Hydraulic Power & Control

Transcription

1 ydraulic Power & Control Category ydraulic Pumps & Accessories Pumps Foot Brackets Water Pump Strainers, Skimmers, Foot Valves ydraulic Motors & Accessories ydraulic Motors Overhung Load Adapters ydrostatic Transmissions ydraulic Cylinders & Accessories Steering Units & Accessories ydraulic Valves & Accessories ydraulic Filters & Accessories Power Units & Accessories ydraulic System Accessories Accumulators & Accessories Meters Gauges Gauge Accessories (Snubbers, Boots) Geared Dividers eat Exchangers Pressure Switches igh Force ydraulics Enerpac Power Team Page ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information. 83

2 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Category Single ydraulic Pumps Fixed Displacement (Vane) Vickers V0/V0F & V20/V20F Vane Pumps (To 800 ) Vickers V Series Vane Pumps (To 800. Low Noise, 800 Capability) Vickers VQ Series Vane Pumps (To 800. igh Speed / igh Pressure Capability).. 36 Miscellaneous Single & Tandem Vane Pumps Fixed Displacement (Gear) aldex Barnes W900 Series (To 800 ) ydreco 500K Series (To 800 ) ydreco 500M Series (To 800 ) Eaton Series 26 (To 800 ) Eaton Series L2 (To 800 ) Permco Box Pumps (PTO Pumps) (To 800 ) Miscellaneous Single Gear Pumps Variable Displacement (Piston) Vickers PVE Series Piston Pumps (To 800 ) Vickers PVQ Series Piston Pumps (To 800. Low Noise, 800 Capability) Eaton Medium Duty Piston Pumps (To 800. igh Speed / igh Pressure) Eaton 420 Series Mobile Piston Pumps (To 800. igh Speed / igh Pressure) Double ydraulic Pumps Fixed Displacement (Vane) Vickers V200 Series Double Vane Pumps (To ) Miscellaneous Double Vane Pumps Fixed Displacement (Gear) Miscellaneous Double Gear Pumps Dump Pumps Permco DM400 Series Dump Pumps (To 800 ) Permco DMD/DM640 Series Dump Pumps (To 800 ) Refuse Pump System Permco Versa-Pak System Power Steering Pumps Vickers VTM-42 Power Steering Pumps and Pumps Doering Series Integrated ydraulics P7 Series Air-Operated Diaphragm Pumps Aro Diaphragm Pumps Centrifugal Pumps ypro Centrifugal Pumps For Agricultural Spray Applications Pump Accessories Foot Brackets Water Pump Strainers, Skimmers, Foot Valves Technical Information, Performance, Dimensions, Model Codes Vane Pumps Vickers Vane Pumps Vickers V0 & V20 Series Vane Pumps Vickers V200 Series Double Vane Pumps Vickers V Series Vane Pumps Vickers VQ Series Vane Pumps Gear Pumps aldex Barnes W900 Series Pumps ydreco 500K Series Gear Pumps Page 84

3 Category ydreco 500M Series Pumps Eaton Series 26 Pumps Eaton Series L2 Pumps Permco Box Pumps Permco DM400 Series Dump Pumps Permco DMD/DM640 Series Dump Pumps Piston Pumps Eaton Medium Duty Piston Pumps Eaton 420 Series Mobile Piston Pumps Vickers PVB Series Piston Pumps Vickers PV Series Piston Pumps Vickers PVQ Series Piston Pumps Diaphragm Pumps Aro Air-Operated Non-Metallic Diaphragm Pumps Page ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 85

4 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 Vickers V0 Vane Pumps Mounting Flange: SAE A or SAE B Mounting Flange. Porting: NPT: " NPT, /2" NPT. SAE: -5/6-2 Straight Thread, 3/4-6 Straight Thread. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 534 Replacement Parts: page 04 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers Part No. See Note Above CLD B V0-PP-A20 CLD B Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ V0-PP-A20 CLD B V0-PP-B20 CLD B V0-PP-B20 CLD B V0-PP-C20 CLD B V0-PP-C20 CLD B V0-PP-D20 CLD B V0-PP-D20 CLD B V0-PP-2A20 CLD B V0-PP-2A20 CLD B V0-PP-2B20 CLD B V0-PP-2B20 CLD B V0-PP-2C20 CLD B V0-PP-2C20 CLD B V0-PP-2D20 CLD B V0-PP-2D20 Ring Size NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Position Port Port 90 C Port Port 90 C Rot. C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 86

5 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 Vickers Part No. See Note Above CLD B V0-PP-A20 CLD B V0-PP-A20 CLD B V0-PP-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT Position Port Port 90 C Rot. C Max. PSI & Max Pneumatic Power & Control CLD B V0-PP-B20 CBM V0-PP-C20 CLD B V0-PP-C20 CLD B V0-PP-C20 CLD B V0-PP-D20 CLD B V0-PP-D20 CLD B V0-PP-38A20 NPT NPT NPT NPT NPT NPT NPT In-line with inlet (C) Port C C C Fluid Conveying CLD B V0-PP-38A20 CLD B V0-PP-38B20 CLD B V0-PP-38B20 CLD B V0-PP-38C20 CLD B V0-PP-38C20 NPT NPT NPT NPT NPT Port 90 C 90 C C C Miscellaneous Products CLD B V0-PP-38D20 CLD B V0-PP-38D20 CLF B V0-SS-A20 CLF B V0-SS-A20 CLF B V0-SS-B20 CLF B V0-SS-B20 NPT NPT SAE SAE SAE SAE Port Port 90 C 90 C C C Indexes & Technical Information CLF B V0-SS-C20 CLF B V0-SS-C20 CLF B V0-SS-D20 CLF B V0-SS-D20 CLF B V0-SS-2A20 CLF B V0-SS-2A20 CLF B V0-SS-2B20 CLF B V0-SS-2B20 SAE SAE SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C C

6 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLF B V0-SS-2C20 CLF B V0-SS-2C20 CLF B V0-SS-2D20 CLF B V0-SS-2D20 CLF B V0-SS-A20 CLF B V0-SS-A20 CLF B V0-SS-B20 CLF B V0-SS-B20 CLF B V0-SS-C20 CLF B V0-SS-C20 CLF B V0-SS-D20 CLF B V0-SS-D20 CLF B V0-SS-38A20 CLF B V0-SS-38A20 CLF B V0-SS-38B20 CLF B V0-SS-38B20 CLF B V0-SS-38C20 CLF B V0-SS-38C20 CLG B V0-SS-38D20 CLG2 CLJ32 CLJ B 79AR00047A -B 79AR00053A -B V0-SS-38D20 V0-6SS-C20 V0-6SS-2C20 CLD B V0-P2P-A20 CLD B V0-P2P-A20 CLD B V0-P2P-B20 CLD B V0-P2P-B20 CLD B V0-P2P-C20 CLD6 Vickers Part No. See Note Above B V0-P2P-C20 CLD B V0-P2P-D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE NPT NPT NPT NPT NPT NPT NPT Position Port Port 90 C Port Port 90 C Port Port 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 88

7 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLD B V0-P2P-D20 CLD B V0-P2P-2A20 CLD65 Vickers Part No. See Note Above B V0-P2P-2A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT Position 90 Port Port Rot. C C Max. PSI & Max Pneumatic Power & Control CLD B V0-P2P-2B20 CLD B V0-P2P-2B20 CLD B V0-P2P-2C20 CLD B V0-P2P-2C20 CLD B V0-P2P-2D20 CLD B V0-P2P-2D20 CLD B V0-P2P-A20 NPT NPT NPT NPT NPT NPT NPT C Port C C C Fluid Conveying CLD B V0-P2P-A20 CLD B V0-P2P-B20 CLD B V0-P2P-B20 CBM V0-P2P-C20 CLD B V0-P2P-C20 NPT NPT NPT NPT NPT Port 90 C 90 In-line with inlet (C) C C Miscellaneous Products CLD B V0-P2P-C20 CLD B V0-P2P-D20 CLD B V0-P2P-D20 CLD B V0-P2P-38A20 CLD B V0-P2P-38A20 CLD B V0-P2P-38B20 NPT NPT NPT NPT NPT NPT Port Port 90 C C C C Indexes & Technical Information CLD B V0-P2P-38B20 CLD B V0-P2P-38C20 CLD B V0-P2P-38C20 CLD B V0-P2P-38D20 CLD B V0-P2P-38D20 CLG B V0-S2S-A20 CLG B V0-S2S-A20 CLG B V0-S2S-B20 NPT NPT NPT NPT NPT SAE SAE SAE Port Port 90 C C C C C

8 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLG B V0-S2S-B20 CLG B V0-S2S-C20 CLG B V0-S2S-C20 CLG B V0-S2S-D20 CLG B V0-S2S-D20 CLG B V0-S2S-A20 CLG B V0-S2S-A20 CLG B V0-S2S-B20 CLG B V0-S2S-B20 CLG B V0-S2S-C20 CZ V0-S2S-C20 CLG B V0-S2S-C20 CLG B V0-S2S-D20 CLG B V0-S2S-D20 CLG B V0-S2S-38A20 CLG B V0-S2S-38A20 CLG B V0-S2S-38B20 CLG B V0-S2S-38B20 CLG B V0-S2S-38C20 CLG B V0-S2S-38C20 CLG B V0-S2S-38D20 CLG B V0-S2S-38D20 CLJ B V0-6S2S-2A20 CLJ B V0-6S2S-2A20 CLJ B V0-6S2S-2B20 CLJ B V0-6S2S-2B20 CLJ B V0-6S2S-2C20 CLJ72 Vickers Part No. See Note Above B V0-6S2S-2C20 CLJ B V0-6S2S-2D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position Port Port 90 C 90 In-line with inlet (C) Port Port 90 C Port Port 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 90

9 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLJ B V0-6S2S-2D20 CLD B V0-P3P-A20 CLD89 Vickers Part No. See Note Above B V0-P3P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE NPT NPT Position 90 Port Port Rot. C C Max. PSI & Max Pneumatic Power & Control CLD B V0-P3P-B20 CLD B V0-P3P-B20 CLD B V0-P3P-C20 CLD B V0-P3P-C20 CLD B V0-P3P-D20 CLD B V0-P3P-D20 CLD B V0-P3P-2A20 NPT NPT NPT NPT NPT NPT NPT C Port C C C Fluid Conveying CLD B V0-P3P-2A20 CLD B V0-P3P-2B20 CLD B V0-P3P-2B20 CLE B V0-P3P-2C20 CLE B V0-P3P-2C20 NPT NPT NPT NPT NPT Port 90 C 90 C C C Miscellaneous Products CLE B V0-P3P-2D20 CLE B V0-P3P-2D20 CJZ V0-P3P-A20 CLE B V0-P3P-A20 CLE B V0-P3P-A20 CLE B V0-P3P-B20 NPT NPT NPT NPT NPT NPT inlet (A) Port Port 90 C C C Indexes & Technical Information CLE B V0-P3P-B20 CLE B V0-P3P-C20 CBM V0-P3P-C20 CLE B V0-P3P-C20 CLE B V0-P3P-D20 CLE B V0-P3P-D20 CLE B V0-P3P-38A20 CLE B V0-P3P-38A20 NPT NPT NPT NPT NPT NPT NPT NPT In-line with inlet (C) Port Port C C C C

10 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLE B V0-P3P-38B20 CLE B V0-P3P-38B20 CLE B V0-P3P-38C20 CLE B V0-P3P-38C20 CLE B V0-P3P-38D20 CLE B V0-P3P-38D20 CLG B V0-S3S-A20 CLG B V0-S3S-A20 CLG B V0-S3S-B20 CLG B V0-S3S-B20 CLG B V0-S3S-C20 CLG B V0-S3S-C20 CLG B V0-S3S-D20 CLG B V0-S3S-D20 CLG B V0-S3S-2A20 CLG B V0-S3S-2A20 CLG B V0-S3S-2B20 CLG B V0-S3S-2B20 CLG B V0-S3S-2C20 CLG B V0-S3S-2C20 CLG B V0-S3S-2D20 CLG60 Vickers Part No. See Note Above B V0-S3S-2D20 CLG B V0-S3S-A20 CLG B V0-S3S-A20 CLG B V0-S3S-B20 CLG B V0-S3S-B20 CLG B V0-S3S-C20 CLG B V0-S3S-C20 CLG B V0-S3S-D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT NPT NPT NPT SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position 90 C Port Port 90 C Port Port 90 C Port Port 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 92

11 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLG B V0-S3S-D20 CLG B V0-S3S-38A20 CLG70 Vickers Part No. See Note Above B V0-S3S-38A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE Position 90 Port Port Rot. C C Max. PSI & Max Pneumatic Power & Control CLG B V0-S3S-38B20 CLG B V0-S3S-38B20 CLG B V0-S3S-38C20 CLG B V0-S3S-38C20 CLG B V0-S3S-38D20 CLG B V0-S3S-38D20 CLJ B V0-6S3S-2A20 SAE SAE SAE SAE SAE SAE SAE C Port C C C Fluid Conveying CLK B V0-6S3S-2A20 CLK B V0-6S3S-2B20 CLK B V0-6S3S-2B20 CLK B V0-6S3S-2C20 CLK B V0-6S3S-2C20 SAE SAE SAE SAE SAE Port 90 C 90 C C C Miscellaneous Products CLK B V0-6S3S-2D20 CLK B V0-6S3S-2D20 CLK B V0-6S3S-A20 CLK B V0-6S3S-A20 CLK B V0-6S3S-B20 CLK B V0-6S3S-B20 SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C Indexes & Technical Information CLK B V0-6S3S-C20 CLK B V0-6S3S-C20 CLK B V0-6S3S-D20 CLK B V0-6S3S-D20 CLE B V0-P4P-A20 CLE B V0-P4P-A20 CLE B V0-P4P-B20 CLE B V0-P4P-B20 SAE SAE SAE SAE NPT NPT NPT NPT Port Port 90 C 90 C C C C

12 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLE B V0-P4P-C20 CLE B V0-P4P-C20 CLE B V0-P4P-D20 CLE B V0-P4P-D20 CLE B V0-P4P-2A20 CLE B V0-P4P-2A20 CLE B V0-P4P-2B20 CLE B V0-P4P-2B20 CLE B V0-P4P-2C20 CLE B V0-P4P-2C20 CLE B V0-P4P-2D20 CLE B V0-P4P-2D20 CLE B V0-P4P-A20 CLE B V0-P4P-A20 CLE B V0-P4P-B20 CLE B V0-P4P-B20 CLE B V0-P4P-C20 CBM V0-P4P-C20 CLE B V0-P4P-C20 CLE B V0-P4P-D20 CLE B V0-P4P-D20 CLE B V0-P4P-38A20 CLE B V0-P4P-38A20 CLE B V0-P4P-38B20 CLE B V0-P4P-38B20 CLE B V0-P4P-38C20 CLE B V0-P4P-38C20 CLE B V0-P4P-38D20 CLE62 Vickers Part No. See Note Above B V0-P4P-38D20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Position Port Port 90 C Port Port 90 C 90 In-line with inlet (C) Port Port 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 94

13 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLG B V0-S4S-A20 CLG78 Vickers Part No. See Note Above B V0-S4S-A20 CLG B V0-S4S-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE Position Port Port 90 C Rot. C Max. PSI & Max Pneumatic Power & Control CLG B V0-S4S-B20 CLG B V0-S4S-C20 CJM CLG B V0-S4S-C20 V0-S4S-C20 CLG B V0-S4S-D20 CLG B V0-S4S-D20 CLG B V0-S4S-2A20 SAE SAE SAE SAE SAE SAE SAE In-line with inlet (C) Port C C C C Fluid Conveying CLG B V0-S4S-2A20 CLG B V0-S4S-2B20 CLG B V0-S4S-2B20 CLG B V0-S4S-2C20 CLG B V0-S4S-2C20 SAE SAE SAE SAE SAE Port 90 C 90 C C C Miscellaneous Products CLG B V0-S4S-2D20 CLG B V0-S4S-2D20 CLG B V0-S4S-A20 CLG B V0-S4S-A20 CLG B V0-S4S-B20 CLG B V0-S4S-B20 SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C Indexes & Technical Information CLG B V0-S4S-C20 CLG B V0-S4S-C20 CLG B V0-S4S-D20 CL B V0-S4S-D20 CL B V0-S4S-38A20 CL B V0-S4S-38A20 CL B V0-S4S-38B20 CL B V0-S4S-38B20 SAE SAE SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C C

14 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CL B V0-S4S-38C20 CL B V0-S4S-38C20 CL B V0-S4S-38D20 CL B V0-S4S-38D20 CLK B V0-6S4S-2A20 CLK B V0-6S4S-2A20 CLK B V0-6S4S-2B20 CLK B V0-6S4S-2B20 CLK B V0-6S4S-2C20 CLK B V0-6S4S-2C20 CLK B V0-6S4S-2D20 CLK B V0-6S4S-2D20 CLE B V0-P5P-A20 CLE B V0-P5P-A20 CLE B V0-P5P-B20 CLE B V0-P5P-B20 CLE B V0-P5P-C20 CLE B V0-P5P-C20 CLE B V0-P5P-D20 CLE B V0-P5P-D20 CLE B V0-P5P-2A20 CLE B V0-P5P-2A20 CLE B V0-P5P-2B20 CLE B V0-P5P-2B20 CLE B V0-P5P-2C20 CLE B V0-P5P-2C20 CLE B V0-P5P-2D20 CLE78 Vickers Part No. See Note Above B V0-P5P-2D20 CLE B V0-P5P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Position Port Port 90 C Port Port 90 C Port Port 90 C Port Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 96

15 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 Vickers Part No. See Note Above CLE B V0-P5P-A20 CLE B V0-P5P-B20 CLE B V0-P5P-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT Position Port 90 C 90 Rot. C C Max. PSI & Max Pneumatic Power & Control CBM V0-P5P-C20 CLE B V0-P5P-C20 CLE B V0-P5P-C20 CLE B V0-P5P-D20 CLE B V0-P5P-D20 CLE B V0-P5P-38A20 CLE B V0-P5P-38A20 NPT NPT NPT NPT NPT NPT NPT In-line with inlet (C) Port Port C C C Fluid Conveying CLE B V0-P5P-38B20 CLE B V0-P5P-38B20 CLE B V0-P5P-38C20 CLE B V0-P5P-38C20 CLE B V0-P5P-38D20 NPT NPT NPT NPT NPT C C C Miscellaneous Products CLE B V0-P5P-38D20 CL B V0-S5S-A20 CL B V0-S5S-A20 CL B V0-S5S-B20 CL B V0-S5S-B20 CL B V0-S5S-C20 NPT SAE SAE SAE SAE SAE Port Port 90 C 90 C C C Indexes & Technical Information CL B V0-S5S-C20 CL B V0-S5S-D20 CL B V0-S5S-D20 CL B V0-S5S-2A20 CL B V0-S5S-2A20 CL B V0-S5S-2B20 CL B V0-S5S-2B20 CL B V0-S5S-2C20 SAE SAE SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C C

16 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CL B V0-S5S-2C20 CL B V0-S5S-2D20 CL B V0-S5S-2D20 CL B V0-S5S-A20 CL B V0-S5S-A20 CL B V0-S5S-B20 CL B V0-S5S-B20 CBM V0-S5S-C20 CL B V0-S5S-C20 CL B V0-S5S-C20 CL B V0-S5S-D20 CL B V0-S5S-D20 CL B V0-S5S-38A20 CL B V0-S5S-38A20 CL B V0-S5S-38B20 CL B V0-S5S-38B20 CL B V0-S5S-38C20 CL B V0-S5S-38C20 CL B V0-S5S-38D20 CL B V0-S5S-38D20 CLK B V0-6S5S-2A20 CLK B V0-6S5S-2A20 CLK B V0-6S5S-2B20 CLK B V0-6S5S-2B20 CLK B V0-6S5S-2C20 CLK B V0-6S5S-2C20 CLK B V0-6S5S-2D20 CLK8 Vickers Part No. See Note Above B V0-6S5S-2D20 CLE B V0-P6P-A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE NPT Position Port Port 90 C 90 In-line with inlet (C) Port Port 90 C Port Port 90 C Port Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 98

17 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLE B V0-P6P-A20 CLE B V0-P6P-B20 CLE98 Vickers Part No. See Note Above B V0-P6P-B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT Position Port 90 C 90 Rot. C C Max. PSI & Max Pneumatic Power & Control CLE B V0-P6P-C20 CLF B V0-P6P-C20 CLF B V0-P6P-D20 CLF B V0-P6P-D20 CLF B V0-P6P-2A20 CLF B V0-P6P-2A20 CLF B V0-P6P-2B20 NPT NPT NPT NPT NPT NPT NPT Port Port 90 C C C C Fluid Conveying CLF B V0-P6P-2B20 CLF B V0-P6P-2C20 CLF B V0-P6P-2C20 CLF B V0-P6P-2D20 CLF B V0-P6P-2D20 NPT NPT NPT NPT NPT C C C Miscellaneous Products CLF B V0-P6P-A20 CLF B V0-P6P-A20 CLF B V0-P6P-B20 CLF B V0-P6P-B20 CBM V0-P6P-C20 CLF B V0-P6P-C20 NPT NPT NPT NPT NPT NPT Port Port 90 C 90 In-line with inlet (C) C C Indexes & Technical Information CLF B V0-P6P-C20 CLF B V0-P6P-D20 CLF B V0-P6P-D20 CLF B V0-P6P-38A20 CLF B V0-P6P-38A20 CLF B V0-P6P-38B20 CLF B V0-P6P-38B20 CLF B V0-P6P-38C20 NPT NPT NPT NPT NPT NPT NPT NPT Port Port 90 C 90 C C C C

18 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLF B V0-P6P-38C20 CLF B V0-P6P-38D20 CLF B V0-P6P-38D20 CL B V0-S6S-A20 CL B V0-S6S-A20 CL B V0-S6S-B20 CL B V0-S6S-B20 CL B V0-S6S-C20 CL B V0-S6S-C20 CL B V0-S6S-D20 CL B V0-S6S-D20 CL B V0-S6S-2A20 CL B V0-S6S-2A20 CL B V0-S6S-2B20 CL B V0-S6S-2B20 CL B V0-S6S-2C20 CL B V0-S6S-2C20 CL B V0-S6S-2D20 CL B V0-S6S-2D20 CL B V0-S6S-A20 CL B V0-S6S-A20 CL B V0-S6S-B20 CL B V0-S6S-B20 CL B V0-S6S-C20 CL B V0-S6S-C20 CL B V0-S6S-D20 CL B V0-S6S-D20 CL B V0-S6S-38A20 CL77 Vickers Part No. See Note Above B V0-S6S-38A20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position Port Port 90 C Port Port 90 C Port Port 90 C Port Port Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 00

