ViewRanger Outdoors GPS Instructions Version 3.3.3, December 2012

Transcription

1 ViewRanger Outdoors GPS Instructions Version 3.3.3, December 2012 Contents Supported Devices... 3 ViewRanger Outdoors GPS Editions in itunes...3 ipad & iphone... 3 Using ViewRanger... 4 Account & license... 4 Map Interaction... 4 Retina Display... 5 Map Screen... 6 Buttons... 8 Menu... 9 Coordinate Entry... 9 GPS... 9 GPS Mode Tracks Track Control Track settings Status Icons Compass Compass showing facing direction...12 Auto Rotate Map and Compass...12 Routes Tracks & Routes Graphs...13 Trip View Audio and Video Content...14 Organizer Settings Point of Interest POI...16 Routes, Tracks and POIs Data Sets...16 My POIs, Routes, Tracks...16 Search for routes Place Name Search Map List Closing ViewRanger App...19 Maps Premium maps Open maps Unlimited maps Premium Maps Initial Overview Map...20 Initial Download Credit...20 Downloading Premium Map Tiles...21 Managing Map Tiles...22 Open Maps Online Map Settings...24 Upgrading to Premium & Unlimited Maps...24 Unlimited Maps Create saved map (for Open & Unlimited Maps)...25 Map settings Night Vision Mode...26 ViewRanger store Purchasing Maps

2 In App Purchase (using itunes account)...27 In App Purchase (using credit)...28 In App Purchase Troubleshooting...28 Backing up Maps Installing Maps and Copying Files...28 Import / Export Files Dropbox itunes File Sharing Interface for Installing Maps...30 GPX Support Buddy Beacon Buddy watch / track Buddy list...33 Buddy Beacon Add Buddy...33 Buddy Watch Country Change...33 Buddy Beacon Web Page...33 Retrieva Dog Collar My.ViewRanger.com Route Planning & Sharing...34 Synchronize Navigation Map Display While Navigating...35 Alarms Choosing the alarm tone...36 Sound and Video Links...36 Route Navigation Settings Navigation Commands...37 Following a route...38 Detail of what happens as you reach the waypoint...39 Going off route Route Navigation Troubleshooting...40 Manual Route Navigation...40 Support Appendix Wifi Web Interface...41 Troubleshooting...41 Web Form

3 Supported Devices ViewRanger runs on both the iphone and the ipad running ios 4.3 or above. To obtain a position fix, Assisted GPS location service is required. ViewRanger Outdoors GPS Editions in itunes ViewRanger Outdoors GPS can be bought and installed from the Apple app store. Three editions are available. The software is the same but the bundled content is different: Open includes access to Open Street and Cycle mapping. Premium as well as access to Open Street and Cycle mapping, includes 1000 credits with which to download premium mapping of 13 different countries (or 600 sq km of Norway). USA - includes access to Unlimited Online maps of USA and Open Street and Cycle mapping as well as 240 credits with which to download premium routes. Only available in USA itunes. You can buy premium mapping within the app using either Open or Premium edition and upgrade to Unlimited mapping. This can be done using Organizer ViewRange store. You can also use maps that you bought for ViewRanger on other types of phone in both editions. ipad & iphone ViewRanger runs on both the iphone and the ipad. Where we refer to the iphone, the same applies to the ipad. The ipad has a split screen where the Organizer occupies the left of the screen, the map occupies the rest. 3

4 Using ViewRanger When you start ViewRanger you'll be prompted to choose a default country. Select one then an overview map will be downloaded then displayed. The Open Maps edition will show an Open Street map of the world. More maps can be purchased in-app using Organizer store. ViewRanger Account & license You will be prompted to create or sign into your account. The account section allows you to create and manage your ViewRanger server account. This keeps track of your map purchases, and is used to support features such as the buddy beacon. The Account & licence section can be found under using Organizer Settings. You can create a new account; enter the details of an existing account or test the account with account sign in; change your password; or request a new password be ed to you. The license section allows you to activate maps you already own, having bought for another phone or from a retailer. Map Interaction To pan around the map drag it with your finger. You can zoom in and out of the map by pinching or using the zoom buttons. You can also zoom in by double tapping, and zoom out by doing a single two finger tap. As you zoom in and out ViewRanger will change the scale of map displayed to best match the current zoom. Map view includes fixed visible cross-hair at the centre of the screen, together with numeric coordinate on display and an on-screen map scale bar. 4

5 Retina Display The retina display control for premium maps can be found under Organizer Settings > Map settings, Magnification and for Online maps Organizer Settings > Online maps, Magnification. Default magnification for Premium maps is 100% and 200% for Online maps as the labels on Online maps are too small to read at retina size. When the slider is set to 100% this is retina size. First screen grab shows 200% magnification, second 100%. Red square for illustration. Magnification is not available on ipad, ipad 2 or iphone 3 / 3GS. It is on ipad 3 and iphone 4*. 5

6 Map Screen 1. Location bar: Showing coordinates and status icons. Tap to enter manual coordinates. 2. Selection text: Displays name of currently selected object. 3. Selection highlight: A red box is drawn around the selected object, in this case a POI (Point Of Interest), indicated by the gold dot. 4. Offset handle: Use the offset handle to move a POI or a Route waypoint. If you need to modify its position then press and drag this button. If the POI/Waypoint is locked, then the handle will not be displayed. 5. Navigation target range circles: Outer circle indicates where Arrival Alarm would sound. Inner circle indicates where next target would be selected (if following a route). 6. Navigation hint: A dotted line is drawn between current position and next navigation target. 7. Heading arrow: When you are moving a red arrow will be drawn showing your heading, with its length is proportional to speed. 8. GPS Crosshair: The current position. Red indicates an accurate GPS fix. Grey indicates an out-of-date or inaccurate position (check titlebar position text for further information). 9. Navigation arrow: Points to next Navigation target. Tap to access Navigation menu options. 10. Route: A route is a list of waypoints, which mark out a planned trip. It is blue when not selected and red when selected. 11. Scale bar: Dynamically drawn scale bar based on current map zoom level. 12. Organizer: Is where you manage your maps, routes, tracks and points-of-interest. You can also access settings and help. The ViewRanger store can be used to download both free and paid for maps and other content. 13. Menu: This button shows a context sensitive menu, which contains things you can do in the map window. With nothing selected it allows you to create a point-of-interest or a route; to search for routes; or download a map tile. If you select a point, route or track it contains commands that apply to the selected item such as Details (which shows a description of the item) and edit commands. 6

