PMS Centrifugal pumps
|
|
|
- Dustin Parsons
- 7 years ago
- Views:
Transcription
1 EN Centrifugal pumps Technical data Delivery rate Q max = 400 l/min Delivery head H max = 45 m Delivery temperature T = 0 C bis +0 C Kinematic viscosity ν max = 20 mm 2 /s Quality Management DIN EN ISO 9001: Environmental Management DIN EN ISO Health and Safety Management OHSAS 1001
2 2 Centrifugal pumps spandaupumpen.com Symbolisierung der verschiedenen Fördermedien 05, 06, 0, 10 Immersion pumps, sealless 50 Hz, open impellers stark verunreinigte Fördermedien leicht verunreinigte Fördermedien reine Fördermedien p [psi] 10 H [m] 7, Hz 9 6,5 6,0 5, , Delivery head 1) 6 5 4,5 4,0 3, Features Vertical multistage pump Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G3/ ,0 2,5 2,0 1,5 1,0 0, Q [l/min] Unventilated motor 0 2,5 5,0 7,5 10,0 12,5 15,0 17,5 20,0 22,5 Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 100 l/min Delivery head H max Immersion depth t max 7 m mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size Contamination 0 C to 60 C 0 C to 0 C max. Ø5 mm max. 10 kg/m³ Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" PTFE graphite Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Splash ring material "P" NBR Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
3 spandaupumpen.com Centrifugal pumps 3 l Symbolisierung der verschiedenen Fördermedien 05, 06, 0, 10 Immersion pumps, sealless 50 Hz, open impellers stark verunreinigte Fördermedien leicht verunreinigte Fördermedien reine Fördermedien øm Variation "V" with bottom for extension tube k a 20 G ¾ ø40 ø115 / 4 ø7 ø100 b max. level of fluid t min. level of fluid 45 ø100 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] 230/400 A 0,09 0,46/0, ,4 5, /400 A 0,09 0,46/0, ,4 5, /400 B 0,12 0,50/0, ,4 5, /400 C 0,1 0,3/0, ,3 7,3 55 Sonic Pressure pressure port [dba] (DIN ISO 22) G¾
4 4 Centrifugal pumps spandaupumpen.com 05, 06, 0, 10 Immersion pumps, sealless 60 Hz, open impellers p [psi] 10 H [m] 7, Hz 9 6,5 6,0 5, , Delivery head 1) 6 5 4,5 4,0 3, Merkmale Vertical multistage pump Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G3/ ,0 2,5 2,0 1,5 1,0 0, Q [l/min] Unventilated motor 0 2,5 5,0 7,5 10,0 12,5 15,0 17,5 20,0 22,5 Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 100 l/min Delivery head H max Immersion depth t max 7 m mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size Contamination 0 C bis 60 C 0 C bis 0 C max. Ø5 mm max. 10 kg/m³ Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" PTFE graphite Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Splash ring material "P" NBR Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
5 spandaupumpen.com Centrifugal pumps 5 05, 06, 0, 10 Immersion pumps, sealless 60 Hz, open impellers l øm Variation "V" with bottom for extension tube k 20 a G ¾ ø40 ø115 / 4 ø7 ø100 b max. level of fluid t min. level of fluid 45 ø100 Electrical data, dimensions and weights at 60 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] 265/460 A 0,09 0,46/0, ,4 5, /460 A 0,09 0,46/0, ,4 5, /460 B 0,12 0,50/0, ,4 5, /460 C 0,1 0,3/0, ,3 7,3 55 Sonic Pressure pressure port [dba] (DIN ISO 22) G¾
6 6 Centrifugal pumps spandaupumpen.com 25 Immersion pumps, sealless 50 Hz, open impellers p [psi] 64 H [m] Hz Merkmale Vertical multistage pump Delivery head 1) Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G1¼ Q [l/min] Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 250 l/min Delivery head H max Immersion depth t max 45 m 550 mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size 0 C bis 60 C 0 C bis 0 C max. Ø mm Contamination max. 1,5% (proportion by weight) Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" Splash ring material "P" PTFE graphite NBR Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
