therefore, PSA has strong affinity and high capacity for removing fatty acids, organic acids, and some polar pigments and sugars when conducting multi-residue pesticide analysis in foods, its functional group is a very good bidentate ligand making PSA an excellent sorbent for chelation µm irregular shaped and acid washed silica, 60Å mean pore size, 1.4 meq/g ion exchange capacity and endcapped. CNWBOND PSA SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs

17 SPE CNWBOND PSA SPE Bulk Packing 2.CA g Si N + Cl - CNWBOND SAX CNWBOND SAX is a strongest anion exchange sorbent because of its quaternary amine functional group. The sorbent is always positive charged, which is good choice for retention of weaker anions such as carboxylic acids that may not retain strongly enough on WAX or NH 2 and PSA. Since the chloride counter ion is bound to the ammonium, it may be suited to activate the ion exchanger by conditioning it with appropriate buffers µm irregular shaped and acid washed silica, 60Å mean pore size, 1.1 meq/g ion exchange capacity and non-endcapped. CNWBOND SAX SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs 15 Sample Preparation CNWBOND SAX SPE Bulk Packing 2.CA g CNWBOND WCX Si O OH CNWBOND WCX is a carboxy propyl functionalized silica which has a medium polarity. It is primarily used as a weak cation exchanger that does not require extreme basic conditions fro elution because of its 4.5 pka. CNWBOND WCX is often the best choice for cation exchange especially when dialing with very strong cations in case of making release of the compound of interest on SCX is difficult because of the strong interaction between the two strong ions µm irregular shaped and acid washed silica, 60Å mean pore size, 1.4 meq/g ion exchange capacity and endcapped. CNWBOND WCX SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs

18 SPE 16 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND WCX SPE Bulk Packing Sample Preparation Si O S O - O Na + 2.CA g CNWBOND PRS CNWBOND PRS is a strong cation exchange sorbent which is similar to CNWBOND SCX but slightly less acidic. It maintains a negative charge throughout the ph scale, so it is most effective for weaker cations such as pyridinium compounds. Its typical application includes malachite green and other basic molecules from water and biological samples µm irregular shaped and acid washed silica, 60Å mean pore size, 1.0 meq/g ion exchange capacity and endcapped. CNWBOND PRS SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND PRS SPE Bulk Packing 2.CA g CNWBOND SCX Si O S O OH CNWBOND SCX is a strongest cation exchange sorbent because of its benzenesulfonic acid functional group. It has been optimized for use in organic applications, which will not dissolve in methanol or any other solvents. The presence of the benzene ring on its surface exhibits nonpolar character which is useful with compounds that has both cationic and nonpolar properties in aqueous solvent µm irregular shaped and acid washed silica, 60Å mean pore size, 0.8 meq/g ion exchange capacity and endcapped. CNWBOND SCX SPE Cartridge 2.CA mg, 1mL 100 pcs

19 SPE SPE Tube Adapter For more information about this product, please refer to page CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND SCX SPE Bulk Packing 2.CA g CNWBOND C8/SCX CNWBOND C8/SCX sorbent contains both octyl (C8) and benzenesufonic acid (SCX) bondings, which exhibits dual retention mechanism for isolating of neutral, basic, acidic and zwitterionic compounds. Its mixed-mode cation exchange character develops for superior selectivity of sample clean up when extracting basic and neutral compounds from aqueous solutions, typically drugs and metabolites from physiological fluids µm irregular shaped and acid washed silica, 60Å mean pore size and endcapped. CNWBOND C8/SCX SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs 17 Sample Preparation CNWBOND C8/SAX CNWBOND C8/SAX sorbent contains both octyl (C8) and quaternary amine (SAX) bondings, which exhibits dual retention mechanism for isolating of neutral, basic, acidic and zwitterionic compounds. Its mixed-mode anion exchange character develops for superior selectivity of sample clean up when extracting acidic and neutral compounds from aqueous solutions, typically salicylic acid, ibuprofen, acetaminophen, drugs and metabolites from physiological fluids µm irregular shaped and acid washed silica, 60Å mean pore size and endcapped. CNWBOND C8/SAX SPE Cartridge 2.CA mg, 1mL 100 pcs

20 O O SPE 18 Sample Preparation - O Si Mg 2+ O - 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Florisil CNWBOND Florsil is a magnesia-loaded silica gel, which is a polar sorbent presenting slightly basic character used to extract polar to moderately polar compounds from non-polar matrices. It is utilized for the separation of chlorinated pesticides, amines, herbicides, PCBs, ketones, organic acids and phenols mesh irregular shape and 289 m 2 /g surface area. CNWBOND Florisil SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Florisil SPE Bulk Packing 2.CA g CNWBOND Florisil PR - O Si Mg 2+ O - CNWBOND Florisil PR is similar to CNWBOND Florisil but with different mesh size which is suitable for US method EPA 608. It is utilized for the separation of chlorinated pesticides, amines, herbicides, PCBs, ketones, organic acids and phenols mesh irregular shape. CNWBOND Florisil PR SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs

21 SPE Al2O3 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Florisil PR SPE Bulk Packing 2.CA g CNWBOND Alumina-A CNWBOND Alumina-A enhances Lewis acid properties, which makes the sorbent more retentive towards electron-rich compounds. Furthermore, Alumina-A has a slightly cationic nature through pretreatment with acidic solutions, so it is suitable for retention of neutral and anionic species mesh irregular shape and acidic ph ~4.5 (Brockman Act. I) CNWBOND Alumina-A SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA g, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs 19 Sample Preparation CNWBOND Alumina-A SPE Bulk Packing 2.CA g Al2O3 CNWBOND Alumina-N CNWBOND Alumina-N is an extremely polar sorbent which is similar to silica, but Alumina-N is more stable under high ph conditions than unbonded silica. The sorbent has an electrically neutral surface that is retentive for electron-rich compounds like aromatic species and aliphatic amines, and compounds with electronegative groups like oxygen, phosphorus and sulfur atoms. It is utilized for extracting both nonpolar and polar compounds from aqueous and nonaqueous matrics respectively mesh irregular shape and neutral ph ~7.0 (Brockman Act. I)

22 SPE 20 Sample Preparation Al2O3 CNWBOND Alumina-N SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA g, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Alumina-N SPE Cartridge for Sudan Dye 2.CA g, 3mL 50 pcs CNWBOND Alumina-N SPE Bulk Packing 2.CA g CNWBOND Alumina-B CNWBOND Alumina-B exhibits Lewis base properties, which makes the sorbent more retentive towards electron-donors compounds. Furthermore, the surface of Alumina-B has a slightly anionic nature through pretreatment with acidic solutions, so it is suitable for retention of neutral and cationic compounds. Strong hydrogen bonding on Alumina-B is also effective for polar cations mesh irregular shape and basic ph ~9.5 (Brockman Act. I) CNWBOND Alumina-B SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 3mL 50 pcs 2.CA g, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs CNWBOND Alumina-B SPE Bulk Packing 2.CA g

23 SPE CNWBOND Celite545 SiO2 CNWBOND Celite545 is a filter aid, treated with sodium carbonate, calcined diatomaceous silica. It is usually prepared for chromatography and other laboratory applications. 125µm and ph>8.5. CNWBOND Celite545 SPE Cartridge 2.CA g, 12mL 20 pcs 21 CNWBOND Celite 545/Na 2 SO 4 SPE Cartridge 2.CA g/2g, 12mL 30 pcs CNWBOND Celite545 SPE Bulk Packing 2.CA g CNWBOND Coconut Charcoal CNWBOND Coconut Charcoal is a activated coconut charcoal which is developed specifically for EPA Method 521 (Determination of Nitrosamines in Drinking Water) and EPA Method 522 (Determination of 1,4-Dioxane in Drinking Water) mesh. CNWBOND Coconut Charcoal SPE Cartridge 2.CA g, 6mL 30 pcs Sample Preparation CNWBOND Coconut Charcoal SPE Bulk Packing 2.CA g CNWBOND Carbon-GCB CNWBOND Carbon-GCB is the type of graphitized non-porous carbon, which surface comprises of hexagonal ring structures, interconnected and layered into graphitic sheets. It has extreme affinity for organic polar and non-polar compounds from both nonpolar and polar matrices when used under reversed-phase conditions, while its special structure has a strong retention towards planar molecules. As its special character, it is widely utilized for replacement of C8 and C18 coated on silica when extraction for polar pesticides in water, those C8 and C18 have shown very poor efficiency of polar compounds even lower than that of technique of liquid/liquid extraction. Furthermore, non-porous nature of the carbon-gcb allows for rapid processing because of adsorption does not require analyte dispersion into solid phase pores. Its typical application includes isolation/removal of pigments, sterols, phenols, chloroanilines, organochlorine pesticides, Carbamates, Triazine, Herbicides and Chloroanilines from various matrices like ground water, fruits and vegetables etc. 100 m 2 /g surface area and mesh. GCB SPE Column CNWBOND Carbon-GCB SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs

24 SPE 22 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs Sample Preparation GCB-NH 2 SPE Column CNWBOND Carbon-GCB SPE Bulk Packing 2.CA g CNWBOND GCB/NH 2 CNWBOND GCB/NH 2 is a dual layer SPE cartridge that contains CNWBOND Carbon-GCB (upper layer) and CNWBOND NH 2 (lower layer) SPE sorbents. It combines advantages with both GCB and NH 2 sorbents, Carbon-GCB has a strong affinity towards planar molecules, pigments like chlorophyll and carotinoids, sterols commonly in foods and natural products, while NH 2 can effectively retains fatty acids, organic acids, some polar pigments and sugars in food matrices. Therefore, CNWBOND GCB/NH 2 offers superior clean up of multi-residue pesticide from food like meats, fruits, vegetables etc. CNWBOND GCB/NH 2 SPE Cartridge 2.CA mg/200mg, 3mL 50 pcs 2.CA mg/500mg, 3mL 50 pcs 2.CA mg/200mg, 6mL 30 pcs 2.CA mg/600mg, 6mL 30 pcs 2.CA mg/500mg, 6mL 30 pcs 2.CA mg/300mg, 6mL 30 pcs 2.CA g/500mg, 6mL 30 pcs 2.CA g/500mg, 10mL 20 pcs 2.CA mg/500mg, 10mL 20 pcs 2.CA g/500mg, 35mL 20 pcs 2.CA mg/500mg, 35mL 20 pcs 2.CA g/1g, 35mL 20 pcs GC Colulmns For more information about this product, please refer to pages CNWBOND GCB/PSA CNWBOND GCB/PSA is a dual layer SPE cartridge that contains CNWBOND Carbon-GCB (upper layer) and CNWBOND PSA (lower layer) SPE sorbents. It combines advantages with both GCB and PSA sorbents, Carbon-GCB has a strong affinity towards planar molecules, pigments like chlorophyll and carotinoids, sterols commonly in foods and natural products, while PSA can effectively retains fatty acids, organic acids, some polar pigments and sugars in food matrices. It is similar to CNWBOND GCB/NH 2, but GCB/PSA has more retention for analytes because its PSA in the lower layer contains both primary and secondary amines. Therefore, CNWBOND GCB/PSA offers superior clean up of multiresidue pesticide from food like meats, fruits, vegetables etc. CNWBOND GCB/PSA SPE Cartridge 2.CA mg/200mg, 3mL 50 pcs 2.CA mg/500mg, 3mL 50 pcs 2.CA mg/200mg, 6mL 30 pcs 2.CA mg/600mg, 6mL 30 pcs

25 SPE 2.CA mg/500mg, 6mL 30 pcs 2.CA mg/300mg, 6mL 30 pcs 2.CA g/500mg, 6mL 30 pcs 2.CA g/500mg,10mL 20 pcs 2.CA mg/500mg, 10mL 20 pcs 2.CA g/500mg,35mL 20 pcs 2.CA mg/500mg, 35mL 20 pcs 2.CA g/1g, 35mL 20 pcs 23 CNWBOND SAX/PSA CNWBOND SAX/PSA is a dual layer SPE cartridge that contains CNWBOND SAX (upper layer) and CNWBOND PSA (lower layer) SPE sorbents. It combines advantages with both SAX and PSA sorbents, SAX has a strong affinity towards nearly all the acidic compounds in different matrices, while PSA can effectively retains fatty acids, organic acids, some polar pigments and sugars in food matrices. Therefore, CNWBOND SAX/PSA offers superior removing of matrix interference and enhancement of multi-residue pesticide from food for analysis. CNWBOND SAX/PSA SPE Cartridge 2.CA mg/200mg, 3mL 50 pcs 2.CA mg/200mg, 6mL 30 pcs 2.CA mg/600mg, 6mL 30 pcs 2.CA mg/500mg, 6mL 30 pcs 2.CA mg/300mg, 6mL 30 pcs 2.CA g/500mg, 6mL 30 pcs 2.CA g/500mg, 10mL 20 pcs 2.CA mg/500mg, 10mL 20 pcs 2.CA g/500mg, 35mL 20 pcs 2.CA mg/500mg, 35mL 20 pcs 2.CA g/1g, 35mL 20 pcs Sample Preparation CNWBOND GCB/SAX CNWBOND GCB/SAX SPE Cartridge 2.CA mg/500mg, 6mL 30 pcs CNWBOND GCB/SAX/PSA CNWBOND GCB/SAX/PSA is a tri-layer SPE cartridge that contains CNWBOND Carbon- GCB (upper layer), CNWBOND SAX (middle layer) and CNWBOND PSA (lower layer) SPE sorbents. It combines advantages with all the three sorbents, Carbon-GCB has a strong affinity towards planar molecules, pigments like chlorophyll and carotinoids, sterols commonly in foods and natural products, SAX offers additional ion-exchange capacity for removing and enhancement of components during analysis, PSA can effectively retains fatty acids, organic acids, some polar pigments and sugars in food matrices. Therefore, CNWBOND GCB/SAX/PSA offers superior clean up of multi-residue pesticide from food like meats, fruits, vegetables etc. Solvents for GC Residue Analysis For more information about this product, please refer to pages CNWBOND GCB/SAX/PSA SPE Cartridge

26 SPE 2.CA mg/500mg/500mg, 10mL 20 pcs 2.CA mg/400mg/600mg, 10mL 20 pcs 2.CA mg/500mg/500mg, 35mL 20 pcs 2.CA mg/400mg/600mg, 35mL 20 pcs 24 Sample Preparation CNWBOND GCB/NH 2 /Si CNWBOND GCB/NH 2 /Si is a tri-layer SPE cartridge that contains CNWBOND Carbon- GCB (upper layer), CNWBOND NH 2 (middle layer) and CNWBOND Si (lower layer) SPE sorbents. It combines advantages with all the three sorbents, Carbon-GCB has a strong affinity towards planar molecules, pigments like chlorophyll and carotinoids, sterols commonly in foods and natural products, NH 2 can effectively retains fatty acids, organic acids, some polar pigments and sugars in food matrices, Si has excellent capacity for removing target molecules from reaction by-products and excess reagents. CNWBOND GCB/NH 2 /Si offers superior clean up of multi-residue pesticide from food like meats, fruits, vegetables etc. CNWBOND GCB/NH 2 /Si SPE Cartridge 2.CA mg/500mg/500mg, 10mL 20 pcs 2.CA mg/400mg/600mg, 10mL 20 pcs 2.CA mg/500mg/500mg, 35mL 20 pcs 2.CA mg/400mg/600mg, 35mL 20 pcs CNWBOND Na 2 SO 4 /Florisil CNWBOND Na 2 SO 4 /Florisil is a dual layer SPE cartridge that contains Na 2 SO 4 (upper layer) and Florisil (lower layer). Na 2 SO 4 layer aids in removing aqueous sample residues that may hinder Florisil performance and/or subsequent GC analysis. It is Suitable for the determination of the hydrocarbon oil index in water (surface, waste, and sewage treatment plants) by GC-FID analysis. CNWBOND Na 2 SO 4 /Florisil SPE Cartridge 2.CA g/2g, 6mL 30 pcs Poly-Sery HLB Poly-Sery HLB is a hydrophilic modified copolymer which developed for a broad range of compounds from aqueous samples under reversed phase condition. The retention mechanisms of Poly-Sery HLB consist of π-π and H-bonding resulting in a sorbent that has enhanced selectivity for polar and aromatic compounds. It makes your method development to be faster, easier and more effective, furthermore, it has properties of resistance to overdrying allows for more robust methodology and low UV and MS extractables for lower background and greater sensitivity. It is used for nearly all the acidic, basic, and neutral compounds because of its hydrophilic and lipophilic character. 60µm copolymer, 180Å mean pore size, 710m2/g surface area. Poly-Sery HLB SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs

27 SPE 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA mg, 6mL 30 pcs 2.CA mg, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 25 Poly-Sery HLB SPE Bulk Packing n - Cl N + 2.CA g Poly-Sery MAX Poly-Sery MAX is a mixed-mode anion exchange and reversed phase sobent, which has high selectivity and sensitivity for acidic and neutral compounds. Unlike traditional silica-based sorbent, its modified styrene divinylbenzene polymeric surface has hydrophilic and hydrophobic mechanisms, which is stable in ph ranges 0 to 14 and is water-wettable, therefore, it exhibits unique selectivity to cover a diverse spectrum of analytes, simplify the method development process for fast and efficient sample preparation and completely eliminate recovery or reproducibility problems. The strong anion exchange mechanism gives consistent and extremely cleaning up of acidic compounds and fractionation of bases from basic and neutral impurities. The Poly-Sery MAX is widely utilized in separation of clean acidic extracts from different matrices such as plasma, urine, plastic products and food. 40µm or 100µm copolymer, 100Å mean pore size, 600m 2 /g surface area and 0.3 meq/g ionic capacity. Sample Preparation Poly-Sery MAX SPE Cartridge 2.CA µm, 10mg, 1mL 100 pcs 2.CA µm, 30mg, 1mL 100 pcs 2.CA µm, 60mg, 3mL 50 pcs 2.CA µm, 30mg, 3mL 50 pcs 2.CA µm, 150mg, 6mL 30 pcs 2.CA µm, 500mg, 6mL 30 pcs 2.CA µm, 500mg, 10mL 20 pcs 2.CA µm, 1g, 10mL 20 pcs 2.CA µm, 1g, 35mL 20 pcs 2.CA µm, 6g, 35mL 20 pcs Poly-Sery MAX SPE Bulk Packing 2.CA µm 50 g 2.CA µm 50 g Poly-Sery MCX n O S O OH Poly-Sery MCX is a mixed-mode cation exchange and reversed phase sobent, which has high selectivity and sensitivity for basic and neutral compounds. Unlike traditional silicabased sorbent, its modified styrene divinylbenzene polymeric surface has hydrophilic and hydrophobic mechanisms, which is stable in ph ranges 0 to 14 and is waterwettable, therefore, it exhibits unique selectivity to cover a diverse spectrum of analytes, simplify the method development process for fast and efficient sample preparation and completely eliminate recovery or reproducibility problems. The strong cation exchange mechanism gives consistent and extremely cleaning up of basic compounds and

28 SPE fractionation of bases from acidic and neutral impurities. The Poly-Sery MCX is widely utilized in separation of clean basic extracts from different matrices such as plasma, urine, plastic products and food. 40µm or 100µm copolymer, 100Å mean pore size, 600m 2 /g surface area and 0.8 meq/g ionic capacity. 26 Sample Preparation Poly-Sery MCX SPE Cartridge 2.CA µm, 10mg, 1mL 100 pcs 2.CA µm, 30mg, 1mL 100 pcs 2.CA µm, 60mg, 3mL 50 pcs 2.CA µm, 30mg, 3mL 50 pcs 2.CA µm, 150mg, 6mL 30 pcs 2.CA µm, 500mg, 6mL 30 pcs 2.CA µm, 500mg, 10mL 20 pcs 2.CA µm, 1g, 10mL 20 pcs 2.CA µm, 1g, 35mL 20 pcs 2.CA µm, 6g, 35mL 20 pcs Poly-Sery MCX SPE Bulk Packing 2.CA µm 50 g 2.CA µm 50 g Poly-Sery PSD Poly-Sery PSD is a highly crosslinked, neutral, specially cleaned styrene/divinylbenzene copolymer material that is used for retaining hydrophobic compounds which contain some hydrophilic functionality under reversed phase conditions. This material can resist extreme ph condition, it is typically used for aromatics and phenols from aqueous matrics. Phenols are sometimes difficult to retain on silica-based C18 under reversed phase conditions, mainly due to their greater solubility in water than in organic matrices µm copolymer, Å mean pore size and 900m 2 /g surface area. Poly-Sery PSD SPE Cartridge 2.CA mg, 1mL 100 pcs 2.CA mg, 1mL 100 pcs 2.CA mg, 3mL 50 pcs 2.CA mg, 6mL 30 pcs 2.CA mg, 6mL 30 pcs 2.CA g, 10mL 20 pcs 2.CA g, 10mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 35mL 20 pcs 2.CA g, 60mL 16 pcs 2.CA g, 60mL 16 pcs Poly-Sery PSD SPE Bulk Packing 2.CA g Poly-Sery XAD2 Poly-Sery XAD2 is a polyaromatic adsorbent resin which is nonionic macroreticular styrene-divinylbenzene matrix usually used for adsorbing and releasing ionic species through hydrophobic and polar interactions under isocratic conditions. Its typical

29 SPE application is hydrophobic compounds up to MW 20,000 like phenols, organic removal, surfactants, aroma compounds, antibiotic recovery and sometimes used as support for catalyst or metals removal mesh, 90Å mean pore size and 300m 2 /g surface area. Poly-Sery XAD2 SPE Cartridge 2.CA mg, 3mL 50 pcs 27 Poly-Sery XAD2 SPE Bulk Packing 2.CA g Dispersive SPE Products Dispersive SPE (dspe), also named "QuEChERS" method (Quick Easy, Cheap, Effective, Rugged and Safe), is an sample prep technique that is more and more popularly used in the area of multi-class, multi-residue pesticide analysis in food and agricultural products. In dspe, food or agricultural samples are first extracted with an aqueous miscible solvent (e.g., acetonitrile) in the presence of high amounts of salts (e.g., sodium chloride and magnesium sulfate) and/or buffering agents (e.g. citrate) to induce liquid phase separation and stabilize acid and base labile pesticides, respectively. Upon shaking and centrifugation, an aliquot of the organic phase is subjected to further clean up using SPE. In dispersive SPE, clean up is facilitated by mixing bulk amounts of SPE (e.g., CNWBOND PSA, Carbon-GCB, and/or HC-C18) with the extract. After sample clean up, the mixture is centrifuged and the resulting supernatant can either be analyzed directly or can be subjected to minor further treatment before analysis. Sample Preparation dspe Extraction Tube CNW carries all types of Extraction and Clean Up tubes. Salts, buffers and SPE sorbents are pre-packaged in anhydrous packages, which is to support the most common QuEChERS methodologies used today. CNW Dispersive SPE product line is configured for use with European Method EN and AOAC Method. Citrate Extraction Tube 2.CA CA CA Magnesium sulfate 4g, NaCl 1g, sodium citrate dibasic sesquihydrate 0.5g, sodium citrate tribasic dihydrate 1g, 15mL Magnesium sulfate 4g, NaCl 1g, sodium citrate dibasic sesquihydrate 0.5g, sodium citrate tribasic dihydrate 1g, 50mL Magnesium sulfate 6g, NaCl 1.5g, sodium citrate dibasic sesquihydrate 0.75g, sodium citrate tribasic dihydrate 1.5g, 50mL 50 pcs 50 pcs 50 pcs Mg 2 SO 4 Extraction Tube 2.CA Magnesium sulfate 6g, sodium acetate 1.5g, 15mL 50 pcs 2.CA Magnesium sulfate 6g, sodium acetate 1.5g, 50mL 50 pcs 2.CA Magnesium sulfate 4g, NaCl 0.5g, 50mL 50 pcs 2.CA Magnesium sulfate 4g, NaCl 1g, 50mL 50 pcs 2.CA Magnesium sulfate 6g, NaCl 1.5g, 50mL 50 pcs PSA Clean Up Tube 2.CA Magnesium sulfate 150mg, PSA 25mg, 2mL 100 pcs 2.CA Magnesium sulfate 150mg, PSA 50mg, 2mL 100 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, 15mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, 50mL 50 pcs

30 SPE 2.CA Magnesium sulfate 1.2g, PSA 400mg, 50mL 50 pcs PSA/C18 Clean Up Tube 28 Sample Preparation dspe Clean Up Tube 2.CA Magnesium sulfate 150mg, PSA 25mg, C18 25mg, 2mL 100 pcs 2.CA Magnesium sulfate 150mg, PSA 50mg, C18 50mg, 2mL 100 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, C18 150mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 300mg, C18 150mg, 15mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg, C18 400mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, C18 150mg, 50mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 300mg, C18 150mg, 50mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg, C18 400mg, 50mL 50 pcs PSA/GCB Clean Up Tube 2.CA Magnesium sulfate 150mg, PSA 25mg, GCB 2.5mg, 2mL 100 pcs 2.CA Magnesium sulfate 150mg, PSA 25mg, GCB 7.5mg, 2mL 100 pcs 2.CA Magnesium sulfate 150mg, PSA 50mg, GCB 50mg, 2mL 100 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, GCB 15mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, GCB 45mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 300mg, GCB 150mg, 15mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg, GCB 400mg, 15mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 150mg, GCB 45mg, 50mL 50 pcs 2.CA Magnesium sulfate 900mg, PSA 300mg, GCB 50mg, 50mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg, GCB 400mg, 50mL 50 pcs PSA/GCB/C18 Clean Up Tube 2.CA Magnesium sulfate 150mg, PSA 50mg,GCB 50mg, C18 50mg, 2mL 100 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg,GCB 400mg, C18 400mg, 15mL 50 pcs 2.CA Magnesium sulfate 1.2g, PSA 400mg,GCB 400mg, C18 400mg, 50mL 50 pcs

31 SPE SPE Tube Accessories Empty SPE Tubes and Frits Empty SPE Tubes SPE Frits CNW CNWBOND and Poly-Sery SPE tubes are available in sizes from 1 ml to 60 ml made with serological grade polypropylene to be straight-walled syringe barrels. Clean 20 µm polyethylene frits are precut to fit into CNW SPE columns for either filtration or custom packing needs. To request a large package of tubes and frits, please contact us directly or local representatives. Empty Polypropylene SPE Tube (no frits) 2.CR volume 1mL 100 pcs 2.CR volume 3mL 100 pcs 2.CR volume 6mL 100 pcs 2.CR volume 10mL 100 pcs 2.CR volume 35mL 100 pcs 2.CR volume 60mL 100 pcs Polyethylene Frits 2.CR01PE.0001 for 1mL tube 100 pcs 2.CR03PE.0001 for 3mL tube 100 pcs 2.CR06PE.0001 For 6mL tube 100 pcs 2.CR10PE.0001 For 10mL tube 100 pcs 2.CR35PE.0001 For 35mL tube 100 pcs 2.CR60PE.0001 For 60mL tube 100 pcs 29 Sample Preparation SPE Tube Adapter Tube adapters serve many purposes. They can be used to connect SPE tubes in series to provide different selectivities. A larger empty syringe barrel can be stacked on top of a smaller SPE tube to act as a larger load reservoir. They can also serve as an adapter for positive pressure methods. SPE Tube Adapter SPE Tube Adapter 2.CR For 1, 3 and 6mL tubes 12 pcs 2.CR For 10, 35 and 60mL tubes 6 pcs

32 SPE SPE Vacuum Manifolds & Accessories SPE Vacuum Manifold 30 Sample Preparation 12-position Vacuum Manifold 16-position Vacuum Manifold Vacuum manifolds for SPE sample preparation, filtration, and elusion are available in 12-, 16-, and 24-port configurations. These manifolds permit consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The manifolds consist of a clear glass chamber and lid to which a vacuum is applied to draw a sample through an SPE column, cartridge, or disk. Adjustable racks placed in the glass vacuum chamber will accommodate a variety of sample collection vessels, including test tubes, autosampler vials, volumetric flasks, and Erlenmeyer flasks. Eluants are deposited directly into the collection vessel of choice via polypropylene, optional stainless steel, or Teflon needles. Drying attachments for the 12- and 24-port manifolds will direct a flow of air or nitrogen into the collection vessels to dry eluants prior to further analysis. Drying attachments can also be connected, via adapters, to SPE columns or cartridges in order to dry the column or cartridge prior to final elusion. Optional disposable solvent resistant polypropylene containers are available for the twelve port manifolds. These waste containers greatly simplify sample preparation, solvent disposal, and clean-up. 12 Position Vacuum Manifold Set-Complete 2.CR Includes: 1 glass chamber 1 cover, gasket, & 12 stopcocks 1 vacuum gauge & valve assembly 12 polypropylene needles Collection rack shelves, legs, clips, & posts 6 plates 1 waste container 1pcs 24-position Vacuum Manifold 16 Position Vacuum Manifold Set-Complete 2.CR Includes: 1 glass chamber 1 cover, gasket, & 16 stopcocks 1 vacuum gauge & valve assembly 16 polypropylene needles Collection rack shelves, legs, clips, & posts 4 plates 24 Position Vacuum Manifold Set-Complete 1 pcs 2.CR Includes: 1 glass chamber 1 cover, gasket, & 24 stopcocks 1 vacuum gauge & valve assembly 24 polypropylene needles Collection rack shelves, legs, clips, & posts 4 plates 1 pcs 10-position Flash Vacuum Manifold 10 Position Flash Vacuum Manifold For your large column applications from 10 to 70g, these introduced processing stations target the large SPE and Flash columns. Typically vacuum manifolds can handle only 12, 16, or 24 normal size columns, but for those samples that require larger capacity, we have developed a new larger manifold. With 10 positions, the unit is able to address the larger solvent volumes.