7 14. GPS button: Starts using the GPS. It moves the map to be centred on your GPS location. The map will follow your GPS location. If you move the map using the screen the map will stop moving with the GPS location, but the GPS location will still move across the map. In this example image, the compass is also displayed. 15. Zoom: Use the Zoom in button to zoom in on the centre of the map, or where you last selected. You can also zoom in by stretching (reverse pinch), or by double tapping. The Zoom out button zooms out to show more of the map. It may also change map scale. You can also zoom out by pinching or by doing a single two finger tap. 16. Home: The phones home button put the app into background and keeps GPS on and recording the track. 17. Track: A track records a walk or ride, it's a list of points and times linked by a black line. 7

8 Buttons There are buttons at the bottom of the map screen and buttons that appear in context. They may disappear after a short time, tap the screen and they reappear. The buttons are: The Organizer is where you manage your maps, routes, tracks and points-of-interest. You can also access settings and help. The ViewRanger store can be used to download both free and paid for maps and other content. The Menu button shows a context sensitive menu, which contains things you can do in the map window. With nothing selected it allows you to create a point-of-interest or a route; to search for routes; or download a map tile. If you select a point, route or track it contains commands that apply to the selected item such as Details (which shows a description of the item) and edit commands. The GPS button starts using the GPS. It moves the map to be centred on your GPS location. The map will follow your GPS location. If you move the map using the screen the map will stop moving with the GPS location, but the GPS location will still move across the map. Use the Zoom in button to zoom in on the centre of the map, or where you last selected. You can also zoom in by stretching (reverse pinch), or by double tapping. The Zoom out button zooms out to show more of the map. It may also change map scale. You can also zoom out by pinching or by doing a single two finger tap. The Done / Complete button is shown while you are creating or editing a route or point-of-interest. Press the Done button to return to the normal mode. The Delete button is shown while creating a route. This button deletes the last waypoint you placed, and can be used repeatedly. Add waypoints when creating a route, you can toggle between panning the map and adding waypoints. This button switches to adding waypoints. Pan map - when creating a route, you can toggle between panning the map and adding waypoints. This button switches to panning the map. Handle Select a POI or a Route waypoint. If you need to modify its position then press and drag this button image. If the POI/Waypoint is locked, then this image will not be displayed. 8

9 Menu The Menu button shows a list of commands. The commands listed vary according to what you are doing and what is selected. If nothing is selected then you can choose to create a route or POI, record a track. When an object is selected the boarder of the menu icon turns red. Coordinate Entry To enter coordinates manually, press the top location bar that displays the current map location coordinates. Tapping on the active coordinate type displays a selection list of coordinate types Note: If a particular coordinate type is greyed-out then it cannot be used in the active country. When creating a POI or a Route Waypoint, you can use to specify the coordinates manually. button option To modify the location of existing POI(s) and Waypoint(s), use the Properties view and the Set position option. GPS Press the GPS button to start using the GPS. The map will jump to be centred on the current GPS location. A circle and cross are shown to indicate the GPS location, which is red when the GPS is giving an accurate position, and grey when the GPS position is not accurate. The map will move with the GPS location, keeping the GPS indicator central. If you pan the map by dragging it, the GPS lock will be disengaged. The GPS position will still be shown and recorded. To re-engage the GPS lock press the GPS button again. The GPS can be disconnected by pressing the Menu button using the switch in settings or by closing the app. and choosing Disconnect GPS, When you are moving an arrow will be drawn showing your heading, with its length is proportional to speed. Control this in settings. Map auto rotate can be switched on in settings. This rotates the map by multiples of 90 degrees, to best match your heading. 9

10 GPS Mode Switch between continuous and power save. If you are making a longer trip and you need to maximize the battery life, switch to Power save. The battery will last around 60% longer with the default settings, though track points will be spaced a bit further apart, every 1 minute. For shorter journeys, or where you need more detailed tracks, switch back to Continuous. If you are navigating - following a route or navigating to a point - then power save can't be used. There are some more settings, which you can adjust to further reduce battery consumption: Continuous - where the GPS is in continual use, giving the most detailed tracks but using the most power. Power save - with power save enabled, ViewRanger uses the GPS intermittently, saving power but giving a less detailed track. Interval - the interval slide controls how often ViewRanger gets a position fix. When set to 2 minutes, it will only get a position fix every 2 minutes. It will stop using the GPS between. Stop/start - between making fixes, ViewRanger will completely stop using the GPS. For longer intervals this saves the most power, but for intervals under 5 minutes it saves less power than Hi/Lo. Hi/Lo - between making fixes, the GPS switches to a low accuracy mode.though this uses a little power, the advantage is that it is faster to make a position fix when the app resumes. For intervals under 5 minutes this uses the least power. GPS Auto Disconnect If the GPS is no longer needed, and the screen is locked or another app is in the foreground, ViewRanger will disconnect the GPS after a time interval. This slider controls how long the interval is. You can switch auto disconnect off by moving the slider to zero, then the GPS will not auto disconnect. If you are recording a track, sending the beacon, following a route or navigating to a point, the GPS is needed so will not be auto disconnected. GPS Single Fix If you are on a long trip without a power source and just want to check your position using the least possible power, enable the GPS Single Fix option. When this is enabled, then after pressing the GPS button on the map, the app will get a position fix then disconnect the GPS. 10

11 Tracks A track records a walk or ride, it's a list of points and times. By default ViewRanger records a track whenever the GPS is connected, but you can stop this by pressing the Menu button and choosing 'Stop record track', or using the Track Control in the track list, or using Settings. The track is drawn as a black line (red when selected) with regular arrow markings. The arrows are spaced every 5 minutes. If it has been less than 60 minutes since the last track was being recorded, ViewRanger will ask if you wish to create a new track or extend current track. If it has been more than 60 minutes since the last track was being recorded, ViewRanger will hide that previous track and start a new one. All the values mentioned above can be controlled in Track Settings. Track Control When you select Organizer Here you can: Tracks, you now see the track controller. Start a track recording by pressing the red record button Pause a track that is recording by pressing the pause button Reset to create a new track by tapping New Start the BuddyBeacon sending by pressing the transmit button See how long your have been going and far you have been Set the type of track - for example 'Hike' or 'Off Road Bike' - this sets its icon both in the app and on the web site Upload the track to by pressing upload See all your tracks by pressing 'track list'. Change track recording settings press Track settings. Track settings Record track switch recording a track on and off. Note that the GPS must also be connected for the track to be recording. Track minimum distance the minimum spacing between track sample points. If set to 20m, a point will only be added to the track when you are 20m or more away from the previous point. Small values lead to a detailed track, big values to a less detailed track. Avoid values that are too small as they record all the natural GPS fluctuation, and avoid large values as they lead to missed corners. Track minimum time the minimum time between samples. If set to 10 seconds a point will only be added if it has been 10 seconds or more since the last sample. Track split time used when you start recording a track, this settings is used to decide whether to start a brand new track or extend the last one. At the default value of 60 minutes, if it has been 60 minutes or less since the last track was recorded, ViewRanger will extend that track. If it has been more than 60 minutes it will start a new track. Track mark time regularly space arrows are drawn along the track. This setting controls how far apart they are, the default is 5 minutes. Slide the slider to zero to switch them off. 11

12 Status Icons 3 status icons are shown in the coordinate location bar at the top of the screen. GPS the satellite dish icon indicates ViewRanger is using the GPS. If the icon is flashing the GPS does not have an accurate position fix. If the icon is solid the GPS fix is accurate Track the footstpes icon indicates whether a track is being recorded. Beacon the circles and red arrow indicate the buddy beacon is transmitting, receiving or both. Compass If your iphone contains an electronic compass, you can see the compass displayed in two ways. Compass showing north The compass can show the direction that is north. It shows this using a red arrow on the GPS button. To switch on this type of compass go to Organizer Settings > Map settings and switch on Compass. The arrow points north, so you can use it like a clip on compass to orient yourself and the map. When the arrow is pointing straight up the map is aligned with the real world. If the compass arrow goes grey it means the compass reading is not accurate. Move away from any metal or electrical equipment. Compass showing facing direction The compass can show on the map the direction you are facing. It does this by drawing an arrow on the outside of the GPS location circle. If the arrow points east, it means the phone is pointing east. To switch on this type of compass go to Organizer > Settings > Map settings and switch on HUD Compass. (HUD stands for heads up display.) The arrow should be red. If the arrow goes grey it means the compass reading is not accurate. Move away from any metal or electrical equipment. Auto Rotate Map and Compass If the map is set to auto rotate (Organizer Settings > Map settings), then as long as one or other compass is switched on the map will rotate by multiples of 90 degrees to best match the compass direction. 12

13 Routes A route is a list of waypoints, which mark out a planned trip. To create a route press the Menu button then 'Create route'. As you tap the screen a waypoint is added to the route, which you can drag to where it is needed. If you tap on the last placed waypoint you can move it, otherwise the next tap adds another waypoint. Press the handle button to select and position waypoints. To delete the last waypoint press the Delete button repeatedly.. You can use this When the route is complete press the Done button. If you need to pan the map without dropping a point, press the Pan map button. You can then move the map as normal. To return to creating waypoints press the Add waypoint button. While a route is selected its name and length is shown at the top of the screen. If a waypoint is selected its name is shown too. The handle button is offset from the route to allow you to position waypoints without obscuring the route with the tip of your finger. Tracks & Routes Graphs Altitude, distance, speed and GPS altitude graphs are available for your tracks and routes. To see a graph, select a route or track from the list and go into its Details. The graphs can be accessed using the buttons at the bottom of the details view. Altitude - shows calculated altitude against time (for tracks) or distance (routes). Only available if you have altitude data installed. GPS altitude - shows the altitude reported by the GPS for tracks. Distance - shows distance travelled against time, for tracks. Speed - shows speed against time for tracks. Vertical red line indicates your progress along the route. 13

14 Trip View Trip view can be found in Organizer. When you start to record a new track the trip data starts at zero. A graphical Trip view / sports GPS allows you to see a range of statistics presented as numbers, graphs or dials. Several categories of data are available: Speed, Distance and Times Height and Altitude, both from GPS or height data(vrh file) Navigation related information GPS Accuracy Utility dial displays such as a compass, navigation arrow and a pace speed monitor You can configure multiple trip pages or profiles. Each profile can have a different layout. Within the chosen layout, the user can setup variables and view them in number, text, graph or dial format. You can edit a profile layout type, by using the trip view settings. Select the edit button, located on the trip view tool bar. You can add new profile pages to the trip view using the add button. Swipe the screen to move from one profile page to another. Press and hold on a box to change the variable type displayed. A range of numeric and text variables can be selected and viewed. Specific variables can be viewed graphically using graph or dial representations. Audio and Video Content Some routes and waypoints have links to audio or video content, you can also add your own links to any description. To play the video or audio simply tap on the link in the Details view. If the content is video then it will be played using the iphone's video player. Press Back to return to ViewRanger. If the content is audio it will be played within ViewRanger. A row of controls is shown. You can interact with ViewRanger as normal, for example return to the map view. The controls provided are: Stop stops playing and closes the controls. Restart go back to the beginning. Step back / forward step backward or forward a couple of seconds, press repeatedly for for jumps. Pause / play pause the playing or resume where it was paused. 14

15 If you are following a route, or navigating to a point, and have alarms enabled then the sound or video will be automatically triggered when you reach the point. See the following navigation section for details. Organizer The Organizer holds a number of lists, the ViewRanger Store, Settings and Help. Settings The Settings page can be accessed within Organizer. Show overlay switches the overlay (POIs, routes and tracks) display on and off. Switch off the overlay to see the map on its own. Account & license use this section to create and manage your ViewRanger server account, and to activate new maps. App Store restore itunes specific functionality to re-download purchased map products. This does not apply to token products, map tiles or routes. GPS settings - enable GPS mode for Power save. 15

16 Track settings this section controls the recording and display of tracks. Navigation - setup alarms and distances specific to both these features. Refer to the navigation section of help for more info. Map settings this section contains other map and interface related settings. Online maps allows user to control map cache size and when to clear old maps. Point of Interest POI A point of interest, POI, is a single point marked on the map. To create a POI press the Menu button and choose 'Create POI'. Then tap the screen and drag to place the POI. When happy with its position press the Done button. Routes, Tracks and POIs Data Sets Routes, tracks and points of interest created when viewing online maps are separate to those used for premium maps (except for USA maps, where they are the same). So for example, a route or POI set shown on a premium map, won't be visible on the online map and vice versa. This is because the two maps use different coordinate spaces. We will remove this restriction in a future release. Also note that if you swap between online and non-online maps while recording a track, the track will be split into parts and the whole won't be visible (Note: You can move routes, tracks and POIs between the maps by saving them to a GPX file, swapping to the other type of map, then re-importing the GPX file). My POIs, Routes, Tracks The My POIs, Routes and Tracks sections list all the items of that type for the current map country you are viewing in the app. Details shows the description of the item and some statistics. View on map show the item on the map, panning and zooming as necessary. Properties edit the item. For example, change its name, icon, colour or line width. Delete delete the item permanently. Export item to GPX create a new GPX file containing this item. That can then be copied off the phone using the wifi interface for use elsewhere. Hide hide the item, so it is not shown on the map. Waypoints for a route list the points in the route, each of which in turn has its own control section. Edit All If you need to delete, show or hide all the items in a folder, tap the All button at the top, then tap the appropriate button. Unlock / Lock All If you need to lock or unlock all the items in a folder, to dis-allow or allow editing, tap the All button at the top, then tap the appropriate button. 16

17 Search for routes The Routes list has a search for routes section, from where you can look for routes stored on the ViewRanger server. You can enter some text to search for routes that include that text. Or can search for routes around the current map location. You'll see a list of routes. Tap on one to see its description. Some routes are free, others have a price. If you'd like to download a route press the Download button at the top right of the Details screen, or at the bottom. You can also search for routes using the map view's Menu button, and see the results on the map. In the map view press the Menu button and choose 'Search for routes'. A number of icons will appear showing route start points. Select one by tapping on it. Its name appears at the top of the screen. To see its details press the Menu button and select Details. Once downloaded you see all the waypoints. For most routes each waypoint has a description and photo too. Select a waypoint, press the menu button and choose details to see the description. 17

18 Place Name Search You can search for place names and post / zip codes. Tap Organizer Search to show the search panel. Enter some text to search for, or choose one of your recent searches from the list shown. If you are searching the local gazetteer you only need to enter the first few letters - so "cam" will find "camden" and "cambridge". When ready press the search button. A list of results will appear. Tap on one to see it on the map. ViewRanger gazetteer files download automatically upon first search event. ViewRanger will also search online using a search service. Post and zip code search is only available through the online service. To get back to the search results use Organizer Search and tap the search field. To clear the search results use the Clear button on the results screen. Only the first 250 results are shown. If you don't see the result you want, repeat the search with a longer search text. Map List The Maps section of the Organizer lists all your maps, grouped by country. You can upgrade to any type of map from the Open and Premium versions. If you select a map you can see a summary of its details. Press View to see the map in the map view. Press Delete to delete the map. Use this list to change country. 18

19 Closing ViewRanger App When you hide the ViewRanger application on an iphone that supports multi-tasking by pressing the home button, this does not close the application, but puts it into background where it will continue to run and remain active. This means, if you are recording a track, it will continue to record the track and keep the GPS connected. To close the ViewRanger application completely, first press the home button to put ViewRanger into the background. Then double press the home button which brings up the tasks bar. Now long press the ViewRanger icon and a stop sign icon will be displayed on the ViewRanger icon. Press the red stop sign icon to close the ViewRanger application. You can then close the tasks bar by clicking the home button a couple of times. Beware long pressing on the normal application start icon if a black cross appears that will delete the application and maps. Only long press in the task list, and only press the red stop sign icon. Maps ViewRanger supports multiple types of map. You can upgrade to any of the types of map from the ViewRanger Open and Premium editions. Premium maps ViewRanger Outdoors GPS (Premium) edition comes with Open maps and the more detailed premium maps, typically from national mapping agencies such as Ordnance Survey, IGN, BKG or from National Geographic. These maps contain more detail but are charged for. You choose which tiles to download and will be prompted to buy top-up credit when needed. These maps are stored on the phone so can be used when away from the mobile network. Open maps ViewRanger Outdoors GPS (Open) edition come with Open Street and Cycle Map. These maps are downloaded automatically as and when they are needed. They are cached on the phone, so if you preview them before going out you can use them in an area with no mobile signal. You can also save a pre-selected area of online map automatically. Unlimited maps ViewRanger Outdoors GPS (USA) edition come with highly detailed topo maps for the contiguous USA and Hawaii and Canada, online mapping that can be easily stored for offline usage on your mobile devices. USA Maps gives you a choice of map views; standard topo or shaded land use and you get 250,000 miles of public land trails marked on the maps, many named and fully searchable. The Canada maps are sourced from Natural Resources Canada (NRCan). The map data offers a range of zoomable layers from national overview, road map level down to 1:50,000 topographic. 19

20 Premium Maps Initial Overview Map When you first start the Premium version of ViewRanger it will ask you to download an overview map. Tap on a country and an overview map will download. You can download more maps using the ViewRanger Store. Initial Download Credit The Premium version of ViewRanger is bundled with a token's worth of credit. You can use this token for one of the following: 1000 credits for maps of supported countries (except Norway) and routes, or 600 sq km of Norway maps. When you try to download something that is charged for, you'll be asked to confirm you'd like to allocate your credit to that type of item. 20

21 Downloading Premium Map Tiles To download detailed map tiles tap go into Organizer, then ViewRanger Store, then your country, and tap on one of the grid items. Alternatively from the map view press the Menu button and choose Show map download grid, then select a scale. You'll be transferred to the map view with the download grid shown. Red tiles have not been downloaded to the phone, green tiles have. To download a tile tap a square so its border is bold red, then press the second button (context menu) and choose Download map tile here. Once the tile is downloaded its square will go green zoom in to see the map. To download all the map tiles currently on screen with a solid border press the menu button and choose Download area. If too many tiles are on screen the server may tell you the area is too large in that case zoom in to download fewer tiles. If you choose Options Auto download on, then ViewRanger will automatically download map tiles as you pan around the screen. It requests tiles where you don't already have a map. When auto download is on ViewRanger only downloads tiles for the map scale you are currently viewing. Press the stop icon to stop auto download. If the free overview map is not detailed enough then we recommend you download some intermediate detail tiles. For example, in France download a tile or two of 1:1,000,000 map, before trying to download 1:25,000 scale maps. To leave download mode press the context menu button and choose Hide download grid. 21

22 Managing Map Tiles Over time your map tile list can get quite long with lots of tiles. To combine tiles into single maps, go to Organizer Maps. Tap on a map tile and then tap Optimise tiles in the top left. You'll see a progress bar as map tiles close to this one are combined into a single map. 22

23 Open Maps ViewRanger can display free online mapping from Open Street Map and Open Cycle Map. The maps are downloaded automatically as they are needed and are then cached on the phone. If the mobile network is not available, or if you choose to work offline, then ViewRanger will display as much of the map as it can using the cached tiles. You can pre-save an area of Online map using the Create saved map feature. Choose Organizer, Maps then select Online maps. You will be presented with a list of online map sources to select from. (If you do not see the list of Online maps, go first to Organizer > ViewRanger store, allow the list to update, then go back to Maps.) To use the maps simply pan and zoom, map tiles are downloaded as you need them. Here are some samples: Maps in screen grabs 2010 Cloudmade or Open Cycle Map. Map data CCBYSA OpenStreetMap.org contributors. Terms of Use 23

24 Online Map Settings Choose Organiser, select Settings and then Online maps. Backup includes online maps by default, online maps are not included in an itunes backup. If you want them included set this switch to ON. Online when switched on, ViewRanger downloads map tiles as they are needed using the wifi or mobile internet connection. When switched off, ViewRanger will only display maps that are already found within the Map cache. Map cache size - set the size in (MB) of the downloaded map cache. This is the maximum space the cached map tiles can use. Once the cache is filled the oldest tiles will be deleted to make space. Clear tiles and Clear map cache - used to explicitly clear the map cache when required. Maps older than the specified number of days will be erased. (Note: this operation cannot be undone.) Upgrading to Premium & Unlimited Maps You can purchase premium maps, such as Ordnance Survey, and Unlimited USA and Canada maps with Organizer, ViewRanger store. 24

25 Unlimited Maps Unlimited online topographic mapping is now available for USA and Canada. These are included with the USA edition and for other versions must be purchased and activated before use. Choose Menu button, Organizer > Maps then select Online maps. You will be presented with a list of online map sources to select from. To use the maps simply pan and zoom, map tiles are downloaded as you need them. You can pre-save an area of Unlimited online map, for later use offline, using the Create saved map feature. View maps offline? - Choose Menu button, Organizer Settings > Online maps. Set Online to OFF. ViewRanger will now display as much of the Unlimited map as it can using the saved maps you have created. Create saved map (for Open & Unlimited Maps) Online maps are streamed from the Internet and saved onto the device. Online maps can be saved as user defined areas at the required zoom layer levels. Once created, they can be accessed from the My saved maps. To activate map selection, choose the Create saved map option from the Menu. The grid will enable you to choose single tiles or multiple tiles by dragging an area on the screen. Once you are satisfied with the selection then press the green-tick button. This will download and save the map area for later off line use. Map settings Auto scale as you zoom in and out, ViewRanger changes the scale of the map displayed to best suite the the zoom. For example, you may be viewing 1:50,000 map at 50%. Zoom in once and see 1:50,000 at 100%, then zoom in again to see 1:25,000 map at 50%, then again to see it at 100%. This switch stops the auto scale change. Auto rotate map if this is switched on, then as you walk the map will rotate to keep you heading up the screen. The rotation is in multiples of 90 degrees, so your heading won't be straight up. Unit type select the units used for lengths. Choose been metric (metres and km), imperial (feet, yards and miles) and nautical. Coordinate type the format used to display coordinates. You can choose various national grid coordinates (full digit, 10 digit, 8 digit and 6 digit), UTM or various longitude and latitude formats. Proximity screen switch controls whether the screen is locked when the earpiece is covered. A useful way to lock the screen if you put the iphone in and out of your pocket. Compass if you phone contains a compass, display the compass north arrow on the GPS button. 25

26 HUD Compass if your phone contains a compass, display the direction the phone is pointing on the map, as an arrow on the outside of the GPS location circle. Night Vision Mode Night vision draws the display in red to minimize loss of eyesight adaptation to the dark. This has been particularly requested by search and rescue teams. Switch this option on and off using Organizer Settings, Map settings, Night vision. ViewRanger store Purchasing Maps The ViewRanger Store section of the Organizer and other content. is where you can download additional maps To download a map go to Organizer, then ViewRanger Store. When the country list appears go into your chosen country. Tap on an overview map, e.g. Miniscale for GB. Then press Download. You'll see a progress panel. Once the map has downloaded press View to see the map. 26

27 In App Purchase (using itunes account) Some items in the ViewRanger store have a price displayed. They can be bought within ViewRanger using your itunes account. Select the item, then scroll down and press Download. You'll be asked to confirm the purchase. If you press Buy you'll be asked to login to itunes or re-enter your password. Once you;ve done this the map will download. If the download is interrupted, then you can restart it either by pressing Download again, in which case you'll be told you already own it. Or you can go to Pending purchases list. 27

28 In App Purchase (using credit) Map tiles are paid for using ViewRanger credit and tokens. The ViewRanger app includes a token pack worth of credit, and you'll be prompted when you need to buy more. To buy another token simply try to download another map tile you'll be told if you don't have enough credit, and shown a list of tokens you can buy. Tap one to purchase. In App Purchase Troubleshooting If you are told you don't have permission to purchase in app, leave ViewRanger and go to the phone's Settings app. Go into General, scroll down to Restrictions. Under Allowed content check that in app purchases are enabled. In app purchase can be slow to respond, especially when itunes is busy. Be patient. If you cancel an in app purchase it can be worth leaving ViewRanger and re-starting to try again. If you have made a purchase but have problems with the download, try closing the app fully, then opening again (or re-start the device) go back into ViewRanger store, in the app, and download the pending item. Backing up Maps You should back-up your premium maps and map tiles in case of a problem on the device. To backup the maps; connect the device to the computer, via the USB cable, start itunes then click your device and choose backup. By default premium map tiles are included in the backup. Online maps are not backed up by default. See next section for more information on online map backups. If you do not wish premium maps to be backed up choose Organizer Settings > Map settings > Backup includes maps set to OFF. Installing Maps and Copying Files Premium maps need to be copied directly onto the device. Other files, such a GPX files can also be copied onto the device. There are various methods for copying files onto the device. The recommended method for large map files is itunes File Sharing. Smaller files, such as GPX files, we recommend using Dropbox. You can also copy files on over wifi file access, which avoids using itunes, but we do not recommend this approach and have moved the wifi file access instructions to the appendix. 28

29 Import / Export Within the Organizer is the Import / Export section. The import / export section gives access to: The wifi web interface for installing maps and for importing and exporting GPX files. Wifi file access is now depreciated over the new itunes files sharing and Dropbox methods. GPX export. Load new data is used after installing maps. Documents file browser for checking the ViewRanger content on your phone. DropBox Login for copying small files. Files The Files section of Import / export, Documents, allows you to browse and manage the ViewRanger files on your phone. Dropbox Dropbox is a cross-platfrom file sharing service. ViewRanger now supports Dropbox, so you can export routes, tracks and POIs to GPX files directly to Dropbox. You can also import GPX files and other items from Dropbox. Dropbox only allows ViewRanger to access the /Apps/ViewRanger folder, so put the files in there. It's not recommended to use Dropbox to install large map files. If you have multiple copies of the app installed, Dropbox will only work with one. Sign in to your Dropbox account using Organizer Dropbox login. Import / export > 29

30 Import from Dropbox Once signed into Dropbox, you can browse the files in the ViewRanger folder of your Dropbox account. Select a file and you can use the "Download and import" button to download the file to your iphone/ipad, and then import it. You can do this for GPX files containing routes, tracks or POIs. You can also download and import Viewranger data files like.vrc map files or even.zip files, which Viewranger will unpack. Export to Dropbox To export a single item into a GPX file and send it straight to Dropbox, for example a track: Go to Organizer > Tracks > Track list > the track > Advanced > Export to Dropbox. Fill in the filename and confirm. To export a file to Dropbox from ViewRanger, for example a map or GPX file: Go to Organizer > Import/export > Documents and select the file Tap Export to Dropbox itunes File Sharing Interface for Installing Maps The itunes files sharing interface for installing maps bought for another phone and for importing and exporting GPX files. It shows a basic window of the root level only of the ViewRanger home folder on the device. It show the files and sub-folders in the home folder but not the contents of sub-folders. You can import individual and multiple files but not folders. You can export files and sub-folders. You can also delete items with the delete key on your computer but care should be taken with this. Connect device to computer with USB cable and open itunes. In itunes, on left, click your device. Click the Apps tab and scroll down to 'File Sharing'. Click on ViewRanger in the App list and, after a few moments, the ViewRanger home folder is displayed under 'Premium Documents' window. Use the 'Add' button to import maps and files and the 'save to' to export files. If you imported a zip file, then this must be manually un-zipped; open ViewRanger application on the device and select Organizer > Import / export > Documents and click the zip, then Import ZIP/VRZ. Lastly, in the ViewRanger application on the device, select Organizer > Import / export and Load new data. This is not required if you just un-packed a ZIP file 30

31 GPX Support The GPX route, track or POI is imported into the current map you are viewing only. GPX import / export can be integrated with Dropbox for copying GPX files and and off the device, which is recommended. If you select a GPX file you can use the filtered import options for example, you can import just the tracks in a GPX file. If you use 'Import routes' to import a file containing just waypoints, you'll be offered the chance to import the points as a route. You can export GPX files in 2 ways: On the Import / export panel the Export all to GPX' button saves all POIs, routes and tracks to a GPX file. 'Export visible to GPX' exports just the items that are visible, that is have not been hidden. Each route, track and POI in the Organizer has an 'Export item to GPX' button, allowing you to save that individual item. 31

32 Buddy Beacon The buddy beacon allows you to share your location with other people. They can see your position by entering your user name and your PIN number on a web page. The buddy beacon also allows you to watch/track other people on your device. You can see their last reported position by entering the user name and PIN number. You can also watch multiple beacons simultaneously. If you need to add/modify the active watch list then choose Buddy & tracker list. To use the buddy beacon you need to have registered and entered your account details. Do this using Organizer, then Account & license. Control the buddy beacon by going to Organizer, then BuddyBeacon. Beacon send on/off The switch at the top switches the buddy beacon on and off. When it is on the beacon reports your position regularly, as long as the GPS has a position fix. The frequency controls how often the beacon is sent. Use Add buddy to enter the name and PIN of a buddy to watch. Buddy Watch / track on/off This switch controls this feature and displays the frequency which controls how often the beacons are watched. Send beacon now this sends a single immediate beacon report, using either the centre of the map, or the GPS position, as the beacon location. Beacon Settings use this section to control BuddyBeacon. Beacon PIN enter a 4 digit PIN. This should be a number that you are happy to tell those you want to see your location. To change the PIN simply type a different number here and transmit the beacon. Update frequency controls how often the beacon is sent and or receive latest position, if enabled. When set to 2 minutes the beacon will be sent and or received every 2 minutes. Auto start beacon if this is switched on, then ViewRanger will start transmitting the beacon as soon as ViewRanger starts. Send old positions normally ViewRanger only records and shows the last position sent. Some people prefer it to show a history, which can be enabled using This switch tells ViewRanger that if it can't send a position report because there is no mobile network coverage, it should keep that position and send it when there is network coverage. This avoids gaps in trails in the buddy beacon view. Location bar icon while the beacon is transmitting it shows an icon in the coordinates bar at the top of the screen. The red arrow pointing outwards. While the beacon is receiving it shows an icon in the coordinates bar at the top of the screen. The red arrow pointing inwards. While the beacon is transmitting and receiving the red arrow points both outwards and inwards of the circle icon. 32