7 spandaupumpen.com Centrifugal pumps 7 25 Immersion pumps, sealless 50 Hz, open impellers k øm 30 a G1 ¼ t l Variation "V" with bottom for extension tube ø50 ø160 / 4xø7 ø140 b max. level of fluid min. level of fluid 50 ø140 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] Sonic Pressure pressure port [dba] (DIN ISO 22) /400 F 0,55 2,06/1, ,2 16, /400 J 1,5 4,95/2, ,0 27,5 59 G1¼ /400 J 1,5 4,95/2, ,5 29, /400 L 3,0 10,0/5, ,0 65
8 Centrifugal pumps spandaupumpen.com 25 Immersion pumps, sealless 60 Hz, open impellers p [psi] 64 H [m] Hz Merkmale Vertical multistage pump Delivery head 1) Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G1¼ Q [l/min] Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 250 l/min Delivery head H max Immersion depth t max 45 m 550 mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size 0 C bis 60 C 0 C bis 0 C max. Ø mm Contamination max. 1,5% (proportion by weight) Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" Splash ring material "P" PTFE graphite NBR Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
9 spandaupumpen.com Centrifugal pumps 9 25 Immersion pumps, sealless 60 Hz, open impellers k øm 30 a G1 ¼ t l Variation "V" with bottom for extension tube ø50 ø160 / 4xø7 ø140 b max. level of fluid min. level of fluid 50 ø140 Electrical data, dimensions and weights at 60 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] Sonic Pressure pressure port [dba] (DIN ISO 22) /460 F 0,55 1,75/1, ,2 16, /460 J 1,5 4,33/2, ,0 27,5 59 G1¼ /460 J 1,5 4,33/2, ,5 29, /460 L 3,0,65/5, ,0 65
10 10 Centrifugal pumps spandaupumpen.com 30, 40 Immersion pumps, sealless 50 Hz, open impellers p [psi] 32 H [m] Hz Merkmale Vertical multistage pump Delivery head 1) Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G1¼ Q [l/min] Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 400 l/min Delivery head H max Immersion depth t max 14 m 560 mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size 0 C bis 60 C 0 C bis 0 C max. Ø mm Contamination max. 1,5% (proportion by weight) Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" Splash ring material "P" PTFE graphite NBR Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
11 l spandaupumpen.com Centrifugal pumps 11 30, 40 Immersion pumps, sealless 50 Hz, open impellers øm Variation "V" with bottom for extension tube k ø50 t 30 a G1¼ ø160 / 4xø7 ø140 b max. level of fluid min. level of fluid 50 ø140 Electrical data, dimensions and weights at 50 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] Sonic Pressure pressure port [dba] (DIN ISO 22) /400 G 0,75 2,56/1, ,2 16, G1¼ /400 J 1,5 4,95/2, ,0 26,0 65
12 12 Centrifugal pumps spandaupumpen.com 30, 40 Immersion pumps, sealless 60 Hz, open impellers p [psi] 32 H [m] Hz Merkmale Vertical multistage pump Delivery head 1)) Connecting dimensions according to DIN EN For delivery of slightly contaminated types of fluids Installation direcly into the reservoir Pressure port is located above the reservoir plate and designed with internal thread G1¼ Q [l/min] Q [USgpm] Delivery rate 1) Technical data Mechanical design Variations Delivery rate Q max 400 l/min Delivery head H max Immersion depth t max 14 m 560 mm Kinematic viscosity max. 20 mm 2 /s Delivery temperature "P" "G" Grain size 0 C bis 60 C 0 C bis 0 C max. Ø mm Contamination max. 1,5% (proportion by weight) Direction of rotation anti-clockwise (as viewed looking down on the motor's ventilation side) Flange and steel Shaft Impeller Intermediate chamber Bushes Pumps bottom material "P" Splash ring material "P" PTFE graphite NBR Bottom with extension tube "V" Impeller material "G" Bottom standard design "G" Splash ring material "G" Fluids delivered Various industrial use fluids, emulsions, also with chemical additives, oils, water with corrosion protection additive, water colors, heat transfer oils 1) Data for viscosity of ~1 mm²/s at a density of ~1 kg/dm³. Minimum volumetric flow: 5 to 10 % of nominal delivery rate.
