SERIES 85 RF, MICROWAVE AND DATALINK CONTACTS

Transcription

1 SERIES 5 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-999, Series SuperNine, Series 0 Mighty Mouse, and Series 9 Micro-Crimp connectors APRIL 06

2 High Speed High Reliability High Availability No more long lead times Glenair high-performance RF, microwave and datalink contacts are in stock and ready to ship Glenair s growing portfolio of high-speed solutions now includes a wide selection of RF, microwave and datalink contacts. Compatible with MIL-DTL-999 connectors, these contacts also fit Glenair Series 0 Mighty Mouse, Series 9 Micro-Crimp and Series SuperNine connectors. Designed in accordance with SAE AS909 requirements, these contacts are suitable for aerospace and defense equipment subjected to high-vibration and temperature extremes. 50 and 5 ohm coax contacts Spring-loaded microwave contacts Twinax contacts Quadrax contacts El Ochito octaxial contacts CUSTOM PACKAGING OUR SPECIALTY Quadrax contacts installed in a HiPer-D connector El Ochito 0GBase-T Ethernet contacts installed in a custom Micro-Crimp connector Glenair s complete high-speed solution also includes a wide variety of standard and modified connectors, cordsets, fiber optic and opto-electronic technologies. Our rapid-response engineering and manufacturing capabilities allow us to quickly design and build customized interconnects and systems. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts Custom right angle board mount twinax connector

3 for MIL-DTL-999, SuperNine, Mighty Mouse, and Micro-Crimp Connectors Table of Contents Product Selection Guide... AS909 Coaxial Contacts Low-Loss Matched-Impedance Contacts Size # AS909 Coaxial Contacts 5-006, 5-00, M909/59, M909/ Size # AS909 Coaxial Contacts 5-00, -00, -00, -00, -005 M909/, /, /0, /0... Size #6 AS909 Coaxial Contacts 5-00, 5-009, 5-00, M909/6, /, /... Selection Guide...9 Size # 50 Ohm Matched-Impedance Contacts 5-00, 5-0, 5-0, Size # 50 Ohm Matched-Impedance Contacts 5-05, -06, -0, -0, -09, Size # 5 Ohm Matched-Impedance Contacts 5-056, 5-05, 5-0, Size # 5 Ohm Matched-Impedance Contacts 5-0, 5-0, High Performance 5 Ohm Coaxial Cable 960-0, 960-, Spring-Loaded Microwave Coaxial Contacts Twinax Contacts Quadrax Contacts Size # BMA Style Spring-Loaded GHz Contacts 5-0, Size # BMB Style Spring-Loaded GHz Contacts 5-00, Size # SMPM Style Spring-Loaded 0 GHz Contacts 5-0, 5-05, Size # AS909 Concentric Twinax Contacts 5-00, -00, M909/, /... 6 Size # 00 Ohm Concentric Twinax Contacts 5-0, Size # Concentric Twinax Contacts 5-00, Size # 00 Ohm Differential Twinax Contacts 5-0, 5-0, 5-0, Size # 00 Ohm Differential Ultra-Twinax Contacts 5-05, Size # 00 Ohm and 50 Ohm Quadrax Contacts 5-00, 5-00, 5-0, Aerospace-Grade Star Quad Cable... 9 El Ochito Octaxial Contacts for Gigabit and 0G Ethernet Size # El Ochito Contacts 5-00, 5-00, 5-009, 5-00, 5-06, Aerospace-Grade Category 6a Ethernet Cable 96-00, Pre-Wired El Ochito Contacts El Ochito Test Adapters and Jumpers 5-00, 59-, -, -, Part Number Index Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 HIgh-Speed Contacts

4 for MIL-DTL-999, SuperNine, Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide AS909 RF Contacts 50 Ohm Low-Loss Matched-Impedance Coaxial Contacts Size # AS909 Coaxial Contacts for RG dc 00 MHz Size # coaxial contacts accept RG-0 cable. Maximum frequency is 00 MHz. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-999 Series I, III, and IV, Series SuperNine, and Series 0 Mighty Mouse connectors with size cavities. AS909 qualified. Size # AS909 Coaxial Contacts... dc GHz Size # coaxial contacts accept RG-, RG-9, RG-0 and RG-6 cable. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-999 Series I, II, III, and IV, Series SuperNine, Series 9 MicroCrimp and Series 0 Mighty Mouse connectors with size cavities. AS909 qualified. Size #6 AS909 Coaxial Contacts... dc 500 MHz Size #6 coaxial contacts accept RG-, RG-, RG-9 and RG-6 cable. Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-999 Series I, II, III, and IV, Series SuperNine, Series 9 MicroCrimp and Series 0 Mighty Mouse connectors with size 6 cavities. AS909 qualified. Size # 50 Ohm Matched-Impedance Contacts...0 dc 6 GHz High-frequency matched-impedance # contacts accept RG-6 single and double shielded cable along with M/0-000 cable. Compatible with MIL-DTL-999, Series SuperNine and Series 0 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 50 ohm impedance. Size # 50 Ohm Matched-Impedance Contacts... dc GHz High-frequency matched-impedance contacts accept RG-, RG-6, and RG-05 flex cable. Compatible with MIL-DTL-999 Series I, II, III and IV, Series SuperNine, Series 9 MicroCrimp and Series 0 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 50 ohm impedance. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

5 for MIL-DTL-999, SuperNine, Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide 5 Ohm Low-Loss Matched-Impedance Coaxial Contacts Size # 5 Ohm Matched-Impedance Contacts... dc GHz High-frequency 5 ohm # contacts accept RG-9 cable along with high performance RS0, SMPTE 9M, SMPTE M and other video cables. Compatible with MIL-DTL-999 Series I, III, and IV, Series SuperNine and Series 0 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. Size # 5 Ohm Matched-Impedance Contacts...6 dc GHz 5 ohm size # matched-impedance contacts accept high performance RS0, SMPTE 9M and other video cables. Compatible with MIL-DTL-999 Series I, II, III, and IV, Series SuperNine, Series 9 MicroCrimp and Series 0 Mighty Mouse connectors. Crimp termination. Snap-in, rear-release. 5 Ohm High-Performance Video Cable... Cable is specially designed and manufactured for reliable performance in aircraft systems and other harsh environments involving high temperature, EMI and corrosive materials. 50 Ohm Spring-Loaded Microwave Coaxial Contacts Size # Spring-Loaded BMA Coaxial Contacts...0 dc GHz These size contacts conform to the MIL-STD- BMA interface standard. These contacts accept RG-0-FLEX and RG-05-FLEX cables along with other low loss flexible cables. Compatible with MIL-DTL-999 Series I, III, and IV, Series SuperNine and Series 0 Mighty Mouse connectors. Solder termination. Size # Spring-Loaded BMB Coaxial Contacts... dc GHz These size contacts conform to the MIL-STD- BMB interface standard. These contacts accept RG-0-FLEX and RG-05-FLEX cables along with other low loss flexible cables. Compatible with MIL-DTL-999 Series I, III, and IV, Series SuperNine and Series 0 Mighty Mouse connectors. Solder termination. Size Spring-Loaded SMPM Coaxial Contacts... dc 0 GHz These size contacts accept RG-05-FLEX cable and are compatible with MIL- DTL-999, Series SuperNine, Series 9 MicroCrimp and Series 0 Mighty Mouse connectors. Solder termination.. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

6 for MIL-DTL-999, SuperNine, Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide Twinax Contacts Size # Ohm Concentric Twinax Contacts...6 M909 concentric twinax contacts accommodate ohm shielded twisted pair cable. These size contacts meet the requirements of M909/ and /. Compatible with MIL-DTL-999, Series SuperNine and Series 0 Mighty Mouse connectors. Use with M/ databus cable, 0 MHz maximum operating frequency. Size # 00 Ohm Concentric Twinax Contacts... These concentric twinax contacts accommodate AWG 00 ohm shielded twisted pair data cable. Compatible with MIL-DTL-999 Series I, III, and IV, Series SuperNine and Series 0 Mighty Mouse connectors. Accepts TE/Raychem 00A00 and Gore GSC cables. Size # Ohm Concentric Twinax Contacts...0 M909 concentric twinax contacts accommodate ohm shielded twisted pair data cable. Typically used for MIL-STD-55 databus applications, these size contacts meet the requirements of JN0, DSCC 000 and DSCC 000. Compatible with MIL-DTL-999 Series I, III, and IV connectors. Snap-in, rear release, crimp termination. Size # Differential Twinax Contacts... Rated for dc GHz frequency, these contacts accept 6, 5, and 00 ohm shielded twisted pair cable including with M/ databus cable. Compatible with Series 0 Mighty Mouse connectors and Glenair - MIL-DTL-999-type Series III connectors with keyed # cavities. Not for use in standard MIL-DTL-999 connectors with unkeyed inserts. Size # Differential Ultra-Twinax Contacts...5 These 00 Ohm differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Use with highspeed #0 AWG twisted pair cable. These contacts are compatible with Glenair Series 0 Mighty Mouse connectors with size # cavities. Size # 00 ohm contacts feature DC 0 GHz frequency range. Solder termination. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

7 for MIL-DTL-999, SuperNine, Mighty Mouse, and Micro-Crimp Connectors Product Selection Guide Quadrax Contacts El Ochito Octaxial Contacts Quadrax Contacts ohm Ethernet and 50 ohm Fibre Channel differential quadrax contacts are compatible with standard Series 0 Mighty Mouse connectors and Glenair - MIL-DTL-999-type Series III connectors with keyed # inserts. These contacts accept aerospace grade quad cable. Not for use with standard MIL-DTL-999 connectors with unkeyed inserts. Quad Cable...9 Aerospace-grade four-conductor 00 ohm quad cable is available in wire sizes, and 6. These high-performance cables feature inner and outer shields for excellent EMI protection. High-temperature fluoropolymer insulation provides up to 50 C or 00 C temperature rating. El Ochito Octaxial Contacts...0 El Ochito, the Little, brings 000BASE-T and 0GBASE-T capability to a size # snap-in contact with eight inner contacts. Data pair isolation technology reduces crosstalk between pairs. This contact accepts flight-grade Cat6a cable with #6AWG conductors. Not for use with standard MIL-DTL-999 connectors with unkeyed inserts. Aerospace Cat6a Cable...6 Lightweight, shielded flight-grade Ethernet cable is available in two styles: S/UTP (unshielded pairs) and S/FTP (foil-wrapped pairs). These 6 AWG cables are 00 C rated and meet ANSI/TIA 56-C. Category 6a requirements. Pre-Wired El Ochito Contacts... Pre-wired El Ochito assemblies are 00% tested and ready for use. These assemblies are available with three termination options: single-ended, El Ochito contacts on both ends, or with an RJ5 plug on one end. El Ochito Test Adapters and Jumpers...9 Prevent damage to expensive cables with El Ochito test adapters and jumper cables. These test adapters properly align mating test contacts without the added expense and time-consuming labor of mating connectors. Jumper cables have shielded Cat6a RJ5 plugs. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 5