19 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CL B V0-S6S-38B20 CL79 Vickers Part No. See Note Above B V0-S6S-38B20 CL B V0-S6S-38C20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size SAE SAE SAE Position 90 C 90 Rot. C Max. PSI & Max Pneumatic Power & Control CL B V0-S6S-38C20 CL B V0-S6S-38D20 CL B V0-S6S-38D20 CLL B V0-6S6S-2A20 CLL B V0-6S6S-2A20 CLL B V0-6S6S-2B20 CLL B V0-6S6S-2B20 SAE SAE SAE SAE SAE SAE SAE Port Port 90 C 90 C C C C Fluid Conveying CLL B V0-6S6S-2C20 CLL B V0-6S6S-2C20 CLL B V0-6S6S-2D20 CLL B V0-6S6S-2D20 CLF B V0-P7P-A20 SAE SAE SAE SAE NPT Port C C Miscellaneous Products CLF B V0-P7P-A20 CLF B V0-P7P-B20 CLF B V0-P7P-B20 CLF B V0-P7P-C20 CLF B V0-P7P-C20 CLF B V0-P7P-D20 NPT NPT NPT NPT NPT NPT Port 90 C C C C Indexes & Technical Information CLF B V0-P7P-D20 CLF B V0-P7P-2A20 CLF B V0-P7P-2A20 CLF B V0-P7P-2B20 CLF B V0-P7P-2B20 CLF B V0-P7P-2C20 CLF B V0-P7P-2C20 CLF B V0-P7P-2D20 NPT NPT NPT NPT NPT NPT NPT NPT Port Port 90 C C C C C

20 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CLF B V0-P7P-2D20 CLF B V0-P7P-A20 CLF B V0-P7P-A20 CLF B V0-P7P-B20 CLF B V0-P7P-B20 CE V0-P7P-C20 CLF B V0-P7P-C20 CLF B V0-P7P-C20 CLF B V0-P7P-D20 CLF B V0-P7P-D20 CLF B V0-P7P-38A20 CLF B V0-P7P-38A20 CLF B V0-P7P-38B20 CLF B V0-P7P-38B20 CLF B V0-P7P-38C20 CLF B V0-P7P-38C20 CLF B V0-P7P-38D20 CLF B V0-P7P-38D20 CL B V0-S7S-A20 CL B V0-S7S-A20 CL B V0-S7S-B20 CL B V0-S7S-B20 CL B V0-S7S-C20 CL B V0-S7S-C20 CL B V0-S7S-D20 CL B V0-S7S-D20 CL B V0-S7S-2A20 CL93 Vickers Part No. See Note Above B V0-S7S-2A20 CL B V0-S7S-2B20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ Ring Size NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position 90 Port Port 90 C 90 In-line with inlet (C) Port Port 90 C Port Port 90 C Port Port 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 02

21 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 CL B V0-S7S-2B20 CL B V0-S7S-2C20 CL B V0-S7S-2C20 CL B V0-S7S-2D20 CL B V0-S7S-2D20 CLJ B V0-S7S-A20 CLJ B V0-S7S-A20 CLJ B V0-S7S-B20 CLJ B V0-S7S-B20 CLJ B V0-S7S-C20 CLJ B V0-S7S-C20 CLJ B V0-S7S-D20 CLJ B V0-S7S-D20 CLJ B V0-S7S-38A20 CLJ B V0-S7S-38A20 CLJ B V0-S7S-38B20 CLJ B V0-S7S-38B20 CLJ B V0-S7S-38C20 CLJ B V0-S7S-38C20 CLJ B V0-S7S-38D20 CLJ26 CLL53 Vickers Part No. See Note Above B 79AR00056A -B 79AR0004A -B V0-S7S-38D20 V0-6S7S-2C20 Vickers V0 Vane Pumps Vickers Model Code. See Note Above Shaft Ports Displ SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Port Port 90 C Port Port 90 C C C C C C C C C C C C CLL54 V0-6S7S-2C20 SAE C Note: 800 & 00 PSI. Displacement: Cubic inches per revolution. Max PSI & Max based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Min Speed: 600. Ring Size Position Rot. Max. PSI & Max. 03

22 Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 Parts for Vickers V0 Vane Pumps Parts for Vickers V0 Vane Pumps Vickers Model Description CAK Bearing 0.6 CLB Body, SAE-A, " NPT CLB Body. SAE-A, Straight Thread CLB Body, SAE-B, Straight Thread CCC Cartridge Kit, Ring Size 0.3 CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CLB Port, " NPT CLB Port, Straight Thread CAB Pin for Pumps with Ring Size CAD Pin for Pumps with Ring Size CAB Pin for Pumps with Ring Size CJZ Pressure Plate Sub Assy 0.67 CLA Retaining Ring CLA Retaining Ring CAB Bolts for Pumps with Ring Size ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 04

23 ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0 Series Vane Pumps To 800 Parts for Vickers V0 Vane Pumps Vickers Model Description CAA Bolts for Pumps with Ring Size CCC Seal Kit, Buna-N 0.04 CBM # Shaft, 3/4" Straight 0.43 CBM # Shaft, 0.32 CE #38 Shft, Tooth 0.35 CBM #2 Shaft, 0.44 CAK Shaft Key, 3/6 x 0.0 CB Shaft Seal, Buna-N 0.02 CLB Spring Indexes & Technical Information Miscellaneous Products Fluid Conveying 05

24 Single ydraulic Pumps Fixed Displacement Vickers V0F Series Vane Pumps To 800 Vickers V0F Vane Pumps Control Cover The Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: SAE A Mounting Flange. " NPT, 3/4-6 St.Thd., /2" NPT Tank. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 534 Replacement Parts: page 06 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers Part No. See Note Above CBW V0F-P4P-C4D20 CEW Vickers V0F Vane Pumps Control Cover Vickers Model See Note Above Shaft Displ V0F-S4T-A4E20 (SAE-6 inlet, SAE-8 outlet & tank) CAD V0F-P4P-A4D20 C V0F-S4T-A4E-20 (SAE-6 inlet, SAE-8 outlet & tank) Ring Size Rate & Relief Setting Position 4.0 In-line with 000 PSI inlet (C) PSI PSI PSI inlet (A) inlet (A) inlet (A) Rate: Orifice Rate (). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model V0F-P4P-C4D Rot. Max. PSI & Max Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit /4"-Straight /4"-Straig ht Tooth-SAE-A Tooth-SAE-A V0F-S4T-A4E R V0F-P4P-A4D V0F-S4T-A4E ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 06

25 ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V0F Series Vane Pumps To 800 Vickers V0F Vane Pumps Replacement Parts List Part Number Description CCC Cartridge Kit, Ring Size 0.3 CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CCC Cartridge Kit, Ring Size CJZ Pressure Plate Sub Assy 0.67 CCC Seal Kit, Buna-N 0.04 CB Shaft Seal, Buna-N 0.02 CBM # Shaft, 3/4" Straight 0.43 CBM # Shaft, 9Tooth SAE A 0.32 CBM #2 Shaft, 3Tooth SAE B 0.44 CE #38 Shaft, Tooth 0.35 CAK Shaft Key, 3/6 x 0.0 Indexes & Technical Information Miscellaneous Products Fluid Conveying 07

26 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 Vickers V20 Vane Pumps Mounting Flange: SAE A or SAE B Ports: -/4" NPT inlet and 3/4" NPT outlet, or -5/8"-2 SAE inlet and -/6"-2 outlet. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 535 Replacement Parts: page 3 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations are available for delivery in hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers Part No. See Note Above CLN B V20-P5P-A CLN24 Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth B V20-P5P-A CLN B V20-P5P-B CLN B V20-P5P-B CLN B V20-P5P-C CLN B V20-P5P-C CLN B V20-P5P-D CLN B V20-P5P-D CLN B V20-P5P-5A CLN B V20-P5P-5A CLN B V20-P5P-5B CLN B V20-P5P-5B CLN B V20-P5P-5C CLN B V20-P5P-5C CLN B V20-P5P-5D CLN B V20-P5P-5D Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Position 90 C 90 C C 90 C Rot. C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 08

27 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLN B V20-P5P-A 3/4 Stright NPT CLN40 Vickers Part No. See Note Above B V20-P5P-A- L Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size /4 Stright NPT CLN B V20-P5P-B 3/4 Stright NPT Position 90 C Rot. C Max. PSI & Max Pneumatic Power & Control CLN B V20-P5P-B- L 3/4 Stright NPT CLN B V20-P5P-C 3/4 Stright NPT CLN B V20-P5P-C- L 3/4 Stright NPT CLN B V20-P5P-D 3/4 Stright NPT CLN B V20-P5P-D- L 3/4 Stright NPT CLR B V20-S5S-A 3/4 Stright SAE CLR B V20-S5S-A- L 3/4 Stright SAE C C C C C Fluid Conveying CLR B V20-S5S-B 3/4 Stright SAE CLR B V20-S5S-B- L 3/4 Stright SAE CLR B V20-S5S-C 3/4 Stright SAE CLR B V20-S5S-C- L 3/4 Stright SAE CLR B V20-S5S-D 3/4 Stright SAE C 90 C 90 C C Miscellaneous Products CLR B V20-S5S-D- L CLU77 CLU78 720AR00005A- B 720AR00004A- B V20-6S5S-5C V20-6S5S-5C L 3/4 Stright SAE SAE SAE CLU B V20-6S5S-A 3/4 Stright SAE CLU B V20-6S5S-A- L 3/4 Stright SAE CLU B V20-6S5S-B 3/4 Stright SAE C C C C Indexes & Technical Information CLU B V20-6S5S-B- L 3/4 Stright SAE CLU B V20-6S5S-C 3/4 Stright SAE CLU B V20-6S5S-C- L 3/4 Stright SAE CLU B V20-6S5S-D 3/4 Stright SAE CLU B V20-6S5S-D- L CLN B V20-P6P-A CLN B V20-P6P-A CLN B V20-P6P-B 3/4 Stright SAE Tooth Tooth Tooth NPT NPT NPT C C C C C C

28 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLN B V20-P6P-B CLN B V20-P6P-C CLN B V20-P6P-C CLN B V20-P6P-D CLN B V20-P6P-D CLN B V20-P6P-5A CLN B V20-P6P-5A CLN B V20-P6P-5B CLN B V20-P6P-5B CLN B V20-P6P-5C CLN B V20-P6P-5C CLN B V20-P6P-5D CLN B V20-P6P-5D Tooth Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT CJZ V20-P6P-A NPT CLN B V20-P6P-A 3/4 Stright NPT CLN B V20-P6P-A- L 3/4 Stright NPT CLN B V20-P6P-B 3/4 Stright NPT CLN B V20-P6P-B- L 3/4 Stright NPT CBM V20-P6P-C NPT CLN B V20-P6P-C 3/4 Stright NPT CLN B V20-P6P-C- L 3/4 Stright NPT CLN B V20-P6P-D 3/4 Stright NPT CLN B V20-P6P-D- L CLN B V20-P6P-38A CLN B V20-P6P-38A CLN B V20-P6P-38B CLN B V20-P6P-38B CLN B V20-P6P-38C CLN84 Vickers Part No. See Note Above B V20-P6P-38C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size NPT NPT NPT NPT NPT NPT Position 90 C C 90 C inlet (A) 90 C 90 C In-line with inlet (C) C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 0

29 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLN B V20-P6P-38D CLN86 Vickers Part No. See Note Above B V20-P6P-38D CLR B V20-S6S-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth Ring Size NPT NPT SAE Position Rot. C Max. PSI & Max Pneumatic Power & Control CLR B V20-S6S-A CLR B V20-S6S-B CLR B V20-S6S-B CLR B V20-S6S-C CLR B V20-S6S-C CLR B V20-S6S-D CLR B V20-S6S-D Tooth Tooth Tooth Tooth Tooth Tooth Tooth SAE SAE SAE SAE SAE SAE SAE C 90 C C C C C Fluid Conveying CLR B V20-S6S-5A CLR B V20-S6S-5A CLR B V20-S6S-5B CLR B V20-S6S-5B CLR B V20-S6S-5C SAE SAE SAE SAE SAE C 90 C C C Miscellaneous Products CLR B V20-S6S-5C CLR B V20-S6S-5D CLR B V20-S6S-5D SAE SAE SAE CLR B V20-S6S-A 3/4 Stright SAE CLR B V20-S6S-A- L 3/4 Stright SAE CLR B V20-S6S-B 3/4 Stright SAE C C C C Indexes & Technical Information CLR B V20-S6S-B- L 3/4 Stright SAE CLR B V20-S6S-C 3/4 Stright SAE CLR B V20-S6S-C- L 3/4 Stright SAE CLR B V20-S6S-D 3/4 Stright SAE CLR B V20-S6S-D- L CLS B V20-S6S-38A CLS B V20-S6S-38A CLS B V20-S6S-38B 3/4 Stright SAE Tooth - Tooth - Tooth - SAE SAE SAE C C C C C C

30 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLS B V20-S6S-38B CLS B V20-S6S-38C CLS B V20-S6S-38C CLS B V20-S6S-38D CLS8 CLV4 CLV B 720AR0004A- B 720AR0005A- B V20-S6S-38D V20-6S6S-D V20-6S6S-D CLV B V20-6S6S-5A CLV B V20-6S6S-5A CLV B V20-6S6S-5B CLV B V20-6S6S-5B CLV B V20-6S6S-5C CLV B V20-6S6S-5C CLV B V20-6S6S-5D CLV B V20-6S6S-5D CLN B V20-P7P-A CLN B V20-P7P-A CLN B V20-P7P-B CLN B V20-P7P-B CLN B V20-P7P-C CLN B V20-P7P-C CLN B V20-P7P-D CLN B V20-P7P-D CLN B V20-P7P-5A CLN B V20-P7P-5A CLN B V20-P7P-5B CLN B V20-P7P-5B CLN B V20-P7P-5C CLP Vickers Part No. See Note Above B V20-P7P-5C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT Position 90 C C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 2

31 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLP B V20-P7P-5D CLP3 Vickers Part No. See Note Above B V20-P7P-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size NPT NPT CLP B V20-P7P-A 3/4 Stright NPT Position Rot. C Max. PSI & Max Pneumatic Power & Control CLP B V20-P7P-A- L 3/4 Stright NPT CLP B V20-P7P-B 3/4 Stright NPT CLP B V20-P7P-B- L 3/4 Stright NPT CLP B V20-P7P-C 3/4 Stright NPT CBN V20-P7P-C NPT CLP B V20-P7P-C- L 3/4 Stright NPT CLP B V20-P7P-D 3/4 Stright NPT C 90 C In-line with inlet (C) 90 C C C Fluid Conveying CLP B V20-P7P-D- L CLP B V20-P7P-38A CLP B V20-P7P-38A CLP B V20-P7P-38B CLP B V20-P7P-38B 3/4 Stright NPT Tooth - Tooth - Tooth - Tooth - NPT NPT NPT NPT C 90 C C C C Miscellaneous Products CLP B V20-P7P-38C CLP B V20-P7P-38C CLP B V20-P7P-38D CLP B V20-P7P-38D CLS B V20-S7S-A CLS B V20-S7S-A Tooth - Tooth - Tooth - Tooth - Tooth Tooth NPT NPT NPT NPT SAE SAE C C C Indexes & Technical Information CLS B V20-S7S-B CLS B V20-S7S-B CLS B V20-S7S-C CLS B V20-S7S-C CLS B V20-S7S-D CLS B V20-S7S-D CLS B V20-S7S-5A CLS B V20-S7S-5A Tooth Tooth Tooth Tooth Tooth Tooth SAE SAE SAE SAE SAE SAE SAE SAE C 90 C C C C C

32 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLS B V20-S7S-5B CLS B V20-S7S-5B CLS B V20-S7S-5C CLS B V20-S7S-5C CLS B V20-S7S-5D CLS B V20-S7S-5D SAE SAE SAE SAE SAE SAE CLS B V20-S7S-A 3/4 Stright SAE CLS B V20-S7S-A- L 3/4 Stright SAE CLS B V20-S7S-B 3/4 Stright SAE CLS B V20-S7S-B- L 3/4 Stright SAE CLS B V20-S7S-C 3/4 Stright SAE CLS B V20-S7S-C- L 3/4 Stright SAE CLS B V20-S7S-D 3/4 Stright SAE CLS B V20-S7S-D- L CLS B V20-S7S-38A CLS B V20-S7S-38A CLS B V20-S7S-38B CLS B V20-S7S-38B CLS B V20-S7S-38C CLS B V20-S7S-38C CLS B V20-S7S-38D CLS B V20-S7S-38D CLV B V20-6S7S-5A CLV B V20-6S7S-5A CLV B V20-6S7S-5B CLV B V20-6S7S-5B CLV B V20-6S7S-5C CLV53 Vickers Part No. See Note Above B V20-6S7S-5C CLV B V20-6S7S-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position 90 C 90 C C 90 C C 90 C C 90 C 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 4

33 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLV B V20-6S7S-5D CLP B V20-P8P-A CLP3 Vickers Part No. See Note Above B V20-P8P-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth Tooth Ring Size SAE NPT NPT Position 90 Rot. C C Max. PSI & Max Pneumatic Power & Control CLP B V20-P8P-B CLP B V20-P8P-B CLP B V20-P8P-C CLP B V20-P8P-C CLP B V20-P8P-D CLP B V20-P8P-D CLP B V20-P8P-5A Tooth Tooth Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT NPT C 90 C C C C Fluid Conveying CLP B V20-P8P-5A CLP B V20-P8P-5B CLP B V20-P8P-5B CLP B V20-P8P-5C CLP B V20-P8P-5C NPT NPT NPT NPT NPT C 90 C C C C Miscellaneous Products CLP B V20-P8P-5D CLP B V20-P8P-5D NPT NPT CLP B V20-P8P-A 3/4 Stright NPT CJZ V20-P8P-A NPT CLP B V20-P8P-A- L 3/4 Stright NPT CLP B V20-P8P-B 3/4 Stright NPT inlet (A) 90 C C C Indexes & Technical Information CLP B V20-P8P-B- L 3/4 Stright NPT CBM V20-P8P-C NPT CLP B V20-P8P-C 3/4 Stright NPT CLP B V20-P8P-C- L 3/4 Stright NPT CLP B V20-P8P-D 3/4 Stright NPT CLP B V20-P8P-D- L CLP B V20-P8P-38A CLP B V20-P8P-38A 3/4 Stright NPT Tooth - Tooth - NPT NPT C In-line with inlet (C) C C C C

34 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLP B V20-P8P-38B CLP B V20-P8P-38B CLP B V20-P8P-38C CLP B V20-P8P-38C CLP B V20-P8P-38D CLP B V20-P8P-38D CLS B V20-S8S-A CLS B V20-S8S-A CLS B V20-S8S-B CLS B V20-S8S-B CLS B V20-S8S-C CLS B V20-S8S-C CLS B V20-S8S-D CLS B V20-S8S-D CLS B V20-S8S-5A CLS B V20-S8S-5A CLS B V20-S8S-5B CLS B V20-S8S-5B CLS B V20-S8S-5C CLS B V20-S8S-5C CLS B V20-S8S-5D CLS B V20-S8S-5D Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE CLS B V20-S8S-A 3/4 Stright SAE CLS B V20-S8S-A- L 3/4 Stright SAE CLS B V20-S8S-B 3/4 Stright SAE CLS B V20-S8S-B- L 3/4 Stright SAE CLS B V20-S8S-C 3/4 Stright SAE CLS72 Vickers Part No. See Note Above B V20-S8S-C- L Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 3/4 Stright SAE CLS B V20-S8S-D 3/4 Stright SAE Position 90 C 90 C C 90 C C 90 C C 90 C 90 Rot. C C C C C C C C C C C C C C Max. PSI & Max. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 6

35 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLS B V20-S8S-D- L CLS B V20-S8S-38A CLS76 Vickers Part No. See Note Above B V20-S8S-38A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE Tooth - Tooth - Ring Size SAE SAE Position 90 Rot. C C Max. PSI & Max. Pneumatic Power & Control CLS B V20-S8S-38B CLS B V20-S8S-38B CLS B V20-S8S-38C CLS B V20-S8S-38C CLS B V20-S8S-38D CLS B V20-S8S-38D CLV B V20-6S8S-5A Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE SAE SAE SAE C 90 C C C C Fluid Conveying CLV B V20-6S8S-5A CLV B V20-6S8S-5B CLV B V20-6S8S-5B CLV B V20-6S8S-5C CLV B V20-6S8S-5C SAE SAE SAE SAE SAE C 90 C C C C Miscellaneous Products CLV B V20-6S8S-5D CLV B V20-6S8S-5D SAE SAE CLV B V20-6S8S-A 3/4 Stright SAE CLV B V20-6S8S-A- L 3/4 Stright SAE CLV B V20-6S8S-B 3/4 Stright SAE CLV B V20-6S8S-B- L 3/4 Stright SAE C 90 C C C C Indexes & Technical Information CLV B V20-6S8S-C 3/4 Stright SAE CLV B V20-6S8S-C- L 3/4 Stright SAE CLV B V20-6S8S-D 3/4 Stright SAE CLV B V20-6S8S-D- L CLP B V20-P9P-A CLP B V20-P9P-A CLP B V20-P9P-B CLP B V20-P9P-B 3/4 Stright SAE Tooth Tooth Tooth Tooth NPT NPT NPT NPT C 90 C C C C C 7

36 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLP B V20-P9P-C CLP B V20-P9P-C CLP B V20-P9P-D CLP B V20-P9P-D CLP B V20-P9P-5A CLP B V20-P9P-5A CLP B V20-P9P-5B CLP B V20-P9P-5B CLP B V20-P9P-5C CLP B V20-P9P-5C CLP B V20-P9P-5D CLP B V20-P9P-5D Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT CJZ V20-P9P-A NPT CLP B V20-P9P-A 3/4 Stright NPT CLP B V20-P9P-A- L 3/4 Stright NPT CLP B V20-P9P-B 3/4 Stright NPT CLP B V20-P9P-B- L 3/4 Stright NPT CBM V20-P9P-C NPT CLP B V20-P9P-C 3/4 Stright NPT CLP B V20-P9P-C- L 3/4 Stright NPT CLP B V20-P9P-D 3/4 Stright NPT CLP B V20-P9P-D- L CLP B V20-P9P-38A CLP B V20-P9P-38A CLP B V20-P9P-38B CLP B V20-P9P-38B CLP B V20-P9P-38C CLP9 Vickers Part No. See Note Above B V20-P9P-38C CLP B V20-P9P-38D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Ring Size NPT NPT NPT NPT NPT NPT NPT Position C 90 C inlet (A) 90 C 90 C In-line with inlet (C) C 90 C 90 Rot. C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 8

37 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLP B V20-P9P-38D CLS B V20-S9S-A CLS84 Vickers Part No. See Note Above B V20-S9S-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth Tooth Ring Size NPT SAE SAE Position 90 Rot. C C Max. PSI & Max. Pneumatic Power & Control CLS B V20-S9S-B CLS B V20-S9S-B CLS B V20-S9S-C CLS B V20-S9S-C CLS B V20-S9S-D CLS B V20-S9S-D CLS B V20-S9S-5A Tooth Tooth Tooth Tooth Tooth Tooth SAE SAE SAE SAE SAE SAE SAE C 90 C C C C Fluid Conveying CLS B V20-S9S-5A CLS B V20-S9S-5B CLS B V20-S9S-5B CLS B V20-S9S-5C CLS B V20-S9S-5C SAE SAE SAE SAE SAE C 90 C C C C Miscellaneous Products CLS B V20-S9S-5D CLS B V20-S9S-5D SAE SAE CLS B V20-S9S-A 3/4 Stright SAE CLT B V20-S9S-A- L 3/4 Stright SAE CLT B V20-S9S-B 3/4 Stright SAE CLT B V20-S9S-B- L 3/4 Stright SAE C 90 C C C C Indexes & Technical Information CLT B V20-S9S-C 3/4 Stright SAE CLT B V20-S9S-C- L 3/4 Stright SAE CLT B V20-S9S-D 3/4 Stright SAE CLT B V20-S9S-D- L CLT B V20-S9S-38A CLT B V20-S9S-38A CLT B V20-S9S-38B CLT B V20-S9S-38B 3/4 Stright SAE Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE C 90 C C C C C 9

