VWR Spec-Wipe Wipers. For Cleanrooms and Other Controlled Environments
|
|
|
- Jean Thompson
- 7 years ago
- Views:
Transcription
1 VWR Spec-Wipe Wipers For Cleanrooms and Other Controlled Environments
2 VWR Spec-Wipe Wipers For Cleanrooms and Other Controlled Environments Why choose VWR Spec-Wipe wipers? VWR Spec-Wipe wipers are designed, manufactured, and tested to meet your critical contamination control needs. All VWR Spec-Wipe wipers are subjected to rigorous quality control procedures to ensure that critical product specifications have been met. Strict guidelines are adhered to during all stages of manufacturing. Internal testing and routine audits are used to monitor the quality of the VWR Spec-Wipe production process. What makes VWR Spec-Wipe wipers different? VWR Spec-Wipe products meet demanding standards for quality, consistency, and cleanliness. It is these uncompromising standards that allow us to bring you the following benefits in a cleanroom wiper: The attention to detail given to each VWR Spec-Wipe product is uncompromising. We consider factors such as fiber length, integrity of knitted fibers, and the techniques used to convert the wipers to size. Observing these details requires microscopic investigation to ensure VWR Spec-Wipe wipers meet critical specifications. Knitted polyester VWR Spec-Wipe wipers are processed in a state-ofthe-art ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom laundry with a DI water system, extensive in-line saturation facilities, and on-site testing laboratories. What about Sterile VWR Spec-Wipe wipers? Sterile VWR Spec-Wipe products receive additional attention due to the stringent requirements of environments in which they will be used: All sterile VWR Spec-Wipe products are sterilized with Cobalt 60 gamma radiation to a Sterility Assurance Level (SAL) of 10-6 in accordance with ANSI/AAMI/ISO 11137:2006 guidelines. Quarterly audits are performed on sterile VWR Spec-Wipe products to validate the sterilization dose. Each package is identified with a lot number for traceability. Each case of material includes a Certificate of Sterility. A sterility validation report is available upon request. To request a copy of this report, please visit contact your local VWR Sales Representative. What s the right VWR Spec-Wipe wiper for your cleanroom or critical environment application? To determine which VWR Spec-Wipe wiper is the best for your cleaning application, three key points must be addressed: 1. How clean does the wiper have to be? The cleanliness of a wiper is determined through the examination of four factors: particle generation, fiber generation, extractables, and metallic ions. Particle Generation: The biaxial shake test is used to measure particle generation. In this test, a wiper is placed in a jar of water and shaken. Under these conditions, particles are released from the wiper (in response to the wetting by the water) and generated by the wiper (in response to the mechanical energy imparted by the agitation). Aliquots of water are removed and assayed to determine the sum of the releasable and generated particles. Fiber Generation: A fiber is defined as a particle with a length-to-width ratio exceeding 10 to 1 and a length equal to or greater than 100μm. The purpose of the fiber test is to determine the number of fibers that 2
3 VWR Spec-Wipe Wipers for Cleanrooms & Other Controlled Environments VWR Spec-Wipe Wiper Selection Guide Low Particle Generation Low Extractables Recommended Cleanroom Application Product Description High Sorbency Good Spec-Wipe 3e Lightweight, poly/cell, creped nonwoven ISO Class 6 (Class 1000) Better Spec-Wipe 3 Poly/cell, nonwoven ISO Class 6 (Class 1000) Spec-Wipe 3 Sterile Poly/cell, nonwoven, sterile ISO Class 6 (Class 1000) Spec-Wipe 3 Presaturated Poly/cell, nonwoven, presaturated n/a 2 2 ISO Class 6 (Class 1000) Spec-Wipe 5 Treated, poly/cell, nonwoven ISO Class 6 (Class 1000) Best Spec-Wipe 4 Knitted polyester ISO Class 5 (Class 100) Spec-Wipe 4 Sterile Knitted polyester, sterile ISO Class 5 (Class 100) Spec-Wipe 4 Presaturated Knitted polyester, presaturated n/a 2 1 ISO Class 5 (Class 100) Spec-Wipe 7 Knitted polyester, sealed-edge ISO Class 3 (Class 1) Key: 1 = Excellent 2 = Good 3 = Fair potentially can be released from a wiper subjected to mechanical stress. A wiper is agitated in 600 ml of filtered, deionized water. An aliquot of this liquid is filtered through a membrane and the fibers are counted microscopically. Extractables: The preferred method for determining the relative purity of cleanroom wipers is by measuring extractables. The method used for VWR Spec-Wipe wipers entails the immersion of the wiper in solvent for five minutes. The solution is then filtered and evaporated, yielding a nonvolatile residue (NVR). This procedure is done twice using fresh solvent each time. Data is generated using two different solvents: deionized water and 2-Propanol (IPA). 3. How will the wiper be evaluated? Probably the most difficult aspect of wiper selection is evaluating the wiper objectively using accurate, reproducible methods. VWR Spec-Wipe wipers are evaluated using IEST methodology. Metallic Ions: VWR Spec-Wipe wipers are analyzed for the ions critical to cleanroom environments. These ions are identified and quantified by ion chromatography. 2. How will the wiper be used? Will it be used for cleaning with a solvent? As an absorbent blotter for spills? Sorbency is an important factor in determining whether a wiper is considered a success in an application. Extrinsic Absorbency: The total quantity of liquid the fabric will hold. Wipers can also be used as polishing cloths, to apply disinfectants, to remove excess adhesives, and to prepare surfaces for manufacturing. Your VWR Sales Representative will be able to assist you in determining which VWR Spec- Wipe product is best for your application. 3