8 AS909 Coaxial Contacts Size # AS909 Coaxial Contacts Pin Contact These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse, Series SuperNine, and MIL-DTL-999 Series I, III and IV connectors with size # cavities. Crimp termination. SAE AS909 qualified. Shipped unassembled with assembly instruction sheet, expander tool and push-rod tool. Socket Contact Technical Data Specifications Construction Operating temperature: -65 C to +00 C Inner contact, body, outer sleeve: copper Dielectric withstanding voltage: 00 Vac alloy, gold over nickel underplate per rms at sea level, 50 Vac at 50,000 feet AS909 Type D Current rating: ampere Insulator: fluoroplastic Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: MIL-DTL-999 Max operating frequency: 00 MHz Size # AS909 Coaxial Contacts RG Cable Size Pin Contact M999 Series I, III, IV Series 0 Socket Contact M999 Series I, III, IV Series 0 Crimp Tools Inner Contact Shield Crimp Sleeve Crimper Positioner Crimper Die Set Removal Tool RG (M909/60-6) (M909/59-66) (M50/-0) (M50/-) (M50/5-05) 59-0 (M969/-06) Pin Contact Socket Contact Ø.65 (.9) MIN.56 (.).0 (0.9) Ø./.9 (5.5/5.56) Ø.65 (.9) MIN.56 (.).65 (5.).0 (0.9) Ø.6/. (.0/6.) Ø.6/. (.0/.90) Ø.6/. (.0/6.) Ø.6/. (.0/.90) Ø.06 (.69) MIN SHIELD.5 CRIMP Pin Contact (.) SLEEVE Ø.06 (.69) MIN SHIELD CRIMP Socket SLEEVEContact ø.055 ±.000 (0.90 ± 0.05) # Sealing Boot Optional sealing boot fits RG0 cable. Slide boot onto cable before terminating contact. Fluorosilicone grommet, Ultem follower. Inner Contact Dimensions.0 (0.69) MIN.055 (0.90) AS909 Color Stripes Part AS909 Color Bands Number Part No. st nd rd M909/59-66 ORANGE BLUE BLUE M909/60-6 ORANGE BLUE VIOLET.50 (.9).95 (5.0).6 (.).65/.55 (.9/.9) MIN Cable Range (In.) Part Number Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

9 AS909 Coaxial Contacts Size # AS909 Coaxial Contacts These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse, Series SuperNine, Series 9 Micro-Crimp and MIL-DTL-999 connectors with size # cavities. Crimp termination. SAE AS909 qualified. Technical Data Specifications Construction Operating temperature: -65 C. to +00 C. Inner contact, body, outer sleeve: copper Dielectric withstanding voltage: 000 Vac alloy, gold over nickel underplate per rms at sea level, 50 Vac at 50,000 feet AS909 Type D Current rating: ampere Socket contact hood: stainless steel Durability: 500 mating cycles Insulator: fluoroplastic 50 ohm nominal impedance* VSWR:. max., 500 MHz to GHz* Insertion loss: 0.0 db GHz* * Applies to 5-00 and only RG Cable Size Freq. Pin Contact M999 I-IV Ser. 9, 0 RG 00 MHZ (M909/-) RG9 00 MHZ (M909/-) RG0 00 MHz (M909/-09) 00 MHz (M909/-) RG6 GHz (M909/0-55) Size # AS909 Coaxial Contacts Socket Contact Crimp Tools Insertion/ M999 M999 Ser. II Inner Contact Shield Crimp Sleeve Removal Series I, III, IV Series 9, 0 Crimper Positioner Crimper Die Set Tool (M909/5-6) (M909/5-6) (M909/5-) (M909/5-6) (M909/0-559) (M909/-0) (M909/-0) (M909/-0) (M909/-0) (M50/-0) (M50/-0) (M50/-0) (M50/-0) (N/A) 09- (MH99) 09-5 (M50/-) 09-5 (M50/-) 09-5 (M50/-) 09-5 (M50/-) (K) 09- (M50/-0) 09- (M50/-0) 09- (M50/-0) 09- (M50/-0) (M50/-0) 09- (M50/-0) 09- (M50/-0) 09- (M50/-0) 09-0 (M50/5-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) Pin Contact 5-00, 5-00 Socket Contact 5-00 Cable Entry./.9 (.6/.55).0 (0.9).50 (.5).00/.95 (.6/.9).095/.09 (./.6)./.9 (.6/.55).560 (.).9/.9 (./.09).0 (0.9) Ø.00 (0.).6 (.09) 5-00, -00, -00 RG, RG9, RG6.090 (.9) MIN RG0.0 (.) MIN 5-00, -005 RG6.066 (.6) MIN./.9 (.6/.55) Socket Contact 5-00, (0.9).96 (.6).66/.60 (5.90/5.5).6 (.09) Ø.00 (0.) AS909 Color Stripes AS909 Color Bands Part No. st nd rd M909/-0 RED BROWN BLACK M909/-0 YELLOW BLACK RED M909/- RED BROWN BROWN M909/-09 YELLOW BLACK WHITE M909/5-6 YELLOW BROWN BLUE M909/5- YELLOW BROWN VIOLET M909/0-55 GREEN GREEN GRAY M909/0-559 GREEN GREEN WHITE Inner Contact Crimp Barrel.0 (0.56) MIN.0 (.) MIN 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts Rev

10 AS909 Coaxial Contacts Size #6 AS909 Coaxial Contacts These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse, Series SuperNine, Series 9 Micro-Crimp and MIL-DTL-999 connectors with size #6 cavities. Crimp termination. SAE AS909 qualified. Technical Data Specifications Construction Operating temperature: -65 C. to +00 C. Inner contact, body, outer sleeve: copper Dielectric withstanding voltage: 00 Vac alloy, gold over nickel underplate per rms at sea level, 50 Vac at 50,000 feet AS909 Type D Current rating: ampere Socket contact hood: stainless steel Durability: 500 mating cycles Insulator: fluoroplastic VSWR: MHz RG Cable Size Max. Freq. Pin Contact M999 I-IV Ser. 9, 0 Size #6 AS909 Coaxial Contacts M999 Series I, III, IV Socket Contact M999 Ser. II Series 9, 0 Inner Contact Crimp Tools Shield Crimp Sleeve Crimper Positioner Crimper Die Set Insertion/ Removal Tool RG RG9 RG MHZ (M909/6-) (M909/-) (M909/-) (M50/-0) 09-5 (M50/-5) 09- (M50/-0) 09-6 (M50/-0) 09- (M969/-0) RG MHZ (M909/6-5) (M909/-9) (M909/-) Pin Contact (.5).00/.95 (.6/.9) Socket Contact (.).9/.9 (./.09).0/. (.0/.).0 (0.9).065/.065 (.6/.56).0/. (.0/.).0 (0.9). (.) Socket Contact (.6).66/.60 (5.90/5.5) Inner Contact Crimp Barrel.0 (0.5) MIN.055/.05 (0.9/0.).0 (.) MIN AS909 Color Stripes AS909 Part No. Color Bands st nd rd M909/6- YELLOW RED YELLOW M909/6-5 YELLOW RED GREEN.0/. (.0/.).0 (0.9). (.) Cable Entry RG, RG9, RG6.06 (.0) MIN RG.055 (.6) MIN M909/- YELLOW RED GRAY M909/-9 YELLOW RED WHITE M909/- YELLOW ORANGE RED M909/- YELLOW ORANGE ORANGE 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

11 Low-Loss Matched-Impedance Coaxial Contacts Selection Guide 50 Ohm Matched-Impedance Contacts These 50 ohm high frequency contacts provide low insertion loss and improved VSWR compared to AS909 coaxial contacts. These snap-in, rear-release contacts are compatible with MIL-DTL-999 connectors and Glenair Series 9 Micro-Crimp, Series 0 Mighty Mouse and Series SuperNine connectors. Cable Size Max. Freq. 50 Ohm Matched-Impedance Coaxial Contacts Socket Contact Pin Contact M999 I-IV M999 Ser. 9, 0 Series I, III, IV Series 0 M999 Series II Series 9, 0 Page RG GHz RG6 GHz 5-0-0F F (N/A) 0 RG6 GHz RG6DS 6 GHZ 5-0-0F F (N/A) 0 RG6DS GHz RG05-FLEX GHZ Ohm Matched-Impedance Contacts M/ GHz 5-0F 5-0F (N/A) 0 These 5 ohm high frequency contacts for up to GHz fre quency range accept aerospace grade digital video cable. These snap-in, rear-release contacts are compatible with MIL- DTL-999 connectors, Glenair Series 9 Micro-Crimp, Series 0 Mighty Mouse and Series SuperNine connectors. Cable Size Max. Freq. 5 Ohm Matched-Impedance Coaxial Contacts Socket Contact Pin Contact M999 I-IV M999 Ser. 9, 0 Series I, III, IV Series 0 M999 Series II Series 9, 0 Page RG9 GHz F F (N/A) RG9 GHz PIC V6, V56, V66 PIC V6, V56, V66 GHz F F (N/A) GHz PIC V09 GHz 5-0-0F 5-0-0F (N/A) LMR-0-5 GHz 5-0-0F 5-0-0F (N/A) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 9

12 Low-Loss Matched-Impedance Coaxial Contacts Size # 50 Ohm Matched-Impedance Coaxial Contacts Pin Contact Coax contacts fit Glenair Series 0 Mighty Mouse connectors and MIL-DTL-999 Series I, III and IV connectors with size contact cavities. 50 ohm nominal impedance. DC 6 GHz frequency range. Inner contact is solder type, shield termination is crimp type. Supplied as unassembled kit with contact body, center contact, front and rear dielectric, retainer, clamp nut, crimp sleeve, sealing boot and instruction sheet. Contacts are snap-in, rear-release. DC 6 GHz frequency range 50 ohm nominal impedance 50 microinches gold over nickel plating Crimp termination VSWR.5: 6 GHz AS909 design, construction and performance Socket Contact RG Cable RG6 (M/-RG6) RG6DS (M/5-0000) LLSB-00 (M/0-000) Size # 50 Ohm Matched-Impedance Coaxial Contacts Size Max. Freq. Pin Contact Socket Contact "A" Hex In. mm. GHz 5-0-0F F..5 6 GHZ 5-0-0F F..5.5 GHz 5-0F 5-0F. 5. Technical Data Specifications Construction Connector Compatibility Operating temperature: -65 C. to +00 C. VSWR:.5: 6 GHz 50 ohm nominal impedance Dielectric withstanding voltage: 00 Vac rms at sea level, 50 Vac at 50,000 feet Current rating: ampere Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact, body, retainer, clamp nut: copper alloy, 50 microinches gold over nickel plating Front and rear dielectric: fluoroplastic Sealing Boot: fluorosilicone rubber, glassfilled PEI MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Pin Contact 5-0, 5-0 CABLE (REF) CRIMP SLEEVE CLAMP NUT FRONT DIELECTRIC BODY.56 (.).5 (.) ±.00 (0.0) Ø.9 (5.56). (5.5) Ø.6 (.0). (.95) RETAINER REAR DIELECTRIC CENTER CONTACT A HEX CRIMP.0 (0.).09 (0.) 0 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

