Hyspecs Transmissions Ltd. Mechanical Power Transmission Solutions

Size: px

Start display at page:

Download "Hyspecs Transmissions Ltd. Mechanical Power Transmission Solutions"

Randolf Caldwell
7 years ago
Views:

1 Hyspecs Transmissions Ltd Mechanical Power Transmission Solutions

2 Introduction HYTRANS (Hyspecs Transmissions Ltd) is a division of Hyspecs Holdings Ltd. Hyspecs Holdings Ltd is made up of: HYTRANS (Hyspecs Transmissions) HYSPECS (Hydraulic Specialties North & South Island) HYTECH (Hyspecs Technologies)

3 Our locations We employ 42 people across our branches in Auckland & Christchurch, enabling national coverage. 10 sales territories covered by our sales staff.

4 Our home bases Auckland 9 Lady Ruby Drive East Tamaki Ph: Fax: Christchurch 40 Durham Street Sydenham Ph: Fax:

5 in a nutshell HYTRANS is a 100% New Zealand owned and operated company. Our main focus is to provide engineered sales solutions & transmission advice Is located in Auckland and Christchurch, within the HYSPECS premises Exclusive NZ rights to Comer Planetary Drives (SOM) Our full line of Planetary Drives fits perfectly with existing lines of HYSPECS electric or hydraulic motors and other hydraulic accessories Wide range of transmission accessories including transmission chain & sprockets, conveyor chain, vee belts and taper lock pulleys, timing belts, shaft couplings and shaft locking bushes, AC motor controllers, conveyor components, clutches and brakes, modular belting, oil coolers & worm boxes

6 in a nutshell HYSPECS is a 100% New Zealand owned and operated company. Hyspecs was formed in 1972 as an alternative to the single brand, multi-national suppliers in existence at the time. We offered then, as we do now, an extensive range of hydraulic equipment. Stocked product lines range from simple hand or gear pumps, geroler motors, manual control valves, through to custom cartridge manifolds and load sensing equipment with electroproportional and servo valving. Product is sourced from around the world through selected well-known, quality companies. Dedicated industrial hydraulic project engineer.

7 in a nutshell HYTECH is a 100% New Zealand owned and operated company. Hytech was established in 2002 to fulfil a growing industry requirement for timely, small run, CNC milled aluminium and steel components. Hytech s primary market is the hydraulic manifold industry. Hytech manufactures and stocks a full line of standard hydraulic manifolds. With the aid of in-house designers, custom aluminium and steel manifolds are also designed and produced. Custom manifolds offer multiple function, layout, port and cavity options, to suit your specific requirements.

8 Assembly Centres Purpose built centres located in both Auckland and Christchurch branches Test bench facilities for hydraulic and electric motors Gearbox repair service Hydraulic motor and ram repair service Workshop services include: Full machining services Boring and keyway service Taper lock bore Shafts made

9 Why choose HYTRANS? Experienced staff to offer the right solution Power Transmission Solutions - give us your power transmission problems and we will provide you with the solution - right to the driven shaft Total drive system advice - Industrial - Marine - Mobile We have the total industry experience to offer the right product for the application National coverage - 9 Sales Engineers on the road, supported by qualified internal staff & product specialists Assembly centres in both Auckland & Christchurch. We can deliver to most parts of the country Overnight Hydraulic test bench & electric test facilities Large stock holding and 24/7 technical sales and service backup Dedicated service division

10 Hyspecs Transmissions Ltd PRODUCT SHEETS

11 Planetary drives Hydraulic Input Brake Connection Flange Electric Input SAE Input Reduction Kit Output Free Input Worm Input

12 Planetary drives CPC PC MC Comer planetary drives are a compact modular design, fully reversible, final drive system, designed specifically for use with hydraulic and electric motors Flexible range of ratio's combinations & mounting configurations - foot, flange, shrink disc Free input and worm box mounts with spindle and wheel mounts available on indent. Ratios from 3.55:1 & stacking to five stages MS FS