33 SPE 10 Position Flash Vacuum Manifold Set-Complete 2.CR Includes: 1 glass chamber 1 cover, gasket, & 10 stopcocks 1 vacuum gauge & valve assembly 10 polypropylene needles Collection rack shelves, legs, clips, & posts 4 plates 1 pcs 31 Drying Attachment Drying Attachments Drying Attachments are available for the 12-, 16-, and 24-port manifolds and 10-port flash manifold, which will direct the flow of air or nitrogen into the collection vessels to concentrate eluants, prior to further analysis. Drying attachments can also be connected directly to columns, cartridges, or disks ia adapters to permit drying sorbent beds, prior to final elution. Drying Attachment 2.CR Position Drying Attachment 1 pcs 2.CR Position Drying Attachment 1 pcs 2.CR Position Drying Attachment 1 pcs 2.CR Position Drying Attachment for Flash Manifold 1 pcs 12 Position PP Vacuum Waste Container Sample Preparation Disposable solvent resistant polypropylene waste container, for 12-port manifold, greatly simplify sample preparation, solvent disposal, and final clean-up of the manifold. The liner is designed to contain all liquids used in SPE sample preparation. Place the disposable liner into the glass vacuum chamber, and replace the manifold lid. Just prior to final elution, the liner, containing the waste solvents, is removed from the vacuum chamber. Waste solvents should be properly discarded from the container. It can be cleaned and re-used a number of times, prior to discarding. Waste Container Large Volume Sampler 12 Position PP Vacuum Waste Container 2.CR Disposable waste container, PP 10 pcs Large Volume Sampler Large volume sampler enables you to transfer low viscosity samples directly from any sample container to conventional SPE tubes on the SPE vacuum manifold. It contains 1/8-inch PTFE tubing with a SPE adapter at one end for connecting SPE tubes and a stainless steel weight at the other end for touching the bottom of sample container. Note that large volume sampler can only be used with polypropylene SPE tubes. Large Volume Sampler 2.CA For use with 3 or 6mL SPE tubes 1 pcs Large Volume Sampler with Vacuum Manifold

34 SPE Optional Needles for Vacuum Manifold The optional disposable solvent resistant PP needles and stainless steel needles are used for most applications. 32 Disposable Teflon Needles are designed to fit through the manifold lid via the luer fitting. These needles deliver the eluant directly from the SPE extraction column or cartridge into the collection vessel in the vacuum chamber. These needles, when used in conjunction with Teflon columns and Teflon frits ensure zero extractables from the column, frits, and fluid path. This combination is especially useful for critical sample analysis, such as environmental samples. Sample Preparation Needles-Polypropylene Needles-Stainless Steel Needles - Polypropylene 2.CR For use with 12-port manifold 12 pcs 2.CR For use with 16-port manifold 16 pcs 2.CR For use with 24-port manifold 24 pcs 2.CR For use with 10-port flash manifold 10 pcs Needles - Stainless Steel 2.CR For use with 12-port manifold 12 pcs 2.CR For use with 16-port manifold 16 pcs 2.CR For use with 24-port manifold 24 pcs 2.CR For use with 10-port flash manifold 10 pcs Needles - Teflon 2.CR For use with SPE Vacuum Manifolds 50 pcs 2.CR For use with SPE Vacuum Manifolds 100 pcs Other Vacuum Manifold Components Glass Chamber 2.CR Glass chamber, for use with 12-port manifold 1 pcs 2.CR Glass chamber, for use with 16-port manifold 1 pcs 2.CR Glass chamber, for use with 24-port manifold 1 pcs 2.CR Glass chamber, for use with 10-port flash manifold 1 pcs Glass Chamber with Vacuum Gauge, Valve Needles-Teflon 2.CR CR Glass Chamber with Vacuum Gauge, Valve, for use with 12-port manifold Glass Chamber with Vacuum Gauge, Valve, for use with 16-port manifold 1 pcs 1 pcs 2.CR Glass Chamber with Vacuum Gauge, Valve, for use with 24-port manifold 1 pcs 2.CR Glass Chamber with Vacuum Gauge, Valve, for use with 10-port flash manifold 1 pcs Glass Chamber with Vacuum Gauge, Valve Cover, Gasket, Stopcocks Cover, Gasket, Stopcocks Assembly 2.CR Assembly, for use with 12-port manifold, included 12 stopcocks 1 pcs 2.CR Assembly, for use with 16-port manifold, included 16 stopcocks 1 pcs 2.CR Assembly, for use with 24-port manifold, included 24 stopcocks 1 pcs 2.CR Assembly, for use with 10-port flash manifold,included 10 stopcocks 1 pcs

35 SPE Gaskets 2.CR Gaskets, for use with 12-port manifold 2 pcs 2.CR Gaskets, for use with 16-port manifold 2 pcs 2.CR Gaskets, for use with 24-port manifold 2 pcs 2.CR Gaskets, for use with 10-port flash manifold 2 pcs Gaskets Stopcocks Collection Rack Shelves,Legs,Clips, Posts Stopcocks 2.CR For use with 12-port manifold 12 pcs 2.CR For use with 16-port manifold 16 pcs 2.CR For use with 24-port manifold 24 pcs 2.CR For use with 10-port flash manifold 10 pcs Collection Rack Shelves, Legs, Clips, & Posts 2.CR CR CR CR Collection Rack Shelves, Legs, Clips, & Posts,for use with 12-port manifold Collection Rack Shelves, Legs, Clips, & Posts, for use with 16-port manifold Collection Rack Shelves, Legs, Clips, & Posts, for use with 24-port manifold Collection Rack Shelves, Legs, Clips, & Posts, for use with 10-port flash manifold Female Luer Fittings, & Male Luer Fittings 1 pcs 1 pcs 1 pcs 1 pcs 2.CR CR Female Luer Fittings, for use with 12-, 16-, and 24-port manifolds and 10-port flash manifold Male Luer Fittings, for use with 12-, 16-, and 24-port manifolds and 10-port flash manifold 2 pcs 2 pcs 33 Sample Preparation Legs for Cover - Black 2.CR Black legs, for use with 12-, 16-, and 24-port manifolds and 10- port flash manifold 4 pcs Female & Male Luer Fittings Legs for Cover Vacuum Manifold Plugs 2.CR plugs, for use with 12-, 16-, and 24-port manifolds and 10-port flash manifold 2 pcs Plugs Support Posts Support Posts for Rack 2.CR Support posts, included with 12-, 16-, and 24-port manifolds 3 pcs 2.CR Support posts, included with 10-port flash manifold 3 pcs Retaining Clips 2.CR Retaining clips, included with 12-, 16-, and 24-port manifolds and 10-port flash manifold 12 pcs Clips Base Plate with Posts Plate Base The base plate is used for fixing the collection rack shelves. 2.CR For use with 12-port manifold 1 pcs 2.CR For use with 16-port manifold 1 pcs 2.CR For use with 24-port manifold 1 pcs 2.CR For use with 10-port flash manifold 1 pcs

36 SPE Plate Dimple The dimple plate is used when utilizing test tubes as collection vessels CR For use with 12-port manifold 1 pcs 2.CR For use with 16-port manifold 1 pcs 2.CR For use with 24-port manifold 1 pcs 2.CR For use with 10-port flash manifold 1 pcs Plate 13mm It is used for keeping 13mm test tubes. Sample Preparation Plate-13mm Plate-Dimple Plate-16mm 2.CR mm plate, for use with 12-port manifold 1 pcs 2.CR mm plate, for use with 16-port manifold 1 pcs 2.CR mm plate, for use with 24-port manifold 1 pcs Plate 16mm It is used for keeping 16mm test tubes. 2.CR mm plate, for use with 12-port manifold 1 pcs 2.CR mm plate, for use with 16-port manifold 1 pcs 2.CR mm plate, for use with 24-port manifold 1 pcs Plate Autosampler Vial 2.CR Autosampler Vial plate, included with 12-port manifold only 1 pcs Plate Volumetric Flask Plate-Autosampler Vial Plate-Volumetric Flask 2.CR Volumetric Flask plate, included with 12-port manifold only 1 pcs Plate 19mm It is used for keeping 19mm test tubes. 2.CR mm plate, included with 10-port flash manifold only 1 pcs Plate 25mm It is used for keeping 25mm test tubes. 2.CR mm plate, included with 10-port flash manifold only 1 pcs Glass Test Tubes It is used for collecting eluates. Plate-19mm,25mm 2.CR Test tubes, without rim, 5mL, 12 mm 75 mm. 12 pcs 2.CR Test tubes, without rim, 12mL, 16 mm 100 mm. 12 pcs

37 SPE SPE Disk Manifolds & Accessories Use the manifolds with 47mm and 90mm SPE disks. The unique design of the manifolds are unlimited expandability, compact, efficient size, user friendly design, accepts many standard collection vessels, designed for all SPE sample prep methods, and satisfaction Guaranteed! Whether you are performing Oil and Grease Method 1664, Method 525.1, 525.2, 550.1, 608, or 549.1, our Manifold has been designed to facilitate your analysis. For easy loading and leak-proof sealing of the SPE disk, the manifold utilizes a unique threaded Screw cap to hold the glass sample reservoir in place over the disk. This novel design allows for simple replacement of the SPE disk with minimal disassembly of the manifold. 35 Single Station SPE Disk Manifold, 47mm Single Station SPE Disk Manifold, 47mm 2.CP A complete 47mm single station comes with mounting hardware, Glass Sample Reservoir, Disk Support Screen and mm Sample Collection Vessel. 2 - Station SPE Disk Manifold, 47mm 1 pcs 2.CP A complete 47mm 2-station comes with mounting hardware, Glass Sample Reservoir, Disk Support Screen and mm Sample Collection Vessel. 3 - Station SPE Disk Manifold, 47mm 1 pcs 2.CP A complete 47mm 3-station comes with mounting hardware, Glass Sample Reservoir, Disk Holder and mm Sample Collection Vessel. 1 pcs Sample Preparation 3-Station SPE Disk Manifold,47mm 6 - Station SPE Disk Manifold, 47mm 2.CP A complete 47mm 6-station comes with mounting hardware, Glass Sample Reservoir, Disk Holder and mm Sample Collection Vessel. Single Station SPE Disk Manifold, 90mm 1 pcs 2.CP A complete 90mm single station comes with mounting hardware, Glass Sample Reservoir, Disk Holder and mm Sample Collection Vessel. 6 - Station SPE Disk Manifold, 90mm 1 pcs 2.CP Racks for Disk Manifolds A complete 90mm 6-station comes with mounting hardware, Glass Sample Reservoir, Disk Support Screen and mm Sample Collection Vessel. 1 pcs 2.CP Rack for 3-station 1 pcs 2.CP Rack for 6-station 1 pcs Sample Reservoir 2.CP mL, for use with 47mm Manifold 1 pcs 2.CP mL, for use with 90mm Manifold 1 pcs

38 SPE Disk Holder The disk holder includes 316 SS disk support screen, a threaded screw cap to provide attachment of sample reservoir and a PTFE valve to control solvent fluid. 2.CP Disk holder, for use with 47mm Manifold 1 pcs 2.CP Disk holder, for use with 90mm Manifold 1 pcs 36 Sample Collection Vessel Sample Preparation Disk Holder Sample Collection Vessel 2.CP CP CP Empore TM Extraction Disks Sample Collection Vessel, for use with 47mm and 90mm Manifolds, mm, round bottom Sample Collection Vessel, for use with 47mm and 90mm Manifolds, 28 95mm, flat bottom Disk SPE Concentration Tube, for use with 47mm and 90mm Manifolds, 15mL, 1 pcs 1 pcs 1 pcs 2.CP Empore TM C18 47 mm Extraction Disk 20 pcs 2.CP Empore TM SDB-XC 47 mm Extraction Disk 20 pcs 2.CP Empore TM SDB-RPS 47 mm Extraction Disk 20 pcs 2.CP Empore TM C18 90 mm Extraction Disk 10 pcs

39 HPLC Syringe Filters and Gloves HPLC Syringe Filters and Gloves HPLC Syringe Filters Syringe Filters Introduction CNW PRECLEAN TM syringe filters are available with two different membrane types in two pore sizes. The ultrasonic-welded Polypropylene housing of the syringe filters ensures high pressure resistance. The membrane is fixed in the housing in such a way that a bypassing of the sample liquid is impossible. The colour-coding enables easy identification of the filter s membrane type. Due to their Luer-Lock-Inlet (female) an easy and safe installation of the filter on the syringe is guaranteed. The outlet is designed as Luer-Slip (male). All PRECLEANTM syringe filters are HPLC certified, thorough quality controls before and after the manufacturing process guarantee a constantly high quality of the membrane material as well as of the complete filter unit. Polyethersulfone (PES) Hydrophilic, very low protein binding Fast filtration with superior flow rates and high throughputs Mechanically strong, may be used with alcohols and resistive proteins Also with higher temperatures Reduce filtration time; optimized for biological, pharmaceutical filtration requirements Nylon (PA) Hydrophilic, for aqueous and aqueous/organic solvents with ph range 3-10 High sensitivity and low background for enhanced detection and resolution The industry standard for pharmaceutical filtration, provides broad solvent and chemical compatibility and low extractables 37 Sample Preparation PRECLEAN TM 13 mm Syringe Filter 2.CF PES membrane, 0.45 µm, blue 100 pcs 2.CF PES membrane, 0.2 µm, yellow 100 pcs 2.CF Nylon (PA) membrane, 0.45 µm, white 100 pcs 2.CF Nylon (PA) membrane, 0.2 µm, green 100 pcs PRECLEAN TM 25 mm Syringe Filter 2.CF PES membrane, 0.45 µm, blue 100 pcs 2.CF PES membrane, 0.2 µm, yellow 100 pcs 2.CF Nylon (PA) membrane, 0.45 µm, white 100 pcs 2.CF Nylon (PA) membrane, 0.2 µm, green 100 pcs List of Solvent Resistance Solvent PES PA Solvent PES PA Acetic Acid, 5% + + Ethylene Glycol + + Acetone - + Formic Acid + - Acetonitrile + + Hydrochloric Acid, Conc + - Ammonia, 6N + + Hexane + + Benzene + * Methanol + + Carbon Tetrachloride + * Methylene Chloride - - Chloroform - - Nitric Acid, Conc - - Citric Acid + * Nitrobenzene - * Cyclohexane + + Phenol, 0.5% - +

40 HPLC Syringe Filters and Gloves 38 Solvent PES PA Solvent PES PA Dimethyl Formamide - + Sodium Hydroxide, 6N + - 1,4-Dioxane * + Sulfuric Acid, Conc - - DMSO - + Tetrahydrofuran - + Ethanol + + Toluene - * Ethers + + Water + + Ethyl Acetate - + Xylene * * + resistant - non resistant * semi resistant Sample Preparation Disposable Powder-free Nitrile Gloves Disposable Gloves Disposable Powder-free Nitrile Gloves CE Category III, protected from complex risks Resistant to several kinds of chemicals 100% Latex-free, will not cause allergic reaction Powder-free, have been specially treated for easy on - easy off Smooth, flexible, and comfortable Durable, not punctured or tore easily Can be used in both hands Thickness: 0.08mm B Size: S, Width: 85±5mm, Color: Bule 100 pcs B Size: M, Width: 95±5mm, Color: Bule 100 pcs B Size: L, Width: 105±5mm, Color: Bule 100 pcs Disposable Powder-free Latex Gloves CE Category III, protected from complex risks Resistant to several kinds of chemicals Powder-free, have been specially treated for easy on - easy off Smooth, flexible, and comfortable Durable, not punctured or tore easily Can be used in both hands Thickness: 0.1mm Disposable Powder-free Latex Gloves W Size: S, Width: 85±5mm, Color: Bule 100 pcs W Size: M, Width: 95±5mm, Color: Bule 100 pcs W Size: L, Width: 105±5mm, Color: Bule 100 pcs

41 Sample Prep Applications Solid Phase Extraction Organophosphorus pesticides in fruits and vegetables Pyrithroid pesticides in spinach 1. Dipterex 2. Dichlorvos 3. Methamidophos 4. Acephate 5. Phorate 6. Omethoate 7. Monocrotophos 8. Dimethoate 9. Methyl Parathion Chlorpyrifos 11. Pirimiphos-methyl 12. Malathion 13. Fenitrothion 14. Parathion 15. Isocarbophos 16. Quinalphos 17. Triazophos Min Bifenthrin 2. Fenpropathrin 3. Cyhalothrin 4. cis-permethrin 5. trans-permethrin 6. Cyfluthrin-1 7. Cyfluthrin-2 8. Cyfluthrin Cyfluthrin Cypermethrin 11. Ethofenprox 12. Silafluofen 13. Fenvalerate 14. Esfenvalerate 15. Deltamethrin Min Sample Preparation Sample Pretreatment: Homogenize 10 g chopped fruit or vegetable sample spiked with pesticides in 20 ml Acetonitrile. Add 2 g NaCl and homogenize 5 min, centrifuge and transfer Acetonitrile layer to clean centrifuge tube. Add proper anhydrous sodium sulfate and centrifuge for 5 min. Evaporate supernatant to 1 ml under N 2 at 35 C. Condition SPE tube with 5 ml acetonitrile:toluene (3:1) Load 1 ml sample onto SPE tube Elute with 20 ml acetonitrile:toluene (3:1) Concentrate to dryness with N 2 at 40 C Reconstitute in 1 ml acetone:n-hexane (1:1) SPE/GC SPE tube: CNWBOND GCB/PSA, 500 mg/500 mg/6 ml (2.CA ) or CNWBOND GCB/NH 2, 500 mg/500 mg/6 ml (2.CA ) Column: CD-5, 30 m 0.25 mm I.D., 0.25 µm film ( ) Temp.: 50 C (1 min) to 200 C at 15 C/min, hold 2 min, then to 260 C at 5 C/min, hold 8 min. Det. FPD, 250 C Carrier gas: Nitrogen Injection: 1 µl 250 C, splitless Sample Pretreatment: Homogenize 10 g fresh spinach spiked with pesticides in 20 ml acetone:n-hexane (1:1). Add 2 g NaCl and homogenize 5 min, centrifuge and transfer supernatant to clean centrifuge tube. Add proper anhydrous sodium sulfate and centrifuge for 5 min. Evaporate supernatant to 2 ml under N 2 at 35 C. Condition by stacking CNWBOND Carbon-GCB SPE tube on top of CNWBOND Florisil SPE tube using an SPE tube adapter. Pass 5 ml acetone:n-hexane (1:1) through both SPE tubes Load 2 ml sample onto SPE tubes Elute with 12mL ether:acetone:n-hexane (2:2:1) through lower Florisil SPE tube Concentrate to dryness with N 2 at 40 C Reconstitute in 1 ml acetone:n-hexane (1:1) SPE/GC SPE tube: CNWBOND Carbon-GCB, 250 mg/3ml (2.CA ) or 500 mg/6 ml (2.CA );CNWBOND Florisil, 500 mg/3 ml (2.CA ) or 1 g/6 ml (2.CA ) Column: CD-5MS, 30 m 0.25 mm I.D., 0.25 µm film ( ) Temp.: 40 C (2 min) to 300 C at 8 C/min, hold 5 min Det. MSD, 200 C, scan range m/z Carrier gas: Helium, 1.0 ml/min Injection: 1 µl 300 C, splitless (4.5 min delay)

42 Sample Prep Applications PAHs in soil Phenols in Water Naphthalene 2. Acenaphthylene 3. Acenaphthene 4. Fluorene 5. Phenanthrene 6. Anthracene 7. Fluoranthene 8. Pyrene 9. Benzo[a]anthracene 10. Chrysene 11. Benzo[b]fluoranthene 12. Benzo[k]fluoranthene 13. Benzo[a]pyrene 14. Perylene-d Indeno[1,2,3-cd]pyrene 16. Dibenzo[a,h]anthracene 17. Benzo[g,h,i]perylene 1. Phenol 2. 2-Chlorophenol 3. 2-Methylphenol 4. o-bromophenol 5. 3-Methylphenol 6. Nitrophenol 7. 2,4-Dimethylphenol ,4-Dichlorophenol 9. 4-Chloro-3-methylphenol 10. 2,4,6-Trichlorophenol Nitrophenol 12. 2,3,4,6-Tetrachlorophenol 13. Pentachlorophenol Sample Preparation Min Sample Pretreatment: Dry 10 g soil spiked with PAHs with sodium sulphate and reflux 4 hours with 100 ml methylene chloride: n-hexane (1:1) in a Soxhlet extractor. Evaporate the extracts to 1 ml under N 2 at 25 C, then dilute to 3 ml with n-hexane Min Sample Pretreatment: mL water spiked with phenols, if sample containing fine sediment may require prefiltration. 13 Condition SPE tube with 5 ml n-hexane Load 3 ml sample onto SPE tube Wash with 2 ml n-hexane Elute with 5 ml methylene chloride: n-hexane (2:3) Concentrate to 0.5 ml with N 2 at 25 C, add 0.5 ml internal standard (Perylene-d12). SPE/GC SPE tube: CNWBOND PSA, 1 g/6 ml (2.CA ) or 500 mg/6 ml (2.CA ) Column: CD-5MS, 60 m 0.25 mm I.D., 0.25 µm film ( ) Temp.: 100 C (1 min) to 300 C at 6 C/min, hold 30 min Det. MSD, 280 C, scan range m/z Carrier gas: Helium, 1.0 ml/min Injection: 1 µl 280 C, splitless (10 min delay) Condition SPE tube with 6 ml methyl t-butyl ether, 6 ml methanol, 6 ml deionized water Load 100 ml aqueous sample onto SPE tube Elute with 5mL methyl t-butyl ether and allow elution to proceed at a dropwise rate. SPE/GC SPE tube: Poly-Sery PSD, 250 mg/6 ml (2.CA ) or 500 mg/6 ml (2.CA ) Column: CD-5, 15 m 0.53 mm I.D., 0.5 µm film ( ) Temp.: 65 C to 185 C at 10 C/min, hold 1 min, then to 275 C at 20 C/min, hold 5 min. Det. FID, 330 C Carrier gas: Nitrogen, 1.0 ml/min Injection: 1 µl 200 C, splitless (45 sec delay)