13 Low-Loss Matched-Impedance Coaxial Contacts Size # 50 Ohm Matched-Impedance Coaxial Contacts Socket Contact 5-00, 5-0 CRIMP SLEEVE CABLE (REF) CLAMP NUT FRONT DIELECTRIC BODY.56 (.).65 (5.) ±.006 (0.5) Ø.055 ±.00 (0.90 ± 0.0) Ø.6 (.0). (.95) RETAINER REAR DIELECTRIC CENTER CONTACT A HEX CRIMP.0 (0.).09 (0.) Contact Part Number Crimp Tools, Removal Tool, Assembly Instruction Sheet Crimp Tools Inner Contact Shield Crimp Sleeve Removal Tool Crimper Positioner Crimper Hex Die (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (Solder termination) (M50/5-0) 09-0 (M50/5-0) (M50/5-05) (M50/5-05) (M969/-) (M969/-) (M969/-) (M969/-) Assembly Instruction Sheet AI50 AI50 AI500 AI500 Crimp Tools Tool terminates cable shield to contact ferrule. Use with M50/5 die sets Hex Dies Hex die for crimping ferrule to cable braid. Hardened steel, black oxide finish. Reference Coax Cable Data LLSB-00 RG6 RG6DS Manufacturer Times Microwave (mil spec) (mil spec) Military Part Number M/0-000 M--RG6 M/ Impedance 50 ± 50 ± 50 ± Operating Frequency (Max).5 GHz GHz. GHz Temperature Range -0 to +5 C -55 to +00 C -55 to +00 C Continuous Working Voltage 50 V rms, max. 900 V rms, max. 900 V rms, max. Jacket Material LSZH* FEP FEP Jacket Diameter.95 (.95).09 (.9). (.90) *Low Smoke Zero Halogen cross-linked polyolefin 09-0 (M50/5-0) (M969/-) Removal Tool (M50/5-05) Sealing Boot Sealing boots are supplied with contacts. To order contacts less the sealing boot, remove the "F" suffix from the part number..50 (.9).95 (5.0).6 (.) Wire Dia. (in.) Wire Dia. (mm.) Part Number Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

14 Low-Loss Matched-Impedance Coaxial Contacts Size # 50 Ohm Matched-Impedance Coaxial Contacts Pin Contact Coax contacts fit Glenair Series 9 Micro-Crimp, Series 0 Mighty Mouse, and MIL-DTL-999 Series I, II, III and IV connectors with size contact cavities. 50 ohm nominal impedance. DC GHz frequency range. Contacts are snap-in, rear-release. Gold plated copper alloy, fluoroplastic insulator. DC GHz frequency range 50 ohm nominal impedance 50 microinches gold over nickel plating Crimp termination AS909 performance Accepts RG-05-Flex low-loss microwave cable Socket Contact (MIL-DTL-999 Series II, Glenair Series 9 and Series 0) Socket Contact (MIL-DTL-999 Series I, III, and IV) RG Cable RG (M/9-RG) RG6 (M/-RG6) RG6DS (M/5-0000) Size 50 Ohm Matched-Impedance Coaxial Contacts Max. Freq. Pin Contact M999 Series I, III, IV Socket Contact M999 Series II Series 9, 0 GHz GHz GHz RG05-FLEX GHZ Technical Data Specifications Construction Connector Compatibility Operating temperature: -650C. to +000C. VSWR:.: GHz Nominal impedance: 50 ohms Insertion loss: 0.0 db maximum at GHz Dielectric withstanding voltage: 000 Vac rms at sea level Current rating: ampere Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact, body, crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic MIL-DTL-999 Series I, II, III and IV Glenair Series SuperNine Glenair Series 9 Micro-Crimp Glenair Series 0 Mighty Mouse Socket Contact 5-05 Socket Contact 5-0.9/.9 (./.09).560 (.).5/. (./.6).9/.9 (./.09).560 (.).5/. (./.6).6/.5 (.09/.0) Ø./.9 (.6/.55).6/.5 (.09/.0) Ø./.9 (.6/.55) Ø.005/.095 (0.5/0.95).0/.09 (0./0.) CRIMP FERRULE Ø.005/.095 (0.5/0.95).0/.09 (0./0.) SOLDER HOLE 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

15 Low-Loss Matched-Impedance Coaxial Contacts Size # 50 Ohm Matched-Impedance Coaxial Contacts Ø.095/.09 (./.6).00/.95 (.6/.9) Pin Contact (.).5/. (./.6) SKT TO MATE WITH.005/.095 (0.5/0.95) PIN.0/.09 (0./0.)./.9 (.6/.55) CRIMP FERRULE.00/.95 (.6/.9) Ø.095/.09 (./.6) SKT TO MATE WITH.005/.095 (0.5/0.95) PIN Pin Contact (.).5/. (./.6)./.9 (.6/.55) SOLDER.0/.09 HOLE (0./0.) Socket Contact 5-09 Socket Contact (.6).66/.60 (5.90/5.5) Ø.5/. (./.6).96 (.6).66/.60 (5.90/5.5) Ø.5/. (./.6) Ø.6/.5 (.09/.0) Ø./.9 (.6/.55) Ø.6/.5 (.09/.0) Ø./.9 (.6/.55) Ø.005/.095 (0.5/0.95) CRIMP.0/.09 FERRULE (0./0.) Ø.005/.095 (0.5/0.95).0/.09 (0./0.) SOLDER HOLE Contact Part Number Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Crimp Tools Installation/ Inner Contact Shield Crimp Sleeve Removal Crimper Positioner Crimper Hex Die Tool 09- (MH99) 09- (MH99) (Solder termination) (Solder termination) (M50/-0) (Solder termination) (K) (K) (Solder termination) (Solder termination) 59- (K5) (Solder termination) (Solder termination) (Solder termination) 09-9 (Solder termination) 09-0 (M50/5-0) 09-0 (M50/5-0) (Solder termination) (Solder termination) 09-0 (M50/5-0) (Solder termination) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) Assembly Instruction Sheet AI500 AI500 AI500 AI500 AI50 AI50 Inner Contact Crimp Tools 09- (MH99) (M50/-0) Shield Crimp Tool (K) 59- (K5) (M50/5-0) Installation/Removal Tool 09- (M969/-0) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

16 Low-Loss Matched-Impedance Coaxial Contacts Size # 5 Ohm Matched-Impedance Coaxial Contacts Size coax contacts fit aerospace-grade digital video cable. 5 ohm nominal impedance. 0- GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact, outer ferrule and sealing boot. These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse connectors and MIL-DTL-999 Series I, III and IV connectors with size contact cavities. Gold-plated copper alloy, fluoroplastic insulators. Pin Contact Socket Contact Size 5 Ohm Matched-Impedance Coaxial Contacts A Hex Crimp Cable Pin Contact Socket Contact In. mm. V56, V66, V6 (PIC Wire and Cable) RG9 (M/9-RG9) V09 (PIC Wire and Cable) LMR-0-5 (Times Microwave) F F F F F 5-0-0F F 5-0-0F. 5. Technical Data Specifications Construction Connector Compatibility Operating temperature: -650C. to +000C. Dielectric withstanding voltage: 500 Vac rms at sea level Current rating: ampere VSWR:.5: GHz 5 ohm nominal impedance Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact, body, retainer, clamp nut, ferrule: copper alloy, 50 microinches gold over nickel plating Front and rear insulator: fluoropolymer Sealing boot: fluorosilicone rubber, glassfilled PEI MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Pin Contact CRIMP FERRULE CABLE (REF) FRONT INSULATOR BODY.56 (.).5 (.) ±.00 (0.0).9 (5.56). (5.5) Ø.6 (.0). (.95) REAR INSULATOR CENTER CONTACT Socket Contact 5-05 A HEX CRIMP.0 (0.).09 (0.) CRIMP FERRULE CABLE (REF) FRONT INSULATOR BODY.56 (.).65 (5.) ±.006 (0.5) Ø.00 ±.0005 (0.6 ± 0.0) Ø.6 (.0). (.95) REAR INSULATOR CENTER CONTACT A HEX CRIMP.0 (0.).09 (0.) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

17 Low-Loss Matched-Impedance Coaxial Contacts Size # 5 Ohm Matched-Impedance Coaxial Contacts Pin Contact 5-0 CRIMP FERRULE RETAINER FRONT INSULATOR BODY.56 (.).5 (.) ±.00 (0.0).9 (5.56). (5.5) Ø.6 (.0). (.95) CABLE (REF) REAR INSULATOR CENTER CONTACT. (5.) HEX CRIMP.6 (.0). (6.).0 (0.).09 (0.) Socket Contact 5-0 RETAINER CRIMP FERRULE FRONT INSULATOR BODY.56 (.).65 (5.) ±.006 (0.5) Ø.00 ±.0005 (0.6 ± 0.0) Ø.6 (.0). (.95) CABLE (REF) REAR INSULATOR CENTER CONTACT. (5.) HEX CRIMP.6 (.0). (6.).0 (0.).09 (0.) MATES WITH.9/. (5.56/5.5) PIN Contact Part Number F F F Crimp Tools, Removal Tool, Assembly Instruction Sheet Crimp Tools Removal Inner Contact Shield Crimp Sleeve Tool Crimper Positioner Crimper Hex Die (M50/-0) (M50/-0) (M50/-0) 09-0 (M50/-) 09-0 (M50/-) 09-0 (M50/-) (M50/5-5) 09-0 (M50/5-0) 59-0 (M50/5-5) (M969/-) (M969/-) (M969/-) Assembly Instruction Sheet AI50 AI5059 AI50 Inner Contact Crimp Tools (M50/-0) 09-0 (M50/-) Shield Crimp Tool F (M50/-0) (M50/-0) (M50/-0) 09-0 (M50/-) 09-0 (M50/-) 09-0 (M50/-) (M50/5-0) 59-0 (M50/5-5) 59-0 (M50/5-5) (M969/-) (M969/-) (M969/-) AI5059 AI5060 AI Hex Die Sealing Boot Sealing boots are supplied with contacts. To order contacts less the sealing boot, remove the "F" suffix from the part number..50 (.9).95 (5.0).6 (.) Wire Dia. (in.) Wire Dia. (mm.) Part Number (M50/5-0) (M969/-) Removal Tool 59-0 (M50/5-5) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 5

18 Low-Loss Matched-Impedance Coaxial Contacts Size # 5 Ohm Matched-Impedance Coaxial Contacts 5 ohm coax contactsprovide DC GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body, center contact and outer ferrule. These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse, Series 9 Micro-Crimp and MIL- DTL-999 connectors with size contact cavities. Gold-plated copper alloy, fluoroplastic insulator. Size 5 Ohm Matched-Impedance Coaxial Contacts Socket Contact RG Cable Pin Contact M999 Series I, III, IV M999 Series II Series 9, 0 RG9 (M/9-RG9) V56, V66, V6 (PIC Wire and Cable) Technical Data Specifications Construction Connector Compatibility Operating temperature: -650C. to +000C. Dielectric withstanding voltage: 500 Vac Current rating: ampere VSWR:.5: GHz 5 ohm nominal impedance Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact, body,crimp sleeve: copper alloy, 50 microinches gold over nickel plating Insulator: fluoroplastic Hood: stainless steel, passivated MIL-DTL-999 Series I, II, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Glenair Series 9 Micro-Crimp Ø.095/.09 (./.6).00/.95 (.6/.9) Pin Contact 5-0-0, (.) SKT TO MATE WITH.005/.095 (0.5/0.95) PIN.5/. (./.6).0/.09 (0./0.)./.9 (.6/.55) CRIMP FERRULE.6/.5 (.09/.0) Socket Contact 5-0-0, (.).9/.9 (./.09).5/. (./.6) Ø./.9 (.6/.55) Ø.005/.095 (0.5/0.95).0/.09 CRIMP FERRULE (0./0.) Pin Contact , (.6).66/.60 (5.90/5.5).5/. (./.6) Ø.6/.5 (.09/.0) Ø.005/.095 (0.5/0.95).0/.09 (0./0.) Ø./.9 (.6/.55) CRIMP FERRULE 6 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