4 VWR Spec-Wipe 3e Wipers (46% Polyester/54% Cellulose, Creped, Nonwoven) Hydroentangled without the use of chemicals: Reduces ionic contamination Hydroentangled: Yields a durable wiper which produces less particulation than some other nonwoven methods Lightweight polyester/cellulose combination: Economical and sorbent Creped fabric: Provides improved softness and bulk VWR Spec-Wipe 3 Wipers (45% Polyester/55% Cellulose Nonwoven) Hydroentangled without the use of chemicals: Reduces ionic contamination Hydroentangled: Yields a durable wiper which produces less particulation than some other nonwoven methods Polyester/Cellulose combination: Provides good absorbency paired with excellent strength VWR Spec-Wipe 3 Wipers (Presaturated, Nonwoven Cleanroom) Available presaturated with 70% IPA/30% DI Water Packaged in resealable pouches: Maintains integrity of product, preserves cleanliness, and saturation levels Presaturated wipers: Eliminate squeeze bottles and in-house blending of chemicals; reduce solvent usage and hazardous waste; apply consistent amount of solvent, allowing for standardization of process Cleaning of surfaces and laminar flow benches Absorbing spills of H 2O and most common solvents Cleaning process tools and other equipment Cleaning quartzware Appropriate for use in Electronic, Biotechnology, Industrial (Chemical and Petroleum, Aerospace, Environmental), Lab Animal Health, Government, CRO/Clinical, Spec-Wipe 3e Lightweight Creped Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case Spec-Wipe 3e Lightweight Creped Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 150/Bag, 20 Bags/Case Spec-Wipe 3 Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case Spec-Wipe 3 Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 150/Bag, 20 Bags/Case Spec-Wipe 3 Poly/Cellulose Nonwoven, 70% IPA/30% DI Water 23 x 23 (9 x 9) 75/Bag, 12 Bags/Case VWR Spec-Wipe 3 Sterile Wipers (45% Polyester/55% Cellulose, Nonwoven) Sterilized by gamma radiation to a Sterility Assurance Level (SAL) of 10-6 in accordance with ANSI/ AAMI/ISO 11137:2006 guidelines Hydroentangled without the use of chemicals: Reduces ionic contamination Hydroentangled: Yields a durable wipe that produces less particulation than some other nonwoven methods Polyester/Cellulose combination: Good absorbency with excellent strength Outer bag: Allows for easy opening Aseptic processing zones Cleaning or disinfecting workstation surfaces Cleaning or disinfecting processing equipment Cleaning of surfaces and laminar flow benches Absorbing spills of H 2O and most common disinfectants Appropriate for use in Biotechnology, Lab Animal Health, Government, CRO/Clinical, Description Size Packaging Cat. No. Spec-Wipe 3 Sterile Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 20/Inner Bag, 5 Inner Bags/Outer Bag, 5 Outer Bags/Case
5 VWR Spec-Wipe Wipers for Cleanrooms & Other Controlled Environments VWR Spec-Wipe 4 Wipers (100% No-Run Interlock, Knitted Polyester) 100% polyester: Extremely low particle generation; will not break down with use Cleanroom laundered: Creates a soft wiper for delicate surfaces Laundered in an ISO Class 4 (Class 10) cleanroom laundry: Reduces particulate ion and extractable contamination No-run interlock knit: Provides a very durable wiper for rigorous cleaning Clean-cut edges: Less lint and fiber to particulate VWR Spec-Wipe 4 Cleanroom Wipers (Presaturated, 100% No-Run Interlock, Knitted Polyester) Available in 70% IPA/30% DI Water blend Packaged in resealable pouches: Maintains integrity of product, preserves cleanliness, and saturation levels Folded wipers: Ready to use right from the package; no additional handling needed Presaturated wipers: Eliminate squeeze bottles and in-house blending of chemicals; reduce solvent usage and hazardous waste; consistent amount of solvent, allowing for standardization of process 100% polyester: Extremely low particle generation; will not break down with use No-run interlock knit: Provides a very durable wiper for rigorous cleaning Appropriate for use in Electronic, Biotechnology, Industrial (Chemical and Petroleum, Aerospace, Environmental), Lab Animal Health, Government, CRO/Clinical, Excellent for cleaning rough, abrasive, or irregular surfaces Soft enough for delicate surfaces Cleaning where low particle contamination is most critical General equipment cleaning Spec-Wipe 4 Knitted Polyester 23 x 23 (9 x 9) 150/Bag, 8 Bags/Case Spec-Wipe 4 Knitted Polyester, 70% IPA/30% DI Water 23 x 23 (9 x 9) 30/Bag, 12 Bags/Case VWR Spec-Wipe 4 Sterile Wipers (100% No-Run Interlock, Knitted Polyester) Sterilized by gamma radiation to a Sterility Assurance Level (SAL) of 10-6 in accordance with ANSI/AAMI/ISO 11137:2006 guidelines 100% polyester: Extremely low particle generation; will not break down with use Cleanroom laundered: Creates a soft wiper for delicate surfaces Laundered in an ISO Class 4 (Class 10) cleanroom laundry: Reduces particulate ion and extractable contamination No-run interlock knit: Provides a very durable wiper for rigorous cleaning Clean-cut edges: Less lint and fiber to particulate Outer bag: Allows for easy opening Linear-tear inner bag: Allows for easy access to wipers Validated sterile: Provides sterility assurance for proper GMP compliance Aseptic processing zones Cleaning or disinfecting workstation surfaces and processing equipment Cleaning of surfaces and laminar flow benches Absorbing spills of H 2O and most common disinfectants Excellent for cleaning rough, abrasive, or irregular surfaces Soft enough for delicate surfaces Cleaning where low particle contamination is most critical Appropriate for use in Biotechnology, Lab Animal Health, Government, CRO/Clinical, Spec-Wipe 4 Sterile Knitted Polyester 30 x 30 (12 x 12) 20/Inner Bag, 5 Inner Bags/Outer Bag, 3 Outer Bags/Case