43 HPLC HPLC Columns...42 Athena Serials Athena C18-WP...42 Athena C18-BIO...44 Athena C Athena C Athena Silica...46 Athena NH Cnwsil Serials Cnwsil C Cnwsil C Cnwsil Silica...49 Cnwsil SAX and SCX...49 Cnwsil HILIC...50 HPLC Accessories...51 Precolumn and Inline Filters...51 Inlet Solvent Filters...51 PEEK Tubing...52 Dupont FEP Fluoropolymer Tubing...53 Stainless Steel Tubing...54 Rheodyne High Pressure Valves...54 HPLC Applications...56

44 HPLC Columns 42 HPLC HPLC Columns HPLC Columns HPLC is widely used in chemistry, life science, and pharmaceutical research. Compared with chromatographic supports such as polymeric and graphitic carbon materials, silicabased columns are chosen by most chemist for the selectivity and higher efficiencies. To select the appropriate column for your application, you should choose the phase type, particle size, and column size. Athena Serials Athena HPLC columns are based on high purity spherical silica with low metal residues, providing excellent peak shape for acidic, basic and neutral compounds. The strong mechanical stability and tight quality control guarantee the long lifetime and reproducibility. Seven bonded phases provide broad selectivity for method development. Athena C18-WP Bonded with octadecyl groups Excellent symmetrical peak shape for basic compounds Compatible with 100% aqueous mobile phase High surface area leads to high loadability Stable with mobile phase at ph The special bond technology of Athena C18-WP column enables the use of 100% aqueous mobile phase, which is necessary for some polar analytes. The ph stability allows the mobile phase at ph with long lifetime. The high ph mobile phase can provide good peak symmetry for basic compounds. (A) (B) Specification: Bonded phase Athena C18-WP Particle size (μm) 3 and 5 Pore size (Å) 100 Pore volume (ml/g) 1.1 Endcapped Yes Surface area (m 2 /g) 450 Metals content (ppm) <10 Carbon load 17% ph range Temperature ( C) Aqueous Compatibility Dewetting When working with low organic mobile phases, complete loss of retention can be observed. The phenomenon of dewetting is a shortcoming of conventional reverse phase columns. Dewetting test Some reversed phase columns show durability in 100% aqueous eluent, but when the flow is stopped and restarted, the retention lose. Athena C18-WP column shows superior durability in this test. Retention time and efficiency keeps 90% above after flow stop. Dewetting Test A= Before flow stop B= After flow stop. Column: Athena C18-WP, 4.6 x 150 mm, 5μm Eluent: Methanol : Water (70/30) Flow Rate: 1.0 ml/min Det.: UV 254 nm Temp.: 30 C Sample: 1. Uracil 2. Toluene 3. Naphthalene

45 HPLC Columns Retention to Initial (%) Time (hours) Athena C18-WP Stability at ph 1.5 After the initial injection, the mobile phase was changed to 100% water. After 2 hours, the flow was reduced from 1.0 ml/min to 0.0 ml/min over 10 minutes. The pump consequently stopped for 1 hour. After the stoppage period the flow was restarted again smoothly. Within 10 minutes the flow was increased from 0.0 ml/min to 1.0 ml/min, and then changed to test condition for next injection. ph Stability Common silica packings are limilted to working between ph 2 and ph 7, because low ph (<2) causes hydrolysis of the siloxane bonds destroying bonded layer and high ph (>7) causes silica dissolution. Acidic Resistance at ph 1.5 Column: Athena C18-WP, 4.6 x 150 mm, 5μm Eluent: Acetonitrile : 0.1% TFA (ph 1.5) (50/50) Flow Rate: 1.0 ml/min Det.: UV 254 nm Temp.: 30 C Sample: Toluene 43 Efficiency to Initial (%) Time (hours) Athena C18-WP Stability at ph 11.0 Alkalic Resistance at ph 11.0 Column: Athena C18-WP, 4.6 x 150 mm, 5μm Eluent: Methanol : 0.5% Ammonium hydroxide (ph 11.0) (20/80) Flow Rate: 1.0 ml/min Det.: UV 254 nm Temp.: 30 C Sample: Dipropyl phthalate Athena C18-WP columns can work with eluents from ph 1.5 to 10. Wide ph range makes it possible for special analytes. Art. Phase Particle size Length ID Athena C18-WP 5μm 50mm 4.6mm Athena C18-WP 5μm 100mm 4.6mm Athena C18-WP 5μm 150mm 4.6mm Athena C18-WP 5μm 200mm 4.6mm Athena C18-WP 5μm 250mm 4.6mm Athena C18-WP 5μm 50mm 2.1mm Athena C18-WP 5μm 100mm 2.1mm Athena C18-WP 5μm 150mm 2.1mm Athena C18-WP 5μm 200mm 2.1mm Athena C18-WP 5μm 250mm 2.1mm Athena C18-WP 3μm 50mm 4.6mm Athena C18-WP 3μm 100mm 4.6mm Athena C18-WP 3μm 150mm 4.6mm Athena C18-WP 3μm 200mm 4.6mm Athena C18-WP 3μm 250mm 4.6mm Athena C18-WP 3μm 50mm 2.1mm Athena C18-WP 3μm 100mm 2.1mm Athena C18-WP 3μm 150mm 2.1mm Athena C18-WP 3μm 200mm 2.1mm Athena C18-WP 3μm 250mm 2.1mm HPLC GC Columns For more information about this product, please refer to pages

46 HPLC Columns Athena C18 Bonded with octadecyl groups High purity silica with metal residue < 10 ppm provides excellent peak shape Suitable for most method where a C18 column is needed Strong retention for polar compounds When a common commercial C18 column is needed for your analysis or method development, an Athena C18 column can be a good choice. The high purity silica with low metal residue leads to the symmetrical peak shape and high efficiency. Strong retention for polar compounds offers high selectivity for polar analytes. 44 HPLC Specification: Bonded phase Athena C18 Particle size (μm) 5 and 10 Pore size (Å) 120 Pore volume (ml/g) 1.0 Endcapped Yes Surface area (m 2 /g) 300 Metals content (ppm) <10 Carbon load 17% ph range 2-8 Temperature ( C) Art. Phase Particle size Length ID Athena C18 5μm 50mm 4.6mm Athena C18 5μm 100mm 4.6mm Athena C18 5μm 150mm 4.6mm Athena C18 5μm 200mm 4.6mm Athena C18 5μm 250mm 4.6mm Athena C18 5μm 50mm 2.1mm Athena C18 5μm 100mm 2.1mm Athena C18 5μm 150mm 2.1mm Athena C18 5μm 200mm 2.1mm Athena C18 5μm 250mm 2.1mm Athena C18 10μm 150mm 4.6mm Athena C18 10μm 250mm 4.6mm Athena C18-BIO Bonded with octadecyl groups 300Å pore size particle for large molecular like peptides High efficiency and long lifetime Stable in a wide ph range - from 1.5 to Å pore size, improved high density bonding and full endcapping make it suitable to separate high molecular weight compounds, especially peptides and proteins. And it is stable with acidic or alkali mobile phase, which is sometimes necessary in method development. PEEK Fittings For more information about this product, please refer to page 52. Specification: Bonded phase Athena C18-BIO Particle size (μm) 5 Pore size (Å) 300 Pore volume (ml/g) 0.9 Endcapped Yes Surface area (m 2 /g) 100 Metals content (ppm) <10

47 HPLC Columns Carbon load 8% ph range Temperature ( C) Art. Phase Particle size Length ID Athena C18-BIO 5μm 50mm 4.6mm Athena C18-BIO 5μm 100mm 4.6mm Athena C18-BIO 5μm 150mm 4.6mm Athena C18-BIO 5μm 200mm 4.6mm Athena C18-BIO 5μm 250mm 4.6mm Athena C18-BIO 5μm 50mm 2.1mm Athena C18-BIO 5μm 100mm 2.1mm Athena C18-BIO 5μm 150mm 2.1mm Athena C18-BIO 5μm 200mm 2.1mm Athena C18-BIO 5μm 250mm 2.1mm 45 Athena C8 Bonded with octyl groups Faster separation than C18 phase, less retention for hydrophobic analytes Exceptional peak shape for basic, acidic and neutral compounds Long lifetime and excellent reproducibility Athena C8 column has less retention of compounds. It is a better choice when faster analysis is needed than C18 columns. The high quality packings provide excellent peak shape and long lifetime. HPLC Specification: Bonded phase Athena C8 Particle size (μm) 5 Pore size (Å) 120 Pore volume (ml/g) 1.0 Endcapped Yes Surface area (m 2 /g) 300 Metals content (ppm) <10 Carbon load 10% ph range Temperature ( C) Art. Phase Particle size Length ID Athena C8 5μm 50mm 4.6mm Athena C8 5μm 100mm 4.6mm Athena C8 5μm 150mm 4.6mm Athena C8 5μm 200mm 4.6mm Athena C8 5μm 250mm 4.6mm Athena C8 5μm 50mm 2.1mm Athena C8 5μm 100mm 2.1mm Athena C8 5μm 150mm 2.1mm Athena C8 5μm 200mm 2.1mm Athena C8 5μm 250mm 2.1mm SPE Columns For more information about this product, please refer to pages 4-26.

48 HPLC Columns 46 HPLC HPLC Injector For more information about this product, please refer to page 54. Athena C4 Bonded with butyl groups 300Å pore size particle for large molecular C4 bonded phase with fast separation High efficiency and excellent peak shape Athena C4 column has less retention of compounds. It is a better choice when faster analysis is needed than C8 or C18 columns. The high quality packings provide excellent peak shape and long lifetime. And the 300Å pore size makes it suitable for analysis of large molecuar compounds. Specification: Bonded phase Athena C4 Particle size (μm) 5 Pore size (Å) 300 Pore volume (ml/g) 0.9 Endcapped Yes Surface area (m 2 /g) 100 Metals content (ppm) <10 Carbon load 3% ph range Temperature ( C) Art. Phase Particle size Length ID Athena C4 5μm 150mm 4.6mm Athena C4 5μm 250mm 4.6mm Athena C4 5μm 150mm 2.1mm Athena Silica Spherical silica packing, non-bonded phase Metal impurities less than 10 ppm Outstanding peak shape Specification: Bonded phase Silica Particle size (μm) 5 Pore size (Å) 120 Pore volume (ml/g) 1.0 Surface area (m 2 /g) 300 Metals content (ppm) <10 ph range 2-8 Temperature ( C) Art. Phase Particle size Length ID Athena Silica 5μm 50mm 4.6mm Athena Silica 5μm 100mm 4.6mm Athena Silica 5μm 150mm 4.6mm Athena Silica 5μm 200mm 4.6mm Athena Silica 5μm 250mm 4.6mm Athena Silica 5μm 50mm 2.1mm Athena Silica 5μm 100mm 2.1mm Athena Silica 5μm 150mm 2.1mm Athena Silica 5μm 200mm 2.1mm Athena Silica 5μm 250mm 2.1mm

49 HPLC Columns Athena NH 2 Bonded with amino-propyl groups Applicable for both reversed and normal phase Carbohydrates and sugars are separated in the reversed phase method Specification: Bonded phase Athena NH 2 Particle size (μm) 5 Pore size (Å) 120 Pore volume (ml/g) 1.0 Endcapped No Surface area (m 2 /g) 300 Metals content (ppm) <10 Carbon load 4% ph range 2-8 Temperature ( C) Art. Phase Particle size Length ID Athena NH 2 5μm 50mm 4.6mm Athena NH 2 5μm 100mm 4.6mm Athena NH 2 5μm 150mm 4.6mm Athena NH 2 5μm 200mm 4.6mm Athena NH 2 5μm 250mm 4.6mm Athena NH 2 5μm 50mm 2.1mm Athena NH 2 5μm 100mm 2.1mm Athena NH 2 5μm 150mm 2.1mm Athena NH 2 5μm 200mm 2.1mm Athena NH 2 5μm 250mm 2.1mm HPLC Cnwsil Serials Based on spherical porous silica, Cnwsil HPLC columns provide superior performance and high resolution separation, representing enhanced chemical stability, excellent peak shape with basic compounds. Column to column reproducibility meets the demands in analysis. The bonding and endcapping chemistries help achieve an extraordinary resistance and column lifetime when running at extreme ph levels. Sample Loop For more information about this product, please refer to pages 55. Cnwsil C18 Bonded with octadecyl groups Providing excellent peak shapes for basic, acidic and neutral compounds High hydrophobicity phases Good batch to batch, column to column reproducibility Stable at ph from 1.5 to 10 Compatible with 100% aqueous mobile phases Cnwsil C18 reversed phase columns, packed with high-purity spherical silica, providing superior performance in terms of efficiency and inertness. The low metal content and low residual silanols level help obtain excellent peak shapes for basic, acidic and neutral analyst. High hydrophobicity results in better rentensin for non-polar analytes. High density bonding and double endcapping extend the operating ph range from 1.5 to 10. The columns can be used with 100% aqueous mobile phase compatible C18 without phase collapse. Specification: Bonded phase Cnwsil C18 Particle size (μm) 3.5 and 5

50 HPLC Columns Pore size (Å) 90 Pore volume (ml/g) 1.0 Endcapped Yes Surface area (m 2 /g) 380 Metals content (ppm) <10 Carbon load 18% ph range Temperature ( C) HPLC Art. Phase Particle size Length ID Cnwsil C18 3.5μm 4.6mm 50mm Cnwsil C18 3.5μm 4.6mm 100mm Cnwsil C18 3.5μm 4.6mm 150mm Cnwsil C18 3.5μm 2.1mm 50mm Cnwsil C18 3.5μm 2.1mm 100mm Cnwsil C18 3.5μm 2.1mm 150mm Cnwsil C18 5μm 4.6mm 50mm Cnwsil C18 5μm 4.6mm 100mm Cnwsil C18 5μm 4.6mm 150mm Cnwsil C18 5μm 4.6mm 200mm Cnwsil C18 5μm 4.6mm 250mm Cnwsil C18 5μm 2.1mm 50mm Cnwsil C18 5μm 2.1mm 100mm Cnwsil C18 5μm 2.1mm 150mm Cnwsil C8 Bonded with octyl groups Providing excellent peak shapes for basic, acidic and neutral compounds Less hydrophobicity than C18 phase, fast analysis for polar analytes Good batch to batch, column to column reproducibility Stable at ph from 1.5 to 10 Compatible with 100% aqueous mobile phases Specification: Bonded phase Cnwsil C8 Particle size (μm) 3.5 and 5 Pore size (Å) 90 Pore volume (ml/g) 1.0 Endcapped Yes Surface area (m 2 /g) 380 Metals content (ppm) <10 Carbon load 13% ph range Temperature ( C) PEEK Tubing For more information about this product, please refer to page 53. Art. Phase Particle size Length ID Cnwsil C8 5μm 4.6mm 50mm Cnwsil C8 5μm 4.6mm 100mm Cnwsil C8 5μm 4.6mm 150mm Cnwsil C8 5μm 4.6mm 200mm Cnwsil C8 5μm 4.6mm 250mm Cnwsil C8 5μm 2.1mm 50mm Cnwsil C8 5μm 2.1mm 100mm Cnwsil C8 5μm 2.1mm 150mm Cnwsil C8 3.5μm 4.6mm 50mm

51 HPLC Columns Art. Phase Particle size Length ID Cnwsil C8 3.5μm 4.6mm 100mm Cnwsil C8 3.5μm 4.6mm 150mm Cnwsil C8 3.5μm 2.1mm 50mm Cnwsil C8 3.5μm 2.1mm 100mm Cnwsil C8 3.5μm 2.1mm 150mm Cnwsil Silica High purity spherical silica Excellent batch to batch, column to column reproducibility Stable at ph from 2 to 7 Specification: Bonded phase Cnwsil Silica Particle size (μm) 3.5 and 5 Pore size (Å) 90 Pore volume (ml/g) 1.0 Surface area (m 2 /g) 380 Metals content (ppm) <10 ph range 2-7 Temperature ( C) Art. Phase Particle size Length ID Cnwsil Silica 5μm 4.6mm 50mm Cnwsil Silica 5μm 4.6mm 100mm Cnwsil Silica 5μm 4.6mm 150mm Cnwsil Silica 5μm 4.6mm 200mm Cnwsil Silica 5μm 4.6mm 250mm Cnwsil Silica 5μm 2.1mm 50mm Cnwsil Silica 5μm 2.1mm 100mm Cnwsil Silica 5μm 2.1mm 150mm Cnwsil Silica 3.5μm 4.6mm 50mm Cnwsil Silica 3.5μm 4.6mm 100mm Cnwsil Silica 3.5μm 4.6mm 150mm Cnwsil Silica 3.5μm 2.1mm 50mm Cnwsil Silica 3.5μm 2.1mm 100mm Cnwsil Silica 3.5μm 2.1mm 150mm 49 HPLC Cnwsil SAX and SCX Syringe Filters For more information about this product, please refer to pages Cnwsil SAX columns are strong anion exchange columns, designed for the separation of small organic molecules and organic acids, especially for nucleic acids. Stable from ph 2.0 to ph 7.0 Provided to obtain high anion exchange efficiencies and resolution. Cnwsil SCX columns are strong cation exchange columns, designed for the separation of nucleic acids, amino acids, polyamines, drugs and other cationic species. Stable from ph 2.0 to ph 7.0. Specification: Bonded phase Cnwsil SAX Cnwsil SCX Particle size (μm) 5 5 Pore volume (ml/g) Surface area (m 2 /g) Metals content (ppm) <10 <10 Carbon load 3% 3% ph range Temperature ( C)

52 HPLC Columns Art. Phase Particle size Length ID Cnwsil SAX 5μm 4.6mm 150mm Cnwsil SAX 5μm 4.6mm 250mm Cnwsil SCX 5μm 4.6mm 150mm Cnwsil SCX 5μm 4.6mm 250mm Cnwsil HILIC Cnwsil HILIC (hydrophilic interaction liquid chromatography) columns are designed for the analysis of polar and hydrophilic compounds, e.g., amino acids, pyrimidine bases and nucleotides/oligonucleotides, alkaloids, carbohydrates and other small polar or ionizable compounds. 50 The strong solvent in HILIC is either water, formic acid/formate buffer or acetic acid/ acetate. In HILIC, water from the mobile phase forms a layer on the surface of the polar stationary phase that facilitates the transfer of polar compounds into the stationary phase for increased retention. Specification: HPLC Bonded phase Cnwsil HILIC Particle size (μm) 3.5 and 5 Pore size (Å) 90 Pore volume (ml/g) 1.0 Surface area (m 2 /g) 380 Metals content (ppm) <10 ph range Temperature ( C) Art. Phase Particle size Length ID Cnwsil HILIC 5μm 4.6mm 50mm Cnwsil HILIC 5μm 4.6mm 100mm Cnwsil HILIC 5μm 4.6mm 150mm Cnwsil HILIC 5μm 4.6mm 200mm Cnwsil HILIC 5μm 4.6mm 250mm Cnwsil HILIC 5μm 2.1mm 50mm Cnwsil HILIC 5μm 2.1mm 100mm Cnwsil HILIC 5μm 2.1mm 150mm Cnwsil HILIC 3.5μm 4.6mm 50mm Cnwsil HILIC 3.5μm 4.6mm 100mm Cnwsil HILIC 3.5μm 4.6mm 150mm Cnwsil HILIC 3.5μm 2.1mm 50mm Cnwsil HILIC 3.5μm 2.1mm 100mm Cnwsil HILIC 3.5μm 2.1mm 150mm

53 HPLC Accessories HPLC Accessories Precolumn and Inline Filters A-315 A-316 Precolumn filters have very small thru-holes for minimal band spreading and mixing. They feature stainless steel or biocompatible PEEK polymer bodies, and pressure rated to 9000 psi (620 bar) or 5000 psi (345 bar) and both accept 1/16 OD tubing and standard threaded high pressure fittings. Choose either the 0.5 µm or 2 µm version to filter particulates from your flow path. A-356 M-560 A-410 Precolumn Filters Upchurch Art A.0001 Precolumn Filter Assy 2µm, with A-101 Frit 1 pcs A A.0001 Precolumn Filter Assy 0.5µm, with A-102 Frit 1 pcs A A.0001 Filter PreColumn PEEK 2µm, with A-700 Frit 1 pcs A A.0001 Filter PreColumn PEEK 0.5µm, with A-701 Frit 1 pcs A M.0001 Precolumn MicroFilter Assy PEEK 0.5µm, with A-735 Frit 1 pcs M A.0001 Semi-Prep Filter 2µm, with OC-802 Frit 1 pcs A-410 Frits for Precolumn Filters Upchurch Art A.0001 Frit SS Nat 2µm Ø.062 x.065 x Ø pcs A A.0001 Frit SS Blk 0.5µm Ø.062 x.065 x Ø pcs A A.0001 Frit PEEK Grn 2µm Ø.062 x.065 x Ø pcs A A.0001 Frit PEEK Blu 0.5µm Ø.062 x.065 x Ø pcs A A.0001 Frit MicroFilter PEEK 0.5µm 1 pcs A C.0001 Mega Frit w/ring 2µm PCTFE Green 1 pcs OC-802 Placed between the pump and sample injection valve, Inline Solvent Filters trap particles released through normal piston seal wear. 51 HPLC Inline Solvent Filters and Frits Upchurch Art. A-102 A A µm Solvent Filter Inline, with A-100 Frit 1 pcs A A µm Biocompatible Filter Inline, with A-429 Frit 1 pcs A A.0001 Frit SS Nat 2µm Ø.094 x.065 x Ø pcs A-100X A.0001 Filter End Fitting 2µm PEEK 10 pcs A-429X OC-802 A-735 Inlet Solvent Filters General use Inlet Solvent Filter is good practice to filter your solvents to prevent pump damage. The large surface areas mean longer life without pump cavitation. Inlet Solvent Filter Upchurch Art. A-302A A A.0001 Solvent Filter Inlet with stem 10µm for 1/16 ID tubing 1 pcs A A302A.0001 Solvent Filter Inlet General 1/ µm for 1/16 ID tubing 1 pcs A-302A A.0001 Solvent Filter Inlet with stem 10µm for 1/8 ID tubing, Waters Type 1 pcs A A225A.0001 Solvent Filter Inlet 20µm for 1/8 ID tubing 1 pcs A-225A

54 HPLC Accessories High Pressure FingerTight Fittings, 10-32, for 1/16 OD tubing Upchurch Art F F Piece FingerTight Fitting PEEK Natural 1 pcs F F Piece Short FingerTight Fitting PEEK Natural 1 pcs F F Piece Long FingerTight Fitting PEEK Natural 1 pcs F Piece RheFlex FingerTight Fitting PEEK Natural 10 pcs F Piece FingerTight Fitting PEEK Nut Natural, with F-142 Ferrules 1 pcs F Piece RheFlex FingerTight Fitting PEEK Natural, with Ferrules 10 pcs F.0001 PEEK Ferrules, Natural 10 pcs F PEEK Ferrules, Natural 10 pcs F-130 F-300 Stainless Steel Fittings, 10-32, for 1/16 OD tubing Upchurch Art U.0001 Standard Nut 1 pcs U U.0001 Ferrule 1 pcs U RheFlex Long Nut, with Ferrules 10 pcs RheFlex Ferrules 10 pcs HPLC P-704 P-727 Column Plug Upchurch Art U.0001 Column Plug Delrin Black, for coned ports 10 pcs U-467BLKX High Pressure Connectors P-729 U-402 Upchurch Art. 8.00P Union PEEK Threads 1 pcs P P.0001 Tee PEEK.02 thru hole 1 pcs P P.0001 Cross Assy PEEK.02 thru 1 pcs P U.0001 Union ZDV SS.02 thru 1 pcs U U.0001 Tee Assy SS.02 thru 1 pcs U U.0001 Cross Assy SS.02 thru 1 pcs U-430 U-428 U-430 PEEK Tubing PEEK (polyetheretherketone) polymer tubing is biocompatible, chemically inert to most solvents, and can be used to replace stainless steel tubing in most liquid analytical systems. PEEK tubing can be used with stainless steel or polymer fittings and be used in high pressure rating (up to 7000 psi in many cases) or high temperature rating (maximum continuous use temperature of 100 C). 1531BXL XL 1536XL PEEK Tubing, 1/16 OD Upchurch Art Tub PEEK Blu 1/16 x.010 x 5ft 1 pcs 1531B 8.XL Tub PEEK Blu 1/16 x.010 x 100ft 1 pcs 1531BXL Tub PEEK Ora 1/16 x.020 x 5ft 1 pcs Tub PEEK Grn 1/16 x.030 x 5ft 1 pcs Tub PEEK Red 1/16 x.005 x 5ft 1 pcs XL Tub PEEK Red 1/16 x.005 x 100ft 1 pcs 1535XL Tub PEEK Yel 1/16 x.007 x 5ft 1 pcs XL Tub PEEK Yel 1/16 x.007 x 100ft 1 pcs 1536XL Tub PEEK Nat 1/16 x.055 x 5ft 1 pcs Tub PEEK Nat 1/16 x.040 x 5ft 1 pcs Tub PEEK Nat 1/16 x 25µm x 5ft 1 pcs Tub PEEK Nat 1/16 x.0025 x 5ft 1 pcs Tub PEEK Blk 1/16 x.004 x 5ft 1 pcs 1561

