Automotech Ser vices Ltd

Transcription

1 Automotech Ser vices Ltd Specialists in vehicle lifts and garage equipment EST 1972 Issue Call now:

2 Specialists in vehicle lifts and garage equipment Two Post Lifts 3.5T Delivery from as little as 50 AS-235SB Twin Hydraulic Ram, 2 Post Lift This two post lift uses a twin hydraulic ram design for steady raising and lowering operation. This sturdy proven lift will give you trouble free service for many years. Lifting capacity 3.5T Lifting height 1900mm Minimum height 110mm Manual safety locks in each post Lift pad s optional Single or 3 phase option telescopic arms 800mm-1200mm 800mm-1200mm Automatic arm locks 999+ VAT Our lifts are fitted with a low voltage control system 210mm 110mm Automotech was established in 1972 Call now:

3 Call now: AS-6140A Twin Hydraulic Ram, 2 Post Lift Automatic arm locks 980mm mm 50mm low clearance base plate 740mm mm This lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation. Although 4T capacity you can still lift the smallest cars with this machine. Lifting capacity 4T Lifting height 1900mm Minimum height 98mm Manual safety locks in each post Lift pad s included (for vans / 4X4) Single or 3 phase option Now with 2 and 3 stage telescopic arms 1,199+ VAT 4T Lift pad s for vans / 4x4 included Extra lifting pad for long arms 150mm 75mm 50mm All our new equipment comes with 12 months warranty as standard

4 Specialists in vehicle lifts and garage equipment Two Post Lifts Delivery from as little as 50 AS-6240TA Twin Hydraulic Ram, Clear Floor, 2 Post Lift This lift is simple and robust. Uses a twin hydraulic ram design for steady raising and lowering operation. Although 4T capacity you can still lift the smallest cars with this machine. Lifting capacity 4T Lifting height 1900mm Minimum height 98mm Manual safety locks in each post Safety shut-off bar on the overhead bridge Lift pad s included (for vans / 4X4) Single or 3 phase option 1,299+ VAT 4T Lift pad s for vans / 4x4 included Extra lifting pad for long arms Our lifts are fitted with a low voltage control system 150mm 75mm 50mm Automotech was established in 1972 Call now:

5 Call now: Asymmetrical Symmetrical Can be installed in asymmetrical or symmetrical configuration 80mm lift pad s + holder included AS-6246/H1 Twin Hydraulic Ram Clear Floor 2 Post Lift This lift uses direct drive hydraulic rams and a single point safety lock release system. This means there are very few moving parts and components. The double S bent post structure increases the post strength making the lift very strong and stable. Although 4T capacity the smallest and lowest cars can still be lifted using this machine, with the lift pad lowest height at just 85mm. Lifting capacity 4T Lifting height 1800mm Minimum height 85mm Single point manual safety locks Double screw pad adapters Asymmetrical or Symmetrical configuration Safety shut off bar on the overhead bridge Lift pad s included (for vans / 4X4) Single phase or 3 phase option 1,950+ VAT 25mm Our lifts are fitted with a low voltage control system 100mm 170mm C.E. approved locks 4T V at the buttons Our automatic arm locks are fully approved, tested and safe. Automatically disengage when the lift is lowered for symmetrical configuration All our new equipment comes with 12 months warranty as standard

6 Specialists in vehicle lifts and garage equipment Two Post Lifts Installation service available Please contact us for information AS-6150A Twin Hydraulic Ram, 2 Post Lift This lift is ideal for lifting large vans and commercial vehicles, with its huge lifting capacity of 5000Kg. The design of the arms will also allow the machine to be used on cars. Lifting capacity 5T Lift height 1900mm Minimum height 120mm 3 stage lifting arms Safety locks in each post Lift pad s included 240v single phase or 415v 3 phase 5T Lift pad s included C.E. approved locks automatically disengage when lift is lowered 2,050 + VAT 180mm 80mm 50mm 860mm mm 860mm mm Automotech was established in 1972 Call now:

7 We offer innovative leasing options Four Post Lifts AS-6640P Hydraulic 4 Post Lift With a platform length of 4800mm and 2500kg jacking beam, this lift is a great value all-round machine. Lifting capacity 4T Lifting height 1850mm Platform length 4800mm Jacking beam included 3 phase or single phase 2,350 + VAT Includes 2.5T jacking beam 4T Jacking beam s included 180mm 80mm All our new equipment comes with 12 months warranty as standard

