Electric Motors. Electric Motors

Transcription

1 Basic Specifications and -2 Three Phase TFC General Purpose Motors -3 to -5 Single Phase TFC General Purpose Motors -6 SyMax Permanent Magnet AC Motors -6 Totally nclosed Brakemotors -7 PowerWash XT Washdown Motors -8 PowerWash SXT Stainless Steel Motors Inverter Duty Motors -10 Permanent Magnet DC Motors -11 Motor Dimensions Table -12 lectric Motors MAIL: -1

2 Performance matched to Hub City gear drives. Basic Specifications Power Ratings from 1/4 to 50 hp 1.15 Service Factor Operating Speed 1750 rpm Single Phase or Three Phase Design Standard Motors Produced by Regal Beloit for High fficiency, Reliability and Durability Ball Bearings for ndurance and Strength Totally nclosed General Purpose Motors Feature Steel Frames Brake Motors Feature Stearns Brakes, Bolt-On Removable Bases Washdown Motors Feature USDA Approved White poxy Paint, 303 Stainless Steel Shafts, Internal Corrosion Resistant Coatings and Class F Insulation System Inverter Duty Motors Feature ncoder and Brake Provisions, Class F Insulation System, and Three Year Warranty DC Motors Feature Oversized Brushes for Long Life, Class F Insulation System, and Two Year Warranty. Optional Adjustable Speed Motor Controls Available Modified Standard and Custom Designs CleanLine Washdown and BISSC Configurations Unique or Harsh nvironment Adaptations Motor/Gear Drive Package Incentives Available, Consult Factory DON T S TH MOTOR YOU ND? CONTACT HUB CITY. MANY MOR STOCK MOTORS AVAILABL. -2 CALL: (605) FAX: (605)

3 SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. Applications: General purpose use on gear reducers, pumps, machine tools, and other directcoupled equipment installed in damp, dusty, or dirty environments. Additionally, cast iron frame motors may be suitable for the process industries. : Ball bearings, mechanically locked on shaft end (excludes 5K models) Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted) 1.15 Service Factor (except as noted) Rolled steel T frame motors accept brake kits (except as noted) consult factory. C-FAC LSS 575 VOLT C-FAC LSS NOM. FF. lectric Motors 1/ /460 56C K / N,20,24,68 1/ /460 56C K / ,68,111 1/ /460 56C K / ,24 3/ /460 56C K / ,24, /460 56C K / ,24,68 1 1/ / TC C221A / / TC K / , / TC C223B / , / TC C / ,68 7 1/ / TC C225A / F,24, / TC C226A / F,24, / TC C227A / AL,F,24,68 13 F1 MOUNTING ONLY, CANNOT RASSMBL TO F SRVIC FACTOR SRVIC FACTOR 24 MOTOR WILL NOT ACCPT A BRAK KIT NOM. FF. 1/ C K / C K ,24,68 1/ C K ,24,68 3/ C K ,24, C K ,24 1 1/ TC C231A TC C232A SRVIC FACTOR SRVIC FACTOR General Purpose, Three Phase Totally nclosed, 1800 RPM CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. 68 RATD 60/50 HRTZ, 190/380 OR 380 VOLT AT NXT LOWR HORSPOWR SRVIC FACTOR F CLASS F INSULATION N TOTALLY NCLOSD, NON-VNTILATD AL ALUMINUM FRAM CONSTRUCTION CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. 24 MOTOR WILL NOT ACCPT A BRAK KIT 68 RATD 60/50 HRTZ, 190/380 OR 380 VOLT AT NXT LOWR HORSPOWR lectric Motors Application Guidelines Guidelines for Application General Purpose, Three Phase Motors on Variable Frequency Drives Meets NMA MG Part 30 and Part 31 Section NCLOSUR FFICINCY FRAM 10:1 VARIABL TORQU 2:1 C.T. MAXIMUM INVRTR TO MOTOR CABL 3KHZ CARRIR 230 V 460 V 575 V Totally nclosed Standard X 600 ft 125 ft 40 ft CONSULT FACTORY FOR GUIDLINS IN APPLYING XPLOSION PROOF MOTORS ON INVRTRS. CARRIR FRQUNCY IS MASURD PHAS-TO-PHAS, NOT PHAS-TO-BUS. HIGHR CARRIR FRQUNCIS RQUIR SHORTR CABL. CONSULT FACTORY FOR DTAILS. MAIL: hubsales@regalbeloit.com -3