55 HPLC Accessories Upchurch Art Tub PEEK Pur 1/16 x.006 x 5ft 1 pcs Tub PEEK Gry 1/16 x.015 x 5ft 1 pcs 1565 PEEK Tubing, 1/8 OD Upchurch Art Tub PEEK Nat 1/8 x.080 x 5ft 1 pcs Tub PEEK Nat 1/8 x.062 x 5ft 1 pcs XL Capillary PEEK Tubing, 360 µm, 510 µm, 1/32 OD Upchurch Art Tub PEEK Nat 360µm x 50µm x 5ft 1 pcs Tub PEEK Nat 510µm x 125µm x 5ft 1 pcs Tub PEEK Nat 510µm x 255µm x 5ft 1 pcs Tub PEEK Nat 1/32 x.015 x 5ft 1 pcs Tub PEEK Ora 1/32 x.020 x 5ft 1 pcs Tub PEEK Nat 1/32 x.008 x 5ft 1 pcs Tub PEEK Red 1/32 x.005 x 5ft 1 pcs Tub PEEK Yel 1/32 x.007 x 5ft 1 pcs Tub PEEK Blk 1/32 x.0035 x 5ft 1 pcs Tub PEEK Nat 1/32 x.0025 x 5ft 1 pcs Tub PEEK Gry 1/32 x.009 x 5ft 1 pcs Tub PEEK Blu 1/32 x.010 x 5ft 1 pcs HPLC 1523 Dupont FEP Fluoropolymer Tubing With virtually identical chemical resistance to PFA at a lower price, FEP tubing is great for general, low pressure applications. Compared to PTFE, FEP (fluorinated ethylene propylene) tubing is held to tighter tolerances and has lower gas permeability. Much of FEP tubing is translucent, making it possible to watch fluid flow FEP Tubing Upchurch Art Tub FEP Nat 1/8 x.062 x 20ft 1 pcs L Tub FEP Nat 1/8 x.062 x 50ft 1 pcs 1521L 8.XL Tub FEP Nat 1/8 x.062 x 100ft 1 pcs 1521XL Tub FEP Nat 1/16 x.030 x 10ft 1 pcs Tub FEP Nat 1/8 x.062 x 10ft 1 pcs Tub FEP Nat 3/16 x.125 x 20ft 1 pcs Tub FEP Nat 3/16 x.125 x 10ft 1 pcs Tub FEP Nat 1/16 x.010 x 10ft 1 pcs Tub FEP Nat 1/16 x.020 x 20ft 1 pcs XL Tub FEP Nat 1/16 x.020 x 100ft 1 pcs 1548XL PEEK Tubing Cutter Upchurch Art PEEK tubing cutter 1 pcs N/A A-620 Bottle Caps Upchurch Art A.0001 Bottle Cap Assy for GL-45, 1 L bottles, for 1/8 OD tubing, Red 1 pcs A A.0001 Bottle Cap Assy for GL-38, 4 L bottles, for 1/8 OD tubing, Black 1 pcs A A.0001 Bottle Cap Plug for luer hole, UHMWPE 1 pcs A-626

56 HPLC Accessories Stainless Steel Tubing We provide seamless, precut 316 stainless steel tubing to meet the exacting requirements of today s analyses. U-115 Stainless Steel Tubing Upchurch Art U.0001 Tub SS 1/16 x.010 x 5cm 1 pcs U U.0001 Tub SS 1/16 x.010 x 20cm 1 pcs U U.0001 Tub SS 1/16 x.020 x 5cm 1 pcs U U.0001 Tub SS 1/16 x.020 x 20cm 1 pcs U U.0001 Tub SS 1/16 x.030 x 5cm 1 pcs U U.0001 Tub SS 1/16 x.030 x 20cm 1 pcs U Rheodyne High Pressure Valves HPLC 7725I Analytical Injectors The 316 stainless steel models 7725 and 7725i, and PEEK models 9725 and 9725i are Rheodyne s most advanced manual sample injectors for analytical HPLC. A simple, three-step operation involves inserting the syringe into the needle port while in the LOAD position and turning the handle to INJECT. The sample is on its way through your system and when the handle returns to LOAD, the injector is ready for the next injection & 7725i Analytical-Scale Sample Injectors Rheodyne Art /6 Syr Load Inj, w/mbb, SS 1 pcs I /6,MAN,SYR,SS,W/Pos Sensor 1 pcs 7725I Needle Guide 1 pcs Vespel Rotor Seal 1 pcs Needle Port Cleaner 1 pcs TZ Rotor Seal for pcs Needle, 22Ga Luer Tip 1 pcs CER,Stator Face, Assy for pcs RheBuild Kit for 7725(I) 1 pcs & 9725i Analytical-Scale Sample Injectors Rheodyne Art /6 Syr Load Inj, w/mbb, PK 1 pcs I /6 Syr Load Inj w/ Pos Sensor, PK 1 pcs 9725I RheBuild Kit for 9725/9725I 1 pcs Preparative-Scale Injectors Models and 3725i-038 (316 stainless steel) and 3725 and 3725i (biocompatible PEEK) are the most suitable manual valves to use with large sample volumes, high flow rates and preparative columns. 3725i & 3725i-038 and 3725 & 3725i Preparative-Scale Sample Injectors Rheodyne Art /6,SYR,SS 1 pcs /6,MAN,SYR P,SS, w/switch 1 pcs 3725I /6,Manual,SYR P, Peek 1 pcs 3725

57 HPLC Accessories Rheodyne Art /6,MAN,SYR P,PK, w/switch 1 pcs 3725I PK Rotor Seal for 3725/3725i 1 pcs PK Stator Face Seal for pcs Needle,16GA,Peek 1 pcs Needle,16GA,SS 1 pcs RheBuild Kit for 3725/ pcs PEEK Sample Loops Rheodyne Stainless Steel Sample Loops for 7725, 7725i Injectors Rheodyne Art uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs uL,SS,Sample Loop,30 Degree 1 pcs mL,SS,Sample Loop,30 Degree 1 pcs mL,SS,Sample Loop,30 Degree 1 pcs mL,SS,Sample Loop,30 Degree 1 pcs Rheodyne Stainless Steel Sample Loops for , 3725i-038 Injectors Rheodyne Art mL Prep Sample Loop SS 1 pcs mL Prep Sample Loop SS 1 pcs mL Prep Sample Loop SS 1 pcs mL Prep Sample Loop SS 1 pcs Rheodyne PEEK Sample Loops for 9725, 9725i Injectors Rheodyne Art uL PEEK Sample Loop (9725 only) 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs uL PEEK Sample Loop 1 pcs mL PEEK Sample Loop 1 pcs mL PEEK Sample Loop 1 pcs mL PEEK Sample Loop 1 pcs mL PEEK Sample Loop 1 pcs Rheodyne PEEK Sample Loops for 3725, 3725i Injectors Rheodyne Art mL Prep Sample Loop PEEK 1 pcs mL Prep Sample Loop PEEK 1 pcs mL Prep Sample Loop PEEK 1 pcs mL Prep Sample Loop PEEK 1 pcs HPLC

58 HPLC Applications HPLC Applications Food additives Oligonucleotides 1.Benzoic acid 2.Sorbic acid 3.Sodium saccharin 1.CAAGACGCAA 2.CAACCAACGT 3.GGTGATCAAC 4.CCCTGAACAA 5.CGTGTATTGG 6.GGTCCTATAC HPLC Min Column: Athena C18, 4.6 x 250 mm, 5μm ( ) Eluent: 20mM Ammonium acetate : Methanol (5/95) Flow Rate: 1.0 ml/min Det.: UV 254nm Temp.: 30 C Min Column: Athena C18-BIO, 4.6 x 150 mm, 5μm( ) Eluent: 10mM Phosphoric acid : Acetonitrile (90/10) Flow Rate: Det.: Temp.: 1.0 ml/min UV 260nm 25 C Sulfonamides 1.Sulfanilamide 2.Sulfisomidine 3.Sulfadiazine 1 4.Sulfamethazine 5.Sulfamonomethoxine Tricyclic antidepressants 1.Protriptyline 2.Nortriptyline 3.Amitriptyline Min Column: Athena C18-WP, 4.6 x 150 mm, 5μm ( ) Eluent: 10mM Phosphoric acid : Acetonitrile (85/15) Flow Rate: Det.: Temp.: 1.0 ml/min UV 254nm 40 C Column: Min Athena C8, 4.6 x 150 mm, 5μm( ) Eluent: Methanol : 20mM Potassium phosphate (ph 7.0) (20/80) Flow Rate: 1.0 ml/min Det.: UV 254nm Temp.: 40 C

59 HPLC Applications Nitroanilines Nucleosides 1.o-Nitroaniline 2.m-Nitroaniline 3.p-Nitroaniline 2 1.Cytidine 2.Deoxycytidine 3.Uridine 4.Inosine 5.Guanosine 6.Deoxyguanosine 7.Adenosine Min Min Column: Athena Silica, 4.6 x 150 mm, 5μm ( ) Eluent: Chloroform : n-hexane (60/40) Flow Rate: 0.8 ml/min Det.: UV 254 nm Temp.: Ambient Column: Cnwsil C18, 4.6 x 150 mm, 5μm ( ) Eluent: 20mM KH 2 PO 4 -H 3 PO 4 (ph 3.2) : Acetonitrile(97/3) Flow Rate: 1.0 ml/min Det.: UV 254 nm Temp.: 30 C HPLC Malto-oligosaccharides Organic Acids 1.Glucose 2.Maltose 3.Maltotriose 4.Maltotetraose 5.Maltopentaose 1.Malonic acid 2.Nortriptylline 3.Acetic acid 4.Lactic acid 5.Citric acid 6.Succinic acid Min Column: Athena NH 2, 4.6 x 150 mm, 5μm ( ) Eluent: Flow Rate: Det.: Temp.: Acetonitrile : Water(50/50) 1.0 ml/min RID 40 C Min Column: Athena C18, 4.6 x 150 mm, 5μm ( ) Eluent: 30mM Sodium Phosphate(pH 2.5 with H 3 PO 4 ) Flow Rate: Det.: Temp.: 1.0 ml/min UV 210 nm 40 C

60 GC GC Columns...59 General Purpose Columns...59 CD CD CD CD CD CD CD CD CD-WAX...66 Special Purpose Columns...67 CD-1MS...67 CD-5MS...67 CD-35MS...68 CD-ACIDWAX...69 CD-BASEWAX...70 CD-PONA...71 CD CD CD CD-VOC...72 CD-MoleSieve...72 CD-PLOT Q...73 CD-PLOT U...73 CD-Al 2 O 3 /KCl...73 CD-Al 2 O 3 /Na 2 SO Stationary Phase and Supports...75 Stationary Phase...75 Supports...77 Chromosorb Diatomite Supports...77 Century Series Chromosorb...79 Porapak...80 HayeSep...82 Zeolite Molecular Sieves...83 Tenax...84 Graphitized Carbon Blacks (GCB)...84 GC Accessories...86 Septa...86 Ferrules...86 Tubing...91 Tubing Cutters...91 Swagelok Tubing Fittings...92 Glass Wool and Quartz Wool...94 Fused Silica Connectors...94 GC Applications...95

61 GC Columns GC Columns CD Serials High Performance Capillary Columns As a result of our efforts in research and development and the continuous improvements in our manufacturing techniques we present CD a series of high performance capillary columns for gas chromatography. CD capillary columns provide: high thermal stability reduced column bleed more inert columns O CH3 Si CH3 n Stationary phase - OV serials For more information about this product, please refer to page 76. General Purpose Columns CD-1 Phase: bonded, poly(dimethylsiloxane) Nonpolar methylsilicone columns that separate sample components according to boiling point. This bonded poly-mer matches the polarity of its nonbonded predecessors. This column meets USP G1,G2,G9 requirements. Similar phases: OV-1, DB-1, SE-30, HP-1, Ultra-1,SPB-1, CP-SIL 5 CB, Rtx-1, 007-1, BP1, MDN-1, AT-1, OV- 101 Temp. Limits: -60 C to 325/350 C Art. ID(mm) Length(m) Df(um) GC

62 GC Columns Art. ID(mm) Length(m) Df(um) GC O Si m O CH3 Si CH3 Septa - 11mm Septa and Shimadzu Plug For more information about this product, please refer to page 86. n CD-5 Phase: bonded, Poly(5% diphenyl/95% dimethylsiloxane) The low phenyl content, 5%, improves thermal stability of the phase, while still providing essentially a boiling point elution order, and a slight increase in selectivity, especiallly for aromatic compounds.this column meets USP G27 and G36 requirements. Similar phases: SE-54, SE-52, DB-5, HP-5, AT-5,, ZB-5 Ultra-2,SPB-5, CP-SIL 8, Rtx-5, 007-5, BP5, MDN-5 Temp. Limits: -60 C to 325/350 C Art. ID(mm) Length(m) Df(um)

63 GC Columns CD-35 Phase: bonded, Poly(35% diphenyl/65%dimethylsiloxane) O Si CH3 O Si CD-35 columns have intermediate polarity as a result of a greater phenyl content (35%). These columns are useful for analyses of polar compounds, because these compounds are retained longer, relative to nonpolar compounds. This column meets USP G42 requirements. Similar phases: DB-35, Rtx-35, SPB-35, AT-35 m CH3 n Temp. Limits: 0 C to 280/320 C Art. ID(mm) Length(m) Df(um) GC CD-50 CH3 Phase: bonded, Poly (50% diphenyl/50% dimethylsiloxane) O Si O Si The highest phenyl content of the common phenyl containing phases, and hence the highest polarizability. Useful for analyses of polar materials and to provide confirmational information. This column meets USP G3 requirements. m CH3 n Similar phases: OV-17, DB-17, HP-50+, HP-17, SPB-50,SP-2250, Rtx-50, CP-SIL 24 CB, , ZB-50 Temp. Limits: 30 C to 280/300 C

64 GC Columns 62 GC Ferrule - Short Ferrule and Long Ferrule For more information about this product, please refer to page 86. Art. ID(mm) Length(m) Df(um) CD-1301 Phase: bonded, 6% cyanopropyl-phenyl 94% dimethylpolysiloxane CH3 The medium polar of the phases. Ideal for pesticide analyses. This column meets USP G43 requirements. Similar phases: HP-1301, DB-1301, SPB-1301,Rtx-1301, CP-1301, Temp. Limits: -20 C to 280/300 C O Si O Si (CH2)3 CN m CH3 n Art. ID(mm) Length(m) Df(um)

65 GC Columns Art. ID(mm) Length(m) Df(um) O Si (CH2)3 CN m O CH3 Si CH3 Snoop - Fused Silica Connectors For more information about this product, please refer to page 94. n CD-1701 Phase: bonded, 14% cyanopropyl-phenyl 86% dimethylpolysiloxane Intermediate polarity CD-1701 columns have a mixed functionality which provides unique elution order characteristics, relative to the phenyl-containing silicone phases. This column meets USP G46 requirements. Similar phases: OV-1701, DB-1701, CP-SIL 19 CB, HP-1701, Rtx-1701, SPB-1701, , BP10, ZB-1701 Temp. Limits: -20 C to 260/280 C Art. ID(mm) Length(m) Df(um) GC

66 GC Columns Art. ID(mm) Length(m) Df(um) GC O Si (CH2)3 CN O CH3 Si CH3 Disposable Gloves For more information about this product, please refer to page 38. n CD-225 Phase: bonded, Poly(50% cyanopropylphenyl/50% dimethylsiloxane) This bonded, crosslinked poly(50% cyanopropylphenyl 50% dimethylsiloxane phase is excellent for separating cis and trans FAMEs. CD-225 columns have intermediate to high polarity. This column meets USP G7 requirements Similar phases: DB-225, HP-225, OV-225, Rtx-225,CP-SIL 43, , BP225 Temp. Limits: 40 C to 220/240 C Art. ID(mm) Length(m) Df(um)

67 GC Columns Art. ID(mm) Length(m) Df(um) CD-210 O CH3 Si Phase: bonded, 50% trifluoropropyl-methylpolysiloxane The high polar column is recommended for environmental analyses, especially for o-, m- and p-substituted aromatic hydrocarbons.this column meets USP G6 requirements. Similar phases: OV-210, DB-210, Rtx-200, Temp. Limits: 40 C to 240/260 C (CH2)2 CF3 n Art. ID(mm) Length(m) Df(um) GC Dichloromethane For more information about this product, please refer to page 145.

68 H GC Columns CD-WAX O H C H C OH Phase: bonded, polyethylene glycol 20M This polar PEG-type phase is the bonded with much higher thermal stability. Because this phase offers higher polarity than any of the phenylsilicone phases, it is widely used for separation and purity analyses of many polar compounds, including alcohols, aromatics, and other solvents, flavors, fragrances, and FAMEs. This column meets USP G16 requirements. Similar phases: DB-Wax, Supelcowax, HP-Wax, Rtx-Wax, HP-INNOWAX, CP-Wax 52 CB, Stabilwax,007-CW, BP20, AT-Wax, ZB-Wax Temp. Limits: 20 C to 240/250 C H H n 66 GC Art. ID(mm) Length(m) Df(um) E0 8mm Screw Thread Vials For more information about this product, please refer to page 110.

69 GC Columns O CH3 Si Special Purpose Columns CD-1MS Phase: bonded, poly(dimethylsiloxane) The nonpolar methylsilicone columns have the phase with lowest bleeding. Ideal for GC/ MS and ECD applications and general analyses at trace level. Similar phases: DB-1ms,HP-1ms,RTX-1ms,CP-Sil 5 CB Temp. Limits: -60 C-325/350 C CH3 n Art. ID(mm) Length(m) Df(um) GC CH3 CD-5MS Phase: bonded, Poly(5% diphenyl/95% dimethylsiloxane) O Si O Si The low polar methylsilicone columns have the phase with lowest bleeding. Ideal for GC/ MS and ECD applications and general analyses at trace level. m CH3 n Similar phases:db-5ms,hp-5ms,rtx-5ms,cp-sil 8CBms Temp. Limits: -60 C -325/350 C

70 GC Columns 68 GC EA 9mm Screw Thread Vials For more information about this product, please refer to page 111. Art. ID(mm) Length(m) Df(um) CD-35MS Phase: bonded, Poly(35% diphenyl/65% dimethylsiloxane) CH3 The low polar methylsilicone columns have the phase with lowest bleeding. Ideal for GC/ MS and ECD applications and general analyses at trace level. Similar phases: DB-35ms, MDN-35 Temp. Limits: -20 C -280/300 C O Si O Si Art. ID(mm) Length(m) Df(um) m CH3 n

71 GC Columns Art. ID(mm) Length(m) Df(um) CD-ACIDWAX Phase: bonded, polyethylene glycol 2-nitroterephthalate This bonded PEG-type phase, incorporating acidic functional groups, displays an acidic character and is useful for analyses of volatile acidic compounds. This column meets USP G35 requirements. Similar phases: DB-FFAP, HP-FFAP, CP-SIL 58 CB, 007-FFAP, CP-FFAP CB, Nukol Temp. Limits: 20 C to 240/250 C GC Syringe Filters For more information about this product, please refer to pages Art. ID(mm) Length(m) Df(um)

72 GC Columns Art. ID(mm) Length(m) Df(um) Large Volume Sampler with Vacuum Manifold For more information about this product, please refer to page 30. CD-BASEWAX Phase: bonded, base-deactivated polyethylene glycol Specially prepared, base-deactivated polyethylene glycol columns designed for analyses of amines and other basic analytes. Similar phases: RTX Amine, PTA-5 Temp. Limits: 20 C -240/250 C GC HPLC Columns For more information about this product, please refer to pages Art. ID(mm) Length(m) Df(um)

73 GC Columns Art. ID(mm) Length(m) Df(um) CD-PONA Phase: bonded, poly(dimethylsiloxane) Highly reproducible column displaying more than 400,000 theoretical plates, designed for detailed analyses of petroleum products; used for PNA, PONA and PIANO type analyses. Similar phases: HP-PONA, Petrocol DH Temp. Limits: -60 C -300/340 C Art. ID(mm) Length(m) Df(um) CD-2887 Phase: bonded, poly(dimethylsiloxane) Developed and tested to meet or exceed column performance requirements for simulated distillation of petroleum fractions having boiling points up to 1000 F, according to ASTM Test Method D2887. Similar phases: DB-2887, Petrocol EX2887 Temp. Limits: -60 C -350 C 71 GC Art. ID(mm) Length(m) Df(um) CD-608 Specially tested with 18 chlorinated pesticides at low concentration with an electron capture detector (ECD). These columns meet the criteria for minimum breakdown of 4,4'-DDT and endrin for EPA Methods 508, 608, 8080, 8081, and SW-Pesticides. Similar phases: DB-608,HP-608,SPB-608, Temp. Limits: 40 C-280/300 C Art. ID(mm) Length(m) Df(um) General Purpose Columns For more information about this product, please refer to pages

74 GC Columns CD-624 Specially tested for separation, efficiency, and baseline bleed; designed for purge-andtrap analyses of volatile halogenated,nonhalogenated, and aromatic contaminants from air, drinking water, wastewater, and soil. Similar phases: HP-624, HP-VOC, DB-624, CP-624, DB-VRX, SPB-624, RTX-624, RTX- Volatiles,BP624, , VOCOL Temp. Limits: -20 C-240/260 C Art. ID(mm) Length(m) Df(um) CD-VOC 72 GC These intermediate polarity columns, designed for volatile organic compounds (VOCs) analysis, ensure greater retention and resolution of the more volatile compounds. Used for US EPA volatiles methods, including 502.2, 524.2, 624, 8240, 8260, and Similar phases: VOCOL, DB-VRX,HP-VOC,Rtx-Volatiles Temp. Limits: -40 C-300/320 C Art. ID(mm) Length(m) Df(um) CD-MoleSieve The Mol Sieve 5A PLOT columns separate permanent gases. Oxygen, nitrogen, carbon monoxide and methane can be separated in less than 5 minutes. More difficult separations, such as argon from oxygen, can be achieved by using subambient temperatures. Similar phases:hp-plot, Mol Sieve 5A PLOT Temp. Limits: -60 C-350 C Art. ID(mm) Length(m) Df(um)

75 GC Columns Art. ID(mm) Length(m) Df(um) CD-PLOT Q The CD-PLOT Q columns effectively resolves carbon dioxide and C1-C4 hydrocarbons at above ambient temperatures. It also is suitable for analyses of other gases, such as sulfur gases, and alcohols, ketones, aldehydes, and many polar compounds. Gasoline and other petroleum fractions can be analyzed as well. These columns exhibit very little bleed, even at the maximum temperature. Relative to packed columns (HayeSep Q and Porapak Q), CD-PLOT Q columns offer better resolution in less time. Similar phases: HP-PLOT Q,CP PoraPLOT Q, Rt-QPLOT, SupelQ PLOT Temp. Limits: -60 C-290/320 C Art. ID(mm) Length(m) Df(um) CD-PLOT U GC The CD-PLOT U columns effectively resolves C1-C7 hydrocarbons, carbon dioxide, air, methane. It also is suitable for analyses of other gases, such as alcohols, ketones, aldehydes, and many polar compounds. These columns exhibit very little bleed, even at the maximum temperature. Relative to packed columns (HayeSep N and Porapak N), CD- PLOT N columns offer better resolution in less time. Similar phases: HP-PLOT U, PoraPlot U, RTU PLOT Temp. Limits: -60 C-250/290 C Art. ID(mm) Length(m) Df(um) CD-Al 2 O 3 /KCl These chloride deactivated alumina PLOT columns allow for the separation of C1-C8 hydrocarbons. It is also used in the ASTM methods. The Alumina Chloride PLOT is less polar than other Alumina PLOT. Similar phases: HP-PLOT Al 2 O 3 KCl,CP-Al 2 O 3 /KCl PLOT, Rt-Alμmina PLOT Temp. Limits: -60 C-200 C

76 GC Columns Art. ID(mm) Length(m) Df(um) SPE Columns For more information about this product, please refer to pages CD-Al 2 O 3 /Na 2 SO 4 These sulfate deactivated alumina PLOT columns are highly dependable columns for fast and efficient hydrocarbon and petrochemical analysis. The selectivity of the sulfate deactivated alumina version allows for the separation of C1-C8 hydrocarbons. This column also provides elution of acetylene after n-butane. The Alumina Sulfate PLOT column is more polar than the Alumina Chloride PLOT. Similar phases: HP-PLOT Al2O3 S, GS-Alμmina, Alumina Sulfate PLOT Temp. Limits: -60 C-190 C Art. ID(mm) Length(m) Df(um) GC

77 Stationary Phase and Supports Stationary Phase and Supports Stationary Phase Chromosorb Diatomite Supports For more information about this product, please refer to page 77. Art. Description Qty Solvent Temp( C) Min/Max Apiezon L 25g C 20/ Bentone 34 50g T,C 20/ Bis(2-Butoxyethyl) phthalate 20g M 20/ Butane 1,4 diol Succinate 25g C Carbowax g C 20/ Carbowax g C 20/ Carbowax g C 20/ Carbowax g C 25/ Carbowax g M 40/ Carbowax g C 40/ Carbowax g C 40/ Carbowax g C 60/ Carbowax g C 60/ Carbowax 20M 50g C 60/ Carbowax 20M 50g C 60/ Carbowax 20M-TPA 50g C 60/ Citroflex A-4 50g A -25/ Citroflex 4 50g M -15/ Cyanoethylsucrose 50g A 20/ DC-200 (350 cstk) 50g C,T 0/ DC-11 50g C,T 0/ DC-200 (12,500 cstk) 50g C,T 0/ DC g DC g DC g A,T 20/ DC g A 5/ DC-HIVAC Grease 50g DC QF-1 50g A 0/ DC FS g A Dibutyl Phthalate 50g M -20/ Didecyl Phthalate 25g A 20/ Diethylene Glycol Adipate (DEGA) 25g A 20/ Diethylene Glycol Succinate (DEGS) 25g A 20/ Di(2-Ethylhexyl) sebacate 50g A -20/ Diglycerol 10g M 20/ Diisodecyl Adipate 50g M -20/ Diisodecyl Phthalate 50g A -20/ Dilauryl Phthalate 10g M 20/ Dimethylformamide UN2265 Flammable Liquid 50g M -20/ Dimethyl Sufoxide 50g A 20/ Dinonyl Phthalate 50g A 20/ EPON g C 65/ Ethylene Glycol Phthalate (EGP) 25g C Ethylene Glycol Succinate (EGS) 25g C 100/ FFAP 25g C 0/ Formamide 50g M 20/ Glycerol 50g M 20/ Halocarbon Oil g C 20/ Hallcomid M-18 OL 50g M,C 8/ Hexamethylphosphoramide (HMPA) 50g M 20/ HI-EFF-1BP 25g C 20/ Igepal CO g M 100/ GC