6 VWR Spec-Wipe 5 Wipers (Treated, 45% Polyester/55% Cellulose, Nonwoven) Hydroentangled: Yields a durable wiper that produces less particulation than many other nonwovens Polyester/Cellulose combination: Good absorbency with excellent strength Proprietary surface treatment: Reduces particulation Cleaning of surfaces and laminar flow benches Absorbing spills of H 2O and most common solvents General all-purpose cleaning Appropriate for use in Electronic, Biotechnology, Industrial (Chemical and Petroleum, Aerospace, Environmental), Lab Animal Health, Government, CRO/Clinical, Spec-Wipe 5 Treated Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case VWR Spec-Wipe 7 Wipers (100% No-Run Interlock Knit, Sealed-Edge, Knitted Polyester) 100% polyester: Extremely low particle generation; fibers will not break down with use Cleanroom laundered: Creates a soft wiper for delicate surfaces Laundered in an ISO Class 4 (Class 10) cleanroom laundry: Further reduces particulate ion and extractable contamination No-run interlock knit: Provides a very durable wiper for rigorous cleaning Laser cut sealed edges: Less lint and fiber to particulate Excellent for cleaning rough, abrasive, or irregular surfaces Soft enough for delicate surfaces Cleaning where low particle contamination is most critical General equipment cleaning Appropriate for use in Electronic, Semiconductor, Pharmaceutical, Medical Device, Biotechnology, Industrial (Chemical and Petroleum, Aerospace, Environmental), Lab Animal Health, Government, CRO/ Clinical, Research, and Education industries. Spec-Wipe 7 Sealed-Edge Knitted Polyester 23 x 23 (9 x 9) 100/Bag, 8 Bags/Case Spec-Wipe 7 Sealed-Edge Knitted Polyester 30 x 30 (12 x 12) 100/Bag, 6 Bags/Case
7 VWR Spec-Wipe Wipers for Cleanrooms & Other Controlled Environments Ordering Information Dry Wipers Spec-Wipe 3e Lightweight Creped Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case Spec-Wipe 3e Lightweight Creped Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 150/Bag, 20 Bags/Case Spec-Wipe 3 Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case Spec-Wipe 3 Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 150/Bag, 20 Bags/Case Spec-Wipe 4 Knitted Polyester 23 x 23 (9 x 9) 150/Bag, 8 Bags/Case Spec-Wipe 5 Treated Poly/Cellulose Nonwoven 23 x 23 (9 x 9) 300/Bag, 20 Bags/Case Spec-Wipe 7 Sealed-Edge Knitted Polyester 23 x 23 (9 x 9) 100/Bag, 8 Bags/Case Spec-Wipe 7 Sealed-Edge Knitted Polyester 30 x 30 (12 x 12) 100/Bag, 6 Bags/Case Sterile Wipers Spec-Wipe 3 Sterile Poly/Cellulose Nonwoven 30 x 30 (12 x 12) 20/Inner Bag, 5 Inner Bags/Outer Bag, 5 Outer Bags/Case Spec-Wipe 4 Sterile Knitted Polyester 30 x 30 (12 x 12) 20/Inner Bag, 5 Inner Bags/Outer Bag, 3 Outer Bags/Case Presaturated Wipers Spec-Wipe 3 Poly/Cellulose Nonwoven, 70% IPA/30% DI Water 23 x 23 (9 x 9) 75/Bag, 12 Bags/Case Spec-Wipe 4 Knitted Polyester, 70% IPA/30% DI Water 23 x 23 (9 x 9) 30/Bag, 12 Bags/Case For typical properties and technical data, please visit 7
8 For information on VWR Controlled Environment Mops, contact your VWR Sales Representative or visit More mop head styles available: , Mop Head Frame Handle Mop Head Frame Handle Mop Head Frame Handle Mop Head Sterile Frame Handle Lit. No W
Cleaning. By the end of this chapter, you will be able to: Introduction. Definitions. Chapter 9
Chapter 9 By the end of this chapter, you will be able to: l Define the terms cleaning, decontamination, disinfection l List the factors that affect disinfection l Describe the aims of a cleaning schedule
Particle Release by Cleanroom Wipers
Working in a cleanroom environment not only requires the use of cleanroom consumable materials but also of special wipers. We refer to them here as cleanroom wipers. With these, particles as small as a
The Perfect Partnership for GMP Cleaning Services. Total Cleaning Solutions from Micronclean & Isocleanse
The Perfect Partnership for GMP Cleaning Services Total Cleaning Solutions from Micronclean & Isocleanse 02 03 The Micronclean Offer Micronclean have offered a specialist ISO Class 4/GMP Grade B cleanroom
Hazardous Drugs Spill Kit
Hazardous Drugs Spill Kit About the Joint Venture Baxter Pharmacy Services and CRG Healthcare have come together to produce the Hazardous Drugs Spill Kit Baxter Pharmacy Services Provides aseptically prepared
ATS-SOI-5910 Page: 1 of 7. Approval Block. Prepared by: Signature Date. Evan Parnell 04 AUG 2014. Reviewed by: Signature Date. Brian Flynn 04 AUG 2014
ATS-SOI-5910 Page: 1 of 7 Approval Block Prepared by: Signature Date Evan Parnell 04 AUG 2014 Reviewed by: Signature Date Brian Flynn 04 AUG 2014 Approved by: Signature Date Kristal Jewell 04 AUG 2014
Wipe Analysis to Determine Metal Contamination on Critical Surfaces
By Albert Dato, Ph.D., Warren York, Jennifer Jew, Laarni Huerta, Brice Norton, and Michael Coste On-wafer metallic contamination is detrimental to the fabrication and performance of semiconductor devices.