19 Low-Loss Matched-Impedance Coaxial Contacts Size # 5 Ohm Matched-Impedance Coaxial Contacts Contact Part Number Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Crimp Tools Insertion/ Inner Contact Shield Crimp Sleeve Removal Crimper Positioner Crimper Positioner Tool (MH99) (MH99) (MH99) (MH99) (M50/-0) (M50/-0) (K) (K) (K) (K) (M50/-) (M50/-) 09- (M50/-0) (M50/-0) (M50/-0) (GP959) 09-0 (M50/5-0) 59- (GP959) 09-0 (M50/5-0) 59- (GP959) 09-0 (M50/5-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) 09- (M969/-0) Assembly Instruction Sheet AI505 AI50 AI505 AI500 AI50 AI50 Inner Contact Crimp Tools 09- (MH99) (M50/-0) (K) (M50/-) Shield Crimp Tool 09- (M50/-0) 59- (GP959) (M50/5-0) Installation/Removal Tool 09- (M969/-0) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

20 Low-Loss Matched-Impedance Coaxial Contacts High Performance 5 Ohm Coaxial Cable PIC Aerospace-Grade Video Cable PIC video cable is specially designed and manufactured for reliable performance in aircraft systems and other harsh environments involving high temperature, EMI and corrosive materials. Improved strength, lower attenuation and better shielding compared with M/9- RG9. Silver-plated conductor, foamed FEP dielectric, tinned copper braid, FEP or ETFE jacket. Syydrol resistant, RoHS compliant, meets FAA FAR Parts and 5, Appendix F flammability, complies with MIL-DTL-. Times Microwave LMR -0-5 Cable Times Microwave LMR -0-5 flexible lowloss coaxial cable is designed for 0 year outdoor service life. Featuring excellent flexibility and bendability, LMR-0-5 cable has a UV resistant polyethelyne jacket. PIC V66 PIC V56 LMR -0-5 FOAMED FEP DIELCTRIC Ø.06 (.) SILVER-PLATED CONDUCTOR Ø.09 (0.) FOAMED FEP DIELCTRIC Ø.06 (.) SILVER-PLATED CONDUCTOR Ø.09 (0.) POLYETHELYNE JACKET.0 (6.0) DIA. ALUMINUM TAPE.55 (.9) DIA. SOLID BARE COPPER.0 (0.) DIA. ETFE JACKET Ø. (.0) ALUMINIZED PLASTIC FOIL TINNED COPPER BRAID Ø.0 (.) FEP JACKET Ø. (.0) TINNED COPPER BRAID Ø.0 (.59) TINNED COPPER BRAID. (.5) DIA. FOAMED POLYETHELYNE.50 (.) DIA. PIC V6 PIC V09 FOAMED FEP DIELCTRIC Ø.06 (.) SILVER-PLATED CONDUCTOR Ø.09 (0.) TINNED COPPER BRAID SILVER-PLATED STRANDED COPPER CONDUCTOR #0 AWG ETFE JACKET Ø.5 (.) SILVER PLATED HELICAL COPPER STRIP TINNED COPPER BRAID Ø.0 (.) TTEFZEL JACKET Ø. (5.6) ALUMINIZED WRAPPER FOAMED FEP Glenair Part No Manufacturer Part No. V56 V66 V6 V09 LMR-0-5 Manufacturer PIC PIC PIC PIC Times Microwave Impedance (ohms) Shielding Effectiveness (db) >90 Video Application RS0 RS0 SMPTE 9M SMPTE M Various First Shield TC Braid TC Braid TC Braid TC Braid TC Braid Second Shield None Aluminized film, 00% coverage Silver plated helical copper strip, 00% Aluminized film, 00% coverage Aluminized film, 00% coverage Temperature Rating -65 to +65 C -65 to +65 C -65 to +65 C -55 to +50 C -0 to +5 C Minimum Bend Radius 0.6 in. (5mm.) 0.6 in. (5mm.) 0.65 in. (6.5mm.). in. (.9mm.).5 in. (9.mm.) Weight (lbs/00 ft.) Capacitance (pf/ft) Velocity of Propagation % Time Delay ns/ft..... Max. Attenuation Freq. db/00 ft Freq. db/00 ft Freq. db/00 ft Freq. db/00 ft Freq. db/00 ft MHz 0.55 MHz 0.5 MHz 0.5 MHz MHz.6 0 MHz. 0 MHz. 0 MHz.6 0 MHz MHz MHz MHz MHz MHz MHz. 00 MHz. 00 MHz. 00 MHz MHz 6..5 GHz 9..5 GHz.6.5 GHz..5 GHz.0.5 GHz.6.0 GHz 0.9 GHz. GHz 6. GHz.0 GHz GHz. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

21 Spring-Loaded Microwave Frequency Coaxial Contacts Product Overview and Selection Guide Spring-Loaded Coaxial Contacts for up to 0 GHz Performance Spring-loaded coaxial contacts maintain consistent mating geometry for optimum preformance at extremely high frequencies in challenging environmental conditions. These interfaces are adapted from the field-proven and widely-deployed blind-mate contact interfaces of MIL- STD-. Suitable for satellite communications and radar equipment, these contacts are made to the highest standards for mission-critical applications. Spring-Loaded BMB Contact Size BMA Spring-Loaded Microwave Contacts... Page 0 Size 50 ohm microwave BMA coaxial contacts provide mode-free operation from DC to GHz. BMA socket contact features a stainless steel spring mechanism for consistent contact engagement, and a gold-plated annular interface spring for continuous outer conductor electrical contact and RFI suppression. Interface conforms to MIL-STD- figure. Solder termination. Supplied with cable sealing boot. Size BMB Spring-Loaded Microwave Contacts... Page 50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-999 connectors with size # contact cavities. Maximum operating frequency GHz. Spring-loaded BMB pin contact assures full mating under a variety of tolerance conditions. Interface conforms to MIL-STD- figure. Size SMPM Spring-Loaded Microwave Contacts... Page 50 ohm high frequency size # coaxial contacts fit Glenair Series 0 Mighty Mouse connectors, Glenair Series 9 Micro-Crimp connectors and MIL-DTL-999 connectors. Maximum operating frequency 0 GHz. 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 9

22 Spring-Loaded Microwave Frequency Coaxial Contacts Size # BMA Contacts for DC GHz Size 50 ohm microwave BMA coaxial contacts provide mode-free operation from DC to GHz. BMA socket contact features a stainless steel spring mechanism for consistent contact engagement, and a gold-plated annular interface spring for continuous outer conductor electrical contact and RFI suppression. Interface conforms to MIL-STD- figure. Solder termination. Supplied with cable sealing boot. Pin Contact Q Q DC GHz frequency range Q Q 50 ohm impedance Q Q Aerospace-grade construction Q Q BMA Interface per MIL-DTD- Q Q Low VSWR, low insertion loss Q Q Low RF leakage Accepts RG0-Flex and RG05-Flex cables Size 50 Ohm BMA Coaxial Contacts for DC GHz Cable Pin Contact Socket Contact RG-05 Flex (.06 inch dia.) Socket Contact RG-0 Flex (. inch dia.) Technical Data Specifications Construction Connector Compatibility Operating temperature: -55 C. to +5 C. Dielectric withstanding voltage: 500 Vac rms Frequency range: DC GHz VSWR:. + (.005 X Freq GHz) 50 ohm nominal impedance Insertion loss: 0.05 x (Freq in GHz) RF leakage: -(90 Freq GHz) Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact, solder sleeve: copper alloy, 50 microinches gold over nickel plating Insulators: PTFE per ASTM D-0 Pin contact body: copper alloy, 50 microinches gold over nickel plating Socket contact body: 0 stainless steel, passivated Retaining nut: 0 stainless steel, passivated Spring: stainless steel, passivated Interface spring: beryllium copper, 50 microinches gold over nickel plating Sealing Boot: fluorosilicone rubber, glassfilled PEI BMA contacts are compatible with the following connectors with size # contact cavities: MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Pin Contact 5-0 Ø. (.9).90 (9.9) Ø. (5.5).5 (.0) SOLDER SLEEVE RETAINING NUT Ø.50 (6.5) ACROSS FLAT Ø.0 (5.).0/.09 (0./0.) Ø. (6.96) 0 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

23 Spring-Loaded Microwave Frequency Coaxial Contacts Size # BMA Contacts for DC GHz Socket Contact 5-09 Ø. (.9) BMA INTERFACE PER MIL-STD- FIGURE.65 (5.).5 (.0) SOLDER SLEEVE RETAINING NUT Ø.50 (6.5) ACROSS FLAT Ø./. (./.).0/.09 (0./0.) Ø. (6.96) Cable Strip Length Removal Tool No tool is required for installing contact into connector..50 ±.00 (.9 ± 0.5) 90º PRE-TINNED CABLE BRAID.0 ±.00 (.9 ± 0.5) (M969/-) Sealing Boot Sealing boots are supplied with contacts..50 (.9).95 (5.0).6 (.) Wire Dia. (in.) Wire Dia. (mm.) Part Number Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

24 Spring-Loaded Microwave Frequency Coaxial Contacts Size # BMB Contacts for DC GHz 50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-999 Series I, III and IVconnectors with size # contact cavities. Also compatible with Glenair Series 0 Mighty Mouse and Series SuperNine connectors. Maximum operating frequency GHz. Springloaded BMB pin contact assures full mating under a variety of tolerance conditions. Interface conforms to MIL-STD- figure. Aerospace-grade construction. Solder termination. Size 50 Ohm BMB Coaxial Contacts for DC GHz Pin Contact (for use in socket connectors) Cable Pin Contact Use in Socket Connector Socket Contact Use in Pin Connector RG-0 Flex RG Socket Contact (for use in pin connectors) LL (Harbour Industries) LMR-0 (Times Microwave) RG-05 Flex Technical Data Specifications Construction Connector Compatibility Operating temperature: -55 C. to +5 C. Dielectric withstanding voltage: 000 Vac rms Frequency range: DC GHz VSWR:.0: DC GHz. Above GHz (freq GHz). 50 ohm nominal impedance Insertion loss: MHz, above GHz: 0.06 x (Freq in GHz) Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Center contact: beryllium copper alloy, 50 microinches gold over nickel plating Dielectric: PTFE per ASTM D-0 Body: beryllium copper alloy, 50 microinches gold over nickel plating Pin contact outer sleeve: 0 SST per ASTM A-5, passivated Pin contact spring: 0 or - stainless steel, passivated Sealing Boot: fluorosilicone rubber grommet, glass-filled PEI follower BMB contacts are compatible with the following connectors with size # contact cavities: MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Note: Pin contact 5-00 is installed in socket connectors. Socket contact 5-0 is installed in pin connectors. Construction Details: Pin Contact 5-00 Construction Details: Socket Contact 5-0 CABLE (REF) SOLDER HOLE REAR BODY SPRING OUTER SLEEVE FRONT BODY FRONT DIELECTRIC CENTER CONTACT SOLDER HOLE CABLE (REF) DIELECTRIC STOP FRONT DIELECTRIC CENTER CONTACT BODY DIELECTRIC STOP 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

25 Spring-Loaded Microwave Frequency Coaxial Contacts Size # BMB Contacts for DC GHz Pin Contact 5-00 Socket Contact 5-0.6(5.).95(.5).5(.0).95(.5) Ø.6/. (.0/6.) Ø.6/. (.0/6.) Ø./. (./.).0/.09 (0./0.) Ø.6/. (.0/.95).0/.09 (0./0.) Ø.6/. (.0/.95) Sealing Boot Sealing boots are supplied with contacts..50 (.9).95 (5.0).6 (.) Wire Dia. (in.) Wire Dia. (mm.) Part Number Removal Tool No tool is required for installing contact into connector (M969/-) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

