PRELIMINARY. MICRO SWITCH Compact Limit Switches NGC Series. 00XXXX Issue 1. Datasheet FEATURES POTENTIAL INDUSTRIAL APPLICATIONS DESCRIPTION

Transcription

1 MICRO SWITCH Compact Limit Switches NGC Series 00XXXX Issue 1 atasheet ESCRIPTION Honeywell s MICRO SWITCH Compact Limit Switches, NGC Series, are a configurable platform of medium-duty switches that allow the customer to choose SPT (single pole, double throw) or PT (double pole, double throw) circuitry while maintaining the same housing and mounting footprint throughout the NGC Series. MICRO SWITCH NGC Series can be configured more than 380,000 ways, carries global approvals, and are sealed to IP67 for potential use in indoor and outdoor applications. VLUE TO CUSTOMERS Cost-effective: Provides a single source for a compact SPT and PT compact limit switch, which can help reduce the Original Equipment Manufacturer s sourcing expenses by simplifying their supply chain Versatile: urable packaging allows for use in the harshest of indoor or outdoor applications, providing performance confidence Configurable: llows design engineers to standardize on a single footprint while meeting a variety of electrical requirements pplication support: Customers with a global footprint can count on Honeywell for regional support for new applications and troubleshooting IFFERENTITION With two times the vibration (10 g) and shock (50 g) ratings of comparable competitive devices, the NGC Series can be implemented in the harshest of environmental conditions, providing enhanced reliability and repeatability roader current capacity (10 ) than comparable devices allows for potential use in a wider set of applications, making platform standarization an easier task FETURES SPT or PT configurable circuitry Snap-action, positive-break contacts Silver alloy and gold plated contact options UL, CE, cul, and CCC approvals NEM 1, 4, 12, 13; IP67 sealing Metal and plastic housing options Cable and connector terminations Variety of heads and actuator levers POTENTIL INUSTRIL PPLICTIONS oom position detection Elevators and escalators Machine tools Mobile light towers Packaging equipment Rail doors Scissor lifts PORTFOLIO The NGC Series joins the 14CE, 914CE, LS, and E6/V6 Series of Medium-uty Limit Switches. Honeywell also offers a portfolio of MICRO SWITCH Heavy-uty Limit Switches and Global Limit Switches. PRELIMINRY Sensing and Control

2 Table 1. Specifications Characteristic escription ctuators Terminations (SPT) Terminations (PT) Material approval standard Switching options Sealing Contacts Operating temperature Storage temperature Mechanical endurance Electrical life Thermal current Rated insulation voltage (Ui) ielectric strength Impulse voltage Pollution degree Humidity Operating speed Switching frequency Shock Vibration Parameter compact, medium-duty limit switches Side Rotary Configurations Side rotary Side rotary (short) Side rotary with adjustable length roller lever Reversed side rotary (short) Reversed side rotary with adjustable length roller lever Normal cable, 0,75 mm 2 (18 WG) cable PUR cable, 0,75 mm 2 (18 WG) cable Special application cable, 4 & 5 x 0,75 mm 2 (18 WG) non-halogen cable Connector, 4-pin male, M12 thread Connector, 5-pin male, M12 thread Normal cable, 0,50 mm 2 (20 WG) cable PUR cable, 0,50 mm 2 (20 WG) cable Special application cable, 8 & 9 x 0,50 mm 2 (20 WG) non-halogen cable Connector, 4-pin male, M12 thread Connector, 5-pin male, M12 thread Plunger Configurations Pin (standard 4,8 mm [0.19 in] and long 7,4 mm [0.29 in]) Roller (standard 15,3 mm [0.60 in] and long 17,85 mm [0.70 in]) Cross roller (standard 15,3 mm [0.60 in] and long 17,85 mm [0.70 in]) Pin with boot seal Panel-mount pin Panel-mount roller Panel-mount cross roller Panel-mount pin with boot seal (only applicable for product with non-halogen cable) IN (flammability rating: S3; smoke rating: > SRI; welt rating: ST2; toxic gas rating: FE(TZUL=15min)< 1) SPT, PT; snap action contacts (1NC/1NO, 2NC/2NO) NEM 1, 4, 12, 13; IP67 per IEC suitable for outdoor applications snap action, positive break standard: silver alloy; gold: gold-plated 25 C to 70 C [ -13 F to 158 F] -40 C to 85 C [-40 F to 185 F] PRELIMINRY pprovals 1NC/1NO: 5 M cycles min. at 120 CPM 2NC/1NO: 5 M cycles min. at 60 CPM Vdc 500,000 cycles applicable only for NC circuit 1NC/1NO: 10 ; 2NC/2NO: 5 1NC/1NO: 400 V as per IEC NC/2NO: 250 V as per IEC Vac for metal housing; 2890 Vac for plastic housing 1500 Vac between all terminals to enclsoure after durability test 1NC/1NO: 2500 Vdc as per IEC NC/2NO: 1500 Vac as per IEC (III) 95 %RH 0,3 mm/s to 2 m/s 1NC/1NO: 120 cpm 2NC/2NO: 60 cpm Conforming to IEC Standards IEC , IEC g for 11 ms as per IEC ; railway application, per IEC Class I Car type 10 g as per IEC , frequency range 10 Hz to 500 Hz; railway application per IEC Class I Car type UL (UL508), cul, CE (IEC ), CCC (G ) 2 sensing.honeywell.com