38 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLT B V20-S9S-38C CLT B V20-S9S-38C CLT B V20-S9S-38D CLT B V20-S9S-38D CLW B V20-6S9S-5A CLW B V20-6S9S-5A CLW B V20-6S9S-5B CLW B V20-6S9S-5B CLW B V20-6S9S-5C CLW B V20-6S9S-5C CLW B V20-6S9S-5D CLW B V20-6S9S-5D Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE CLW B V20-6S9S-A 3/4 Stright SAE CLW B V20-6S9S-A- L 3/4 Stright SAE CLW B V20-6S9S-B 3/4 Stright SAE CLW B V20-6S9S-B- L 3/4 Stright SAE CLW B V20-6S9S-C 3/4 Stright SAE CLW B V20-6S9S-C- L 3/4 Stright SAE CLW B V20-6S9S-D 3/4 Stright SAE CLW B V20-6S9S-D- L CLL85 720AR0095A- B V20-P0P-5C 3/4 Stright SAE NPT CLL B V20-P0P-A 3/4 Stright NPT CLL B V20-P0P-A 3/4 Stright NPT CLL B V20-P0P-B 3/4 Stright NPT CLL B V20-P0P-B 3/4 Stright NPT CLL B V20-P0P-C 3/4 Stright NPT CLL B V20-P0P-C 3/4 Stright NPT CLL B V20-P0P-D 3/4 Stright NPT CLL96 Vickers Part No. See Note Above B V20-P0P-D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size /4 Stright NPT Position C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 20

39 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLL97 CLL98 CLL99 Vickers Part No. See Note Above B V20-P0P-38A B V20-P0P-38A B V20-P0P-38B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth - Tooth - Tooth - Ring Size NPT NPT NPT Position 90 C Rot. C Max. PSI & Max Pneumatic Power & Control CLM CLM2 CLM3 CLM4 CLM5 CLQ3 CLQ B V20-P0P-38B B V20-P0P-38C B V20-P0P-38C B V20-P0P-38D B V20-P0P-38D B V20-S0S-5A B V20-S0S-5A Tooth - Tooth - Tooth - Tooth - Tooth - NPT NPT NPT NPT NPT SAE SAE C C C C C Fluid Conveying CLQ5 CLQ6 CLQ7 CLQ8 CLQ B V20-S0S-5B B V20-S0S-5B B V20-S0S-5C B V20-S0S-5C B V20-S0S-5D SAE SAE SAE SAE SAE C 90 C 90 C C Miscellaneous Products CLQ B V20-S0S-5D SAE CLQ B V20-S0S-A 3/4 Stright SAE CLQ B V20-S0S-A 3/4 Stright SAE CLQ B V20-S0S-B 3/4 Stright SAE CLQ B V20-S0S-B 3/4 Stright SAE CLQ B V20-S0S-C 3/4 Stright SAE C 90 C C C C Indexes & Technical Information CLQ B V20-S0S-C 3/4 Stright SAE CLQ B V20-S0S-D 3/4 Stright SAE CLQ28 CLQ29 CLQ30 CLQ3 CLQ32 CLQ B V20-S0S-D B V20-S0S-38A B V20-S0S-38A B V20-S0S-38B B V20-S0S-38B B V20-S0S-38C 3/4 Stright SAE Tooth - Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE SAE C 90 C C C C C

40 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLQ34 CLQ35 CLQ36 CLT34 CLT35 CLT36 CLT37 CLT38 CLT39 CLT40 CLT4 CLM6 CLM7 CLM8 CLM9 CLM20 CLM2 CLM22 CLM23 CLM24 CLM25 CLM26 CLM27 CLM28 CLM29 CLM30 CLM B V20-S0S-38C B V20-S0S-38D B V20-S0S-38D B B B B B B B B B B B B B B B B B B B B B B B B V20-6S0S-5A V20-6S0S-5A V20-6S0S-5B V20-6S0S-5B V20-6S0S-5C V20-6S0S-5C V20-6S0S-5D V20-6S0S-5D V20-PP-A V20-PP-A V20-PP-B V20-PP-B V20-PP-C V20-PP-C V20-PP-D V20-PP-D V20-PP-5A V20-PP-5A V20-PP-5B V20-PP-5B V20-PP-5C V20-PP-5C V20-PP-5D V20-PP-5D Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT CLM B V20-PP-A 3/4 Stright NPT CLM33 Vickers Part No. See Note Above B V20-PP-A Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size /4 Stright NPT Position C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 22

41 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLM B V20-PP-B 3/4 Stright NPT CLM35 Vickers Part No. See Note Above B V20-PP-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size /4 Stright NPT CBM V20-PP-C NPT Position 90 C 90 C In-line with inlet (C) Rot. C Max. PSI & Max Pneumatic Power & Control CLM B V20-PP-C 3/4 Stright NPT CLM B V20-PP-C 3/4 Stright NPT CLM B V20-PP-D 3/4 Stright NPT CLM39 CLM40 CLM4 CLM B B B B V20-PP-D V20-PP-38A V20-PP-38A V20-PP-38B 3/4 Stright NPT Tooth - Tooth - Tooth - NPT NPT NPT C C C C Fluid Conveying CLM43 CLM44 CLM45 CLM46 CLM B B B B B V20-PP-38B V20-PP-38C V20-PP-38C V20-PP-38D V20-PP-38D Tooth - Tooth - Tooth - Tooth - Tooth - NPT NPT NPT NPT NPT C C C C Miscellaneous Products CLQ37 CLQ38 CLQ39 CLQ40 CLQ4 CLQ B B B B B B V20-SS-A V20-SS-A V20-SS-B V20-SS-B V20-SS-C V20-SS-C Tooth Tooth Tooth Tooth Tooth Tooth SAE SAE SAE SAE SAE SAE C 90 C C C C Indexes & Technical Information CLQ43 CLQ44 CLQ45 CLQ46 CLQ47 CLQ48 CLQ49 CLQ B B B B B B B B V20-SS-D V20-SS-D V20-SS-5A V20-SS-5A V20-SS-5B V20-SS-5B V20-SS-5C V20-SS-5C Tooth Tooth SAE SAE SAE SAE SAE SAE SAE SAE C 90 C C C C C

42 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLQ5 CLQ B B V20-SS-5D V20-SS-5D SAE SAE CLQ B V20-SS-A 3/4 Stright SAE CLQ B V20-SS-A 3/4 Stright SAE CLQ B V20-SS-B 3/4 Stright SAE CLQ B V20-SS-B 3/4 Stright SAE CLQ B V20-SS-C 3/4 Stright SAE CLQ B V20-SS-C 3/4 Stright SAE CLQ B V20-SS-D 3/4 Stright SAE CLQ60 CLQ6 CLQ62 CLQ63 CLQ64 CLQ65 CLQ66 CLQ67 CLQ68 CLT58 CLT59 CLT60 CLT6 CLT62 CLT63 CLT64 CLT65 CLT66 CLT67 CLT68 Vickers Part No. See Note Above B B B B B B B B B V20-SS-D V20-SS-38A V20-SS-38A V20-SS-38B V20-SS-38B V20-SS-38C V20-SS-38C V20-SS-38D V20-SS-38D B V20-6SS-A B V20-6SS-A B V20-6SS-B B V20-6SS-B B V20-6SS-C B V20-6SS-C B V20-6SS-D B V20-6SS-D B B B V20-6SS-5A V20-6SS-5A V20-6SS-5B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright SAE Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth Ring Size SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE Position C 90 C C 90 C C 90 C C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 24

43 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLT69 CLT70 CLT7 Vickers Part No. See Note Above B B B V20-6SS-5B V20-6SS-5C V20-6SS-5C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size SAE SAE SAE Position 90 C Rot. C C Max. PSI & Max Pneumatic Power & Control CLT72 CLT73 CLM48 CLM49 CLM50 CLM5 CLM B B B B B B B V20-6SS-5D V20-6SS-5D V20-P2P-A V20-P2P-A V20-P2P-B V20-P2P-B V20-P2P-C Tooth Tooth Tooth Tooth Tooth SAE SAE NPT NPT NPT NPT NPT C 90 C C C C Fluid Conveying CLM53 CLM54 CLM55 CLM56 CLM B B B B B V20-P2P-C V20-P2P-D V20-P2P-D V20-P2P-5A V20-P2P-5A Tooth Tooth Tooth NPT NPT NPT NPT NPT C C C Miscellaneous Products CLM58 CLM59 CLM60 CLM6 CLM62 CLM B B B B B B V20-P2P-5B V20-P2P-5B V20-P2P-5C V20-P2P-5C V20-P2P-5D V20-P2P-5D NPT NPT NPT NPT NPT NPT C 90 C C C C Indexes & Technical Information CLM B V20-P2P-A 3/4 Stright NPT CLM B V20-P2P-A 3/4 Stright NPT CLM B V20-P2P-B 3/4 Stright NPT CLM B V20-P2P-B 3/4 Stright NPT CBN V20-P2P-C NPT CLM B V20-P2P-C 3/4 Stright NPT CLM B V20-P2P-C 3/4 Stright NPT CLM B V20-P2P-D 3/4 Stright NPT C 90 C In-line with inlet (C) 90 C C C

44 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLM7 CLM72 CLM73 CLM74 CLM75 CLM76 CLM77 CLM78 CLM79 CLQ69 CLQ70 CLQ7 CLQ72 CLQ73 CLQ74 CLQ75 CLQ76 CLQ77 CLQ78 CLQ79 CLQ80 CLQ8 CLQ82 CLQ83 CLQ B B B B B B B B B B B B B B B B B B B B B B B B B V20-P2P-D V20-P2P-38A V20-P2P-38A V20-P2P-38B V20-P2P-38B V20-P2P-38C V20-P2P-38C V20-P2P-38D V20-P2P-38D V20-S2S-A V20-S2S-A V20-S2S-B V20-S2S-B V20-S2S-C V20-S2S-C V20-S2S-D V20-S2S-D V20-S2S-5A V20-S2S-5A V20-S2S-5B V20-S2S-5B V20-S2S-5C V20-S2S-5C V20-S2S-5D V20-S2S-5D 3/4 Stright NPT Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT NPT NPT SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE SAE CLQ B V20-S2S-A 3/4 Stright SAE CLQ B V20-S2S-A 3/4 Stright SAE CLQ B V20-S2S-B 3/4 Stright SAE CLQ88 Vickers Part No. See Note Above B V20-S2S-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size /4 Stright SAE Position C 90 C C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 26

45 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLQ B V20-S2S-C 3/4 Stright SAE CLQ90 Vickers Part No. See Note Above B V20-S2S-C Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Ring Size 200 3/4 Stright SAE CLQ B V20-S2S-D 3/4 Stright SAE Position 90 Rot. C Max. PSI & Max Pneumatic Power & Control CLQ92 CLQ93 CLQ94 CLQ95 CLQ96 CLQ97 CLQ B V20-S2S-D B V20-S2S-38A B V20-S2S-38A B V20-S2S-38B B V20-S2S-38B B V20-S2S-38C B V20-S2S-38C 3/4 Stright SAE Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE SAE SAE C 90 C C C C C Fluid Conveying CLQ99 CLR CLT98 CLT99 CLU B V20-S2S-38D B V20-S2S-38D B V20-6S2S-5A B V20-6S2S-5A B V20-6S2S-5B Tooth - Tooth - SAE SAE SAE SAE SAE C C C Miscellaneous Products CLU2 CLU3 CLU4 CLU5 CLU6 CLM B V20-6S2S-5B B V20-6S2S-5C B V20-6S2S-5C B V20-6S2S-5D B V20-6S2S-5D B V20-P3P-A Tooth SAE SAE SAE SAE SAE NPT C C C C Indexes & Technical Information CLM8 CLM82 CLM83 CLM84 CLM85 CLM86 CLM87 CLM B B B B B B B B V20-P3P-A V20-P3P-B V20-P3P-B V20-P3P-C V20-P3P-C V20-P3P-D V20-P3P-D V20-P3P-5A Tooth Tooth Tooth Tooth Tooth Tooth Tooth NPT NPT NPT NPT NPT NPT NPT NPT C 90 C C C C C

46 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLM89 CLM90 CLM9 CLM92 CLM93 CLM94 CLM B B B B B B B V20-P3P-5A V20-P3P-5B V20-P3P-5B V20-P3P-5C V20-P3P-5C V20-P3P-5D V20-P3P-5D NPT NPT NPT NPT NPT NPT NPT CLM B V20-P3P-A 3/4 Stright NPT CLM B V20-P3P-A 3/4 Stright NPT CLM B V20-P3P-B 3/4 Stright NPT CLM B V20-P3P-B 3/4 Stright NPT CLN B V20-P3P-C 3/4 Stright NPT CBM V20-P3P-C NPT CLN B V20-P3P-C 3/4 Stright NPT CLN B V20-P3P-D 3/4 Stright NPT CLN4 CLN5 CLN6 CLN7 CLN8 CLN9 CLN20 CLN2 CLN B B B B B B B B B V20-P3P-D V20-P3P-38A V20-P3P-38A V20-P3P-38B V20-P3P-38B V20-P3P-38C V20-P3P-38C V20-P3P-38D V20-P3P-38D CKK80 720AR00236A V20-P3S-38C L-063 CLR2 CLR3 CLR4 CLR5 Vickers Part No. See Note Above B B B B V20-S3S-A V20-S3S-A V20-S3S-B V20-S3S-B Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ 3/4 Stright NPT Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth 3/4 OD Tooth Tooth Tooth Tooth Ring Size NPT NPT NPT NPT NPT NPT NPT NPT NPT SAE SAE SAE SAE Position 90 C 90 C C 90 C In-line with inlet (C) C 90 C In-line with inlet (C) 90 C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 28

47 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLR6 CLR7 CLR8 Vickers Part No. See Note Above B B B V20-S3S-C V20-S3S-C V20-S3S-D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Tooth Tooth Tooth Ring Size SAE SAE SAE Position 90 Rot. C Max. PSI & Max Pneumatic Power & Control CLR9 CLR20 CLR2 CLR22 CLR23 CLR24 CLR B B B B B B B V20-S3S-D V20-S3S-5A V20-S3S-5A V20-S3S-5B V20-S3S-5B V20-S3S-5C V20-S3S-5C Tooth SAE SAE SAE SAE SAE SAE SAE C 90 C C C C C Fluid Conveying CLR26 CLR B B V20-S3S-5D V20-S3S-5D SAE SAE CLR B V20-S3S-A 3/4 Stright SAE CLR B V20-S3S-A 3/4 Stright SAE CLR B V20-S3S-B 3/4 Stright SAE C C C Miscellaneous Products CLR B V20-S3S-B 3/4 Stright SAE CLR B V20-S3S-C 3/4 Stright SAE CLR B V20-S3S-C 3/4 Stright SAE CLR B V20-S3S-D 3/4 Stright SAE CLR35 CLR B B V20-S3S-D V20-S3S-38A 3/4 Stright SAE Tooth - SAE C C C C Indexes & Technical Information CLR37 CLR38 CLR39 CLR40 CLR4 CLR42 CLR43 CLU B B B B B B B B V20-S3S-38A V20-S3S-38B V20-S3S-38B V20-S3S-38C V20-S3S-38C V20-S3S-38D V20-S3S-38D V20-6S3S-5A Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - Tooth - SAE SAE SAE SAE SAE SAE SAE SAE C 90 C C C C C

48 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 CLU42 CLU43 CLU44 CLU45 CLU46 CLU47 Vickers Part No. See Note Above B B B B B B V20-6S3S-5A V20-6S3S-5B V20-6S3S-5B V20-6S3S-5C V20-6S3S-5C V20-6S3S-5D Vickers V20 Vane Pumps Vickers Model Code See Note Above Shaft Ports Displ Pumps & Accessories Ring Size SAE SAE SAE SAE SAE SAE Position 90 C 90 C 90 V20-6S3S-5D 90 CLU B SAE and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 30

49 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 Parts for Vickers V20 Vane Pumps Miscellaneous Products Fluid Conveying Pneumatic Power & Control Indexes & Technical Information Parts for Vickers V20 Vane Pumps Vickers Model Description CAD Bearing 0.50 CLB Body, SAE-A flange, -/4" NPT port CLB Body, SAE-A flange, Straight Thread port CLB Body, SAE-B flange, Straight Thread port CLB Bolt for Pumps with Ring Size 05, 06 CJC Bolt for Pumps with Ring Size 07, 08, 08, 0, 0.9 CAA Bolt for Pumps with Ring Size 2, CJC Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size 5.00 CAC Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CAB Shaft Key 0.02 CLB Port, 3/4" NPT 3

50 Single ydraulic Pumps Fixed Displacement Vickers V20 Series Vane Pumps To 800 Parts for Vickers V20 Vane Pumps Vickers Model Description CLB Port, Straight Thread CAA Pin for Ring Size 05, CAB Pin for Ring Size 07, 08, CAB Pin for Ring Size 0, 0.0 CAB Pin for Ring Size 2, CJZ Pressure Plate.8 CLA Retaining Ring 0.0 CEX Retaining Ring 0.0 CBD Shaft Seal 0.75 CBJ Shaft, #, 3/4" 0.76 CBJ Shaft, #, Tooth Spline 0.75 CBJ Shaft, #5, 3 Tooth Spline 0.65 CBM Shaft, #38, Tooth Spline 0.56 CLA Spring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 32

51 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers V20F Series Vane Pumps To 800 Vickers V20F Vane Pumps Control Cover The Control Cover limits flow to the operating system to the desired maximum. Excess flow is diverted to tank. A relief valve is included that limits maximum system pressure. Unless noted otherwise, all pumps have: SAE A Mounting Flange. -/4" NPT, 3/4-6 St.Thd., /2" NPT Tank. Application Information: page 53 Specifications: page 532 Model Codes: page 533 Dimensions: page 535 Replacement Parts: page 33 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers Part No. See Note Above CF V20F-PP-38A8-22L CAC V20F-P3P-38C622 CEL V20F-P3P-38D622 CER V20F-P3P-38D822 CZZ V20F-P3P-38C822L Vickers V20F Vane Pumps Control Cover Vickers Model See Note Above Shaft Displ Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Tooth.590 Dia er Length Ring Size Rate & Relief Setting 8.0 Position inlet (A) 6.0 In-line with inlet (C) Deg. from inlet (D) 90 Deg. from inlet (D) 8.0 In-line with inlet (C) Rate: Orifice Rate (). Non-adjustable pressure compensated fixed orifice in rear cover. Relief Setting: Non-adjustable replaceable cartridge. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model V20F-PP-38A8-22L V20F-P3P-38C V20F-P3P-38D Rot. C C Max. PSI & Max Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit Tooth- er Tooth- er Tooth- er

52 Single ydraulic Pumps Fixed Displacement Vickers V20F Series Vane Pumps To 800 Vickers Part No. Vickers Model V20F-P3P-38D V20F-P3P-38C822L Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit Tooth- er Tooth- er Vickers V20F Vane Pumps Replacement Parts List Part Number Description CJC Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CEG Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size 5.00 CAC Cartridge Kit, Ring Size CAC Cartridge Kit, Ring Size CAB Pin for Pumps with Ring Size CJZ Pressure Plate Sub Assy, Includes Bushing.8 CCB Seal Kit, Buna-N 0.08 CAB Shaft Key, 3/6 x -5/ CBJ # Shaft, 3/4" Straight 0.76 CBD Shaft Seal, Buna-N 0.75 CBJ #5 Shaft, 3 Tooth 0.65 CBM #38 Shaft, Tooth, er Length 0.56 CBJ # Shaft, Tooth 0.75 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 34

53 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 25V Series Vane Pumps To 800 Vickers 25V Vane Pumps For Industrial Applications Low Noise / 800 Capability Unless noted otherwise, all pumps have: SAE B Mounting Flange. SAE 4-Bolt Flange Ports: -/2", ". Application Information: page 53 Specifications: page 537 Model Codes: page 538 Dimensions: page 539 Replacement Parts: page 35 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY inlet position and rotation is available for same-day shipment. See Model Codes page to select a different model code. Vickers 25V Vane Pumps For Industrial Applications Low Noise / 800 Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size CEG V2A-C22R 7/8 Straight Position inlet (C) 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Vickers Part No. Vickers Model V2A-C22R Rot. Max. PSI & Max Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit /8"-Straight Vickers 25V Vane Pumps Replacement Parts List Part Number Description CAC Cartridge Kit, Ring Size 2, Rotation 8.06 CCB Seal Kit, Buna-N 0.08 CDU Shaft Key, 3/6 x -/4 0.0 CBN Shaft Seal, Buna-N 0.03 CBF # Shaft, 3Tooth SAE B.8 CEF # Shaft, 7/8" Straight.3 CEG Spirolox Ring 0.0 CDU Key for # Shaft 0.0 CAM Retainer

54 Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE B Mounting Flange. SAE 4-Bolt Flange Ports: -/2", ". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 543 Replacement Parts: page 40 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in hours. See Model Codes page to select a different model code. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Above Note Above Shaft Displ Ring Size 200 CMF B 25VQ2A-A CMF B 25VQ2A-A CMF B 25VQ2A-B CMF B 25VQ2A-B CMF B 25VQ2A-C CMF B 25VQ2A-C CMF B 25VQ2A-D CMF B 25VQ2A-D CME B 25VQ2A-A20 7/8 Straight CMF B 25VQ2A-A20 7/8 Straight CME B 25VQ2A-B20 7/8 Straight CMF B 25VQ2A-B20 7/8 Straight CMF B 25VQ2A-C20 7/8 Straight CMF B 25VQ2A-C20 7/8 Straight CMF B 25VQ2A-D20 7/8 Straight Position C 90 C C Rot. C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 36

55 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CMF B 25VQ2A-D20 7/8 Straight CMF B 25VQ4A-A CMF B 25VQ4A-A CMF B 25VQ4A-B CMF B 25VQ4A-B CMF B 25VQ4A-C CMF B 25VQ4A-C CMF B 25VQ4A-D CMF B 25VQ4A-D CME B 25VQ4A-A20 7/8 Straight CME B 25VQ4A-A20 7/8 Straight CME B 25VQ4A-B20 7/8 Straight CME B 25VQ4A-B20 7/8 Straight CE VQ4A-C20 7/8 Straight CME B 25VQ4A-C20 7/8 Straight CME B 25VQ4A-C20 7/8 Straight CME B 25VQ4A-D20 7/8 Straight CME B 25VQ4A-D20 7/8 Straight CMF B 25VQ7A-A CMF B 25VQ7A-A CMF B 25VQ7A-B CMF B 25VQ7A-B CE VQ7A-C CMF B 25VQ7A-C CMF B 25VQ7A-C CMF B 25VQ7A-D CMF B 25VQ7A-D CME B 25VQ7A-A20 7/8 Straight CME B 25VQ7A-A20 7/8 Straight Position 90 C C 90 C In-line with inlet (C) 90 C 90 C In-line with inlet (C) 90 C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max