78 Stationary Phase and Supports Art. Description Qty Solvent Temp( C) Min/Max 76 GC OV serials Porapak For more information about this product, please refer to page Igepal CO g C 100/ Igepal CO g C 100/ B,B-Iminodipropionitrile 25g M -/ KEL-F Oil #3 25g A 0/ KEL-F Oil #10 50g A 20/ Lexan 25g C 220/ Mannitol 25g 170/ Neopentyl Glycol Adipate (NPGA) 25g C 50/ NUJOL 50g T 0/ OV-1(dimethyl, gum) 10g T 100/ OV-3(phenyl methyl dimethyl, 10% phenyl) 25g A 20/ OV-7(phenyl methyl dimethyl, 20% phenyl) 25g A 20/ OV-11(phenyl methyl dimethyl, 35% phenyl) 25g A 0/ OV-17(phenyl methyl, 50% phenyl) 25g A 20/ OV-22(phenyl methyl diphenyl, 65% phenyl) 10g A 20/ OV-25(phenyl methyl diphenyl, 75% phenyl) 10g A 20/ OV-61(diphenyl, 33% phenyl) 10g A 20/ OV-73(5.5% diphenyl) 10g T 20/ OV-101(dimethyl, fluid) 20g T 20/ OV-105(cyanopropylmethyl) 10g A 20/ OV-202(trifluoropropyl, fluid) 10g C 0/ OV-210(trifluoropropyl, fluid) 25g C 20/ OV-225(cyanopropylmethyl-phenylmethyl) 10g A 20/ OV-275(dicyanoallyl) 5g A 20/ OV-330(silicone Carbowax) 5g A 20/ OV-351(polyglycol-nitroterephthalic) 10g C 50/ OV-1701 (Dimethylphenyl cyano substitute) 3g A 20/ OV-235 5g C 50/ OV-245 5g A 50/ OV-255 5g A 50/ OV-1 Vinyl Modified 5g OV-17 Vinyl 3g OV-20 Vinyl Modified 3g OV-35 Vinyl Modified 3g OV-215 Vinyl Modified 10g OV-225 Vinyl Modified 3g OV-275 Vinyl Modified 3g OV-1701 Vinyl Modified 3g OV-101-OH Modified 5g OH.0003 OV-17-OH Modified 3g OV-31-OH Modified 3g OV-61-OH Modified 3g OV-1701-OH Modified 3g OH.0003 OV-225-OH Modified 3g OV-240-OH Modified 3g Phenyldiethanolamine 25g A 0/ Polyphenyl Ether 5-ring 25g C 20/ Polyphenyl Ether 6-ring 5g C 0/ Polypropylene Glycol 50g M 0/ Polyvinylpyrrolidinone (PVP) 50g M 20/ Propylene Glycol 50g C 0/ Reoplex g A 20/ SE-30((methyl silicone) 50g C 50/ SE-30 ((methyl silicone,gc Grade) 10g C 50/ SE-52(methyl silicone) 50g C 50/ SE-54((methyl silicone: 5% phenyl, 1% vinyl silicone) 50g C 100/ SF-96(methyl silicone) 50g C 20/250

79 Stationary Phase and Supports HayeSep For more information about this product, please refer to page 82. Art. Description Qty Solvent Temp( C) Min/Max Span 80 (Sorbitane Monooleate) 25g T 20/ Squalane 50g T 20/ Squalene 50g T 20/ Sucrose Acetate Isobutyrate (SAIB) 25g C 30/ Tergitol NPX 50g C 10/ THEED 25g M 20/ Tricresyl Phosphate [UN2574] 50g M 20/ Triethanolamine 50g M 25/ ,2,3-Tris(2-cyanoethoxy) propane (TCEP) 50g M 29/ Triton X g A 20/ Triton X g A 20/ Tween 80 50g M 20/ UCC L-45 50g / UCC W-98 50g / UCON LB-550-X 50g M 20/ UCON 50-HB-280-X 50g M 20/ UCON 50-HB g A 20/ UCON 50-HB g M 20/200 Solvent Code: A=Acetone, C=Chloroform, E=Ethyl Acetate,T=Toluene, M=Methanol Supports 77 Chromosorb Diatomite Supports Chromosorb Diatomite Supports Chromsorb P is a calcined diatomite. It is orange-pink in color and relatively hard. Chromosorb P generates high column efficiencies for hydrocarbons. Its surface is more adsorptive than the other Chromosorb diatomite grades due to high surface area. Chromsorb W is the most popular grade used for GC work. It is flux-calcined diatomite, is white in color and friable compared to other diatomite grades. It is of utmost importance to take care in handling this material during coating and packing procedures in order to achieve maximum performance. It is relatively nonadsorptive separating polar compounds. Chromosorb G is developed for the GC analysis of polar compounds. It has a low surface area and good handling characteristics. It is non-friable compared to other diatomite packings and will not generate fines during coating or packing procedures. Chromosorb 750 is the latest addition to the diatomite series. It is flux-calcined and has better handling characteristics than Chromosorb W. It is prepared from high purity diatomite crude with exhaustive acid-washing and effective silane treatment.its high degree of chemical inertness makes Chromosorb 750 an ideal packing for bio-medical and pesticide analysis. GC Chromosorb P NAW Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb P AW Art. Description Qty mesh 100g mesh 100g

80 Stationary Phase and Supports Art. Description Qty mesh 100g Chromosorb P AW-DMCS Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb G NAW Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb G AW Art. Description Qty mesh 100g mesh 100g mesh 100g 78 Chromosorb G AW-DMCS Art. Description Qty mesh 100g mesh 100g mesh 100g GC Chromosorb G HP Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb W AW Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb W AW-DMCS Art. Description Qty mesh 100g mesh 100g mesh 100g Chromosorb W HP Art. Description Qty mesh 100g mesh 100g mesh 100g Bentone 34 For more information about this product, please refer to page 75. Chromosorb 750 Art. Description Qty mesh 100g mesh 100g mesh 100g

81 Stationary Phase and Supports Chromosorb Specifications Chromosorb Series Color Surface Area ( m 2 /g) Packed Density (g/cc) Recommended Liquid Phase Load Chromosorb G Oyster white % Chromosorb P Orange-Pink % Chromosorb W White % Chromosorb 750 Off-white % Chromosorb Treatment Specifications NAW Untreated (non-acid washed) AW Acid washed DMCS Dimethyldichlorosilane (silanized) HP High performance QC ed (acid washed, silanized, flux-calcined) Century Series Chromosorb Century Series Chromosorb Century Series Chromosorb porous polymers have a rigid structure and distinct pore size. They are packed into columns in the normal manner and do not require a liquid coating. Chromosorb 101 For free fatty acids, glycols, alcohols, alkanes, esters, ketones, hydrocarbons, ethers Chromosorb 102 For alcohols, light and permanent gases, oxygenated compounds, or as an adsorbent to trap organics in air or water. Chromosorb 103 For basic compounds such as alcohols, amides, amines, arsines, hydrazines, ketones, NH3, phosphines, or as an adsorbent to trap acidic compounds in air. Chromosorb 105 For formaldehyde, various classes of organic compounds (boiling point approx. 200 C), to separate acetylene from other small hydrocarbons, or as an adsorbent for trapping organics in air or water. Chromosorb 106 For gases, C2-C5 alcohols, low boiling compounds; an adsorbent for organics in air or water. Chromosorb 107 Formaldehyde, sulfur gases, efficient for moderately polar compounds. Adsorbent to trap vinyl acetate from air Chromosorb 108 Gases, alcohols, aldehydes, ketones, glycols,etc. Retention characteristics differ from other Century Series Chromosorb Chromosorb T Sulfur gases, halogens, mercaptans, hydrazines, water No tailing problems with polar compounds. Highly inert surface. 79 GC Copper Tubing For more information about this product, please refer to page 91. Chromosorb 101 Art. Description Qty Max Temp( C) mesh 50g 275/ mesh 50g 275/ mesh 50g 275/325 Chromosorb 102 Art. Description Qty Max Temp( C) mesh 50g 250/ mesh 50g 250/ mesh 50g 250/300

82 Stationary Phase and Supports Chromosorb 103 Art. Description Qty Max Temp( C) mesh 50g 275/ mesh 50g 275/ mesh 50g 275/300 Chromosorb 105 Art. Description Qty Max Temp( C) mesh 50g 250/ mesh 50g 250/ mesh 50g 250/275 Glass Wool For more information about this product, please refer to page 94. Chromosorb 106 Art. Description Qty Max Temp( C) mesh 50g 225/ mesh 50g 225/ mesh 50g 225/250 Chromosorb 107 Art. Description Qty Max Temp( C) mesh 50g 225/ mesh 50g 225/ mesh 50g 225/250 Chromosorb 108 Art. Description Qty Max Temp( C) GC mesh 50g 225/ mesh 50g 225/ mesh 50g 225/250 Chromosorb T Art. Description Qty Max Temp( C) mesh 100g 250/ mesh 100g 250/250 Chromosorb Specifications Chromosorb Series Polymer Composition Polar Surface Area ( m 2 /g) Density (g/cc) Chromosorb 101 DVB/Styrene Non-Polar less than Chromosorb 102 DVB/Styrene Slightly Polar Chromosorb 103 Cross-linked Polystyrene Non-Polar Chromosorb 105 Polyaromatic Mod. Polar Chromosorb 106 Cross-linked Polystyrene Non-Polar Chromosorb 107 Cross-linked Acrylic Ester Polar Chromosorb 108 Cross-linked Acrylic Polar Chromosorb T Tetrafluorethylene TFE Fluorocarbon Non-Polar Porapak Porapak GC packings are cross-linked polymers which can be used directly in GC columns without a stationary phase coating. Acetone washing of Porapak improves performance. Porapak

83 Stationary Phase and Supports Porapak QS Art. Description Qty Max Temp( C) mesh 20g mesh 20g mesh 20g 250 Porapak R Art. Description Qty Max Temp( C) mesh 20g mesh 20g mesh 20g 250 Porapak Q Art. Description Qty Max Temp( C) mesh 26g mesh 26g mesh 26g 250 Porapak QS Art. Description Qty Max Temp( C) mesh 26g mesh 26g mesh 26g 250 Porapak R 81 Art. Description Qty Max Temp( C) mesh 24g mesh 24g mesh 24g 250 GC Porapak S Art. Description Qty Max Temp( C) mesh 26g mesh 26g mesh 26g 250 Porapak N Art. Description Qty Max Temp( C) mesh 28g mesh 28g mesh 28g 190 Porapak T Art. Description Qty Max Temp( C) mesh 31g mesh 31g mesh 31g 190 Porapak Specifications Tubing Cutters For more information about this product, please refer to page 91. Chromosorb Series Polymer Composition Polar Surface Area ( m 2 /g) Density (g/cc) Porapak P DVB /Styrene Non-Polar Porapak PS Silanized version of Porapak P. Non-Polar Porapak Q DVB /Ethylvinylbenzene Slightly nonpolar to moderate Porapak QS Silanized version of Porapak S Slightly nonpolar to moderate

84 Stationary Phase and Supports Chromosorb Series Polymer Composition Polar Surface Area ( m 2 /g) Density (g/cc) Porapak R DVB /Vinyl pyrrolidinone Moderate polar Porapak S DVB /Vinyl pyridine Moderate polar Porapak N DVB /Vinyl pyrrolidinone Polar Porapak T Ethyleneglycoldimethacrylate High polar HayeSep HayeSep polymers are thoroughly cleaned and preconditioned for twelve hours under oxygen-free nitrogen before packing.these handling techniques produce polymers which are consistently the same,with no shrinkage and minimum bleed.columns packed with HayeSep require minimum conditioning. HayeSep A Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc HayeSep HayeSep B Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc 190 GC HayeSep C Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 250 Brass Union For more information about this product, please refer to page 92. HayeSep D Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 290 HayeSep DB Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 290 HayeSep N Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc 250 HayeSep Q Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 275

85 Stationary Phase and Supports HayeSep R Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 250 HayeSep S Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc 250 HayeSep T Back Ferrule For more information about this product, please refer to page 92. Art. Description Qty Max Temp( C) mesh 75cc mesh 75cc mesh 75cc 165 HayeSep Specifications Chromosorb Series Polymer Composition Polar Surface Area ( m 2 /g) Density (g/cc) HayeSep A DVB/EGDM (high purity) HayeSep B DVB /PEI HayeSep C DVB /ACN HayeSep D DVB/ (high purity) HayeSep DB DVB/ (high purity) HayeSep N DVB /EGDM HayeSep P DVB /Styrene HayeSep Q DVB HayeSep R DVB /NV2P HayeSep S DVB /4VP HayeSep T EGDM GC DVB Divinylbenzene ACN Acrylonitrile EGDM Ethyleneglycoldimethacrylate NV2P N-Vinyl-2-pyrrolidinone PEI Polyethyleneimine 4VP 4-Vinyl-pyridine Zeolite Molecular Sieves Molecular Sieve 5A and Molecular Sieve 13X are commonly used for separations of H 2, O 2, N 2, CH4, and CO, argon, neon, and other rare gases. Also used as trapping materials, in particular, for removing water vapor from gas streams. When three-foot columns of the molecular sieves are compared, elution of H 2, O 2, N 2, and CH4, is approximately equal, but elution of CO takes twice as long on Molecular Sieve 5A. Molecular Sieve 4A Art. Description Qty Max Temp( C) mesh 50g mesh 50g mesh 50g mesh 50g 400 Molecular Sieve 5A Art. Description Qty Max Temp( C) mesh 50g mesh 50g mesh 50g mesh 50g

86 Stationary Phase and Supports Molecular Sieve 13X Art. Description Qty Max Temp( C) mesh 50g mesh 50g mesh 50g mesh 50g 400 Tenax Tenax -TA is a porous polymer that is based on 2,6-Diphenylp- phenylene Oxide. It has replaced Tenax -GC. Tenax TA can be used as a packing and as a trapping material. Both the EPA and NIOSH specify the use of Tenax in their standard methods. Tenax is particularly useful for the analysis of high boiling compounds such as alcohols, polyethylene glycols, diols, phenols, monoamines and diamines, ethanolamines, aldehydes, ketones, and chlorinated aromatics. Tenax -GR contains 30% graphitized carbon as an integral part of the material. This is not an admixture; the graphitized carbon is co-precipitated with the Tenax polymer. The resulting material gives higher breakthrough volumes for most materials, yet is less water retentive than Tenax -TA. When using this material for packing GC columns, better peak symmetry is observed. Surface area is 24.1m 2 /g. 84 GC Tenax TA Tenax TA Art. Description Qty Max Temp( C) Tenax TA 20/35 10g Tenax TA 35/60 10g Tenax TA 60/80 10g Tenax TA 60/80 50g Tenax TA 80/100 10g 350 Tenax GR Art. Description Qty Max Temp( C) Tenax GR 20/35 10g Tenax GR 35/60 10g Tenax GR 60/80 10g Tenax GR 80/100 10g 350 Tenax TA Graphitized Carbon Blacks (GCB) Nonporous, nonspecific, highly inert graphitic carbon adsorbents/solid supports which separate compounds according to the size and shape of the molecule (e.g., polarizability). Addition of a liquid phase allows unique separations, based on analyte interactions with both the carbon surface and the liquid phase (i.e., gas-liquid-solid chromatography, or GLSC) Carboteck B - USP code [S12]. Surface area: ~100m²/g. Carboteck C - USP code [S7]. Surface area: ~ 10m²/g. Separation mechanism equivalent to that of Carboteck B, but a larger molecular size range typically is chosen. Carboteck F - Surface area: ~ 5m²/g. Can reduce separation times by 50%, compared to Carboteck C. Carboteck X - A unique graphitized carbon black with porosity (absent in most GCBs). The 240m2/g surface area provides greater adsorption strength, relative to other GCBs, making Carboteck X a unique bridge between GCBs and carbon molecular sieves. Density: 0.41g/mL. Carbotecp B - Surface area: 100m2/g; available in 20/40 mesh. Traps many airborne

87 Stationary Phase and Supports C4-C8 compounds. Carbotecp C - Surface area: 10m2/g; available in 20/40 mesh. Traps many airborne C8 and heavier compounds. Carboteck Art. Description Qty Max Temp( C) Carboteck B mesh 10g > Carboteck BHT mesh 10g Carboteck B mesh 10g > Carboteck B mesh 10g > Carboteck C mesh 10g > Carboteck C mesh 10g > Carboteck F mesh 10g > Carboteck X mesh 10g >500 Carbotecp Art. Description Qty Max Temp( C) Carbotecp B mesh 10g Carbotecp B mesh 10g Carbotecp C mesh 10g Carbotecp C mesh 10g Carbotecp F mesh 10g Carbotecp F mesh 10g Carbotecp X mesh 10g Carbotecp X mesh 10g Packings Art. Description Qty Max Temp( C) /80 Carboteck B/1% SP g /120 Carboteck B DA 4% Carbowax 20M 15g /120 Carboteck B AW/6.6% Carbowax 20M 15g /120 Carboteck B AW/5% Carbowax 20M 15g /80 Carboteck B/4% Carbowax 20M + 0.8% KOH 15g /100 Carboteck C/0.1% SP g /80 Carboteck C/0.2% Carbowax g /100 Carboteck C/0.2% Carbowax g 175 GC

88 GC Accessories 86 Septa GC Accessories Septa Our green septa is made from premium 100% silicone rubber with a guide hole that helps guide the syringe needle to the same point with every injection. All of the septa are conditioned for low bleed. Ultra Low Bleed Suitable to an injector port temp of 350 C True long life, high temp performance 50 durometer hardness Art. Diam.(mm) Pkg Max Temp( C) P Shimadzu plug GC 11mm Septa and Shimadzu Plug Ferrule Ferrules All ferrules are thermally conditioned and ready for immediate high temperature GC use. Graphite Ferrules These 99.95% pure graphite ferrules can be used at temperatures up to 450 C without producing bleed or decomposition products. The one-piece design requires no back ferrules. Graphite ferrules are very soft and conform well to the column on compression. These ferrules can be reused as long as care is taken not to overtighten them. Vespel Ferrules Vespel ferrules do not cold flow, are easily reusable, and withstand temperature up to 350 C. At high temperatures, Vespel may adhere to glass or metal. Vespel /Graphite Ferrules Composites of Vespel and graphite combine the advantages of the two materials. They are less likely to adhere to the column than Vespel but are more durable than graphite. Ferrules are easy to reuse and stable at temperatures to 400 C. PTFE Ferrules PTFE ferrules are completely inert and an economical choice. They have an upper temperature limit of 250 C. PTFE ferrules conform well to the shape of the column upon compression and can be reused if handled carefully. Ferrule Type 0.4mm Hole: 0.5mm Hole: 0.8mm Hole: NO-HOLE: 2-HOLE: Use for Capillaries with i.d. of mm Capillaries with i.d. of mm Capillaries with i.d. of mm As plugs, or drill for special needs Connecting two pieces of capillary tubing or columns to the same endfitting Short Ferrule

89 GC Accessories Maximum Operating Temperature 100% Graphite 450 C 85% Vespel / 15% Graphite 400 C 60% Vespel / 40% Graphite 400 C 100% Vespel 350 C 100% Teflon 250 C Short Ferrule for Agilent Capillary Column 100% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / % Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / % Vespel / 40% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / GC 100% Vespel Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / % PTFE Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / Long Ferrule Long Ferrule for Agilent,PerkinElmer and Varian 100% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / /

90 GC Accessories Art. Fitting Size(in.) Tubing Size(mm) Pkg / / % Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / % Vespel / 40% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / % Vespel 88 Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / GC 100% PTFE Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / / Packed GC Ferrule 100% Graphite Art. Fitting Size(in.) Tubing Size(in.) Pkg /16 1/ /8 1/ /16 3/ /4 1/ /8 3/ /2 1/ % Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size(in.) Pkg /16 1/ /8 1/ /4 1/ % Vespel / 40% Graphite Art. Fitting Size(in.) Tubing Size(in.) Pkg /16 1/ /8 1/8 10

91 GC Accessories Art. Fitting Size(in.) Tubing Size(in.) Pkg /4 1/ % Vespel Art. Fitting Size(in.) Tubing Size(in.) Pkg /16 1/ /8 1/ /4 1/ % PTFE Art. Fitting Size(in.) Tubing Size(in.) Pkg /16 1/ /8 1/ /16 3/ /4 1/ /8 3/ /2 1/2 Reducing Ferrule 100% Graphite Art. Fitting Size(in.) Tubing Size Pkg /8 0.4mm /8 0.5mm /8 0.8mm /8 1.0mm /8 1/16 inch /4 1/16 inch /4 1/16 inch GC 85% Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size Pkg /8 0.4mm /8 0.5mm /8 0.8mm /8 1.0mm /8 1/16 inch /4 1/16 inch /4 1/16 inch % Vespel Art. Fitting Size(in.) Tubing Size Pkg /8 0.4mm /8 0.5mm /8 0.8mm /8 1.0mm /8 1/16 inch /4 1/16 inch /4 1/16 inch % PTFE Art. Fitting Size(in.) Tubing Size Pkg /8 0.4mm /8 0.5mm /8 0.8mm /8 1.0mm /8 1/16 inch 10

92 GC Accessories Art. Fitting Size(in.) Tubing Size Pkg /4 1/16 inch /4 1/16 inch 10 Two-Hole Ferrule 100% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / % Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / % Graphite 90 Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / GC 100% PTFE Art. Fitting Size(in.) Tubing Size(mm) Pkg / / / / No-Hole Ferrule 100% Graphite Art. Fitting Size(in.) Tubing Size Pkg / / / % Vespel / 15% Graphite Art. Fitting Size(in.) Tubing Size Pkg / / / % Graphite Art. Fitting Size(in.) Tubing Size Pkg / / / % PTFE Art. Fitting Size(in.) Tubing Size Pkg /16-10

93 GC Accessories Art. Fitting Size(in.) Tubing Size Pkg / /4-10 Tubing Inner surface treated and cleaned excellent for GC use. Copper Tubing Meets ASTM B-280 Art. O.D.(in.) I.D.(in.) Length(ft) / / / Stainless Steel Tubing and are Type 316 stainless is Type 304 stainless. Art. O.D.(in.) I.D.(in.) Length(ft) / / / Nickel 200 tubing Inner surfaces treated and cleaned excellent for GC use Art. O.D.(in.) I.D.(in.) Length(ft) / / GC Aluminum tubing Art. O.D.(in.) I.D.(in.) Length(ft) / / PTFE tubing Max Temp( C) 260 Art. O.D.(in.) I.D.(in.) Length(ft) / / FEP tubing Max Temp( C) 200 Art. O.D.(in.) I.D.(in.) Length(ft) / Tubing Cutters Tubing Cutters Art. Description Pkg MINI TUBE CUTTERS, For 1/8" to 5/8" tubing Cutting wheel for

94 GC Accessories Art. Description Pkg Heavy Duty Tuing Cutter, For 1/8" to 5/8" tubing Cutting wheel for TUBE CUTTERS, For 1/16" tubing Cutting wheel for Swagelok Tubing Fittings 92 GC Brass Nut Front and Back Ferrule Brass Union Brass Reducing Union Nut Art. Description Pkg Brass 1.00B For 1/16 in. Swagelok Tube Fitting B For 1/8 in. Swagelok Tube Fitting B For 1/4 in. Swagelok Tube Fitting 10 Stainless steel 1.00S For 1/16 in. Swagelok Tube Fitting S For 1/8 in. Swagelok Tube Fitting S For 1/4 in. Swagelok Tube Fitting 10 Front Ferrule Art. Description Pkg Brass 1.00B For 1/16 in. Swagelok Tube Fitting B For 1/8 in. Swagelok Tube Fitting B For 1/4 in. Swagelok Tube Fitting 10 Stainless steel 1.00S For 1/16 in. Swagelok Tube Fitting S For 1/8 in. Swagelok Tube Fitting S For 1/4 in. Swagelok Tube Fitting 10 Back Ferrule Art. Description Pkg Brass 1.00B For 1/16 in. Swagelok Tube Fitting B For 1/8 in. Swagelok Tube Fitting B For 1/4 in. Swagelok Tube Fitting 10 Stainless steel 1.00S For 1/16 in. Swagelok Tube Fitting S For 1/8 in. Swagelok Tube Fitting S For 1/4 in. Swagelok Tube Fitting 10 Union Art. Description Pkg Brass 1.0B For 1/16 in. Swagelok Tube Fitting 2 1.0B For 1/8 in. Swagelok Tube Fitting 2 1.0B For 1/4 in. Swagelok Tube Fitting 2 Stainless steel 1.0S For 1/16 in. Swagelok Tube Fitting 2 1.0S For 1/8 in. Swagelok Tube Fitting 2 1.0S For 1/4 in. Swagelok Tube Fitting 2 Reducing Union Art. Description Pkg Brass 1.B For 1/8 in. x 1/16 in. Tube OD 2

95 GC Accessories Brass Plug Art. Description Pkg 1.B For 3/16 in. x 1/8 in. Tube OD 2 1.B For 1/4 in. x 1/16 in. Tube OD 2 1.B For 1/4 in. x 1/8 in. Tube OD 2 1.B For 1/2 in. x 1/8 in. Tube OD 2 1.B For 1/2 in. x 1/4 in. Tube OD 2 Stainless steel 1.S For 1/8 in. x 1/16 in. Tube OD 2 1.S For 3/16 in. x 1/8 in. Tube OD 2 1.S For 1/4 in. x 1/16 in. Tube OD 2 1.S For 1/4 in. x 1/8 in. Tube OD 2 1.S For 1/2 in. x 1/8 in. Tube OD 2 1.S For 1/2 in. x 1/4 in. Tube OD 2 Plug Art. Description Pkg Brass 1.0B100P.0003 For 1/16 in. Tube OD 3 1.0B200P.0003 For 1/8 in. Tube OD 3 1.0B400P.0003 For 1/4 in. Tube OD 3 1.0B810P.0003 For 1/2 in. Tube OD 3 Stainless steel 1.0S100P.0003 For 1/16 in. Tube OD 3 1.0S200P.0003 For 1/8 in. Tube OD 3 1.0S400P.0003 For 1/4 in. Tube OD 3 1.0S810P.0003 For 1/2 in. Tube OD 3 93 Brass Cap Caps Art. Description Pkg Brass 1.0B100C.0006 For 1/16 in. Tube OD 6 1.0B200C.0006 For 1/8 in. Tube OD 6 1.0B300C.0006 For 1/4 in. Tube OD 6 Stainless steel 1.0S100C.0006 For 1/16 in. Tube OD 6 1.0S200C.0006 For 1/8 in. Tube OD 6 1.0S300C.0006 For 1/4 in. Tube OD 6 GC Tee and Cross Union Tee Art. Description Pkg Brass 1.0B For 1/16 in. Tube OD 2 1.0B For 1/8 in. Tube OD 2 1.0B For 1/4 in. Tube OD 2 Stainless steel 1.0S For 1/16 in. Tube OD 2 1.0S For 1/8 in. Tube OD 2 1.0S For 1/4 in. Tube OD 2 Union Cross Art. Description Pkg Brass 1.0B For 1/8 in. Tube OD 1 1.0B For 1/4 in. Tube OD 1 Stainless steel 1.0S For 1/8 in. Tube OD 1 1.0S For 1/4 in. Tube OD 1 Snoop Liquid Leak Detector