26 Spring-Loaded Microwave Frequency Coaxial Contacts Size # SMPM-Type Contacts for DC 0 GHz 50 ohm high frequency size # coaxial contacts fit Glenair Series 0 Mighty Mouse connectors, Glenair Series 9 Micro-Crimp, Glenair Series SuperNine and MIL-DTL-999 connectors. Maximum operating frequency 0 GHz. Spring-loaded male contact assures consistent mating dimensions and superior microwave performance. Supplied fully assembled with cable termination instruction sheet. Male Contact (for use in socket connectors) Q Q DC 0 GHz frequency range Q Q 50 ohm impedance Q Q Aerospace-grade construction Q Q SMPM-type Interface per MIL-DTL- Q Q Spring-loaded interface Q Q Low insertion loss Q Q Solderless center contact Q Q VSWR. at 0 GHz Female Contact (for use in pin connectors) Size 50 Ohm SMPM-Type Coaxial Contacts for DC 0 GHz Cable RG-05 Flex (Times Microwave TFlex-05) Tensolite LLF-0) Female Contact (Use in Pin Connectors) Male Contact (Use in Socket Connectors) M999 Series I, III, IV M999 Series II Series 9, Technical Data Specifications Operating temperature: -55 C. to +5 C. Dielectric withstanding voltage: 500 Vac Ins. resistance: 5000 megohms min. Frequency range: DC 0 GHz VSWR:.0 + (.005 x Freq GHz) 50 ohm nominal impedance Insertion loss:.0 x (Freq in GHz) RF leakage: -(90 Freq GHz) Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Construction Center contact: copper alloy, 50 microinches gold over nickel plating Dielectric: PTFE per ASTM D-0 Female body: copper alloy, 50 microinches gold over nickel plating Male body: stainless steel, passivated Male contact spring: high carbon steel (music wire), nickel plated Connector Compatibility MIL-DTL-999 Series I, II, III and IV Glenair Series SuperNine Glenair Series 9 Micro-Crimp Glenair Series 0 Mighty Mouse CABLE (REF) SOLDER Ø./.9 (.6/.55) Ø.5/. (.6/.6) Ø.09/.0 (./.) Male Contact (6.6).6(5.) Ø.50 (.).0/.09 (0./0.) SOLDER HOLE Ø./.9 (.6/.55) Ø.50 (.) Male Contact /.6 (.9/.9).5 (9.0).9/. (.9/.9).0/.00 (0.6/0.6) Female Contact Ø.0 (.05).55 (.).0 (.9).00/.95 (.6/.9).0/.09 (0./0.).0/.05 (./.6) Ø.095/.09 (./.) Ø.6/.5 (./.0) Ø.09/.09 (.6/.6) Ø.6/.5 (./.0) Ø./. (.6/.5) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts Rev. 0..6

27 Spring-Loaded Microwave Frequency Coaxial Contacts Size # SMPM-Type Contacts for DC 0 GHz Cable Prep Dimensions for 5-0 and 5-05 Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI5009 for complete termination instructions. Cable Prep Dimensions for 5-0 Slide prepped cable into contact, then solder cable braid to contact body. See Assembly Instruction Sheet AI500 for complete termination instructions..0 ±.00 (.56 ± 0.5).005 (0.) MIN BREAK EDGE.5 ±.00 (. ± 0.5).005 (0.) MIN BREAK EDGE 90º 90º PRE-TINNED CABLE BRAID.090 ±.00 (.9 ± 0.5) PRE-TINNED CABLE BRAID.090 ±.00 (.9 ± 0.5) Tflex -05 Microwave Cable LLF-0 Microwave Cable FEP JACKET.0 (.6) DIA. SILVER-PLATED COPPER FLAT RIBBON TAPE SOLID SILVER-PLATED COPPER.00 (0.5) DIA. FEP JACKET.05 (.6) DIA. SILVER-PLATED COPPER FLAT RIBBON TAPE SOLID SILVER-PLATED COPPER-COATED STEEL.00 (0.5) DIA. SILVER-PLATED COPPER BRAID.05 (.6) DIA. SOLID PTFE.06 (.6) DIA. SILVER-PLATED COPPER BRAID.05 (.6) DIA. SOLID PTFE.06 (.6) DIA. Glenair Part No Mfgr Part No. TFlex -05 Manufacturer Times Microwave Impedance (ohms) 50 Shielding Effectiveness (db) >00dB Temperature Rating -65 C to +5 C Minimum Bend Radius 0.5 in. (6. mm.) Weight (lbs/ft.).05 Capacitance (pf/ft) 9. Velocity of Propagation % 69.5 Cutoff Frequency 60 GHz Attenuation and Power db/00 ft Watts 00 MHz MHz. 95 GHz. 9 GHz.0 GHz GHz 5.0 GHz.0.5 GHz GHz 99.0 GHz 06.0 Manufacturer Part No. LLF-0 Manufacturer Tensolite Impedance (ohms) 50 Shielding Effectiveness (db) 90 Minimum Bend Radius 0.5 in. (.mm) Weight (lbs/ft.).0 Capacitance (pf/ft) 9 Velocity of Propagation % 0 Attenuation db/00 ft 00 MHz. GHz. GHz.9 0 GHz.9 GHz Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 5

28 Twinax Contacts Size # Concentric Twinax Contacts for M/ Shielded Twisted Pair Cable Pin Contact Concentric twinax contacts accept M/ shielded twisted pair databus cable. These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse connectors and MIL-DTL-999 Series I, III and IV connectors with size # cavities. Crimp termination. Goldplated copper alloy, fluoroplastic dielectric. Supplied unassembled with heatshrink boot. SAE AS909 qualified. M/ Size # Concentric Twinax Contacts Cable Pin Contact Socket Contact (M909/-65) Pin Contact (M909/-65) (M909/-6) Socket Contact.900 (.9) AFTER TERMINATION.0/.09 (0./0.) Ø.6/. (.0/6.) Ø.9/. (5.56/5.5) Ø.6/. (.0/.95) Technical Data Specifications Operating temperature: -65 C. to +5 C. Dielectric withstanding voltage, center contact to intermediate contact: 000 Vrms sea level, 50 Vrms at 0,000 feet Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms sea level, 50 Vrms at 0,000 feet Contact resistance, center and intermediate contacts: 55 millivolt max. voltage ampere Contact resistance, outer contact: 5 millivolt max. voltage A. Durability: 500 mating cycles Shock: MIL-DTL-999 Series III Vibration: MIL-DTL-999 Series III Ø.6/. (.0/6.).0 (.) ø.00 ±.0005 (0.6 ± 0.0) Socket Contact (M909/-6).900 (.9) AFTER TERMINATION.0/.09 (0./0.) Ø.6/. (.0/.95).6 (6.0) CENTER CONTACT MATES WITH ø.00 ±.0005 (0.6 ± 0.0) PIN Ø./. (./.) Construction Center contact, intermediate contact and outer contact: copper alloy, 50 microinches gold over nickel plating Dielectric: PEEK and PTFE Socket contact hood: stainless steel, passivated Heatshrink boot: cross-linked polyvinylidene fluoride, transulcent blue, with thermoplastic hot melt adhesive Connector Compatibility MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse Heatshrink Boot Supplied with contact. Slide onto cable before terminating contact. Slide onto contact after the cable is terminated. Apply heat to shrink the boot and melt the adhesive. Install contact into connector. Ø.5 (5) MIN.90 ±.0 ( ± 0.) HOT MELT ADHESIVE Ø.6 (6) MIN Optional Sealing Boot Sealing boots, purchased separately, provide improved environmental seal compared to heatshrink boot supplied with contacts..50 (.9).95 (5.0).6 (.) Wire Dia. Part No (..) Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

29 Twinax Contacts Size # Concentric Twinax Contacts for M/ Shielded Twisted Pair Cable Contact Part Number Crimp Tools Center Contact Intermediate Contact Outer Crimp Sleeve Crimper Positioner Crimper Hex Die Crimper Hex Die (M50/-0) 09-0 (M50/-) (M50/5-05) (M50/5-05) Center Contact Crimp Tools Intermediate Contact and Outer Sleeve Crimp Tools Removal Tool (M50/-0) 09-0 (M50/-) (M50/5-05) (M969/-) M/ Shielded Twisted Pair Databus Wire (Ref) PFA JACKET.9 (.) DIA. PTFE INSULATION.0 (.0) DIA. SILVER-PLATED COPPER BRAID.0 (.59) DIA. # AWG 9/6 SILVER-COATED COPPER.0 (0.6) DIA. Military Specification MIL-DTL-/6 Military Part Number M/ Continuous working voltage 50 Vrms, maximum Operating frequency 0 MHz, maximum Characteristic Impedance (ohms) ± at MHz Temperature Rating -65 to +00 C Minimum Bend Radius 0.6 in. (5mm.) Weight (lbs/,000 ft.) Capacitance (pf/ft) Attenuation. db per 00 feet, maximum at MHz Velocity of Propagation 6% 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

30 Twinax Contacts Size # Concentric Twinax Contacts for 00 Ohm Twisted Pair Cable Pin Contact Size # concentric twinax contacts accept 00 ohm # AWG controlled impedance shielded twisted pair databus cable. These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse connectors and MIL-DTL-999 Series I, III and IV connectors with size # cavities. Crimp termination. Gold-plated copper alloy. Supplied unassembled with heatshrink boot and assembly instruction sheet. Size # Concentric Twinax Contacts Cable Pin Contact Socket Contact TE Raychem 00A00 Gore GSC Socket Contact SHRINK BOOT.900/.0 (.9/.) Pin Contact 5-0.0/.09 (0./0.) Ø.9/. (5.56/5.5) Ø.6/. (.0/.95) Technical Data Specifications Operating temperature: -65 C. to +5 C. Dielectric withstanding voltage, center contact to intermediate contact: 000 Vrms sea level, 50 Vrms at 0,000 feet Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms sea level, 50 Vrms at 0,000 feet Contact resistance, center and intermediate contacts: 55 millivolt max. voltage ampere Contact resistance, outer contact: 5 millivolt max. voltage A. Durability: 500 mating cycles Shock: MIL-DTL-999 Series III Vibration: MIL-DTL-999 Series III Construction Center contact, intermediate contact and outer contact: copper alloy, 50 microinches gold over nickel plating Dielectric: PEEK and PTFE Socket contact hood: stainless steel, passivated Heatshrink boot: cross-linked polyvinylidene fluoride, transulcent blue, with thermoplastic hot melt adhesive Connector Compatibility MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Glenair Series 0 Mighty Mouse.0 (5.59) HEX AFTER CRIMP SHRINK BOOT.0 (5.59) HEX AFTER CRIMP CENTER PIN DIA. Ø.00 ±.0005 (0.6 ± 0.0) Socket Contact /.0 (.9/.).0/.09 (0./0.) Heatshrink Boot Supplied with contact. Slide onto cable before terminating contact. Slide onto contact after the cable is terminated. Apply heat to shrink the boot and melt the adhesive. Install contact into connector. Ø.5 (5) MIN.90 ±.0 ( ± 0.) HOT MELT ADHESIVE Ø.6 (6) MIN Ø.6/. (.0/.95).6 (6.0) Ø./. (./.) Optional Sealing Boot Sealing boots, purchased separately, provide improved environmental seal compared to heatshrink boot supplied with contacts..50 (.9).95 (5.0).6 (.) Wire Dia. Part No (..) Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