56 Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size CME B 25VQ7A-B20 7/8 Straight CME B 25VQ7A-B20 7/8 Straight CBP VQ7A-C20 7/8 Straight CME B 25VQ7A-C20 7/8 Straight CME B 25VQ7A-C20 7/8 Straight CME B 25VQ7A-D20-7/8 Straight CME B 25VQ7A-D20 7/8 Straight CMF B 25VQ9A-A CMF B 25VQ9A-A CMF B 25VQ9A-B CMF B 25VQ9A-B CMF B 25VQ9A-C CMF B 25VQ9A-C CMF B 25VQ9A-D CMF B 25VQ9A-D CMF B 25VQ9A-A20 7/8 Straight CMF B 25VQ9A-A20 7/8 Straight CMF B 25VQ9A-B20 7/8 Straight CMF B 25VQ9A-B20 7/8 Straight CMF B 25VQ9A-C20 7/8 Straight CMF B 25VQ9A-C20 7/8 Straight CMF B 25VQ9A-D20 7/8 Straight CMF B 25VQ9A-D20 7/8 Straight CMF B 25VQ2A-A CMF B 25VQ2A-A CMF B 25VQ2A-B CMF B 25VQ2A-B CBP VQ2A-C CMF B 25VQ2A-C Position In-line with inlet (C) 90 C 90 C C 90 C C 90 C In-line with inlet (C) Rot. C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 38

57 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 800 Vickers 25VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size CMF B 25VQ2A-C CMF B 25VQ2A-D CMF B 25VQ2A-D CME B 25VQ2A-A20 7/8 Straight CME B 25VQ2A-A20 7/8 Straight CME B 25VQ2A-B20 7/8 Straight CME B 25VQ2A-B20 7/8 Straight CME B 25VQ2A-C20 7/8 Straight CBP VQ2A-C20 7/8 Straight CME B 25VQ2A-C20 7/8 Straight CME B 25VQ2A-D20 7/8 Straight Position 90 C 90 C In-line with inlet (C) 90 C CME B 25VQ2A-D20 7/8 Straight C 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C C C Max. PSI & Max Indexes & Technical Information Miscellaneous Products 39

58 Single ydraulic Pumps Fixed Displacement Vickers 25VQ Series Vane Pumps To 800 Parts for Vickers 25VQ Vane Pumps Parts for Vickers 25VQ Vane Pumps Vickers Model Description CAA Bearing 0.3 CLB Body CE Cartridge Kit, CBP Cartridge Kit, CBP Cartridge Kit, CLB Cartridge Kit, 9 CE Cartridge Kit, CLB Cover CDU Shaft Key 0.0 CAJ Snap Ring 0.0 CEG Snap Ring 0.0 CEZ Screw 0.25 CBN Shaft Seal 0.03 CEF Shaft, 3/4" Straight Shaft.3 CBF Shaft, SAE B - 7/8" - 3 Tooth Spline.8 CAM Washer 0.02 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 40

59 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 800 Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 2", -/4". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 544 Replacement Parts: page 43 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Below Note Above Shaft Displ Ring Size Position CMF B 30VQ24A-A CMF B 30VQ24A-A CMF B 30VQ24A-B CMF B 30VQ24A-B CMF B 30VQ24A-C CMF B 30VQ24A-C CMF B 30VQ24A-D C CMF B 30VQ24A-D C CMF B 30VQ24A-A20 7/8 Straight CMF B 30VQ24A-A20 7/8 Straight CMF B 30VQ24A-B20 7/8 Straight CMF B 30VQ24A-B20 7/8 Straight CMF B 30VQ24A-C20 7/8 Straight CMF B 30VQ24A-C20 7/8 Straight CMF B 30VQ24A-D20 7/8 Straight C Rot. C C C C C C C Max. PSI & Max

60 Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 800 Vickers 30VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Below Vickers Model See Note Above Shaft Displ CMF B 30VQ24A-D20 7/8 Straight C CMF B 30VQ28A-A CMF B 30VQ28A-A CMF B 30VQ28A-B CMF B 30VQ28A-B CMF B 30VQ28A-C CMF B 30VQ28A-C CMF B 30VQ28A-D CMF B 30VQ28A-D C 90 C CMF B 30VQ28A-A20 7/8 Straight CMF B 30VQ28A-A20 7/8 Straight CMF B 30VQ28A-B20 7/8 Straight CMF B 30VQ28A-B20 7/8 Straight CMF B 30VQ28A-C20 7/8 Straight CMF B 30VQ28A-C20 7/8 Straight CMF B 30VQ28A-D20 7/8 Straight C C C C C C C C C CMF B 30VQ28A-D20 7/8 Straight C C Note: 800 and 00 PSI. Displ. cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Ring Size Position Rot. Max. PSI & Max. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 42

61 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 30VQ Series Vane Pumps To 800 Parts for Vickers 30VQ Vane Pumps Fluid Conveying Pneumatic Power & Control Miscellaneous Products Indexes & Technical Information Parts for Vickers 30VQ Vane Pumps Vickers Model Description CAA Bearing 0.3 CLB Body CLB Cartridge Kit, 24 CLB Cartridge Kit, 28 CLB Cover CDU Key 0.0 CAJ Snap Ring 0.0 CEG Snap Ring 0.0 CLA Screw CBN Shaft Seal 0.03 CEF Shaft, 7/8" Straight.3 CBF Shaft, SAE B - 7/8" - 3 Toothe Spline.8 CAM Washer

62 Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 2", -/4". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 544 Replacement Parts: page 48 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Vickers Model See Note Above Note Above Shaft Displ Ring Size CMD B 35VQ2A-A20 4 Tooth SAE C CMD B 35VQ2A-A20 4 Tooth SAE C CMD B 35VQ2A-B20 4 Tooth SAE C CMD B 35VQ2A-B20 4 Tooth SAE C CMD B 35VQ2A-C20 4 Tooth SAE C CME B 35VQ2A-C20 4 Tooth SAE C CMD B 35VQ2A-D20 4 Tooth SAE C CME B 35VQ2A-D20 4 Tooth SAE C CME B 35VQ2A-A20 -/4 Stright CME B 35VQ2A-A20 -/4 Stright CME B 35VQ2A-B20 -/4 Stright CME B 35VQ2A-B20 -/4 Stright CME B 35VQ2A-C20 -/4 Stright CME B 35VQ2A-C20 -/4 Stright CME B 35VQ2A-D20 -/4 Stright Position C 90 C C Rot. C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 44

63 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME B 35VQ2A-D20 -/4 Stright CME B 35VQ25A-A20 4 Tooth SAE C CME B 35VQ25A-A20 4 Tooth SAE C CME B 35VQ25A-B20 4 Tooth SAE C CME B 35VQ25A-B20 4 Tooth SAE C CME B 35VQ25A-C20 4 Tooth SAE C CME B 35VQ25A-C20 4 Tooth SAE C CME B 35VQ25A-D20 4 Tooth SAE C CME B 35VQ25A-D20 4 Tooth SAE C CME B 35VQ25A-A20 -/4 Stright CME B 35VQ25A-A20 -/4 Stright CME B 35VQ25A-B20 -/4 Stright CME B 35VQ25A-B20 -/4 Stright CME B 35VQ25A-C20 -/4 Stright CME B 35VQ25A-C20 -/4 Stright CME B 35VQ25A-D20 -/4 Stright CME B 35VQ25A-D20 -/4 Stright CME B 35VQ30A-A20 4 Tooth SAE C CME B 35VQ30A-A20 4 Tooth SAE C CME B 35VQ30A-B20 4 Tooth SAE C CME B 35VQ30A-B20 4 Tooth SAE C CME B 35VQ30A-C20 4 Tooth SAE C CME B 35VQ30A-C20 4 Tooth SAE C CME B 35VQ30A-D20 4 Tooth SAE C CME B 35VQ30A-D20 4 Tooth SAE C CME B 35VQ30A-A20 -/4 Stright CME B 35VQ30A-A20 -/4 Stright CME B 35VQ30A-B20 -/4 Stright CME B 35VQ30A-B20 -/4 Stright Position 90 C C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C C Max. PSI & Max

64 Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME B 35VQ30A-C20 -/4 Stright CME B 35VQ30A-C20 -/4 Stright CME B 35VQ30A-D20 -/4 Stright CME B 35VQ30A-D20 -/4 Stright CMD B 35VQ35A-A20 4 Tooth SAE C CMD B 35VQ35A-A20 4 Tooth SAE C CMD B 35VQ35A-B20 4 Tooth SAE C CMD B 35VQ35A-B20 4 Tooth SAE C CMD B 35VQ35A-C20 4 Tooth SAE C CMD B 35VQ35A-C20 4 Tooth SAE C CMD B 35VQ35A-D20 4 Tooth SAE C CMD B 35VQ35A-D20 4 Tooth SAE C CME B 35VQ35A-A20 -/4 Stright CME B 35VQ35A-A20 -/4 Stright CME B 35VQ35A-B20 -/4 Stright CME B 35VQ35A-B20 -/4 Stright CME B 35VQ35A-C20 -/4 Stright CME B 35VQ35A-C20 -/4 Stright CME B 35VQ35A-D20 -/4 Stright CME B 35VQ35A-D20 -/4 Stright CME B 35VQ38A-A20 4 Tooth SAE C CME B 35VQ38A-A20 4 Tooth SAE C CME B 35VQ38A-B20 4 Tooth SAE C CME B 35VQ38A-B20 4 Tooth SAE C CME B 35VQ38A-C20 4 Tooth SAE C CME B 35VQ38A-C20 4 Tooth SAE C CME B 35VQ38A-D20 4 Tooth SAE C CME B 35VQ38A-D20 4 Tooth SAE C CME B 35VQ38A-A20 -/4 Stright Position 90 C 90 C C 90 C C 90 C C 90 C Rot. C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 46

65 ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 800 Vickers 35VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CME B 35VQ38A-A20 -/4 Stright CME B 35VQ38A-B20 -/4 Stright CME B 35VQ38A-B20 -/4 Stright CE VQ38A-C20 -/4 Straight CME B 35VQ38A-C20 -/4 Stright CME B 35VQ38A-C20 -/4 Stright CME B 35VQ38A-D20 -/4 Stright Position inlet (C) 90 C 90 C CME B 35VQ38A-D20 -/4 Stright and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C Max. PSI & Max Indexes & Technical Information Miscellaneous Products Fluid Conveying 47

66 Single ydraulic Pumps Fixed Displacement Vickers 35VQ Series Vane Pumps To 800 Parts for Vickers 35VQ Vane Pumps Parts for Vickers 35VQ Vane Pumps Vickers Model Description CAD Bearing 0.50 CLB Body CLA Bolt CKA Cartridge Kit, CBP Cartridge Kit, CDX Cartridge Kit, CBP Cartridge Kit, CDX Cartridge Kit, CLB Cover CEG Key 0.04 CJX Snap Ring 0.0 CEG Snap Ring 0.02 CBN Shaft Seal 0.07 CEG Shaft, -/4" Straight 2.39 CEG /4" 4 Tooth 2/24DP Spline 2.3 CJX Washer 0.0 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 48

67 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Unless noted otherwise, all pumps have: SAE C Mounting Flange. SAE 4-Bolt Flange Ports: 3", -/2". Application Information: page 53 Specifications: page 54 Model Codes: page 542 Dimensions: page 545 Replacement Parts: page 53 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Pumps are available as shown in table. Additional configurations available for delivery in hours. See Model Codes page to select a different configuration. Items ending with "-B" are assembled and tested in-house using genuine Eaton/Vickers parts and are not painted. Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size Position Rot. CMD B 45VQ42AA20 4 Tooth SAE D CMD B 45VQ42AA20 4 Tooth SAE D C CMD B 45VQ42AB20 4 Tooth SAE D CMD B 45VQ42AB20 4 Tooth SAE D C CMD B 45VQ42AC20 4 Tooth SAE D CMD B 45VQ42AC20 4 Tooth SAE D C CMD B 45VQ42AD20 4 Tooth SAE D C CMD B 45VQ42AD20 4 Tooth SAE D C C CMD B 45VQ42AA20 -/4 Straight CMD B 45VQ42AA20 -/4 Straight C CMD B 45VQ42AB20 -/4 Straight CMD B 45VQ42AB20 -/4 Straight C CMD B 45VQ42AC20 -/4 Straight CMD B 45VQ42AC20 -/4 Straight C CMD B 45VQ42AD20 -/4 Straight C Max. PSI & Max

68 Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above CMD B 45VQ42AD20 -/4 Straight C CMD B 45VQ42A86A20 -/2 Straight CMD B 45VQ42A86A20 -/2 Straight CMD B 45VQ42A86B20 -/2 Straight CMD B 45VQ42A86B20 -/2 Straight CMD B 45VQ42A86C20 -/2 Straight CMD B 45VQ42A86C20 -/2 Straight CMD B 45VQ42A86D20 -/2 Straight CMD B 45VQ42A86D20 -/2 Straight C 90 C CMD B 45VQ47AA20 -/4 Straight CMD B 45VQ47AA20 -/4 Straight CMD B 45VQ50AA20 CMD B 45VQ50AA20 CMD B 45VQ50AB20 CMD B 45VQ50AB20 CMD B 45VQ50AC20 CMD B 45VQ50AC20 CMD B 45VQ50AD20 CMD B 45VQ50AD20 Vickers Model See Note Above Shaft Displ 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D Ring Size C 90 C CMD B 45VQ50AA20 -/4 Straight CMD B 45VQ50AA20 -/4 Straight CMD B 45VQ50AB20 -/4 Straight CMD B 45VQ50AB20 -/4 Straight CMD B 45VQ50AC20 -/4 Straight CMD B 45VQ50AC20 -/4 Straight CMD B 45VQ50AD20 -/4 Straight CMD B 45VQ50AD20 -/4 Straight Position C 90 C CMD B 45VQ50A86A20 -/2 Straight CMD B 45VQ50A86A20 -/2 Straight Rot. C C C C C C C C C C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 50

69 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 800 Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above CMD B 45VQ50A86B20 -/2 Straight CMD B 45VQ50A86B20 -/2 Straight CMD B 45VQ50A86C20 -/2 Straight CMD B 45VQ50A86C20 -/2 Straight CMD B 45VQ50A86D20 -/2 Straight CMD B 45VQ50A86D20 -/2 Straight C 90 C CMD B 45VQ57AA20 -/4 Straight CMD B 45VQ57AA20 -/4 Straight CMD B 45VQ57AB20 -/4 Straight CMD B 45VQ57AB20 -/4 Straight CMD B 45VQ57AC20 -/4 Straight CMD B 45VQ57AC20 -/4 Straight CMD B 45VQ57AD20 -/4 Straight CMD B 45VQ57AD20 -/4 Straight CMD B 45VQ60AA20 CMD B 45VQ60AA20 CMD B 45VQ60AB20 CMD B 45VQ60AB20 CMD B 45VQ60AC20 CE VQ60A-C20 CMD B 45VQ60AC20 CMD B 45VQ60AD20 CMD B 45VQ60AD20 Vickers Model See Note Above Shaft Displ 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE C 4 Tooth SAE D 4 Tooth SAE D 4 Tooth SAE D Ring Size C 90 C inlet (C) 90 C 90 C CMD B 45VQ60AA20 -/4 Straight CMD B 45VQ60AA20 -/4 Straight CMD B 45VQ60AB20 -/4 Straight CMD B 45VQ60AB20 -/4 Straight CMD B 45VQ60AC20 -/4 Straight CE VQ60A-C20 -/4 Straight Position inlet (C) Rot. C C C C C C C C C C C C C Max. PSI & Max

70 Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 800 CMD B 45VQ60AC20 -/4 Straight Pumps & Accessories Vickers 45VQ Vane Pumps For Mobile Applications igh Pressure / igh Speed Capability Vickers Part No. See Note Above Vickers Model See Note Above Shaft Displ Ring Size 200 CMD B 45VQ60AD20 -/4 Straight CMD B 45VQ60AD20 -/4 Straight C 90 C CMC B 45VQ60A86A20 -/2 Straight CJ VQ60A-86A20 -/2 Straight inlet (A) CMC B 45VQ60A86A20 -/2 Straight CMC B 45VQ60A86B20 -/2 Straight CMC B 45VQ60A86B20 -/2 Straight CMC B 45VQ60A86C20 -/2 Straight CMC B 45VQ60A86C20 -/2 Straight CMC B 45VQ60A86D20 -/2 Straight Position C CMD B 45VQ60A86D20 -/2 Straight C 800 and 00 PSI. Displacement: Cubic inches per revolution. Max. PSI & Max. : Based on using petroleum oil at 20 F / 00SUS and at 0 PSI inlet pressure. Minimum Speed: 600. Rot. C C C C C C Max. PSI & Max ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 52

71 ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Vickers 45VQ Series Vane Pumps To 800 Parts for Vickers 45VQ Vane Pumps Fluid Conveying Pneumatic Power & Control Miscellaneous Products Indexes & Technical Information Parts for Vickers 45VQ Vane Pumps Vickers Model Description CAK Bearing.02 CKF Body 9.74 CLA Bolt CE Cartridge Kit CLB Cartridge Kit - 47 CBP Cartridge Kit CKA Cartridge Kit CBP Cartridge Kit CLB Cover CBC Key 0.03 CLB Key CEG Snap Ring 0.03 CEZ Snap Ring 0.05 CBN Shaft Seal 0.06 CBE Shaft, -/4" Straight 3.35 CEG Shaft, -/4", 4 Tooth 2/24DP Spline 2.00 CLB Shaft, -/2" Straight CFA Washer

72 Single & Tandem ydraulic Pumps Fixed Displacement Vane Pumps Miscellaneous Single & Tandem Vane Pumps Mfg. (Model No.) Miscellaneous Single & Tandem Vane Pumps Mfg. Name CKK Vickers 4.65 SAE C Displ in³/rev Mount Shaft Ports Rot. Other Features -/2 Straight CJC Tooth (25VQTBS2A-2297CC-20L) Vickers 4.2 SAE B SAE B CEL Vickers 4.98 SAE C 4T SAE-C SAE 4-Bolt Flange, 3, -/2 SAE 4-Bolt Flange, 2-/2, C SAE 4-Bolt Flange, 3, C -/4 VMQ Series Single Pump, SAE-B Spline Thru-Drive Coupling VQ Series Tandem Pump, SAE-B Rear Pump Mount, SAE-B Spline Thru-Drive Coupling VQ Series Tandem Pump, SAE-B Rear Pump Mount, SAE-B Spline Thru-Drive Coupling ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 54

73 ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps aldex Barnes W900 Series Gear Pumps To 800 Up to 4000 PSI Up to 4000 Features: Through bore bushing type design constructed of high strength aluminum housings and cast iron end covers. Enhanced noise abatement with 3-tooth gears, superior trapping configuration and optimum gear profile. Efficiencies 90% overall, 98% volumetric, 92% mechanical. Application: Recommended for direct axial drive. For applications with radial and/or thrust loads, please contact us for application assistance. Pressure Limits: : (Varies with displacement. See table below). : 6 in. g vacuum to 29 PSI. Rated Speeds: Maximum speed varies with displacement (See table below). Minimum speed is 500 at maximum continuous pressure. Maximum System Temperature: 200 F continuous. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: ISO 4406 Cleanliness Level 8/4 or cleaner. Dimensions: page 546 Foot Brackets: page 84 Fluid Conveying aldex Barnes W900 Series Gear Pumps To 800 Up to 4000 PSI Up to 4000 CAK3 Barnes Model (W9A08R3B0N) Displacement PressureRating (Continuous) Max Speed in³/rev 4000 PSI Mtg Flange Shaft Ports Rotation SAE A Note: Minimum speed at Maximum Continuous Pressure is /4 St. SAE-2 Side, SAE-0 Side Other Features 8.00 Indexes & Technical Information Miscellaneous Products 55

74 Single ydraulic Pumps Fixed Displacement Gear Pumps ydreco 500K Series Gear Pumps To 800 Up to Up to 4000 Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : (Varies with displacement. See table below). : 5 in. g vacuum to 50 psi. pressures over 50 psi require a case drain line be installed. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum pump life. Dimensions: page 547 Foot Brackets: page 84 ydreco 500K Series Gear Pumps To 800 Up to Up to 4000 ydreco Model Displacement PressureRating Max Speed.80 in³/rev CAK82 50KC3AAB in³/rev CAK92 55KC3AAB 3200 Note: Minimum speed under load is Mtg Flange Shaft Ports Rotation SAE A SAE A 5/8 St. x 2.25 Long 5/8 St. x 2.25 Long 3/4 NPT Side & Rear (Side Ports Plugged) 3/4 NPT Side & Rear (Side Ports Plugged) Bi-Rot. Bi-Rot. Other Features Shielded Outboard Bearing Shielded Outboard Bearing ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 56

75 Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps ydreco 500M Series Gear Pumps To 800 Up to Up to 3200 Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high inlet pressures with no case drain. Pressure Limits: :. : 5 in. g vacuum to 2000 psi. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum pump life. Dimensions: page 549 Foot Brackets: page 84 ydreco 500M Series Gear Pumps To 800 Up to Up to 3200 ydreco Model Displacement PressureRating Max Speed in³/rev CAK78 506MC3EBB in³/rev CAK83 50MC3EBB in³/rev CAK88 52MC3EBB in³/rev CAK89 52MC3GBB 2000 Note: Minimum speed under load is Mtg Flange Shaft Ports Rotation SAE A SAE A SAE A 4-Bolt Foot Mount 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. 3/4 NPT Rear Ports Bi-Rot. Other Features Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing Shielded Outboard Bearing Indexes & Technical Information Parts for ydreco 500M Series Pumps Part Number Description CDK90 SKO362 Seal Kit for 500M Series Pumps

76 Single ydraulic Pumps Fixed Displacement Gear Pumps Eaton Series 26 Gear Pumps To 800 Up to Up to 3600 Features: 3-tooth gears minimize the flow ripple for reduced noise and vibration. Bearing lubrication system uses inlet oil instead of high pressure oil, improving volumetric efficiency. Innovative wear plate permits simple rotation change. Application: Rotation may be reversed by reconfiguring internal parts - no extra parts are required. Simply open the pump, switch the drive gear and idler gear, reposition the plug and reassemble. Side Load Limits - contact us for assistance. Pressure Limits: : Varies with displacement (See table below). : Maximum inlet vacuum at operating condition 6.0 In. g. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20 F. Maximum Continuous 220 F. Minimum Continuous Oil Viscosity 45 SSU. Dimensions: page 55 Foot Brackets: page 84 CJB79 CJB8 CJB83 CJB84 CEX65 CFD3 CJB85 CJM5 CFP92 C87 CJY29 CJB86 Eaton Series 26 Gear Pumps To 800 Up to Up to 3600 Eaton Model 2600-RZG RZC RZG RZJ RAF RZC RZE RZG RZC RZE 26006ZC RZC Displacement PressureRating Max Speed in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev Mtg Flange Shaft Ports Rotation SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A SAE A SAE A SAE A 3/4 St. x 2 inches long 3/4 St. x -/4 long SAE-2 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE A 5/8 St. SAE-2 Side, SAE-0 Side SAE A SAE A SAE A SAE A 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side Other Features C ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 58