4 General Purpose, Three Phase, 1800 RPM Globetrotter NMA Premium fficiency, Totally nclosed Meets or exceeds NMA Premium efficiencies NMA Premium models are in compliance with ISA2007 Cast iron frame and brackets Inverter Duty 10:1 Variable Torque and 10:1 Constant Torque, 1.0 SF (except as noted) 1.15 Service Factor Class F Insulation Standard assembly F1, reversible to F2 assembly UL Recognized, CSA Certified, C Mark Three year warranty SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. C-FAC D (RIGID BAS) CATALOG NOM. FF / TC GT / TC GT A 1 1/ / TC GT / TC GT A / TC GT / A TC GT A / TC GT / TC GT / TC GT / TC GT /2 230/ TC GT / TC GT / TC GT / TC GT / TC GT / TC GT / TC GT / / TC GT / YD / TC GT / YD / TC GT / YD / TC GT / YD / TC GT / YD / TC GT / YD / TC GT / YD CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. BLU SHADD ARAS AR CAST IRON FRAMS. A NMA DSIGN A YD 12 LADS FOR WY-DLTA, PART WINDING ON LOW VOLTAG, OR ACROSS-TH-LIN STARTING -4 CALL: (605) FAX: (605)

5 General Purpose, Three Phase, 1800 RPM Totally nclosed (Four in One) Ball bearings, mechanically locked on shaft end (excludes 5K models) 1.15 Service Factor (except as noted) Class F insulation (except as noted) Rated 60/50 hertz, 190/380 or 380 volt, at next lower horsepower (as noted) T frame motors, accept brake kits, see accessory kits Two year warranty on PAct (bold blue catalog numbers) Three year warranty on NMA Premium efficient (bold blue catalog numbers) Additional for Four-In-One Motors Only CR200 Corona resistant magnet wire Bolt-on, removable rigid base Suitable for horizontal and vertical mounting Will accept drip cover kits, see Accessories section SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. lectric Motors C-FAC D (RIGID AND RMOVABL BAS) 1/3 1/2 3/ / /2 10 FOUR IN-ON NOM. FF /460 56C YS G / N,6,13,24, C YS K N,6,13, /460 56C YS G / ,13, C YS K , /460 56C YS G / ,13, C YS K , /460 56HC YS G / ,6,13, HC YS K ,6, /460 56HC YS G / ,6,13, HC YS K ,6, /460 56HC YS G / ,6,13, HC YS K ,6, / TC YS C382B / ,13,24, TC YS C383B ,13,24 230/ TC YS C386B / ,24, TC YS C387B ,13,24, / TC YS C390A / ,24, TC YS C391A , / TC YS C393A / ,24, TC YS C394A ,24 CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. 5 56H, 143T, AND 145T COMBINATION BAS WITH 12 MOUNTING HOLS 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION 13 F1 MOUNTING ONLY, CANNOT RASSMBL TO F2 24 MOTOR WILL NOT ACCPT A BRAK KIT 68 RATD 60/50 HRTZ, 190/380 OR 380 VOLT AT NXT LOWR HORSPOWR N TOTALLY NCLOSD, NON-VNTILATD MAIL: hubsales@regalbeloit.com -5