Contamination. Cleanroom. Cleanroom for micro and nano fabrication. Particle Contamination and Yield in Semiconductors.
Fe Particles Metallic contaminants Organic contaminants Surface roughness Au Particles SiO 2 or other thin films Contamination Na Cu Photoresist Interconnect Metal N, P Damages: Oxide breakdown, metal
ENVIRONMENTAL TESTING & MONITORING: Deciphering Compliance Requirements for Pharmaceutical and Medical Device Manufacturers A WHITE PAPER
A WHITE PAPER ENVIRONMENTAL TESTING & MONITORING: Deciphering Compliance Requirements for Pharmaceutical and Medical Device Manufacturers By Scott Mackin A WHITE PAPER ENVIRONMENTAL TESTING & MONITORING:
Archived. Gloves should be changed frequently during the analysis.
Introduction Gloves and laboratory coats Small tools Specific clean-up and housekeeping procedures are used to help protect evidence samples from conditions and agents that might serve to destroy, deteriorate,
Lecture 30: Cleanroom design and contamination control
Lecture 30: Cleanroom design and contamination control Contents 1 Introduction 1 2 Contaminant types 2 2.1 Particles.............................. 2 2.2 Metal ions............................. 4 2.3 Chemicals.............................
Sample Pharmacy CLEANING AND SANITIZING PROCEDURE P-304.1
P-304.1 1.0 Definition and Purpose: To standardize and define the process by which the controlled Cleanroom environments (ISO Class 5, 7, and 8) and the general pharmacy prep area is cleaned, disinfected,
Technical Spotlight. The Use of Ion Chromatography in the Printed Circuit Board Industry
The Use of Ion Chromatography in the Printed Circuit Board Industry Keith M Sellers Senior Scientist Trace Laboratories East 5 North Park Dr. Hunt Valley, MD 21030 (410) 584-9099 ksellers@tracelabs.com
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Page 1 of 6 (PPE) Personal protective equipment (PPE) is used to protect an individual from hazards associated with their work tasks or environment. Specific types of personal protective equipment include
Sterile Cleanroom Management
Sterile Cleanroom Management Lynn Stanard, Sr. Quality Manager, Berkshire Corporation When manufacturing in an aseptic environment, it is critical to ensure that the various cleanroom consumables, such
Safety in the EXSS Cleanroom. May 2016
Safety in the EXSS Cleanroom May 2016 Code of Practice All Cleanroom operating procedures & safety protocols are contained in the Code of Practice (CoP) You must read the CoP & have signed the Declaration
STANDARD OPERATING PROCEDURES SPILL RESPONSE AND CLEAN-UP OUTSIDE BIOSAFETY CABINET
BIOLOGICAL SPILL KIT IN A 5 GALLON BUCKET WITH LID Spill response and cleanup procedures (SOP) 1 Notepad 1 Pen 6 Business cards 1 Permanent marker 1 trash bag 6 Biohazard stickers 1 roll duct tape 1 roll
Assembly and Installation Procedures
Assembly and Installation Procedures for Pall Pharmaceutical Grade Capsule Assemblies 1. Introduction The following procedures must be followed for the installation of Pall pharmaceutical grade capsule
PHARMACEUTICAL TECHNOLOGY. Cleaning Aseptic Fill Areas. February 1996. Douglas W. Cooper, Texwipe
PHARMACEUTICAL TECHNOLOGY February 1996 Cleaning Aseptic Fill Areas Douglas W. Cooper, Texwipe For pharmaceuticals that cannot be given terminal sterilization at the end of production, the alternative
Secure, clean. & economical. 3M Occupational Health & Environmental Safety Division. Sorbents
3M Occupational Health & Environmental Safety Division Sorbents Take your safety personally Secure, clean & economical 3M Sorbents can be used in a wide variety of applications ranging from simple maintenance
ASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations
Carry out and complete clean-room cleaning Overview 1 Carry out clean-room 2 Remove and store equipment, tools and materials after clean-room 3 Remove and dispose of contaminated material after clean-room
PREVENTIVE MAINTENANCE OF FIBER OPTIC CABLES AND OPTICS
PREVENTIVE MAINTENANCE OF FIBER OPTIC CABLES AND OPTICS The end of a fiber optic cable and the inner surface of an optical module lens constitute optical surfaces that should be properly cleaned and maintained
INTEGRATING COMPLIANCE, CLEANLINESS, AND SAFETY IN CONTROLLED ENVIRONMENTS CONTROLLED ENVIRONMENTS MANAGEMENT SERVICES
INTEGRATING COMPLIANCE, CLEANLINESS, AND SAFETY IN CONTROLLED ENVIRONMENTS CONTROLLED ENVIRONMENTS MANAGEMENT SERVICES Because Clean is Critical Technological advancement, rapid change, and high quality
THE BASICS OF PACKAGING
THE BASICS OF PACKAGING Objectives: Review the regulatory requirements for packaging Present the purpose, function and essential characteristics of packaging Describe packaging options, their use, and
Liquid II Cell Culture Media Manufacturing Plant. Overview Facilities Water for Injection Sterile Environment Media Handling Cleanroom Interior
Liquid II Cell Culture Media Manufacturing Plant Overview Facilities Water for Injection Sterile Environment Media Handling Cleanroom Interior Overview History of BioConcept and Amimed BioConcept has close