13 spandaupumpen.com Centrifugal pumps 13 l 30, 40 Immersion pumps, sealless 60 Hz, open impellers øm Variation "V" with bottom for extension tube k ø50 t 30 a G1¼ ø160 / 4xø7 ø140 b max. level of fluid min. level of fluid 50 ø140 Electrical data, dimensions and weights at 60 Hz Series Type of pump Frame size Stages Immersion depth t [mm] Voltage / Y U [V] Motor index Rated motor values Output P N [kw] Current / Y l N [A] Speed n N [min -1 ] Dimensions [mm] Øm k l Øa b Weight [kg] Sonic pressure [dba] Pressure port (DIN ISO 22) /460 G 0,75 2,27/1, ,2 bis 16, G1¼ /460 J 1,5 4,33/2, ,0 bis 26,
14 14 Centrifugal pumps spandaupumpen.com Immersion pumps, sealless Order key Series Frame size P M S To determine the fram size the corresponding characteristics has to be used. 05, 06, 0, 10, 25, 30, 40 Stages To determine the desired number of stages the corresponding characteristics has to be used. 01 = 1-stage = 4-stages s P = plastic (Standard) G = gray cast iron Seal B = gap bush Pump design S = standard design V = bottom for extension tube Immersion depth in mm To determine the desired immersion depth the appropriate table "Electrical data, dimensions and weights" has to be used. 90 = 90 mm = 560 mm Motor index To determine the desired motor index the appropriate table "Electrical data, dimensions and weights" has to be used. Example: H = 1,1 kw Power supply 01 = 230 /400 V at 50 Hz 265 /460 V at 60 Hz 05 = Standard für Europa 230/400 V at 50 Hz... further designs on request Motor design AA = standard up to 0,55 kw (insulation class F, IP 54, 2-pole) BA = standard from 0,75 kw (insulation class F, IP 54, 2-pole, IE2)... further designs on request Order example: 4001GBS20J01BA Series:, Frame size: 40, 01-stage, : G grey cast iron, Seal: B gap bush, Pump design: S standard design, Immersion depth: 20 mm, Motor index: J 1,5 kw, Power supply: /400 V at 50 Hz, 265/460 V at 60 Hz, Motor design: BA Standard (IE2) * All data and measurements refer to the IE2-motors.
15 Notes
16 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless our written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication, but no liability can be accepted for any loss or damage whether direct, indirect or consequential, arising out of use of the information contained herein. SKF Lubrication Systems Germany GmbH Product department Spandau Pumps Motzener Strasse 35/ Berlin Germany PF Berlin Germany Tel. +49 (0) Fax +49 (0) SpandauPumpen@skf.com This brochure was presented by: EN 11/2015 Subject to change without notice.
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
In addition to the basic models, it is also possible for the units to be outfitted with add-ons.
1-1202-EN Gear ump Units For single-line centralized lubrication systems MFE5-KW3-2 MFE5-KW6 MFE5-BW7 These units comprising the MFE Group are designed to supply the lubricant used in intermittently operated,
The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
Construction of the Gear Pump KF
Transfer Gear Pumps Construction of the Gear Pump KF Plain Bearing Bush Driving Gear Flange Mounting Cover Outboard Bearing End Cover Drive Shaft End Shaft End Seal Housing Driven Shaft Pinion Product
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
VM, VMC, VMN. Vertical Multistage Centrifugal Pump, 60Hz
VM, VMC, VMN Vertical Multistage Centrifugal Pump, 60Hz Approvals CERTIFICATE IQNet and SQS hereby certify that the organisation Swiss Pump Company AG 3645 Thun-Gwatt Switzerland Whole Company Design,
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
Vacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
Single- and Multi-circuit Pumps
Single- and Multi-circuit Pumps for Circulating and Hydrostatic Lubrication as Gear and Vane Pump Units, Reservoir Units Gear pump unit Multi-circuit pump The pump units specified in this leaflet are lubricant
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
Pressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
Max. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Transfer Gear Pumps KF 4... 80
Transfer Gear Pumps K 4... Contents Technical data Dimension sheets Page Contents Page Contents.......................... 2 Applications........................ 2 Descriptions....................... 3
Radial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
BASIS RANGE TMB SERIES
BASIS RANGE SERIES magnetic driven pumps BASIS The pumps belong to Argal s BASIS range and feature, single stage, centrifugal impeller and magnetic drive. The range of pumps includes five models to deliver
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
Heating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
Series description: Wilo-Yonos MAXO
16 88 / Series description: Wilo-Yonos MAXO /,5-1 1 Wilo-Yonos MAXO 1 5/,5-1 8 6 /,5-5/3/,5-7 5/3/,5-1 /5/,5-8 65/,5-9 5/,5-9 5/3/,5-1 5 1 15 5 Design Glandless circulation pump with threaded connection
MHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]
![1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]](/thumbs/40/20910486.jpg "1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]")
Product review: Range: Wilo-Star....... Star F Star Star Star F Star Star FX [m /h] Wilo-Star Cast iron body Hz [US gpm].......... [m /h] Wilo-Star Bronze body 9 Hz [US gpm] Star Star Star Star Star BF
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
New. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics ViFlow Finland Oy Kauppakartanontie 7 A 1 00930 Helsinki, Finland tel. +358 40 178 0920 fax +358 9 4789 2800 viflow@viflow.fi www.viflow.fi
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
Series description: Wilo-Yonos MAXO-D
ATAC Solutions LTD / 1 / Series description: 1 /,5-1 1 5/,5-1 3/,5-7 3 3 5/ /, / 11 5-,5-,5-9 Design Glandless circulation pump with threaded connection or flange connection, EC motor with automatic power
Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL.