31 Twinax Contacts Size # Concentric Twinax Contacts for 00 Ohm # AWG Twisted Pair Cable Contact Part Number Crimp Tools Center Contact Intermediate Contact Outer Crimp Sleeve Instruction Sheet Crimper Positioner Crimper Hex Die Crimper Hex Die (M50/-0) 09-0 (M50/-) (M50/5-05) (M50/5-05) AI5-0 Center Contact Crimp Tools Intermediate Contact and Outer Sleeve Crimp Tools Removal Tool (M50/-0) 09-0 (M50/-) (M50/5-05) (M969/-) Raychem 00A00 00 Ohm # AWG Twisted Pair Cable Gore GSC # AWG Twisted Pair Cable MODIFIED FEP JACKET.9 (.) DIA. FOAMED FEP INSULATION.05 (.) DIA. MODIFIED E FILL CONDUCTOR AWG 9X6 SILVER PLATED HS COPPER ALLOY FILLERS PTFE WIRE INSULATION FEP OVER EXPANDED PTFE, 0.0 mm WALL WHITE, BLUE BINDER GORE-TEX TAPE # AWG TIN-COATED COPPER BRAID.5 (.) DIA. # AWG 9/6 SILVER-COATED COPPER.05 (0.6) DIA. BRAID SHIELD AWG SILVER-PLATED COPPER BRAID 95% MIN. COVERAGE JACKET FEP. mm, TRANSPARENT Characteristic Impedance 00 ± MHz capacitance, mutual 5 pf/ft. (nominal) Velocity of Propagation 6% (nominal) Conductor resistance 6.5 ohms/000 ft (nominal) Dielectric Withstanding Voltage 000 Vrms Temperature Rating -55 C to +00 C Characteristic Impedance 00 ± MHz capacitance, mutual pf/m. (nominal) Velocity of Propagation % (nominal) Conductor resistance 5 ohms/km (nominal) Dielectric Withstanding Voltage 000 Vrms Temperature Rating -65 C to +00 C 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 9

32 Twinax Contacts Size # Concentric Twinax Contacts for M/ Shielded Twisted Pair Cable Size # concentric twinax contacts accept M/ shielded twisted pair databus cable. These snap-in, rear-release contacts fit MIL-DTL-999 Series I, III and IV connectors with size # cavities, and Glenair Series SuperNine connectors. Crimp termination. Gold-plated copper alloy. Interface is in accordance with JN0, DSCC 000 and DSCC 000 specifications. Size # Concentric Twinax Contacts Cable Pin Contact Socket Contact M/ Pin Contact Ø.095/.09 (./.6).00/.95 (.6/.9) Ø.5/. (.5/.6).0 (6.6) Technical Data Specifications Operating temperature: -650C. to +50C. Operating frequency: 0 0 MHz Dielectric withstanding voltage, center contact to intermediate contact: 00 Vrms Dielectric withstanding voltage, intermediate contact to outer contact: 500 Vrms Contact resistance, center and intermediate contacts: 55 millivolt max. voltage ampere Contact resistance, outer contact: 5 millivolt max. voltage amperes Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- Construction Center contact, intermediate contact, outer contact, rear bushing: copper alloy, 50 microinches gold over nickel plating Inner and outer crimp sleeves: copper alloy, 50 microinches gold over nickel plating Rear bushing: copper alloy, 50 microinches gold over nickel plating Insulators: PEEK, PTFE Socket contact hood: stainless steel, passivated Connector Compatibility MIL-DTL-999 Series I, III and IV Glenair Series SuperNine Ø.6 (.09) Ø.055/.05 (0.9/0.6) OUTER CONTACT MATES WITH Ø.095/.09 (./.6) PIN Ø.05/.055 (./.6).0/.09 (0./0.) Socket Contact Ø./.9 (.6/.55).96 (.6).66/.60 Ø.5/. (5.90/5.5) (.5/.6) INTERMEDIATE CONTACT.0/.09 (0./0.) Ø./.9 (.6/.55) M/ Shielded Twisted Pair Databus Wire (Ref) PFA JACKET.9 (.) DIA. PTFE INSULATION.0 (.0) DIA. SILVER-PLATED COPPER BRAID.0 (.59) DIA. # AWG 9/6 SILVER-COATED COPPER.0 (0.6) DIA. Military Specification MIL-DTL-/6 Military Part Number M/ Continuous working voltage 50 Vrms, maximum Operating frequency 0 MHz, maximum Characteristic Impedance ± at MHz Temperature Rating -65 to +00 C Minimum Bend Radius 0.6 in. (5mm.) Weight (lbs/,000 ft.) Capacitance (pf/ft) Attenuation. db per 00 feet, max. at MHz Velocity of Propagation 6% 0 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

33 Twinax Contacts Size # Concentric Twinax Contacts for M/ Shielded Twisted Pair Cable Pin Contact Details FRONT INSULATOR MIDDLE INSULATOR PIN BODY INNER PIN CONTACT REAR BUSHING INNER CRIMP SLEEVE INTERMEDIATE SOCKET CONTACT OUTER CONTACT ASSEMBLY OUTER INSULATOR REAR INSULATOR INNER CONTACT ASSEMBLY OUTER CRIMP SLEEVE Contact Part Number Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet Crimp Tools Inner Contact Intermediate Contact Outer Contact Crimper Positioner Crimper Positioner Crimper Hex Die 09- (MH99) 59-5 (K65) 59-6 (GS) 59- (GP) 09- (M50/-0) 59- (GP959) Insertion/ Removal Tool 09- (M969/-0) Assembly Instruction Sheet AI50 Center Contact Crimp Tools Intermediate Contact Crimp Tools Outer Contact Crimp Tools Installation/ Removal Tool 09- (MH99) 59-5 (K65) 59-6 (GS) 59- (GP) 09- (M50/-0) 59- (GP959) 0- (M969/-0) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

34 Twinax Contacts Size # Differential Twinax Contacts Pin Contact Differential twinax contacts accept shielded twisted pair cable. These snap-in, rear-release contacts fit Glenair Series 0 Mighty Mouse connectors and Glenair - MIL-DTL-999 type connectors with keyed inserts. Crimp termination. and 6 AWG versions. 6 ohm, 5 ohm, ohm and 00 ohm impedance. Gold-plated copper alloy. Supplied unassembled with sealing boot and instruction sheet. Socket Contact Shielded Twisted Pair Cable GSC (Gore) 00A00 (TE Raychem) M/ (MIL-DTL-) /50X (Tensolite ref: 5M0-00) ST5M-00 (McDonnell Douglas) DXN60 (Gore) 6D066 (TE Raychem) Size # Differential Twinax Contacts Wire Size (AWG) Impedance (ohms) Pin Contact Socket Contact F 5-0-0F F 5-0-0F F F F F F 5-0-0F F F F 5-0-0F Technical Data Specifications Construction Connector Compatibility Operating temperature: -65 C. to +5 C. Operating frequency: 0 0 MHz Dielectric withstanding voltage, inner contact to inner contact: 000 Vrms Dielectric withstanding voltage, inner contact to outer body: 500 Vrms Insulation resistance: 5000 megohms min. Contact resistance, inner contacts: 55 millivolt max. voltage ampere Contact resistance, outer body: 5 millivolt max. voltage amperes Durability: 500 mating cycles Shock: EIA-6- condition D Vibration: EIA-6- condition VI, letter J Inner contacts, outer body: copper alloy, 50 microinches gold over nickel plating Crimp ferrule: copper alloy, 50 microinches gold over nickel plating Insulators: PPS Sealing boot: fluorosilicone rubber grommet, glass-filled PEI follower Differential twinax contacts have an alignment key and are not for use in standard MIL-DTL-999 connectors Glenair - MIL-DTL-999 Series III connectors with keyed inserts for contact alignment. Glenair Series 0 Mighty Mouse. All standard Mighty Mouse connectors with size # contacts have keyed contact cavities for proper alignment of differential twinax, quadrax, and octaxial contacts. Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the F suffix from the part number.95 (5.0).50 (.9).6 (.) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

35 Twinax Contacts Size # Differential Twinax Contacts Pin Contact 5-0 and /.0 (.9/.) Ø.6/. (.0/6.).0/.09 (0./0.) POLARIZATION KEY Ø.9/. (5.56/5.5) Ø.6/. (.0/.95). (.). (5.5) HEX CRIMP.05/.95 (.5/.9) ø.050 ±.0005 (0.6 ± 0.0) TWO PLACES Socket Contact 5-0 and 5-0 INNER CRIMP BUSHING Ø.6/. (.0/6.).900/.0 (.9/.).0/.09 (0./0.) POLARIZATION KEY Ø./. (./.) Ø.6/. (.0/.95). (.). (5.5) HEX CRIMP.6/.65 (6.0/5.) SKT TO ACCEPT.05 (0.6) PIN PLACES Crimp Tools, Removal Tool, Assembly Instruction Sheet Contact Part Number Inner Contacts Outer Body Crimper Positioner Crimper Hex Die Removal Tool Assembly Instruction Sheet (M50/-0) 09-0 (M50/-) (M50/5-5) (M969/-) AI500 Inner Contact Crimp Tools Outer Body Crimp Tools Removal Tool (M50/-0) 09-0 (M50/-) (M50/5-5) (M969/-) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

36 Twinax Contacts Size # Differential Twinax Contacts Shielded Twisted Pair Cables for Differential Twinax Contacts Raychem 00A00 00 Ohm AWG Twisted Pair Cable Gore GSC Ohm AWG Twisted Pair Cable Raychem 6D066-9 Ohm 6 AWG Twisted Pair Cable MODIFIED FEP JACKET.9 (.) DIA. # AWG TIN-COATED COPPER BRAID.5 (.) DIA. FOAMED FEP INSULATION.05 (.) DIA. MODIFIED ETFE FILLERS # AWG 9/6 SILVER-COATED COPPER.05 (0.6) DIA. FEP JACKET.5 (.9) DIA. FEP OVER EXPANDED PTFE INSULATION # AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID >90% COVERAGE ALUMINIZED POLYIMIDE FOIL eptfe FILLERS # AWG 9/6 SILVER-COATED COPPER CROSS-LINKED MODIFIED ETFE JACKET.0 (.) DIA. # AWG TIN PLATED COPPER BRAID.09 (.) DIA. CROSS-LINKED MODIFIED ETFE INSULATION.0 (0.9) DIA. MODIFIED ETFE FILLERS.05 (0.6) DIA. #6 AWG 9/ SILVER-COATED HS COPPER.00 (0.5) DIA. Impedance DWV rating Temperature Rating 00 ± MHz 000 Vrms -55 to +00 C Impedance DWV Rating Temperature Rating 00 ± ohms 000 Vrms -65 to +00 C Impedance DWV rating Temperature Rating ± 5 MHz 000 Vrms -65 to +50 C Gore DXN60 00 Ohm 6 AWG Twisted Pair Cable M/ Shielded Twisted Pair Databus Cable Tensolite /50X 5 Ohm AWG Twisted Pair Cable.00 (.5) PTFE JACKET eptfe INSULATION.09 (.) DIA. PFA JACKET.9 (.) DIA. PTFE INSULATION.0 (.0) DIA. FEP JACKET. (.5) DIA. PTFE INSULATION.06 (.) DIA. #0 AWG SILVER-COATED COPPER ALLOY BRAID #6 AWG 9/ SILVER-COATED COPPER ALLOY. SILVER-PLATED COPPER BRAID.0 (.59) DIA. # AWG 9/6 SILVER-COATED COPPER.0 (0.6) DIA. SILVER-PLATED AWG COPPER BRAID 90% MIN. COVERAGE.0 (.9) DIA. # AWG 9/6 SILVER-COATED COPPER.0 (0.6) DIA. Impedance 00 ± 0 ohms Attenuation. db / 00 GHz Temperature Rating +00 C Impedance (ohms) DWV Rating Temperature Rating ± at MHz 000 Vrms -65 to +00 C Impedance (ohms) 5 ± 5 DWV Rating 500 Vrms Temperature Rating -65 to +00 C ST5M-00 6 Ohm AWG Twisted Pair Cable FEP JACKET. (.5) DIA. PTFE INSULATION.0 (.) DIA. # AWG SILVER PLATED COPPER BRAID.06 (.69) DIA. # AWG 9/6 SILVER-COATED COPPER.05 (0.6) DIA. Impedance DWV rating Temperature Rating 6 ± ohms 500 Vrms -65 to +00 C 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

