Hyva Pumps Introduction
|
|
- Brianne Morris
- 7 years ago
- Views:
Transcription
1 Introduction Hydraulic pumps Hyva offers a complete range of gear and piston pumps with a displacement of 20 until 11 cm /rev and a working pressure up to 50 bar. Gear pumps rite series The main advantages of the RITE gear pumps are: Top quality pump i-directional Rear and side mounting of the hoses maintenance free? no standstill vailable in and 4 holes version Piston pumps For high pressure and long continuous use we strongly advise to use a Hyva piston pump. esides the standard Hyva pump range listed in this catalogue Hyva offers a number of special pumps for truck applications. Special gear and piston pumps available on request ouble gear pumps ouble piston pumps Piston pumps for engine P.T.O. with by-pass valve Pumps produced by third parties like Parker, Sunfab and others. Pump elongation adaptors ode hydraulic pumps Gear pump - 07L - I - 4H - R extra code mounting holes rotation displacement in litres/min. always pump pump type R = RITE series H = UNI H; holes 4H = ISO 4H; 4 holes L = anti clockwise seen from front side of the pump R = clockwise seen from front side of the pump I = I-rotational Gear pump Piston pump ode hydraulic pump kits suction connection pressure connection displacement in litres/min. = straight connection = 90 connection = straight connection = 90 connection pump type U = Gear pump UNI H = Gear pump rite ISO 4H PQ = Piston pump ISO 4H PG-E / / RV
2 Gear pumps UNI H The pressures that matter in application of pumps are: Max. continuous pressure; pressure allowed constantly, without peaks. Max, intermittent pressure; pressure allowed for maximum 20 seconds. Max. peak pressure; pressure allowed for a short interval of max 8 seconds. For tippers we generally work with max. intermittent max. 20 s max. 8 s pressure as the tipping cycle does not require maximum pressure for long intervals. For moving floor 1) max. pressure 2) max. intermittent ) max. continuous pressure trailers and cranes we advise to use piston pumps. Piston Pumps require extra attention when it comes to suction characteristics. Rotation Frequency (RF) should not be to high as this negatively influences the suction performance of the pump, especially when the pump is mounted above the suction connection to the oil tank. Max. Self Priming Speed (MSPS) is the speed allowed for which the pump suction still performs well, with pump fitted above tank level. Max. rotation frequency, allowed with pump below tank. p (bar) 1) 2) ) Gear pumps UNI H: I-Rotational Part no. escription displace- weight kit no. suction suction press. press. rotation work Gear pump 020L-I-H 20 cm³ 5. kg U020 G½ 1¼ G½ ¾ bar Gear pump 025L-I-H 25 cm 5,7 kg U025 G¾ 1¼ G¾ ¾ bar Gear pump 02L-I-H 2 cm³ 6.0 kg U02 G¾ 1¼ G¾ ¾ bar 12 I-Rotational gear pump Part no. escription Gear pump 020L-I-H Gear pump 025L-I-H Gear pump 02L-I-H PG-E / / RV
3 Gear pumps UNI H Gear pumps UNI H series: L+R-Rotational Part no. escription displace- weight kit no. suction suction press. press. rotation work Gear pump 27L-L-H 26 cm 9,8 kg U127 G¾ 1¾ G¾ ¾ bar Gear pump 27L-R-H 26 cm 9,8 kg U227 G¾ 1¾ G¾ ¾ bar 12 Left-Rotational gear pump Part no. escription Gear pump 27L-L-H Gear pump 27L-R-H PG-E / / RV
4 Gear pumps Uni H rite Gear pumps UNI H: I-Rotational Part no. escription displace- weight kit no. suction suction press. press. rotation work Gear pump 05L-I-H 4 cm 12 kg U04 G¾ 1¼ G¾ ¾ bar Gear pump 052L-I-H 51 cm 1 kg U052 G1 1¾ G bar Gear pump 061L-I-H 61 cm 1,5 kg U061 G1 1¾ G bar Gear pump 082L-I-H 81 cm 15,5 kg U082 G1 1¾ G bar Ø12 Ø7 I-Rotational gear pump E E Ø25 Part no. escription E Gear pump 05L-I-H Gear pump 052L-I-H Gear pump 061L-I-H Gear pump 082L-I-H PG-E / / RV
5 Gear pumps ISO 4H RITE Gear pumps ISO 4H R series: I-Rotational Part no. escription displace- weight kit no. suction suction press. press. rotation work Gear pump 05L-I-4H-R 5 cm³ 12.6 kg 05 G¾ 1¼ G¾ ¾ bar Gear pump 052L-I-4H-R 52 cm³ 1.5 kg 052 G1 1¾ G1 ¾ bar Gear pump 061L-I-4H-R 61 cm³ 14.1 kg 061 G1 1¾ G1 ¾ bar Gear pump 07L-I-4H-R 7 cm³ 15.1 kg 07 G1 1¾ G bar Gear pump 082L-I-4H-R 82 cm³ 16.1 kg 082 G1 1¾ G bar Gear pump 092L-I-4H-R 92 cm³ 19.4 kg 092 G1¼ 1¾ G1¼ bar Gear pump 11L-I-4H-R 11 cm³ 20.5 kg 11 G1¼ 1¾ G1¼ bar i-rotational gear pump 80 Ø12.5 E E Ø80 80 Part no. escription E Gear pump 05L-I-4H-R Gear pump 052L-I-4H-R Gear pump 061L-I-4H-R Gear pump 07L-I-4H-R Gear pump 082L-I-4H-R Gear pump 092L-I-4H-R Gear pump 11L-I-4H-R PG-E / / RV
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationTruck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY17-8200/UK March 2004
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK March 2004 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
More informationWASTE OIL DRAINERS 99. Waste oil drainers
WASTE OIL DRAINERS 99 8 100 WASTE OIL DRAINERS wheel-mounted for drums 20/220 kg Art. 42050 (20/60 kg) Art. 42000 (180/220 kg) Art. 42050 Waste oil drainer for tanks or drums composed of: art. 80050 Trolley
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationRexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFlow divider (flow distributor), type TQ
Flow divider (flow distributor), type TQ Pressure p max = 0 bar Flow Q CN max = 00 lpm Share ratio = :. General Task Flow dividers type TQ are self-regulating valves, which largely irrespective of the
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER: CONTACT PERSON: DATE: E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER : - SUPPLIER : CONTACT PERSON : DATE : E-mail: VALIDITY: Dear In the attached file you will find the Proposal and specification(s) for the ASK
More informationTRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL
TRUCK MOUNTED KNUCKLE BOOM HYDRAULIC CRANE PROPOSAL CUSTOMER: SUPPLIER: CONTACT: DATE: E-mail: VALIDITY: 1 month Dear Sir, In the attached file you will find the proposal and specification(s) for the ASK
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationACCUMULATOR INSTALLATION
7001-7 ACCUMULATOR INSTALLATION BRAKE ACCUMULATORS I 308L93 Rae 7-59710 Issued 6-93 Printed in U.S.A 7001-8 Removal ACCUMULATOR VALVE 1. Park the machine on a level surface and lower the. loader bucket
More informationRickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
More informationEXPORT w w w. k r a n m a n. c o m
EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load
More informationGoTo Europe Focused Delivery Program. Product Overview Hydraulics
GoTo Europe Focused Delivery Program Product Overview Hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have become an important
More informationREPAIR INSTRUCTIONS UNDER BODY CYLINDER (UM, UL)
Table of contents 1. Introduction... 3 1.1. Scope of use... 3 1.2. General remarks... 3 1.3. Contact Hyva... 3 1.4. Precautions... 4 1.5. Spare parts... 4 1.5.1. Prior to use... 4 1.6. Recycling and Reuse
More informationWWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES
WWW.SMETS-TECHNOLOGY.COM COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK ENGLISH 01. 2013 INNOVATIONS FOR POWERFUL PERFORMANCES COMBI. 7 SW COMBINED. SEWER. CLEANING. TRUCK PAGE 02 ENGLISH STATUS 01. 2013
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationHydrostatic closed loop Bosch Rexroth. Fuel tank 180 l 180 l
R6480 RTH5.26S MACHINE MODEL ENGINE TRANSMISSION AXLES AND BRAKES PERFORMANCE WEIGHTS TANKS CAPACITIES HYDRAULIC CIRCUIT DIMENSIONS CONFORMTY TO STANDARDS Rotating telescopic forklift Maximum lifting capacity
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationPTO OWNER S MANUAL ALLISON FAMILY CODE. pag.1
PTO OWNER S MANUAL FAMILY CODE ALLISON pag.1 CONTENTS GENERAL INFORMATION Safety information...3 OMFB P.T.O. Safety Label Instructions...6 Foreword...7 INSTALLATION INSTRUCTIONS Mounting the PTO on the
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
More informationGoTo Europe Focused Delivery Program. Product overview industrial and mobile hydraulics
GoTo Europe Focused Delivery Program Product overview industrial and mobile hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationPNEUMATIC TOGGLE SWITCHES
CONTROLS PNEUMATIC TOGGLE SWITCHES AIR00* SERIES Single Control Part No Kit No (indludes airline & fi ttings) 100.1.24 AIR001 Twin 100.1.42 AIR002 Triple 100.1.60 AIR003 Quad 100.1.122 AIR004 18/07/2008
More informationDuraForce HPV Variable Pumps for Closed Loop Operation
DuraForce HPV Variable Pumps for Closed Loop Operation Table of Contents Contents The closed loop 4 Specifications and Performance 5 Model Codes 6 Operational parameters Life time recommendations 8 Filtration
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationBUGGY SETUP GUIDE. Volume GOKARTSUSA GY6 150, CN250. Buggy Setup Guide
BUGGY SETUP GUIDE Volume 1 GOKARTSUSA GY6 150, CN250 Buggy Setup Guide GY6 150, CN250 DUNE BUGGY Buggy Setup Guide GOKARTSUSA.COM 2000 Highway 50 S. Lake Tahoe, CA 96150 Phone 800.603.1437 2 Table of Contents
More informationQPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
More informationASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE
Adress: FETIH AREA ADANA RINGROAD NO:113 ASK 40 TK 4+2 FULL FOLDING HYDRAULIC CRANE DESCREPTION UNITE OF MEASURE L3+2 L4+2 L5+2 L6 Maksimum hidrolik uzanma ( yatay) Maximum hydraulic outreach (Ver.) 14,45
More informationSUSTAINABLE WEED MANAGEMENT WITH HOT WATER
SUSTAINABLE WEED MANAGEMENT WITH HOT WATER The environmentally friendly solution for effective weed management THERMAL WEED MANAGEMENT 02 SUSTAINABLE HOT WATER TECHNOLOGY 03 EXPERTS TO THE CORE For more
More informationThe Upper Loading & Compacting Hydraulic Garbage Compactor is a rapid and an economic solution in collecting garbage.
The Upper Loading & Compacting Hydraulic Garbage Compactor is a rapid and an economic solution in collecting garbage. It provides a modern, clean and an innovative appearance for the environment. It has
More informationMANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
More information1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
More information"A" Series Variable Displacement Piston Pumps Single Pump, "OBE" Type Electro-Hydraulic Proportional Pressure & Flow Control Type
Single Pump, "OBE" Type Electro-Hydraulic Proportional & Flow Type Input Signal for Safety valve Input Signal for Flow Amplifier Proportional Solenoid Sensor Valve Piston (S Input Voltage L) Performance
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
More informationIVECO CHASSIS DAILY 70C21D (4x2)
(Similar vehicle) Base on: IVECO CHASSIS DAILY 70C21D (4x2) MAGIRUS FIRE FIGHTING AND RESCUE VEHICLE Page 1 CHASSIS SPECIFICATIONS CHASSIS Manufacturer: Model: IVECO 70C21 D Front axles admissible weight:
More informationOperating Instructions Parts List Manual Scissor Lift Pallet Truck
Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 1 HYDRAULIC PUMPS The material needed for outcome 2 is very extensive so there
More informationSINGLE LINE CRENTRALIZED LUBRICATION SYSTEM
SINGLE LINE CRENTRALIZED LUBRICATION SYSTEM Volumetric SYSTEM 1 Ph +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - info@ilclube.it VOLUMETRIC SYSTEM INDEX INTRODUCTION 4-5 MANUAL PUMPS PRD-13 6-7
More informationOildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More informationQ Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications
Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................
More informationIndex 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationPressure Relief and Regulating Valves
Pressure Relief and Regulating Valves With blocked center directional valves and variable displacement pumps, or open center directional valves and fixed displacement pumps where fast response, low leakage
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationInternal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
More informationOCTOPUS SELECTION & INSTALLATION GUIDE
OCTOPUS SELECTION & INSTALLATION GUIDE 38mm BORE LINEAR ACTUATOR STYLES LAM & LAR A. GENERAL DESCRIPTION: The Octopus hydraulic linear actuator is a simple, efficient and reliable way of driving the rudder
More informationHydraulic Trouble Shooting
Hydraulic Trouble Shooting Hydraulic systems can be very simple, such as a hand pump pumping up a small hydraulic jack, or very complex, with several pumps, complex valving, accumulators, and many cylinders
More informationx60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
More informationVickers PVM Piston Pumps
Vickers PVM Piston Pumps 18-141cc 3 (1.1-8.6in 3 ) M-Series Industrial Variable Displacement M-Series Mobile Variable Displacement Table of Contents M Series Variable Displacement Piston Pumps Principles
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationHydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
More information912. The engine for construction equipment.
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
More informationDrum Brake Owners Manual
Drum Brake Owners Manual TIE DOWN ENGINEERING, Inc. 5901 Wheaton Drive, Atlanta, GA 30336 www.tiedown.com (404) 344-0000 Fax (404) 349-0401 2007 TIE DOWN ENGINEERING, INC. ALL RIGHTS RESERVED Instruction
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationHYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
More informationGeneral Background. Closed Circuit Hydraulic Systems. Closed Circuit Hoisting. Safety Problems with Closed Circuit Hoisting
Page 1 of 5 General Background High pressure, variable displacement piston hydraulic systems provide the best performance, efficiency and component life for use in high duty cycle offshore cranes. Piston
More informationPure Efficiency. C.C.I.A.A.: N REA. 0195268 Cod. Fiscale e P. IVA: 00483230173 Capitale Sociale versato 100.000,00
Pure Efficiency. The need to significantly reduce the production costs to remain competitive on the global market and the requirement to control and lessen the environmental impact of all activities are
More information3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm
Marine Auxiliary Engine SPECIFICATIONS 3304B 56 bkw (75 bhp) 100 mhp @ 1200 rpm Shown with Accessory Equipment I-4, 4-Stroke-Cycle-Diesel Emissions...IMO compliant Displacement... 7.0 L (425 cu. in.) Bore...
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More informationCat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationDual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
More informationStellar Service Crane
Stellar Service Crane TC Series TECHNICAL SPECIFICATION GUIDE TC13 TC23 TC33 TC38 Our People. Our Products. TC SERIES TECHNICAL SPECIFICATION GUIDE The Stellar TC Series of cranes offer a combination of
More information304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -
More informationPM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT
PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate
More informationTHE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85
THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco
More informationHidrolik Pompalar Hydraulic Pumps
25 GRUBU ÇİFT DÖNÜŞLÜ DİŞLİ POMP 25 GROUP BI-ROTTIONL GER PUMPS PTO mili saat yönünde (SĞ) The PTO shaft is CW rotating. PTO mili saatin tersi yönünde (SOL) The PTO shaft is CCW rotating. Giriş ve çıkış
More informationPVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More informationSpecifications 860-10000KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 201608-IV NINGBO
More informationBOWIE PUMPS OPERATION - MAINTENANCE
BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped
More informationFailure to comply with the following cautions and warnings could cause equipment damage and personal injury.
1.0 IMPORTANT RECEIVING INSTRUCTIONS Visually inspect all components for shipping damage. Shipping Damage is not covered by warranty. If shipping damage is found, notify carrier at once. The carrier is
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationP2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationexactly what is needed
JUNIOR For many years of low-maintenance drainpipe cleaning Of course you are familiar with the benefits of drainage in the field or in the greenhouse. Crops grow better and working conditions for preparing
More informationN/NH Truck-mounted fire pump series
N/NH Truck-mounted fire pump series Normal pressure pump type N Combined normal- and high-pressure fire pump type NH Certified according to EN 1028 and UL classified Rosenbauer - N/NH Truck-mounted fire
More informationDamcos. LPU-D for double-acting actuator. Product Data Sheet November 2014 SD 1502-2E06
Damcos LPU-D for double-acting actuator Product Data Sheet November 2014 SD 1502-2E06 TM Damcos LPU-D November 2014 LPU-D The LPU-D is designed for the control of double-acting actuators requiring hydraulic
More informationHYDRA-GRENE - A Powerful Partner for the Industry
HYDRA-GRENE - A Powerful Partner for the Industry Quality products and recognized brands As a Danfoss Sales & Service Partner, Hydra has in-house specialists. We offer PLUS +1 programming and flexible
More informationHydraulic Air Riveter. Operation Manual RC197 RC198. Recommend for mass production line industrial area. Page 1
Hydraulic Air Riveter Recommend for mass production line industrial area Operation Manual RC197 RC198 Page 1 CONTENTS 1 Important Safety Rules 2 Tool Specification 2.1 Nomenclature 2.2 Technical Data 3
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More information