6 General Purpose, Single Phase, 1800 RPM, Totally nclosed Ball bearings mechanically locked on shaft end (excludes 5K models) Heavy gauge steel constructions Suitable for horizontal or vertical mounting conomical split phase or capacitor start designs, as noted Service Factor, as noted C-FAC LSS OVR LOAD 1/ C NON H ,17,24 1/4 115/230 56C NON G / ,17,24 1/3 115/230 56C NON G / ,18,24 1/2 115/230 56C AUTO C / ,18,24 115/230 56C NON G / ,18,24 3/4 115/230 56C NON G / ,17, /230 56C NON G / ,17,24 1 1/2 115/ C NON G / S,1,18,24 1 CAPACITOR START/CAPACITOR RUN DSIGN FOR RDUCD AMPRAG 2 CAPACITOR START INDUCTION RUN DSIGN 3 SPLIT PHAS DSIGN SRVIC FACTOR SRVIC FACTOR 24 MOTOR WILL NOT ACCPT A BRAK KIT S NRGY SAVR DSIGN SyMax Permanent Magnet AC Motors, TNV & TFC Three Phase, 1800 RPM High power density, low weight design Provisions for optional BCP (Bearing Current Protection) Three year warranty Requires Drive for Operation Additional for Commercial, Rolled Steel Frame (NMA 56 frame models) Meets or exceeds NMA Premium (I3) Class F MAX GUARD insulation system Operational to 20:1 Constant Torque open-loop (1000:1 closed-loop) IP43 ingress protection (IP54 or IP55 available) Totally nclosed, Non-Ventilated Sealed ball bearing HP VOLTS NMA TORQU NOM. FRAM (LB-FT) FF. 1/2 230/460 56C 1.5 SY / N 1 230/460 56C 2.9 SY / N 1 1/2 230/460 56C 4.4 SY / N 2 230/460 56C 5.8 SY / N TC 8.8 SY TC 14.6 SY TC 21.9 SY TC 29.2 SY TC 43.8 SY TC 58.3 SY TC 72.9 SY TC 87.5 SY Additional for Industrial, Cast Iron frame (NMA T frame models) Ultra fficient Premium-Plus exceeds NMA Premium (I4) Class H MAX GUARD insulation system Cast iron construction for rigidity & reduced vibration IP54 ingress protection (IP55 or IP56 available) Premium Severe Duty, TFC Normally closed thermostats (one per phase, Class F) UL, CSA and C Optional terminal block shown N TOTALLY NCLOSD, NON-VNTILATD CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. BLU SHADD ARAS AR CAST IRON FRAMS. -6 CALL: (605) FAX: (605)

7 Brake Motors Single Phase, 1800 RPM, Totally nclosed, C-Face Footed (Removable Base) Fail-safe, spring set Stearns 56 Series brake for holding or stopping Brake has manual wear adjustment for longer pad life Manual release lever on rear of brake housing Brake leads are terminated at the brake Universal mounting, no modifications needed Brake coil voltage matches motor voltages Ball bearings, mechanically locked on shaft end 1.15 Service Factor (1.0 Service Factor as noted) Nameplated 60/50 hertz at next lowest horsepower CATALOG BRAK RATING (lb/ft) 1/3 115/ C D / ,6 1/2 115/ C D / ,6 3/4 115/ C D / , / C D / ,6 1 1/2 115/ C D / ,6 1 CAPACITOR START/CAPACITOR RUN DSIGN FOR RDUCD AMPRAG 2 CAPACITOR START INDUCTION RUN DSIGN 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION Three Phase, 1800 RPM, Totally nclosed, C-Face Footed (Rigid or Removable Base) lectric Motors In addition to the Single Phase above: Brake has manual wear adjustment up to 25 lb-ft. for longer pad life Stearns brakes, 56 series through 25 Lb-Ft, 87 series above 35 Lb-Ft and larger Brake leads routed through motor conduit box (TNV only) Universal mounting up to 15 Lb-Ft, C406 has vertical springs included CR 200 Corona resistant magnet wire (motor can be operated 10:1 variable torque and 2:1 constant torque) 1.15 Service Factor, 1.0 Service Factor where footnoted BRAK RATING (lb/ft) 1/ /460 56C D / / /460 56C D / / /460 56C D / /460 56C D / / /460 56HC D / / TC C / / TC C / / TC C / AL,F,N, / TC C / AL,F,N,17,82 7 1/2 230/ TC C / AL,N,17, / TC C / AL,N,17,82 SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION SRVIC FACTOR 82 WLDD RIGID BAS AL ALUMINUM FRAM CONSTRUCTION F CLASS F INSULATION N TOTALLY NCLOSD, NON-VNTILATD MAIL: hubsales@regalbeloit.com -7