3 Table 2. Electrical Ratings Circuitry/contacts 1NC/1NO (silver-alloy contacts) 1NC/1NO (gold-plated contacts) 2NC/2NO (silver-alloy contacts) 2NC/2NO (gold-plated contacts) Rating, Rated Voltage & Current 300 C15: 120 V 6 ; 240 V 3 per IEC and UL 508 Q300 C13: 125 Vdc 0.55 ; 250 Vdc 0.27 per IEC an UL 508 low level current: 30 mvdc 10 m resistive C300 C15: Vac per IEC R300 C13: Vdc per IEC low level current: 30 mvdc 10 m resistive Figure 1. Product Nomenclature and Order Guide NGC M 02 X 1 1 Switch Type NGC Series Medium-uty Compact Limit Switch P Q Housing M Metal Plastic Plastic with mounting ring support Connection C Side exit, right ottom exit Side exit, left NOTE: not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. 1 Only applicable for Head Type 2 Only applicable for Lever Types 1, 2, 6 3 Only applicable for Lever Types 2, 6 Cable Length 10 No cable. Internal connector 0,25 m [0.82 ft] 0,5 m [1.64 ft] 0,7 m [2.3 ft] 1,0 m [3.28 ft] 15 1,5 m [4.92 ft] 2,0 m [6.56 ft] ,0 m [9.84 ft] 40 4,0 m [13.12 ft] ft] 50 5,0 m [16.4 ft] Connector/Cable Connector at Exiting Housing End of Cable N P Standard cable Halogen-free cable PUR cable M12 4-pin micro change, dc connector M12 5-pin micro change, dc connector X None Switch Type 1NC/1NO snap action silver contacts NC/1NO snap action gold contacts 2NC/2NO snap action silver contacts 2NC/2NO snap action gold contacts C L M P Q R Head Type Side rotary Pin Roller Cross roller Pin w/ boot seal N Panel-mount pin S T Long pin Panel-mount roller Panel-mount cross-roller Panel-mount pin w/ boot seal Long roller Long cross-roller Levers (Optional) None Standard, fixed length 1 djustable length, roller lever 1 Short, fixed length 1 Rollers (Optional) C None 18 mm nylon roller 2 18 mm stainless steel roller 2 18 mm nylon roller, reversed 3 18 mm stainless steel roller, reversed 3 Modifications PRELIMINRY Common Part Numbers NGCM10X1 NGCM10X NGCM10XL NGCM10XM NGCM10XN NGCM10XP NGCM10XQ NGCM10XR NGCM10X1 NGCM10X241 NGCM10X24C NGCP00NX1 NGCM00PX1 NGCP00NXC NGCP10X1 NGCP10X NGCP10XC NGCP10XL NGCP10XM NGCP10XN NGCP10XP NGCP10XQ NGCP10XR NGCP10X1 NGCP10X24C NGCM10X1 NGCM10XC NGCM10XM NGCM10XC NGCP10X241 NGCM10XC NGCM10X32C NGCM10X1 NGCP10XC NGCP10X24C Serialized number for specials Honeywell Sensing and Control 3