8 Specialists in vehicle lifts and garage equipment Four Post Lifts Installation service available Please contact us for information AS-6640 Hydraulic Wheel Alignment 4 Post Lift A platform length of 4800mm, 2500Kg jacking beam, rear side to side slip plates and front recessed adjustable turn plates. Makes a great valve full wheel alignment lift. Lifting capacity 4.0T Lifting height 1850mm Platform length 4800mm Jacking beam included Rear slip plates Adjustable front recesses for turn plates High quality turn plates included 2,650 + VAT Front turn plate recesses can be adjusted to suit different length vehicles. Rear side to side slip plates also fitted as standard. Includes 2.5T jacking beam Jacking beam s included 4T 180mm 80mm Automotech was established in 1972 Call now:

9 Call now: AS-4T36 Hydraulic 4 Post Lift The AS-4T36 is the ideal lift for vehicle storage when space is tight. The lift can be moved within minutes with the aid of the mobile wheel kit provided. The perfect lift for Classic car restoration enthusiasts. Lifting capacity 3.6T Lifting height 1900mm Platform length 4000mm Full Mobile Wheel Kit Included 3pcs Oil Drip Trays Included 1pcs Jack Tray Included 1,590 VAT Full mobile wheel kit included Dual safety locks at each post 3.6T Low voltage control system Removable ends stops Removable drive on ramps Optional 2.5T jacking beam All our new equipment comes with 12 months warranty as standard

10 Specialists in vehicle lifts and garage equipment Scissor Lifts AS-8240TX 4T Alignment Scissor Lift The perfect solution for wheel alignment and the servicing of vehicles. The machine is fitted with lockable rear slip plates and front turn plates as standard for wheel alignment operation. The front turn plate covers can be fitted when the turn plate operation is not required. Also fitted as standard is the 2500Kg rolling jacking beam with screw pad adapters to accommodate all vehicles. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles. Lifting capacity 4T Lifting height 2160mm Minimum height 290mm Can be surface mounted or flush mounted Front turn plates included Turn plate covers included Extra long rear slip plates Extra long drive up ramps Hydraulic failure safety devices Mechanical safety locks Low voltage control system (as required by regulations) 4,200+ VAT 80mm 180mm Jacking beam lift pad s included 2500kg jacking beam included 4T Optional flush mount drive on ramps, for infloor installation Turn plates included Our lifts are fitted with a low voltage control system Automotech was established in 1972 Call now:

11 Call now: Extra long drive up ramps ideal for low vehicles 4420mm 1308cm 290mm mm Extra long slip plates included 2345mm Removable turnplate covers Air operated Safety locks for on-ground installation All our new equipment comes with 12 months warranty as standard

12 Specialists in vehicle lifts and garage equipment Scissor Lifts Installation service available Please contact us for information AS-8250N 5T Alignment Scissor Lift The perfect solution for wheel alignment and the servicing of vehicles. The machine is fitted with lockable rear slip plates and front turn plates as standard for wheel alignment operation. The front turn plate covers can be fitted when the turn plate operation is not required. Also fitted as standard is the 2500Kg rolling jacking beam with screw pad adapters to accommodate all vehicles. When installed on the surface the extra-long drive up ramps will accommodate low riding vehicles. Lifting capacity 5T Lifting height 2160mm Minimum height 290mm Can be surface mounted or flush mounted Front turn plates included Turn plate covers included Extra long rear slip plates Extra long drive up ramps Hydraulic failure safety devices Mechanical safety locks Low voltage control system (as required by regulations) 80mm 180mm Jacking beam lift pad s included 2500kg jacking beam included Optional flush mount drive on ramps, for infloor installation Turn plates included 4,600+ VAT for on-ground installation 5T Our lifts are fitted with a low voltage control system Automotech was established in 1972 Call now:

13 Call now: Drive up ramps can be locked in the upright position to extend the platform length Quick release lock AS T Full Rise Scissor Lift This 3.5T capacity low profile scissor lift is surface mounted, there is no need for expensive ground works. An ideal machine when space is tight and full working height is required. Lifting capacity 3.5T Lifting height 1900mm Minimum height 115mm Extendable lift platforms Hydraulic failure safety devices Low voltage control system Rubber lift blocks included 2,250+ VAT X4 rubber sill mounting blocks included Twin hydraulically synchronised rams in each platform means a clear and safe working area between the lift 3.5T Our lifts are fitted with a low voltage control system All our new equipment comes with 12 months warranty as standard

14 Specialists in vehicle lifts and garage equipment Scissor Lifts Installation service available Please contact us for information AS-7230A Scissor Lift This low profile full rise scissor lift is surface mounted, there is no need for expensive ground works. An ideal unit when space is tight. Lifting capacity 3T Lifting height 1900mm Minimum height 112mm Rubber lift blocks included Single or 3 phase option 1,799+ VAT 3T X4 rubber sill mounting blocks included Machine bolts directly to the floor. No need for expensive ground works Drive up ramps can be locked in the upright position to extend the platform length Our lifts are fitted with a low voltage control system Automotech was established in 1972 Call now:

15 Call now: T Lift platforms can be extended for longer vehicles AS-7330 Three Tonne Scissor Lift In floor, full rise scissor lift gives a flush floor finish when lowered. This means that the minimum height is 0mm. The installed lift gives a very professional appearance to any workshop. Lift capacity 3T Lift height 1700mm Minimum height 0mm Rubber lift blocks included Pneumatic safety locks 240v single phase or 415v 3 phase 1,799+ VAT Full height with a clear working area between platforms X4 rubber sill mounting blocks included Drive on Our lifts are fitted with a low voltage control system All our new equipment comes with 12 months warranty as standard

16 Specialists in vehicle lifts and garage equipment Scissor Lifts Delivery from as little as 50 AS-7532B 3.2T Mid Rise Scissor Lift A surface mounted low profile mid-rise scissor lift with a minimum height of just 110mm. Its unique design gives a clear working area between platforms. An ideal lift for busy repair shops and tyre bays. Lifting capacity 3.2T Lifting height 1000mm Minimum height 110mm Extendable lift platforms Hydraulic failure safety devices Low voltage control system Rubber lift blocks included Drive up ramps can be locked in the upright position to extend the platform length Quick release lock Twin hydraulically synchronised rams in each platform means a clear and safe working area between the lift 1,599+ VAT X4 rubber sill mounting blocks included 3.2T 1460mm mm 860mm 110mm Our lifts are fitted with a low voltage control system 490mm Automotech was established in 1972 Call now:

17 Call now: AS-7530D Garage Scissor Lift This scissor lift is ideal for tyre shops / body shops, with the advantage of it being totally mobile. Drive up ramps can be locked in the upright position to extend the platform length Quick release lock Our lifts are fitted with a low voltage control system 1420mm mm Fully mobile Lifting capacity 3T Extendable platform Lifting height 1000mm Minimum height 110mm Pneumatic safety locks 240V single phase No installation required 1,299+ VAT 860mm Mobile Wheel Kit Every machine comes with a full mobile kit as standard 110mm 490mm 3T X4 rubber sill mounting blocks included All our new equipment comes with 12 months warranty as standard

18 Specialists in vehicle lifts and garage equipment Scissor Lifts Delivery from as little as 50 AS-7630 Mobile Scissor lift This compact mobile scissor lift is ideal for tyre and body shops. A great favorite with DIY and classic car enthusiasts. Lifting capacity 2.7T Lifting height 1300mm Minimum height 118mm 240v single phase No installation required No air supply required VAT Our lifts are fitted with a low voltage control system Fully adjustable arms Lift pad s as standard 2.7T Fully mobile Electro / mechanical safety lock 50mm 100mm 150mm 200mm Automotech was established in 1972 Call now:

19 We offer innovative leasing options Mobile Lift AS Tonne Scissor Lift The AS-5500 mobile lift has no electrical connection as it is operated with a powerful air / hydraulic pump. A great favorite with DIY and classic car enthusiasts. Lift capacity 2.5T Lift height 1025mm Minimum height 123mm Pneumatic safety locks Air operated (compressor required 6-7 bar) VAT 1025mm max Air operated! No electrical supply required 2.5T The lift is supplied with a mobile kit as standard 2554mm 1015mm 123mm min 293mm All our new equipment comes with 12 months warranty as standard

