MONITORS & CONTROLS GPS Speed Sensor

Transcription

1 106 MONITORS & CONTROLS GPS Speed Sensor The Astro II GPS Speed Sensors are a direct replacement for magnetic wheel speed sensors or radars and can interface to most brands of monitors and controllers. The magnetic mount bracket is standard and allows for quick installation and easy transfer from one vehicle to another. Not affected by crop canopies or adverse ground conditions. Astro II for Micro-Trak Astro II for All Raven Astro II for TeeJet Part# Price Astro II $ Part# Price Astro II $ Part# Price Astro II $ ASTRO II FOR OTHER MONITORS AND CONTROLS Astro II for MT 3000/5000 $ Astro II for Old Style Calc-An-Acre $ Astro II for Dickey-John 4 pin AMP $ Astro II for Dickey-John Packard $ Astro II for Magnavox / Phillips $ The Astro includes 2 red status lights on the interface module: POWER: turns on when power is applied to the unit. Valid GPS: blinks when the GPS receiver is working but has not yet acquired satellites. Once a satellite fix has been been achieved, it will be on steadily. If the GPS system fails, the light will turn off. Typical Startup Times: Sky search to acquire almanac = 5 minutes Cold Start = 2.5 minutes Warm Start = 30 seconds ASTRO II SPEED CAL NUMBERS Speed Console Type Astro II Cal Micro-Trak SodPro II, ProPlant II, ProSeed, GSC-1000, MT-3405D, MT-NH3 II, SprayMate II, Calc-An-Acre II, FlowTrak II, MT-2405F II, MT3405F II, RoadMaster MT-NH3, SprayMate, MT-403/MT-400, Calc-An-Acre LR, FlowTrak LR, MT-2405F, MT-3405F, SodPro, AutoTrol, MT-9000 Speed-O-Meter MT-3000/MT All Raven Calc-An-Acre 84C, FlowTrak 84C/FT96C Mid-Tech ARC Dickey-John AMP TeeJet TeeJet Grimes, IA - (800)

2 MONITORS & CONTROLS 107 MT3405-F-II Controllers MT3405-F-II Kit $1, *Kit Includes: Console with 5 boom wiring, 1 Servo Valve & 3/4 Flow Meter, LESS SPEED KIT Old Part Number - MT3405-LS The MT-3405F II offers a NEW dual display that provides the target application rate in one display, the second display allows the option to select between several monitored display functions: speed, distance, tank level, flow rate per minute and area per hour plus 3 separate gallon counters and acre counters with independant resets. STANDARD FEATURES On-the-go rate adjustment Push-button auto/manual feature for spot treatments Minimum flow feature to ensure proper application pattern as ground speed slows to extremes Precise rate control regardless of field conditions Solenoid and ball valve compatible Flow based control Controls electric and hydraulic valves/motors NH3 compatible Optional flowmeter kits and control valve kits Compatible with the Astro series of GPS-based speed sensors and radar ground speed sensors Can be used with EPD (Electric Pump Driver) MISC. PARTS Flow, Run/Hold Servo Boom 1 (Harness) $ Booms 2 & 3 Relief (Harness) $ Booms 4 & 5 (Harness) $ Owners Manual $ MT3405-F-II Console Mounting Kit $ MT3405-F-II Console $1, Power Cable Kit $ FLOW METER KITS FM500 (1/2 ).5-5 GPM $ FM750P (3/4 ) 2-40 GPM - Poly $ FM750SS (3/4 ) 2-40 GPM - Stainless $ FM100SS (1 ) GPM - Stainless $ FM270 (2 Flange) GPM $ FM (2 Flange) GPM $ EXTENSION CABLES M/P 3 Pin Extension Cable $ M/P 3 Pin Extension Cable $ M/P 3 Pin Extension Cable $ M/P 3 Pin Extension Cable $ M/P 3 Pin Extension Cable $95.95 SPEED PARTS Speed Sensor Cable $ Wheel Speed Sensor Kit $ Drive Shaft Speed Sensor Kit $ Run/Hold Kit $ Astro II GPS Speed Sensor for MT $ SERVO VALVE /2 200 Series Flanged $ Series Flanged $ Electric Servo / New Style Fits All $ SERVO EXTENSION CABLES Pin Servo Extension Wire $ Pin Servo Extension Wire $ Pin Servo Extension Wire $ Pin Servo Extension Wire $ Pin Servo Extension Wire $ MAIN HARNESS EXTENSIONS Pin MT Extenstion $ Pin MT Extenstion $ Pin MT Extenstion $ Pin MT Extenstion $ Pin MT Extenstion $ INTERFACES FOR EXISTING RADARS: In-Cab JD 2 Pin M/P $ Dickey-John AMP Connector $ Dickey-John Ford Connector $ Magnavox / Phillips Connector $ Raven $ John Deere M/P with Y-Cable $ DSA Interface Kit - For existing radar $ that has own power Grimes, IA - (800)