Twin- Impeller Centrifugal Electric Pumps CA-CA(N) Series Standard supplied IE2 motors are compliant with Regulation (EC) no. 640/2009. MARKET SECTORS CIVIL, AGRICULTURAL, INDUSTRIAL. APPLICATIONS Version
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
VDL 53 - Vacuum drying oven for flammable solvents
Vacuum drying ovens VDL 53 - Vacuum drying oven for flammable solvents The VDL series ensures maximum safety when drying organic solvents in accordance with TÜV/GS guidelines. The interior chamber is designed
Rules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 5 Pumps 1 Guidelines for the Design, Construction and Testing of Pumps Edition 2007 The following Guidelines come into force
sealed close coupled pumps
sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
Overflow valve with thread connection
Operation Installation and Maintenance Instructions Overflow valve with thread connection hp-technik GmbH Industriepumpen-Förderaggregate und Anlagenbau Gablonzer Straße 21 D-76185 Karlsruhe Germany Tel.:
Specials. www.ika-apparatuur.nl. designed. 3rd edition 2015 English. for scientists 1
Specials www.ika-apparatuur.nl 3rd edition 2015 English designed for scientists 1 IKA Specials Quarterly Campaign III Three is a charm With over 100 years of experience, IKA continues to strive for delivering
ATL Fuel Level Sender Probes
T E C H N I C A L S P E C I F I C A T I O N The ATL EL-AD-151 (Resistance Output) and EL-AD-152 (Voltage Output) Fuel Level Senders are highly advanced sensors for continuously measuring the contents of
Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400. Industrial Filters Accumulators. Filters for inline installation for continuous operation
Industrial Filters Accumulators Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400 Filters for inline installation for continuous operation With integrated pressure equalisation valve Optimised flow
Bypass level indicator With magnetic display Model BNA
Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT
HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT MAXIMATOR GmbH 2 MAXIMATOR has an extensive know-how concerning concept, development, construction and manufacturing of test benches and
Alarm Group in SKF @ptitude Observer 9.1
Application Note Alarm Group in SKF @ptitude Observer 9.1 Introduction An alarm group can be created if a user wishes to collect data from other measurement points. When an alarm is raised, the measurement
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Incubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
Output torques up to 8000 Nm. General features. Protection. External coating. Working temperature range
Type series booklet 8521.15/2--10 ACTELEC 31 to 800 (BERNARD) 1/4 turn electric actuators (irreversible reducer with multi -turn electric actuator ACTELEC 31: screw -nut kinematics ACTELEC 200 to 800:
www.kem-kueppers.com info@kem-kueppers.com
www.kem-kueppers.com info@kem-kueppers.com Calibration of flow meters according to DIN EN ISO/IEC 17025:2005 Introduction... 2 Calibration laboratory... 3 Description of the calibration process... 3 Calibration
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
Inline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
A E R Z E N E R M A S C H I N E N F A B R I K G M B H AERZEN POSITIVE DISPLACEMENT BLOWERS. for conveying of air and neutral gases for high vacuum
AERZEN POSITIVE DISPLACEMENT BLOWERS for conveying of air and neutral gases for high vacuum A E R Z E N E R M A S C H I N E N F A B R I K G M B H G1-090 01 EN 1000 6.2005 Customers benefit due to technical
Pressure regulating valve with modulating kit, type DRV
Operation Installation and Maintenance Instructions Pressure regulating valve with modulating kit, type DRV hp-technik GmbH Industriepumpen-Förderaggregate und Anlagenbau Gablonzer Straße 21 D-76185 Karlsruhe
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
PUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
Duplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
Material test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
SKF Seals Knowledge Engineering. Designed to optimize machinery performance
SKF Seals Knowledge Engineering Designed to optimize machinery performance From moulding high quantities to mach Sealing for power transmission The performance and service life of a power transmission
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
Vertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
Rickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
SIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
Hydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
Operataing Manual. Single stage radial Fan. Model MKV/TKV
01.2011 Operataing Manual Single stage radial Fan Model MKV/TKV REITZ-SCHWEIZ VENTILATOR AG Zentweg 11 CH-3006 Bern Telefon +41 (0) 31 / 938 85-85 Telefax +41 (0) 31 / 938 85-86 Internet: www.reitz-schweiz.ch
Return line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the