37 Ultra-Twinax Contacts Size # Ultra-Fast Differential Twinax Contacts for DC 0 GHz Frequency Range Pin Contact Glenair Ultra-Twinax differential twinax contacts are suited for multi-gigabit data rate applications such as CML, LVDS and other advanced digital communications protocols. Size # 00 ohm contacts feature DC 0 GHz frequency range. Use with high-speed #0 AWG twisted pair cable These contacts are compatible with Glenair Series 0 Mighty Mouse connectors with size # cavities. Snap-in, rear release. Solder termination. Supplied as kit with body, front insulator-solder contact subassembly, and rear insulator. Gold-plated copper alloy, glass-filled PTFE insulator. Features DC 0 GHz frequency range 00 ohm impedance Aerospace-grade construction Low insertion loss Applications LVDS SATA.0 DisplayPort CML Socket Contact Cable (Glenair) Wire Size (AWG) Size # Ultra-Twinax Contacts Impedance (ohms) Pin Contact Socket Contact Assembly Instruction Sheet AI505 Technical Data Specifications Construction Connector Compatibility Operating temperature: -650C. to +050C. Operating frequency: 0 0 GHz Impedance: 00 ohms VSWR:. + (.0 X Freq GHz) Insertion loss : (. X Freq GHz) Dielectric withstanding voltage: 500 Vrms Insulation resistance: 5000 megohms min. Durability: 500 mating cycles Inner contacts, outer body: copper alloy, 50 microinches gold over nickel plating Insulator: glass-filled PTFE Rear insulator: PPS Socket hood: stainless steel, passivated Glenair Series 0 Mighty Mouse. All standard Mighty Mouse connectors with size # contact accommodation have keyed contact cavities for proper alignment of ultra-twinax contacts. Pin Contact Design Features Socket Contact Design Features FRONT INSULATOR BODY REAR INSULATOR 0 AWG TWISTED PAIR CABLE HOOD BODY REAR INSULATOR 0 AWG TWISTED PAIR CABLE SOCKET CONTACTS SOLDER TERMINATIONS PIN CONTACTS FRONT INSULATOR SOLDER TERMINATIONS 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 5

38 Twinax Contacts Size # Ultra-Fast Differential Twinax Contacts for DC 0 GHz Frequency Range Pin Contact Socket Contact ALIGNMENT KEY Ø.096 (.).560 (.).00/.96 Ø. (.6/.5) (.6).00 (.0) ALIGNMENT KEY.550 (.9) Ø.5.90/.0 (./.) (.) A B A B Ø.6 (.09).05/.0 (0.6/0.).00 (.0).0/.00 (0./0.6) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT Ø.6 (.0) Ø.5 (.) CAVITY IDENTIFICATION SHOWN FOR REFERENCE ONLY AND IS NOT MARKED ON CONTACT.0/.00 (0./0.6) Ø. (.) Ø.6 (.0) VSWR Performance Data VSWR Insertion Loss.000 Contacts Only Cable Only ( in.) Cable and Contacts Frequency (GHz) Frequency (GHz) Insertion Loss (db) Conductors Insulation Inner shield Outer shield Jacket Temperature Rating Ohm Twisted Pair Cable Specifications 0 AWG silver-coated high strength copper alloy, 9/ strand PFA, white and yellow,.0 dia..005" aluminum/polyester tape Silver-coated 0 AWG braid, 90% minimum coverage PFA, black -65 to +05 C #0 AWG SILVER-COATED HIGH STRENGTH COPPER ALLOY BRAID Part Number ±.006 (. ± 0.5) PFA INSULATION Impedance Capacitance DC resistance Attenuation (nominal) 00 ± 0 ohms 5.0 pf/ft (cond-cond) 9.55 ohms/000 ft. maximum MHz, GHz PFA JACKET, BLACK.0 ±.00 (0. ± 0.05) #0 AWG 9/ SILVER-COATED HIGH STRENGTH COPPER ALLOY Velocity of Propagation 0% 6 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

39 Quadrax Contacts Size # 00 Ohm and 50 Ohm Quadrax Contacts Quadrax contacts are size multi-pin contacts with four signal pins and an outer contact body. These contacts are used for harsh environment military and aerospace data networks using star quad cable. Crimp termination. Two types are available: 00 ohm for 00BASE-T Ethernet and 50 ohm for fibre channel. Compatible with Glenair Series 0 Mighty Mouse and Glenair - SuperNine connectors. Supplied as unassembled kit with outer body, () inner contacts, shield crimp ferrule, insulators, sealing boot and instruction sheet. Socket Contact DC GHz frequency range 00 ohm and 50 ohm versions Arinc 66 compatible Snap-in, rear release Sealing boot included Gold plated copper alloy Size # 00 Ohm Quadrax Contacts Wire Ref Cable Size Imped. Diameter A Hex Crimp Cable Accomodation (AWG) (ohms) In. mm. In. mm. Mfgr. Part Number Pin Contact Socket Contact Tensolite NFQ F F PIC E (various) Gore Tensolite TE AS600- GSC NFQ00-0 CEC-RWC-66 Draka F 0- PIC (various) Tensolite PIC E50 ABS50KD NF6Q00-0 E F F F F F F Size # 50 Ohm Quadrax Contacts for Fibre Channel (not intermateable with 00 ohm quadrax contacts) 6 50 Fibre Channel Tensolite Gore Technical Data 6/0006X-(LD) RCN F 5-0-0F Specifications Construction Connector Compatibility Operating temperature: -65 C. to +5 C. Operating frequency: DC GHz Characteristic Impedance: 00 ±0 ohms or 50 ± 0 ohms Dielectric withstanding voltage, inner to inner contact: 000 Vrms sea level, 50 Vrms 0,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 50 Vrms 0,000 feet. Insulation resistance: 5000 megohms min. Durability: 500 mating cycles Vibration: MIL-DTL-999 Series III Shock: MIL-DTL-999 Series III Inner contacts, outer contact, shield crimp ferrule: copper alloy, 50 microinches gold over nickel plating Insulator: PPS Sealing boot grommet: fluorosilicone Sealing boot body: rigid thermoplastic, PEI or equivalent Quadrax contacts have an alignment key and are not for use in standard MIL-DTL-999 connectors Glenair Series 0 Mighty Mouse Glenair - SuperNine 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

40 Quadrax Contacts Size # 00 Ohm and 50 Ohm Quadrax Contacts Quadrax Contact Cutaway REAR INSULATOR STAR QUAD CABLE FRONT INSULATOR OUTER CONTACT OUTER CONTACT FRONT INSULATOR REAR INSULATOR STAR QUAD CABLE SHIELD FERRULE MIDDLE INSULATOR INNER CONTACTS () INNER CONTACTS () MIDDLE INSULATOR SHIELD FERRULE Pin Contact Socket Contact Pin Contact 5-00 and 5-05 Ø.6/. (.0/6.).90 (.).0/.09 (0./0.) PIN NO. DESIGNATION (NOT MARKED ON POLARIZATION PART) KEY Ø.9/. (5.56/5.5) Ø.6/. (.0/.95). (.) A HEX CRIMP.05/.95 (.5/.9) INNER PIN DIAMETER 00 OHM: Ø.05 (0.6) 50 OHM: Ø.00 (0.5). (.) Socket Contact 5-00 and 5-0 Ø.6/. (.0/6.).0 (9.56).0 (0.).09 (0.) PIN NUMBER DESIGNATION (REF ONLY, NOT MARKED ON POLARIZATION PART) KEY Ø./. (./.) Ø.6/. (.0/.95). (.) A HEX CRIMP.6/.65 (6.0/5.) SOCKET TO ACCEPT INNER PIN DIAMETER 00 OHM: Ø.05 (0.6) 50 OHM: Ø.00 (0.5). (.) Contact PN Crimp Tools, Removal Tool, Assembly Instruction Sheet Inner Contacts Outer Body Removal Crimper Positioner Crimper Hex Die Tool (M50/-0) 09-0 (M50/-) (M50/5-5) (M969/-) Assembly Instructions AI5-00 Sealing Boot Sealing boots are supplied with contacts. To order contacts without sealing boots, remove the "F" suffix from the part number (M50/-0) 09-0 (M50/-) (M50/5-5) (M969/-) AI50 Inner Contact Crimp Tools Outer Body Crimp Tools Removal Tool.95 (5.0) (M50/-0) 09-0 (M50/-) (M50/5-5) (M969/-).50 (.9).6 (.) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

41 Quadrax Contacts Aerospace-Grade Star Quad Cable About Star Quad Cable Star quad cables are widely used for 00 ohm ARINC 66 0/00BASE-T Ethernet and 50 ohm fibre channel. Quad cable, when paired with quadrax contacts, offers improved EMI protection and better data integrity compared to shielded twisted data pair cable terminated to individual connector pins.this illustration depicts SAE AS600/ high speed data quad cable. This construction, with two shields and fluoropolymer insulation, is typical of aerospace star quad cables available from Gore, Carlisle (Tensolite), PIC, TE, Draka and other cable manufacturers. The table below lists standard star quad cables available from Glenair. CONDUCTOR AWG 9X6 SILVER PLATED COPPER ALLOY INSULATION EXPANDED PTFE OR FOAMED FEP, PFA,.06 INCH ±.00 PAIR : RED, BLUE PAIR : YELLOW, GREEN BINDER PTFE TAPE FIRST SHIELD FLAT SILVER-PLATED COPPER BRAID 9% MIN. COVERAGE SECOND SHIELD ROUND SILVER-PLATED COPPER BRAID 5% MIN. COVERAGE JACKET FEP.60 INCH ±.00 FILLER FLUOROPOLYMER Star Quad Cables Available From Glenair Glenair Part No Manufacturer Part No. NFQ00-0 NFQ00-0 NF6Q00-0 E50 E5 E56 Manufacturer Tensolite Tensolite Tensolite PIC PIC PIC Construction Details Conductor Size (AWG) 6 6 Conductor Material SCC SCCA SCCA SCC SCC SCC Insulation Insulation Color Extruded PTFE over fused PTFE tape Pair : Red, Blue Pair : Green, Yellow Extruded PTFE over fused PTFE tape Pair : Red, Blue Pair : Green, Yellow Extruded PTFE over fused PTFE tape Pair : Red, Blue Pair : Green, Yellow PTFE Foamed FEP Foamed FEP Pair : Red, Blue Pair : Green, Yellow Pair : Red, Blue Pair : Green, Yellow Pair : Red, Blue Pair : Green, Yellow Binder PTFE PTFE PTFE PTFE PTFE Shield Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Inner foil, outer SCC round braid Inner TCC flat braid, outer TCC round braid Inner TCC flat braid, outer TCC round braid Jacket FEP FEP FEP FEP ETFE ETFE Jacket Color Translucent Blue Translucent Blue Translucent Blue Translucent Blue White White Nominal Cable Diameter (.).0 (.).6 (.09).6 (.09) Specifications Impedance (ohms) Temperature Rating +50 C +50 C +50 C +00 C +50 C +50 C Weight (lbs/00 ft.) Capacitance (pf/ft).5 Velocity of Propagation % Time Delay ps/ft Max. Attenuation db/00 ft., 00 MHz Min. NEXT (db), 00 MHz Min. SRL (db), 00 MHz Notes SCC silver-coated copper SCCA silver-coated copper alloy TCC tin-coated copper Cables are Skydrol resistant, RoHS compliant and meet the FAA flammability requirements of FAR Part and 5, Appendix F 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 9