3 108 MONITORS & CONTROLS The SprayMate II proves again that you don t need to spend a lot to get accurate application control. It automatically maintains a preset application rate and can be used for both chemical and NH3 application. Features the same solid, space-saving design of the new Calc-An-Acre and Flow-Trak STANDARD FEATURES On-the-go rate adjustment in Auto control mode Push-buttom auto/manual feature for spot treatments Minimum flow feature to ensure proper application pattern as ground speed slows to extremes Precise rate control regardless of field conditions Solenoid and ball valve compatible (2 or 3 wire valves) Flow-based control Controls electric and hydraulic valves/motors NH3 compatible Three Boom Switches located on top of unit SprayMate II Kit $1, *Kit Includes: Console with 3 boom switches, 1 Servo Valve & 3/4 GFN Meter, LESS SPEED KIT EPD - Electric Pump Driver Vansco Radar Speed Sensor SPEED OPTIONS Wheel Speed Sensor Kit $ MicroTrak Radar $ Astro II GPS Speed Sensor $ INTERFACES FOR EXISTING RADARS In-Cab JD 2 Pin M/P $ Dickey-John AMP Connector $ Dickey-John Ford Connector $ Magnavox / Phillips Connector $ Raven $ John Deere M/P with Y-Cable $ DSA Interface Kit - For existing radar $ that has own power All above are for Radars Already powered-up. If you need to power up radar add $79.00 for power to any above cable. Use your existing Micro-Trak Automatic Monitor to Control a 12 Volt Pump up to 30 Amps Micro-Trak s new Electric Pump Driver (EPD) enables all Micro-Trak Rate Controllers (SprayMate, MT-2405F, MT-3405F, MT-9000 and MT-400) to control the rate of flow by regulating the speed of a 12 volt pump up to a max of 30 Amps. Part # Description Price Electric Pump Driver $ Part # Description Price Vansco Radar Speed Sensor $ Includes Adapter Cable for New Micro-Trak Products Mount Height: 12 to 48 Speed Range: 2 to 44 mph Power Source: 12 Volt Dimensions: 3.7 x 4 x 9.3 ADAPTER CABLES: MicroTrak-New Style Products $ MicroTrak-84C,96C,YT85 & 86S $ MicroTrak-MT3000 & MT5000 $ Raven 1 $ TeeJet 1 $ Grimes, IA - (800)

4 MONITORS & CONTROLS 109 In addition to providing accurate speed, area and distance measurement; the Calc-An-Acre II will now independently monitor the RPM of a shaft. It includes 3 independent area counters, two independent hour counters, an area per hour function and width reduction feature to measure the effective coverage area in spraying applications. FLOW MONITOR CALC-AN-ACRE II $ Calc-An-Acre II Parts Part# Desription Price Sensor Bracket $ Magnet $ Magnet Clip $ Speed Sensor $ Run/Hold Sensor Cable $ Speed Sensor Kit $ Magnets - 6 Pack $ Run/Hold Kit $ Relay Kit $ Speed, Run/Hold, Power Harness $ Owners Manual $ Shaft RPM Module Kit $ FLO-TRAK-NS $1, Includes FM750 Flow Meter Features: Counts Acres Acres Sprayed Speed, Distance Total Gallons Gallons per Acre Gallons per Minute Air Seeder Blockage Monitor Monitors up to 256 seed or fertilizer tubes Features: Immediate notification of plugged runs Easy to install No maintenance of sensor eyes No sensor in product flow to clog Scans every run Whirlwind Console $ Module Kit (up to 16 sensors) $ Sensor Kit, 1 $ Sensor Kit, 1 1/2 $94.97 SHAFT-TRAK Shaft & Bin Level Monitor Monitors up to 6 independent shafts or monitor up to 3 shafts and 3 bin levels. Sends information to allow operator to know if shaft or shafts are turning under 45 RPM or when level of bin is below sensor. No programming, plug & go! Audible alarm. Avoid skipped seeding areas. Kits Include: ShaftTrak Console, Shaft Sensor(s), Mounting Hardware and Instructions ShaftTrak kit w/ 1 sensor $ ShaftTrak kit w/ 2 sensor $ ShaftTrak kit w/ 3 sensor $ ShaftTrak kit w/ 4 sensor $ ShaftTrak kit w/ 5 sensor $ ShaftTrak kit w/ 6 sensor $ Grimes, IA - (800)