20 Specialists in vehicle lifts and garage equipment Mobile Lifts Space SAVing vehicle lifts AS-0901/1 Portable Tilting Lift This mobile lift is ideal for any workshop, mobile mechanic or DIY enthusiast. Lightweight and very portable, no need for any air or power supply. 1500Kg capacity Lightweight design 58Kg Vehicle can be tilted forwards or backwards Supplied with manual handle Supplied with bracket so that a drill can be used to raise and lower Lift can be locked at required angle Lifting height 585mm Min height 150mm VAT Automotech was established in 1972 Call now:

21 Call now: AS-7607 Motorcycle Scissor Lift This high quality motocycle lift is the ideal solution for motorcycle servicing and repairs. Its optional side platforms can be added to turn this versatile lift into a quad bike or mini tractor lift. Fitted with optional platform Air operated! No electrical supply required Optional 240v hydraulic version Retractable drive up ramp Removable rear platform section Front wheel clamp Tool tray Bike tie down brackets Air operated (compressor required 6-7 bar) Optional 240V hydraulic version VAT Slide away drive on ramp All our new equipment comes with 12 months warranty as standard

22 Specialists in vehicle lifts and garage equipment Tyre Machines AS-20SA Semi Automatic Tyre Changer This compact machine is simple to use, with a turntable that will clamp up to 20 rims. Swing arm / semi automatic style rim clamping Inflation gauge included Tyre lever included 240v single phase 490+VAT Delivery from as little as 35 AS-24SA Semi Automatic Tyre Changer This Semi automatic machine is compact, simple to use and will handle rims up to 24. A great value for money machine. Swing arm / Semi- Automatic style Rim clamping Inflation gauge included Tyre lever included Plastic jaw protectors included 240v Single phase Motorcycle adapters available Cost VAT Includes aluminium wheel protection kit / tyre lever and inflation gauge Automotech was established in 1972 Call now:

23 Call now: AS-24FA Fully-Automatic tyre changer This Automatic machine is a tilting back arm design, with a built in jaw bead blaster for seating tyre s quickly. Fully-Automatic style Rim clamping Built-in inflation gauge included Tyre lever included Plastic jaw protectors included 240v Single phase Motorcycle adapters available Cost 80 Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool 800 +VAT AS-24XFA Automatic - tyre changer with power assist arm The automatic machine is the same as the AS-24FA but with the addition of a powerful pneumatic assist arm. The air operated bead lifting and pressing device makes tyre mounting and demounting much easier, especially stiff beaded low profile tyres. Fully Automatic style Air operated assist arm Rim clamping Built-in inflation gauge included Built-in jaw bead blaster Plastic jaw protectors included 240v Single phase Motorcycle adapters available Cost 80 1,199 +VAT Includes aluminium wheel protection kit / Tyre lever / Tyre pressing tool All our new equipment comes with 12 months warranty as standard

24 Specialists in vehicle lifts and garage equipment Tyre Machines Installation service available Please contact us for information AS-24XSA Semi Automatic Tyre Changer With Twin Assist Arms This compact machine has the advantage of having the twin air operated bead lifting and pressing rams fitted from above. This makes tyre mounting and demounting much easier. Swing arm / semi automatic Twin assist arms rim clamping Inflation gauge included Plastic jaw protection covers included Tyre lever included 240v single phase 845+VAT AS-28XSA Semi Automatic Tyre Changer with Twin Assist Arms Capable of handling rims up to 28 the twin air operated bead lifting and pressing rams make tyre mounting and demounting much easier. Swing arm/semi automatic Style with twin assist arms Inflation gauge Plastic jaw protection covers Tyre lever Water/oil separators Single phase 240v supply Motor power Kw Max wheel diameter 1143mm/45 Inner clamping Outer clamping Bead break force 2500Kg Net weight 200Kg 12 month parts warranty 240v plug in Package size 1130 x 900 x 1030mm 895 +VAT Automotech was established in 1972 Call now:

25 We offer innovative leasing options Wheel Balancers AS-401 Motorised Wheel Balancer rim diameter rim width Auto spin once hood is lowered Auto stop / positioning Set of 4 cones included Alloy wheel programs Calipers, weight pliers included Counter balanced chassis 240v single phase This Italian designed balancer is extremely fast and accurate to use With added auto stop feature. (This stops the wheel where the weight is to be applied) 599 +VAT AS-B24 Motorised Wheel Balancer This balancer is very easy to use. Balances wheels in seconds rim diameter rim width Auto spin once hood is lowered Set of 4 cones included Alloy wheel programs Calipers, weight pliers included 240v single phase 545 +VAT AS-HB24 Hand Spin Wheel Balancer The ideal machine for the mobile tyre fitter rim diameter rim width Set of 4 cones included Alloy wheel programs Calipers, weight pliers included 240v single phase 499 +VAT All our new equipment comes with 12 months warranty as standard

26 Specialists in vehicle lifts and garage equipment Tyre Machine Accessories AS-401LC The large cone adapter enables the AS-401 balancer to handle wheels with a larger than 140mm centre hole VAT AS-401CLA The adapter enables centre less wheels (Wheels manufactured without a hole in the centre) to be mounted to the AS-401 Balancer VAT AS-401MCA The adapter enables the AS-401 Balancer to balance motorcycle wheels VAT AS-B24LC The large cone adapter enables the AS-B24 range of balancers to handle wheels with a larger than 140mm centre hole. 70 +VAT AS-B24CLA The adapter enables centre less wheels (Wheels manufactured without a hole in the centre) to be mounted to the AS-B24 range of balancers VAT AS-B24MCA The adapter enables the AS-B24 range of balancers to balance motorcycle wheels VAT AS-24MCJ The kit enables motorcycle wheels to be mounted on to all Automotech 24 and above tyre machines. 80 +VAT AS-18AB Bead Seater The ideal tool for fitting / seating tyres to rims VAT AS-18ABH Bead Seater The ideal tool for fitting / seating tyres to rims, with easy operation via the slide valve on the hose VAT Automotech was established in 1972 Call now:

27 We offer innovative leasing options Garage Equipment AS-LWA40 Wheel Alignment Gauge The AS-LWA40 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use. Precision laser to indicate toe-in / toe-out Tough 2.5mm steel construction Can be used on vehicle lifts Will work on vehicles with rim diameters 6-23 Battery powered by 2 x aa batteries (included) Measuring range +/- 3deg Laser class ii AS-LWA50 Wheel Alignment Gauge The AS-LWA50 wheel alignment gauge measures the angle between the vehicle wheels to give toe-in / toe-out readings. The unit is easily calibrated and very simple to use. Precision laser to indicate toe-in / toe-out Can be used on vehicle lifts Will work on vehicles with rim diameters 8-24 Battery powered by 2x AA batteries (included) Laser beam height 40mm from floor Measuring range +/-2deg Laser class II 180+VAT VAT AS-TU40 These fully ball-raced cast iron turn plates will not bend or buckle under load. Ideal for use with Wheel Alignment / Tracking Gauges or MOT 4 Post Lifts. Plates come as a pair Cast iron upper and lower components Ball bearings fitted for ease of use and precision Lock off feature (plates can be lock to stop rotation) Tough powder coat paint finnish 230+VAT All our new equipment comes with 12 months warranty as standard

28 Specialists in vehicle lifts and garage equipment Garage Equipment AS Engine / Gear Box Stand The ideal work station when rebuilding units. Capacity 350Kg Fully adjustable cradle to accept a wide varity of engines / gearboxes Head rotates 360 degrees Steel casters VAT AS Engine / Gear Box Stand The ideal work station when rebuilding units. Capacity 450Kg Fully adjustable cradle to accept a wide varity of engines / gearboxes Head rotates 360 degrees Steel casters 50+VAT AS-0301C 1.0 Tonne Spring Compressor Makes changing shock absorbers quick and easy. 1.0T capacity (1000Kg) For use on spring length 200mm - 570mm For use on spring diameter 100mm - 250mm Ram travel 330mm High speed foot pump 73+VAT AS Engine Support Beam The AS Engine support Beam is the essential tool when removing gear boxes / engine supports etc. Capacity 500Kg Fully adjustable width 630mm mm Fully adjustable support bracket (left, right, up, down) Rubber mounted feet VAT AS Mini Motorcycle Lift The lift is made from a solid steel construction with a durable powder coat finish. It can be placed quickly under the frame or engine of the motorcycle. Includes rubber-coated fully adjustable cradles 0.5T Capacity (500Kg) Dimensions (L X W X H) 450mm x 150mm x 90mm Min Height 90mm (Without cradles) Max Height 500mm ( With Cradles) Weight 14.5Kg VAT Automotech was established in 1972 Call now:

29 Call now: AS-0901F 20T Press 20T hydraulic pump Floor mounted Movable / lockable. Direct push ram (not bottle jack type) Multi position bed 0mm- 490mm Ram stroke 145mm 180 +VAT AS-0601B 2.0 Tonne Folding Engine Crane Lift capacity 2.0T Four lift positions 2000Kg, 1500Kg, 1000Kg, 500Kg Maximum lift height to hook 2340mm High speed hydraulic pump Weight 80Kg 110 +VAT AS-0101H 0.5T 2 Stage Transmission Jack The jack has a lifting range from 820mm mm. With a fully adjustable cradle and tie down chains. 0.5T capacity Fully adjustable cradle Min height 820mm Max height 1740mm Steel casters High speed hydraulic foot pump Precision lowering valve 103+VAT AS-0102A 0.6 Tonne Transmission Jack A robust and useful piece of equipment for any workshop. Lift capacity 0.6T Minimum height 1140 mm Maximum height 1950mm VAT AS-1102B Hydraulic Pipe Bender Solid steel construction with durable powder coat finish. 16T Powerful Hydraulic Ram Includes 8pc cast Iron formers. 1/2 3/4 1 11/4 11/2 2 21/2 3 (15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm) 104 +VAT All our new equipment comes with 12 months warranty as standard

30 Specialists in vehicle lifts and garage equipment Garage Equipment AS-200/300 Air Compressor 10.6cfm 200L tank / receiver 300L / min (10.6cfm) cast iron pump 3Kw (4Hp) Twin capacitor start Slow running pump (less noise / less wear) Oil lubricated C.E. approved 380 +VAT AS-21/200 Air Compressor 6.7cfm 21 litre tank / receiver 192 l/ min (6.7cfm ) cast iron pump (2hp) 240v (with plug) Air outlet with regulator Includes air hose and coupling Oil lubricated for long life Cast iron pump for long life 100 +VAT AS-80LP Polyethylene 80L reservoir (you can see the oil clearly. The unit will not rust) Rotary pump or gravity drain top Adjustable height Bowl diameter 440mm Mobile with coasters AS-36L Polyethylene 36L reservoir (you can see the oil clearly. The unit will not rust) Drain bowl with filter Adjustable height Max height 1600mm Bowl diameter 440mm Mobile with coasters VAT VAT Automotech was established in 1972 Call now:

31 Call now: Max 295mm AS-0701D 2T High Position Jack Stand 2T capacity 1250mm Minimum Height 2130mm Maximum Height AS-3812 Air Operated Portable Pneumatic Jack 2T capacity Lightweight design at only 14Kg Easy to use operating valve Safety valve as standard Minimum height: 115mm Maximum lifting height: 295mm Overall width: 250mm Overall length 400mm Lifting time 3 seconds Operating pressure 145Psi / 10Bar 162 +VAT VAT Thread 135mm AS-1812 Air Operated Portable Pneumatic Trolley Jack 2T capacity Lightweight design at only 16Kg Easy to use operating valve Safety valve as standard Minimum height: 115mm Maximum lifting height: 295mm Overall width: 250mm Overall length 1050mm Lifting time 3 seconds Operating pressure 145Psi / 10Bar 182 +VAT AS-1813 Air Operated Portable Pneumatic Trolley Jack 2T capacity Lightweight design at only 16Kg Easy to use operating valve Safety valve as standard Minimum height: 150mm Maximum lifting height: 400mm Overall width: 250mm Overall length 1050mm Lifting time 3 seconds Operating pressure 145Psi / 10Bar 192 +VAT All our new equipment comes with 12 months warranty as standard

32 Vist the website Automotech Services Ltd Tel: Fax: Website: Unit 6, Oakhurst Park, The Levels, Brereton, Rugeley, Staffordshire, WS15 1RD Prices effective from 1st October Prices and products are subject to change without notice. All prices exclude VAT and delivery