Bulletin IDF11 MAKE-UP AIR. Model: IDF High Capacity, Indirect-Fired, Make-Up Air Units

Transcription

1 Bulletin 11 MAKE-UP AIR Model: High Capacity, Indirect-Fired, Units

2 Introduction TM Title 2

3 TM Table of Contents Series Model: 75-1,200 MBH Capacity ,800 CFM Capacity Introduction...4 Features & Benefits...4 Performance Data...5 Dimensional Data of Base Unit...6 Dimensional Data of Options...7 Listings and Certifications PennBarry units are ETL listed for the furnace assembly only. ETL certified duct furnace section to UL 1995/ CSA C22.2 No. 236 Heating and Cooling Equipment and UL 795 Commercial - Industrial Gas Heating Equipment for electrical and mechanical safety. PennBarry units are also certified by the Canadian Standard Association. C.S.A. (Canadian Standards Association) design certification for use in both the US and Canada to the ANSI Z latest revision, standard for Gas Unit Heater and Gas-Fired Duct Furnaces for safe operation, construction, and performance. PennBarry reserves the right to make changes at any time, without notice, to models, construction, specifications, options, availability, etc. This bulletin illustrates the appearance of PennBarry products at the time of publication. To view the latest updates, visit PennBarry at 3

4 Features TM Value-Driven Systems Indirect-fired technologies meet specific customer preferences and are common choices for many commercial, institutional and industrial applications in which the higher capacities, displacement ventilation and fuel efficiency of direct-fired systems are not required. PennBarry s Series indirect-fired heating and ventilating systems are available in horizontal models for either indoor or outdoor installation. Like most indirect-fired systems, these units are 80% energy efficient and use advanced heat exchangers in the furnace section to provide building supply air at set temperatures. Depending on the application, these systems may be gravity vented or power-vented for exhausting combustion gases to the outdoors. Many of the same design features found on PennBarry direct-fired units can be found on our indirect-fired units. These include motorized inlet dampers, easy-to-service filters, long-life motor and fan combinations, single-point gas and electrical connections, ETL/CSA certifications, advanced control systems and much more. PennBarry s Series indirect-fired heating and ventilating systems are available with heating capacities from 75 to 1,200 MBH input and airflow capacities from 600 to 14,800 CFM. PennBarry is committed to providing the best available value in its indirect-fired heating and ventilating systems. This includes emphasizing durable construction and reliable operation in the range of standard features. It also includes offering a wide choice of optional features and accessories for meeting precise application requirements. Standard Features Indoor & Outdoor Designs Durable Horizontal Cabinets Choice of Discharge Configurations Weather-Resistant, Heavy-Gauge Aluminized Steel Construction Fan & Motor Vibration Isolation Aluminized Steel Heat Exchanger & Burner Combination Combustion Air/Exhaust Vent Cap Durable Two-Coat Paint Finish (Owner-Matched Colors at No Extra Cost) Fan Bearings rated to a Minimum of 100,000 Hours (L-10 Life) 100% Factory Testing Two-Year Parts & 90-Day Labor Limited Warranty Optional Features & Accessories Power Exhaust Stainless Steel Heat Exchanger, Burner and/or Drip Pan Exhaust Vent Extensions (Indoor Models) Separated Combustion (Indoor Models) Inlet Hood or Louvered Inlet Plenum Insulated Cabinet (Not Including Duct Furnace Section) Multiple Filtering Choices Motorized Inlet or Discharge Dampers Full or Duct Curb, Flat or Pitched Vibration Isolation (Internal or External) Motor Belt Guards Service Platforms (OSHA Compliant) Three and Four-Way Discharge Diffusers 100% OA, 100% RA, Fixed OA/RA or Modulating OA/RA Cooling Options (Evaporative or DX/CW Coils) Power Vented, Separated Combustion, Indoor Unit Gravity Vented, Outdoor Unit 4