CONTROLLING CROSS INFECTION IN THE DENTAL LABORATORY. Best Practice Guide
CONTROLLING CROSS INFECTION IN THE DENTAL LABORATORY Best Practice Guide Preparing to Work A separate work area shall be set aside in the laboratory to receive all incoming work. This should ideally be
Safety, Cleaning, and Chemical Disposal Procedures
Safety, Cleaning, and Chemical Disposal Procedures 1. Using Acids At many points in the fabrication process strong acids are used as etchants. These cause severe burns if kept in contact with your skin
Carnegie Mellon University s Policy and Procedures for Recombinant and Synthetic Nucleic Acid Materials Spills
Carnegie Mellon University s Policy and Procedures for Recombinant and Synthetic Nucleic Acid Materials Spills Background In accordance with Section IV-B-2-b-(6) of the NIH Guidelines for Research Involving
Standard Operating Procedure for Cleaning Nylon Filters Used for the Collection of PM 2. 5 Material
PM 2.5 Nylon Filter Cleaning Date: August 25,2009 Page I of8 Standard Operating Procedure for Cleaning Nylon Filters Used for the Collection of PM 2. 5 Material Environmental and Industrial Sciences Division
Mississauga Halton/Central West Regional Cancer Program Contact Us Put contact sticker here Chemotherapy Spil or Leak Handling Instructions for Home
Mississauga Halton/Central West Regional Cancer Program Contact Us Put contact sticker here Chemotherapy Spill or Leak Handling Instructions for Home Introduction: Notes You have been given a Chemo Spill
Cleaning and Disinfection Agenda. 1. Cleanroom Classification. Cleanroom Classification. What does contamination mean? Types of contamination
Cleaning and Disinfection Agenda CLEANING AND DISINFECTION TECHNIQUES Barbara Wessels Key Account Manager Ecolab Contamination Control October 2014 1. Cleanroom classification and definition 2. Sources
CI/SfB (31.5) Xn (U46) 07/05. A complete range of
CI/SfB (31.5) Xn (U46) 07/05 A complete range of Hygienic GRP Doors Applications: Pharmaceutical Facilities Food Industries Hospitals/Health Care Sector Retail Leisure Industry Manufacturing Education
A Basic Introduction to Clean Rooms
A Basic Introduction to Clean Rooms A cleanroom is a controlled environment where products are manufactured. It is a room in which the concentration of airborne particles is controlled to specified limits.
Ice Cream Lab & Application Questions
Deep Freeze 1 Ice Cream Lab & Application Questions Name: Period: Date: Overview Have you ever wondered what it is about throwing salt on ice that makes it melt? And just why does it melt? Where does the
Mopping Systems for Critical Environments Mission-critical cleaning and contamination control. www.contecinc.com
Mopping Systems for Critical Environments Mission-critical cleaning and contamination control www.contecinc.com Contec is a leading manufacturer of contamination control products for critical cleaning
Autoclave Safety. Autoclaves are sterilizers using high pressure and high temperature steam. The potential safety risks for the operators are:
Autoclave Safety Purpose: Sterilization refers to the complete killing of all living organisms, including spores. Common sterilization techniques include the application of wet heat, dry heat, chemicals,
Chemotherapy Spill Response:
Chemotherapy Spill Response: Antineoplastic Spills Outside Of A Fume Hood Lisa Hudley, RN Training Coordinator Safety & Environmental Compliance William Guess Director Safety & Environmental Compliance
Best Practices for Handling Nanomaterials in Laboratories
Best Practices for Handling Nanomaterials in Laboratories Much of the toxicology of nanomaterials is currently uncertain or unknown. Some nanosized particles are more toxic than their respective micron
CRITICAL FLUID MANAGEMENT FLUOROPURE TRILAYER HDPE DRUMS
CRITICAL FLUID MANAGEMENT FLUOROPURE TRILAYER HDPE DRUMS High purity transport technology CRITICAL FLUID MANAGEMENT Safe, high purity chemical transport Entegris is a worldwide leader in providing high
How single-use connections advance aseptic processing: Increased process flexibility and reliability, reduced costs
WHITE PAPER 7004 How single-use connections advance aseptic processing: Increased process flexibility and reliability, reduced costs By John Boehm Business Unit Manager Colder Products Company Today s
ABOUT RAMER INFORMATION PACK WWW. PVAFOAMSPONGE.COM. Ramer Ltd is a leading manufacturer sponge products based in the UK.
ABOUT RAMER Ramer Ltd is a leading manufacturer sponge products based in the UK. The Ramer name is famous for our retail Ramer Sponges and associated bathing products, and was the first to develop a plastic
TESTIMONIAL: Congratulations! Our company s EID Incoming Inspection of AMRESCO-provided products
custom solutions With markets changing so rapidly, AMRESCO is on the front line bringing new technologies and processes so we can deliver solutions that solve our customers problems. TESTIMONIAL: Congratulations!
1.4 Metallic Impurities Iron must not exceed 150 ppm and copper shall not exceed 6 ppm when tested according to TAPPI T 266.