77 ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Fixed Displacement Gear Pumps CJY3 CJB88 CJB89 CJY32 CJY34 CJY36 Eaton Series 26 Gear Pumps To 800 Up to Up to 3600 Eaton Model 26007ZC RZC RZE 2600-RZC 260-RZC 2602-RZJ Displacement PressureRating Max Speed.200 in³/rev in³/rev in³/rev 2850 PSI in³/rev 3000 PSI in³/rev 3000 PSI in³/rev 950 PSI CJD ZC.870 in³/rev Note: Minimum speed at rated pressure is 750. Mtg Flange Shaft Ports Rotation SAE A SAE A SAE A SAE A SAE A SAE A SAE A 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long 3/4 St. x -/4 long SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-6 Side, SAE-0 Side SAE-2 Side, SAE-0 Side SAE-6 Side, SAE-0 Side Other Features C C 6.8 Fluid Conveying Miscellaneous Products Eaton L2 Series Gear Pumps To 800 Up to 3600 PSI Up to 3500 Pressure Limits: : Varies with displacement (See table below). : Maximum inlet vacuum at operating condition 6.0 In. g. Rated Speeds: Varies with displacement (See table below). Operating Temperatures: Minimum Operating -20 F. Maximum Continuous 225 F. Dimensions: page 552 Foot Brackets: page 84 Indexes & Technical Information CJX97 CJX98 Eaton L2 Series Gear Pumps To 800 Up to 3600 PSI Up to 3500 Eaton Model 2550-RSC RSA Displacement PressureRating Max Speed.55 in³/rev 3600 PSI in³/rev 3600 PSI Mtg Flange Shaft Ports Rotation SAE B SAE B 7/8 Straight 3 Tooth SAE B SAE-20 Side, SAE-2 Side SAE-20 Side, SAE-2 Side Other Features

78 Single ydraulic Pumps Fixed Displacement Gear Pumps CJY 25504SC 2.33 in³/rev 3600 PSI in³/rev 3600 CJY RSC PSI Note: Minimum speed at rated pressure is 750. SAE B 7/8 Straight Pumps & Accessories Eaton L2 Series Gear Pumps To 800 Up to 3600 PSI Up to 3500 Eaton Model Displacement PressureRating Max Speed 800 Mtg Flange Shaft Ports Rotation SAE B 7/8 Straight SAE-20 Side, SAE-2 Side SAE-20 Side, SAE-2 Side C Parts for Eaton L2 Series Gear Pumps Part Number Description CJX Seal Kit for Plain Pump 0.20 Permco Box Pumps For PTO Applications To Other Features Features: Sized to interchange with Muncie PTO pumps (See table below for Muncie numbers). Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: Pumps are stocked with Permco's "Continental Shaft" (Shaft can be changed without pump disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. All pumps have both side and rear ports (The 2 unused ports need to be plugged). All pumps are bi-rotational and may be used as bi-rotational motors (Case drain is drilled and plugged for use as a motor). Pressure Limits: :. : Not to exceed 0 in. g vacuum at 200, 7 in. g vacuum at 800, or a positive pressure greater than 20 PSI. Rated Speeds: Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 553 Foot Brackets: page 84 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 60

79 ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Fixed Displacement Gear Pumps CDG94 CDG95 CDG96 Permco Box Pumps For PTO Applications To Permco Model PEK0C PEK5C PEK20C CDG97 PEL7C CDG98 PEL20C CDG99 PEL22C CD PEL25C Displacement PressureRating Max Speed in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev Mtg Flange Shaft Ports Rotation 3.5 2/4-Bolt SAE B 2.5 2/4-Bolt SAE B /4-Bolt SAE B Bolt SAE B 4-Bolt SAE B 4-Bolt SAE B 4-Bolt SAE B 3 Tooth SAE B 3 Tooth SAE B NPT Side and Rear Bi-Rot. NPT Side and Rear Bi-Rot. 3 Tooth SAE B -/4 NPT Side, NPT Rear Bi-Rot. 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B -/4 NPT Side and Rear Bi-Rot. -/4 NPT Side and Rear Bi-Rot. -/4 NPT Side and Rear Bi-Rot. -/2 NPT Side, -/4 NPT Rear Bi-Rot. Other Features Replaces Muncie PK8 Replaces Muncie PK3 Replaces Muncie PK7 Replaces Muncie PL9 Replaces Muncie PL23 Replaces Muncie PL25 Replaces Muncie PL Indexes & Technical Information Miscellaneous Products Fluid Conveying 6

80 Single ydraulic Pumps Fixed Displacement Gear Pumps Miscellaneous Single Gear Pumps Mfg. Mfg. Name CAK60 43A-F36 ydreco.36 CFF44 43A-F37 ydreco.36 CJP97 CJJ48 CG65 CGG92 P257A367SPLZA5- (P257A367SPLZA5-6) P5000C53ADXK25 (P5000C53ADXK25-4) (P5000C53ADZK25-4) P55A224AAXQ22- (P55A224AAXQ22-5 4) Permco 3.86 Permco 6.43 Permco 6.43 Permco 5.70 CKM88 P55A23AAZA25- Permco 8.79 Miscellaneous Single Gear Pumps Displ in³/rev Mount Shaft Ports Rot. Other Features SAE-A- SAE-A- SAE-C 4-Bolt SAE-B 4-Bolt SAE-B 4-Bolt SAE-B 2/4-Bolt SAE-B- 4-Bolt 5/8 Straight --/2 NPT x, SAE-0 -/2", /2-4 Long, NPT Tank Woodruff Port Key 5/8 Straight --/2 NPT x, SAE-0 -/2", /2-4 Long, NPT Tank Woodruff Port Key 4T SAE-C 3T SAE-B -/4 NPT Side C Bi-Rot Integral Relief Valve, Tach Drive Integral Relief Valve, Tach Drive With outboard bearing, cast iron design, sleeve bearings With outboard bearing, cast iron design, roller bearings 3T SAE-B SAE-20 Side Bi-Rot With outboard bearing, cast iron design, roller bearings 3T SAE-B 3T SAE-B -/2 NPT Side & Rear -/2 NPT, -/2 NPT Bi-Rot Bi-Rot ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 62

81 ydraulic Power & Control Pneumatic Power & Control Pumps & Accessories Single ydraulic Pumps Variable Displacement Vickers PVE Series Piston Pumps To 800 Vickers PVE Piston Pumps For Mobile Applications Pressure Limits: : (Varies with displacement. See table below). Case: 5 PSI. : 5 in. g vacuum to 30 PSI. Rated Speed: Sizes 9 & 2: 5 in. g, 0 psig, 5 psig. Size 2: 0 psig. For overspeed limits contact us for details. Seals: Viton standard. Recommended Filtration: ISO level 8/6/4 (<), level 7/5/3 ( PSI). Recommended Fluid Viscosity: SSU (Running). System Temperature: 0 F to 50 F (Optimum Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J83FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 56 Foot Brackets: page 84 Miscellaneous Products Indexes & Technical Information Fluid Conveying Vickers Part No. CJV Vickers PVE Piston Pumps For Mobile Applications Vickers Model PVE9AR08AA0B 200A0000C D0A Displacement & Pressure Rating 2.50 in³/rev Control Pressure Comp Load Sense Mounting Flange Shaft Other Features SAE B-B 5T SAE B-B Rotation, Side SAE-24 SAE-6, Top SAE-0 Case Drain, Compensator Setting, 60 PSI Load Sense Bias Setting with Bleed-Down Orifice Parts for Vickers PVE Pumps Part Number Description CKF Rotating Group, Model CKF Rotating Group, Model CKA Wafer Plate, C Rotation, Model

82 Single ydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 800 Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 800 Capability PVQ piston pumps are quiet, in-line, variable displacement units with pressure compensator and/or flow compensator (load-sense) controls. These pumps operate at quietness levels that meet today's demanding industrial conditions. Pressure Limits: : (Varies with displacement. See table below). Case: 5 PSI. : 5 in. g vacuum to 30 PSI. Rated Speed: 800. Seals: Viton standard. Recommended Filtration: ISO level 8/6/4 (<), level 7/5/3 (2000-). Recommended Fluid Viscosity: SSU (Running), 2300 SSU Maximum at Startup. System Temperature: 0 F to 50 F (Optimum Range), 0 F to 80 F (Extreme Range). Note: Ratings based on using anti wear hydraulic fluid or automotive type crankcase oil designations SC, SD, SE or SF per SAE J83FEB80. For information on use with fire resistant fluids, contact us for assistance. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 564 Foot Brackets: page 84 Vickers PVQ Piston Pumps For Industrial Applications Low Noise / 800 Capability Vickers Vickers Model CJR PVQ0-A2R-SES- 20-C2-2 CJR PVQ20-B2R-SES- 2-C2-2 CJV PVQ32-B2R-SES- 2-C4-2 Displacement & Pressure Rating 0.64 in³/rev.29 in³/rev 2.0 in³/rev 800 Control See Below 4.98 C2 0.0 C C4 Mounting Flange Shaft Other Features SAE A SAE B SAE B 3/4 Straight 7/8 Straight 7/8 Straight Rotation, SAE-2 Rear Main Ports, SAE-6 Case Drain Rotation, SAE-2 Rear Main Ports, SAE-8 Case Drain Rotation, SAE-2 Rear Main Ports, SAE-8 Case Drain CM7 Control: Pressure Compensated ( PSI range, set 000 PSI) C2VB Control: Pressure Compensated (350- range, set ) and Load Sensing ( PSI differential range, set at 60 PSI), with Bleed-Down orifice C2 Control: Pressure Compensated (350- range, set ) C9 Control: Pressure Compensated (350- range, set 2850 PSI) C4 Control: Pressure Compensated (350- range, set ) ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 64

83 ydraulic Power & Control Single ydraulic Pumps Variable Displacement Vickers PVQ Series Piston Pumps To 800 Parts for Vickers PVQ Piston Pumps Part Number Description CCB Standard Buna-N Seal Kit for PVQ0/3 Models 0.08 CDX Standard Buna-N Shaft Seal for PVQ40/ CBM Standard Buna-N Shaft Seal for PVQ20/32 Models 0.05 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control 65

84 Single ydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 800 Eaton Medium Duty Piston Pumps For Mobile Applications igh Pressure / igh Speed Capability Features: Compact, lightweight aluminum housing. Continuous Rated Pressure:. Maximum Intermittent Pressure: 4000 PSI for.6 in³ and 2.32 in³ models, 3800 PSI for 2.77 in³ models, 4500 PSI for 4.2 in³ models. Continuous Allowable Case Pressure: 25 PSI. Maximum Continuous Vacuum: 4 in. g. for.6 in³ models, 3 in. g. for 2.32 in³ models, 2 in. g. for 2.77 and 4.2 in³ models, Temperature Limits: -20 F to 225 F. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 556 Foot Brackets: page 84 Eaton Medium Duty Piston Pumps For Mobile Applications igh Pressure / igh Speed Capability CJM62 Eaton Part No RCA CKK R CKC97 CBY63 CBY64 CKD RBB RBT 70523AB RAB Displacement & Speed Rating.6 in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev Control Pressure Compensated Pressure Compensated Pressure Compensated Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Mounting Flange Shaft Other Features SAE A SAE A SAE A SAE BB 2-4-Bolt SAE C 2-4-Bolt SAE C 3/4 Rotation, Rear Ports (SAE-4, Straight SAE-2 ), SAE-6 Case Drain, 3000 PSI Compensator Setting (Adjustable) 9T SAE Rotation, Rear Ports (SAE-4, A SAE-2 ), SAE-6 Case Drain, 3000 PSI Compensator Setting (Adjustable) 9T SAE Rotation, Rear Ports (SAE-2, A SAE-0 ), SAE-6 Case Drain, 2800 PSI Compensator Setting (Adjustable) Rotation, Rear Ports (SAE-20, 3T SAE-6 ), SAE-6 Case Drain, 3000 SAE B PSI Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) 4T SAE C 4T SAE C C Rotation, Side Ports (2 Inch Code 6 Flange, Inch Code 6 Flange ), SAE-0 Case Drain, Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) Rotation, Side Ports (2 Inch Code 6 Flange, Inch Code 6 Flange ), SAE-0 Case Drain, Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Non-adjustable) ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 66

85 ydraulic Power & Control Pneumatic Power & Control Single ydraulic Pumps Variable Displacement Eaton Medium Duty Piston Pumps To 800 Parts for Eaton Medium Duty Piston Pumps Part Number Description CFA Seal Kit for Models and CKC Seal Repair Kit, Models CKD Seal Repair Kit, Model CJS Seal Repair Kit, Model CJX Shaft Seal, Model CJX Shaft Seal, Model CJX Shaft Seal, Model Indexes & Technical Information Miscellaneous Products Fluid Conveying 67

86 Single ydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 800 Eaton 420 Mobile Piston Pumps igh Pressure / igh Speed Capability Pumps & Accessories Eaton s 420 Series mobile pumps are open circuit, axial piston designs with displacements of 2.50 in³/rev, 3.00 in³/rev, 3.80 in³/rev and 4.88 in³/rev for operating speeds up to 2,650 rpm. They are available with a variety of control options to match their performance to a broad range of mobile applications. Features: ighly efficient pump controls Strong, field-proven rotating group Saddle-type swashplate with steel-backed polymer bearings and a pressure lubrication passage to reduce wear Stiff swashplate reduces deflection, allows for evenly loaded bearings & extends unit life Single control piston reduces forces acting on swashplate & reduces package size Bimetal timing plate improves pump filling characteristics which reduces fluid-borne noise and extends pump life. Pressure Ratings: 2.50 in³/rev thru 3.80 in³/rev Models: 4060 psi Continuous, 4600 psi Intermittent, 5000 psi Peak in³/rev Models: 3050 psi Continuous, 3335 psi Intermittent, 3625 psi Peak. Speed Ratings: 2.50 in³/rev & 3.00 in³/rev Models: psig, in.g, psig, 3600 rpm Max Standby in³/rev Models: psig, in.g, psig, 3600 rpm Max Standby in³/rev Models: psig, in.g, (N/A) 5 psig, 3600 rpm Max Standby. Note: All models have a 600 Minimum Speed. Pressure: 0 PSIG Rated, 5 in.g Minimum, 50 PSIG Maximum. Case Pressure: 5 psig Maximum Continuous, 30 psig Maximum Intermittent, 75 psig Peak. Operating Temperature: 200 F Rated, -35 F Minimum, 220 F Maximum. Recommended ydraulic Fluid: Use antiwear hydraulic oil, or automotive type crankcase oil (designations SC, SD, SE or SF) per SAE J83 FEB80. ydraulic Fluid Viscosity: 80 to 88 SSU Recommended Operating Range, 92 SSU Maximum Continuous, 9720 SSU Maximum at Startup. Recommended Filtration: ISO 4406 Cleanliness Level 2/8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the pump must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Dimensions: page 557 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 68

87 Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Single ydraulic Pumps Variable Displacement Eaton 420 Series Mobile Piston Pumps To 800 CZ85 CKG78 CKK35 CKA62 CKA64 CKA63 CKA65 Eaton 42AK00694A 42AK00694B 42AK0292B 42AK0039B 42AK00393B 42AK00392B 42AK00394B Eaton 420 Mobile Piston Pumps igh Pressure / igh Speed Capability Displacement & Pressure Rating 2.50 in³/rev 4060 PSI 2.50 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 3.80 in³/rev 4060 PSI 4.88 in³/rev 3050 PSI Control Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Pressure Compensated Load Sense Mounting Flange Shaft Other Features SAE B SAE B SAE BB SAE BB 2/4-Bolt SAE C 2/4-Bolt SAE C 2/4-Bolt SAE C Rotation, Code 6 Flange Rear Ports 2" ", Top SAE-2 Case 3T Drain, SAE-4 Load Sense, SAE B Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Adjustable), External Manual Stroke Adjustment, Standard Polyacrylate Shaft Seal 3T SAE B 5T 5T 4T SAE C 4T SAE C 4T SAE C Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3050 PSI Compensator Setting (Adjustable), 200 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 2850 PSI Compensator Setting (Adjustable), 455 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal, External Manual Stroke Adjustment Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Standard Polyacrylate Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, 3550 PSI Compensator Setting (Adjustable), 290 PSI Load Sense Bias (Adjustable), Aux Rear Mount SAE B 2 Bolt 5T Spline, Single Viton Shaft Seal Rotation, Code 6 Flange Side Ports 2" ", Top SAE-2 Case Drain, SAE-4 Load Sense, Compensator Setting (Adjustable), 45 PSI Load Sense Bias (Adjustable), Single Viton Shaft Seal Indexes & Technical Information 69

88 Double ydraulic Pumps Fixed Displacement Vickers V200 Series Vane Pumps To 800 Vickers V200 Double Vane Pumps For Industrial & Mobile Applications Double pumps provide a single power source capable of serving two separate hydraulic circuits, resulting in a more compact, simple installation. Features: Vickers balanced vane construction. Buna-N seals standard. Shaft rotation can be changed by changing the assembly of internal parts. Ports: : -/2 inch Code 6 Flange. Front Pump (Shaft End) : SAE-6 Straight Thread. Rear Pump (Cover End) : SAE-8 Straight Thread. Application Information: page 53 Dimensions: page 536 Foot Brackets: page 84 Pumps are stocked as shown in table. ANY outlet position and rotation is available for same-day shipment. Vickers V200 Double Vane Pumps For Industrial & Mobile Applications Vickers Part No. Vickers Model Shaft CZV V200-F6S2S-AA -2L 3 Tooth SAE B Mtg Flange Displ Front Rear SAE B Ring Size 200 Front Rear 800 Front Rear Port Loc Front Rear 6/2 9.0/3.0 A/A Max PSI Front Rear Max Rot C Note: 800 and 00 PSI. Displacement: Cubic inches per revolution. Max PSI & based on using petroleum oil at 20 F and at 0 PSI inlet pressure. Min speed: 600. Vickers V200 Double Vane Pumps Replacement Parts List Part Number Description CCC Cartridge Kit, Cover End, Ring Size 0.3 CCC Cartridge Kit, Cover End, Ring Size CCC Cartridge Kit, Cover End, Ring Size CCC Cartridge Kit, Cover End, Ring Size CCC Cartridge Kit, Cover End, Ring Size CCC Cartridge Kit, Cover End, Ring Size CCC Cartridge Kit, Cover End, Ring Size CAA Screw for bolting on Cover End, Ring Sizes 06 & 07, (4) required 0.2 CCC Seal Kit, Buna-N 0.09 CBD Shaft Seal, Buna-N 0.04 CDU Shaft Key, 3/6 x -/4 0.0 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 70

89 Double ydraulic Pumps Fixed Displacement Miscellaneous ydraulic Power & Control Miscellaneous Double Vane Pumps Fluid Conveying Pneumatic Power & Control CE65 Mfg. (Model No.) (2520V2A4-BB22R) Mfg. Name Vickers CKK Vickers CKK Vickers CKK Vickers CKK Vickers Miscellaneous Double Vane Pumps Displ in³/rev Front Rear Mount Shaft Ports Rot. 4.0 Front 2.80 Rear 2.75 Front.96 Rear 6.83 Front 4.33 Rear 6.83 Front 4.33 Rear 8.54 Front 6.83 Rear SAE B SAE B SAE C SAE C SAE C 7/8 Straight 5T SAE-BB -/4 Straight -/4 Straight -/2 Straight SAE 4-Bolt Flange, 2-/2, s Front 3/4 Rear SAE 4-Bolt Flange, 3, s Front Rear SAE 4-Bolt Flange, 3, s -/4 Front Rear SAE 4-Bolt Flange, 3, s -/4 Front Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear C C Other Features V Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump Indexes & Technical Information Miscellaneous Products CJM66 CJM (VMQ24535S2525B0000A Vickers AADCANL00A032) (VMQ24535S2525B0000A Vickers AABBANR00A032) CKK Vickers CJD62 CBP94 C36 C (VMQ24535S402B0000A Vickers AABBANR00A032) (2520VQ2A-DD20) F (4520VQ-60A8-86AD-20L) (4520VQ60A8-86AA20) Vickers Vickers Vickers 3.2 Front 7.63 Rear 3.2 Front 7.63 Rear 4.65 Front 4.88 Rear 8.54 Front 6.83 Rear 2.45 Front 2.22 Rear.80 Front.67 Rear.80 Front.67 Rear SAE C SAE C SAE C SAE C -/2 Straight -/2 Straight -/2 Straight -/2 Straight 3 Tooth SAE B SAE B SAE C SAE C -/2 Straight -/2 Straight SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front Rear SAE 4-Bolt Flange, 4, s -/2 Front -/4 Rear SAE 4-Bolt Flange, 2-/2, s Front 3/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front 3/4 Rear SAE 4-Bolt Flange, 3-/2, s -/2 Front 3/4 Rear C C VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VMQ Series Double Pump VQ Series Double Pump VQ Series Double Pump VQ Series Double Pump

90 Double ydraulic Pumps Fixed Displacement Miscellaneous Parts for Miscellaneous Double Fixed Vane Pumps Part Number Description CKF V2020 Series, Seal Kit 0. CAA VQ Series, Bearing for 2520VQ 0.3 CBP VQ Series, Cartridge Kit Cover End for **20VQ**, Ring Size 5.02 CCB VQ Series, Seal Kit for 2520VQ, Std Single Seal, Buna-N 0.5 CDZ VQ Series, Seal Kit for 3525VQ, Std Single Seal, Buna-N 0.7 CEU VQ Series, Seal Kit for 4535VQ, Optional Double Seal, Buna-N 0.2 CB VQ Series, # 3T SAE-B Shaft for 2520VQ.4 CEF VQ Series, # 4T SAE-C Shaft 4535VQ 3.8 CKF VQ Series, Shaft Seal Kit, Single Shaft Seal, 3520VQ 0.7 CAK V Series, Bearing for 45**V.02 CKF V Series, Body Kit, 4520V 9.74 CEG V Series, Cartridge Kit Shaft End for 3520V-38*-22, Ring Size CCB V Series, Seal Kit for 2520V7, Buna-N 0. CEG V Series, Snap Ring for 3525V 0.02 Miscellaneous Double Gear Pumps CZT99 Mfg. Model RBN (ACMAR049904AC A00000B0B) Mfg. Name Eaton Miscellaneous Double Gear Pumps Displ in³/rev Front Rear Mount Shaft Ports Rot Front 0.66 Rear SAE A 3/4" Straight SAE-20 SAE-0 s Other Features Longer Slip-Fit Key 9.78 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 72

91 ydraulic Power & Control Pumps & Accessories Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Introduction to Dump Pumps Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control In applying the Permco Dump Pump, an understanding of the 2ine and 3ine circuits is essential for proper operation and maximum unit life. 2ine Operation: In the 2ine Operation, one line is connected from the oil tank to the inlet of the pump, and one line is connected from the cylinder port of the valve to the cylinder. With the pump engaged and the valve spool in the neutral position, oil will recirculate inside the unit. It has been determined through testing that the raise in temperature per every minute of operation in this mode is 7-/2 F. If operation is allowed to continue beyond the recommended 5 minute time interval, a reduction in clearances of the rotating group due to excessive heat and subsequent expansion will occur. The result may lead to the unit locking up and premature failure of the drive shaft or other internal components. 3ine Operation: In the 3ine Operation, one line is connected from the oil tank to the inlet of the pump, one line is connected from the cylinder port of the valve to the cylinder and one line is connected from the pump's return port back to the oil tank. A metal sleeve is inserted into the inlet port of the valve which diverts flow back to tank from either the cylinder retracting or from the valve spool being in neutral. eating of the oil is reduced with a 3ine circuit, but is not eliminated. 0 minutes is the maximum recommended time to allow the pump to be engaged and the valve spool in neutral with a 3ine circuit. CAUTION: Operation with the 3ine Sleeve installed in a 2ine application is potentially hazardous. Shaft Seal Life: Like any control valve, there are inherent pressure drops within the dump pump due to internal core configurations. During cylinder retraction, fluid velocities may increase to a point that excessive back pressures may be seen at the pump shaft seal area. For this reason, Permco installs high pressure motor shaft seals in all dump pump units to prevent premature shaft seal failure. It is also suggested that movement of the valve spool from the neutral to the raise position in rapid succession be avoided as this may also contribute to the premature failure of the shaft seal. 73