96 GC Accessories Art. Description Pkg 1.MS08OZ.0001 Snoop Liquid Leak Detector. 8 oz. (236mL) Bottle 1 Glass Wool and Quartz Wool Snoop We offer four different kinds of glass and quartz wool, for nearly all chromatographic needs. These are specially recommended for use in injection liners, and end plugs in packed columns. Untreated Silane Treated silanized treated for general use Phosphoric Acid Treated - recommended for analysis of acidic compounds such as free acids, phenols and glycols. Pesticide Grade. 94 GC Glass Wool Glass Wool Art. Description Pty Max Temp( C) Untreated 50g DMCS Treated 50g Phosphoric acid Treated 50g Pestcide grade Treated 50g 400 Quartz Wool Art. Description Pty Max Temp( C) Untreated 10g g DMCS Treated 5g Phosphoric acid Treated 5g 250 Glass Wool and Quartz Wool Fused Silica Connectors Excellent for repairing broken columns, or for connecting guard columns Art. Description Pkg Universal Union Universal Union Universal Union Universal Union, deactived Universal Union, deactived Universal Union, deactived Y connector Y connector Y connector, deactived Y connector, deactived Polyimide Sealing Resin 5g Universal and Y Connectors

97 GC Applications GC Applications Residual Solvents Fatty acids (C1-C14) 1.Methanol 2.Ethanol 3.Ethyl ether 4.Acetone 5.2-Propanol 6.Acetonitrile 7.Dichlormethan 8.t-Butanol 9.n-Hexane 10.1-Propanol 11. Butanon 12.Ethyl acetate 13.Tetrahydrofuran 14.Chloroform 15.Cyclohexane 16.Benzene 17.n-Heptan 18.Trichlorothene 19.1,4-Dioxan 20. Pydine 21.Toluene 22.N,N-Dimethylformamide 1.Acetone 2.formic acid 3.Acetic acid 4.Propionic acid 5.Isobutyric acid 6.Butyric acid 7.Isovaleric acid 8.Valeric Acid 1, Methylvaleric acid 10.Hexanoic acid 11.Heptanoic acid 12.Octanoic acid 13.Decanoic acid 14.Lauric acid 15.Tetradecanoic acid Min Column: CD-ACIDWAX (P/N: ) 30m x0.25mm x 0.25um 95 Temp.: 150 C (4min), 10 C/min to 230 C(10 min) Carrier gas: He, at 40cm/se Injection: 240 C,split 1:50 Det.: 250 C,FID GC , Aromatics Benzene 2.Toluene 3.Ethylbenzene 4.p-Xylene 5.m-Xylene 6.o-Xylene Min 2 3 Column: CD-624 (P/N: ) 30m x0.53mm x 3.00um Temp.: 35 C (10min), 10 C/min to 150 C(5 min) Carrier gas: He Injection: 240 C,split 1:30 Det.: 260 C,FID Min Column: CD-WAX (P/N: ) 30m x0.25mm x 0.25um Temp.: 80 C Carrier gas: He Injection: 240 C Det.: 300 C,FID

98 GC Applications Organophosphorus Pesticides C1-C5 Hydrocarbons 1.Dichlorvos 2.Methamidophos 3.acephate 4.Phorate 5.Omethoate 6.Chlorpyriphos-methyl 7.Dimethoate 8.Chlorpyrifos 9.Malathion 10.Fenitrothion 11.Parathion 12.Quinalphos 5 1.Methane 2.Ethylene 3.Acetylene 4.Ethane 5.Propylene 6.Propane 7.Cyclopropane 8.Propadiene 9.Propyne 10.iso-Butene 11.1,3-Butadiene 12.n-Butene 13.n-Butane 14.trans-2-butene 15.Iso-pentane 16.n-pentane ,3 5 8, Min 5 10 Min GC Column: CD-1701 (P/N: ) 30m x0.25mm x 0.25um Temp.: 40 C (5min), 10 C/min to 280 C,hold Carrier gas: He Injection: 250 C Det.: FPD,280 C Column: CD-PLOT Q (P/N: ) 30m x 0.53mm x 20um Temp.: 40 C (5min), 5 C/min to 200 C Carrier gas: He Injection: 240 C Det.: 260 C,FID

99 Syringes Hamilton Syringes...98 Introduction...98 Point styles...98 Syringe terminations Series Syringes Series Syringes Series Syringes Series Syringes Series Syringes Series Syringes Needles Removable Needles Metal (N) Hub Needles Kel-F (KF) Hub Needles...104

100 Hamilton Syringe Hamilton Syringes Introduction For more than 50 years, HAMILTON has been satisfying customer needs in the field of precision fluid measuring. It all started with syringes. Not commercial, mass-produced medical syringes, but precision measuring instruments. With proper care and handling, HAMILTON syringes will provide unsurpassed performance in precision fluid handling year after year. Point styles 98 Syringe Point styles Syringe terminations pst2 This is the standard point style suitable for all chromatographic applications bevelled, non-coring needle point, recommended for septum penetration. (Only needle gauges from 22 to 26s are ideal for septum penetration.) pst3 This needle has a 90 bevel and is mainly used in HPLC injection valves. It is recommended for sample pipetting and where precision dosing is required (e.g. thin layer chromatography). pst4 This needle is cut at an angle of and has a sharp point for animal injections. pst5 Conical needle with closed end and a side hole. The closed end prevents the needle from being plugged when septa are penetrated (coring). Pst5 needles are available from gauges 10 to 26s. Ideal for penetration of septa, thin-gauged vinyls and plastic without coring. pstas The needles have an 8 cone. They have been designed to penetrate GC Autosampler septa. AS standard needles are available in gauges 26, 26s, 23, 23s, 22, 22s. Other dimensions on request. Syringe terminations N, Cemented Needle Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark; not autoclavable. LTN, Luer Tip Cemented Needle Needles are cemented into the glass syringe barrel at a point corresponding to the zero graduation mark; not autoclavable. RN, Removable Needle Removable needles seat precisely to the zero graduation mark of the syringe; autoclavable when disassembled. Allows the use of different specification needles on the same syringe barrel. LT, Luer Tip Ground glass syringe barrel with a male luer taper accepts most hypodermic needles; autoclavable when disassembled. Use Kel-F hub needles and connectors for a tight seal.

101 Hamilton Syringe TLL, TEFLON Luer Lock (with or without slots) Male luer taper with nickel-plated brass hub accepts, and locks in place, luer hub needles and connectors; autoclavable when disassembled. Used with Hamilton diluters/ dispensers, in OEM applications and in manual operations. KH, Knurled Hub Removable needle, knurled hub is used on 7000 Series syringes, exclusively; autoclavable when disassembled. Knurled hub enables 6000 psig maximum injection pressures and the attachment of a spacer for repeatable depth injections. SL, SampleLock On/Off syringe valve with RN needle is cemented to a syringe barrel; not autoclavable. Used for headspace, environmental sample collection and storage, pre-pressurization of gaseous samples for GC analysis, and sample spiking. 700 Series Syringes The 700 series MICROLITER syringes are the original HAMILTON syringes and are the standard liquid measuring devices throughout the world for precise delivery of liquids in the from 5 μl to 500 μl volume range. Steel plungers individually fitted into the borosilicate glass barrels guarantee the highest level of quality. The accuracy of these syringes is ± 1% of the nominal volume Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul N 26S/2 / ul N 26S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22/2 / ul N 26S/2 / ul N 26S/2 / ul N 22s/2"/ ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22/2 / ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul RN 26S/2 / ul RN 26S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22/2 / ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included 99 Syringe

102 Hamilton Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul RN Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included 800 Series Syringes The 800 series MICROLITERTM syringes are a further development of the 700 series syringes and are liquid tight.the plungers are equipped with a removable metal handle which prevents heat transfer and the fine plunger frombending. The handle is assembled with a special stop that prevents the plunger from blowing out. If the glass barrel becomes damaged, the barrel can be easily replaced in the lab. The accuracy of these syringes is ± 1% of the nominal volume. 100 Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul N 26S/2 / ul N 26S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul RN 26S/2 / ul RN 26S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included ul RN Needle not included 7000 Series Syringes HAMILTON 7000 series syringes are designed on the dead volume free principle of positive displacement. A fine tungsten plunger extends through the whole length of the syringe to the needle end. These syringes are available in capacities from 0.5 μl up to 5 μl. The accuracy is ± 1% of the nominal volume. The needle and tungsten plunger are exactly fitted and can be replaced as an assembly. Since the needle length and inner diameter determine the nominal volume when ordering special needles (SN) only the length and point style can be defined. Point style 5 needles are not available Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul KH 32/2.75 / ul KH 25/2.75 / ul KH 25/2.75 / ul KH 25S/2.75 / ul KH 25S/2.75 / ul KH 22S/2.75 / ul KH 22S/2.75 / ul KH 25/2.75 /2

103 Hamilton Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul KH 25/2.75 / ul KH 23/2.75 / ul KH 23/2.75 / ul KH 24/2.75 / ul KH 24/2.75 / ul RN 22S/2 / ul RN Needle not included ul RN 22S/2 / ul RN Needle not included 1700 Series Syringes The HAMILTON 1700 series is the GASTIGHT version of the 700 series. The syringes are designed to work with liquids and gases. These syringes use PTFE as an inert plunger seal. They cover capacities from 10 μl to 500 μl. The syringes have an accuracy of ± 1% of the nominal volume. With these syringes liquids only come into contact with glass and PTFE. The plunger assemblies are interchangeable Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LT Needle not included ul LTN 22/2 / ul LTSN Needle not included ul N 26S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul SN Needle not included ul N 26S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul RN 26S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22/2 / ul RN 26S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22/2 / ul RN Needle not included ul RN Needle not included ul RN Needle not included 101 Syringe

104 Hamilton Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul RN Needle not included ul RN Needle not included ul RN Needle not included ul SampleLock 22S/2 / ul SampleLock 22S/2 / ul SampleLock 22S/2 / ul SampleLock 22/2 / ul TLL w/o slots Needle not included ul TLL w/o slots Needle not included ul TLL w/o slots Needle not included ul TLL w/o slots Needle not included ul TLL w/o slots Needle not included ul TLL with slots Needle not included ul TLL with slots Needle not included ul TLL with slots Needle not included ul TLL with slots Needle not included 1800 Series Syringes HAMILTON 1800 series syringes are gas and liquid tight and equivalent in design to the 800 series. As a further development of the 800/1700 series they combine interchangeability of individual parts (glass barrel, plunger, reusable handle) with easy handling (adjustable plunger, drag and blow out stop). These syringes are available in capacities from 10 μl to 250 μl. The accuracy is the same as other HAMILTON syringes ± 1%. 102 Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ul N 26S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul N 22S/2 / ul RN 26S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN 22S/2 / ul RN Needle not icluded ul RN Needle not icluded ul RN Needle not icluded ul RN Needle not icluded ul RN Needle not icluded 1000 Series Syringes The HAMILTON 1000 series syringes are gas and liquid tight and are available in volumes from 1 ml to 100 ml. The barrel is precision-manufactured from borosilicate glass. The plunger is made of PTFE coated aluminium and equipped with a precision PTFE seal. The flexibility of the seal allows the interchange of glass barrel and plunger between syringes of the same capacity. All parts in contact with the samples are made of inert materials such as glass and PTFE. These GASTIGHT syringes have an accuracy of ± 1% of the nominal volume. Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ml LT Needle not included

105 Hamilton Syringe Art. Volume SyringeTerminations Neddle(Ga/Length/Pst) ml LTN 22/2 / ml LTN 22/2 / ml LTN 22/2 / ml LTSN Needle not included ml RN 22/2 / ml RN 22/2 / ml RN Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL w/o slots Needle not included ml LT Needle not included ml LTN 22/2 / ml LT Needle not included ml LTN 22/2 / ml LTN 22/2 / ml LTN 22/2 / ml LTSN Needle not included ml RN 22/2 / ml RN Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL with slots Needle not included ml LT Needle not included ml LTN 22/2 / ml LTN 22/2 / ml LTN 22/2 / ml LTSN Needle not included ml RN 22/2 / ml RN Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL with slots Needle not included ml LT Needle not included ml LTN 22/2 / ml LTSN Needle not included ml RN 22/2 / ml RN Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL with slots Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL with slots Needle not included ml TLL w/out flange Needle not included ml TLL w/out flange Needle not included ml SampleLock 22/2 / ml TLL w/o slots Needle not included ml TLL with slots Needle not included ml TLL w/out flange Needle not included ml TLL w/out flange Needle not included ml SampleLock Needle not included ml TLL w/o slots Needle not included 103 Syringe

106 Hamilton Syringe Needles Removable Needles RN needles are made of stainless steel. The needles are available for syringes in volumes from 5 μl to 100 μl and from 250 μl up to 10 ml syringes. RN needles are available in a range from gauge 19 to gauge 34. All standard RN needles are delivered in 51 mm needle length. The RN ferrule is contained in the RN pack. RN needles are sold in packages of six pieces. From HAMILTON you can order your custom made needle according to your specification (SN). Art. Gauge Pst Pkg S S S S S S Metal (N) Hub Needles 104 The N needles (metal hub) are available in a convenient six pack. The needles are available with a wide variety of point style. Standard needles are delivered with a needle length of 51 mm. Custom made needles are available up to a length of max 1000 mm. The metal hub is made of brass and nickel plated. The needle material quality is SST 304 (DIN1.4301). SST tubing without hub can also be ordered Syringe Metal (N) Hub Needles Art. Gauge Pst Pkg S S S S S S Kel-F (KF) Hub Needles The KF needles (Kel-F hub) are available in a convenient six pack. The needles are available with a wide variety of point style. Standard needles are delivered with a needle length of 51 mm. Custom made needles are available up to a length of max 1000 mm. The needle material quality is SST 304 (DIN1.4301). Kel-F (KF) Hub Needles

107 Hamilton Syringe Art. Gauge Pst Pkg S S S S S S Syringe

108 Sample Vials What to Consider When Selecting an Autosampler Vial? Septa Selection Guide Autosampler Vials Screw Thread Neck Vials mm Screw Thread Neck Vials Screw Thread Neck Vials mm Crimp Neck Vials mm Snap Neck Vials Screw Thread Neck Vials Limited Volume Inserts Shell Vials Storage Vials and EPA Vials Sample Storage Vials EPA Vials Headspace Vials mm Precision Thread Neck Headspace vials mm Crimp Neck Headspace Vials Crimpers & Decrimpers Sampling Bottles Straight Sided Jar Wide Mouth Jar...125

109 Selection Guide A VIAL IS A VIAL, OR IS IT? Autosampler vials may seem insignificant when compared to the sophisticated analytical instrumentation most laboratories use, but the incorrect vial, cap or septa can contribute to problems that can decrease productivity and reproducibility. Potential Problems Caused by Using Incorrect Vial/Cap/Septum: Loss of analyte due to evaporation Presence of extra peaks in the chromatogram due to solvent/septum interaction Mechanical damage to autosampler Sample degradation Irreproducible injection volumes What to Consider When Selecting an Autosampler Vial? Autosampler Compatibility Not all autosamplers are alike. Some utilize robotic arms to pick up a sample vial; some use tray rotation while others move the sampling needle to the respective vial coordinates. The dimensions of autosampler vials vary. Most autosamplers are equipped with trays that use 12x32mm vial configurations but some like the Waters Wisp require a 15x45mm configuration. Consult your autosampler s operating manual or manufacturer to determine the vial dimensions required. Sample Volume The amount of sample available for analysis is important in choosing the appropriate vial. If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full. The dimensions for 12x32mm vials are standard between manufacturers but the length of the neck and width/shape of the vial shoulder may vary. 12x32mm microvials have the same outer dimensions but the inside of the vial may be tapered to reduce volume or contain a fused insert. 12x32mm high recovery vials will have an internal conical bottom that allows for maximum sample recovery. 107 Sample Compatibility The analyte and solvent compatibility should be considered in choosing vials and accessories. For example, amber glass is most often used for light sensitive samples while deactivated glass or plastic vials are used for compounds that are sensitive to glass or stick to the glass itself. Volatile samples require closures that reduce the risk of analyte loss due to evaporation. Linear Coefficient of Expansion refers to the fractional change in the length of glass per degree of change in temperature, in short, the ability of the glass to tolerate rapid thermal changes. The lower the coefficient of expansion the better the glass can handle temperature change without fracturing. Classifications for laboratory glass based on its resistance to attack from water were established by the United States Pharmacopoeia, USP. USP Type 1, Class A, 33 Borosilicate Glass is the most inert and chemically resistant glass widely used in laboratories especially for chromatography applications. Type I glass is composed primarily of silicone and oxygen, with trace amounts of boron and sodium. It has the lowest leaching characteristics and a linear coefficient of expansion of 33. USP Type 1, Class B, 51 Borosilicate Glass which is composed of silicone and oxygen, trace amounts of boron, sodium and other element is more alkaline than Class A glass but still adequate for laboratory use. All amber borosilicate glass is made of Class B unless otherwise specified and has an expansion coefficient of 51. Silanized or deactivated glass is borosilicate glass that has undergone further deactivation by treating the surface of the glass with an organosilane. The surface Sample Vials

110 Selection Guide becomes more hydrophobic and inert making the vial suitable for use with ph sensitive compounds, trace analyses and applications requiring long term sample storage. USP Types II, III and NP glass are manufactured from soda lime which has less chemical resistance than borosilicate. Polypropylene is a rigid and translucent material, which also comes in a variety of colours and has good chemical resistance for short term storage of most common laboratory chemicals. Resistance decreases over time when using aromatic and halogenated hydrocarbons. Polypropylene vials are often used for ion chromatography because of the extremely low metal content and excellent cleanability with dilute acid followed by deionized water rinse. Polypropylene vials limit the exposure to hazardous materials since they can be incinerated while sealed. Polymethylpentene (TPX) is a rigid transparent material, which has a relatively high melting point with a temperature range of C. TPX vials can be used as alternative to opaque polypropylene vials because they provide maximum clarity. Their chemical resistance is similar to that of polypropylene vials. TPX vials should be used for applications where visual clarity is required or repetitive exposure to higher temperatures such as autoclaving. TPX vials tend to be more brittle at room temperature. 108 Sample Vials Type of Vial Finish and Closures Autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling. Screw thread vials and caps provide low evaporation, reusability, less hand injury during manipulation than crimp seals and require no special tools. All screw threads vials and caps are differentiated by their thread finish as defined by the Glass Packaging Institute, GPI. For screw thread vials, a two part number is assigned. For example, neck finish represents a vial with a diameter of 8 mm across the outside of the threads and a thread style of 425. Screw thread vials and caps are more expensive than crimp seals. Caps for screw thread vials are available with either an open hole for autosampler use and standard addition or with a solid top for sample storage. One piece polypropylene cap and membrane are also available. These pierceable screw thread caps are designed for one time use and reduce sample preparation time as there is no cap and seal to assemble. Crimp top vials require lacquered aluminum crimp seals which are relatively inexpensive and, when properly assembled, provide the best seal for long term storage. Crimp seals are not reusuable. A crimping tool is required to seal caps and a decrimper or decapper is required to remove the seals. Several types of hand crimpers are available including the adjustable precision crimpers that Chromatographic Specialties offers. Adjustable hand crimpers feature an adjustable stop on the handle to provide consistent seal tightness every time. Adjusting the hex screw inside the steel crimper jaws will also alter the amount of crimp. Achieving a good crimp is crucial because overcrimping can cause septum coring, bent needles and create a larger hole in the Teflon septum layer than a properly crimped seal. Undercrimping can result in loose seals and sample evaporation. Snap seal vials are less prone to breakage during decapping because more glass is used in the neck of the vial. The snap seal neck finish is compatible with either crimp and/or snap seals and no special tools are required to remove the cap. These vials are recommended for short term sample storage and non-volatile samples because the seal is not as secure as a crimp or screw thread seal. Shell vials are an economical alternative to screw thread vials for Waters' HPLC autosamplers or any other autosampler that doesn t use a robotic arm to move the vials. Most shell vials are sold with a polyethylene cap that has a starburst design for easy needle penetration.

111 Selection Guide Septa Selection Guide Optimise performance and results by choosing the right septum for your application: PTFE: Exceptional solvent resistance Only suitable for single injection use not recommended for sample storage before or after injection Not resealable The most economical septa Maximum service temperature 260 C PTFE/Silicone: Excellent resealing capabilities highly recommended for multiple injections and sample storage Autoclavable and excellent resistance to coring PTFE chemical resistance until pierced then the septa will have the compatibility of silicone Temperature range -40 C to 200 C Pre-slit PTFE/Silicone: Reduces the possibility of coring with blunt tipped needles or for applications using a thin gauge needle Used to prevent vacuum from forming inside the vial Temperature range -40 C to 200 C PTFE/Silicone/PTFE: Recommended for multiple injections due to above average resealing capabilities Autoclavable and excellent resistance to coring Recommended for demanding applications such as internal standards, trace analysis or applications where there will be a long time between injections Temperature range -40 C to 200 C PTFE/Red Rubber: The most economical septa used in routine analysis Easy to pierce with moderate resealability PTFE chemical resistance until pierced then the septa will have the compatibility of rubber Not recommended when retaining samples for further analysis or for multiple injections Temperature range -40 C to 110 C 109 Sample Vials Moulded Polypropylene: Only suitable for single injection use not recommended for sample storage before or after injection Not resealable Temperature range 0 C to 130 C

112 Autosampler Vials Autosampler Vials Screw Thread Neck Vials Why Choose Screw Cap Vials? screw thread vials are the original smaller opening autosampler vials. They are designed to work in a variety of autosamplers requiring narrow neck vials Screw Thread Vials Art. Description Pkg E E EA Thread screw neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO Thread screw neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO 100pcs. per PP box 100pcs. per PP box Z Thread screw neck vial, 32x11.6mm, clear glass, Silanized 100pcs. per PP box Z0A Thread screw neck vial, 32x11.6mm, amber glass, Silanized 100pcs. per PP box Thread screw neck Micro vial, 1.1ml, 32x11.6mm, clear glass, conical bottom 100pcs. per PP box 3.T Thread screw neck Micro vial, 0.1ml, 32x11.6mm,transparent TPX Screw Caps Art. Description Pkg Screw thread cap, made from PP, black, centre hole 3.W Screw thread cap, made from PP, white, centre hole Screw thread cap, made from PP, black, closed 3.W Screw thread cap, made from PP, white, closed 110 Sample Vials Preassembled Caps Art. Description Pkg CS Septa for Screw Caps Preassembled cap and septa for thread screw, PP cap, black, centre hole, Red rubber/white PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White silicone/red PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, Red PTFE/White Silicone/Red PTFE, 0.040" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White Silicone/Red PTFE, 0.075" thick, slitted Preassembled cap and septa for thread screw, PP cap, black, closed, F217 line Preassembled cap and septa for thread screw, PP cap, black, closed, White silicone/red PTFE Art. Description Pkg Septa for screw thread cap, white PTFE only, 0.010" thick Septa for screw thread cap, White PTFE/red Rubber, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, 0.075" thick Septa for screw thread cap, White silicone/red PTFE, slitted, 0.075" thick

113 Autosampler Vials 9mm Screw Thread Neck Vials Why Choose 9mm Screw Cap Vials? 9mm screw thread vials and the closure is dimensionally equivalent to 11mm crimp cap vials. This means that they can be used in any autosampler that uses 11mm crimp cap vials. 9mm screw caps have an advantage over 11mm crimp caps because 9mm screw caps can easily be applied and removed by hand and they can be reused. 9mm Screw Thread Vials Art. Description Pkg E EA E EA Z ZE Z0A ZEA EA V V0A U00 3.P P P P A 9mm Screw Caps 9mm Thread screw neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO 9mm Thread screw neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO 9mm Thread screw neck vial, 32x11.6mm, clear glass, Silanized 9mm Thread screw neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO, Silanized 9mm Thread screw neck vial, 32x11.6mm, amber glass, Silanized 9mm Thread screw neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO, Silanized 9mm Thread screw neck vial, 1.5mL, 32x11.6mm, clear glass, high recovery 9mm Thread screw neck vial, 1.5mL, 32x11.6mm, clear glass, high recovery, 9mm Thread screw neck vial, 1.5mL, V-Vial, 32x11.6mm, clear glass 9mm Thread screw neck vial, 1.5mL, V-Vial, 32x11.6mm, amber glass 9mm Thread screw neck vial, 1.5mL, 32x11.6mm, clear glass, very high recovery 9mm Thread screw neck vial, 32x11.6mm, 0.3mL microvial, transparent PP 9mm Thread screw neck vial, 32x11.6mm, 0.7mL microvial, transparent PP 9mm Thread screw neck vial, 32x11.6mm, transparent PP, with graduation line, slightly concave shaped bottom 9mm Thread screw neck vial, 32x11.6mm, amber PP, with graduation line, slightly concave shaped bottom 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box Art. Description Pkg 3.B FR 9mm Screw thread cap(royal), made from PP, blue, centre hole 3.R mm Screw thread cap, made from PP, Red, centre hole 111 Sample Vials mm Preassembled caps