5 110 MONITORS & CONTROLS PARTS FOR OLD MT3000 & MT5000 MAIN HARNESS MT3000 Main Harness $ MT5000 Main Harness N/A NH3 - MT3000 Main Harness N/A NH3 - MT5000 Main Harness N/A SERVO VALVES Servo New Style, Fits All $ CABLES FOR VALVES & SENSORS Servo 3 Cable $ MT3000 Solenoid Cable $ MT5000 Solenoid Cable $ NH3 Secondary Cable $ Flow Trak Flow Sensor $ MT Flow Sensor $ MT5000 Aux. Cable N/A MISC MT3000 Console N/A Gauge N/A Console Knob $ MT3000 Manual $ MT3000 Terminal Kit $ Pin Connector $ MT3000 Ferrule Kit $ Snubber Washer Kit $20.07 MT3000 INTERFACE KITS (OLD STYLE) Dickey John AMP $ Magnavox $ TRW $ Dickey John, Willmar $ Dickey John, Packard $ Dickey John, Cannon $ Raven $ Universal Tee Tap Kit for Radars with $ own power OLD STYLE CALC-AN-ACRE 84C REPLACEMENT PARTS Magnet $ Sensor Bracket $ Magnet Clip $ Trak Star Adapter $ Owners Manual $ Speed Sensor Kit $ Speed Sensor Cable $ Speed Extension Cable $ Console Bracket $ Knob $8.85 FLOW-METER PARTS Common Turbine (Tan) $ FM750 O-Ring $ FM750SS Gasket $13.14 NH3 PARTS Strainer Screen $ NH3 Shut-Off Valve $1, DN50-2 NH3 Shut-Off Motor Assembly $ NH3 Servo Valve & Motor $1, NH3 Servo Motor Only - Old Style $ Vapor Tube $ NH3 Strainer $ NH3 Strainer Gasket $ /4 x 1 Vapor Tube $36.24 EXTENSION CABLES Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ SPEED PARTS Magnetic Speed Kit $ Run/Hold Kit $ Speed Sensor Cable $ Magnet $ Magnet Clip $ Sensor Bracket $16.27 MT3400 REPLACEMENT PARTS MT3400 Console N/A Flow Meter Sensor Cable $ Power Cable $ Flow, Distance, Servo Harness $ Run/Hold, 2-4 Boom, Boost Harness $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin Extension Cable $ Pin M/P Extension Cable $ Pin M/P Extension Cable $ Pin M/P Extension Cable $ Pin M/P Extension Cable $ Run/Hold Kit $ Run/Hold Sensor Cable $98.80 Grimes, IA - (800)

6 MONITORS & CONTROLS 111 NH3 Kits This NH3 kit is a complete, standalone system that can be used with any MT3000 or MT5000 console. It provides accurate, automatic application of NH3 and can handle rates of 600 to 6000 lbs per hour. Corrosion resistant materials assure long life even when applying N-Serve. KIT INCLUDES: Stainless steel flow meter, servo valve, heat exchanger and electric shut-off valve. Also provided; wiring harness, strainer, tubing, tees, clamps, mounting brackets and hardware. NH3 KITS MT-NH3 II w/ NH3500 Kit lbs NH3/hour $5, SprayMate II w/ NH3500 Kit lbs NH3/hour $5, MT-2405-F-II w/ NH3500 Kit lbs NH3/hour $5, MT-3405-F-II w/ NH3500 Kit lbs NH3/hour $5, SPEED OPTIONS DSA Interface Kit for Radar $ Magnetic Speed Kit $ AstroII GPS Speed Sensor $ FLO-PRO Liquid Flow Monitor Features and Capabilities that outperform simple gallon counters. Can monitor 3 flow meters Counts batch gallons and total gallons Set key allows a pre-determined gallonage point which can set off a horn or a buzzer when that point is reached Provides a continuous digital readout within 1/10 gallon GFN Flo-Pro Kit $ *Kit Includes: 3/4 GFN Flow Meter Grimes, IA - (800)