42 El Ochito Octaxial Contacts for 0G Ethernet Size # 00 Ohm El Ochito Contacts The 0G Ethernet Contact with Patented Data Pair Isolator Technology United States Patent Number 9,5,96 El Ochito contacts are intended for harsh environment military and aerospace data networks utilizing 000BASE-T or 0GBASE-T protocols. El Ochito contacts provide up to 50% total weight savings compared to quadrax-based solutions. These contacts have eight signal pins housed in a machined, gold plated outer contact. Crimp termination. Metal spline isolates data pairs for improved signal integrity. For use with aerospace-grade 6 AWG Category 6a cables with unshielded or shielded data pairs. El Ochito contacts snap into ARINC 600 connectors with quadrax inserts, along with Series 0 Mighty Mouse and Series SuperNine connectors. Supplied as unassembled kit with outer body, () inner contacts, shield crimp ferrule, insulators, and instruction sheet. DC GHz frequency range 00 ohms Data pair isolation technology 50% size and weight savings compared to quadrax contacts Snap-in, rear release Sealing boot included Gold plated copper alloy 0GBase-T compatible Technical Data Pin Contact Socket Contact Specifications Operating temperature: -65 C. to +5 C. Operating frequency: DC GHz Characteristic Impedance: 00 ±0 ohms Dielectric withstanding voltage, inner to inner contact: 000 Vrms sea level, 50 Vrms 0,000 feet. Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, 50 Vrms 0,000 feet. Insulation resistance: 5000 megohms min. Durability: 500 mating cycles Vibration: MIL-DTL-999 Series III Shock: MIL-DTL-999 Series III Construction Inner contacts, outer contact, shield crimp ferrule: copper alloy, 50 microinches gold over nickel plating Front, middle and rear insulator: PPS Sealing boot grommet: fluorosilicone Sealing boot body: rigid thermoplastic, PEI or equivalent Connector Compatibility El Ochito contacts have an alignment key and are not for use in standard MIL-DTL-999 connectors Glenair Series 0 Mighty Mouse Glenair - SuperNine ARINC 600 quadraxial inserts Connector Type Size # El Ochito Contacts for Aerospace High Speed Ethernet Cable Cable Cable Type Cable Description Pin Contact Mfgr. Part Number Glenair Part No. Socket Contact ARINC 600 S/UTP S/FTP Unshielded twisted pairs, 6 AWG Foil shields on individual twisted pairs, 6 AWG PIC E6A6 Gore RCN Series SuperNine Series 0 Mighty Mouse S/UTP S/FTP Unshielded twisted pairs, 6 AWG Foil shields on individual twisted pairs, 6 AWG PIC E6A6 Gore RCN F F F 5-0-0F 0 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

43 El Ochito Octaxial Contacts for 0G Ethernet Size # 00 Ohm El Ochito Contacts El Ochito 0gbE Octaxial Contact Construction Details Crimp Ferrule Contact Organizer Insulator Crimp Ferrule Contact Organizer Insulator Plastic Bushing Data Pair Isolator Plastic Bushing Data Pair Isolator Socket Contacts () Front Insulator Pin Contacts () Front Insulator Outer Contact Outer Contact Pin Contact Socket Contact Contact PN F F Crimp Tools, Removal Tool, Assembly Instruction Sheet Inner Contacts Outer Body Removal Crimper Positioner Crimper Hex Die Tool (M50/-0) (M50/-0) 59-0 (K906) 59-0 (K906) (M50/5-5) (M50/5-5) (M969/-) (M969/-) Assembly Instructions AI50 AI50 Sealing Boot Sealing boots are supplied with 5-00, 5-00, 5-06 and 5-0 contacts. To order these contacts without sealing boots, delete the F suffix from the part number. Sealing boots are not supplied with and 5-00 contacts..9 (.6) F 5-0-0F (M50/-0) (M50/-0) 59-0 (K906) 59-0 (K906) 59-5 (not required) 59- (GS06) (not required) (M969/-) (M969/-) Ø.0 (9.0) SEALING BOOT FOR OCHITO CONTACTS USING.0 (5.59) DIAMETER CABLE Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

44 El Ochito Octaxial Contacts for 0G Ethernet Size # 00 Ohm El Ochito Contacts 5-00 and 5-06 El Ochito Pin Contact for - SuperNine and Series 0 Mighty Mouse CABLE (REF) Ø.6/. (.0/6.).90 (.) SHIELD CRIMP 5-00:. (5.) HEX 5-06:.65 (6.) ROUND.0/.09 (0./0.) POLARIZATION KEY Ø.9/. (5.56/5.5).05/.95 (.5/.9) Ø.6/. (.0/.95).060 (.5) 6 5 PIN NO. DESIGNATION (NOT MARKED ON PART) 5-00 and 5-0 El Ochito Socket Contact for - SuperNine and Series 0 Mighty Mouse CABLE (REF) Ø.6/. (.0/6.).0 (9.56).0/.09 (0./0.) SHIELD CRIMP 5-00:. (5.) HEX 5-0:.65 (6.) ROUND POLARIZATION KEY.6/.65 (6.0/5.) Ø./. (./.) Ø.6/. (.0/.95).060 (.5) 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART) El Ochito Pin Contact for ARINC 600 Connectors with Quadraxial Inserts Ø.6/. (.0/6.) SHIELD CRIMP F:. (5.) HEX F:.65 (6.) ROUND.90 (.9).0/.09 (0./0.).55/.505 (.0/.) POLARIZATION KEY Ø.9/. (5.56/5.5) Ø.6/. (.0/.95).05/.0 (.9/.5) 6 5 PIN NO. DESIGNATION (NOT MARKED ON PART) 5-00 El Ochito Socket Contact for ARINC 600 Connectors with Quadraxial Inserts CABLE (REF) Ø.6/. (.0/6.).90 (.9).0/.09 (0./0.) SHIELD CRIMP F:. (5.) HEX F:.65 (6.) ROUND.600/.590 (5./5.00) POLARIZATION KEY Ø./. (./.) Ø.6/. (.0/.95) 5 6 PIN NO. DESIGNATION (NOT MARKED ON PART).05/.0 (.9/.5) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

45 El Ochito Octaxial Contacts for 0G Ethernet Wiring Guidelines Implementation Guidelines for Terminating El Ochito Contacts to -Pair Wire ARINC Specification 66 Part - Appendix N provides guidelines for implementing 000BASE-T and 0GBASE-T Ethernet links utilizing El Ochito contacts. These guidelines provide instructions on maintaining the geometric relationship between the El Ochito contact and the wire. The wire has an A end and a B end as shown in Figure. A contact installed on end A has a different wiring schematic than a contact installed on end B. This is done to prevent the four wire pairs to be crossed contrary to their natural twist or lay. System designers and integrators should refer to ARINC 66 Part for full guidance on specifying the connectors used throughout the data link. The ARINC specification allows only four possible contact number-to-wire color combinations. Figure shows these four combinations. The wire designer must specify which wire end (A or B) to terminate to each connector. Following the pin number- wire colors in Figure will ensure cable assemblies are assembled with the correct wire rotation. W/BL BRN BLU W/BR W/OR GRN ORN W/GR End A Wire pair clockwise rotation is: (WHT/BLU+BLU) (WHT/ORN+ORN) (WHT/GRN+GRN) (WHT/BRN+BRN) End A 6 5 Pin with END A Color Assignments -Pair Aircraft-Grade Ethernet Cable Figure Wire Rotation 5 6 Socket with END A Color Assignments -Pair Aircraft-Grade Ethernet Cable 6 5 Pin with END B Color Assignments W/OR GRN ORN W/GR End B W/BL BRN BLU W/BR End B Wire pair clockwise rotation is: (WHT/BLU+BLU) (WHT/BRN+BRN) (WHT/GRN+GRN) (WHT/ORN+ORN) 5 6 Socket with END B Color Assignments ARINC 66 Wiring Configurations Figure Contact Color Assignment Pin Socket Pin Pin Socket Socket PIN CABLE END A SOCKET CABLE END B WHT/BLU BLUE WHT/ORN ORN 5 WHT/GRN 5 6 GRN 6 WHT/BRN BRN PIN CABLE END A WHT/BLU BLUE WHT/ORN ORN 5 WHT/GRN 6 GRN WHT/BRN BRN PIN CABLE END B 5 6 SOCKET CABLE END A SOCKET CABLE END B WHT/BLU BLUE WHT/ORN ORN WHT/GRN 5 GRN 6 5 WHT/BRN 6 BRN Figure Schematic for Pin Socket Wiring Figure Schematic for Pin Pin Wiring Figure 5 Schematic for Socket Socket Wiring 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

46 El Ochito Octaxial Contacts for 0G Ethernet Signal Integrity Data Excellent signal integrity at Gigabit speeds with S/UTP Cable El Ochito contacts with internal metal spline reduce crosstalk and attenuation for superior electrical bandwidth up to 9 Gbps. At -db insertion loss for a single mated pair at. GHz, the El Ochito contact offers performance exceeding the requirements for 0 GbE interconnects. Insertion Loss (db) Return Loss (db) Return Loss Two Mated Pair of Ochito Contacts with 0" of Cable Ochito Contact Insertion Loss Single Mated Pair Frequency (GHz) Frequency (GHz) Attenuation (db) FEXT Two Mated Pair of Ochito Contacts with 0" of Cable Frequency (GHz) These graphs illustrate data shown in Glenair Test Report GT-5-0 High Speed Characterization Report: El Ochito Size Multi- Pair Contact for Differential Applications. All measurements were taken using an Agilent E50C network analyzer with TDR option connected to a SMA launch board designed specifically for this testing. Test cables were fabricated using 00 ohm Glenair twisted pair S/UTP Ethernet cable terminated to El Ochito pin contact The mating PC tail socket 5-00 was assembled onto the PCB launch fixture shown below. Attenuation (db) NEXT Two Mated Pair of Ochito Contacts with 0" of Cable Frequency (GHz) 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts

47 El Ochito Octaxial Contacts for 0G Ethernet Signal Integrity Data 0GBase-T Cat 6a Compliance Testing SEGMENT 5m SEGMENT 5m SEGMENT 0m SEGMENT 0m PIN CONTACT m ADAPTER CABLE RJ-5 PLUG FLUKE DSX-5000 MAIN CAT 6a CABLE Testing was performed to assure compliance with TIA/EIA 56B Cat 6a requirements. Four cordset segments were connected in series for a combined length of 0m, with a total of five mated pairs of El Ochito contacts. REF: Glenair Test Report GT-5-. SOCKET CONTACT 5-0 RJ-5 PLUG FLUKE DSX-5000 REMOTE 60 Insertion Loss (db) MHz NEXT (db) MHz Remote (db) MHz 00 RL (db) 00 ACR-F (db) 00 Remote (db) MHz MHz MHz 00 0 Remote (db) 0 ACR-N (db) 0 Remote (db) MHz MHz MHz 06 Glenair, Inc Air Way, Glendale, CA U.S. CAGE code 06 High-Speed Contacts 5