5 TM Performance Data Sizing Blower/ Motor Cabinet Furnace Qty. Furnace Size Used BTU/Hr Input BTU/Hr Output Unit Temperature Rise Through Unit ( F) ,000 60,000 2,778 2,222 1,852 1,587 1,389 1,235 1,111 1, ,000 80,000 3,704 2,963 2,469 2,116 1,852 1,646 1,481 1,347 1, , ,000 4,630 3,704 3,086 2,646 2,315 2,058 1,852 1,684 1, , ,000 5,556 4,444 3,704 3,175 2,778 2,469 2,222 2,020 1, , ,000 6,481 5,185 4,321 3,704 3,241 2,881 2,593 2,357 2, , ,000 7,407 5,926 4,938 4,233 3,704 3,292 2,963 2,694 2, , ,000 8,333 6,667 5,556 4,762 4,167 3,704 3,333 3,030 2, , ,000 N/A N/A N/A N/A 8,333 7,407 6,667 6,061 5, , ,000 9,259 7,407 6,173 5,291 4,630 4,115 3,704 3,367 3, , ,000 11,111 8,889 7,407 6,349 5,556 4,938 4,444 4,040 3, , ,000 N/A N/A N/A N/A 9,259 8,230 7,407 6,734 6, , ,000 N/A N/A N/A N/A 11,111 9,877 8,889 8,081 7, , ,000 12,963 10,370 8,642 7,407 6,481 5,761 5,185 4,714 4, , ,000 14,815 11,852 9,877 8,466 7,407 6,584 5,926 5,387 4, , ,000 N/A N/A N/A N/A 12,963 11,523 10,370 9,428 8, , ,000 N/A N/A N/A N/A 14,815 13,169 11,852 10,774 9,877 Blower/ Motor Cabinet Furnace Qty. Furnace Size Used BTU/Hr Input BTU/Hr Output Unit Temperature Rise Through Unit ( F) ,000 60, ,000 80,000 1,235 1,140 1, , ,000 1,543 1,425 1,323 1,235 1,157 1,089 1, , ,000 1,852 1,709 1,587 1,481 1,389 1,307 1,235 1,170 1, , ,000 2,160 1,994 1,852 1,728 1,620 1,525 1,440 1,365 1, , ,000 2,469 2,279 2,116 1,975 1,852 1,743 1,646 1,559 1, , ,000 2,778 2,564 2,381 2,222 2,083 1,961 1,852 1,754 1, , ,000 5,556 5,128 4,762 4,444 4,167 3,922 3,704 3,509 3, , ,000 3,086 2,849 2,646 2,469 2,315 2,179 2,058 1,949 1, , ,000 3,704 3,419 3,175 2,963 2,778 2,614 2,469 2,339 2, , ,000 6,173 5,698 5,291 4,938 4,630 4,357 4,115 3,899 3, , ,000 7,407 6,838 6,349 5,926 5,556 5,229 4,938 4,678 4, , ,000 9,259 8,547 7,937 7,407 6,944 6,536 6,173 5,848 5, , ,000 11,111 10,256 9,524 8,889 8,333 7,843 7,407 7,018 6, , ,000 4,321 3,989 3,704 3,457 3,241 3,050 2,881 2,729 2, , ,000 4,938 4,558 4,233 3,951 3,704 3,486 3,292 3,119 2, , ,000 8,642 7,977 7,407 6,914 6,481 6,100 5,761 5,458 5, , ,000 9,877 9,117 8,466 7,901 7,407 6,972 6,584 6,238 5, ,050, ,000 12,963 11,966 11,111 10,370 9,722 9,150 8,642 8,187 7, ,200, ,000 14,815 13,675 12,698 11,852 11,111 10,458 9,877 9,357 8,889 5

6 Dimensional Data for Base Unit TM Plan View (5) Duct Furnace Configurations to Select From (Note: Cannot Mix & Match - Only (1) Style Can Be Used on a Unit) (5) Duct Furnace Configurations to Select From (Note: Cannot Mix & Match - Only (1) Style Can Be Used on a Unit) Control Side View Note: When Using Multiple Furnaces (450 MBH - 1,200 MBH) - Add Each Furnace Section Length (ie: 700 MBH Input = (2) 350 MBH furnaces - using style (PI) - add 33.5 x 2 units = 67 ) Dimensional Data Blower/ Motor Cabinet Gas Pipe Size Dimensions in Inches A B C D E F G J L M N P 075 1/ / /4 33 1/ /4 36 1/8 14 1/ /2 34 1/2 36 1/ / /4 33 1/ /4 36 1/8 14 1/ /2 38 3/4 36 1/ / / /4 36 1/8 14 1/ /2 40 7/8 40 1/ / /8 37 1/ /4 40 1/8 14 1/ /4 43 7/8 40 1/ / /8 37 1/ /4 40 1/8 15 1/ /4 55 3/8 40 1/ / /8 37 1/ /4 40 1/8 18 3/8 6

7 TM Dimensional Data for Options Plan View Control Side View Dimensional Data Blower/ Motor Cabinet Dimensions in Inches A B C D E F H J K L M N P R / / / /2 36 1/ / /4 9 1/ /4 36 1/ / /8 8 1/ /8 40 1/ / /16 6 1/ /8 40 1/ / /16 4 1/ /8 40 1/ /16 4 1/

8 2-Year Limited Manufacturer Warranty TM Products Covered PennBarry Fans and Ventilators (each, a PennBarry Product ) Two Year Limited Warranty For Model PennBarry warrants to the original commercial purchaser that the PennBarry Products will be free from defects in material and workmanship for a period of two (2) years from the date of shipment. Exclusive Remedy PennBarry will, at its option, repair or replace (without removal or installation) the affected components of any defective PennBarry Product; repair or replace (without removal or installation) the entire defective PennBarry Product; or refund the invoice price of the PennBarry Product. In all cases, a reasonable time period must be allowed for warranty repairs to be completed. What You Must Do In order to make a claim under these warranties: You must be the original commercial purchaser of the PennBarry Product. You must promptly notify us, within the warranty period, of any defect and provide us with any substantiation that we may reasonably request. The PennBarry Product must have been installed and maintained in accordance with good industry practice and any specific PennBarry recommendations. Exclusions These warranties do not cover defects caused by: Improper design or operation of the system into which the PennBarry Product is incorporated. Improper installation. Accident, abuse or misuse. Unreasonable use (including any use for non-commercial purposes, failure to provide reasonable and necessary maintenance as specified by PennBarry, misapplication and operation in excess of stated performance characteristics). Components not manufactured by PennBarry. Limitations In all cases, PennBarry reserves the right to fully satisfy its obligations under the Limited Warranties by refunding the invoice price of the defective PennBarry Product (or, if the PennBarry Product has been discontinued, of the most nearly comparable current product). PennBarry reserves the right to furnish a substitute or replacement component or product in the event a PennBarry Product or any component of the product is discontinued or otherwise unavailable. PennBarry s only obligation with respect to components not manufactured by PennBarry shall be to pass through the warranty made by the manufacturer of the defective component. General The foregoing warranties are exclusive and in lieu of all other warranties except that of title, whether written, oral or implied, in fact or in law (including any warranty of merchantability or fitness for a particular purpose). PennBarry hereby disclaims any liability for special, punitive, indirect, incidental or consequential damages, including without limitation lost profits or revenues, loss of use of equipment, cost of capital, cost of substitute products, facilities or services, downtime, shutdown or slowdown costs. The remedies of the original commercial purchaser set forth herein are exclusive and the liability of PennBarry with respect to the PennBarry Products, whether in contract, tort, warranty, strict liability or other legal theory shall not exceed the invoice price charged by PennBarry to its customer for the affected PennBarry Product at the time the claim is made. 8

9 TM Introduction Title 9

10 Other PennBarry Products Centrifugal Products Domex Fumex Zephyr Dynamo Centrifugal Kitchen Hood Centrifugal Ceiling and Inline Fans Centrifugal Blowers Roof Exhausters Roof Exhausters Centrex Inliner LC Dynafan ESI Fume Exhaust Centrifugal Inline Fan Low Contour Centrifugal Efficient Silent Curb Mounted Roof Exhausters Inline Fan Centrifugal Fans Axial Gravity Products Breezeway Hi-Ex Tubeaxial Vaneaxial Propeller Wall Fan Power Roof Ventilator Inline Fans Inline Fans Powered Airette Airette Domex Axial Axcentrix Axial Roof Ventilators Gravity Intake/Relief Hood Axial Roof Ventilators Bifurcator Fan For more information, contact your local PennBarry Sales Representative or visit us at PennBarry All Rights Reserved.