92 Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks Features: Rugged cast iron, roller bearing pump construction. igh strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 00% factory tested. -/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout device preventing accidental lowering of the dump body. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2ine and 3ine Operation. Pressure Limit:. Rated Speed: Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 554 Permco DM400 Series Dump Pumps For Light & Medium Duty Dump Trucks Permco Model Mount CCN69 DMD ZL-200 CCN70 DMR40020ZL200 Direct Remote Displacement PressureRating Max Speed in³/rev in³/rev Circuit Type Remote Mount Valve Location Direct Mount Rotation Relief Setting (PSI) 2.5 3ine -- C ine Left Side Other Features Replaces Commercial G L Replaces Commercial G Note: To convert a 3ine model for use in a 2ine circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 74

93 Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Dump Pumps Pump/Valve Assemblies For Dump Trucks & Trailers Permco DMD/DM640 Series Dump Pumps For Medium & eavy Duty Dump Trucks Features: Rugged cast iron, roller bearing pump construction. igh strength alloy steel gear and shaft set. Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges. 00% factory tested. -/4 NPT inlet port, 3/4 NPT pressure port, 3/4 NPT return port (for 3rd line). Built in direct acting relief valve set at factory provides protection to both the pump and to the cylinder. Manual Shift standard. Built-in load check. Neutral Lockout safety cap for use with pull-out cable. 2 extra long studs for easy installation of pump support bracket on Direct Mount models. Application: See Introduction To Dump Pumps at the beginning of this section for details on 2ine and 3ine Operation. Pressure Limit:. Rated Speed: Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions: page 555 Permco DMD/DM640 Series Dump Pumps For Medium & eavy Duty Dump Trucks Permco Model CCN68 DMD-25-Z-MS-20 CCN66 DM ZR-M-T-200 Mtg. Style Direct Remote Displacement PressureRating Max Speed in³/rev in³/rev Circuit Type Remote Mount Valve Location Direct Mount Rotation Relief Setting (PSI) ine -- C ine Right Side Other Features Replaces Commercial C02D25 Replaces Commercial C0D25 Note: To convert a 3ine model for use in a 2ine circuit, remove the metal sleeve in the inlet port of the valve, and install a 3/4 NPT plug in the return port Indexes & Technical Information 75

94 Refuse Pump System Permco Versa-Pak Refuse Pump System Permco Versa-Pak Refuse Pump System The Versa-Pak Refuse Pump System is available in two configurations. Dry Valve System: The Versa-Pak Valve in a Dry Valve System functions as a pressure compensated flow control. This limits flow to the hydraulic system allowing a preset amount to the system with the excess flow being returned to the tank at low pressure. This reduces repairs and downtime associated with overspeeding and overpressurizing the hydraulic system. The Dry Valve eliminates heat build-up in the hydraulic system associated with large flows when the system is not in use (Operator controls with switch or air valve). Unloader System: The Versa-Pak Valve in an Unloader System functions as a pressure compensated flow control and an unloader. The unloader diverts 00% of the flow back to tank at extremely low pressure when the hydraulic system is not required (Operator controls with switch). Versa-Pak Pump Features: 25% longer idler gear bearings to reduce shaft deflection and extend life. Sealed outboard bearing with protective shield to keep out contamination. Dowel pin construction. Solid one-piece gear and shaft set. Bleed valve built into rear cover (Dry Valve models). Versa-Pak Valve Features: Tamper-resistant flow regulation. Dry Valves: Easily operated by a dash mounted electric over air switch or manual air valve. Includes breather vent, tubing and fittings. Note: Please contact us for application assistance with the Versa-Pak System. Permco Model Description Versa-Pak Pump, Control Valve set at , CKN74 VP42-4COFLFC55 cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, -/4" Shaft, C Rot CDR58 VP42-4COFLDV Versa-Pak Pump, Dry Valve Function. 200, cu.in. per rev displacement, 4-Bolt SAE-C Mounting Flange, -/4" Shaft, C Rot CCC Solenoid, Unloader Function ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 76

95 ydraulic Power & Control Pneumatic Power & Control Power Steering Pumps Vickers VTM-42 Series Vane Pumps To 500 Vickers VTM-42 Power Steering Pumps Integral Control and Relief Valves Features: Integral flow control and relief valves eliminate the need for separate valves. Balanced vane design eliminates pressure-induced bearing loads to provide longer life. Vanes automatically compensate for any vane tip wear, providing like-new pump performance for the duration of the pump's life. Maximum Pressure:. Maximum 00 PSI: 7000 (0.2in³/rev-0.79in³/rev), 6000 (0.96in³/rev), 5000 (.8in³/rev). Maximum 500 PSI: 5000 (0.2in³/rev), 4500 (0.3in³/rev), 4200 (0.38in³/rev), 2800 (0.79in³/rev), 2600 (0.96in³/rev), 2500 (.8in³/rev). Maximum : 4250 (0.2in³/rev), 4000 (0.3in³/rev), 3800 (0.38in³/rev), 2800 (0.79in³/rev), 2300 (0.96in³/rev), 2000 (.8in³/rev). Miscellaneous Products Indexes & Technical Information Fluid Conveying Vickers VTM-42 Power Steering Pumps Integral Control and Relief Valves Vickers CBM R Vickers Model VTM NO-R-4 Mounting Flange Shaft Displ B.C. /2-20 UNF-2A Thd with Woodruff Key Ring Size Rate & Relief Setting (At 500 & 00 PSI) Other Features PSI No reservoir, No manifold, Rotation.62 77

96 and Pumps Doering Series 24 Cartridge and Pumps Cavity Required: C-0-2. Installation: Lubricate seals, using -/4 wrench torque to approximately 50 foot pounds. Socket may be rotated 360 for handle positioning. Doering Series 24 Cartridge and Pumps Doering Model Description CEN inch andle for 24 Series Pumps ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 78

97 ydraulic Power & Control Pneumatic Power & Control and Pumps Integrated ydraulics P Series Cartridge and Pump Features: Built in pressure and suction checks. Self contained cartridge element. Low leakage ball and seat design. Minimal effort required for plunger movement. Requires a machined C-0-2 cavity or housing for installation. Application: The P7 hand pump has been designed to be used on machines which require emergency release of brakes or for pilot supply for emergency lowering of access platforms. It can also be utilised in the lubrication circuits. Operation: Depressing the plunger will force oil out through a check valve and into the system. The plunger will then retract drawing oil into the chamber through a second check valve. Specifications: 0.08 cubic inch displacement. 725 psi maximum generated pressure. -22 to +94 F operating temperature range. 5 drops per minute max internal leakage. Based on oil temperature of 04 F and 50 SSU. Recommended Filtration Level: ISO level 8/3 or better. Installation: 30 ft-lbs torque cartridge into cavity. For compatible C-0-2 bodies see page 40 Fluid Conveying Miscellaneous Products Integrated ydraulics Part No. Integrated ydraulics P Series Cartridge and Pump Integrated ydraulics Model Body Seal Material CKA 40AA00034A P7-S None Nitrile 0.35 Indexes & Technical Information 79

98 Air-Operated Diaphragm Pumps Air-Operated Diaphragm Pumps Aro Air-Operated Diaphragm pumps offer several performance advantages over other pump types in fluid transfer applications. () When you close the fluid outlet, the pump stops. No movement, no wear, no overload, no heat buildup, no power consumption. (2) Variable flow rates are achieved by simply adjusting air pressure to the pump or by restricting the discharge line. (3) Positive priming provides easy start-ups. Internal fluid check valves are located close to the diaphragm chambers, assuring positive self-priming, even from a dry start. (4) Pumping efficiency remains constant since there are no rotors, gears, vanes or pistons to wear out. (5) Runs dry without damage. (6) No foaming or shearing of material. Process fluids enter and exit unchanged. (7) No lubrication is required so there is less maintenance. (8) Pumps are lightweight and portable and can be carried from job to job with ease. Features: Patented "Unbalanced" air valve design ensures pump will always resume pumping action when called on. Bolted construction for an improved seal and safer fluid handling. No rotating or sliding seals to leak or fail. Dimensions & Performance Curves: page 566 /4 Inch Ports 4.6 Capability Non-Metallic Wetted Parts Maximum Rate: 4.6. Displacement: 0.04 Gallons per Cycle. Maximum Operating Pressure: 00 PSI. Suspended Solids Capability: Clean fluids only. Maximum Dry Suction Lift: 20 ft. Fluid Ports: 3/8 NPT. /4 NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 /4 Inch Ports 4.6 Capability Non-Metallic Wetted Parts Aro Model Center Section Port Wetted End Seat Material Disk Check / Diaphragm CDG80 PD02P-APS-PTA Polypropylene Single In/Out Polypropylene Polypropylene Teflon /Santoprene 4.70 CDG8 PD02P-APS-PTT Polypropylene Single In/Out Polypropylene Polypropylene Teflon /Teflon 2.50 /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Maximum Rate: 3. Displacement: 0.04 Gallons per Cycle. Maximum Operating Pressure: 00 PSI. Suspended Solids Capability: 3/32 inch diameter. Maximum Dry Suction Lift: 0 ft. (Teflon fitted). Fluid Ports: /2 NPT. /2 NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Aro Model Air Motor Wetted Parts Check Valve Seats CBX J-3 Polypropylene Polypropylene Polypropylene Ball Check / Diaphragm Other Features Neoprene / Neoprene Single Piece Manifold 9.00 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 80

99 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Air-Operated Diaphragm Pumps /2 Inch Ports 3 Capability Non-Metallic Wetted Parts Aro Model Air Motor Wetted Parts CBX Polypropylene Polypropylene Polypropylene Nitrile / Nitrile 9.24 Service Kits & Parts for Aro /2 Inch Diaphragm Pumps Part Number Description CBW Service Kit, Air Motor 0.8 CBW Service Kit, Diaphragm Material, Neoprene 0.32 Inch Ports 35 Capability Metallic Wetted Parts Maximum Rate: 35. Displacement: 0.6 Gallons per Cycle. Maximum Operating Pressure: 20 PSI. Suspended Solids Capability: /8 inch diameter. Maximum Dry Suction Lift: 20 ft. (Rubber fitted). Fluid Ports: inch NPT. inch NPT. Air : /4 NPT. Recommended Filter/Regulator: page 758 Inch Ports 35 Capability Metallic Wetted Parts Aro Model Air Motor Wetted Parts Check Valve Seats Check Valve Seats Ball Check / Diaphragm Other Features Ball Check / Diaphragm Other Features CBX C Aluminum Aluminum Polypropylene Acetal / Buna-N 20.8 Service Kits & Parts for Aro inch Metallic Diaphragm Pumps Part Number Description CCB Ball, Acetal 0.0 CCB Diaphragm, Buna-N 0.50 CDT74 Y O-Ring, Nitrile, 3/32 x -9/6 OD 0.0 CBW C Service Kit, Diaphragm Material, Buna-N

100 Centrifugal Pumps Centrifugal Pumps for Agricultural Spraying ypro centrifugal pumps are ruggedly built for reliability in higher capacity spraying systems. They handle a broad spectrum of spraying solutions from liquid fertilizers to ag chemicals to wettable powders. ousings are available in cast iron and polypropylene (Polypropylene pumps are light weight and provide maximum resistance to corrosive chemicals and acid fertilizers). Impellers are balanced for smooth operation and are precision molded of tough plastic for excellent corrosion resistance. ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI Ratings: Max., PSI Max. Pressure, 40 F Max. Fluid Temperature. Features: ydraulic motor drive (for open and closed center systems) Model Ports: -/4 NPT, NPT. 9303C Model Ports: -/2 NPT inlet, -/4 NPT outlet. 9304C Model Ports: 2 NPT inlet, -/2 NPT outlet. ydraulic Motor Ports: /2 NPT Cast iron pump housing. Viton /Ceramic pump shaft seals standard (Buna-N/Ceramic and Viton /Silicon Carbide available). Double lip Teflon hydraulic motor shaft seal. ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI ypro Model ydraulic System Type CJN 9302ST-GM Stainless Pump Casing, Polypropylene Impeller Open & Closed Center ydraulic Motor Capacity 3 Seals Life Guard Silicon Carbide Performance At ydraulic Motor Capacity 00 0PSI 85 20PSI 67 30PSI 48 40PSI 22 50PSI 55 60PSI 6 70PSI 48 80PSI 33 90PSI 20 00PSI ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 82

101 ydraulic Power & Control Pneumatic Power & Control Centrifugal Pumps ypro 9300C Series ydraulic Motor Driven Centrifugal Pumps To 4 / 80 PSI ypro Model ydraulic System Type ydraulic Motor Capacity Seals CCC C-M4C Open & Closed Center 7 Viton /Ceramic CZT C-MC Open & Closed Center 3 Viton /Ceramic Performance At ydraulic Motor Capacity 0 0PSI 97 20PSI 92 30PSI 86 40PSI 77 50PSI 64 60PSI 48 70PSI 38 80PSI 4 90PSI 23 0PSI 0 20PSI 09 30PSI 07 40PSI 05 50PSI 04 60PSI 02 70PSI 96 80PSI 85 90PSI 76 00PSI 63 0PSI 33 20PSI 3 30PSI Indexes & Technical Information Miscellaneous Products Fluid Conveying 83

102 Pump Accessories Foot Brackets Vickers Foot Brackets (Cast Iron) Features: Can be used to mount pumps or motors having standard SAE-J 744 mounting flanges. Either pair of diametrically opposed holes may be used. Bolts are included. Material: Cast Iron. Vickers Foot Brackets (Cast Iron) Vickers Vickers Model Size Dimensions (inches) CBP87 A=5.3 B=2.75 C=6.00 D=3.00 E=5.00 F=.44 G=2.50 =.50 J=4.9 K= FB-A-0 SAE A L=.59 M=2.00 N=.50 P=3.253 Q=.69 R=3/8-6 S= CBP88 A=7.2 B=3.63 C=6.75 D=3.38 E=5.75 F=.44 G=2.88 =.50 J=5.75 K= FB-B-0 SAE B L=.59 M=2.00 N=.50 P=4.003 Q=.68 R=/2-3 S= CBP89 A=8.50 B=4.3 C=0.44 D=5.22 E=9.25 F=2.00 G=4.63 =.62 J=7.3 K= FB-C-0 SAE C L=.75 M=3.00 N=.68 P=5.003 Q=.75 R=5/8- S= ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 84

103 ydraulic Power & Control Water Pump Accessories Foot Valves, Strainers, Skimmers Foot Valves, Strainers and Skimmers Pneumatic Power & Control Model Type Foot Valves, Strainers and Skimmers Size (in) Description Mfg. Name CFJ25 DFVS35 Foot Valve 3 Threaded Type, Painted Dixon 8.08 CGA20 RS200 Round ole Strainer 2 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama.78 CDK RS-35 Round ole Strainer 3 Zinc Plated Steel, Pipe Threads (NPT) Dixon 2.00 CGA22 RS300 Round ole Strainer 3 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 3.08 CGA23 RS400 Round ole Strainer 4 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 2.90 CGA24 RS600 Round ole Strainer 6 Zinc Plated Steel, Straight Pipe Threads (NPSM) Kuriyama 6.04 Indexes & Technical Information Miscellaneous Products Fluid Conveying 85

104 ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Category Geroter Motors Charynn Series (Up to 4600 lb-in torque. Up to 00.) Geroler Motors Charynn J Series (Up to 743 lb-in torque. Up to 2458.) Charynn S Series (Up to 590 lb-in torque. Up to 963.) Charynn 2000 Series (Up to 8225 lb-in torque. Up to 042.) Charynn 4000 Series (Up to 0450 lb-in torque. Up to 868.) Charynn 6000 Series (Up to 6580 lb-in torque. Up to 866.) Charynn 0,000 Series (Up to lb-in torque. Up to 784.) Gear Motors Cross Manufacturing 40 Series ydreco 500K Series ydreco 500M Series Permco Box Motors Miscellaneous Gear Motors Vane Motors Vickers 25M through 50M Series (Up to 7500 lb-in torque. Up to 4000.) Piston Motors Eaton Medium Duty ydraulic Motor Accessories Overhung Load Adaptors ydraulic Motor Technical Information & Dimensions Charynn Series Charynn J Series Charynn S Series Charynn 2000 Series Charynn 4000 Series Charynn 6000 Series Charynn 0,000 Series Cross 40 Series ydreco 500K Series ydreco 500M Series Eaton Medium Duty Piston Motors Permco Box Motors Vickers 25M-50M Series Vickers M2U Series Page Indexes & Technical Information 86

105 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Series motors are economical, efficient, compact and powerful, and are designed for medium duty applications. These motors have the industry proven spool valve design combined with state-of-the-art gerotors. In addition, a wide variety of mounting flanges, shafts, ports and a low speed valving option provides design flexibility. Direction of shaft rotation and shaft speed can be controlled easily and smoothly throughout the speed range of the motor. Equipment can be driven direct eliminating costly mechanical components. Maximum Case Pressure: 500 PSI. Fluid Viscosity: Minimum viscosity (at operating temperature) should be the highest of the following: 00SUS or (20 x PSI)/ = SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 92 Dimensions & Technical Information: page 569 Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW Bolt in. Straight 7/8-4 St.Thd O-Ring.70 CFE Bolt in. Straight /2 NPT.63 CLW Bolt in. Straight 7/8-4 St.Thd O-Ring CFE Bolt in. Straight /2 NPT 0.9 CAG Bolt in. Straight 7/8-4 St.Thd O-Ring.75 CAG Bolt in. Straight /2 NPT.75 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT.25 CFE Bolt in. Straight /2 NPT 5.00 CFE Bolt in. Straight /2 NPT.20 CLW Bolt in. Straight 7/8-4 St.Thd O-Ring CJW Bolt in. Straight 7/8-4 St.Thd O-Ring 2.0 CAG Bolt in. Straight /2 NPT 2.25 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT.50 CJW Bolt in. Straight 7/8-4 St.Thd O-Ring 2.34 CAG Bolt in. Straight /2 NPT 2.00 CJW Bolt in. Straight 7/8-4 St.Thd O-Ring.50 CAG Bolt in. Straight /2 NPT 2.00 CLW Bolt in. Straight 7/8-4 St.Thd O-Ring CFE Bolt in. Straight /2 NPT 2.53 CFE Bolt in. Straight /2 NPT CLW Bolt in. Straight 7/8-4 St.Thd O-Ring CFE Bolt in. Straight /2 NPT 2.8 CFE Bolt in. Straight /2 NPT CGG Bolt in. Straight 7/8-4 St.Thd O-Ring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 87

106 ydraulic Motors & Accessories ydraulic Power & Control Pneumatic Power & Control Charynn Low-Speed igh-torque Motors Charynn Series Geroter Motors Up to 4600 lb-in Intermittent Torque, 00 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG Bolt in. Straight /2 NPT 3.25 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT 2.50 CAG Bolt in. Straight /2 NPT 3.50 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT 2.50 CAG Bolt in. Straight /2 NPT 4.00 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT 3.00 CAG Bolt in. Straight 7/8-4 St.Thd O-Ring 0.00 CAG Bolt in. Straight /2 NPT 4.42 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT 3.80 CAG Bolt in. Straight 7/8-4 St.Thd O-Ring 5.25 CAG Bolt in. Straight /2 NPT 5.50 CKY Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT 4.50 Fluid Conveying Miscellaneous Products Indexes & Technical Information Parts For Charynn Series Geroter Motors Part Number Description CAB Backup Ring, Series CAA Dust Seal, Series CAA Flange Seal, Series CAA Front Flange,, Series.83 CAA Front Flange,, Series CAA Front Flange, 4-Bolt, Series CAA Front Flange, 4-Bolt, -007 Series.0 CAA Front Flange, 4-Bolt, Series.08 CAA Front Flange, 4-Bolt, Series CAB Seal Kit, Buna-N, -005 Series 0.04 CAB Seal Kit, Buna-N, -007 Series 0.05 CAB Seal Kit, Buna-N, Series 0.05 CAA Shaft, Inch Straight with Woodruff key slot, Series CAA Shaft, SAE 6B, Series CAA Shaft Seal, Series CAA Shaft Seal, Series CAA Torx ead Capscrew, Series CAA Woodruff Key, Series

107 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent Charynn J Series motors pack a lot of power in a very small package. These motors feature a Geroler design, spool valving, high radial shaft load capability and case drain port. Maximum Case Pressure: 00 PSI (Without case drain). For continuous back pressure over 00 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 570 Seal Kit: Part number: Charynn J Series Geroler Motors Up to 743 lb-in Intermittent Torque, 2458 Intermittent Charynn Model Displ. (cu.in./rev) CAJ CJX CAJ CJX Mounting Flange Shaft Ports 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5 Bolt /4-28UNF 5/8 in. Straight 5/8 in. Straight 5/8 in. Straight 5/8 in. Straight 9/6-8 St.Thd. O-Ring Side Ports 9/6-8 St.Thd. O-Ring Side Ports 9/6-8 St.Thd. O-Ring End Ports 9/6-8 St.Thd. O-Ring Side Ports Special Features Case Drain 3/8-24 St.Thd., Low Gloss Black Paint Case Drain 3/8-24 St.Thd., Low Gloss Black Paint Case Drain 3/8-24 St.Thd. Case Drain 3/8-24 St.Thd., Low Gloss Black Paint ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 89

108 ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn S Series motors with Geroler offer the same advantage of low speed, high torque and compact size as the Series with geroter. In the Geroler, element precision machined rollers form the displacement chambers. The rollers provide support with rolling contact as the star rotates, minimizing friction and providing high efficiency, especially at start-up and at low speeds. Maximum Case Pressure: 500 PSI. Fluid Viscosity: 70 SUS at operating temperature. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Manifold Ported Motors: Base Block Mounting Kits page 92 Dimensions & Technical Information: page 57 Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.80 CFE Bolt in. Straight /2 NPT 5.27 CFE Bolt in. Straight /2 NPT 4.63 CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT 5.50 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.84 CAG Bolt in. Straight /2 NPT 5.00 CF Bolt in. Straight 7/8-4 St.Thd. O-Ring 5.67 CAG Bolt in. Straight /2 NPT 6.00 CKX Bolt in. Straight 7/8-4 St.Thd. O-Ring 4.62 CAG Bolt in. Straight /2 NPT 5.50 CFE Bolt in. Straight /2 NPT 5.87 CC Bolt in. Straight 7/8-4 St.Thd. O-Ring 6.05 CBN Bolt in. Straight /2 NPT 5.46 CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CFE Bolt in. Straight /2 NPT CFE Bolt in. Straight /2 NPT 5.97 CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CZZ Bolt in. Straight 7/8-4 St.Thd. O-Ring 7.02 CAG Bolt in. Straight /2 NPT 7.25 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring 2.00 CAG Bolt in. Straight /2 NPT 6.50 CLW Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT 7.55 CKZ Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT

109 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn S Series Geroler Motors Up to 590 lb-in Intermittent Torque, 963 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring 8.75 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT 8.50 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring 6.00 CAG Bolt in. Straight /2 NPT 7.75 CEL Bolt in. Straight 7/8-4 St.Thd O-Ring CAG Bolt in. Straight /2 NPT CKZ Bolt in. Straight 7/8-4 St.Thd. O-Ring Special Features CAG Bolt in. Straight /2 NPT 8.75 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT CJC Bolt in. Straight Manifold 20.0 CAG Bolt in. Straight 7/8-4 St.Thd. O-Ring CAG Bolt in. Straight /2 NPT Parts For Charynn S Series Geroler Motors Part Number Description CAB Backup Ring, S Series CAA Dust Seal, S Series CAA Flange Seal, S Series CAA Front Flange,, Series.83 CAA Front Flange,, S Series CAA Front Flange, 4-Bolt, Series.0 CAA Front Flange, 4-Bolt, S Series CAA Front Flange, 4-Bolt, Series.08 CAA Front Flange, 4-Bolt, S Series CAB Seal Kit, Buna-N, -007 Series 0.05 CAB Seal Kit, Buna-N, -008 Series 0.05 CAB Seal Kit, Buna-N, Series 0.05 CJC Seal Kit, Buna-N, contains poppet, -02 Series 0.05 CAA Shaft, Inch Straight with Woodruff key slot, S Series CAA Shaft, SAE 6B, S Series CAA Shaft Seal, S Series CAA Shaft Seal, S Series CAA Torx ead Capscrew, S Series CAA Woodruff Key, S Series ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 9

110 ydraulic Motors & Accessories ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn & S Series Base Block Mounting Kits Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control Charynn & S Series Base Block Mounting Kits Charynn Model Description CAJ /8-4 St.Thd. O-Ring Ports

111 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn 2000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: (Without case drain). For continuous back pressure over, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 575 Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CAG Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CEV Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CLA Bolt Magneto SAE C 4T 7/8-4 St.Thd. O-Ring Black Paint CAG Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 24. CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CJW Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CJW Bolt 32mm Straight G /2 BSP 2.50 CJW Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CJW Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart CJB Bolt SAE A -/4 in. Tapered 7/8-4 St.Thd. O-Ring 2.68 CAG Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CJW Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart CJW Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CL Bearingless None 7/8-4 St.Thd. O-Ring CJW Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 8.00 CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CJW Bolt SAE B SAE 6B 7/8-4 St.Thd. O-Ring CA Bearingless None 7/8-4 St.Thd. O-Ring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 93

112 ydraulic Motors & Accessories ydraulic Power & Control Pneumatic Power & Control Charynn Low-Speed igh-torque Motors Charynn 2000 Series Geroler Motors Up to 8225 lb-in Intermittent Torque, 042 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAG Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring 27.0 CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart CA Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CK Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring 2000 psi cross-over relief CGJ Bearingless None 7/8-4 St.Thd. O-Ring CLW Bolt SAE A in. Straight 7/8-4 St.Thd. O-Ring CJW Bolt SAE A in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CJW Bolt SAE A -/4 in. Straight -/6-2 St.Thd. O-Ring Ports 80 Apart CA Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring CA Bearingless None 7/8-4 St.Thd. O-Ring CJC Wheel Motor -/4 in. Tapered 7/8-4 St.Thd. O-Ring CA Bolt SAE A -/4 in. Straight 7/8-4 St.Thd. O-Ring CA Bolt SAE A SAE C 4T 7/8-4 St.Thd. O-Ring Fluid Conveying Miscellaneous Products Indexes & Technical Information Parts For Charynn 2000 Series Geroler Motors Part Number Description CAA Backup Ring, 2000 Series CAA Drive for 24 cu.in./rev, 2000 Series CAA Drive for 29.8 cu.in./rev, 2000 Series CAA Dust Seal, 2000 Series CJM Key for -/4 Tapered Shaft 0.03 CAA Nut for -/4 Tapered Shaft 0.3 CAB Seal Kit, Buna-N, Standard & Wheel Motors, Series 0.07 CAB Seal Kit, Buna-N, Bearingless Motors, -006 Series 0.04 CAB Seal Kit, Buna-N, Standard & Wheel Motors, -006 Series 0.07 CJL Seal Kit, Buna-N, Wheel Motors with Seal Guard, -006 Series 0.09 CAB Seal Kit, Viton, Standard & Wheel Motors, -006 Series 0.07 CAA Shaft & Bearing Kit, Inch Straight, 2000 Series CJS Shaft & Bearing Kit, inch 6B, -006 Series 3.50 CAA Shaft & Bearing Kit, -/4 Inch Straight, 2000 Series CAA Shaft & Bearing Kit, 4 Tooth, 2000 Series CAA Shaft & Bearing Kit, -/4 Inch Tapered, 2000 Series CAA Shaft Seal, 2000 Series CAB Wear Plate, 2000 Series

113 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn Delta Series Geroler Motors Up to 0,500 lb-in Intermittent Torque, 837 Intermittent The Delta motor provides torques up to 0,500 in-lbs. Eaton has packed this motor with many best in class features: the optimized geroler profile ensures smooth operation; the disc valve technology has the best performance and the bearing capacity is the highest in the industry for very demanding applications. Maximum Case Pressure: Fluid Viscosity: No less than 70 SUS at operating temperature. Recommended Fluids: Premium quality, anti wear type hydraulic oil. Recommended Filtration: Per ISO Cleanliness Code 20/8/3 Maximum Recommended Operating Temperature: 80 F Recommeded Break-In: Top assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: Charynn Delta Series Geroler Motors Up to 0,500 lb-in Intermittent Torque, 837 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CLB Wheel -/2" Straight 7/8" O-Ring Black Paint CLW Wheel -/4" Tapered 7/8" O-Ring ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 95

114 ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn 4000 Series Geroler Motors Up to 0450 lb-in Intermittent Torque, 868 Intermittent Charynn 4000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 500 PSI (Without case drain). For continuous back pressure over 500 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 580 Charynn 4000 Series Geroler Motors Up to 0450 lb-in Intermittent Torque, 868 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CEX Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJW Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJW Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring 38.0 CLW Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJL Bolt SAE B -5/8 in. Tapered -/6-2 St.Thd. O-Ring 4.0 CZV Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CA Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CA Bolt SAE B -5/8 in. Tapered -/6-2 St.Thd. O-Ring CA Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CLW Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring CJW Bolt SAE B -/4 in. Straight -/6-2 St.Thd. O-Ring Parts For Charynn 4000 Series Geroler Motors Part Number Description CAB Seal Kit, Rear, Buna-N, Standard & Wheel Motors, Series 0.04 CAB Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, Series 0.06 CAB Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -004 Series 0.05 CF Shaft & Bearing Kit, -/4 Inch Straight, 4000 Series CEZ Shaft & Bearing Kit, -5/8 Inch Tapered, 4000 Series

115 ydraulic Motors & Accessories Charynn Low-Speed igh-torque Motors Charynn 6000 Series Geroler Motors Up to 6580 lb-in Intermittent Torque, 866 Intermittent Charynn 6000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 000 PSI (Without case drain). For continuous back pressure over 000 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 583 Charynn 6000 Series Geroler Motors Up to 6580 lb-in Intermittent Torque, 866 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CJW Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CLW Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring CA Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring CJW Wheel Motor -3/4 in. Tapered -5/6-2 St.Thd. O-Ring CEV Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CLW Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C -/2 in. Straight -5/6-2 St.Thd. O-Ring CA Bolt SAE C SAE CC 7T -5/6-2 St.Thd. O-Ring Parts For Charynn 6000 Series Geroler Motors Part Number Description CFV Key for Tapered Shaft Models 0.07 CFV Key for Tapered Shaft, 6000 Series 0.07 CAB Seal Kit, Rear, Buna-N, Standard & Wheel Motors, -005 Series 0.05 CAB Seal Kit, Shaft, Buna-N, Standard & Wheel Motors, -005 Series 0.07 CK Shaft and Bearing Kit (-/2 inch Straight), 6000 Series 7.30 CFW Shaft & Bearing Kit, -3/4 Inch Tapered, 6000 Series ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 97

116 ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Charynn Low-Speed igh-torque Motors Charynn 0,000 Series Geroler Motors Up to lb-in Intermittent Torque, 784 Intermittent Charynn 0,000 Series motors feature a geroler displacement mechanism that provides high starting and running torque and smooth output shaft rotation even at very low speeds. A patented pressure-balanced, wear-compensated disc valve maintains minimal leakage as it distributes fluid to the geroler pockets. eavy duty roller bearings permit high radial loads, and are matched to the torque capability of the motor. In addition to motors featured in this catalog, a wide selection of shafts, mounting flanges, ports, and other optional features are available. Contact us for assistance. Maximum Case Pressure: 300 PSI (Without case drain). For continuous back pressure over 300 PSI, use an external case drain line. Install line so motor case remains full at all times. Fluid Viscosity: Minimum: 70 SUS at operating temperature. Recommended Range: SUS. Recommended Fluids: Premium quality, anti-wear type hydraulic fluid. Recommended Filtration: Per ISO Cleanliness Code, level 8/3. Maximum Recommended Operating Temperature: 80 F. Recommended Break-In: To assure best motor life, run motor for approximately one hour at 30% of rated pressure before application to full load. Be sure motor is filled with fluid prior to any load applications. Dimensions & Technical Information: page 586 Charynn 0,000 Series Geroler Motors Up to lb-in Intermittent Torque, 784 Intermittent Charynn Model Displ. (cu.in./rev) Mounting Flange Shaft Ports Special Features CAJ Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring CLW Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange CAJ Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring CAJ Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring 0.00 CJX Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange CJX Bearingless None -/4 Code 6 Split Flange CAJ Bolt SAE C 2-/4 in. Straight -5/6-2 St.Thd. O-Ring CLW Bolt SAE C 2-/4 in. Straight -/4 Code 6 Split Flange Parts For Charynn 0,000 Series Geroler Motors Part Number Description CY Front Thrust Bearing, 0,000 Series CEZ Geroler, 57.3 cu.in./rev, 0,000 Series CAA Seal Kit, Shaft, Buna-N, Series 0.07 CAA Seal Kit, Motor, Buna-N, Series 0.06 CZZ Shaft, 2-/4 Straight, 0,000 Series CY Thrust Washer, 0,000 Series CY Rear Thrust Washer, 0,000 Series CY Thrust Washer (Thin), 0,000 Series CZZ Wear Plate, 0,000 Series

117 ydraulic Motors & Accessories Gear Motors Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability Features: Improved gear tooth design and pressure-balanced loading plates provide for a high volumetric and overall efficiency, while operating at a low noise level. Bi-directional design using internal check valves. Die-cast aluminum alloy body and end covers. Sintered metal gears. ardened steel shaft. Pressure lubricated, Teflon impregnated sleeve bearings, Buna-N seals. Application: Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : Rated Working Pressure, 3500 PSI Maximum Shock Pressure. : Pressures over 250 PSI require a case drain line be installed. Rated Speeds: Up to Note: Ratings based on using anti wear hydraulic fluid. Dimensions: page 590 Foot Brackets: page 84 CBN94 CKK3 CBN95 CEN35 CEN36 CJD Cross 40 Series Gear Motors Internal Check Valves for Bi-Rotational Capability Cross Model 40M05DACSC 40M05DAKSC 40M07DACSC 40M0DACSC 40M2DACSC Displacement PressureRating Max Speed 0.50 in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev 3000 Mtg Flange Shaft Ports Other Features SAE A SAE A SAE A SAE A SAE A SAE A 5/8 St. x.25 Long 3/4 St. X 2.3 Long 5/8 St. x.25 Long 5/8 St. x.25 Long 5/8 St. x.25 Long 5/8 St. x.25 Long SAE-2 Side Ports Bi-Rotational 3.08 SAE-2 Side Port Bi-Rotational 6.75 SAE-2 Side Ports Bi-Rotational 6.85 SAE-2 Side Ports Bi-Rotational 6.00 SAE-2 Side Ports Bi-Rotational 8.00 SAE-2 Side Ports Bi-Rotational 8.36 Parts For Cross 40 Series Motors Part Number Description CBW20 5A008 Shaft Seal, igh Pressure (250 PSI) 0.04 CZ92 4P Shaft only (no gear),, for.00 in³/rev model 0.72 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 99

118 ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Gear Motors ydreco 500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the output shaft. Bi-Rotational models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: : (Varies with displacement. See table below). : Pressures over 50 psi require a case drain line be installed (Bi-Directional applications require a motor with Bi-Rotational feature, and a case drain line be installed). Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 59 Foot Brackets: page 84 CAK92 ydreco 500K Series Gear Motors Internal Check Valves for Bi-Rotational Capability ydreco Model 55KC3AAB Displacement PressureRating Max Speed.77 in³/rev 3600 Note: Minimum speed under load is 600. Mtg Flange Shaft Ports Other Features SAE A 5/8 St. x 2.25 Long 3/4 NPT Side & Rear (Side Ports Plugged) Bi-Rotational, Shielded Outboard Bearing 8.65 Indexes & Technical Information 200

119 ydraulic Motors & Accessories Gear Motors ydreco 500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability Features: eavy duty iron castings for higher working pressures. 4-bolt design places all four assembly bolts within the area of greatest internal pressure, which maintains perfect alignment and thus eliminates any decrease in efficiency at high pressures. This greatly reduces internal distortion and the resulting wear of internal parts. Deflecting pressure-balanced wear plates maintain high volumetric efficiencies and minimize mechanical losses. Pressure-lubricated roller bearing design makes these units relatively insensitive to contamination and also makes the units fully repairable. Application: Outboard bearing in some models (see tables) allows limited side loading of the input shaft. All models have mechanical face seal which allows for high back pressures with no case drain. Pressure Limits:. Rated Speeds: Varies with displacement (See table below). Maximum System Temperature: 80 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 0 Micron Absolute for maximum motor life. Dimensions & Technical Information: page 593 Foot Brackets: page 84 CAK78 CAK83 CAK88 CAK89 ydreco 500M Series Gear Motors Mechanical Face Seal for Bi-Rotational Capability ydreco Model 506MC3EBB 50MC3EBB 52MC3EBB 52MC3GBB Displacement PressureRating Max Speed in³/rev in³/rev in³/rev in³/rev 3600 Note: Minimum speed under load is 600. Mtg Flange Shaft Ports Other Features SAE A SAE A SAE A 4-Bolt Foot Mount 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 5/8 St. x 2.00 Long 3/4 NPT Rear Ports 3/4 NPT Rear Ports 3/4 NPT Rear Ports 3/4 NPT Rear Ports Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Bi-Rotational, Shielded Outboard Bearing Parts for ydreco 500M Series Motors Part Number Description CDK90 SKO362 Seal Kit for 500M Series Motors ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 20

120 ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Gear Motors Permco Box Motors Internal Check Valves for Bi-Rotational Capability Features: Motors are stocked with Permco's "Continental Shaft" (Shaft can be changed without motor disassembly by removing shaft retaining snap ring and pulling shaft and bearing out). This allows for an easy shaft change to satisfy various applications. Special iron alloy used for shaft covers, gear housings, bearing carriers and port end cover castings. Gears are cut to extremely close tolerances, and are shaped (rather than hobbing and shaving) for maximum volumetric efficiency. Application: All motors have both side and rear ports (The 2 unused ports need to be plugged). All motors are bi-rotational and may be used as bi-rotational pumps. All models have internal check valves that drain case pressure back to the low pressure side. Pressure Limits: :. : Pressures over 50 PSI require a case drain line be installed. Rated Speeds: Maximum System Temperature: Under normal conditions of continuous operation, not to exceed 50 F. Never to exceed 85 F. Note: Ratings based on using anti wear hydraulic fluid. For information on use with other fluids, contact us for assistance. Recommended Filtration: 25 micron return filter with B0 rating of at least 2.2. Dimensions & Technical Information: page 596 Foot Brackets: page 84 CDG94 CDG95 CDG96 Permco Model PEK0C PEK5C PEK20C CDG97 PEL7C CDG98 PEL20C CDG99 PEL22C CD PEL25C Permco Box Motors Internal Check Valves for Bi-Rotational Capability Displacement PressureRating Max Speed 2.00 in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev in³/rev 2000 Mtg Flange Shaft Ports Other Features 2/4 Bolt SAE B 2/4 Bolt SAE B 2/4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 4 Bolt SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B 3 Tooth SAE B NPT Side and Rear NPT Side and Rear -/4 NPT Side, NPT Rear -/4 NPT Side and Rear -/4 NPT Side and Rear -/4 NPT Side and Rear -/2 NPT Side, -/4 NPT Rear Bi-Rotational, Case Drain Bi-Rotational, Case Drain Bi-Rotational, Case Drain Bi-Rotational, Case Drain Bi-Rotational, Case Drain Bi-Rotational, Case Drain Bi-Rotational, Case Drain

121 ydraulic Motors & Accessories Gear Motors Miscellaneous Gear Motors CDD58 Mfg. M3000C783LDZA05- (M3000C783LDZA05-24) Contact us for more information. Miscellaneous Gear Motors Mfg Name Displ (in³/rev) Mount Shaft Ports Rot. Permco.00 SAE A 3/4 Straight 3/4 NPT Rear Other Features Bi-Rot ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 203

122 ydraulic Motors & Accessories Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Vickers 35M Series Vane Motors Up to 2875 lb-in Intermittent Torque Up to 4000 Intermittent Vickers 35M Series Vane Motors Unless noted otherwise, all motors have: SAE C Mounting Flange. -/2" SAE 4-Bolt Flange Ports. 3/8 NPT Drain Port (in rear cover). Application Information: page 597 Specifications: page 598 Model Codes: page 599 Dimensions: page 60 Replacement Parts: page 204 Port Flange Kits: Flanges page 227 Foot Brackets: page 84 Maximum Continuous Speed & Pressure: 500 PSI, 2250 PSI. Maximum Intermittent Speed & Pressure: 500 PSI, Intermittent Ratings: (0% of total operating time; each application of pressure and/or speed not to exceed 6 seconds). Motors are stocked as shown in table. ANY cover position is available for same-day shipment. See Model Codes page to select a different model code. Vickers See Note Above Vickers Model See Note Above Vickers 35M Series Vane Motors Shaft Displ Cu.Inch Per Rev Ring Size CBL M5A-C20 -/4 Straight CBL M5A-C20 4 Tooth SAE C Vickers Part No. Vickers Model M5A-C M5A-C Torque Per 00 PSI (lb-in) Cover Position Port Connections In-line (C) Port Connections In-line (C) Ring Size Cartridge Kit Shaft Shaft Key Shaft Seal Seal Kit /4"-Straight Tooth-SAE-C Vickers 35M Vane Motors Replacement Parts List Part Number Description CCC Cartridge Kit, Ring Size CCC Seal Kit, Buna-N 0.0 CBL # Shaft, -/4" Straight 2.04 CBC Shaft Key, 5/6 x -/ CBN Shaft Seal, Buna-N

123 ydraulic Motors & Accessories Eaton Piston Motors Eaton Medium Duty Piston Motors Features: Compact Lightweight Durable ousing Numerous Shaft Options SAE Mounting Flanges SAE O-Ring Porting Dual Rotation Various Porting Options Fixed Displacements Pressure Limits: Main Ports: Varies with displacement, see table below. Case: 25 PSI limit for 0.60 thru 2.48 cu.in./rev models, 00 PSI limit for 5.04 cu.in./rev model. Rated Speed: Varies with displacement, see table below. Temperature: 225 F maximum continuous. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the piston motor. Install piston motors in such a position that the case drain assures an oil level at or above unit center line. Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. The case of the motor must remain full at all times. The case drain line must be connected directly to the reservoir and terminate below the oil level. Oil level must be at or above the unit center line before starting the piston motor. Provide a case drain line of adequate size to limit the case pressure to specified maximum. Fluid Recommendations: ISO 4406 Cleanliness Level 8/3 or cleaner. Recommended Filtration: SSU Optimum, 60 SSU Minimum, 2000 SSU Maximum (cold start). Dimensions: page 595 CE22 CKD79 CKD8 CE23 Eaton Model 7435-DCU 7435-DA 7438-DBD 7438-DFW Displacement Max Speed rpm rpm rpm rpm Eaton Medium Duty Piston Motors Pressure Ratings Mounting Flange Shaft Ports Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent Continuous 5000 PSI Max Rated 5400 PSI Max Intermittent SAE B SAE B SAE B SAE B 3T SAE B 3T SAE B 5T SAE BB 3T SAE B Side Ports: SAE-6 Work, SAE-8 Case Drain Side Main Ports: SAE-2 Case Drains: SAE-8 Bottom, SAE-6 Upper Rear Same Side Main Ports: SAE-6 Top Case Drain: SAE-8 Side Ports: SAE-6 Work, SAE-8 Case Drain Other Features Plugged Speed Sensor Port, Polyacrylate Shaft Seal Shuttle Valve with 235 PSI LP Relief, M2x.5 Diagnostic Ports Parts for Eaton Medium Duty Piston Motors Part Number Description CKD Rotating Kit Assembly, Model CKD Rotating Kit Assembly, 2.77 in³, Model CKD Seal Kit, Model ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 205

124 ydraulic Motors & Accessories Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Overhung Load Adaptors ZERO-MAX / ELLAND Overhung Load Adaptors Features: Available in SAE flange sizes A, B, C, CC, D and sizes for Charynn & S Series motors with 4-bolt flange. ousings drilled & tapped for convenient foot mounting. A wide variety of custom input and output shafts are available on special order. Application: Used to protect motors, pumps and brakes from axial and radial stresses created by side loads. Also protects their shaft seals from invasive contaminants (a leading cause of motor failure). Materials: Bodies are made of 25,000 tensile strength cast iron. Shafts are made of 30,000 PSI stress proof steel. Bearing types vary by series. Mounting: orizontal mounting is standard. (Vertical mounting requires special attention to upper bearing lubrication. Contact us for application assistance). Lubrication: * ALL MODELS ARE SIPPED WITOUT LUBRICATION *. Product tables show the amount of lubricant needed for the recommended 2/3 cavity fill. Type of lubrication depends on. 800 and under: Bearing grease (high quality NLGI No. or No. 2), oil or force feed systems. 800 to 2500 : Low viscosity oil lubrication or force feed systems. Over 2500 : Force feed oil systems. Contact us for application assistance with oil or force feed systems. Calculating Overhung Load: Overhung Load (in pounds) = (63000 x P x F) / ( x RADIUS). P = orsepower. F =.00 for single chain drives,.0 for timing belt drives,.25 for double chain drives,.50 for v-belt drives, 2.50 for flat belt drives. RADIUS = Radius of sprocket or pulley in inches. Note: Doubling the Load reduces life to about one-tenth. Doubling the Speed reduces life by one-half. 4-Bolt for Charynn & S Series Motors Input Shafts: inch diameter or smaller. Output Shafts: inch male or female, -/2 inch male. Bearings: Deep-grooved ball bearings. Working Life Calculation: Estimated ours Working Life = 500 x [Cn / (2.378 x Overhung Load)]³ See table for model's Cn number, which varies with. Overhung load is in pounds. Calculation based on overhung load applied at -3/8 inches out from housing (see side view). Bearing life will increase significantly if load is positioned closer to unit. Indexes & Technical Information CBN99 40-OLA elland Model Input Output in. Straight with /4 x /8 Key 4-Bolt for Charynn & S Series Motors in. Straight with /4 x /8 Key Lube Qty. (oz) 50 Cn 00 Cn 200 Cn 500 Cn 000 Cn 800 Cn