Library of Congress Preservation Directorate Specification Number 100 132 09 Specifications for 3 x 10ʺ Paper Enclosures For the Storage of Strip Photographic Negatives This specification is provided as
Recommendations for the Safe Use of Handling of Cytotoxic Drugs
Recommendations for the Safe Use of Handling of Cytotoxic Drugs Introduction Cytotoxic drugs are toxic compounds and are known to have carcinogenic, mutagenic and/or teratogenic potential. With direct
SPILLS & SPILL KITS. Spills -General Guidelines:
Spills -General Guidelines: If handled properly, a spill may be nothing more than a nuisance. If handled improperly, a spill can seriously disrupt your activities and the work of your colleagues. At worst,
finished goods warehousing available, Northern Labs is capable of handling projects of all sizes.
Northern Labs has the focus, production volume and resources to deliver highly cost-efficient manufacturing for your Northern liquid filling Labs needs. has the focus, production volume and resources to
Decontamination and Waste Management www.biosecurity.sandia.gov
Decontamination and Waste Management www.biosecurity.sandia.gov SAND No. 2006-3684C Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States
Biological Safety Program
Risk Management & Safety Main Office, Wyoming Hall Phone: (307) 766-3277 Fax: (307)766-6116 Regulated Materials Management Center Phone: (307)766-3696 Fax: (307)766-3699 Web: www.uwyo.edu/ehs Email: UWEHS@uwyo.edu
Cleaning validation of cleanrooms and preparation equipments
Cleaning validation of cleanrooms and preparation equipments Head of production Central Pharmacy, Geneva University Hospitals EAHP Foundation Seminar: Patient Safety; More About Compounding" 23-25 May,
Risk Assessment: Biosafety Cabinet
Risk Assessment: Biosafety Cabinet Biosafety cabinets (BSCs) serve as primary containment devices for operations involving potential splashes, spills or aerosolization of hazardous biological materials.
GMP ANNEX 1 REVISION 2008, INTERPRETATION OF MOST IMPORTANT CHANGES FOR THE MANUFACTURE OF STERILE MEDICINAL PRODUCTS
PHARMACEUTICAL INSPECTION CONVENTION PHARMACEUTICAL INSPECTION CO-OPERATION SCHEME PI 032-2 8 January 2010 RECOMMENDATION GMP ANNEX 1 REVISION 2008, INTERPRETATION OF MOST IMPORTANT CHANGES FOR THE MANUFACTURE
Guidelines for the Management of Spillage of Cytotoxic Drugs. No changes have been made as evidence base remains current.
Guidelines for the Management of Spillage of Cytotoxic Drugs Date Approved by Network Governance May 2012 Date for Review May 2015 Changes Between Versions 3.0 and 4.0 No changes have been made as evidence
Environmental Monitoring
Chapter 10 Environmental Monitoring By the end of this chapter, you will be able to: l List the types of environmental testing l Name three types of checks that are carried out to ensure the isolator is
Laminar Flow Cabinets
Laminar Flow Cabinets The World s Most Practical Selection of Benchtop Laminar Flow Cabinets. 24 36 48 Simple, Effective Protection for Samples and Work Processes, Uncompromised Performance, Economical
OESO Ergonomics Division...919-668-ERGO(3746) Duke Police...919-684-2444 Corporate Risk Management... 919-684-6226
Musculoskeletal Disorders (MSDs) Develop over time and can take a long time to heal Can be quite painful and reduce overall effectiveness and efficiency Occur in any part of the body A variety of risk
Stainless Steel Worksurface 3 Feet Hood A10-WS-PR3 A10-WS-SR3 4 Feet Hood A10-WS-PR4 A10-WS-SR4 6 Feet Hood A10-WS-PR6 A10-WS-SR6.
Product Sampler #1 Laminar Flow Hoods / Laminar Flow Cabinets: 1- Benchtop Vertical Laminar Flow Hoods- Air Recirculation Available s: Clean Bench Class 100 Bench-top Vertical Laminar Flow Hoods with Air-recirculation
Liquids Suspensions Gels
Liquids Suspensions Gels EMCM: your product development and manufacturing partner Centre of excellence European Medical Contract Manufacturing (EMCM) is the centre of excellence in developing and manufacturing
ISO 21501 A Standard Methodology to Optical Particle Counter Calibration and What It Means to Cleanroom Owners
ISO 21501 A Standard Methodology to Optical Particle Counter Calibration and What It Means to Cleanroom Owners Tony Harrison and Bob Latimer ISO 21501- A Standard Methodology to Optical Particle Counter
Table of Contents Markers...1
Table of Contents Markers...1 Introduction...1 Color Surge Paper...2 Color Surge\Neon Explosion/Glow Board/Color Wave Markers...3 Dry Erase Markers...9 Erasable Markers...15 Ice Markers...23 Markers...34
File: Spill Response Plan for Hazard Chemicals and Mercury Spills. Orig. Date: 12/01/2005 Review Date: January Review Date: March 2010
File: Spill Response Plan for Hazard Chemicals and Mercury Spills Orig. Date: 12/01/2005 Review Date: January Review Date: March 2010 OSHA: 1910.120 EPA: 40CFR 112.7 Messiah College Spill Response Policy
Oil Analysis. It is important that the sampling be done in the following manner: 1.
