info index 10.1 HYDROFLEX HYDRAULICS ROTTERDAM B.V. t. +31 (0) f. +31 (0) e.
|
|
|
- Dennis McKinney
- 7 years ago
- Views:
Transcription
1 DIN 24º+60º MULTISEAL DKM-L.8 DIN 24º CES DIN 24º+60º MULTISEAL DKM-L 45º.9 KOMATSU METR. DIN 24º+60º MULTISEAL DKM-L 90º DIN 24º DKOS 45º.8 REF DIN 24º DKOL DIN 24º DKOS KÄRCHER.7 DIN 24º DKOS 90º DIN 24º CEL KÄRCHER DIN 24º DKOL 45º DIN 24º DKOL 90º DIN 24º BEL JIS 30º BSPP AGR-F 60º + Flatseal BSPP DRF Flatseal BSPP DKR 90º 60º BSPP DKR 60º BSPP DKR 45º 60º BSPP AGR-K BSPT 8558 DIN 24º BES 90º DIN 24º BEL 90º RNM METR DIN 24º BES RNM METR DKOR 60º BSPP DKOR 45º 60º BSPP DKOR 90º 60º BSPP ORFS UNF ORFS 45º UNF ORFS 90º UNF.18 FL3 SAE 3000 PSI DKJ 45º 37º JIC UNF AGN NPT(F) DKJ 37º JIC UNF RNR ORFS UNF RNR AGJ 37º JIC UNF DKJ 90º 37º JIC UNF FL3 45º SAE 3000 PSI info 14 index 15.1
2 WEO BSPP DE WEO BSPP-DE WEO WEO METR WEO WEO WEO WEO 8793 FL6 90º CAT WEO 8790 FL6 45º CAT WEO 8787 FL6 CAT WEO FL6 90º SAE 6000 PSI WEO FL6 45º SAE 6000 PSI WEO FL6 SAE 6000 PSI FL3 90º SAE 3000 PSI DIN 24º CES.26 DKOR 60º BSPP DKJ 90º 37º JIC UN DKOR 45º 60º BSPP ORFS UN FL6 45º SAE 6000PSI FL3 SAE 3000PSI FL6 45º CAT DKJ 45º 37º JIC UN FL3 45º SAE 3000PSI FL6 90º CAT FL3 90º SAE 3000PSI BSPP DKJ 37º JIC UN AGR 60º + Flat BSPP DIN 24º DKOS 90º KÄRCHER AGJ 37º JIC UN.29 FL6 CAT ORFS 90º UN KÄRCHER DIN 24º DKOS 45º AGN NPT(F).29 FL6 90º SAE 6000PSI ORFS 45º UN DIN 24º DKOS KÄRCHER DKOR 90º 60º BSPP FL6 SAE 6000PSI BSPP.38
3 serie serie SKIVE SKIVE 1ST Pershuls Jupe de sertissage Crimp socket 2ST - 4SP Pershuls Jupe de sertissage Crimp socket 82 (PF11) INCH MM Ø A B Fe/Zn 1/ / / / / / , , / / (PF12) 8240 (PF13) INCH MM Ø A B Ø A B Fe/Zn Fe/Zn 3/ / / / / / / , / / , serie serie NO SKIVE NO SKIVE 1SN - 2SN Pershuls Jupe de sertissage Crimp socket T1 Pershuls Jupe de sertissage Crimp socket 8231 (PF22) INCH MM Ø A B Fe/Zn 3/ , / , / , / , / , / , / , , / , / , , (FE-X) INCH MM Ø A B Fe/Zn 3/ / / / / / , / serie / 8279 NO SKIVE serie NO SKIVE R7 Pershuls Jupe de sertissage Crimp socket R7 - R8 Pershuls Jupe de sertissage Crimp socket 8279 (PF21) INCH MM Ø A B Fe/Zn 5/ , / , (PF23) INCH MM Ø A B Fe/Zn 3/ , / , / / /
4 serie (EX) serie NO SKIVE R6-3TE Pershuls Jupe de sertissage Crimp socket SKIVE 1SN - 2SC* - 2K *(1/4 t/m 1 ) Pershuls Jupe de sertissage crimp socket 3407 (PF4) INCH MM Ø A B AISI 316 Ti 1/ / / , / / / , , / / ,2 63, (PF1) INCH MM Ø A B AISI 316 Ti 3/ ,5 27, /4 6 20,6 30, / ,6 30, /8 23, / , / , / ,5 42, ,9 50, / , / ,2 63, ,4 78, serie serie SKIVE 2SN Pershuls Jupe de sertissage Crimp socket NO SKIVE 1SN - 2SN* - 2SC* - 2K *(1/4 t/m 1 ) Pershuls Jupe de sertissage Crimp socket 3420 (PF2) INCH MM Ø A B AISI 316 Ti 1/4 6 20,5 30, / ,2 30, /8 25,4 32, / , / ,3 36, / , / , / , , (PF3) INCH MM Ø A B AISI 316 Ti 1/ , / , / , / , / , / , , / / , , serie serie NO SKIVE SKIVE 2SN Pershuls Jupe de sertissage Crimp socket 3-4SP Pershuls Jupe de sertissage Crimp socket 3432 (PF11) INCH MM Ø A B AISI 316 Ti 1-1/ ,8 59, / ,8 62, ,4 78, (PF5) INCH MM Ø A B AISI 316 Ti 1/4 6 23,8 30, / , / , / , / , , / , / ,5 62, ,
5 serie serie NO SKIVE NO SKIVE T1 (PTFE) Pershuls Jupe de sertissage Crimp socket R7-1SB Pershuls Jupe de sertissage Crimp socket 3476 (PF7) INCH MM Ø A B AISI 316 Ti 3/ , / , / ,5 29, / / , / / , (PF8) INCH MM Ø A B AISI 316 Ti 3/ ,3 27, /4 6 16,5 30, / , / , / ,9 34, / , / ,9 42, ,2 50,
6 CEL 24 DIN 3861-W 24 DIN 3861-A/B 24 DIN 3861-W 24 DIN 3865 OR-seal 24 DIN 3868 Multiseal Verbindingskoppeling Union double Connecting coupling Buitendraad metrisch Filetage mâle métrique Male thread metric INCH MM E M Fe/Zn 1/ / / / / / / Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ L M12x1, /4 6 06L M12x1, /4 6 08L M14x1, / L M14x1, /4 6 L M16x1, /4 6 12L M18x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M18x1, / L M22x1, / L M26x1, / L M22x1, / L M26x1, / L M30x / L M26x1, / L M30x / L M36x L M30x L M36x L M45x / L M36x / L M45x / L M45x / L M52x CES 24 DIN 3861-W KOMATSU 24 DIN 3861-A/B 24 DIN 3861-W 24 DIN 3865 OR-seal 24 DIN 3868 Multiseal Buitendraad metrisch Filetage mâle métrique Male thread metric 30 Wartel negatief, metrisch Tournant cône intérieur, métrique Swivel negative, metric Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ S M14x / S M16x /4 6 06S M14x1, /4 6 08S M16x1, /4 6 S M18x1, /4 6 12S M20x1, / S M16x1, /16 8 S M18x1, / S M20x1, / S M22x1, /8 S M18x1, /8 12S M20x1, /8 14S M22x1, /8 16S M24x1, / S M22x1, / S M24x1, / S M30x / S M24x1, / S M30x / S M36x / S M30x / S M36x / S M42x S M36x S M42x S M52x / S M42x / S M52x / S M52x Ø INCH MM METR. CH Fe/Zn 1/4 6 M14x1, /8 M18x1, /2 12 M22x1, /8 16 M24x1, /4 20 M30x1, M33x1, /4 32 M36x1, /2 40 M42x1,
7 OR: i.d. 6,8x1,72 Ref. 06-OR-11,0x1, O-ring O-ring Wartel metrisch Tournant métrique Swivel metric Ø INCH MM M METR. E Fe/Zn AISI 316 Ti 1/ M22x1,5 27, / M22x1,5 27, /8 35 M22x1,5 27, Pistool insteeknippel Raccord pour lance Gun fitting INCH MM Ø Ø 2 Fe/Zn 1/ / / Ø INCH MM M METR. E Fe/Zn AISI 316 Ti 35 M22x1,5 21, L 35 M22x1,5 19, /
8 OR1 8522=NBR OR1 3522=VITON OR DKOS OR1 8523=NBR OR1 3523=VITON OR DKOL 24 OR-seal DIN 3865-B 24 DIN 3861-W 24 OR-seal DIN 3865-B 24 DIN 3861-W NBR -35/+0 C VITON -25/+200 C Wartel metrisch Tournant métrique Swivel metric NBR -35/+0 C VITON -25/+200 C Wartel metrisch Tournant métrique Swivel metric Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ S M14x1, / S M16x1, /16 5 S M18x1, /4 6 06S M14x1, /4 6 08S M16x1, /4 6 S M18x1, /4 6 12S M20x1, / S M16x1, /16 8 S M18x1, / S M20x1, / S M22x1, /8 08S M16x1, /8 S M18x1, /8 12S M20x1, /8 14S M22x1, /8 16S M24x1, /2 12S M20x1, / S M22x1, / S M24x1, / S M30x / S M22x1, / S M24x1, / S M30x / S M36x / S M30x / S M36x / S M36x /SW /SW41 3/ S M42x S M36x S M42x S M52x / S M42x / S M52x / S M52x Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ L M12x1, /4 6 06L M12x1, /4 6 08L M14x1, /4 6 L M16x1, /4 6 12L M18x1, / L M12x1, / L M14x1, /16 8 L M16x1, / L M18x1, /8 08L M14x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M18x1, / L M22x1, / L M26x1, / L M22x1, / L M26x1, / L M30x / L M26x1, / L M30x / L M36x L M30x L M36x L M45x / L M36x / L M45x / L M52x / L M45x / L M52x OR1 8528=NBR OR1 3528=VITON OR DKOS-45 OR1 8529=NBR OR1 3529=VITON OR DKOS-90 NBR -35/+0 C VITON -25/+200 C 24 OR-seal DIN 3865-B 24 DIN 3861-W Wartel metrisch 45 Tournant métrique 45 Swivel metric 45 NBR -35/+0 C VITON -25/+200 C 24 OR-seal DIN 3865-B 24 DIN 3861-W Wartel metrisch 90 Tournant métrique 90 Swivel metric 90 Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/16 5 6S M14x1, / S M16x1, /4 6 06S M14x1, /4 6 08S M16x1, /4 6 S M18x1, /4 6 12S M20x1, / S M16x1, /16 8 S M18x1, / S M20x1, / S M22x1, /8 S M18x1, /8 12S M20x1, /8 14S M22x1, /8 16S M24x1, / S M20x1, / S M22x1, / S M24x1, / S M30x / S M24x1, / S M30x / S M36x / S M30x / S M36x /SW /SW41 3/ S M36x / S M42x S M36x S M42x S M52x / S M42x / S M52x / S M52x Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ S M14x1, / S M16x1, /4 6 06S M14x1, /4 6 08S M16x1, /4 6 S M18x1, /4 6 12S M20x1, /16 8 S M18x1, / S M20x1, / S M22x1, /8 S M18x1, /8 12S M20x1, /8 14S M22x1, /8 16S M24x1, / S M20x1, / S M22x1, / S M24x1, / S M30x / S M24x1, / S M30x / S M36x / S M30x / S M36x /SW /SW41 3/ S M36x / S M42x S M36x S M42x S M52x / S M42x / S M52x / S M52x
9 8530 DKM/L-MULTISEAL 8531 DKM/L-45 MULTISEAL 60 DIN 3868 DIN DIN DIN 3868 DIN DIN 2353 Wartel metrisch Tournant métrique Swivel metric Wartel metrisch 45 Tournant métrique 45 Swivel metric 45 Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn 1/4 6 08L M14x1, /4 6 L M16x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M22x1, / L M26x1, Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn 1/4 6 08L M14x1, /4 6 L M16x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M22x1, / L M26x1, DKM/L-90 MULTISEAL 60 DIN 3868 DIN DIN 2353 Wartel metrisch 90 Tournant métrique 90 Swivel metric 90 Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn 1/4 6 08L M14x1, /4 6 L M16x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M22x1, / L M26x1,
10 OR1 8536=NBR OR1 3536=VITON OR DKOL-45 OR1 8537=NBR OR1 3537=VITON OR DKOL OR-seal DIN 3865-B 24 DIN 3861-W 24 OR-seal DIN 3865-B 24 DIN 3861-W NBR -35/+0 C VITON -25/+200 C Wartel metrisch 45 Tournant métrique 45 Swivel metric 45 NBR -35/+0 C VITON -25/+200 C Wartel metrisch 90 Tournant métrique 90 Swivel metric 90 Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ L M12x1, /4 6 06L M12x1, /4 6 08L M14x1, /4 6 L M16x1, /4 6 12L M18x1, / L M14x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M18x1, / L M22x1, / L M26x1, / L M22x1, / L M26x1, / L M30x / L M26x1, / L M30x / L M36x L M30x L M36x L M45x / L M36x / L M45x / L M52x / L M45x / L M52x Ø Ø INCH MM DIN 2353 METR. CH Fe/Zn AISI 316 Ti 3/ L M12x1, /4 6 06L M12x1, /4 6 08L M14x1, /4 6 L M16x1, /4 6 12L M18x1, /16 8 8L M14x1, /16 8 L M16x1, / L M18x1, /8 L M16x1, /8 12L M18x1, /8 15L M22x1, / L M18x1, / L M22x1, / L M26x1, / L M22x1, / L M26x1, / L M30x / L M26x1, / L M30x / L M36x L M30x L M36x L M45x / L M36x / L M45x / L M52x / L M45x / L M52x
11 BEL BES ØD DIN 2353 ØD DIN 2353 Rechte standpijp Lisse nu Straight stand pipe Rechte standpijp Lisse nu Straight stand pipe Ø INCH MM DIN 2353 E Fe/Zn AISI 316 Ti 3/ L / L /16 5 L /4 6 06L /4 6 08L / L /16 8 L /8 L /8 12L /8 15L / L / L / L / L / L / L / L L / L / L Ø INCH MM DIN 2353 E Fe/Zn AISI 316 Ti 1/4 6 S /4 6 12S / S /8 14S / S / S / S / S / S / S / S S S / S / S / S BEL-90 BES-90 ØD DIN 2353 Haakse standpijp Lisse nu coudé Elbow stand pipe ØD DIN 2353 Haakse standpijp Lisse nu coudé Elbow stand pipe Ø INCH MM DIN 2353 M E Fe/Zn 3/ L 25,5 41, /4 6 06L 28,5 42, /4 6 08L 28,5 43, / L 28,5 43, /16 8 L 30, /8 08L 28,5 43, /8 L 32 53, /8 12L 33, / L 33, / L / L 42 59, / L / L / L 61 73, L 80,5 84, / L Ø INCH MM DIN 2353 M E Fe/Zn 1/4 6 S 26,5 44, /4 6 12S 28,5 44, / S 29 46, /8 14S 29 60, /8 16S 42 63, / S 41 61, / S 42 63, / S 49 80, / S / S 61 85, S 80,5 94, S 80,5 99, / S 80,5 99, / S / S
12 RNM RNM Banjo oog metrisch Oeil de banjo métrique Banjo eye metric Banjo bout metrisch Boulon de banjo métrique Banjo bolt metric INCH MM Ø M E Fe/Zn 3/16 5, /4 6 24, / , / ,5 12, / , / , / , / , / , / , / , / , / , / , / , / / , / / / Ø INCH MM E METR. CH Fe/Zn Cu 21 Mx M M12x1, M M14x1, M M16x1, M M18x1, M M22x1, M M24x1, M M26x1, M M30x1, M AGR-F AGR-K 60 Globeseal DIN 3863 Flatseal Flatseal Buitendraad BSPP Filetage mâle BSPP Male thread BSPP Threadseal Buitendraad BSPT Filetage mâle BSPT Male thread BSPT Ø INCH MM BSPP CH Fe/Zn AISI 316 Ti 3/16 5 G1/ /16 5 G1/ /4 6 G1/ /4 6 G1/ /4 6 G3/ /4 6 G1/ /16 8 G1/ /16 8 G3/ /16 8 G1/ /8 G1/ /8 G3/ /8 G1/ /8 G1/ /2 12 G3/ /2 12 G1/ /2 12 G5/ /2 12 G3/ /8 16 G1/ /8 16 G5/ /8 16 G3/ /4 20 G3/ /4 20 G G G1.1/ /4 32 G1.1/ /4 32 G1.1/ /2 40 G1.1/ /2 40 G G Ø INCH MM BSPT CH Fe/Zn AISI 316 Ti 3/16 5 R1/ /4 6 R1/ /4 6 R1/ /4 6 R3/ /16 8 R3/ /8 R3/ /8 R1/ /2 12 R1/ /8 16 R3/ /4 20 R3/ /4 20 R R R1.1/ /4 32 R1.1/ /2 40 R1.1/ R
13 DKR Globeseal DIN DIN 3863 Wartel BSPP Tournant BSPP Swivel BSPP Ø INCH MM BSPP CH Fe/Zn AISI 316 Ti 3/16 5 G1/ /16 5 G1/ /4 6 G1/ /4 6 G1/ /4 6 G3/ /4 6 G1/ /16 8 G1/ /16 8 G3/ /16 8 G1/ /8 G1/ /8 G3/ /8 G1/ /8 G3/ /2 12 G3/ /2 12 G1/ /2 12 G5/ /2 12 G3/ Ø INCH MM BSPP CH Fe/Zn AISI 316 Ti 5/8 16 G1/ /8 16 G5/ /8 16 G3/ /4 20 G5/ /4 20 G3/ /4 20 G G3/ G G1.1/ G1.1/ /4 32 G /4 32 G1.1/ /4 32 G1.1/ /2 40 G1.1/ /2 40 G1.1/ /2 40 G /2 40 G1.1/ G JIS DRF 30 Wartel BSPP negatief Tournant BSPP negatif Swivel BSPP negative Flatseal Wartel vlakdichtend Tournant étanchéité plat Swivel flatseal Ø INCH MM BSPP CH Fe/Zn 1/4 6 G1/ /8 G3/ /2 12 G1/ /4 20 G3/ G Ø INCH MM BSPP CH Fe/Zn AISI 316 Ti 1/4 6 G1/ /4 6 G3/ /16 8 G1/ /16 8 G3/ /8 G3/ /8 G1/ /2 12 G3/ /2 12 G1/ /2 12 G5/ /2 12 G3/ /8 16 G5/ /8 16 G3/ /4 20 G3/ /4 20 G G G1.1/ /4 32 G1.1/ /4 32 G1.1/ /2 40 G1.1/ G
14 DKR DKR-90 Globeseal DIN DIN 3863 Globeseal DIN DIN 3863 Wartel BSPP 45 Tournant BSPP 45 Swivel BSPP 45 Wartel BSPP 90 Tournant BSPP 90 Swivel BSPP 90 Ø INCH MM E BSPP CH Fe/Zn AISI 316 Ti 3/ G1/ / ,5 G1/ / G1/ /4 6 15,5 G1/ /4 6 15,5 G3/ /4 6 22,5 G1/ / ,5 G1/ / G3/ / ,5 G1/ /8 20 G1/ /8 21 G3/ /8 22,5 G1/ / ,5 G3/ / ,5 G1/ / G5/ / ,5 G3/ / ,5 G1/ / G5/ / G3/ / G5/ / ,5 G3/ / G ,5 G3/ G ,5 G1.1/ / G / ,5 G1.1/ / G1.1/ / G1.1/ / ,5 G ,5 G1.1/ Ø INCH MM E BSPP CH Fe/Zn AISI 316 Ti 3/ G1/ / ,5 G1/ /4 6 28,5 G1/ /4 6 30,5 G1/ /4 6 30,5 G3/ /4 6 30,5 G1/ / ,5 G1/ / ,5 G3/ / ,5 G1/ /8 34 G1/ /8 38,5 G3/ /8 41 G1/ /8 41 G1/ / G3/ / G1/ / G5/ / ,5 G3/ / G1/ / G5/ / G3/ / G5/ / ,5 G3/ / ,5 G ,5 G3/ ,5 G G1.1/ / G1.1/ / ,5 G1.1/ / G1.1/ /2 40 8,5 G1.1/ ,5 G1.1/ OR OR DKOR DKOR-45 NBR -35/+0 C VITON -25/+200 C 60 OR-seal ISO DIN 3863 Wartel BSPP Tournant BSPP Swivel BSPP NBR -35/+0 C VITON -25/+200 C 60 OR-seal ISO DIN 3863 Wartel BSPP 45 Tournant BSPP 45 Swivel BSPP 45 Ø INCH MM BSPP CH Fe/Zn 1/4 6 G1/ /8 G3/ /2 12 G1/ /8 16 G5/ /4 20 G3/ G G1.1/ /4 32 G1.1/ /4 32 G1.1/ /2 40 G1.1/ /2 40 G G Ø INCH MM E BSPP CH Fe/Zn 1/ G1/ /8 17 G3/ / ,5 G1/ / ,5 G5/ / ,5 G3/ G G1.1/ / ,5 G1.1/ / ,5 G1.1/ / G1.1/ / G ,5 G
15 OR DKOR OR-seal ISO DIN 3863 Flatseal NBR -35/+0 C VITON -25/+200 C Wartel BSPP 90 Tournant BSPP 90 Swivel BSPP 90 Wartel vlakdichtend 90 Tournant étanchéité plat 90 Swivel flatseal 90 Ø INCH MM E BSPT CH Fe/Zn 1/4 6 27,0 G1/ /8 35,0 G3/ / ,5 G1/ / ,5 G5/ / ,5 G3/ ,5 G ,0 G1.1/ / ,0 G1.1/ / ,5 G1.1/ /2 40 1,5 G1.1/ /2 40 8,5 G ,5 G Ø INCH MM BSPP CH Fe/Zn 1/4 6 G1/ /8 G3/ /2 12 G1/ /4 20 G3/ G /4 32 G1.1/ RNR RNR Banjo oog BSPP Oeil de banjo BSPP Banjo eye BSPP Banjo bout BSPP Boulon de banjo BSPP Banjo bolt BSPP Ø INCH MM INCH MM M E Fe/Zn 1/4 6 1/8 9, /4 6 1/4 13,6 21, /4 6 3/8 16,8 24, /16 8 1/4 13,6 21, /16 8 3/8 16,8 24, /8 1/4 13,6 21, /8 3/8 16,8 24, /8 1/2 21,5 24, /2 12 3/8 16,8 30, /2 12 1/2 21,5 31, /2 12 5/8 23,0 33,5 23, /2 12 3/4 26,8 37, /8 16 5/8 23,0 33,5 23, /8 16 3/4 26,8 38, /4 20 3/4 26,8 39, / ,5 48, ,5 48, Ø INCH MM E BSPP CH Fe/Zn Cu 19 G1/ G1/ G3/ G1/ G5/ G3/ G
16 AGN AGJ Threadseal Threadseal NPT(F) NPSM 37 JIC Buitendraad NPTF Filetage mâle NPTF Male thread NPTF Buitendraad UN / UNF Filetage mâle UN / UNF Male thread UN / UNF Ø INCH MM NPTF CH Fe/Zn AISI 316 Ti 3/16 5 1/ /16 5 1/ /4 6 1/ /4 6 1/ /4 6 3/ /16 8 1/ /16 8 3/ /8 1/ /8 3/ /8 1/ /2 12 3/ /2 12 1/ /2 12 3/ /8 16 1/ /8 16 3/ /4 20 3/ / , , /4-11, / /4-11, / /2-11, / , /2-11, , INCH MM Ø CH Fe/Zn AISI 316 Ti 1/4 6 7/16-20 UNF /4 6 1/2-20 UNF /4 6 9/16-18 UNF /16 8 1/2-20 UNF /16 8 9/16-18 UNF /16 8 3/4-16 UNF /8 1/2-20 UNF /8 9/16-18 UNF /8 3/4-16 UNF /8 7/8-14 UNF /2 12 3/4-16 UNF /2 12 7/8-14 UNF / /16-12 UN /8 16 3/4-16 UNF /8 16 7/8-14 UNF / /16-12 UN / /16-12 UN / /16-12 UN / /16-12 UN /16-12 UN /16-12 UN /8-12 UN / /8-12 UN / /8-12 UN / /8-12 UN /2-12 UN ORFS DKJ Buitendraad UN / UNF / UNS Filetage mâle UN / UNF / UNS Male thread UN / UNF / UNS 37 JIC Wartel UN / UNF Tournant UN / UNF Swivel UN / UNF INCH MM Ø CH Fe/Zn 1/4 6 9/16-18 UNF /8 11/16-16 UN / /16-16 UN / UNS / /16-12 UN /16-12 UN / /16-12 UN / UN INCH MM Ø CH Fe/Zn AISI 316 Ti 3/16 5 7/16-20 UNF /4 6 7/16-20 UNF /4 6 1/2-20 UNF /4 6 9/16-18 UNF /16 8 1/2-20 UNF /16 8 9/16-18 UNF /16 8 3/4-16 UNF /8 1/2-20 UNF /8 9/16-18 UNF /8 3/4-16 UNF /8 7/8-14 UNF /2 12 9/16-18 UNF /2 12 3/4-16 UNF /2 12 7/8-14 UNF / /16-12 UN /8 16 7/8-14 UNF / /16-12 UN /4 20 7/8-14 UNF / /16-12 UN / /16-12 UN / /16-12 UN /16-12 UN /16-12 UN /8-12 UN / /8-12 UN / /8-12 UN / /8-12 UN /2-12 UN
17 DKJ DKJ JIC 37 JIC Wartel 45 UN / UNF Tournant 45 UN / UNF Swivel 45 UN / UNF Wartel 90 UN / UNF Tournant 90 UN / UNF Swivel 90 UN / UNF INCH MM E Ø CH Fe/Zn AISI 316 Ti 3/16 5 7/16-20 UNF / /16-20 UNF /4 6 14,5 1/2-20 UNF / /16-18 UNF / /2-20 UNF / ,5 9/16-18 UNF /8 19 1/2-20 UNF /8 21 9/16-18 UNF /8 21,5 3/4-16 UNF /8 25 7/8-14 UNF / /16-18 UNF / ,5 3/4-16 UNF / ,5 7/8-14 UNF / /16-12 UN /8 21 3/4-16 UNF / ,5 7/8-14 UNF / /16-12 UN / /16-12 UN / ,5 1.3/16-12 UN / ,5 1.5/16-12 UN /16-12 UN ,5 1.5/8-12 UN / ,5 1.5/8-12 UN / /8-12 UN / /8-12 UN /2-12 UN INCH MM E Ø CH Fe/Zn AISI 316 Ti 3/16 5 7/16-20 UNF / /16-20 UNF / /2-20 UNF / /16-18 UNF / /2-20 UNF / /16-18 UNF / /4-16 UNF /8 40 9/16-18 UNF /8 41 3/4-16 UNF /8 40 7/8-14 UNF / /4-16 UNF / /8-14 UNF / ,5 1.1/16-12 UN / ,5 7/8-14 UNF / /16-12 UN / ,5 1.1/16-12 UN / ,5 1.3/16-12 UN / /16-12 UN ,5 1.5/16-12 UN ,5 1.5/8-12 UN / /8-12 UN / ,5 1.7/8-12 UN /2 40 5,5 1.7/8-12 UN /2-12 UN ORFS ORFS-45 Wartel UN / UNF / UNS Tournant UN / UNF / UNS Swivel UN / UNF / UNS Wartel 45 UN / UNF / UNS Tournant 45 UN / UNF / UNS Swivel 45 UN / UNF / UNS INCH MM Ø CH Fe/Zn 1/4 6 9/16-18 UNF /4 6 11/16-16 UN / /16-16 UN /8 11/16-16 UN /8 13/16-16 UN / /16-16 UN / UNS / /16-12 UN / UNS / /16-12 UN / /16-12 UN /16-12 UN / /16-12 UN / UN INCH MM E Ø CH Fe/Zn 1/4 6 13,2 9/16-18 UNF /4 6 17,0 11/16-16 UN / ,0 11/16-16 UN /8 17,0 11/16-16 UN /8 17,0 13/16-16 UN / ,8 13/16-16 UN / , UNS / ,0 1.3/16-12 UN /16-12 UN / /16-12 UN / , UN
18 8724 ORFS FL3 SAE J PSI CODE 61 (ISO CODE ) Wartel 90 UN / UNF / UNS Tournant 90 UN / UNF / UNS Swivel 90 UN / UNF / UNS 3.19 SAE flensaansluiting Embout à bride SAE SAE flange connection INCH MM E Ø CH Fe/Zn 1/4 6 26,9 9/16-18 UNF /4 6 34,5 11/16-16 UN / ,5 11/16-16 UN /8 34,5 11/16-16 UN /8 42,2 13/16-16 UN / ,2 13/16-16 UN / , UNS / ,0 1.3/16-12 UN / ,0 1.7/16-12 UN ,0 1.7/16-12 UN / ,5 1.11/16-12 UN / , UN INCH MM SAE M Ø Fe/Zn AISI 316 Ti 1/2 12 1/ /2 12 3/ /8 16 1/ /8 16 3/ /4 20 1/ /4 20 3/4 57, / ,5 44, /4 57, ,5 44, /4 66,5 50, / ,5 44, / / , / / , / / , / / , / , / , ,5 71, /2 83,5 84, / /2 84, SF KOMATSU size INCH MM KOMATSU E Ø Fe/Zn 5/8 16 5/ K FL FL SAE J PSI CODE 61 (ISO CODE ) SAE flensaansluiting 45 Embout à bride SAE 45 SAE flange connection SAE J PSI CODE 61 (ISO CODE ) SAE flensaansluiting 90 Embout à bride SAE 90 SAE flange connection 90 INCH MM SAE E Ø Fe/Zn AISI 316 Ti 1/2 12 1/2 20, /2 12 3/ /8 16 1/ /8 16 3/4 28, /4 20 1/ /4 20 3/4 28, / , /4 28, ,5 44, / , / , / / , / / , / / , / /2 41,5 60, / , /2 41,5 60, , /2 84, INCH MM SAE E Ø Fe/Zn AISI 316 Ti 1/2 12 1/2 43, /2 12 3/4 47, /8 16 1/ /8 16 3/ /4 20 1/ /4 20 3/ / , / / , / , /4 68,5 50, / , / / , / /2 84,5 60, / / , / /2 91,5 60, / ,5 71, /2 91,5 60, ,5 71, /2 84, / /2 84, SF 45 KOMATSU size INCH MM KOMATSU E Ø Fe/Zn 5/8 16 5/ K SF 90 KOMATSU size INCH MM KOMATSU E Ø Fe/Zn 5/8 16 5/ K.18
19 FL FL6-45 SAE J PSI CODE 62 (ISO CODE ) SAE J PSI CODE 62 (ISO CODE ) 3.43 SAE flensaansluiting Embout à bride SAE SAE flange connection 3.40 SAE flensaansluiting 45 Embout à bride SAE 45 SAE flange connection 45 INCH MM SAE M Ø Fe/Zn AISI 316 Ti 1/2 12 1/2" 52 31, /2 12 3/4" 60 41, /8 16 1/2" 52 31, /8 16 3/4" 63 41, /4 20 1/2" 52 31, /4 20 3/4" 65,5 41, /4 20 1" 70 47, /4" 65,5 41, " 74,5 47, /4" /4 32 1" 74,5 47, / /4" 83, / /2" 88 63, / /4" 83, / /2" 92,5 63, /2 40 2" 97 79, /2" 92,5 63, " 1,5 79, / /2" 7, INCH MM SAE E Ø Fe/Zn AISI 316 Ti 1/2 12 1/2 21,5 31, /2 12 3/ , /8 16 1/2 21,5 31, /8 16 3/ , /4 20 1/2 21,5 31, /4 20 3/4 28,5 41, / ,5 47, /4 28,5 41, , / / , / / / / , / / / / , / , / , , FL FL-TYPE CAT 3.40 SAE J PSI CODE 62 (ISO CODE ) SAE flensaansluiting 90 Embout à bride SAE 90 SAE flange connection 90 CAT flensaansluiting Embout à bride CAT CAT flange connection INCH MM SAE E Ø Fe/Zn AISI 316 Ti 1/2 12 1/ , /2 12 3/ , /8 16 1/ , /8 16 3/ , /4 20 1/ , /4 20 3/ , / , / , , / / , / /4 90, / / , / /4 90, / /2 6 63, / , /2 6 63, , INCH MM SAE E Ø Fe/Zn 3/4 20 3/ , / ,5 47, , /4 84, / / / /2 93,5 63, / / ,
800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
Working Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
PRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
Racores Inoxidable Raccords en Acier Inox Stainless Steel Fittings Raccordi en Acciao Inossidabile
www.dicsaes.com Tarifa General Tarif Général General Price List Listino Prezzi 2014 AISI 316L Racores Inoxidable Raccords en Acier Inox Stainless Steel Fittings Raccordi en Acciao Inossidabile www.dicsaes.com
Thread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
Technical information
Technical information 5 1.1 Hose assemblies as elements in hydraulic systems Hose assemblies Hose assemblies have to perform crucial functions. Apart from transmitting power by means of liquid (hydraulic
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
Metric Hydraulic Compression Tube Fittings
Metric Hydraulic Compression Fittings T A B L E O F C O N T E N T S Introduction Index Pages A to F Pages G to L FITTINGS to Unions Straight Male Connectors Elbow Male Connectors Run Tee Male Connectors
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES. 5. Clean properly with appropriate products the part of the tube to be flared.
ASSEMBLY INSTRUCTIONS ACCORDING TO SAE J1453 FOR FLARED TUBES 1. Before to start to flare the tube check for the correct parameters of all the tools to be used and substitute 2. Cut the tube at a 90 angle
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
CAT. 0113-GB MODELS. Series. Flat-face quick-release couplings. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0113-GB NEW MODELS Flat-face quick-release couplings UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 FLAT-FACE QUICK-RELEASE COUPLINGS Features Benefits Applications Flat-face shut-off valves: easy to clean.
Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
č é é č Á Ě Č Á š Á Ó Á Á ď ú ď Š ň Ý ú ď Ó č ď Ě ů ň Č Š š ď Ň ď ď Č ý Ž Ý Ý Ý ČÚ Ž é úč ž ý ž ý ý ý č ů ý é ý č ý ý čů ý ž ž ý č č ž ž ú é ž š é é é č Ž ý ú é ý š é Ž č Ž ů Ů Ť ý ý ý Á ý ý Č Ť É Ď ň
(1.4) Thread standards
Thread milling 1 (1.4) Thread standards Threading is a very specialised field governed by numerous standards which vary depending on the area of application. Below are the most common. The main thread
Visual Index O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal ORFS O-Ring N4 XO O-Ring N4 Port Ends SAE, Metric,, JIS, K4 SAE O-Ring N4 ISO 6149 O-Ring N5 Metric O-Ring Metric Retaining Ring O-Ring Retaining Ring EOlastic Seal
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
Pipe Thread Types and Designations
Pipe Thread Types and Designations Overview: Different types of screw threads have evolved for fastening, and hydraulic systems. Of special concern are plastic-to-metal, taper/parallel threaded joints
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Charts (Section XI) www.accordintl.com Ph. (713) 641-2288 Fax (713) 641-3636 Main PAGE #
Charts (Section XI) Part No. Description Page No. Fraction, Decimal, and Millimeter Conversion Chart 2 Measurement Chart (Metric & Standard) 3 Standard (ANSI B16.5) Flange Dimension Chart 4 Metric Flange
Metric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
Safe, clean and reliable overfill protection systems. HYDRAU-FLO Safety Solutions for Liquid Filling
HYDRAU-FLO Safety Solutions for Liquid Filling Excellent Minerals Solutions Mechanical and non-pressurised fuel filling valves Safe, clean and reliable overfill protection systems Refuelling rates up to
CONDITIONS OF SALE CLAIMS ON DAMAGED PRODUCTS SALES TAX STATUS SHIPPING TERMS TERMS OF PAYMENT NOTE WARRANTY
CONDITIONS OF SALE 1. All our agreements contingent upon accidents, strike, fires and unavoidable delays, and causes beyond our control. 2. Every effort is made by us to offer equipment and/or material
British Standard Pipe BSP
British Standard Pipe BSP BSP pipe, Like American National pipe (NPT, NPSM), is designated by trade size, rather than actual diameter, which is approximately equal to the thread's Major Diameter in the
Industrial Pipe Fittings and Adapters The Fitting Authority
Industrial Pipe Fittings and Adapters The Fitting Authority Visual Index CR Male Pipe Elbow FF Pipe Nipple FFF Long Pipe Nipple RRS Male Pipe Tee DD Female Pipe Elbow Industrial Pipe Fittings DD45 Female
Industrial Pipe and Tube Fittings. Quick Reference Product Guide. McGill Hose & Coupling, Inc.
McGill Hose & Coupling, Inc. Quick Reference Product Guide Industrial Pipe and Tube Fittings Standard and Metric Sizes, Steel and Stainless Steel McGill Hose & Coupling, Inc. Quick Guide Index Parts Nomenclature
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Mars 2008. Maart 2008. Geachte cliënt,
No: 03081 Maart 2008 March 2008 Mars 2008 Geachte cliënt, Het doet ons genoegen u hiermede onze catalogus van freon slangen en fi ngen te presenteren. Onze catalogus bevat alle mogelijke slangtypes en
2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
BROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
Ermeto Original Valves
Ermeto Original Valves Visual index Non return valves RHD / p. O3 EO 24 cone end / EO 24 cone end RHV-R-ED / p. O4 RHZ-R-ED / p. O5 EO 24 cone end / Male BSPP thread ED-seal (ISO 79) / Male BSPP thread
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
24 15.09MM 11.00 36.09 1 PIPE API5LGR.B EFW BE ASME B36.10M REFER TO A3024.02
PIPE A312GR.TP304 SMLS BE ASME B36.19M 10 S-10S 6.00 19.69 1 PIPE A333GR.6 SMLS BE ASME B36.10M 3 S-80 18.00 59.06 3 PIPE A333GR.6 SMLS BE ASME B36.10M 8 S-40 6.00 19.69 1 PIPE A333GR.6 SMLS BE ASME B36.10M
Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
UNLOCK THE SOLUTION 1
UNLOCK THE SOLUTION 1 construction agriculture automation chemical plastics off-shore/land based oil & gas pulp & paper public utilities pharmaceutical marine food processing military mining forestry mobile
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS Hydraulic components POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
UNIT CONVERSIONS & FORMULAS
4, PSI UNIT CONVERSIONS & FORMULAS MEASUREMENT CONVERSION EXAMPLE 1 in. = 25.4 mm 12 in. x 25.4 = 34.8 mm 1 in. =.254 m 12 in. x.254 = 3.5 m LENGTH 1 ft. =.348 m 12 ft. x.348 = 3.68 m 1 mm =.394 in. 1
ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Metric Tube Fittings
Metric Tube Fittings Index Introduction 2 Terms & Conditions 3 Connectors teel 4 tainless teel 22 Tube teel 35 tainless teel 36 Technical ection Assembly Instructions 37-38 Tube pecifications 39-41 Conversion
BOCCOLE E RACCORDI STANDARD STANDARD FERRULES AND FITTINGS
BOCCOLE E RACCORDI STANDARD STANDARD FERRULES AND FITTINGS BOCCOLA FERRULES CODICE PART NUMBER PAGINA PAGE R1A BR1A- Pag. 63 R2A BR2A- Pag. 63 R1T BR1T- Pag. 63 R2T BR2T- Pag. 63 R1C-T1 BR1C- Pag. 64 R3
Honeywell Pressure Switches Line Guide
Honeywell Pressure Line Guide Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They re proven under pressure, in
HOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
DESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections
Series PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
2-way flow control valve with sliding throttle type SB and SQ
2-way flow control valve with sliding throttle type SB and SQ Screw-in valves for tapped holes Versions with housing Operating pressure p max = 3 bar Flow Q max = 400 lpm Design, not adjustable after installation
Dati generali General data I prodotti I.M.M. Hydraulics S.p.A sono realizzati con acciaio al carbonio (SMnPb37) controllato e certificato. Al termine della produzione i raccordi subiscono un trattamento
Flow Sensors. Convenient, Reliable and Economical Flow Measurement. THORNTON Leading Pure Water Analytics
THORTO Leading Pure Water nalytics Economical Paddlewheel Hi-Purity PF Ultrasonic Vortex Insertion-type Vortex Convenient, Reliable and Economical Flow Measurement Paddlewheel Reliable and Economical Inline
SURFOX 304 MIG & TIG 54-D 314 (120V) & 54-D 334 (230V) MARCH 2015 1.48-R 461 5. 48-R 462 2. 48-R 313 3. 48-K 419 4. 48-S 114 6. 48-S 128 7.
A 1.48-R 461 5. 48-R 462 2. 48-R 313 6. 48-S 128 3. 48-K 419 4. 48-S 114 7. 48-R 314 9.48-R 463 8. 48-R 136 10. 48-R 105 11. 48-R 254 12. 48-R 109 13. 48-R 321 14. 48-R 214 B 15. 48-K 420 16. 48-S 228
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
CRYOGENIC 2016. Cryogenic Valves. herose.com
CRYOGENIC 2016 Cryogenic Valves herose.com HEROSE worldwide HEROSE Germany HEROSE UK HEROSE Iberica HEROSE India HEROSE China For the adresses of our agencies/distributors please visit www.herose.com Headquarter
Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X
Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
Hydraulic and Pneumatic Protection
Hydraulic and Pneumatic Protection Specialist Hydraulic Caps and Plugs 50-53 Hose Protection 54-58 Hose Clamps 59-61 O-Rings and O-Ring Kits 62-65 49 Order any quantity - Split packs available SAE Butt
Genuine Service Parts for Commercial Vehicles
Genuine Service Parts for Coercial Vehicles Spicer Service Catalog Table of Contents 1 Industry Leadership 2 Spicer Compact Series Features 3 Connection Variants 5 Data Sheets for Driveshafts 5 Standard
Chief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
IDOMSZEREK GAUGES LEHREN
IDOMSZEREK DUGÓS IDOMSZEREK - MSBa SMOOTH LUG GAUGES - MSBa GRENZLEHRDORNE - MSBa IDOMSZEREK GAUGES LEHREN Oldal age Seite 4 DUGÓS ÉS GYÛRÛS MENETIDOMSZEREK 44 M -H, -LH-H, -G MSRh-g, MSRk-g MF -H, LH-H,
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
UNIK 5800/5900. Flameproof/Explosion-Proof Pressure Sensing Platform. GE Measurement & Control. High Quality. Features. Bespoke as Standard.
GE Measurement & Control UNIK 5800/5900 Flameproof/Explosion-Proof Pressure Sensing Platform The 5800 and 5900 are compact and rugged versions of the high performance UNIK 5000 pressure sensing platform
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
DRAFT 1 PIPE & PORT 4-28-06
JI Fittings DRAFT PIPE & PORT 4-8-06 The Fitting Authority 4300 Catalog JI Fittings F3T4 BPT / 30 Flare PNMT4 FNMT4 Cap V3T4 BPT / 30 Flare C3T4 BPT / 30 Flare 30 Flare F3P4 BPT / 60 Cone P4 Union G3P4
with installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
Solenoid Operated Directional Valves
INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
The One Stop Shop for Automotive Tubes and Hoses
BQAP-1013 INNOVATIVE SOLUTIONS FOR AUTOMOTIVE TUBES AND HOSES The One Stop Shop for Automotive Tubes and Hoses AUTOMOTIVE PLUMBING Catalog $2.00 USA Lab Tested - Tuff! www.brakequip.com Table of Contents
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Application Outboards Faria 5 Gauge Set* Publication No. Description Part Number Honda Code PII53606A White faced, flat lens 06300-ZW5-010ZB 6315410 Issue Date Black faced, flat
VALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Chief EZ Liner S21 PARTS MANUAL. 1999 Chief Automotive Systems, Inc.
Chief EZ Liner S21 R 1999 Chief Automotive Systems, Inc. CHIEF EZ LINER CHIEF S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Systems, Inc. warrants for one year from date of installation and/or
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
Original NiTO Couplings. NiTO Industrial Spray Guns. NiTO Leading supplier of high quality couplings for the professional market www.nito.
Original NiTO Couplings NiTO Industrial Spray Guns NiTO Leading supplier of high quality couplings for the professional market www.nito.com The complete Quick coupling programme from the leading manufacturer
Plumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
Automated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Parker Legris: Connection Solutions for Industrial Fluids
Parker Legris: Connection Solutions for Industrial Fluids Serving as a true shop window for Parker Legris' knowledge and expertise, this new catalogue strives to provide the day-to-day support you need
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
Tartalom Jegyzék. Kép / Image Sz. / No. Termék Csoport / Product Groups Oldal / Page
Tartalom Jegyzék Kép / Image Sz. / No. Termék Csoport / Product Groups Oldal / Page Teszt Pont Nyomásmérő Csatlakozó / Test Point Gauge Connectors MAS Nyomásmérő Csatlakozó / Test Point Gauge Connectors
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Heavy Duty Bolted Cylinders
Heavy Duty Bolted Cylinders COUNT ON THE HYDRAULICS EXPERT In any hydraulics system, a combination of critical components convert power into productive, efficient motion. If you re looking for superior
Variable V Area Flowmeter Rotameter The Original
Variable V Area Flowmeter Rotameter The Original 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com precise measurement of liquids