114 Autosampler Vials Art. Description Pkg 3.B FR Preassembled cap and septa for 9mm thread screw, PP cap(royal), blue, centre hole, White PTFE/red Rubber, 0.040" thick, Bonded 3.B FR Preassembled cap and septa for 9mm thread screw, PP cap(royal), blue, centre hole, White silicone/red PTFE, 0.040" thick, Bonded 3.B FR Preassembled cap and septa for 9mm thread screw, PP cap(royal), blue, centre hole, Red PTFE/White silicone/ Red PTFE, 0.040" thick 3.B FR Preassembled cap and septa for 9mm thread screw, PP cap(royal), blue, centre hole, White silicone/red PTFE, 0.040" thick, slitted, Bonded FR FR Preassembled cap and septa for 9mm thread screw, design for MS, no bleed, septa no required Preassembled cap and septa for 9mm thread screw, PP cap, black, closed, F217 line The cap with other color upon require. Septa for 9mm Screw Caps Art. Description Pkg FR Septa for 9mm Royal screw thread cap, white PTFE only, 0.010" thick FR Septa for 9mm Royal screw thread cap, White PTFE/red Rubber, 0.040" thick FR Septa for 9mm Royal screw thread cap, White silicone/ Red PTFE, 0.040" thick FR Septa for 9mm Royal screw thread cap, Red PTFE/White Silicone/Red PTFE, 0.040" thick 3.B FR Septa for 9mm Royal screw thread cap, White silicone/ Red PTFE, 0.040" thick, slitted 112 Sample Vials FR

115 Autosampler Vials Screw Thread Neck Vials Why Choose Screw Cap Vials? screw cap vials feature a wider opening than other screw top vials. This increased target area makes sample preparation easier. It also reduces the chances of bent or broken needles during sampling Screw Thread Vials Art. Description Pkg E Thread screw neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO 100pcs. per PP box E EA Thread screw neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO 100pcs. per PP box Screw Caps Art. Description Pkg Screw thread cap, made from PP, black, centre hole Screw thread cap, made from PP, black, closed EA Preassembled Caps Art. Description Pkg CS Septa for Screw Caps Preassembled cap and septa for thread screw, PP cap, black, centre hole, Red rubber/white PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White silicone/red PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, Red PTFE/White Silicone/Red PTFE, 0.040" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White Silicone/Red PTFE, 0.060" thick, slitted Preassembled cap and septa for thread screw, PP cap, black, closed, F217 line Preassembled cap and septa for thread screw, PP cap, black, closed, White silicone/red PTFE Art. Description Pkg Septa for screw thread cap, white PTFE only, 0.010" thick Septa for screw thread cap, White silicone/red PTFE, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, slitted, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, 0.075" thick 113 Sample Vials 3.CS

116 Autosampler Vials 11mm Crimp Neck Vials Why Choose Crimp Cap Vials? Crimp caps provide the tightest seal, reducing the chance of sample evaporation. The 12x32mm crimp vials and 11mm aluminium crimp caps are economical and easy to use with crimping tools. 11mm Crimp Neck Vials Art. Description Pkg L EA 3.L E0 3.L EA 3.L ZE0 3.L ZEA V V0A Z00 11mm Preassembled Crimp Caps 11mm Crimp neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO 11mm Crimp neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO 11mm Crimp neck vial, 32x11.6mm, clear glass, white graduation line and marking spot and LOGO, Silanized 11mm Crimp neck vial, 32x11.6mm, amber glass, white graduation line and marking spot and LOGO, Silanized 11mm Crimp neck micro vial, 0.1ml, 32x11.6mm, clear glass, with integrated micro-insert, white graduation line and marking spot 11mm Crimp neck micro vial, 1.1ml, 32x11.6mm, clear glass, conical bottom 11mm Crimp neck vial, 32x11.6mm, clear glass, high recovery 11mm Crimp neck vial, 1.5mL, V-Vial, 32x11.6mm, clear glass 11mm Crimp neck vial, 1.5mL, V-Vial, 32x11.6mm, amber glass 11mm Crimp neck vial, 32x11.6mm, clear glass, high recovery, Silanized 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 100pcs. per PP box 114 Sample Vials 3.T G00 Art. Description Pkg X MS MS Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, white PTFE septa, 0.010" thick Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, Clear PTFE/Orange Silicone, 0.040" thick Preassembled cap and septa fro 11mm Crimp neck, Aluminum cap, clear, centre hole, Butyl/ nature PTFE, thick Preassembled cap and septa for 11mm Crimp neck, magnetic cap, Silver, centre hole, Clear PTFE/Orange Silicone, 0.040" thick Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, White silicone/red PTFE, 0.050" thick Preassembled cap and septa for 11mm Crimp neck, magnetic cap, Silver, centre hole, White silicone/red PTFE, 0.050" thick Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, Red PTFE/White silicone/red PTFE Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, White silicone/red PTFE, slitted Preassembled cap and septa for 11mm Crimp neck, Aluminum cap, clear, centre hole, Black Viton 100pcs per PE bag Septa for 11mm Crimp Caps Art. Description Pkg Septa for 11mm crimp cap, white PTFE only, 0.010" thick

117 Autosampler Vials 11mm Snap Neck Vials Why Choose Snap Cap Vials? 11mm snap caps provide a secure seal that minimises evaporation, even with volatile samples. Snap caps are often more convenient than crimp caps as they can easily be applied and removed by hand. An audible click ensures a secure seal has been formed and that the cap is correctly aligned. Snap vials can be closed with either snap caps or crimp caps. 11mm Snap Neck Vials Art. Description Pkg 3.S S EA 3.S mm Snap neck vial, 32x11.6mm, clear glass 100pcs. per PP box 3.S E0 11mm Snap neck vial, 32x11.6mm, clear glass, white graduation line and marking spot 100pcs. per PP box 3.S EA 11mm Snap neck vial, 32x11.6mm, amber glass, white graduation line and marking spot 100pcs. per PP box 3.S Z00 11mm Snap neck vial, 32x11.6mm, clear glass, Silanized 100pcs. per PP box 3.S ZE0 11mm Snap neck vial, 32x11.6mm, clear glass, white graduation line and marking spot, Silanized 100pcs. per PP box 3.S ZEA 11mm Snap neck vial, 32x11.6mm, amber glass, white graduation line and marking spot, Silanized 100pcs. per PP box 3.T mm Snap neck Micro vial, 0.1ml, 32x11.6mm,transparent TPX 3.T G00 11mm Snap neck vial, 32x11.6mm, 0.2mL micro-vial, transparent TPX with integrated glass insert 3.T mm Snap neck vial, 32x11.6mm, 0.75mL micro-vial, transparent TPX 3.P mm Snap neck vial, 32x11.6mm, 0.3mL micro-vial, transparent PP 3.P mm Snap neck vial, 32x11.6mm, 0.7mL micro-vial, transparent PP 3.P mm Preassembled Snap Caps Art. Description Pkg B B B B G R Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, molded septum Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, white PTFE septa, 0.010" thick Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, White PTFE/red Rubber Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, White silicone/red PTFE Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, Red PTFE/White silicone/red PTFE Preassembled cap and septa for 11mm Snap neck, PE cap, transparent, centre hole, White silicone/blue PTFE, cross-slitted Preassembled cap and septa for 11mm Snap neck, PE cap, blue, centre hole, white PTFE septa, 0.010" thick Preassembled cap and septa for 11mm Snap neck, PE cap, blue, centre hole, White PTFE/red Rubber Preassembled cap and septa for 11mm Snap neck, PE cap, blue, centre hole, White silicone/red PTFE Preassembled cap and septa for 11mm Snap neck, PE cap, blue, centre hole, Red PTFE/White silicone/red PTFE Preassembled cap and septa for 11mm Snap neck, PE cap, green, centre hole, White PTFE/red Rubber Preassembled cap and septa for 11mm Snap neck, PE cap, Red, centre hole, white PTFE septa, 0.010" thick 115 Sample Vials

118 Autosampler Vials Screw Thread Neck Vials Why Choose 15x45mm Screw Cap Vials? 15x45mm vials have a GPI thread and can hold up to 4ml of sample. They are used by the Waters 48-position autosampler and many others Screw Thread Vials Art. Description Pkg E Thread screw neck vial, 45x14.7mm, clear glass, white graduation line and marking spot and LOGO 100pcs. per PP box E EA Z Thread screw neck vial, 45x14.7mm, amber glass, white graduation line and marking spot and LOGO Thread screw neck vial, 45x14.7mm, clear glass, Silanized 100pcs. per PP box 100pcs. per PP box Z0A Thread screw neck vial, 45x14.7mm, amber glass, Silanized 100pcs. per PP box 3.P Thread screw neck vial, 45x14.7mm, 2.5mL micro-vial, transparent PP Screw Caps Art. Description Pkg EA Screw thread cap, made from PP, black, centre hole 3.W Screw thread cap, made from PP, white, centre hole Screw thread cap, made from PP, black, closed 3.W Screw thread cap, made from PP, white, closed Preassembled Screw Caps 116 Sample Vials 3.W Art. Description Pkg CS W Septa for Screw Caps Cap and septa for thread screw, PP cap, black, centre hole, Red rubber/white PTFE, 0.050" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White silicone/red PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, Red PTFE/White Silicone/Red PTFE, 0.040" thick Preassembled cap and septa for thread screw, PP cap, black, centre hole, White Silicone/Red PTFE, 0.060" thick, slitted Preassembled cap and septa for thread screw, PP cap, black, closed, White silicone/red PTFE Preassembled cap and septa for thread screw, PP cap, black, closed, F217 line Art. Description Pkg Septa for screw thread cap, white PTFE only, 0.010" thick Septa for screw thread cap, White PTFE/red Rubber, 0.050" thick Septa for screw thread cap, White silicone/red PTFE, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, slitted, 0.060" thick Septa for screw thread cap, White silicone/red PTFE, 0.075" thick

119 Autosampler Vials Limited Volume Inserts Why Choose Limited Volume Inserts? Limited volume inserts are an economical solution in sample analysis to reduce the use and waste of solvents and small samples. For optimum instrument performance and accurate test results, use the correct insert is used with the appropriate autosampler vial. Limited Volume Inserts Art. Description Pkg BS E E Insert for small open vial, 31x5mm, clear glass, plastic spring not required, Economic BS Insert for small open vial, 29x5mm, clear glass, preassembled plastic spring X6BS Insert for Screw thread vial, 0.300ml, clear glass, preassembled plastic spring Insert for Screw thread vial, 0.500ml, clear glass, flat bottom Insert for small open vial, 31x5mm, clear glass, flat bottom, heavy wall G Insert for small open vial, 31x5mm, clear glass, flat bottom, mean wall Insert for large open vial, 31x6mm, clear glass, flat bottom, heavy wall E Insert for large open vial, 31x6mm, clear glass, plastic spring not required, Economic BS Insert for large open vial, 29x5.7mm, clear glass, preassembled plastic spring Z600 Insert for large open vial, 31x6mm, clear glass, flat bottom, heavy wal, silanized Z6BS Insert for large open vial, 29x5.7mm, clear glass, preassembled plastic spring, silanized 3.M Insert for small open vial, 27.5x4mm, clear glass, requires metal spring 3.M Insert for Screw thread vial, 40x6mm, clear glass, requires metal spring 3.M metal spring for 3.M , 5x36mm 3.M metal spring for 3.M , 7.5x50mm 3.P BS Insert for small open vial, 29x5mm, transparent plastic, preassembled plastic spring 3.P BS Insert for large open vial, 31x6mm, transparent plastic, preassembled plastic spring 3.P Insert for Screw thread vial, 0.350ml, transparent plastic, Flat bottom 117 Sample Vials

120 Sample Vials Autosampler Vials Shell Vials Shell vials feature thicker walls for safer sample handling. They are compatible with Waters WISP 48 and 96 style autosamplers. All shell vials are supplied with polyethylene plug closures their tear-away design ensures excellent penetration and ventilation during sampling. 3.P Shell Vials Art. Description Pkg ml shell vial, 40x8.2mm, clear glass 100pcs. per PP box A 1ml shell vial, 40x8.2mm, amber glass 100pcs. per PP box ml shell vial, 31.5x11.6mm, clear glass 100pcs. per PP box A 2ml shell vial, 31.5x11.6mm, amber glass 100pcs. per PP box ml shell vial, 44.6x14.65mm, clear glass 100pcs. per PP box A 4ml shell vial, 44.6x14.65mm, amber glass 100pcs. per PP box 3.P ml shell vial, 40x8.2mm, transparent PP 3.P ml shell vial, 31.5x11.6mm, transparent PP 3.P ml shell vial, 44.6x14.65mm, transparent PP 3.P ml shell vial, 40x8.2mm, transparent PP 3.P ml shell vial, 44.6x14.65mm, transparent PP Plug for Shell Vials Art. Description Pkg 3.SB mm transparent PE-plug for shell vial 3.SB mm transparent PE-plug for shell vial 3.SB mm transparent PE-plug for shell vial 3.SB

121 Storage Vials and EPA Vials Storage Vials and EPA Vials Sample Storage Vials These large volume vials are ideal for sample storage and general laboratory use Screw Thread Vials Art. Description Pkg E Thread screw neck vial, 8ml, 61x16.6mm, clear glass, white marking spot and LOGO 100pcs. per Carton E EA Thread screw neck vial, 8ml, 61x16.6mm, amber glass, white marking spot and LOGO 100pcs. per Carton Screw Caps Art. Description Pkg Screw thread cap, made from PP, black, centre hole Screw thread cap, made from PP, black, closed Preassembled Screw Caps Art. Description Pkg EA W Septa for Screw Caps Preassembled cap and septa for thread screw, PP cap, black, closed, Clear silicone/white PTFE, 0.060" thick Preassembled cap and septa for thread screw, PP cap, white, closed, F217 line Art. Description Pkg G Septa for screw thread cap, Clear silicone/white PTFE, 0.060" thick LB Septa for screw thread cap, Clear silicone/white PTFE, 0.060" thick, ultra low bleed Screw Thread Vials Art. Description Pkg E EA Thread screw neck vial, 15ml, 71x20.6mm, clear glass, white marking spot and LOGO Thread screw neck vial, 15ml, 71x20.6mm, amber glass, white marking spot and LOGO Screw Cap and Preassembled Screw Cap 100pcs. per Carton 100pcs. per Carton Art. Description Pkg Screw thread cap, made from PP, black, centre hole Screw thread cap, made from PP, black, closed Preassembled cap and septa for thread screw, PP cap, black, closed, Clear silicone/white PTFE, 0.060" thick Sample Vials Septa for Screw Caps Art. Description Pkg G LB Septa for screw thread cap, Clear silcone/red PTFE, 0.060" thick Septa for screw thread cap, Clear silicone/white PTFE, 0.060" thick, ultra low bleed

122 Storage Vials and EPA Vials EPA Vials Why Choose EPA Vials? EPA vials are specifically designed for use with volatile organic compounds, as recommended by EPA CFR Part 136 and under EPA 40 CFR 141. They are available in both clear and amber borosilicate glass Screw Thread EPA Vials Art. Description Pkg E Thread screw neck EPA vial, 20ml, 57x27.5mm, clear glass, white marking spot and LOGO 100pcs. per Carton EA Thread screw neck EPA vial, 20ml, 57x27.5mm, amber glass, white marking spot and LOGO 100pcs. per Carton E E Thread screw neck EPA vial, 40ml, 95x27.5mm, clear glass, white marking spot and LOGO 100pcs. per Carton EA Thread screw neck EPA vial, 40ml, 95x27.5mm, amber glass, white marking spot and LOGO 100pcs. per Carton E Thread screw neck EPA vial, 60ml, 140x27.5mm, clear glass, white marking spot and LOGO 100pcs. per Carton EA Thread screw neck EPA vial, 60ml, 140x27.5mm, amber glass, white marking spot and LOGO 100pcs. per Carton Screw Caps Art. Description Pkg EA Screw thread cap, made from PP, black, centre hole 3.W Screw thread cap, made from PP, white, centre hole Screw thread cap, made from PP, black, closed 3.W Screw thread cap, made from PP, white, closed Preassembled Screw Caps Art. Description Pkg Preassembled cap and septa for thread screw, PP cap, black, closed, Clear silicone/white PTFE, 0.100" thick Sample Vials Septa for Screw Caps Art. Description Pkg L LB Septa for screw thread cap, white PTFE only, 0.010" thick Septa for screw thread cap, Clear silicone/white PTFE, 0.100" thick Septa for screw thread cap, Clear silicone/white PTFE, 0.100" thick, ultra low bleed LB

123 Headspace Vials Headspace Vials 18mm Precision Thread Neck Headspace vials Why Choose 18mm Precision Thread Headspace vials? Comparable results regarding tightness as with 20mm Crimp Neck Headspace Vials due to the precision thread that draws the septa tight against the via EM0 Reproduceable results, as untightnesses due to crimping faults by incorrectly adjusted or non-adjustable crimpers are excluded. Samples can be taken and stored directly in the field in the analysis vial, so that a later sample transfer in the lab is unnecessary. 18mm Precision Thread Headspace Vials Art. Description Pkg EM EMA EM EMA 18mm precision Thread vial, 10ml, 46x22.5mm, clear glass, rounded bottom, white marking spot and LOGO 18mm precision Thread vial, 10ml, 46x22.5mm, amber glass, rounded bottom, white marking spot and LOGO 18mm precision Thread vial, 20ml, 75.5x22.5mm, clear glass, rounded bottom, white marking spot and LOGO 18mm precision Thread vial, 20ml, 75.5x22.5mm, amber glass, rounded bottom, white marking spot and LOGO 100pcs. per Carton 100pcs. per Carton 100pcs. per Carton 100pcs. per Carton EMA 3.F M0 18mm Preassembled Precision Caps Art. Description Pkg 3.F M0 3.TB M M0 Septa for 18mm Precision Caps Preassembled cap and septa for 18mm precision Thread vial, magnetic cap, clear, centre hole, butyl/ptfe, 0.060" thick Preassembled cap and septa for 18mm precision Thread vial, magnetic cap, clear, centre hole, Translucent Blue silicone/white PTFE, 0.050" thick Preassembled cap and septa for 18mm precision Thread vial, magnetic cap, clear, closed, Red butyl/grey PTFE, 0.050" thick Art. Description Pkg F TB Setpa for 18mm magnetic screw thread cap, White silicone/red PTFE, 0.050" thick(revised ) Setpa for 18mm magnetic screw thread cap, White silicone/blue PTFE, 0.060" thick(revised ) Setpa for 18mm magnetic screw thread cap, butyl/ptfe, 0.060" thick Setpa for 18mm magnetic screw thread cap, Translucent Blue silicone/white PTFE, 0.050" thick 121 Sample Vials

124 Headspace Vials 20mm Crimp Neck Headspace Vials Why Choose Headspace Vials? CNW high quality headspace vials have a bevelled neck for a secure seal, uniform glass thickness for even heat distribution and a stable, strong design for ease of use. They are available with rounded or flat bottom profiles for accurate instrument compatibility. Use with 20mm headspace caps and septa and seal with 20mm crimping accessories. 20mm Crimp Neck Headspace Vials Art. Description Pkg E00 20mm crimp neck headspace vial, 6ml, 38.2x22mm, clear glass, flat bottom, white marking spot and LOGO, for Varian 100pcs. per Carton E EA0 20mm crimp neck headspace vial, 6ml, 38.2x22mm, clear glass, rounded bottom, white marking spot and LOGO, for PE 100pcs. per Carton E00 20mm crimp neck headspace vial, 10ml, 46x22.5mm, clear glass, flat bottom, white marking spot and LOGO, for Carlo Erba/Dani/Fisons/Agilent 100pcs. per Carton EA0 20mm crimp neck headspace vial, 10ml, 46x22.5mm, clear glass, rounded bottom, white marking spot and LOGO, for CTC/Varian 100pcs. per Carton EAA 20mm crimp neck headspace vial, 10ml, 46x22.5mm, amber glass, rounded bottom, white marking spot and LOGO, for CTC/Varian 100pcs. per Carton E00 20mm crimp neck headspace vial, 20ml, 75.5x22.5mm, clear glass, flat bottom, white marking spot and LOGO, for Carlo Erba/Dani/Fisons/Agilent 100pcs. per Carton EA EAA 20mm crimp neck headspace vial, 20ml, 75.5x23mm, clear glass, rounded bottom, white marking spot and LOGO, for PE/Tekmar 20mm crimp neck headspace vial, 20ml, 75.5x23mm, amber glass, rounded bottom, white marking spot and LOGO, for PE/Tekmar 100pcs. per Carton 100pcs. per Carton E00 20mm crimp neck headspace vial, 50ml, 101x31mm, clear glass, flat bottom, white marking spot and LOGO 100pcs. per Carton mm crimp neck headspace vial, 100ml, 94.5x51.6mm, clear glass, flat bottom, 3rd hydro;. Class 88pcs. Shrinkwrapped Sample Vials E00 20mm Crimp Caps Art. Description Pkg Aluminum cap for 20mm crimp neck vial, without septa SS Safty aluminum cap for 20mm crimp neck vial, without septa Septa for 20mm Crimp Caps Art. Description Pkg G TB Septa for 20mm crimp neck headspace vial, Butyl Injection Stopper, grey Septa for 20mm crimp neck headspace vial, Butyl/PTFE, 0.120" thick Septa for 20mm crimp neck headspace vial, Translucent Blue silicone/nature PTFE, 0.125" thick Septa for 20mm crimp neck headspace vial, Clear silicone/white PTFE, 0.125" thick 3.TB MY

125 Headspace Vials 20mm Preassembled Crimp Caps Art. Description Pkg Preassembled cap and septa for 20mm crimp neck headspace vial, Aluminum cap, clear, centre hole, Clear silicone/white PTFE, 0.125" thick SS Preassembled cap and septa for 20mm crimp neck headspace vial, Safty aluminum cap, clear, centre hole, Clear silicone/white PTFE, 0.125" thick 3.F Preassembled cap and septa for 20mm crimp neck headspace vial, Aluminum cap, clear, centre hole, butyl/ PTFE, 0.120" thick 3.F MY Preassembled cap and septa for 20mm crimp neck headspace vial, Magnetic cap, yellow, centre hole, butyl/ PTFE, 0.120" thick EAA 3.F SS Preassembled cap and septa for 20mm crimp neck headspace vial, Safty Aluminum cap, clear, centre hole, butyl/ptfe, 0.120" thick 3.TB Preassembled cap and septa for 20mm crimp neck headspace vial, Aluminum cap, clear, centre hole, Translucent Blue silicone/white PTFE, 0.125" thick 3.TB MY Preassembled cap and septa for 20mm crimp neck headspace vial, Magnetic cap, yellow, centre hole, Translucent Blue silicone/white PTFE, 0.125" thick 3.TB SS Preassembled cap and septa for 20mm crimp neck headspace vial, Safty aluminum cap, clear, centre hole, Translucent Blue silicone/white PTFE, 0.125" thick SS 123 Sample Vials

126 Sample Vials Headspace Vials Crimpers & Decrimpers Painted, plated and coated for maximum corrosion resistance Adjustable stop for optimal sealing performance Textured handles for excellent grip Controlled, low-effort method for removing caps, reducing both sample spillage and breakages Crimping Tools Art. Description Pkg Crimper for 8mm Aluminum caps 1 pc. Per box Crimper for 11mm Aluminum caps 1 pc. Per box Crimper for 13mm Aluminum caps 1 pc. Per box Crimper for 20mm Aluminum caps 1 pc. Per box Decapper for 8mm Aluminum caps 1 pc. Per box Decapper for 11mm Aluminum caps 1 pc. Per box Decapper for 13mm Aluminum caps 1 pc. Per box Decapper for 20mm Aluminum caps 1 pc. Per box Special Products Art. Description Pkg 3.P P A 50mL white wide mouth glass jar, neck DIN 40, with black PPN-caps, with white 2 mm PE-foam inlays 50mL amber wide mouth glass jar, neck DIN 40, with black PPN-caps, with white 2 mm PE-foam inlays 24 pcs. Per carton 24 pcs. Per carton

127 Sampling Bottles Sampling Bottles Straight Sided Jar The clear glass straight-sided jars with lined black phenolic moulding powder caps are available in your choice of three sizes. Select the size that fits your needs. The cap with mounted waxed KKPVDC-liner. Art. Description Pkg 3.P P P mL flint glass jar, screw finish 38/R3, material phenolic moulding powder, mounted waxed KKPVDC-liner 60mL flint glass jar, screw finish 51/R3, material phenolic moulding poeder, mounted waxed KKPVDC-liner 120mL flint glass jar, screw finish 58/R3, material phenolic moulding powder, mounted waxed KKPVDCliner 48 pcs. Per carton 48 pcs. Per carton 12 pcs. Per carton Wide Mouth Jar The wide mouth jars can be choiced clear glass and amber glass with five sizes. The LKD cap made from PP black color. Art. Description Pkg 3.P Weithalsglaeser, Material:Glas Hydrolytische Klasse III, weib, 30mL, with DIN 32, PP, LKD cap 48 pcs. Per carton 3.P A Weithalsglaeser, Material:Glas Hydrolytische Klasse III, braun, 30mL, with DIN 32, PP, LKD cap 48 pcs. Per carton 3.P Weithalsglaeser, Material:Glas Hydrolytische Klasse III, weib, 50mL, with DIN 32, PP, LKD cap 24 pcs. Per carton 3.P A Weithalsglaeser, Material:Glas Hydrolytische Klasse III, braun, 50mL, with DIN 32, PP, LKD cap 24 pcs. Per carton 3.P Weithalsglaeser, Material:Glas Hydrolytische Klasse III, weib, 125mL, with DIN 40, PP, LKD cap 12 pcs. Per carton 3.P A Weithalsglaeser, Material:Glas Hydrolytische Klasse III, braun, 125mL, with DIN 40, PP, LKD cap 12 pcs. Per carton P Weithalsglaeser, Material:Glas Hydrolytische Klasse III, weib, 250mL, with DIN 55, PP, LKD cap 12 pcs. Per carton 3.P A 3.P P A Weithalsglaeser, Material:Glas Hydrolytische Klasse III, braun, 250mL, with DIN 55, PP, LKD cap Weithalsglaeser, Material:Glas Hydrolytische Klasse III, weib, 500mL, with DIN 55, PP, LKD cap Weithalsglaeser, Material:Glas Hydrolytische Klasse III, braun, 500mL, with DIN 55, PP, LKD cap 12 pcs. Per carton 6 pcs. Per carton 6 pcs. Per carton Sample Vials