Oil Analysis Introduction Oil analysis was originally used by the military and the railroad as a preventative maintenance program. It has expanded today to the fi eld of study called Tribology. Oil analysis
Sample preparation for X-ray fluorescence analysis
Technical articles Sample preparation for X-ray fluorescence analysis III. Pressed and loose powder methods Gakuto Takahashi* 1. Introduction There are two main sample preparation techniques for measurement
Laminar Flow Cabinets and Workstations
VERTICAL AND HORIZONTAL HEPA FILTERED SYSTEMS FOR PROCESS OR OPERATOR PROTECTION Laminar Flow Cabinets and Workstations For procedures requiring protection from particulate contamination and for aseptic
Understanding USP 797
DDK Scientific, Corp. Raul Duarte June 2008 Copyright DDK Scientific, Corp. 2008, 2009 DDK Scientific, Corp. Proprietary The purpose of USP 797 is to prevent harm and fatality to patients that could result
The following assumptions are to be considered when reviewing this model procedure:
Transportation Emergency Preparedness Program (TEPP) Model Procedure for Properly Handling and Packaging Potentially Radiologically Contaminated Patients This Transportation Emergency Preparedness Program
Regulations Concerning
Regulations Concerning Airborne Particle Counting Two types of activities performed with an airborne particle counter: Classification focuses primarily on the environment Particle Counting Applications
Biohazardous, Medical & Biological Waste Guidance Chart
CSULA Environmental Health and Safety Biohazardous, Medical & Biological Waste Guidance Chart The chart below provides information on how to handle most, if not all, of the items that frequently are collectively
experiment5 Understanding and applying the concept of limiting reagents. Learning how to perform a vacuum filtration.
81 experiment5 LECTURE AND LAB SKILLS EMPHASIZED Synthesizing an organic substance. Understanding and applying the concept of limiting reagents. Determining percent yield. Learning how to perform a vacuum
February 2010. Xerox 8265/8290 Color Wide Format Printer User Maintenance and Cleaning Guide
February 2010 Xerox 8265/8290 Color Wide Format Printer User Maintenance and Cleaning Guide 2010 Xerox Corporation. All rights reserved. Xerox and the sphere of connectivity design and all product names
Protease Peptide Microarrays Ready-to-use microarrays for protease profiling
Protocol Protease Peptide Microarrays Ready-to-use microarrays for protease profiling Contact us: InfoLine: +49-30-97893-117 Order per fax: +49-30-97893-299 Or e-mail: peptide@jpt.com www: www.jpt.com
BODILY FLUID CLEAN UP PROCEDURES
Page 1: Supplies / Preparation & Safety Page 2: Debris / Minor Spills Page 3: Major Spills on Tile Page 4: Major Spills on Carpet Page 5: Proper Glove Removal / Hand Washing Supplies to Use: For All spills
Coating and Extraction of Honeycomb Denuders
QSM Approval: Coating and Extraction of Honeycomb Denuders 1 INTRODUCTION 1.1 The following procedures are used for the coating of honeycomb denuders with citric acid and sodium carbonate solutions, and
Particle Monitoring Requirements in Pharmaceutical Cleanrooms
Particle Monitoring Requirements in Pharmaceutical Cleanrooms All drugs must be manufactured in accordance with the current Good Manufacturing Practice (cgmp) regulations. Pharmaceutical manufacturers
Environmental Monitoring of Clean Rooms
Environmental Monitoring of Raul Duarte President DDK Scientific, Corp. Copyright DDK Scientific, Corp. 2008, 2009, DDK Scientific, Corp. Proprietary A manufacturing facility for pharmaceutical products
Spill Response Procedures & Sorbent Materials
Spill Response Procedures & Sorbent Materials Document Number: 146 Introduction Emergency spill response is an important part of a company's safety and health program. In the event of a spill, well-prepared
ph Measurement and Control
ph Measurement and Control Tech Tip #14 1997 I. The Need for ph II. ph System Requirements III. ph Electrode Conditioning Procedures IV. How the electrode works V. Identifying the Electrode Components
LYRASIS DISASTER RECOVERY REQUEST FOR QUALIFICATIONS
LYRASIS DISASTER RECOVERY REQUEST FOR QUALIFICATIONS Completed qualifications may be sent to Robin Dale (robin.dale@lyrasis.org) Director, Digital and Preservation Services 1438 West Peachtree Street,
Heat Transfer. Condensation. Revaporization
Objectives Wrapping a Towel Around the Problem of Wet Packs Identify causes of wet packs in steam sterilization Review suggested documentation that can assist in solving wet pack problems Why are Wet Packs
The Industry s Best Overall Value. Mop Basics
Mop Basics 2012 Who Knew Mops Could Be So Complicated? The Basics The Choices The Advantages 2012 Confidential & Proprietary Size - Today s Market Challenge No industry-wide uniformity Price v Value 2012
Policies. Prep Room Policies
Introduction INTRODUCTION The Microbiology Prep Room is located in 531A Life Sciences Building. The telephone number is 372-8609. It is open from 7:30 a.m. to 4:30 p.m. during the fall and spring semesters.