13 Gearboxes: Comer Industries Full range up to Nm Mounting configurations: Inline Right angle Shaft mount Foot mount Flange mount Hydraulic input Electric input Free input shaft Splined input shaft Worm box input Special harsh environment coatings and protection

14 CAD Drawings CAD drawings can be created and printed as required.

15 Electric motors Hengshui 3-phase electric motors ranging from 0.12 to 315 kw 4-pole (approx 1440 rpm) with 2,6, and 8 pole available options Foot and Flange mounts Motors exceed requirements of AS/NZ 1359:2004 Many different motor accessories and options available; Brake, Vector, Servo and Stainless motors Variable speed drives Soft starters Access to other brands to maintain plant standards

16 Hydraulic motors Low speed, high torque Poclain radial piston motors and geroler/gerotor Char- Lynn motors High speed, low torque Eaton piston motors and gear motors by Galtech Brake options available on all motors

17 PGR/PGW Wheel Output Suitable for driving rubber tired or tracked self-propelled vehicles Single or 2 stage reduction model with transmission torques up to Nm Integrated parking brake

18 PG PR Slew & Yaw Drives

19 Reduction Boxes - Motovario Variators Fractional H.P. and smaller power reduction boxes

20 Hydraulic Input Worm Box Hollow or male output shaft Input designed to fit standard SAE motors

21 Rossi Gearboxes Shaft Mount 90 Degree Inline foot mount

22 Brakes Ausco & Fairfield Brakes Comer Failsafe Brake Caliper Brake

23 Clutches Electromagnetic Manual Hydraulic Pneumatic Cone Clutches

24 Specialist Segmented Sprockets Steel or plastic

25 Shaft Couplings (Taper Lock) From 72 Nm 7200 Nm (max)

26 Tyre Couplings Up to a maximum torque of Nm Max Dynamic tyre couplings

27 Chain & Rigid Couplings Chain Coupling - up to Nm and 140 mm maximum bore size Parallel-keyed rigid coupling (single or double split)

28 Gear and Spider Couplings

29 Taper Lock Pulleys, Bushes & Vee Belts Imperial bore sizes 3/8 5 Metric bore sizes 9mm 125mm Pulleys in SP2, SPA, SPB, SPC sections with larger on request Weld in hubs up to size 5050 Classical sections Z, A, B, C, D Wedge sections SPZ, SPA, SPB, SPC Raw edge XPZ, XPA, XPB, XPC Variable speed belts Joinable vee belting

30 Shaft Locking Bushes Flanged up to 130 mm bore Non-flanged up to 250 mm bore

31 Synchronous Drives Trapezoidal pitches XL, L, H, XH H.T.D 3M, 5M, 8M, 14M Linear HTD 8M, HTD 14M Poly chain GT2 8mm, 14mm Metric T2.5, T5, T10 Double sided T5 & T10, AT5 & AT10 Custom made pulleys on request

32 White PU Belting White polyurethane belting Numerous belt section options available Numerous profile options available

33 Transmission Chain & Sprockets BSS, ASA, Double pitch Sprockets: Full range Simplex, Duplex Triplex plus specials on request Lubricators

34 Conveyor & Mill Chains Conveyor chains (including special attachments) Agricultural chain & sprockets Mill chain wide and narrow series

35 Troughing Rollers / Idlers

36 Conveyor Components or Complete Systems

37 Modular Plastic Belting Options including; flush top, raised top, perforated top and low back pressure (side flexing and straight running) Side flexing and straight running table top chain Many options of tracking guides

38 Table Top Chain & Profiles

39 Emmegi Oil Coolers Air/oil and sea/fresh water/oil coolers Oil flow to 280 l/min Offline coolers with own electric motor and pump Bypass check valves for overpressure protection 12/24 VDC, single and 3-phase AC electric motors IP 65 rating available

Crankshaft Design Radial Piston Hydraulic Motors & Gearboxes

Crankshaft Design Radial Piston Hydraulic Motors & Gearboxes History SAI was founded in 1964 when the Pecorari family could not find a reliable low speed, high torque motor for their farm equipment. Frustrated