8 Powerwash XT Washdown Duty, 1800 RPM White poxy, Totally nclosed Double sealed ball bearings 303 Stainless steel shaft with spring loaded contact seals in each endshield (drive end only on TNV motors) Stainless steel conduit box cover, nameplate, fan guard (TFC) and hardware Cast oversized conduit box with high temperature Nitrile gaskets and threaded entrance Plugged drain holes in each endshield for all angle mounting Internal corrosion resistant coatings on frame, base, endshields, rotor and stator USDA-approved, white epoxy RUST-OLUM paint UL Recognized, CSA Certified and C Mark ncapsulated electronic starting switch is impervious to moisture (single phase only) Capacitor start induction run design for high starting torque unless otherwise noted (single phase only) Class F insulation (single phase only) 1.15 Service Factor (single phase only) 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power (three phase only) IP55 SINGL PHAS C-FAC LSS CATALOG 1/3 115/ C N / /2 115/ C N / /4 115/ C N / / C N / /2 115/ C N / THR PHAS C-FAC LSS CATALOG NOM. FF. 1/ /460 56C N / N 1/ /460 56C N / N 1/ /460 56C N / N 3/ /460 56C N / N /460 56C N / N / TC N / N 1 1/ / TC N / N / TC N654A / V / TC N656B / V, / TC N658B / V,13 CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. 13 F1 MOUNTING ONLY, CANNOT RASSMBL TO F2 N TOTALLY NCLOSD, NON-VNTILATD V SUITABL FOR 10:1 CT 60 MINUT DUTY, OTHRWIS 2:1 CT SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. IP55-8 CALL: (605) FAX: (605)

9 Powerwash SXT Washdown Duty, 1800 RPM All Stainless Steel, Totally nclosed Double sealed ball bearings 303 stainless steel shaft with spring loaded contact seals in each end. (Drive end only on TNV) 300 Series Stainless steel external construction: frame, endshields, conduit box, mounting base and hardware for superior corrosion resistance Internal corrosion resistant coatings on rotor and heavy polyester varnish on the stator 100% Paint-free construction One way condensation drains in each endshield and conduit box for all angle mounting Nitrile Buna - N gaskets and seals on conduit box, through bolts and endshields Nameplate information laser etched on frame UL Recognized, CSA Certified and C Mark ncapsulated electronic starting switch is impervious to moisture (single phase only) Capacitor start induction run design for high starting torque unless otherwise noted (single phase only) Suitable for use on VFD 10:1 Variable torque, 10:1 (TFC) or 1000:1 (TNV) Constant Torque (3 phase only) MAX GUARD Class F insulation system (3 phase only) 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power (3 phase only) Rated 60/50 hertz, 190/380 volt at next lower horsepower (3 phase only) SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. IP55 lectric Motors SINGL PHAS C-FAC D (RIGID BAS) CATALOG 1/2 115/ C N / /4 115/ C N / / C N / /2 115/ C N / / TC N / THR PHAS C-FAC LSS CATALOG NOM. FF. 1/ /460 56C N / N 1/ /460 56C N / N 3/ /460 56C N / N 1 1 1/ /460 56C N / / TC N434A / /460 56C N / / TC N436A / /460 56C N / / TC N438A / CATALOG NUMBRS (CAT ) HIGHLIGHTD IN BOLD BLU HAV FFICINCY LVLS THAT MT ISA RQUIRMNTS. N TOTALLY NCLOSD, NON-VNTILATD MAIL: hubsales@regalbeloit.com -9

10 Inverter (Vector) Duty: Black Max, 1800 RPM 1000:1 Contact Torque, TNV, Three Phase Applications: Designed for inverter or vector applications where up to a 1000:1 Constant Torque speed range is required. Typical uses include: material handling, machine tools, conveyors, crane and hoist, metal processing, test stands, pumps compressors, textile processing, and other industrial machinery installed in dusty or dirty environments. : MAX GUARD Class F insulation system Constant Torque operation from 0 to base speed on Vector Drive Constant Horsepower operation up to twice base RPM Continuous duty at 40ºC ambient Optimized for operation with IGBT inverter (NMA Design A) Normally closed thermostats (one per phase, Class F) Removable rigid base, as noted Ball Bearings Field reversible to F2 (except as noted) ncoder and brake provisions included on opposite drive end (maximum 10 lb-ft brake) UL Recognized, CSA Certified, and C Mark Three year warranty SUITABL FOR US ON VFD. CONSULT FACTORY FOR GUIDLINS. C-FAC D (RIGID BAS) OVR LOAD 1/4 230/460 56C TSTAT Y / S,13 1/2 230/460 56C TSTAT Y / S,6, C TSTAT Y S,6,13 230/460 56C TSTAT Y / S,6, C TSTAT Y S,6,13 230/ TC TSTAT Y / S,6,13 1 1/2 230/ TC TSTAT Y / S,6,13 230/ TC TSTAT Y / S,6, / TC TSTAT Y / TC TSTAT Y S,6, TC TSTAT Y / TC TSTAT Y541A 8.2/ AL TC TSTAT Y558A AL 5 230/ TC TSTAT Y543A 13.4/ AL TC TSTAT Y559A AL 7 1/2 230/ TC TSTAT Y / AL TC TSTAT Y AL / TC TSTAT Y / AL TC TSTAT Y AL / TC TSTAT Y / AL,I TC TSTAT Y AL,I / TC TSTAT Y / TC TSTAT Y / TC TSTAT Y / I TC TSTAT Y I / TC TSTAT Y / I TC TSTAT Y I BLU SHADD ARAS AR CAST IRON FRAMS. 6 BOLT-ON RMOVABL BAS FOR LSS MOUNTING OPTION 13 F1 MOUNTING ONLY, CANNOT RASSMBL TO F2 I RDUCD 120 HZ S STL FRAM CONSTRUCTION AL ALUMINUM FRAM CONSTRUCTION -10 CALL: (605) FAX: (605)