33 Buddy watch / track Buddy list Once you have added at least one Buddy you can use the Buddy list. The watch list should contain a valid list of beacons to watch/track. You have the option to turn-off/on individual beacon buddies. There are two options to observe a buddy. Watch/track enables watch activation. Once you have made your selection, you can go to back the top level menu and switch On/Off Watch track. The Locate now feature, provides a single immediate buddy location fix. [ Note: Locate now option does not require Watch/track to be switched on ] Buddy Beacon Add Buddy You can Watch or Locate multiple buddies within the watch list. To add a new buddy you will require a username and their 4 digit PIN number. Buddy Watch Country Change Note: if the located buddy is outside the bounds of the active coordinate/country system, ViewRanger does not change to show that country - you need to do that yourself using the Organizer's Maps list. Buddy Beacon Web Page To see the location of a buddy, go to Enter the user name and PIN, then press locate. You'll see a map showing the buddy location. Hover the cursor over the location to see the time and date details. Retrieva Dog Collar A buddy can be a Retrieva dog collar. The collar needs to be reporting its position using GPRS (not SMS), and you need to have set it up as a ViewRanger buddy using the Retreiva panel. Retrieva will be providing details. 33

34 My.ViewRanger.com Route Planning & Sharing My.ViewRanger.com is our web based route planning and community sharing tool that works seamlessly with the ViewRanger App. It even has wire-less synchronisation to your devices, so that you can upload routes you ve created or discovered on My.ViewRanger.com to your mobile. View & use your premium mapping online at my.viewranger.com Create your own route with text and pictures Print route cards of your maps Find a pre-planned route Publish & share your routes Invite your friends to join you Export routes to GPX It's completely free to use and as a registered ViewRanger customer, you can log-in using your existing ViewRanger account details. Once logged in, you can link the service to your mobile device. And because it s completely integrated with our mobile app you can manage your ViewRanger account, even top-up your ViewRanger credit. Synchronize The addition of Synchronization feature with the new my.viewranger.com web site. This allows you to send your tracks to the site, and share your routes between the site and ViewRanger on your mobile devices. You need to have registered your account at my.viewranger.com before you Synchronize. To Synchronize go to Organizer and use Synchronize at the top. New and changed tracks are uploaded. New and changed routes are downloaded from the server. The license key list is updated. You can also upload individual tracks - go to the Organizer, select a track from the track list and then use options Upload or Upload again. You can upload or re-download individual routes - go to the Organizer, select a route from the route list and then use options Upload, Upload again or Download again. 34

35 Navigation ViewRanger will help you navigate to a point or follow a route. To follow a route or navigate towards a specific point of interest or waypoint, either: Go to Organizer, find the item and tap on it. Choose Follow route or Navigate to, or Select the item on the map, press the Menu button Navigate to. and choose Follow route or Map Display While Navigating While navigating an arrow is shown in the top left. The arrow indicates the direction you should travel relative to your current direction of travel. Aim to keep it pointing straight upwards. Tap the arrow to see a menu of commands that control navigation. The colour of the arrow varies: Red when you are close to the target (red for stop) Blue if you are too far off route (blue for getting cold) Green if you are on route and not yet at the target (green for go) The navigation arrow can be switched off with Organizer Settings > GPS & navigation > Heading vector time and set slider to zero. A dotted line is drawn between the GPS position and the target point. Circles are drawn around the target and the alarm trigger point, the circle size showing the alarm trigger distances. Alarms ViewRanger has two different alarms: POI / Waypoint Arrival Alarm this alarm is triggered when you reach your target point or the next waypoint. The trigger distance is set in the GPS & navigation section of Settings. If the distance is set to 50 metres, then the alarm will trigger when you are within 50 metres of the target. XTE (Cross Track Error) Alarm this alarm is triggered if you deviate too far from the route. The trigger distance is set in the GPS & navigation section of Settings. If the distance is set to 100 metres, then the alarm will trigger if you are more than 100 metres from the route. You can switch the two alarms off individually. When an alarm has been triggered a warning message is shown and your chosen sound played every 10 seconds. You can silence an alarm by pressing the navigation arrow and choosing Silence alarm or pressing stop on the floating sound controls. The colour of the navigation arrow changes when the alarm is triggered red indicates arrival and blue indicates off route. 35

36 The blue box is the cross track error boundary. If you go outside this box, the cross track error alarm will sound and the arrow will go blue The pink circle is the arrival alarm once you enter the circle the alarm sounds and the navigation arrow is drawn red 1 2 1st waypoint Choosing the alarm tone Choose the alarm tone or sound in the GPS & navigation section of Settings. There are separate settings for the Arrival alarm and for the Cross track error alarm. You can choose any sound, tone, MP3 or music track. You can record and use your own sound. Sound and Video Links You can add a sound or video link to a waypoint or POI and it will be played when you first reach that point. In the description type using the format: <sound SoundFile.wav>Description</sound> This will appear as underlined text Description, which you can click on to play the sound file SoundFile.wav. This sound will be played once when you first reach the POI or waypoint. After being played the alarm will switch to the usual alarm tone until silenced. You could record a short description, which is played as you reach a point, or could have a special sound. This link is saved into GPX files and is imported from GPX files, if you prepare routes elsewhere. Videos can be embedded using the link format: <link href= video.3gp >Video</link> To be played as an alarm the video must further be surrounded by alarm tags, which can also be added around sounds: <alarm><link href= video.3gp >Video</link></alarm> 36

37 Route Navigation Settings There are three settings that control navigation. All are set in the GPS & navigation section of settings. 1. Arrival alarm distance - the distance at which the arrival alarm sounds and the navigation arrow turns red. This is the grey outer circle in the picture. 2. Cross track error (XTE) alarm distance - if you go more than this distance away from the route the cross track error alarm sounds and the navigation arrow turns blue. This is shown as the dotted line. 3. Show next waypoint distance - when you reach this distance away from the waypoint you are considered to have arrived at the waypoint. The navigation arrow will now point at the next waypoint on the route, so you know where to go next. This is shown as the red inner circle. The arrival alarm will still sound, so you know you are at the waypoint. Navigation Commands These commands are shown when you tap the navigation arrow: Silence alarm - silences the alarm. It won't sound again until it is triggered by a new event - for example, arriving at the next waypoint. Step target forward / backward - set the target waypoint to be the waypoint one later or one earlier in the route. Sometimes your location will cause this to have no visible effect - in which case you can switch off auto following and set the target manually. Auto follow on / off - toggle automatic route following on and off. If it is off then you need to manually advance the target waypoint using step target forward. Reset follow route - resets the automatic route following to start from the first waypoint. Note that if you are closer to another route section it will use that section of route. Stop navigate - stop navigating. 37

38 Following a route 1. Starting at the first point on the route the navigation arrow will point at the second point. As long as you stay on route, that is you don't trigger the cross track error alarm (so are within the dotted lines on the previous page), the navigation arrow will continue to point at the second waypoint. 2. When you reach the grey outer circle, the arrival alarm will trigger. The navigation arrow will turn red, but it will still point at the second waypoint. 3. When you reach the red inner circle you are considered to have arrived at the second waypoint. This waypoint is marked as achieved and won t be targeted again. The navigation arrow will now point at the third waypoint. The arrival alarm continues to sound until you pass the current waypoint - that is you are closer to the next leg of the route. 4. You are now navigated to the third waypoint. Once you have arrived at a waypoint that waypoint is marked as achieved. ViewRanger won't consider that waypoint again, or any before it. However, you can override that with menu commands. Even if you now go backwards towards waypoint 1 the navigation arrow will still point at waypoint 3. You can however change this by pressing the navigation arrow and choosing Step target backwards. 38

39 Detail of what happens as you reach the waypoint As you reach the waypoint there are two target distances involved. The navigation arrow points to the next waypoint. In the diagram below, as you go from waypoint number 1 to waypoint 2, the arrow points towards waypoint 2. Once you enter the inner circle (yellow), the navigation arrow shows the direction to the third waypoint The outer circle (pink) is the arrival alarm once you enter the circle the alarm sounds and the navigation arrow is drawn red When you reach the arrival alarm distance, the pink outer circle, the arrival alarm will sound if you have it enabled. The distance given by Show next wpt distance controls the distance at which ViewRanger will consider you to have arrived at a waypoint. It is shown as the inner yellow circle in the diagram below. Once you reach this distance from a waypoint, the navigation arrow will start pointing to the following waypoint. So in the diagram, when you reach the inner circle the navigation arrow will start pointing at waypoint 3. Its default value is 15m. If you have alarms enabled, the arrow will still be red while you are within the alarm distance. Going off route If you go off route by more than the cross track distance, ViewRanger will re-evaluate where you are. If it finds that you are closer to a later leg of the route it will direct you along that leg. It gives preference to the earlier route legs. However, if you return to your route it will revert to directing you to the next waypoint. It will never consider route legs prior to a waypoint that you passed through and was marked as achieved, as long as that waypoint was achieved in correct order. 39

40 Route Navigation Troubleshooting The most important setting is the Show next wpt distance. This defaults to 15 metres. If you find that the navigation arrow points to the subsequent waypoint too soon then reduce this setting. If you find the navigation arrow pointing backwards as you pass the waypoint then increase the value. On a 1:50,000 scale map 15 metres is a circle 6 pixels across and on a 1:25,000 scale map it is 12 pixels across. The cross track error distance is also important. For example, if you short cut a corner the navigation arrow will point at the waypoint you are missing until you are more than the cross track distance off the route. So if you often short cut corners, keep the cross track error distance quite low. The arrival alarm distance only determines when the arrival alarm starts sounding. Normally you want the alarm to sound as you approach a waypoint, so keep this setting greater than the next waypoint distance. Manual Route Navigation You can also manually select waypoints to navigate towards, rather than using the automatic method described above. To navigate to a specific waypoint first select the waypoint, then press the Menu button choose Navigate to. and Once you have chosen to navigate to a particular waypoint you can step forward or backward using the Navigate arrow menu s Step target forward or Step target backward commands. You can start using the automatic route following using the Navigate menu s Auto follow route on command. Support If you have any questions please contact support@viewranger.com or call us on ( from outside the UK). We can also be reached on Skype at viewranger. 40

41 Appendix Wifi Web Interface You will find it easier to use itunes to copy maps and other files onto the device (see section below) but these wifi instructions are given as an alternative method. To start the wifi web interface go to Organizer, then to Import / Export. Switch on Wifi file access. A URL will appear below the switch. Type this into a web browser. Note the whole URL is needed, including the http: and the :8080. You'll then see a web form from where you can upload maps, GPX files and icons. Your iphone's UDID will be shown on this form too. Troubleshooting If the form does not appear then carefully check the URL. You need the whole URL, including the http and the :8080. If the URL is correct then check the firewall settings on both the router and the computer permit access. Failing that please check the wiki via for more tips and also note you can try the itunes File Sharing Interface instead. Web Form The three links, GPX, Icons and Maps, allow you to list the content on the phone. 41

42 The 'Upload map or GPX file' section allows you to upload new content. The supported files are.vrc (Colour maps);.vrh (height/altitude);.gpx (points, routes, tracks);.loc (points). Also.ZIPs containing a number of the other files. The 'Upload icon' section allows you to add new custom icons. Any bitmap format supported by the iphone will do but small PNGs are best. Choose a file to upload by pressing the 'Browse...' button (this varies depending on your web broswer). Then press the 'Upload' button. While transferring a file a progress bar is shown on the phone. After transferring a map you'll need to enter a license key using Organizer > Account & License. To request a license key contact support with you iphone's UDID. The UDID is shown at the bottom of the web form. When a GPX file is sent you'll be told what is in the file, so you can confirm installation. The file is also available in the Files browser for later import. 42