125 ydrostatic Transmissions Eaton Light Duty ydrostatic Transmissions Models 6 & 7 Eaton Light Duty ydrostatic Transmissions Models 6 & 7 The Eaton Light Duty ydrostatic Transmission consists of a variable displacement radial ball piston hydraulic pump, a fixed displacement radial ball piston hydraulic motor and a system of valves, all contained in one housing. It can be used in many different types of applications where variable output speed is a requirement. Features: Self contained with no external high pressure lines or components. Simplified operation. Fast response with smooth, stepless output power. Positive braking action. Note: Model 7 units include some product refinements, and feature a reduction in noise levels when compared with Model 6 units. Operation: A single lever connected to the pump section controls both speed and direction of the transmission output shaft. Infinite speed control is achieved by varying the displacement ratios between the pump and motor. Displacements: in³/rev Variable Pump, in³/rev Fixed Motor. Maximum Speeds: 3600 Input, 250 Output. Input orsepower: (Maximum). A belt drive is preferred, with the sheave diameter 4 inches or less. Locate the belt drive over the input shaft bearing to minimize side loading. Output Torque: 20 lb.in. Continuous, 80 lb.in. Intermittent, 240 lb.in. Peak. Operating Temperature: 80 F (Maximum Continuous). A cooling fan is recommended. Recommended Fluid Viscosity: SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). Eaton Light Duty ydrostatic Transmissions Models 6 & 7 Eaton Input Rotation Reservoir Freewheel Valve Output Rotation Other Features CZY Yes Yes Motor rotated Output Rotation: When control shaft is rotated ClockWise. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 207

126 Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control ydrostatic Transmissions Eaton Medium Duty ydrostatic Transmission Pumps Displacements From.24 to 3.00 in³/rev Eaton Medium Duty ydrostatic Transmissions Introduction: Variable displacement piston pumps are used in closed loop systems either as a single or tandem pump. Oil is circulated by the pump to the motor and then returned directly back to the pump. A charge supply is used to supplement the closed loop system with oil. The charge supply may be supplied by an internal charge pump (standard) or an external source. Current Models: Manual Controlled: 7060 (.24in³/rev &.44in³/rev), (2.48in³/rev & 3.00in³/rev). Servo Controlled: (2.48in³/rev & 3.00in³/rev). Pressure Ratings: pressure ratings vary, see table below. All models have a 25 PSI maximum allowable case pressure. Max Charge Vacuum: 6 in. g. Max Case Drain Temperature: 225 F maximum continuous. yd Fluid Viscosity: SSU Optimum, 45 SSU Minimum, 0000 SSU Maximum (cold start). Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. Case Drain: CAUTION - Failure to meet these requirements may result in damage to the pump & motor The mounting orientation of pumps and motors is unrestricted provided the case drain of the pump and motor remain full Position the case drain such that it assures an oil level at or above unit center line at start-up The case drain line that carries the flow leaving the pump or motor should be connected to the highest drain port on each of the units. This assures that the pump and motor cases remain full Fill the case before starting Oil level must be at or above the unit center line before starting the piston motor Provide a case drain line of adequate size to limit the case pressure to specified maximum. Dimensions: page 605 Eaton CJA RZX-04 (ACGRALJ240 C2NNAMC000 00AAF0D) Displ (in³/rev) & Speed Rating & Pressure Ratings rpm 3000psi continuous 5000psi intermittent Eaton Medium Duty ydrostatic Transmissions Mtg Flange Shaft Rot Ports Control SAE BB 5T SAE BB SAE-6 ChPmp Manual, Control SAE-6 Servo, Main, Wide SAE-2 Deadband CaseDr Chg Pump Displ (in³/rev) Chg Press Relief (psi) Other Features SAE B 3T SAE B Auxiliary Pad, SAE-6 Chg Port C3, SAE-0 Chg Press Port C4, 4000 PSI Main Port Reliefs, Crossoop Bypass Valve Tandem Pumps, Parts for Eaton Medium Duty ydrostatic Transmissions Part Number Description CKD Rotating Kit Assembly, 2.48 in³, Model CKD Seal Repair Kit, Model CKD Seal Repair Kit, Single Pump, Model CKD Valve Plate, Rotation, 2.48 in³, Model

127 Eaton eavy Duty ydrostatic Transmission Pumps Series Models Series 2 Models Eaton eavy Duty ydrostatic Pumps Series & Series 2 ydrostatic Transmissions Series Features: 6000 PSI Pressure Rating. 0,000 our B0 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. ydraulic Servo Control provides low effort operation with low control pressure. igh strength swashplates resist deflection under high load. igh strength cast iron housings provide greater noise damping and wall strength. Cast iron body geroter charge pumps. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Series 2 Features: 6250 PSI Pressure Rating. Speeds to 450. Electronic Controls. The Series 2 Pump s single piece pump housing provides exceptional strength and soundproofing. The high-strength, one-piece swashplate has the swashlever and servo-pin integrated into the swashplate, delivering increased reliability without adding extra weight. A large diameter single servo piston permits pump operation at lower charge pressures, minimizing parasitic charge pump losses for increased overall pump efficiency. A large centering spring, housed within the servo piston, returns the pump to neutral in the event of control pressure loss. The new integral gerotor type charge pump combines excellent suction/speed capabilities in a compact design. The pump mounted electronics and sensors have been specially designed to meet the rigors of the mobile - off road enviroment, including resistance to electromagnetic interference or emissions. The serviceable bi-metal bearing plate has steel for high pressure capability and a bronze bearing face for high speed capabilities. SAE auxiliary mounts: A, B, B-B and C are available with and without charge pump. Excellent torque capability allows high horsepower to work circuits without multiple pump drives. The main system ports SAE code 6 and code 62 are available with SAE or Metric threads. side and same side configurations are now available to accommodate a wide range of installations. Peak Pressure: Series : 6000 PSI. Series 2: 6250 PSI. (Peak Pressure should not exceed % of operating time). Maximum Shaft Speed: See table below. Main Pump and Charge Pump have different maximum speed ratings. Use the lower rating for the combination. Recommended Fluid Viscosity: SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). System Temperature: 80 F Normal Continuous Limit, 220 F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the pump is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The pump and motor cases must remain full at all times. Dimensions: page 609 Eaton eavy Duty Motors: page 2 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 209

128 ydrostatic Transmissions Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Eaton eavy Duty ydrostatic Transmission Pumps Series Models Series 2 Models Eaton Part No. CJD (Series 2) CJD CJE CJE CJM (Series 2) Displ (in³/rev) & Speed Rating rpm rpm rpm rpm rpm Eaton eavy Duty ydrostatic Pumps Series & Series 2 Mtg Flange Shaft Rot Ports Control SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt SAE C 4-Bolt 4T SAE C 4T SAE C 4T SAE C 4T SAE C 3T SAE D C Inch Code 6 with Gauge Ports Inch Code 6 with Gauge Ports Inch Code 6 Inch Code 6 Inch Code 62 with Gauge Ports Manual Manual Manual Manual Manual with Neutral Lockout Switch Chg Pump Displ (in³/rev) & Speed Rating rpm rpm rpm rpm rpm 305 Chg Press Relief (psi) Other Features 5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, Control Orifices, SAE-A Auxiliary Mounting Pad with 9T SAE-A Spline and no shaft seal 5500 PSI Reliefs, 5000 PSI Pressure Overrides, Externally Adjustable Servo Piston Stops, Control Orifices, 4-Bolt SAE-C Auxiliary Mounting Pad with 4T SAE-C Spline and no shaft seal SAE B 3T SAE B Auxiliary Pad with Shaft Seal (Dry), Control Orifice, Charge Pump with Remote Pressure Filter Ports SAE B 3T SAE B Auxiliary Pad with Shaft Seal (Dry), Control Orifice, Charge Pump with Remote Pressure Filter Ports Propel Valve Plate, 4500 PSI Reliefs, 4000 PSI Pressure Overrides, Control Orifices, 4-Bolt SAE C Auxilliary Mounting Pad with 4T SAE-C Spline and no shaft seal Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received) Parts for Eaton eavy Duty ydrostatic Pumps Part Number Description CJS Gasket, Mounting Flange, Series Models Indexes & Technical Information 20

129 ydrostatic Transmissions Eaton eavy Duty ydrostatic Transmission Motors Displacements From 3.32 to 7.62 in³/rev Eaton eavy Duty ydrostatic Motors Models 33 through 76 Features: 6000 PSI Pressure Rating. 0,000 our B0 Bearing Design Life. Advanced cylinder barrel design permits high speed and pressure. Pistons have long engagement with cylinder bore resulting in low leakage. igh strength cast iron housings provide greater noise damping and wall strength. Bi-metal bearing plate has steel for high speed and pressure and bronze for greater bearing properties. A wide variety of configurations and options are available (Contact us for additional information). Peak Pressure: 6000 PSI (Peak Pressure should not exceed % of operating time). Maximum Shaft Speed: See table below. Recommended Fluid Viscosity: SSU is optimum. 60 SSU is low intermittent limit. 0,000 SSU is high intermittent limit (cold start-up). System Temperature: 80 F Normal Continuous Limit, 220 F Maximum Intermittent Limit. Recommended Filtration: ISO 4406 Cleanliness Level 8/3 or cleaner. CAUTION: Before the motor is started, fill the case through the uppermost drain port with hydraulic fluid of the type to be used. (The typical installation has the excess charge pump flow from the motor's charge pressure relief valve flushing the case on the pump. The motor's upper case drain line connects to the lower case port on the pump. The upper case port on the pump returns back to tank, often through a heat exchanger). The case of the pump and motor must remain full at all times. Dimensions: page 609 Eaton eavy Duty Pumps: page 209 Eaton CJM CW CEL CJ CJM CJM CJE Eaton eavy Duty ydrostatic Motors Models 33 through 76 Displ (in³/rev) & Speed Rating rpm rpm Mtg Flange Shaft Ports SAE C 4-Bolt SAE C 4-Bolt SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C SAE 4-Bolt C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C 4T SAE C Inch Code 62 Inch Code 6 Inch Code 6 Inch Code 62 Inch Code 6 Inch Code 62 Inch Code 62 igh Pressure Reliefs (psi) Charge Pressure Relief (psi) Other Features None None None None Remanufactured Units: Remanufactured Units are genuine Eaton Factory Remanufactured Units that carry the same warranty as new units, and require a trade-in of your old unit. (A Core Charge is added to your invoice, and is credited when your trade-in is received). ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 2

130 ydraulic Cylinders Tie Rod -/2" Bore Midway DA Series Features: Ductile iron rod clevis, base clevis and cylinder head. Aluminum alloy piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. Ground & polished chrome plated rod. Precision honed cylinder tube. igh tensile steel tie rods. Zinc plated clevis pins and clips. Maximum Operating Pressure:. Dimensions: page 62 -/2" Bore Midway DA Series Midway Model Bore (in) Stroke (in) Rod Dia (in) Ports Pin to Pin Retracted (in) Pin to Pin Extended (in) Pin Dia (in) CEG69 504TR /4 NPT CAK80 506TR /4 NPT CAK8 508TR /4 NPT CAK90 52TR /4 NPT " to 5" Bore Monarch TL & TX Series TL Series Features: Ductile iron rod clevis, base clevis and cylinder head. Ductile iron piston with o-ring seal and backup rings. Self locking piston nut. Metal clad rod wiper. ard chrome plated shaft. Precision finished skive & burnished heavy steel wall tube. igh tensile steel tie rods. Zinc plated high tensile steel pins & retainers. Double ported. TX Series Features: Lighter weight / Lesser cost Ductile iron castings Double ported base caps working pressure, 5000 PSI proof pressure Offered in red & black (standard stock models are red) Offered in inline and 90 to pin port orientations (standard stock models are ports inline with pins). Maximum Operating Pressure:. Note: ASAE cylinders (2 to 4 bore) have threaded shaft to accept optional mechanical stroke control. Note: TL Series cylinders are double ported both ends, and are assembled with ports inline with pins. TX Series cylinders rod end port (just one port) is inline with pin unless noted otherwise, blind end is double ported and is assembled inline with pin (unless noted otherwise). Application Considerations: Long stroke cylinders have lower full extension ratings to prevent excessive column loading (buckling of shaft). See tables. Dimensions: page 62 2" to 5" Bore Monarch TL & TX Series Rod Dia (in) Pin to Pin Retracted (in) Pin to Pin Extended (in) Monarch Model Bore (in) Stroke (in) Ports CJX TX /8 NPT CKB TX /8 NPT CKA TX-ASAE /8 NPT CKJ47 200TX /8 NPT CJX55 202TX /8 NPT CKA45 204TX /8 NPT CJX56 206TX /8 NPT Pin Dia (in) Full Extension Rated Pressure (psi) Full Extension Rated Load (lbs) ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 22

131 ydraulic Cylinders Indexes & Technical Information Miscellaneous Products Fluid Conveying Pneumatic Power & Control ydraulic Power & Control Tie Rod Monarch Model Bore (in) Stroke (in) 2" to 5" Bore Monarch TL & TX Series Rod Dia (in) Ports Pin to Pin Retracted (in) Pin to Pin Extended (in) CKJ49 208TX /8 NPT CKJ TX /8 NPT CKJ TX /8 NPT CKF TX /8 NPT CJR TX-ASAE /8 NPT CJX94 250TX /8 NPT CJR57 252TX /8 NPT CJR58 254TX /8 NPT CJR59 256TX /8 NPT CKJ63 258TX /8 NPT CKJ TX /8 NPT CJY TX /2 NPT CKG2 3008TX /2 NPT CJY TX-ASAE /2 NPT CKJ85 300TX /2 NPT CKJ86 302TX /2 NPT CJY66 304TX /2 NPT CJY67 306TX /2 NPT CKJ87 308TX /2 NPT CKJ TX /2 NPT CKJ9 3024TX /2 NPT CKJ TX-ASAE /2 NPT CKJ TX /2 NPT CKK 350TX /2 NPT CKK2 354TX /2 NPT CKK3 356TX /2 NPT CKK4 358TX /2 NPT CKK2 4008TX /2 NPT CKK22 400TX /2 NPT CKK23 402TX /2 NPT CKK24 408TX /2 NPT CKK TX /2 NPT Monarch TL & TX Series Cylinders Replacement Parts Part Number Description CZX Clevis Clips ( Bag of 2 clips) 0.4 CBX MONARC Clevis Pin & Clip Kit, contains (2) Clevis Pins and (4) Clips.00 CFN Rod Clevis for 2 & 2-/2 Inch Bore TL Series Cylinders, Inch Pin Size.84 CG Rod Clevis for 3, 3-/2 & 4 Inch Bore TL Series Cylinders, Inch Pin Size 2.9 CDK2 RK20L-2 TL Series Seal Kit, 2 Inch Bore, -/8 Inch Rod 0.06 CDK3 RK25L-2 TL Series Seal Kit, 2-/2 Inch Bore, -/8 Inch Rod 0.08 CDK4 RK25L-25 TL Series Seal Kit, 2-/2 Inch Bore, -/4 Inch Rod 0.20 CDK5 RK30L-25 TL Series Seal Kit, 3 Inch Bore, -/4 Inch Rod 0.09 CDK6 RK30L-50 TL Series Seal Kit, 3 Inch Bore, -/2 Inch Rod 0.08 CDK7 RK35L-25 TL Series Seal Kit, 3-/2 Inch Bore, -/4 Inch Rod 0.09 Pin Dia (in) Full Extension Rated Pressure (psi) Full Extension Rated Load (lbs) 23

132 ydraulic Cylinders Tie Rod Monarch TL & TX Series Cylinders Replacement Parts Part Number Description CDK8 RK35L-50 TL Series Seal Kit, 3-/2 Inch Bore, -/2 Inch Rod 0.09 CDK9 RK40L-25 TL Series Seal Kit, 4 Inch Bore, -/4 Inch Rod 0.0 CDK20 RK40L-50 TL Series Seal Kit, 4 Inch Bore, -/2 Inch Rod 0.0 CDK69 SB25-00 Steel Stop Bushing, 2-/4" OD, " wide, for -/4 Rod 0.76 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 24

133 ydraulic Power & Control ydraulic Cylinders Custom Georgia ydraulic Cylinders Georgia ydraulic Cylinders has a reputation for building quality cylinders, quickly, at a reasonable cost. New applications, as well as replacing existing industrial or mobile cylinders, are welcome. Please contact us for application assistance. Pneumatic Power & Control 2500 Series Welded - Medium Duty: Suitable for medium pressure hydraulic service Cast iron head and piston are made from fine grained centrifugally cast bar Piston rod is ground, polished and plated medium carbon steel Teflon piston seals are available O-ring boss ports are available Optional high temperature seals. Dimensions: page 63 Fluid Conveying Miscellaneous Products Indexes & Technical Information 3000 Series Welded - eavy Duty: Suitable for high pressure applications Cast iron piston rings or Teflon piston rings are available Internal cushioning is available O-ring boss ports are available Optional high temperature seals. Dimensions: page 64 LA- Series - Tie Rod: LA Series (Air) L Series (Low Pressure ydraulic) Series (igh Pressure ydraulic) Custom Cylinders: Manufactured to your specifications Bore sizes to 20 inches Lengths to 20 feet. 25

134 Custom DM ydraulics, LLC Cylinders ydraulic Cylinders DM ydraulics, LLC designs and manufactures single acting, double acting, and telescopic hydraulic cylinders for mobile equipment applications. Please contact us for application assistance. Ram: DM manufactures " to 3" solid rod rams and 3" to 5" hollow rod ram cylinders. DM has various ram designs including an adjustable v-packing design, a polypak rod seal design and a heavy duty design to accommodate sideloading. Double Acting: DM custom designs and manufactures " to 6" bore double acting cylinders to meet the application's requirements. Standard double acting cylinders accommodate operating pressures up to 3,000 PSI. Telescopic: DM is considered the industry leader in small bore, single acting and double acting telescopic cylinders. They custom design their telescopic cylinders to meet the application's requirements. Piggyback: DM's piggyback cylinders are designed to accommodate applications that require additional stroke and require consistent extension and retraction speed. Rephase: DM's rephase cylinders are designed to synchronize the extension and retraction of two or more cylinders. These cylinders are custom designed to meet the specific requirements of the application. Aluminum: DM is the leading global manufacturer of aluminum hydraulic cylinders. These cylinders are very durable, lightweight and used in highly corrosive environments. The aluminum cylinders are rated to accommodate operating pressures up to 3,000 PSI. Double Rod End: DM manufactures double rod end cylinders for a variety of applications that require push and/or pull force from both ends of the cylinder. Integrated Valving: Many of DM's cylinder designs have integrated valving including counterbalance valves, pilot-operated check valves, sequencing valves and thermal relief valves as required to meet the performance requirements of the application. Linear Feedback: Linear feedback devices can be internally or externally mounted to provide precise cylinder position. These cylinders are used for accurate positioning and velocity control. eavy Duty: DM's heavy duty cylinders are designed to meet the requirements of rugged applications including sideloading, operating pressures up to 5,000 PSI, pressure spikes up to 0,000 PSI, and high shock and vibration levels. Locking: DM designs and manufactures locking cylinders for applications that require a mechanical locking system. Their mechanical locking features are integrated into the design of the cylinder. Screw Actuator: DM also manufactures hydraulically driven screw actuators that are custom designed for applications required to move up to 0,000 lbs. or more at speeds of 00 in./min. The acme screw has mechanical self locking capability in any position. ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 26

135 Steering Units & Accessories Charynn Power Steering Charynn Series Steering Control Units Open Center, Nonoad Reaction Traditional power steering units for applications that don't require integral valve capabilities. Max. System Pressure:. Max. Back Pressure: 300 PSI. Operating Temperatures: Maximum System Operating Temperature is 200 F. Maximum differential between steering unit and system temperature is 50 F. Input Torque: PSI back pressure for powered applications. 00 lb-ft maximum for non-powered applications. Fluids: Most petroleum based fluids and ATF Type A. Recommended Filtration: ISO 8/3 Cleanliness Level. Dimensions: page 65 Charynn Series Steering Control Units Open Center, Nonoad Reaction Charynn Model Displacement (cu.in./rev) Rated () Ports Special Features CBC /6-8 St.Thd O-Ring.68 CBC /4-6 St.Thd O-Ring.0 CBC /4-6 St.Thd O-Ring.3 CJX /6-8 St.Thd O-Ring.48 CBC /4-6 St.Thd O-Ring.44 CBC /4-6 St.Thd O-Ring 2.00 CBC /4-6 St.Thd O-Ring 2.7 CBC /4-6 St.Thd O-Ring 2.55 CBC /4-6 St.Thd O-Ring 3.33 CBC /4-6 St.Thd O-Ring 4.50 CBC /4-6 St.Thd O-Ring 5.05 CBC /4-6 St.Thd O-Ring 6.33 CKJ /4-6 St.Thd O-Ring 8.30 Parts For Charynn Series Steering Control Units Part Number Description CAB Seal Kit, Buna-N, -00 Series. Quad Ring Shaft Seal CAB Seal Kit, Buna-N, Series CAB Seal Kit, Buna-N, with Low Input Torque Seal (replaces Quad-Ring), Series 0.03 ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 27

136 Steering Units & Accessories ydraulic Power & Control Charynn Power Steering Steering Columns for Charynn Series Features: Column & mounting flange is a sturdy single weldment. The method of retaining bearing & shaft provides high thrust load and side load capacity. Dust seal protects against dirt and moisture. Available with serrated or keyed shaft. One or two horn wires are available with the serrated shaft. Dimensions: page 65 Pneumatic Power & Control Fluid Conveying Steering Columns for Charynn Series Charynn Model Length (in) Shaft Type orn Wire CAY No.72 CAY Serrated No.86 CAY Serrated No 2.20 CJF Serrated No 2.40 CAY Serrated No 5.7 C Serrated Wire 5.7 Note: As of February 28, 2008, mounting bolts are being be furnished with the columns (4ea 3/8-6 x 3/4 2-point cap screws). Accessories For Charynn Steering Columns Part Number Description CGM Bolt Kit containing (4) 3/8-6 x 3/4 2-point cap screws (to bolt the column to the steering unit) 0.4 Indexes & Technical Information Miscellaneous Products 28

137 Steering Units & Accessories Charynn Power Steering Steering Wheels & Accessories for Charynn Series Steering Wheels & Accessories for Charynn Series Charynn Model Description CBB Steering Wheel, Standard, 7 inch diameter, black. Fits 3/6-20 Serrated Columns CJD Steering Wheel, thin 3-spoke design, 5 inch diameter. Fits 3/6-20 Serrated Columns. 4.3 CAA ex Nut for attaching Steering Wheel to Serrated Column. 3/6-20 UNF CBB Steering Wheel Cap (For installations without horn) 0. CBA orn Button Kit 0.37 Other Charynn Steering Products Other Charynn Steering Products Charynn Model Description CGM Seal Kit for 27 Series (Gerotor) Torque Generator 0.03 CJX CJC QA CJC Series 0 Steering Control Unit, 2,, 28.2 in³/rev, Open Center, Nonoad Reaction, 45 PSI Max Back Pressure, Manual Steering Check, SAE-8 Ports, 2 x M2 Mounting Threads Port Face, 4 x M0 Mounting Threads Mounting Face, VLE Inine Priority Control, 40, Standard Metering, Dynamic Load Sense Pilot with Standard.23 Boost, 00 lbf/in² Control Spring, Relief, Ports CF (SAE-0) P & EF (SAE-2) LS & T (SAE-4) Series 20 Steering Control Unit, 7,, 45. in³/rev, Load-Sensing, Dynamic Signal, Nonoad Reaction, Anti-Cav Check, SAE-8 Main Ports, SAE-4 LS Port, Low Input Torque, Wide Angle Deflection ydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information 29