11 DC Permanent Magnet, 1750 RPM SCR Rated, Totally nclosed C-Face Footed (Removable Base) Class F insulation NMA C-Face with removable rigid base Oversized brushes for extra long life Permanently lubricated sealed ball bearings Linear speed/torque characteristics over entire speed range High starting torque, high peak current capability Usable on PWM type DC adjustable speed drives at higher HP rating asy brush access with unique brush holder design HP DC VOLTS FRAM NCL. C.T. SPD RANG PWM HP RATING 1/ C TFC Z602 2: C TFC Z603 2: / C TFC Z604 2: / C TFC Z606 2: C TFC Z607 2: / C TFC Z610 2: C TFC Z611 2: C TFC Z612 2: C TFC Z613 2: / C TFC Z614 2: TC TFC Z615 2: TC TFC Z616 2: /145TC TFC Z617 2: lectric Motors 84 NMA 145T C-FAC MOUNTING WITH RMOVABL 182T RIGID BAS Washdown Class F insulation NMA C-Face with removable rigid base Oversized brushes for extra long life Doubled sealed, oversized ball bearings Corrosion resistant 303 stainless steel shaft V ring Forsheda seals High temperature, moisture resistant lubricant xterior and interior components protected with enamel & polyester compounds Aluminum conduit box, threaded and gasketed Drains at 3:00, 6:00, 9:00 and 12:00 locations Sealed machine fits Stainless steel nameplate USDA approved white epoxy paint HP DC VOLTS FRAM NCL. C.T. SPD RANG PWM HP RATING 1/ C TNV Z630 20: / C TNV Z631 20: / C TNV Z634 20: / C TNV Z636 20: C TNV Z637 20: C TFC Z638 2: C TFC Z639 2: / C TFC Z641 2: MAIL: hubsales@regalbeloit.com -11

12 TYPICAL C-FAC MOTOR TYPICAL RIGID BAS MOTOR C* (48-184) (182T-449) BB AH AH AB 45ϒ P 45ϒ C * N-W AB P BS 2F B BA AK BD U AA LAD HOL 'H' DIA 4 HOLS AJ A BF 4 HOLS O D BS 2F (B) BA U AA LAD HOL 'H' DIA. 4 HOLS A O D FRAM D 2F H O P AB BB BD U N-W AA AH AJ AK BA (MAX) (MAX) (MAX) (MIN) (MAX) BF SLOT / / SLOT / / H SLOT / / T / / T / / / / / / T / / T / / / / T / T / U / / U / / T / / T / / U / / U / / T / / T / / TS / / TS / / U / U / T / T / TS / TS / U / / U / / T / / T / / TS / / TS / /8-11 *C DIMNSIONS AR SHOWN ON MOTOR PAGS -3 TO -11. WARNING FOR SAFTY AND TO COMPLY WITH LOCAL AND NATIONAL SAFTY CODS, TH PURCHASR OR USR MUST PROVID PROTCTIV GUARDS OVR ALL SHAFT XTNSIONS AND DVICS MOUNTD THRON. -12 CALL: (605) FAX: (605)