128 Labware Centrifuge Tubes Culture Tube and Test Tube Pipette Tips

129 Labware Centrifuge Tubes These centrifuge tubes with conical bottom are available bottom are available in two sizes i.e.15 ml. Molded in polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. Art. Description Pkg Centrifuge tubes 15ml, conical,17*120mm, sterile Centrifuge tubes 50ml, conical, 30*115mm, sterile 25 pcs. Per PE bag, 10 bags Per carton 25 pcs. Per PE bag, 10 bags Per carton Culture Tube and Test Tube Our Test Tubes and Culture Tubes are manufactured from tubing that has uniform wall thickness and exacting diameters. Rims are fire polished and smooth; tube bottoms are perfectly formed. Whether plain top, screw-capped, glass stoppered or flared rim, these Test Tubes will always perform in your lab. Test Tube Art. Description Pkg Test tube, AR glass, 4mL, O.D. 10mm x L 75mm,wall thickness 0.6mm 250pcs. per PP box Test tube, AR glass, 6mL, O.D. 12mm x L 75mm,wall thickness 0.6mm 250pcs. per PP box Test tube, AR glass, 10mL, O.D. 13mm x L 100mm,wall thickness 0.6mm Test tube, AR glass, 15mL, O.D. 16mm x L 100mm,wall thickness 0.7mm 250pcs. per PP box 250pcs. per PP box Test tube, AR glass, 24mL, O.D. 16mm x L 150mm,wall thickness 0.7mm 250pcs. per PP box Test tube, AR glass, 28mL, O.D. 18mm x L 150mm,wall thickness 0.8mm Test tube, AR glass, 20mL, O.D. 20mm x L 150mm,wall thickness 0.8mm Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 13 x 100mm, 8mL Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 16 x 100mm, 12mL Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 16 x 125mm, 16mL 250pcs. per PP box 250pcs. per PP box 100pcs. Per Carton 100pcs. Per Carton 100pcs. Per Carton Labware Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 16 x 150mm, 20mL 100pcs. Per Carton Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 20 x 125mm, 25mL 100pcs. Per Carton Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 20 x 150mm, 30Ml 100pcs. Per Carton Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 25 x 150mm, 50mL 100pcs. Per Carton Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 25 x 200mm, 70mL 100pcs. Per Carton Culture Tubes, Reusable, with Screw Cap With PTFE- Faced Rubber-Lined Caps, 38 x 200mm, 160mL 100pcs. Per Carton

130 Labware Pipette Tips Precision in any detail guarantees highest quality. Made of high quality polypropylene Firm fit on pipettor cones Optimum handling due to straight shape Special ionization process guarantees dust free tip production Excellent transparency due to optimum surface quality Minimum fluid retention due to controlled raw material quality Excellent volumetric accuracy due to precisely molded tip orifices Most practical tip volumes Autoclavable 128 Labware Art. Description Pkg K k K K K Pipette tips, Nature, ul, Universal design, Ultra Micro Tips Pipette tips, Nature, ul, Universal design, Ultra Micro Tips Pipette tips, Nature, 1-200ul, Universal design, Ultra Micro Tips Pipette tips, Nature, 1-200ul, Universal design, Ultra Micro Tips Pipette tips, Nature, 1-300ul, Universal design, Ultra Micro Tips Pipette tips, Nature, 1-300ul, Universal design, Ultra Micro Tips Pipette tips, Nature, ul, Universal design, Ultra Micro Tips Pipette tips, Blue, ul, Design for Brand, Ultra Micro Tips Pipette tips, Blue, ul, Universal design, Ultra Micro Tips Pipette tips, Nature, 1-5ml, Design for Biohit/ Eppendorf/Labmate/Socorex/Witeg Pipette tips, Nature, 1-5ml, Design for CappAero/ Gilson Pipette tips, Nature, 1-5ml, Design for Brand/ Finnpipette Pipette tips, Nature, 1-5ml, Design for Brand, Ultra Micro Tips Pipette tips, Nature, 2-10ml, Design for Finnpipette/ Gilson/Socorex 1000pcs. per PE bag 96pcs. per PP box 1000pcs. per PE bag 96pcs. per PP box 1000pcs. per PE bag 96pcs. per PP box 1000pcs. per PE bag 500pcs. per PE bag 96pcs. per PP box 300pcs. per PE bag 250pcs. per PE bag 500pcs. per PE bag 200pcs. per PE bag

131 Reagents Solvents for HPLC HPLC Buffers Solvents for GC residue analysis ACS Reagents

132 Solvents for HPLC Solvents for HPLC HPLC solvents are controlled to meet high quality requirements. Low UV-absorbance, assuring optimum sensitivity. Low content of non-volatile components like water, free acid and free alkali. Low particulates, pre-filtration is not necessary. High assay, assuring high purity. Good reproducibility and consistency among batches Acetonitrile, UV-IR-HPLC-isocratic Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 190 nm (cut off) % 193 nm... 60% 195 nm % 200 nm % nm % Fluorescence (as quinine): 254 nm... 1ppb 365 nm... 1ppb Art. Package Units/Box st L L Methanol, UV-IR-HPLC-HPLC isocratic 130 Reagents Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry.... p/t. UV Spectrum (1cm cell; Ref.: water) 205 nm (cut off)... 10% 210 nm.. 20% 220 nm... 50% 230 nm... 80% 240 nm... 90% nm % Fluorescence (as quinine): 254 nm... 1ppb 365 nm ppb Art. Package Units/Box st L L Acetone, UV-IR-HPLC Bottle Cap For more information about this product, please refer to page 53. Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter %

133 Solvents for HPLC Acidity meq/g Alkalinity meq/g Methanol(G.C.) % 2-Propanol(G.C.) % Reducing substances to KMnO4 (as O) % Aldehydes(as HCHO) % Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 329 nm (cut off) % 330 nm... 15% 335 nm % 340 nm % 345 nm % Fluorescence (as quinine): 365 nm... 2 ppb Art. Package Units/Box st L L Benzene, UV-IR-HPLC-GPC Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Darkened substances by H2SO p/t. Sulphur compounds (as CS2) % Tiophene (C4H4S) % Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 278 nm(cut off) % 280 nm % 285 nm % 290 nm % 300 nm % 320 nm % nm % Fluorescence (as quinine): 365 nm... 2ppb Art. Package Units/Box st ml L HPLC Columns For more information about this product, please refer to pages Butanol, UV-IR-HPLC Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry....p/t. UV Spectrum (1cm cell; Ref.: water) 207 nm(cut off) % 210 nm % 220 nm % 230 nm % 240 nm % Reagents

134 Solvents for HPLC 250 nm % nm % Art. Package Units/Box st L L L tert-butyl methyl ether, UV-IR-HPLC-HPLC preparative Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 208 nm (cut off) % 210 nm... 20% 235 nm % 240 nm... 60% 255 nm... 85% nm % Fluorescence (as quinine): 254 nm... 2ppb 365 nm... 2ppb Art. Package Units/Box st L L cyclohexane, UV-IR-HPLC 132 Reagents Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 208 nm(cut off)... 10% 210 nm... 15% 220 nm % 230 nm... 75% 240 nm... 90% 250 nm % nm % Fluorescence (as quinine): 254 nm... 1ppb 365 nm... 1ppb Art. Package Units/Box st L L 4

135 Solvents for HPLC Dichloromethane, HPLC-HPLC preparative-gpc Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Free chlorine (Cl) % UV Spectrum (1cm cell; Ref.: water) 233 nm (cut off) % 235 nm... 30% 240 nm % 245 nm % 255 nm... 98% nm... 99% Art. Package Units/Box st L L Dimethyl Sulphoxide, UV-IR-HPLC-GPC Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry.... p/t. UV Spectrum (1cm cell; Ref.: water) 265 nm (cut off) % 270 nm % 280 nm % 290 nm % 310 nm % 330 nm % nm % Fluorescence (as quinine): 365 nm ppb Art. Package Units/Box st ml L L Ethyl acetate, UV-IR-HPLC-HPLC preparative Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 253 nm (cut off) % 255 nm % 257 nm % 260 nm % 263 nm % 265 nm % Reagents

136 Solvents for HPLC nm % Fluorescence (as quinine): 254 nm... 2 ppb 365 nm.... 1ppb Art. Package Units/Box st L L n-hexane, UV-IR-HPLC Minimum assay (GC) (as n-hexane) % Minimum assay (GC) (as isomers) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Sulphur compounds (as S) % Tiophene (C4H4S) p/t Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 195 nm (cut off) % 200 nm... 20% 210 nm % 220 nm... 80% 230 nm... 94% nm % Art. Package Units/Box st L L Isooctane (UV-IR-HPLC) 134 Reagents Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Sulphur compounds (as S) % Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 205 nm (cut off) % 210 nm % 220 nm % 235 nm... 90% nm % Fluorescence (as quinine): 254 nm... 1 ppb 365 nm.... 1ppb Art. Package Units/Box st L L 4 Syringe Filters For more information about this product, please refer to pages Propanol, HPLC Minimum assay (GC) %

137 Solvents for HPLC Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g UV Spectrum (1cm cell; Ref.: water) 207 nm (cut off) % 217 nm... 50% 232 nm % 242 nm... 90% 250 nm... 98% nm % Art. Package Units/Box st L L Tetrahydrofuran, inhibitor-free, UV-IR-HPLC-GPC Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Peroxides (as H2O2) % Acidity meq/g Alkalinity meq/g Suitability for IR spectrometry... p/t. UV Spectrum (1cm cell; Ref.: water) 215 nm (cut off) % 240 nm... 30% 245 nm % 260 nm... 70% 265 nm... 80% 275 nm... 90% nm % Art. Package Units/Box st L L Water, UV- HPLC Specific conductance at 25 C (Measured during production)non-volatile.... 1,0x10-6ohm-1cm-1 Non-volatile matter % Reducing substances to KMnO4.... p/t. Suitability for gradient acc. to ACS p/t. UV Spectrum (1cm cell; Ref.: water) 200 nm % 210 nm % 254 nm... 99% nm % Fluorescence (as quinine): 254 nm.... 1ppb 365 nm ppb 135 Reagents GCB SPE Column For more information about this product, please refer to page 21. Art. Package Units/Box st L L 4

138 HPLC Buffers HPLC Buffers CNW offers HPLC buffers as mobile phase modifiers for HPLC. The specifications that assure the suitability of these reagents for sensitive gradient elutions include: RP gradient test correspons. Clear solution in the solubility test no residue in the filter test (0.45μm membrane filter). Defined maximum UV absorption value at HPLC relevant wavelength. Defined ph in aqueous solution Acetic acid, for HPLC Minimum assay (GC) % Chloride (Cl) % Phosphate (PO4) % Sulfate (SO4) % Non-volatile matter % Acetaldehyde % Acetic anhydride % UV absorption (50% in H2O) λ 260 nm.... max 0.05 λ 270 nm.... max 0.02 λ 300 nm.... max 0.01 λ 500 nm.... max 0.01 Art. Package Units/Box st ml ml L Ammonium acetate, for HPLC 136 Reagents Minimum assay (acidimetric) % ph value (10% in H2O, 20 C) Nitrate (NO3) % Chloride (Cl) % Sulphate (SO4) % Non-volatile matter % UV absorption (10% in H2O) λ 250 nm.... max 0.05 λ 260 nm.... max 0.04 λ 270 nm.... max 0.03 λ 280 nm.... max 0.02 λ 500 nm.... max 0.02 Art. Package Units/Box st g g g Ammonium formate, for HPLC GC Columns For more information about this product, please refer to pages Minimum assay(dried material) % Total impurities(as H2O) % ph value (10% in H2O, 20 C) Chloride (Cl) % Sulfate (SO4) %

139 HPLC Buffers UV absorption (10% in H2O) λ 250 nm.... max 0.05 λ 260 nm.... max 0.04 λ 270 nm.... max 0.03 λ 280 nm.... max 0.02 λ 500 nm.... max 0.01 Art. Package Units/Box st g g g Ammonium hydroxide solution, for HPLC Assay (acidimetric, NH3)... ~10.0% Chloride (Cl) % Sulfate (SO4) % Sulfite (SO3) % UV absorption (50% in H2O) λ 270 nm.... max 0.05 λ 280 nm.... max 0.04 λ 290 nm.... max 0.03 λ 300 nm.... max 0.02 Art. Package Units/Box st ml ml L Ammonium dihydrogen phosphate, for HPLC Minimum assay (acidimetric) % ph value (10% in H2O, 20 C) Chloride (Cl) % Nitrate (NO3) % Sulfate (SO4) % UV absorption (10% in H2O) λ 210 nm.... max 0.05 λ 220 nm.... max 0.04 λ 240 nm.... max 0.02 λ 500 nm.... max Sample Vials For more information about this product, please refer to pages Art. Package Units/Box st g g g di-ammonium hydrogen phosphate, for HPLC Minimum assay (acidimetric) % ph value (5% in H2O, 20 C) Chloride (Cl) % Nitrate (NO3) % Sulfate (SO4) % UV absorption (10% in H2O) λ 220 nm.... max 0.10 λ 230 nm.... max 0.06 Reagents

140 HPLC Buffers λ 240 nm.... max 0.01 λ 300 nm.... max 0.01 Art. Package Units/Box st g g g Ammonium bicarbonate, for HPLC Minimum assay (acidimetric) % ph value (1M in H2O, 20 C) Insoluble matter % Chloride (Cl) % Sulfate (SO4) % Non-volatile matter % UV absorption (10% in H2O) λ 235 nm.... max 0.10 λ 240 nm.... max 0.05 λ 250 nm.... max 0.02 λ 260 nm.... max 0.02 λ 280 nm.... max 0.01 λ 500 nm.... max 0.01 Art. Package Units/Box st g g g Disposable Gloves For more information about this product, please refer to page Ammonium carbonate, for HPLC Assay(acidmetric, NH3) ~33% Insoluble matter % Chloride (Cl) % Sulfate (SO4) % Non-volatile matter % UV absorption (10% in H2O) λ 240 nm.... max 0.10 λ 250 nm.... max 0.04 λ 260 nm.... max 0.02 λ 280 nm.... max 0.01 λ 500 nm.... max 0.01 Reagents Art. Package Units/Box st g g g Citric acid, for HPLC Minimum assay (acidimetric) % Water (Karl Fisher) % Sulfate (SO4) % Sulfate (SO4) % Heavy metals(as Pb) % UV absorption (5% in H2O) λ 260 nm.... max 0.10

141 HPLC Buffers λ 270 nm.. max 0.07 λ 280 nm.. max 0.05 λ 300 nm.. max 0.03 λ 500 nm.. max 0.01 Art. Package Units/Box st g g g Diethylamine, for HPLC Minimum assay (acidimetric) % Water (Karl Fischer) % UV absorption (1% in H2O) λ 254 nm.... max 0.10 λ 265 nm.... max 0.04 λ 300 nm.... max 0.02 Art. Package Units/Box st ml ml L Formic acid, for HPLC Minimum assay (GC) % Chloride (Cl) % Sulfate (SO4) ,,,,,,,,,,,,,,,,,,,,,,,,,, 0.005% Sulfite (SO3) % UV absorption (50% in H2O) λ 270 nm.... max 0.05 λ 280 nm.... max 0.04 λ 290 nm.... max 0.03 λ 300 nm.... max 0.02 Art. Package Units/Box st ml ml L ortho-phosphoric acid, for HPLC Assay (GC) % Chloride (Cl) % Fluoride (F) % Nitrate (NO3) % Sulfate (SO4) % Volatile acid (CH3COOH) % UV absorption (50% in H2O) λ 210 nm..... max 0.07 λ 220 nm..... max 0.05 λ 230 nm..... max 0.04 λ 250 nm..... max 0.04 Reagents

142 HPLC Buffers Art. Package Units/Box st ml ml L di-potassium hydrogen phosphate, for HPLC Minimum assay (acidmetric) % ph value (10% in H2O, 20 C) Chloride (Cl) % Sulfate (SO4) % UV absorption (10% in H2O) λ 230 nm..... max 0.10 λ 240 nm..... max 0.09 λ 250 nm..... max 0.08 λ 310 nm..... max 0.03 λ 500 nm..... max 0.02 Art. Package Units/Box st g g g Potassium dihydrogen phosphate, for HPLC Minimum assay (acidmetric) % ph value (5% in H2O, 20 C) Chloride (Cl) % Sulfate (SO4) % UV absorption (0.66M in H2O) λ 210 nm..... max 0.10 λ 240 nm..... max 0.06 λ 260 nm..... max 0.04 λ 300 nm..... max 0.02 λ 500 nm..... max Art. Package Units/Box st g g g 6 Reagents Sodium bicarbonate, for HPLC Minimum assay (acidmetric) % ph value (1% in H2O, 20 C) Carbonate(CO3) % Chloride (Cl) % Sulphate (SO4) % UV absorption (10% in H2O) λ 240 nm..... max 0.10 λ 250 nm..... max 0.04 λ 260 nm..... max 0.02 λ 280 nm..... max 0.01 λ 500 nm.... max 0.01

143 HPLC Buffers Art. Package Units/Box st g g g Sodium carbonate, anhydrous, for HPLC Minimum assay (acidimetric,dried substance) % Insoluble matter % Chloride (Cl) % Total sulfur (as SO4) % Phosphate(PO4) % Total nitrogen % UV absorption (10% in H2O) λ 245 nm..... max 0.10 λ 250 nm..... max 0.05 λ 270 nm..... max 0.03 λ 300 nm..... max 0.02 λ 450 nm.... max 0.01 Art. Package Units/Box st g g g Sodium formate, anhydrous, for HPLC Minimum assay (perchloric acid titration) % Insoluble matter % ph value (10% in H2O, 20 C) Chloride (Cl) % Phosphate(PO4) % Sulfate (SO4) % Heavy metals(as Pb) % UV absorption (10% in H2O) λ 260 nm..... max 0.05 λ 270 nm..... max 0.04 λ 300 nm..... max 0.03 λ 330 nm..... max 0.02 λ 500 nm.... max Art. Package Units/Box st g g g Sodium acetate, for HPLC Minimum assay (perchloric acid titration) % ph value (10% in H2O, 20 C) Chloride (Cl) % Phosphate(PO4) % Sulfate (SO4) % UV absorption (10% in H2O) λ 250 nm..... max 0.05 λ 260 nm..... max 0.01 λ 330 nm..... max 0.01 λ 500 nm.... max 0.01 Reagents

144 HPLC Buffers Art. Package Units/Box st g g g Sodium dihydrogen phosphate dihydrate, for HPLC Minimum assay (acidmetric) % ph value (5% in H2O, 20 C) Chloride (Cl) % Sulfate (SO4) % UV absorption (10% in H2O) λ 210 nm..... max 0.10 λ 260 nm..... max 0.06 λ 280 nm..... max 0.04 λ 320 nm..... max 0.02 λ 500 nm.... max 0.02 Art. Package Units/Box st g g g di-sodium hydrogen phosphate, for HPLC Minimum assay (acidmetric) % ph value (5% in H2O, 20 C) Chloride (Cl) % Sulfate (SO4) % UV absorption (0.33M in H2O) λ 220 nm..... max 0.10 λ 230 nm..... max 0.05 λ 240 nm..... max 0.04 λ 260 nm..... max 0.02 λ 500 nm.... max Art. Package Units/Box st g g g 6 Reagents Triethylamine, for HPLC Minimum assay (GC) % Water (Karl Fischer) % UV absorption (50% in H2O) λ 254 nm.... max 0.10 λ 265 nm.... max 0.04 λ 300 nm.... max 0.02 Art. Package Units/Box st ml ml L 6

145 HPLC Buffers Trifluoroacetic acid, for HPLC Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Phosphate (PO4) % UV absorption λ 230 nm.... max 0.15 λ 254 nm.... max 0.01 Art. Package Units/Box st ml ml ml Reagents

146 Solvents for GC Residue Analysis Solvents for GC residue analysis Solvents for GC residue analysis were developed especially for the application in residue analysis of pesticides and other low-volatile, environmentally relevant substances by means of GC/ECD or GC/PND, organochlorinated pesticides, dioxin, furan, PCBs and so on Acetonitrile, GC residue analysis Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t Art. Package Units/Box st L L Methanol, GC residue analysis Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t 144 Art. Package Units/Box st L L 4 Reagents Acetone, GC residue analysis Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t

147 Solvents for GC Residue Analysis Art. Package Units/Box st L L Cyclohexane, GC residue analysis Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t Art. Package Units/Box st L L Dichloromethane, GC residue analysis Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Alkalinity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t Art. Package Units/Box st L L Ethyl acetate, GC residue analysis 145 Minimum assay (GC) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t Reagents Art. Package Units/Box st L L 4

148 Solvents for GC Residue Analysis n-hexane, for GC residue analysis Minimum assay (GC) (as n-hexane) % Minimum assay (GC) (as isomers) % Water (Karl Fischer) % Non-volatile matter % Acidity meq/g Signal ECD of pesticide (Lindane to DDT) (as Lindane) ng/l Signal PND of pesticide (Ethylparathion to Coumaphos) (as Ethylparathion) ng/l Signal FID of 2-Octanol to Tetradecanol (as 2-Octanol) p/t Art. Package Units/Box st L L Reagents

149 ACS Reagents ACS Reagents ACS Reagents are generally used for analytical laboratory work. Moreover, these reagents are also usually used in the productive field. The quality of these reagents is strictly controlled, with high major components, and low impurities. Each reagent has its own certificate of analysis (COA) and individual expiration date Acetic Acid glacial (Reag. Ph. Eur.) ACS-ISO Minimum assay (G.C.) % Non-volatile matter % Insoluble matter in H2O... p/t Residue on ignition (as SO4) % Reducing substances to K2Cr2O p/t Reducing substances to KMnO p/t Alkalinity ,0004 meq/g Acetaldehyde(CH3CHO) % Water (H2O) % Acetic anhydride [(CH3CO)2O] G.C.) % Chloride (Cl) % Formate (HCOO) % Nitrate (NO3) % Phosphate (PO4) % Sulphate (SO4) % Heavy metals (as Pb) % Ag Li Al Mg Au Mn B Mo Ba Na Be Ni Bi Pb Ca Pt Cd Sb Co Si Cr Sn Cu Sr Fe Ti Ga Tl Ge V Hg Zn In Zr K Art. Package Units/Box st L L Formic acid, 98.0%, ACS Minimum assay (acidimetric) % Non-volatile matter % Insoluble matter in H2O... p/t Acetic Acid (CH3COOH) % Chloride (Cl) % Sulphate (SO4) % Sulphite (SO3) % Ammonium (NH4) % Heavy metals (as Pb) % Metals by ICP [mg/kg (ppm)] Ag Li Al Mg Au Mn Reagents

150 ACS Reagents B Mo Ba Na... 1 Be Ni Bi Pb Ca Pt Cd Sb Co Si Cr Sn Cu Sr Fe Ti Ga Tl Ge V Hg Zn In Zr K Art. Package Units/Box st L L Nitric acid, 65.0%, for analysis, for determination with dithizone Minimum assay (acidimetric) % residue on ignition (S04) % Heavy metals (as Pb) <0.0002% Metals by ICP [mg/kg (ppm)] Ag Mg Al Mn As Mo Ba Na Be Ni Bi Pb Ca Cd Cd Sr Cr Ti Co TI Cu V Fe Zn Ge Zr Art. Package Units/Box st L L 4 Reagents Carbon disulfide, 99.9%, low benzene, for analysis, for determination of benzene and its analogies Minimum Assay (GC) % Water (Karl Fishcher) % Non-volatile matter % Sulphate (SO4) % Sulfite (SO3) % Benzene % Boiling range c Art. Package Units/Box st ml L 6

151 Art Index Art Page Art Page Art Page Art Page Art Page Art Page 1.0B100C B100P B B B B200C B200P B B B B300C B400P B B B B810P B B B B B B B B S100C S100P S S S S200C S200P S S S S300C S400P S S S S810P S S S S S S S S P OH OH

152 Art Index 150 Art Page Art Page Art Page Art Page Art Page Art Page

153 Art Index Art Page Art Page Art Page Art Page Art Page Art Page B B B B B B MS08OZ S S S S S S CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA

154 Art Index 152 Art Page Art Page Art Page Art Page Art Page Art Page 2.CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CA CF CF CF CF CF CF CF CF CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CR CR01PE CR CR CR03PE CR CR06PE CR CR10PE CR CR CR35PE CR CR60PE CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR CR BS E X6BS BS G E Z6BS Z A A A SS MS MS SS FR FR M EA U V V0A V V0A Z E EA Z Z0A

155 Art Index Art Page Art Page Art Page Art Page Art Page Art Page E E EA EA Z Z0A ZE ZEA E E EA EA E EA Z Z0A E EA E EA EM EMA E EA EAA E EA EM EMA E EA EAA E EA E EA E E EA FR FR FR FR FR FR LB LB TB G F G G TB LB L B FR B FR B FR B FR B FR B B B B B CS CS CS CS F MY F SS F F M G L E L EA L ZE L ZEA M M M M P BS P BS P P P P P P P P P P A P A P A P A P P P A P P P P A P P P P P P P A P R R S S E S EA S Z S ZE S ZEA SB SB SB T T T G T TB MY TB SS TB TB M W W W W W W W W X B B B W W W k K K K K A225A A302A I I L P A A U A U U U U U F F F F F A A A A A A A U U U A U A A U U M A A A A A P P A C

156 154 Art Page Art Page Art Page Art Page Art Page Art Page XL XL XL XL XL

157

158 CNW Technologies GmbH Kölner Landstrasse 40 D Düsseldorf Germany Tel:+49(0) Fax:+49(0) Website: