Double-Hung Windows W-2500
|
|
- Felix O’Neal’
- 7 years ago
- Views:
Transcription
1 TABL OF CONTNTS GeneralInformation levations/sizes: 1/4 & 1/8 Scale SingleUnits TwinUnits TripleUnits WideUnits WideUnits Double-Hung Picture Double-Hung Transom GlazingOptions JambxtenderOptions Standard Mullion Options LiteCutInformation UnitSizingInformation ClearOpeningLayout SectionDetails April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-1
2 GNRAL INFORMATION Clad double hung windows feature fully operating upper and lower sash. Counterbalancing is achieved with helical spring extension systems hidden in weatherable PVC jambliners. Operating units are supplied with cam-type sash locks installed. There are several hardware finish options. Refer to the Specifications for available finish options. MULTIPL ASSMBLIS Clad double hung windows may be mulled beside other clad double hungs or clad picture windows, or below clad transom windows, to fulfill a wide variety of needs. Factory assembled mulls are limited in height (100 ), width (114 ), and a total area (75 square feet). April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-2
3 LVATION NOTS LVATION DRAWINGS UTILIZ A LIMITD NUMBR OF PROJCTD LINS TO PRODUC A RUDIMNTARY DRAWING INTNDD TO B USD IN A SMALL GRAPHICAL SCAL. LVATIONS AR VIWD PRPNDICULAR FROM TH XTRIOR OF TH STRUCTUR. IF MOR DIMNSIONS AR NDD, US TH SCTION DRAWINGS FOR MOR COMPLT DPICTIONS. ROUGH OPNING DIMNSIONS AR IN BOLD TXT. M.O. Brickmould M.O. Adams/Flat Casing Rough Opening Frame Size Daylight Opening 39 1/16 [ 992 ] 40 9/16 [ 1030 ] 36 3/4 [ 933 ] 36 [ 914 ] 14 11/16 [ 373 ] 24 7/8 [ 632 ] 27 7/8 [ 708 ] 22 1/8 [ 562 ] 21 3/8 (543) 16 1/16 (408) ## Masonry Openings for Brickmould, Flat & Adams Casing. Vertical measurements include sillnose. (Subtract 1/2 from Masonry Opening for Unit Size) S SYMBOL LGND BLOW OUTSID OF FRAM. COTTAG & RVRS COTTAG BOOK CODS DAYLIGHT OPNING 25CDH INDICATS W2500 CLAD DOUBL HUNG TH FIRST TWO NUMBRS INDICAT TH UNIT WIDTH 25CDH2136 BOOK COD TH LAST TWO NUMBRS INDICAT TH UNITS HIGHT 25CDH2148C24 UNIT WIDTH UNIT HIGHT C = COTTAG R = RVRS COTTAG LOWR SASH VRTICAL GLASS GNRAL DOUBL HUNG NOTS LVATION SYMBOL LGND: 1. ALL UNITS SHOWN AR AVAILABL AS OPRATORS ONLY. 2. UNIT LVATIONS AR SHOWN WITHOUT XTRIOR TRIM. 3. ALL OPRATING SASH AR INSTALLD WITH VINYL JAMB LINRS AND OPRATD WITH AN INTRNAL HLICAL SPRING SYSTM. 4. DIMNSIONAL VALUS IN BRACKTS AR MILLIMTR CONVRSIONS. ## BASIC UNIT CLAR OPNING XCDS 20 IN WIDTH, 24 IN HIGHT & A MINIMUM OF 5.7 SQ. FT. NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-3
4 OPRATION&SASHTILTING DOUBL HUNG OPRATION: When the sash are locked at the check rails the sash are closed and sealed in the sash opening of the frame. When the sash are unlocked the lower sash travels vertically to any position desired. The upper sash can also be positioned as desired. SASH TILTING FOR WASHING The Custom Double Hung window will allow the sash to be tilted or removed for easy cleaning. April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-4
5 SINGL UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 24 1/8 (613) 22 1/8 (562) 21 3/8 (543) 16 1/16 (408) 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 30 1/8 (765) 29 3/8 (746) 24 1/16 (611) 36 1/8 (918) 34 1/8 (867) 33 3/8 (848) 28 1/16 (716) 40 1/8 (1019) 38 1/8 (968) 37 3/8 (949) 32 1/16 (814) 44 1/8 (1121) 42 1/8 (1070) 41 3/8 (1051) 36 1/16 (916) 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 25CDH CDH CDH CDH CDH CDH /4 (1086) 40 3/4 (1035) 40 (1016) 16 11/16 (424)[2] 25CDH CDH CDH CDH CDH CDH /4 (1289) 48 3/4 (1238) 48 (1219) 25CDH CDH CDH CDH CDH CDH /4 (1391) 52 3/4 (1340) 52 (1321) 25CDH CDH CDH CDH CDH CDH /4 (1492) 56 3/4 (1441) 56 (1441) CDH CDH CDH CDH CDH CDH /4 (1594) 60 3/4 (1543) 60 (1543) 26 11/16 (678)[2] 24 11/16 (627)[2] 22 11/16 (576)[2] 20 11/16 (525)[2] CDH CDH CDH CDH CDH CDH4160 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. 1 UNITS WITH AN 1 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 2 UNITS WITH AN 2 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. 3 UNITS WITH AN 3 GRSS DSIGNATION MT 5.7 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 4 UNITS WITH AN 4 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-5
6 SINGL UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 24 1/8 (613) 22 1/8 (562) 21 3/8 (543) 16 1/16 (408) 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 30 1/8 (765) 29 3/8 (746) 24 1/16 (611) 36 1/8 (918) 34 1/8 (867) 33 3/8 (848) 28 1/16 (716) 40 1/8 (1019) 38 1/8 (968) 37 3/8 (949) 32 1/16 (814) 44 1/8 (1121) 42 1/8 (1070) 41 3/8 (1051) 36 1/16 (916) 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 70 3/4 (1797) 68 3/4 (1746) 68 (1727) 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 78 3/4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 32 11/16 (830)[2] 30 11/16 (779)[2] 27 11/16 (703)[2] 2 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH3768 * 4 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH3776 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. 1 UNITS WITH AN 1 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 2 UNITS WITH AN 2 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. 3 UNITS WITH AN 3 GRSS DSIGNATION MT 5.7 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 4 UNITS WITH AN 4 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-6
7 SINGL UNITS - NOMINAL UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 22 (559) 20 (508) 13 15/16 (354) 26 (660) 24 (610) 23 1/4 (591) 17 15/16 (455) 30 (762) 28 (711) 27 1/4 (692) 21 15/16 (557) 34 (864) 32 (813) 31 1/4 (794) 25 15/16 (659) 38 (965) 36 (914) 35 1/4 (895) 29 15/16 (760) 38 (965) 36 (914) 35 1/4 (895) 14 5/16 (364)[2] 25CDH2036N 25CDH2436N 25CDH2836N 25CDH3236N 25CDH3636N 44 (1118) 42 (1067) 41 1/4 (1048) 17 5/16 (440)[2] 25CDH2042N 25CDH2442N 25CDH2842N 25CDH3242N 25CDH3642N 50 (1270) 48 (1219) 47 1/4 (1200) 20 5/16 (515)[2] 25CDH2048N 25CDH2448N 25CDH2848N 25CDH3248N 25CDH3648N 56 (1422) 54 (1372) 53 1/4 (1353) 25CDH2054N 25CDH2454N 25CDH2854N 25CDH3254N 25CDH3654N 62 (1575) 60 (1524) 59 1/4 (1505) 23 5/16 (592)[2] 26 5/16 (668)[2] CDH2060N 25CDH2460N 25CDH2860N 25CDH3260N 25CDH3660N LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. 1 UNITS WITH AN 1 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 2 UNITS WITH AN 2 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. 3 UNITS WITH AN 3 GRSS DSIGNATION MT 5.7 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 4 UNITS WITH AN 4 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. N INDICATS NOMINAL SIZING. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-7
8 SINGL UNITS - NOMINAL UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 22 (559) 20 (508) 13 15/16 (354) 26 (660) 24 (610) 23 1/4 (591) 17 15/16 (455) 30 (762) 28 (711) 27 1/4 (692) 21 15/16 (557) 34 (864) 32 (813) 31 1/4 (794) 25 15/16 (659) 38 (965) 36 (914) 35 1/4 (895) 29 15/16 (760) 68 (1727) 66 (1676) 65 1/4 (1657) CDH2066N 25CDH2466N 25CDH2866N 25CDH3266N 25CDH3666N 74 (1880) 72 (1829) 71 1/4 (1810) 32 5/16 (821)[2] 29 5/16 (745)[2] CDH2072N 25CDH2472N 25CDH2872N 25CDH3272N 25CDH3672N LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. 1 UNITS WITH AN 1 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 2 UNITS WITH AN 2 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. 3 UNITS WITH AN 3 GRSS DSIGNATION MT 5.7 SQ FT GRSS WITH A DP35 SILL STOP, BUT NOT WITH A DP 50 SILL STOP. 4 UNITS WITH AN 4 GRSS DSIGNATION MT 5.0 SQ FT GRSS WITH ITHR A DP35 OR A DP 50 SILL STOP. N INDICATS NOMINAL SIZING. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-8
9 SINGL UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 36 1/8 (918) 40 1/8 (1019) 30 1/8 (765) 34 1/8 (867) 38 1/8 (968) 29 3/8 (746) 33 3/8 (848) 37 3/8 (949) 24 1/16 (611) 28 1/16 (716) 32 1/16 (814) 25CDH2536-1T15 25CDH2936-1T15 25CDH3336-1T15 25CDH3736-1T15 25CDH2540-1T15 25CDH2940-1T15 25CDH3340-1T15 25CDH3740-1T15 25CDH2548-1T15 25CDH2948-1T15 25CDH3348-1T15 25CDH3748-1T /4 (1772) 67 3/4 (1721) 67 (1702) 22 11/16 (576)[2] 10 1/4 (260) 65 3/4 (1670) 63 3/4 (1619) 63 (1600) 20 11/16 (525)[2] 10 1/4 (260) 57 3/4 (1467) 55 3/4 (1416) 55 (1397) 16 11/16 (424)[2] 10 1/4 (260) 53 3/4 (1365) 51 3/4 (1314) 51 (1295) 14 11/16 (373)[2] 10 1/4 (260) 25CDH2552-1T15 25CDH2952-1T15 25CDH3352-1T15 25CDH3752-1T /4 (1873) 71 3/4 (1822) 71 (1803) 24 11/16 (627)[2] 10 1/4 (260) 25CDH2556-1T15 25CDH2956-1T15 25CDH3356-1T15 25CDH3756-1T /4 (1975) 75 3/4 (1924) 75 (1905) 26 11/16 (678)[2] 10 1/4 (260) 25CDH2560-1T15 25CDH2960-1T15 25CDH3360-1T15 25CDH3760-1T /4 (2076) 79 3/4 (2026) 79 (2007) 27 11/16 (703)[2] 10 1/4 (260) 25CDH2564-1T15 25CDH2964-1T15 25CDH3364-1T15 25CDH3764-1T /4 (2178) 83 3/4 (2127) 83 (2108) 30 11/16 (779)[2] 10 1/4 (260) 25CDH2568-1T15 25CDH2968-1T15 25CDH3368-1T15 25CDH3768-1T15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-9
10 SINGL UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 36 1/8 (918) 40 1/8 (1019) 30 1/8 (765) 34 1/8 (867) 38 1/8 (968) 29 3/8 (746) 33 3/8 (848) 37 3/8 (949) 24 1/16 (611) 28 1/16 (716) 32 1/16 (814) 89 3/4 (2280) 87 3/4 (2229) 87 (2210) 32 11/16 (830)[2] 10 1/4 (260) 25CDH2572-1T15 25CDH2972-1T15 25CDH3372-1T15 25CDH3772-1T /4 (2381) 91 3/4 (2330) 91 (2311) 34 11/16 (881)[2] 10 1/4 (260) 25CDH2576-1T15 25CDH2976-1T15 25CDH3376-1T15 25CDH3776-1T15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-10
11 SINGL UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 36 1/8 (918) 40 1/8 (1019) 30 1/8 (765) 34 1/8 (867) 38 1/8 (968) 29 3/8 (746) 33 3/8 (848) 37 3/8 (949) 24 1/16 (611) 28 1/16 (716) 32 1/16 (814) 25CDH2536-1T24 25CDH2936-1T24 25CDH3336-1T24 25CDH3736-1T24 25CDH2540-1T24 25CDH2940-1T24 25CDH3340-1T24 25CDH3740-1T /4 (1899) 72 3/4 (1848) 72 (1829) 20 11/16 (525)[2] 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 16 11/16 (424)[2] 62 3/4 (1594) 60 3/4 (1543) 60 (1524) 14 11/16 (373)[2] 25CDH2548-1T24 25CDH2948-1T24 25CDH3348-1T24 25CDH3748-1T /4 (2000) 76 3/4 (1949) 76 (1930) 22 11/16 (576)[2] 25CDH2552-1T24 25CDH2952-1T24 25CDH3352-1T24 25CDH3752-1T /4 (2102) 80 3/4 (2051) 80 (2032) 24 11/16 (627)[2] 25CDH2556-1T24 25CDH2956-1T24 25CDH3356-1T24 25CDH3756-1T /4 (2203) 84 3/4 (2153) 84 (2134) 26 11/16 (678)[2] 25CDH2560-1T24 25CDH2960-1T24 25CDH3360-1T24 25CDH3760-1T /4 (2305) 88 3/4 (2254) 88 (2235) 27 11/16 (703)[2] 25CDH2564-1T24 25CDH2964-1T24 25CDH3364-1T24 25CDH3764-1T24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-11
12 SINGL UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 28 1/8 (714) 26 1/8 (664) 25 3/8 (645) 20 1/16 (510) 32 1/8 (816) 36 1/8 (918) 40 1/8 (1019) 30 1/8 (765) 34 1/8 (867) 38 1/8 (968) 29 3/8 (746) 33 3/8 (848) 37 3/8 (949) 24 1/16 (611) 28 1/16 (716) 32 1/16 (814) 94 3/4 (2407) 92 3/4 (2356) 92 (2337) 30 11/16 (779)[2] 25CDH2568-1T24 25CDH2968-1T24 25CDH3368-1T24 25CDH3768-1T /4 (2508) 96 3/4 (2457) 96 (2438) 32 11/16 (830)[2] 25CDH2572-1T24 25CDH2972-1T24 25CDH3372-1T24 25CDH3772-1T /4 (2610) 100 3/4 (2559) 100 (2540) 34 11/16 (881)[2] 25CDH2576-1T24 25CDH2976-1T24 25CDH3376-1T24 25CDH3776-1T24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-12
13 SINGL UNITS - NOMINAL WITH 18 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 22 (559) 20 (508) 13 15/16 (354) 26 (660) 30 (762) 38 (965) 24 (610) 28 (711) 36 (914) 23 1/4 (591) 27 1/4 (692) 35 1/4 (895) 17 15/16 (455) 21 15/16 (557) 29 15/16 (760) 25CDH2036N-1T18 25CDH2436N-1T18 25CDH2836N-1T18 25CDH3636N-1T18 25CDH2042N-1T18 25CDH2442N-1T18 25CDH2842N-1T18 25CDH3642N-1T18 25CDH2048N-1T18 25CDH2448N-1T18 25CDH2848N-1T18 25CDH3648N-1T18 25CDH2054N-1T18 25CDH2454N-1T18 25CDH2854N-1T18 25CDH3654N-1T18 80 (2032) 78 (1981) 77 1/4 (1962) 26 5/16 (668)[2] 13 1/4 (337) 74 (1880) 72 (1829) 71 1/4 (1810) 23 5/16 (592)[2] 13 1/4 (337) 68 (1727) 66 (1676) 65 1/4 (1657) 20 5/16 (515)[2] 13 1/4 (337) 62 (1575) 60 (1524) 59 1/4 (1505) 17 5/16 (440)[2] 13 1/4 (337) 56 (1422) 54 (1372) 53 1/4 (1353) 14 5/16 (364)[2] 13 1/4 (337) 25CDH2060N-1T18 25CDH2460N-1T18 25CDH2860N-1T18 25CDH3660N-1T18 86 (2184) 84 (2134) 83 1/4 (2115) 29 5/16 (745)[2] 13 1/4 (337) 25CDH2066N-1T18 25CDH2466N-1T18 25CDH2866N-1T18 25CDH3666N-1T18 92 (2337) 90 (2286) 89 1/4 (2267) 32 5/16 (821)[2] 13 1/4 (337) 25CDH2072N-1T18 25CDH2472N-1T18 25CDH2872N-1T18 25CDH3672N-1T18 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. N INDICATS NOMINAL SIZING. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-13
14 TWIN UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 45 1/2 (1156) 43 1/2 (1105) 42 3/4 (1086) 16 1/16 (408)[2] 53 1/2 (1359) 51 1/2 (1308) 50 3/4 (1289) 20 1/16 (510)[2] 61 1/2 (1562) 59 1/2 (1511) 58 3/4 (1492) 24 1/16 (611)[2] 69 1/2 (1765) 67 1/2 (1715) 66 3/4 (1696) 28 1/16 (713)[2] 77 1/2 (1969) 75 1/2 (1918) 74 3/4 (1899) 32 1/16 (814)[2] 85 1/2 (2172) 83 1/2 (2121) 82 3/4 (2102) 36 1/16 (916)[2] 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 25CDH CDH CDH CDH CDH CDH /4 (1086) 40 3/4 (1035) 40 (1016) 16 11/16 (424)[2] 25CDH CDH CDH CDH CDH CDH /4 (2000) 76 3/4 (1949) 76 (1930) 54 3/4 (1391) 52 3/4 (1340) 52 (1321) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (1492) 56 3/4 (1441) 56 (1441) 24 11/16 (627)[2] 25CDH CDH CDH CDH CDH CDH /4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 25CDH CDH CDH CDH CDH CDH /4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 25CDH CDH CDH CDH CDH CDH /4 (1797) 68 3/4 (1746) 68 (1727) 25CDH CDH CDH CDH CDH /4 (1899) 72 3/4 (1848) 72 (1829) 25CDH CDH CDH CDH CDH /16 (881)[2] 22 11/16 (576)[2] 20 11/16 (525)[2] 30 11/16 (779)[2] 32 11/16 (830)[2] 25CDH CDH CDH CDH CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-14
15 TWIN UNITS - NOMINAL UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 42 (1067) 40 (1016) 39 1/4 (997) 13 15/16 (354)[2] 50 (1270) 48 (1219) 47 1/4 (1200) 17 15/16 (455)[2] 58 (1473) 56 (1422) 55 1/4 (1403) 21 15/16 (557)[2] 66 (1676) 64 (1626) 63 1/4 (1607) 25 15/16 (659)[2] 74 (1880) 72 (1829) 71 1/4 (1810) 29 15/16 (760)[2] 38 (965) 36 (914) 35 1/4 (895) 14 5/16 (364)[2] 44 (1118) 42 (1067) 41 1/4 (1048) 50 (1270) 48 (1219) 47 1/4 (1200) 17 5/16 (440)[2] 20 5/16 (515)[2] 25CDH2036N-2 25CDH2436N-2 25CDH2836N-2 25CDH3236N-2 25CDH3636N-2 25CDH2042N-2 25CDH2442N-2 25CDH2842N-2 25CDH3242N-2 25CDH3642N-2 25CDH2048N-2 25CDH2448N-2 25CDH2848N-2 25CDH3248N-2 25CDH3648N-2 56 (1422) 54 (1372) 53 1/4 (1353) 23 5/16 (592)[2] 25CDH2054N-2 25CDH2454N-2 25CDH2854N-2 25CDH3254N-2 25CDH3654N-2 62 (1575) 60 (1524) 59 1/4 (1505) 26 5/16 (668)[2] 25CDH2060N-2 25CDH2460N-2 25CDH2860N-2 25CDH3260N-2 25CDH3660N-2 68 (1727) 66 (1676) 65 1/4 (1657) 29 5/16 (745)[2] 25CDH2066N-2 25CDH2466N-2 25CDH2866N-2 25CDH3266N-2 25CDH3666N-2 74 (1880) 72 (1829) 71 1/4 (1810) 32 5/16 (821)[2] 25CDH2072N-2 25CDH2472N-2 25CDH2872N-2 25CDH3272N-2 25CDH3672N-2 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. N INDICATS NOMINAL SIZING. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-15
16 TWIN UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 53 1/2 (1259) 51 1/2 (1308) 50 3/4 (1289) 20 1/16 (510)[2] 61 1/2 (1562) 59 1/2 (1511) 58 3/4 (1492) 24 1/16 (611)[2] 69 1/2 (1765) 67 1/2 (1715) 66 3/4 (1695) 28 1/16 (716)[2] 77 1/2 (1969) 75 1/2 (1918) 74 3/4 (1899) 32 1/16 (814)[2] 69 3/4 (1772) 67 3/4 (1721) 67 (1702) 22 11/16 (576)[2] 10 1/4 (260) 65 3/4 (1670) 63 3/4 (1619) 63 (1600) 20 11/16 (525)[2] 10 1/4 (260) 57 3/4 (1467) 55 3/4 (1416) 55 (1397) 16 11/16 (424)[2] 10 1/4 (260) 53 3/4 (1365) 51 3/4 (1314) 51 (1295) 14 11/16 (373)[2] 10 1/4 (260) 25CDH2536-2A15 25CDH2936-2A15 25CDH3336-2A15 25CDH3736-2A15 25CDH2540-2A15 25CDH2940-2A15 25CDH3340-2A15 25CDH3740-2A15 25CDH2548-2A15 25CDH2948-2A15 25CDH3348-2A15 25CDH3748-2A15 25CDH2552-2A15 25CDH2952-2A15 25CDH3352-2A15 25CDH3752-2A /4 (1873) 71 3/4 (1822) 71 (1803) 24 11/16 (627)[2] 10 1/4 (260) 25CDH2556-2A15 25CDH2956-2A15 25CDH3356-2A15 25CDH3756-2A /4 (1975) 75 3/4 (1924) 75 (1905) 26 11/16 (678)[2] 10 1/4 (260) 25CDH2560-2A15 25CDH2960-2A15 25CDH3360-2A15 25CDH3760-2A /4 (2178) 83 3/4 (2127) 83 (2108) 30 11/16 (779)[2] 10 1/4 (260) 81 3/4 (2076) 79 3/4 (2026) 79 (2007) 27 11/16 (703)[2] 10 1/4 (260) 25CDH2564-2A15 25CDH2964-2A15 25CDH3364-2A15 25CDH3764-2A15 25CDH2568-2A15 25CDH2968-2A15 25CDH3368-2A15 25CDH3768-2A15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-16
17 TWIN UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 53 1/2 (1259) 51 1/2 (1308) 50 3/4 (1289) 20 1/16 (510)[2] 61 1/2 (1562) 59 1/2 (1511) 58 3/4 (1492) 24 1/16 (611)[2] 69 1/2 (1765) 67 1/2 (1715) 66 3/4 (1695) 28 1/16 (716)[2] 77 1/2 (1969) 75 1/2 (1918) 74 3/4 (1899) 32 1/16 (814)[2] 93 3/4 (2381) 91 3/4 (2330) 91 (2311) 34 11/16 (881)[2] 10 1/4 (260) 89 3/4 (2280) 87 3/4 (2229) 87 (2210) 32 11/16 (830)[2] 10 1/4 (260) 25CDH2572-2A15 25CDH2972-2A15 25CDH3372-2A15 25CDH3772-2A15 25CDH2576-2A15 25CDH2976-2A15 25CDH3376-2A15 25CDH3776-2A15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-17
18 TWIN UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 53 1/2 (1259) 51 1/2 (1308) 50 3/4 (1289) 20 1/16 (510)[2] 61 1/2 (1562) 59 1/2 (1511) 58 3/4 (1492) 24 1/16 (611)[2] 69 1/2 (1765) 67 1/2 (1715) 66 3/4 (1695) 28 1/16 (716)[2] 77 1/2 (1969) 75 1/2 (1918) 74 3/4 (1899) 32 1/16 (814)[2] 25CDH2536-2A24 25CDH2936-2A24 25CDH3336-2A24 25CDH3736-2A24 25CDH2540-2A24 25CDH2940-2A24 25CDH3340-2A24 25CDH3740-2A24 25CDH2548-2A24 25CDH2948-2A24 25CDH3348-2A24 25CDH3748-2A24 25CDH2552-2A24 25CDH2952-2A24 25CDH3352-2A24 25CDH3752-2A /4 (2102) 80 3/4 (2051) 80 (2032) 24 11/16 (627)[2] 78 3/4 (2000) 76 3/4 (1949) 76 (1930) 22 11/16 (576)[2] 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 20 11/16 (525)[2] 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 16 11/16 (424)[2] 62 3/4 (1594) 60 3/4 (1543) 60 (1524) 14 11/16 (373)[2] 25CDH2556-2A24 25CDH2956-2A24 25CDH3356-2A24 25CDH3756-2A /4 (2203) 84 3/4 (2153) 84 (2134) 26 11/16 (678)[2] 25CDH2560-2A24 25CDH2960-2A24 25CDH3360-2A24 25CDH3760-2A /4 (2305) 88 3/4 (2254) 88 (2235) 27 11/16 (703)[2] 25CDH2564-2A24 25CDH2964-2A24 25CDH3364-2A24 25CDH3764-2A24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-18
19 TWIN UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 53 1/2 (1259) 51 1/2 (1308) 50 3/4 (1289) 20 1/16 (510)[2] 61 1/2 (1562) 59 1/2 (1511) 58 3/4 (1492) 24 1/16 (611)[2] 69 1/2 (1765) 67 1/2 (1715) 66 3/4 (1695) 28 1/16 (716)[2] 77 1/2 (1969) 75 1/2 (1918) 74 3/4 (1899) 32 1/16 (814)[2] 94 3/4 (2407) 92 3/4 (2356) 92 (2337) 30 11/16 (779)[2] 25CDH2568-2A24 25CDH2968-2A24 25CDH3368-2A24 25CDH3768-2A /4 (2508) 96 3/4 (2457) 96 (2438) 32 11/16 (830)[2] 25CDH2572-2A24 25CDH2972-2A24 25CDH3372-2A24 25CDH3772-2A /4 (2610) 100 3/4 (2559) 100 (2540) 34 11/16 (881)[2] 25CDH2576-2A24 25CDH2976-2A24 25CDH3376-2A24 25CDH3776-2A24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-19
20 TWIN UNITS - NOMINAL WITH 18 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 42 (1067) 40 (1016) 39 1/4 (997) 13 15/16 (354)[2] 50 (1270) 48 (1219) 47 1/4 (1200) 17 15/16 (455)[2] 58 (1473) 56 (1422) 55 1/4 (1403) 21 15/16 (557)[2] 74 (1880) 72 (1829) 71 1/4 (1810) 29 15/16 (760)[2] 56 (1422) 54 (1372) 53 1/4 (1353) 14 5/16 (364)[2] 13 1/4 (337) 25CDH2036N-2A18 25CDH2436N-2A18 25CDH2836N-2A18 25CDH3636N-2A18 62 (1575) 60 (1524) 59 1/4 (1505) 17 5/16 (440)[2] 13 1/4 (337) 25CDH2042N-2A18 25CDH2442N-2A18 25CDH2842N-2A18 25CDH3642N-2A18 68 (1727) 66 (1676) 65 1/4 (1657) 20 5/16 (515)[2] 13 1/4 (337) 25CDH2048N-2A18 25CDH2448N-2A18 25CDH2848N-2A18 25CDH3648N-2A18 74 (1880) 72 (1829) 71 1/4 (1810) 23 5/16 (592)[2] 13 1/4 (337) 25CDH2054N-2A18 25CDH2454N-2A18 25CDH2854N-2A18 25CDH3654N-2A18 80 (2032) 78 (1981) 77 1/4 (1962) 26 5/16 (668)[2] 13 1/4 (337) 25CDH2060N-2A18 25CDH2460N-2A18 25CDH2860N-2A18 25CDH3660N-2A18 86 (2184) 84 (2134) 83 1/4 (2115) 29 5/16 (745)[2] 13 1/4 (337) 25CDH2066N-2A18 25CDH2466N-2A18 25CDH2866N-2A18 25CDH3666N-2A18 92 (2337) 90 (2286) 89 1/4 (2267) 32 5/16 (821)[2] 13 1/4 (337) 25CDH2072N-2A18 25CDH2472N-2A18 25CDH2872N-2A18 25CDH3672N-2A18 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. N INDICATS NOMINAL SIZING. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-20
21 TRIPL UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 66 7/8 (1699) 64 7/8 (1648) 64 1/8 (1629) 16 1/16 (408)[3] 78 7/8 (2003) 76 7/8 (1953) 76 1/8 (1934) 20 1/16 (510)[3] 90 7/8 (2308) 88 7/8 (2257) 88 1/8 (2238) 24 1/16 (611)[3] 102 7/8 (2613) 100 7/8 (2562) 100 1/8 (2543) 28 1/16 (713)[3] 114 7/8 (2918) 112 7/8 (2867) 112 1/8 (2848) 32 1/16 (814)[3] 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 16 11/16 (424)[2] 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (1492) 56 3/4 (1441) 56 (1441) 24 11/16 (627)[2] 25CDH CDH CDH CDH CDH /4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 25CDH CDH CDH CDH CDH /4 (1695) 64 3/4 (1645) 64 (1626) 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 54 3/4 (1391) 52 3/4 (1340) 52 (1321) 22 11/16 (576)[2] 27 11/16 (703)[2] 70 3/4 (1797) 68 3/4 (1746) 68 (1727) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 20 11/16 (525)[2] 30 11/16 (779)[2] 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 32 11/16 (830)[2] 25CDH CDH CDH CDH CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-21
22 TRIPL UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 126 7/8 (3223) 124 7/8 (3172) 124 1/8 (3153) 36 1/16 (916)[3] 25CDH CDH CDH /4 (1391) 52 3/4 (1340) 52 (1321) 22 11/16 (576)[2] 16 11/16 (424)[2] 20 11/16 (525)[2] 25CDH /4 (1492) 56 3/4 (1441) 56 (1441) 24 11/16 (627)[2] 25CDH /4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 25CDH /4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 25CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-22
23 TRIPL UNITS - NOMINAL UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 62 (1575) 60 (1524) 59 1/4 (1505) 13 15/16 (354)[3] 74 (1880) 72 (1829) 71 1/4 (1810) 17 15/16 (455)[3] 86 (2184) 84 (2134) 83 1/4 (2115) 21 15/16 (557)[3] 98 (2489) 96 (2438) 95 1/4 (2419) 25 15/16 (659)[3] 110 (2794) 108 (2743) 107 1/4 (2724) 29 15/16 (760)[3] 38 (965) 36 (914) 35 1/4 (895) 14 5/16 (364)[2] 25CDH2036N-3 25CDH2436N-3 25CDH2836N-3 25CDH3236N-3 25CDH3636N-3 25CDH2042N-3 25CDH2442N-3 25CDH2842N-3 25CDH3242N-3 25CDH3642N-3 25CDH2048N-3 25CDH2448N-3 25CDH2848N-3 25CDH3248N-3 25CDH3648N-3 25CDH2054N-3 25CDH2454N-3 25CDH2854N-3 25CDH3254N-3 25CDH3654N-3 62 (1575) 60 (1524) 59 1/4 (1505) 26 5/16 (668)[2] 25CDH2060N-3 25CDH2460N-3 25CDH2860N-3 25CDH3260N-3 25CDH3660N-3 68 (1727) 66 (1676) 65 1/4 (1657) 25CDH2066N-3 25CDH2466N-3 25CDH2866N-3 25CDH3266N-3 25CDH3666N-3 74 (1880) 72 (1829) 71 1/4 (1810) 32 5/16 (821)[2] 56 (1422) 54 (1372) 53 1/4 (1353) 29 5/16 (745)[2] 23 5/16 (592)[2] 50 (1270) 48 (1219) 47 1/4 (1200) 20 5/16 (515)[2] 44 (1118) 42 (1067) 41 1/4 (1048) 17 5/16 (440)[2] 25CDH2072N-3 25CDH2472N-3 25CDH2872N-3 25CDH3272N-3 25CDH3672N-3 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. N INDICATS NOMINAL SIZING. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-23
24 TRIPL UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 78 7/8 (2003) 76 7/8 (1953) 76 1/8 (1934) 20 1/16 (510)[3] 90 7/8 (2308) 102 7/8 (2613) 114 7/8 (2918) 88 7/8 (2257) 100 7/8 (2562) 112 7/8 (2867) 88 1/8 (2238) 100 1/8 (2543) 112 1/8 (2848) 24 1/16 (611)[3] 28 1/16 (716)[3] 32 1/16 (814)[3] 25CDH2536-3A15 25CDH2936-3A15 25CDH3336-3A15 25CDH3736-3A15 25CDH2540-3A15 25CDH2940-3A15 25CDH3340-3A15 25CDH3740-3A15 25CDH2548-3A15 25CDH2948-3A15 25CDH3348-3A15 25CDH3748-3A /4 (1772) 67 3/4 (1721) 67 (1702) 22 11/16 (576)[2] 10 1/4 (260) 65 3/4 (1670) 63 3/4 (1619) 63 (1600) 20 11/16 (525)[2] 10 1/4 (260) 57 3/4 (1467) 55 3/4 (1416) 55 (1397) 16 11/16 (424)[2] 10 1/4 (260) 53 3/4 (1365) 51 3/4 (1314) 51 (1295) 14 11/16 (373)[2] 10 1/4 (260) 25CDH2552-3A15 25CDH2952-3A15 25CDH3352-3A15 25CDH3752-3A /4 (1873) 71 3/4 (1822) 71 (1803) 24 11/16 (627)[2] 10 1/4 (260) 25CDH2556-3A15 25CDH2956-3A15 25CDH3356-3A15 25CDH3756-3A /4 (1975) 75 3/4 (1924) 75 (1905) 26 11/16 (678)[2] 10 1/4 (260) 25CDH2560-3A15 25CDH2960-3A15 25CDH3360-3A15 25CDH3760-3A /4 (2076) 79 3/4 (2026) 79 (2007) 27 11/16 (703)[2] 10 1/4 (260) 25CDH2564-3A15 25CDH2964-3A15 25CDH3364-3A15 25CDH3764-3A /4 (2178) 83 3/4 (2127) 83 (2108) 30 11/16 (779)[2] 10 1/4 (260) 25CDH2568-3A15 25CDH2968-3A15 25CDH3368-3A15 25CDH3768-3A15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-24
25 TRIPL UNITS WITH 15 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 78 7/8 (2003) 76 7/8 (1953) 76 1/8 (1934) 20 1/16 (510)[3] 90 7/8 (2308) 102 7/8 (2613) 114 7/8 (2918) 88 7/8 (2257) 100 7/8 (2562) 112 7/8 (2867) 88 1/8 (2238) 100 1/8 (2543) 112 1/8 (2848) 24 1/16 (611)[3] 28 1/16 (716)[3] 32 1/16 (814)[3] 89 3/4 (2280) 87 3/4 (2229) 87 (2210) 32 11/16 (830)[2] 10 1/4 (260) 25CDH2572-3A15 25CDH2972-3A15 25CDH3372-3A15 25CDH3772-3A /4 (2381) 91 3/4 (2330) 91 (2311) 34 11/16 (881)[2] 10 1/4 (260) 25CDH2576-3A15 25CDH2976-3A15 25CDH3376-3A15 25CDH3776-3A15 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-25
26 TRIPL UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 78 7/8 (2003) 76 7/8 (1953) 76 1/8 (1934) 20 1/16 (510)[3] 90 7/8 (2308) 102 7/8 (2613) 114 7/8 (2918) 88 7/8 (2257) 100 7/8 (2562) 112 7/8 (2867) 88 1/8 (2238) 100 1/8 (2543) 112 1/8 (2848) 24 1/16 (611)[3] 28 1/16 (716)[3] 32 1/16 (814)[3] 25CDH2536-3A24 25CDH2936-3A24 25CDH3336-3A24 25CDH3736-3A24 25CDH2540-3A24 25CDH2940-3A24 25CDH3340-3A24 25CDH3740-3A24 25CDH2548-3A24 25CDH2948-3A24 25CDH3348-3A24 25CDH3748-3A /4 (2000) 76 3/4 (1949) 76 (1930) 22 11/16 (576)[2] 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 20 11/16 (525)[2] 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 16 11/16 (424)[2] 62 3/4 (1594) 60 3/4 (1543) 60 (1524) 14 11/16 (373)[2] 25CDH2552-3A24 25CDH2952-3A24 25CDH3352-3A24 25CDH3752-3A /4 (2102) 80 3/4 (2051) 80 (2032) 24 11/16 (627)[2] 25CDH2556-3A24 25CDH2956-3A24 25CDH3356-3A24 25CDH3756-3A /4 (2203) 84 3/4 (2153) 84 (2134) 26 11/16 (678)[2] 25CDH2560-3A24 25CDH2960-3A24 25CDH3360-3A24 25CDH3760-3A /4 (2305) 88 3/4 (2254) 88 (2235) 27 11/16 (703)[2] 25CDH2564-3A24 25CDH2964-3A24 25CDH3364-3A24 25CDH3764-3A24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-26
27 TRIPL UNITS WITH 24 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 78 7/8 (2003) 76 7/8 (1953) 76 1/8 (1934) 20 1/16 (510)[3] 90 7/8 (2308) 102 7/8 (2613) 114 7/8 (2918) 88 7/8 (2257) 100 7/8 (2562) 112 7/8 (2867) 88 1/8 (2238) 100 1/8 (2543) 112 1/8 (2848) 24 1/16 (611)[3] 28 1/16 (716)[3] 32 1/16 (814)[3] 25CDH2568-3A24 25CDH2968-3A24 25CDH3368-3A24 25CDH3768-3A /4 (2508) 96 3/4 (2457) 96 (2438) 32 11/16 (830)[2] 94 3/4 (2407) 92 3/4 (2356) 92 (2337) 30 11/16 (779)[2] 25CDH2572-3A24 25CDH2972-3A24 25CDH3372-3A24 25CDH3772-3A /4 (2610) 100 3/4 (2559) 100 (2540) 34 11/16 (881)[2] 25CDH2576-3A24 25CDH2976-3A24 25CDH3376-3A24 25CDH3776-3A24 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-27
28 TRIPL UNITS - NOMINAL WITH 18 TRANSOM UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 62 (1575) 60 (1524) 59 1/4 (1505) 13 15/16 (354)[3] 74 (1880) 86 (2184) 110 (2794) 72 (1829) 84 (2134) 108 (2743) 71 1/4 (1810) 83 1/4 (2115) 107 1/4 (2724) 17 15/16 (455)[3] 21 15/16 (557)[3] 29 15/16 (760)[3] 25CDH2036N-3A18 25CDH2436N-3A18 25CDH2836N-3A18 25CDH3636N-3A18 25CDH2042N-3A18 25CDH2442N-3A18 25CDH2842N-3A18 25CDH3642N-3A18 25CDH2048N-3A18 25CDH2448N-3A18 25CDH2848N-3A18 25CDH3648N-3A18 25CDH2054N-3A18 25CDH2454N-3A18 25CDH2854N-3A18 25CDH3654N-3A18 80 (2032) 78 (1981) 77 1/4 (1962) 26 5/16 (668)[2] 13 1/4 (337) 74 (1880) 72 (1829) 71 1/4 (1810) 23 5/16 (592)[2] 13 1/4 (337) 68 (1727) 66 (1676) 65 1/4 (1657) 20 5/16 (515)[2] 13 1/4 (337) 62 (1575) 60 (1524) 59 1/4 (1505) 17 5/16 (440)[2] 13 1/4 (337) 56 (1422) 54 (1372) 53 1/4 (1353) 14 5/16 (364)[2] 13 1/4 (337) 25CDH2060N-3A18 25CDH2460N-3A18 25CDH2860N-3A18 25CDH3660N-3A18 86 (2184) 84 (2134) 83 1/4 (2115) 29 5/16 (745)[2] 13 1/4 (337) 25CDH2066N-3A18 25CDH2466N-3A18 25CDH2866N-3A18 25CDH3666N-3A18 92 (2337) 90 (2286) 89 1/4 (2267) 32 5/16 (821)[2] 13 1/4 (337) 25CDH2072N-3A18 25CDH2472N-3A18 25CDH2872N-3A18 25CDH3672N-3A18 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. N INDICATS NOMINAL SIZING. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-28
29 4WIDUNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 16 11/16 (424)[2] 20 11/16 (525)[2] 88 1/4 (2242) 86 1/4 (2191) 85 1/2 (2172) 16 1/16 (408)[4] 104 1/4 (2648) 102 1/4 (2597) 101 1/2 (2578) 20 1/16 (510)[4] 120 1/4 (3054) 118 1/4 (3004) 117 1/2 (2985) 24 1/16 (611)[4] 136 1/4 (3461) 134 1/4 (3410) 133 1/2 (3391) 28 1/16 (713)[4] 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (1391) 52 3/4 (1340) 52 (1321) 22 11/16 (576)[2] 25CDH CDH CDH CDH /4 (1492) 56 3/4 (1441) 56 (1441) 24 11/16 (627)[2] 25CDH CDH CDH CDH /4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 25CDH CDH CDH CDH /4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 25CDH CDH CDH CDH /4 (1797) 68 3/4 (1746) 68 (1727) 30 11/16 (779)[2] 25CDH CDH CDH CDH /4 (1899) 72 3/4 (1848) 72 (1829) 32 11/16 (830)[2] 25CDH CDH CDH CDH /4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 25CDH CDH CDH CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-29
30 4WIDUNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 16 11/16 (424)[2] 20 11/16 (525)[2] 152 1/4 (3867) 150 1/4 (3816) 149 1/2 (3797) 32 1/16 (814)[4] 25CDH CDH CDH /4 (1391) 52 3/4 (1340) 52 (1321) 22 11/16 (576)[2] 25CDH /4 (1492) 56 3/4 (1441) 56 (1441) 24 11/16 (627)[2] 25CDH /4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 25CDH /4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 25CDH /4 (1797) 68 3/4 (1746) 68 (1727) 30 11/16 (779)[2] 25CDH /4 (1899) 72 3/4 (1848) 72 (1829) 32 11/16 (830)[2] 25CDH /4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 25CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. UNIT MTS GRSS RQUIRMNTS FOR IRC COD. STAT AND LOCAL GRSS CODS MAY DIFFR. ALWAYS RFR TO LOCAL BUILDING CODS FOR COMPLT RQUIRMNTS. CHCK WITH LOCAL OFFICIALS TO NSUR COMPLIANC BFOR INSTALLING TH UNIT. S NOTS ON SINGL UNIT LVATIONS FOR SPCIFIC GRSS CAPABILITY. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-30
31 5WIDUNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 109 5/8 (2785) 107 5/8 (2734) 106 7/8 (2715) 16 1/16 (408)[5] 129 5/8 (3293) 127 5/8 (3242) 126 7/8 (3223) 20 1/16 (510)[5] 149 5/8 (3801) 147 5/8 (3750) 146 7/8 (3731) 24 1/16 (611)[5] 169 5/8 (4309) 167 5/8 (4258) 166 7/8 (4239) 28 1/16 (713)[5] 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 32 11/16 (830)[2] 70 3/4 (1797) 68 3/4 (1746) 68 (1727) 30 11/16 (779)[2] 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 62 3/4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 58 3/4 (1492) 56 3/4 (1441) 56 (1441) 38 3/4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 24 11/16 (627)[2] 54 3/4 (1391) 52 3/4 (1340) 52 (1321) 22 11/16 (576)[2] 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 16 11/16 (424)[2] 20 11/16 (525)[2] 25CDH CDH CDH CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-31
32 5WIDUNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 189 5/8 (4817) 187 5/8 (4766) 186 7/8 (4747) 32 1/16 (814)[5] 25CDH CDH /4 (984) 36 3/4 (933) 36 (914) 14 11/16 (373)[2] 25CDH /8 (4817) 187 5/8 (4766) 186 7/8 (4747) 32 1/16 (814)[5] 25CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH CDH /4 (2000) 76 3/4 (1949) 76 (1930) 34 11/16 (881)[2] 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 32 11/16 (830)[2] 70 3/4 (1797) 68 3/4 (1746) 68 (1727) 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 50 3/4 (1289) 48 3/4 (1238) 48 (1219) 16 11/16 (424)[2] 30 11/16 (779)[2] 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 27 11/16 (703)[2] 62 3/4 (1594) 60 3/4 (1543) 1543 (xxxx) 26 11/16 (678)[2] 58 3/4 (1492) 56 3/4 (1441) 56 (1441) 54 3/4 (1391) 52 3/4 (1340) 52 (1321) 20 11/16 (525)[2] 24 11/16 (627)[2] 22 11/16 (576)[2] 25CDH CDH LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. VALUS IN [] AR NUMBR OF DAYLIGHT OPNINGS PR UNIT. SCAL: 1/8 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-32
33 LVATION NOTS PICTUR UNITS LVATION DRAWINGS UTILIZ A LIMITD NUMBR OF PROJCTD LINS TO PRODUC A RUDIMNTARY DRAWING INTNDD TO B USD IN A SMALL GRAPHICAL SCAL. LVATIONS AR VIWD PRPNDICULAR FROM TH XTRIOR OF TH STRUCTUR. IF MOR DIMNSIONS AR NDD, US TH SCTION DRAWINGS FOR MOR COMPLT DPICTIONS. M.O. Brickmould M.O. Adams/Flat Casing Rough Opening Frame Size 24 7/8 ( 632 ) 27 7/8 ( 708 ) 21 3/8 ( 543 ) 17 3/4 (451) Masonry Openings for Brickmould, Flat & Adams Casing. Vertical measurements include sillnose. (Subtract 1/2 from Masonry Opening for Unit Size) ROUGH OPNING DIMNSIONS AR IN BOLD TXT. 27 1/16 ( 687 ) 28 9/16 ( 725 ) 24 3/4 ( 629 ) 24 ( 610 ) 20 3/8 ( 518 ) ## S SYMBOL LGND BLOW OUTSID OF FRAM. DAYLIGHT OPNING 25CDHP CDHP INDICATS W2500 CLAD DOUBL HUNG TRANSOM TH FIRST TWO NUMBRS INDICAT TH UNIT WIDTH BOOK COD TH LAST TWO NUMBRS INDICAT TH UNITS HIGHT GNRAL DOUBL HUNG TRANSOM NOTS LVATION SYMBOL LGND: 1. ALL UNITS SHOWN AR AVAILABL AS STATIONARY ONLY. 2. UNIT LVATIONS AR SHOWN WITHOUT XTRIOR TRIM. 3. DIMNSIONAL VALUS IN BRACKTS AR MILLIMTR CONVRSIONS. ## NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-33
34 PICTUR UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 14 3/4 (375) 12 3/4 (324) 12 (305) 6 3/4 (171) 20 3/4 (527) 18 3/4 (476) 18 (457) 12 3/4 (324) 26 3/4 (679) 24 3/4 (629) 24 (610) 18 3/4 (476) 32 3/4 (832) 30 3/4 (781) 30 (762) 24 3/4 (629) 38 3/4 (984) 36 3/4 (933) 36 (914) 30 3/4 (781) 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 34 3/4 (883) 44 3/4 (1137) 42 3/4 (1086) 42 (1067) 36 3/4 (933) 14 3/4 (375) 12 3/4 (324) 12 (305) 7 1/4 (184) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (527) 18 3/4 (476) 18 (457) 13 1/4 (337) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (679) 24 3/4 (629) 24 (610) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (832) 30 3/4 (781) 30 (762) 25 1/4 (641) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (984) 36 3/4 (933) 36 (914) 31 1/4 (794) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (1086) 40 3/4 (1035) 40 (1016) 35 1/4 (895) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP /4 (1289) 48 3/4 (1238) 48 (1219) 43 1/4 (1099) 44 3/4 (1137) 42 3/4 (1086) 42 (1067) 37 1/4 (946) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP4248 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. SCAL: 1/4 = 1 Note: levations shown DO NOT have exterior trim. For other Trim Options refer to the Unit Sizing, Rough Opening and Masonry Opening page. April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-34
35 PICTUR UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 14 3/4 (375) 12 3/4 (324) 12 (305) 6 3/4 (171) 20 3/4 (527) 18 3/4 (476) 18 (457) 12 3/4 (324) 26 3/4 (679) 24 3/4 (629) 24 (610) 18 3/4 (476) 32 3/4 (832) 30 3/4 (781) 30 (762) 24 3/4 (629) 38 3/4 (984) 36 3/4 (933) 36 (914) 30 3/4 (781) 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 34 3/4 (883) 44 3/4 (1137) 42 3/4 (1086) 42 (1067) 36 3/4 (933) 70 3/4 (1797) 68 3/4 (1746) 68 (1727) 63 1/4 (1607) 66 3/4 (1695) 64 3/4 (1645) 64 (1626) 59 1/4 (1505) 64 3/4 (1645) 62 3/4 (1594) 60 (1524) 55 1/4 (1403) 58 3/4 (1492) 56 3/4 (1441) 56 (1422) 51 1/4 (1302) 56 3/4 (1441) 54 3/4 (1391) 54 (1372) 49 1/4 (1251) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP4268 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-35
36 PICTUR UNITS UNIT SIZ ROUGH OPNING FRAM SIZ DAYLIGHT OPNING 14 3/4 (375) 12 3/4 (324) 12 (305) 6 3/4 (171) 20 3/4 (527) 18 3/4 (476) 18 (457) 12 3/4 (324) 26 3/4 (679) 24 3/4 (629) 24 (610) 18 3/4 (476) 32 3/4 (832) 30 3/4 (781) 30 (762) 24 3/4 (629) 38 3/4 (984) 36 3/4 (933) 36 (914) 30 3/4 (781) 42 3/4 (1086) 40 3/4 (1035) 40 (1016) 34 3/4 (883) 44 3/4 (1137) 42 3/4 (1086) 42 (1067) 36 3/4 (933) 90 3/4 (2305) 88 3/4 (2254) 88 (2235) 83 1/4 (2115) 78 3/4 (2000) 76 3/4 (1949) 76 (1930) 71 1/4 (1810) 74 3/4 (1899) 72 3/4 (1848) 72 (1829) 67 1/4 (1708) 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP CDHP * 25CDHP CDHP CDHP CDHP CDHP CDHP CDHP4288 LVATION SYMBOL LGND: VALUS IN () AR IN MILLIMTR CONVRSIONS. ##* NUMBR INDICATS DSIGN PRSSUR (DP) RATING WITH STANDARD GLAZING. ##** NUMBR INDICATS OPTIONAL DSIGN PRSSUR (DP) RATING. SCAL: 1/4 = 1 April 2013 JLD-WN reserves the right to change specifications without notice. Page 2-36
Gliding Windows Premium Vinyl
TABL OF CONTNTS Product Specifications... 6-2 QuickSpecGuide... 6-3 levations/sizes: 1/4 Scale 2 Wide Gliding Window... 6-4 3 Wide Gliding Window... 6-8 SashGlazingOptions:3 Scale... 6-10 Grilles & SDL
More informationPremium Double Hung Windows
gress Data The following opening specifications have been provided to assist you in determining compliance to gress codes based on BOCA and UBC code requirements as follows. ach criteria below must be
More informationGarden Windows Builders Vinyl
TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right
More informationSample Calculations...V-CR-12. Door and Window Typical Combinations... V-CR-12 Horizontal and Vertical Typical Combinations...
SECTION DIRECTORY General Information Definitions...V-CR- Design Considerations...V-CR- Composite Configurations...V-CR-4 Design Considerations and Examples for Typical Window and Door Combinations...V-CR-5
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationQuality Building Products for over 50 Years
Light Commercial Quality Building Products for over 50 Years Harvey Building Products is a leading manufacturer and distributor of high quality building products. We manufacture a complete line of superior
More informationWINDOW INSTALLATION GUIDE
WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationSIZE TABLES Wood and Aluminum-Clad Exteriors Double- and Single-Hung
Double- and Single-Hung Left Right Springline Arch Head Partial Arch Head Pella Architect Series single-hung windows are available in shapes shown above, and additional custom shapes per drawing. For specifications,
More informationReplacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin
Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product
More informationTundra Series Windows January 2016
Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing
More informationSun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
More informationSECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series
SECTION REFERENCE Size Ranges... 96 Existing Window Measurements... 96 Divided Light Patterns... 97 Window Details... 97 Joining Details... 97 Performance Data... 269 400 Series Windows TILT-WASH DOUBLE-HUNG
More informationINSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationFlexivent Windows (1952 to 1979)
Flexivent Windows (1952 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationDESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS
SECTION INCLUDES Metal Windows Vinyl/Aluminum Clad Wood Windows Solid Fiberglass and Vinyl Windows Wood Windows (Historic Preservation only) RELATED SECTIONS 02 83 00 Lead Paint Remediation 06 10 00 Rough
More informationCLAIM FORM APPENDIX. I. Photographs Identifying The Windows
CLAIM FORM APPENDIX I. Photographs Identifying The Windows The Settlement provides compensation for MIWD Products that are glazed with Glazing Tape and were manufactured or sold between July 1, 2000 and
More informationInstallation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows
Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read
More informationAstragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.
Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient
More informationBalance Shoe and Balance Replacement
and Replacement for E-Series Double-Hung and Single-Hung Windows Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information and/or guides visit www.eaglewindow.com Please
More informationWindows Vintage FUSION-WELDED VINYL TILT WINDOW SYSTEM GET THE VINTAGE ADVANTAGE...
Windows Vintage FUSION-WELDED VINYL TILT WINDOW SYSTEM GET THE VINTAGE ADVANTAGE... B.F. Rich, a Delaware based USA manufacturer, has been an industry leader producing windows and doors since 1957. Our
More informationPremium Vinyl Windows and Doors for Replacement Applications
3042 MV Replacement 8/6/08 11:48 AM Page 1 Premium Vinyl Windows and Doors for Replacement Applications 3042 MV Replacement 8/6/08 11:48 AM Page 2 What s The Benefit Of ModernView Vinyl Windows? They ll
More informationImportant Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationBasement Window Installation Guide Hopper and Sliding
Basement Window Installation Guide Hopper and Sliding americancraftsmanwindows.com Project Requirements: Installation must comply with all applicable building codes. Existing window frame, wall and weatherresistant
More informationSeries 602 MAGNUM Sliding Window DESIGNER SERIES
Series 602 DESIGNER SERIES DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 602 KEY EATURES / PERORMANCE CHARACTERISTICS Scale: NOT TO SCALE Designed to complement our existing high quality
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationSize & Range. for windows & doors. Company
Size & Range for windows & doors A Company B General information windows and doors Sizes This catalogue contains all Airlite s standard sizes for windows and doors. These are the ones that we make every
More informationGlossary. Argon: An inert, nontoxic gas used in insulating glass units to reduce heat transfer.
Glossary AAMA : American Architectural Manufacturers Association, a national trade association that established voluntary standards for the window, door and skylight industry. Argon: An inert, nontoxic
More informationVinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
More informationInstallation Guide for Andersen Architectural Wood Inswing Entry Doors
Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are
More informationOpen Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows
Open Up Your Space, Add Light Series 2050 and Series 2050i Garden Windows Series 2050 Garden Window The Series 2050 standard garden window has an outstanding reputation for its distinctive design and excellent
More informationA site plan or floor plan clearly identifying the location(s) of all new replacement window(s)
WINDOW REPLACEMENT GUIDELINES Community Development Planning & Building 2263 Santa Clara Ave., Rm. 190 Alameda, CA 94501-4477 alamedaca.gov 510.747.6800 F: 510.865.4053 TDD: 510.522.7538 Hours: 7:30 a.m.
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) IMPORTANT INFORMATION AND GLOSSARY ROUGH OPENINGS
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nail fin. Not all window types may be installed into every wall
More informationModernView. The Brickmold Designer Series. The Brickmold Designer Series. TheBrickmoldDesignerSeries. Outside the ordinary.
Page 1 rickmold rickmoldseries Outside the ordinary. New Construction Double-Hung & Single-Hung Vinyl Windows 300 100 Our windows are NFRC-rated, certified, and labeled for both U-factor and solar heat
More informationIMPORTANT! READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Step 1:
IMPORTANT! READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION. Thank you for purchasing your new replacement windows from Great Lakes Window. The following instructions will help remove the old windows
More informationWINDOW REPAIR AND REPLACEMENT
WINDOW REPAIR AND REPLACEMENT PRESERVATION AND DESIGN GUIDELINES D.C. HISTORIC PRESERVATION REVIEW BOARD Window Repair and Replacement Preservation and Design Guidelines Table of Contents Introduction
More informationSun Vinyl New Construction Windows Homeowner's Warranty
Sun Windows Sun Vinyl New Construction Windows Homeowner's Warranty Vinyl Sun Windows, Inc. warrants for a period of 2 years that the quality of workmanship and materials of vinyl items shall be free from
More informationINSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW
Vinyl Windows and Doors Manufactured by Pella Corporation INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW Lea las instrucciones en español en el reverso.
More informationEnhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel
Enhancing The Beauty And Value Of Your Home. Exclusive Patio Door Collection. NORTH STAR PATIO DOOR COLLECTION Two-Panel Three-Panel Four-Panel Since 1985 North Star has been an industry leader in the
More informationHYDRAULIC FREIGHT ELEVATOR PACKAGES
HYRAULIC FRIGHT LVATOR PACKAGS Leistritz offers its customers a complete selection of freight elevators to meet a wide range of heavy-duty, freight handling applications. In addition to the cylinders,
More informationMarch 14, 2007. Installation of Bay, Bow and Garden Windows
March 14, 2007 Re: Installation of Bay, Bow and Garden Windows Attached are the Atrium Companies, Inc recommendation for the installation of bay, bow and garden windows. These instructions were developed
More informationIn the Fall 2002 issue of HHE News I examined
Choosing Replacement Windows 1 For Your Home Mark Pierce In the Fall 2002 issue of HHE News I examined reasons for, and against, replacing older windows with new, energy efficient windows. That article
More informationTuscany Series Vinyl Replacement Windows 3-Part Specification
PART 1 - GENERAL SECTION 08 53 13 (Masterformat 2004 Edition) VINYL WINDOWS Tuscany is optimized for replacement applications but since it is available in multiple frame styles including nail-on fin frame,
More informationTEST REPORT. Report No.: B3404.01-801-47. Rendered to: CROFT, LLC. Magnolia, Mississippi. PRODUCT TYPE: Aluminum Single Hung Window SERIES/MODEL: 95
Architectural Testing TEST REPORT Report No.: B3404.01-801-47 Rendered to: CROFT, LLC. Magnolia, Mississippi PRODUCT TYPE: Aluminum Single Hung Window SERIES/MODEL: 95 SPECIFICATION: AAMA/WDMA/CSA 101/I.S.2/A440-08,
More informationInstallation Window Building In Details
Installation Window Building In Details INSTALLATION Photo courtesy of Rowe Aluminium DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 INSTALLATION Installation Replaces: Scale: NOT TO SCALE Vantage snap-on couplers
More informationVinyl Greenhouse Window Page 2 of 6 New Contruction Installation Instructions
New Construction Installation Instructions EPLACEMENT Installation Instructions Page 2 of 6 New Contruction Installation Instructions 1. Frame rough opening equal to window call out size. ough opening
More informationProduct information. Schüco Window AWS 65. 03.2009/Web Schüco AWS 65 1-11
Schüco Window AWS 65 The basic window system, Schüco Window AWS 65, with a comprehensive range for imaginative designs, is particularly suitable for block constructions with a basic depth of 65 mm. Features
More informationSERIES 3000/4000 DOUBLE SLIDER AND DOUBLE HUNG WINDOWS. Craftsmanship. Style. Performance.
SERIES 3000/4000 DOUBLE SLIDER AND DOUBLE HUNG WINDOWS Craftsmanship. Style. Performance. A Double Advantage Double slider and double hung window sashes both open for greater control of air movement The
More informationBungalow. Essential Elements. Prominent porch columns,
Bungalow Essential Elements Prominent porch columns, especially square or battered piers Deep porches One or one and a half stories Roof that is either hipped with low pitch or gabled with moderate to
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows without Nailing Fin (JII011) ImPOrTANT INFOrmATION & GlOssAry. rough OPeNINGs
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for vinyl windows without a nailing fin (including finless, flush fin and flange). Read these instructions
More informationGlossary. 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes
Glossary 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes 1/4 1/2 1/4 - Configuration of a vent-fixed-vent (xox) window in which the vents
More information4 5/16 Subframe Installation
4 5/16 Subframe Installation The subframe system is a great installation tool for installing windows in masonry conditions. Typically subframes are used in masonry openings so that windows can be anchored
More informationSeries 456 Commercial Awning Window
Commercial Awning Window COMMERCIAL SERIES Photo courtesy of Hanlon Windows Australia DATE: MAY 2013 REPLACES: MARCH 2008 COMMERCIAL SERIES KEY FEATURES/PERFORMANCE CHARACTERISTICS Scale: not to scale
More information10, 40, 60, 80 and Additional Styles. Series. Series. Series. Series VINYL REPLACEMENT WINDOWS
Series 10, Series 40, Series 60, Series 80 and Additional Styles VINYL REPLACEMENT WINDOWS The Lansing Difference For more than 50 years, Lansing Building Products has set the standard for exceptional
More informationQuality Windows And Doors. Great Service. Exceptional Value.
Quality Windows And Doors. Great Service. Exceptional Value. As A Matter Of Fact, Our Windows And Doors Are The Best. Since 1985 North Star has been an industry leader in the manufacture of attractive
More informationSeries 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX Fixed Series 3502 retains an AAMA
More informationInstallation Instructions
Installation Instructions READ BEFORE INSTALLING UNIT For Low Profile Window Air Conditioner INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Follow each step
More informationvinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? Standard Features easy, trouble-free operation. window material formulated and
vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? We are confident that we carry a style and size to suit your application. You can be sure that your investment will add value to your home,
More informationAccessory Windows. Replacement and New Construction
Accessory Windows Replacement and New Construction Casement Things couldn t be easier with our beautiful and functional vinyl casement windows. There s no need to stretch to reach a top lock because the
More informationInsulView Window Installation Instructions
InsulView Window Installation Instructions 1. The entire building is normally sheeted with the 2" 2 ½ OR 3 wall panel and the windows installed at a later time. A window retrofit of an existing building
More informationSeries 5100 Vinyl Replacement
Series 5100 Vinyl Replacement Windows Series 5100 For remodeling projects which call for the classic styling of double hung or the convenience of sliding windows, look no further than the 5100 series for
More informationHMMA 810 HOLLOW METAL DOORS HOLLOW METAL MANUAL -87 NAAMM STANDARD FOURTH EDITION METAL DOORS & FRAMES NAAMM 2 NAAMM 2 METAL DOORS & FRAMES
HOLLOW METAL MANUAL NAAMM STANDARD HMMA 810-87 8d METAL DOORS & FRAMES NAAMM 2 87 HOLLOW METAL HOLLOW METAL DOORS FOURTH EDITION NAAMM 2 87 8d METAL DOORS & FRAMES A Division of NATIONAL ASSOCIATION OF
More informationEggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art
D O O R F R A M E S Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers Industries
More informationIn s ta l l at i o n o f Yo u r
In s ta l l at i o n o f Yo u r Replacement Windows Renewal by Andersen is backed by Andersen Corporation s 100+ years of window-making knowledge and expertise. Every day we take pride in helping homeowners
More informationProduct Feature Guide 3/4 Insulated Glass 6000 4000 2000 1000
The Falcon eries... ettin Product Feature Guide 3/4 Insulated Glass 6000 4000 2000 1000 Clear Emax PLus Emax Ultra * Bronze Tint Grey Tint bscure Glass Tempered Glass pacer ystem Intercept uperpacer Vinyl
More informationGUIDELINES FOR REHABILITATION OF TRADITIONAL COMMERCIAL BUILDINGS DESIGN GUIDELINES
GUIDELINES FOR REHABILITATION OF TRADITIONAL COMMERCIAL BUILDINGS DESIGN GUIDELINES PAGE 13 DESIGN GUIDELINES The following design guidelines have been developed to guide appropriate design in the Downtown
More informationHow to Measure for Exterior Shutters
Tools you may need: Measuring Tape Pencil Paper Ladder How to Measure for Exterior Shutters Measuring your windows properly is an important step to ensure your installation goes both smoothly and that
More informationSECTION REFERENCE. Awning Windows. Casement & 400 Series
400 Series Casement & Awning Windows SECTION REFERENCE Alignment Grid...38 39 Tables of Sizes...40 44 Opening Specifi cations...45 48 Divided Light Patterns... 50 Window Details... 51 52 Joining Details...
More informationTHE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS
THE ULTIMATE HIGH PERFORMANCE REPLACEMENT WINDOWS AND PATIO DOORS EXCLUSIVELY BY NORANDEX Put our reputation in your home. At Norandex, we are proud to be a wellrespected leader in the home improvement
More informationEnjoy the view. THE AMCRAFT GRAND ESTATES VINYL WINDOW AND PATIO DOOR COLLECTION
Enjoy the view. THE AMCRAFT GRAND ESTATES VINYL WINDOW AND PATIO DOOR COLLECTION Grand Estates Windows & Doors Home building and remodeling is what you make it and Amcraft makes it easy. For over two decades
More informationSash or Balancer Replacement Guide
or Replacement Guide for Andersen 200 Series Tilt-Wash Double-Hung Windows or Replacement Guide Read all instructions carefully before attempting this procedure. If you have any questions about your ability
More informationQuality Windows And Doors. Great Service. Exceptional Value.
Quality Windows And Doors. Great Service. Exceptional Value. As A Matter Of Fact, Our Windows And Doors Are The Best. Since 1985 North Star has been an industry leader in the manufacture of attractive
More informationThe Cabin Shell Series
The Columbia 816 sq ft 1 Story 2 Bedrooms 1 Bathroom Effective June 2014 The Columbia EXAMPLE FINISH STANDARD FLOORPLAN Options Pricing Description Retail UoM Deck Wood Floor - Exterior 2x6 Pressure Treated
More informationSECTION 08 53 13 VINYL WINDOWS. A. The General Conditions, Supplementary Conditions, and Division 01 - Requirements apply.
SECTION 08 53 13 VINYL WINDOWS PART 1 - GENERAL 1.1 CONDITIONS AND REQUIREMENTS A. The General Conditions, Supplementary Conditions, and Division 01 - Requirements apply. 1.2 SECTION INCLUDES A. Double
More information1-1. Casement and Awning Window
Casement and Awning Window Casement Low maintenance exterior Easy to operate Slim frame and sash profile maximize the field of view Excellent for creating window combinations, as well as bays and bows
More informationUL / FM B-1 FIRE PROTECTION PRODUCTS MUELLER 2300 SERIES RESILIENT WEDGE GATE VALVE DESIGN FEATURES
UL / FM MULLR 2300 SRIS RSILINT WDG GAT VALV DSIGN FATURS SCTION Rev. 3-11 Mueller 2300 Series Resilient Wedge Gate Valves Mueller Resilient Wedge Gate Valves have features to make them easier to operate
More informationEagle Talon RetroFit Double-Hung and Picture Window Measuring Guidelines
Eagle Talon RetroFit and To assist you with measuring for Eagle Talon RetroFit products, we ve included typical section details of double-hung products comparable to what may be in your home. Please read
More informationILLUSION FRAMELESS SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
PREPARATION Approximate Installation Time: Tools Required for Installation: 60 minutes Hacksaw Electric Drill 3/16 Masonry Bit Pencil/Felt tip pen Safety Glasses Measuring Tape Masking Tape Standard Screw
More informationSidelights & Transoms for A-Series Hinged Doors
Sidelights & Transoms for A-Series Hinged Doors Parts Catalog Main Menu Section TOC Search What s in This Section Sidelights & Transoms............................................. Page 3 Parts Illustration...........................................................
More informationEarthwise 143 Window Series
Earthwise 143 Window Series Showcase brochure 12pg.indd 1 The Wise Choice Earthwise is a selective national group of window manufacturing fabricators who produce the same high quality vinyl window system.
More informationWINDOW PANNING AND TRIMS
OCTOBER, 2010 PANNING AND TRIMS GENERAL INFORMATION 1 EXTERIOR PANNING Panning is primarily used to cover the perimeters of existing building openings prior to the installation of replacement windows.
More informationGARDEN WINDOW GLAZING AND DE-GLAZING INSTRUCTIONS
GARDEN WINDOW GLAZING AND DE-GLAZING INSTRUCTIONS DE-GLAZING 1.) If there is any PVC cement covering the joints where external glazing bead strips meet, cut through the cement with a utility knife. 2.)
More informationWindow replacement guidelines
Window replacement guidelines Although the Springfield Historical Commission (SHC) recommends that historic windows be restored and supplemented with unobtrusive storm windows, it recognizes that there
More informationBLOWING DUST INFILTRATION TEST REPORT. Rendered to: TEX-STAR WINDOWS, INC. PROJECT: Blowing Dust Test SERIES: 3000 Double Hung Window
Architectural Testing BLOWING DUST INFILTRATION TEST REPORT Rendered to: TEX-STAR WINDOWS, INC. PROJECT: Blowing Dust Test SERIES: 3000 Double Hung Window Report No: 99462.01-801-44 Test Completion Date:
More informationMIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Report No.: B8049.01-401-18. Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida
Architectural Testing MIAMI-DADE COUNTY PERFORMANCE TEST REPORT Report No.: B8049.01-401-18 Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida PRODUCT TYPE: Aluminum Storefront with Double Doors SERIES/MODEL:
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationWINDOWS AND PATIO DOORS
LAKE BARRINGTON COMMUNITY HOMEOWNERS ASSOCIATION 64 Old Barn Road Lake Barrington, Illinois 60010 Phone: 847-382-1660 Fax: 847-382-2731 HOMEOWNER APPLICATION FOR ARCHITECTURAL REVIEW WINDOWS AND PATIO
More informationRAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com
SERIES 900 CASEMENT WINDOW Page 1 of 6 RAM Industries 8600 Commerce Park Dr Houston, TX 77036 Tel: 281-495-9056 Fax: 281-495-6778 www.ramwindows.com SPECIFICATION GUIDE SERIES 900 CASEMENT WINDOW RAM Industries
More informationSERIES 238 WINDOWS. NOTE: Read instructions completely before attempting any installation.
1 Installation Instructions SERIES 238 WINDOWS Page 2: Page 3-4: Page 5: Page 6: Page 7: Opening Preparation and Wood Buck Installation Installation Instructions for Series 238 WINDOWS Figure 1: Buck preparation
More informationHistoric Preservation Certification Application Part 2 343-345 Main Street West South Haven, Vermont NPS Project No. 12345
Exterior Features 1 site and drainage 2 foundation 3 wood siding and trim 4 exterior doors 5 windows / storm windows 6 porches front and rear 7 chimneys 8 roofing Interior Features 9 frame 10 basement
More informationSpecifying Windows. Performance Standards
1 Specifying Windows and ddoors Using Performance Standards 2 This program is registered with the AIA/CES for continuing professional education. As such, it does not include content that may be deemed
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationThis handout is a guide only and does not contain all of the requirements of the Minnesota State Building Code or city ordinances.
Basement Finishing Guide Community Development Department Building Inspections Division 5200 85 th Avenue North / Brooklyn Park, MN 55443 Phone: (763) 488-6379 / Fax: (763) 493-8171 6/15 www.brooklynpark.org
More informationBarewood Octagon and Elongated Windows Installation Instructions
Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and
More informationSECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationCombination Unit 5'6" Windows a i o P t
for Andersen 5'6" Double-Hung Venting s Windows a i o P t o rs D o Congratulations You have just purchased one of the many fine Andersen products. For ease of assembly and installation and continued enjoyment
More information