Environmental Monitoring
Environmental Monitoring Purpose of Environmental Monitoring Critical process within the pharmaceutical and biotechnology industries. Determines the microbial and particulate content of cleanroom air and
Particularly Hazardous Substances (PHS) Standard Operating Procedure (SOP)
Particularly Hazardous Substances (PHS) Standard Operating Procedure (SOP) Formaldehyde, formalin, paraformaldehyde solutions, and paraformaldehyde solids Principal Investigator: Room & Building #: Department:
OVERVIEW OF CONSULTING AND AUDITING PROJECTS
OVERVIEW OF CONSULTING AND AUDITING PROJECTS AEROSPACE & AUTOMOTIVE Aircraft Propellers - The buildup of static electricity on propeller blades was a concern. SOLUTION: Materials were tested at ETS and
Cleaning Instruction for Laser 08582.00
Page 0 Title of Document: Cleaning Instruction for Laser Document Number: Revision: A Date first revision: Date of this revision: 07.09.2004 Prepared Kai Wissner Date: 07.09.2004 Approved Dr. Carsten Hampe
PAPER CHROMATOGRAPHY
PAPER CHROMATOGRAPHY INTRODUCTION Chromatography is a technique that is used to separate and to identify components of a mixture. This analytical technique has a wide range of applications in the real
The following standard practices, safety equipment, and facility requirements apply to BSL-1:
Section IV Laboratory Biosafety Level Criteria The essential elements of the four biosafety levels for activities involving infectious microorganisms and laboratory animals are summarized in Table 1 of
CASTLEHEAD MEDICAL CENTRE JOB DESCRIPTION
CASTLEHEAD MEDICAL CENTRE JOB DESCRIPTION JOB TITLE: REPORTS TO: HOURS: CLEANER PRACTICE MANAGER 10 hours per week Job Summary: To keep the Surgery in a safe, clean and orderly manner. Job responsibilities:
Allergen Removal Testing on ESCO Jetstream Air Shower JAS-1B8-030 by Dian Susanti and Alexander Atmadi
Allergen Removal Testing on ESCO Jetstream Air Shower JAS-1B8-030 by Dian Susanti and Alexander Atmadi Introduction Laboratory animal allergy is one of the most common occupational health hazards in laboratory
Dispersion of Synthetic Fibers in Wet-Lay Nonwovens
Dispersion of Synthetic Fibers in Wet-Lay Nonwovens This article was written by James M. Keith, retired Director of Technical Services for MiniFIBERS, and published in the Tappi Journal, Vol. 77, No. 6,
CARPET CARE PROGRAM. Dustbane Products Limited
CARPET CARE PROGRAM Dustbane Products Limited Sick Building Syndrome Carpets and Mats play a major role with respect to indoor air quality and have come under increased attack for contributing to Sick
Beware that ordinary prescription glasses do not provide adequate protection. This is also true with poorly fitting safety glasses.
Ethidium Bromide Introduction Ethidium bromide (EtBr) is widely used for visualization of nucleic acids in electrophoretic gels. EtBr forms fluorescent complexes, by intercalation of DNA, which are readily
DIRECT PRINTING NYLON JACKETS. The Basics
DIRECT PRINTING NYLON JACKETS The Basics . The Nylon Jacket Types of Nylon There are three basic weaves that are commonly used to manufacture nylon jackets or outerwear. These are Taffeta, Satin and Oxford.
Biosafety Level 2 Criteria
Biosafety Level 2 Criteria Biosafety in Microbiological and Biomedical Laboratories (BMBL) 5th Edition Biosafety Level 2 (BSL-2): Biosafety Level 2 builds upon BSL-1. BSL-2 is suitable for work involving
Sterile operation scenarios at GSK-Parma
Sterile operation scenarios at GSK-Parma R.Cassaniti, N.Trivelli, M.Bini - GSK manufacturing S.p.A. Dexterous Manipulation in hazardous areas workshop- Lyon 21/3/2013 Property of GlaxoSmithKline GSK-Glaxo
Paper Chromatography: Separation and Identification of Five Metal Cations
Paper Chromatography: Separation and Identification of Five Metal Cations Objectives Known and unknown solutions of the metal ions Ag +, Fe 3+, Co 2+, Cu 2+ and Hg 2+ will be analyzed using paper chromatography.
Raleigh, NC May 12 th & 13 th 2016. Meeting The New ISO Cleanroom Standards And Changing EU Guidance How Will You Comply?
Raleigh, NC May 12 th & 13 th 2016 Meeting The New ISO Cleanroom Standards And Changing EU Guidance How Will You Comply? The International Cleanroom Standards (ISO 14644-1 & 2) have been updated, these
Selection of Disinfectants for Use in the Pharmaceutical Industry. Tim Sandle Head of Microbiology Bio Products Laboratory
Selection of Disinfectants for Use in the Pharmaceutical Industry Tim Sandle Head of Microbiology Bio Products Laboratory Introduction Cleaning and disinfection of surfaces are essential steps for maintaining
Technical Synopsis of Plasma Surface Treatments
Technical Synopsis of Plasma Surface Treatments Wesley Taylor Advisor: Dr. Bruce Welt University of Florida, Gainesville, FL December, 2009 Abstract Surface treatment technology delves into some of the
Fiber Analysis 2005, 2004, 2003, 2001, 1999 by David A. Katz. All rights reserved.
Fiber Analysis 2005, 2004, 2003, 2001, 1999 by David A. Katz. All rights reserved. Fiber evidence can be found at crime scenes in a number of different ways. In personal contact between the clothing of
DYES AND DYEING 2003 by David A. Katz. All rights reserved. Permission for classroom use provided original copyright is included.
DYES AND DYEING 2003 by David A. Katz. All rights reserved. Permission for classroom use provided original copyright is included. Dyeing of textiles has been practiced for thousands of years with the first
THE TEKNEK DCR ROLLERS AND PADS
DCR ROLLERS AND PADS DCR ROLLERS AND PADS The powerful combination of Teknek polymer rollers and Teknek adhesive Pads combine to create the Worlds most efficient hand operated contact cleaning system.