4 Figure 2. Connector imensions and Pin-Out Identification Figure 3. Side Rotary 1/1 imensions 32,5 [1.28] FP PT PT 4-Pin Identification 65,5 [2.58] Ø 18 [Ø 0.71] 16,7 [0.66] Side Exit 15 [0.59] 12 [0.47] 17 [0.67] 12 5-Pin [0.47] ottom Exit Figure 4. Side Rotary 6/6 imensions FP PT PT Identification 19,9 [0.78] Type 1/1 Side Rotary Figure 5. Side Rotary 2/2 imensions 52 [2.05] Ø [2.00] min. Ø 18 [Ø 0.71] 103 [4.05] [Ø 0.71] 16,7 [0.66] Type 6/6 Side Rotary (Short) PT FP PT 29 [1.14] 16,7 [0.66] Type 2/2 Side Rotary with djustable Length Roller Lever PRELIMINRY Figure 6. Side Rotary 6C/6 imensions FP PT PT 10,8 [0.43] Figure 7. Side Rotary 2C/2 imensions FP 19,6 [0.77] PT PT 52 [2.05] Ø 18 [Ø 0.71] 51 [2.00] min. 103 [4.05] 16,7 [0.66] 16,7 [0.66] Type 6C/6 Reversed Side Rotary (Short) Type 2C/2 Reversed Side Rotary with djustable Length Roller Lever 4 sensing.honeywell.com

5 Table 2. Side Rotary Operating Characteristics Catalog Listing Connector/ Cable Exit Switch Type Circuit iagram ar Charts ctuation ifferential Travel Operating Force/ Torque Release Force/ Torque NGCP NGCP NGCP NGCP NGCP NGCP Side Rotary NGCP_N N NGCP_N N NGCM NGCM NGCM NGCM NGCM NGCM NGCM_P P NGCM_P P NGCP 24 NGCP 24 NGCP 24 NGCP 32 NGCP 32 NGCP 32 NGCM 24 NGCM 24 NGCM 24 NGCM 32 NGCM 32 NGCM How to read and understand the bar chart information Ncm 2,5 Ncm Ncm 2,1 Ncm PRELIMINRY The following example relates to a unit which has a snap action basic and which has a roller pin actuator. Follow the black arrows and the black strip on the chart. The black strip indicates that there is a circuit between the terminals whose numbers are shown on the left and when white there is no circuit. Look at Figures and as examples. ctuator type used for test is the linear Cam travel type (b) shown left. The start point is at the arrow marked (See fig. ). This shows the free position to be 5.3 mm from the vertical center line of the unit. t this stage there is a circuit between the terminals but no circuit between terminals The unit can be actuated until it reaches the operating position which is 10,5 mm from the center line a travel distance of 10,5 5,3 = 5,2 mm from the free position. t this point the circuit arrangement changes no circuit between but making a circuit between If, however, the contacts of terminals weld together and will not separate, a mechanical safety feature will take effect if the switch is travelled past the point from which positive opening is assured, 13,9 mm. s the switch returns it reaches the release position at 8.9 mm from the center line. The circuit will change back to the original state and the difference between the operating position and the release position gives what is known as the differential travel i.e. 10,5 8,9 = 1,6 mm. The asterisk (*) indicates the point from which the positive opening is assured. Honeywell Sensing and Control 5

6 Figure 8. Pin Plunger & imensions Figure 9. Roller Plunger C & S imensions Figure 10. Cross Roller Plunger L & T imensions Ø 8 [Ø 0.31] FP ±0,5 Ø 12,7 x 4 [Ø 0.5 x 0.16] FP ±0,5 Ø 12,7 [Ø 0.5] 4 [0.16] FP ±0,5 NGC_ FP 19,8 mm NGC_ FP 22,4 mm Pin Plunger Figure 11. Pin Plunger with oot Seal M imensions Ø 6,7 [Ø 0.26] 32,3 [1.27] NGC_M Pin Plunger with oot Seal Figure 14. Panel-Mount Cross Roller Plunger Q imensions M12 x 1 Ø 12,7 [Ø 0.5] 0,5 [0.02] 4 [0.16] 47,5 [1.87] NGC_C FP 30,3 mm NGC_S FP 32,85 mm Roller Plunger Figure 12. Panel-Mount PIn Plunger N imensions Ø 8 [Ø 0.31] M12 x 1 1 [0.04] 36,5 [1.44] NGC_N Panel-Mount Pin Plunger Figure 15. Panel-Mount PIn Plunger With oot Seal R imensions Ø 6,7 [Ø 0.26] NGC_L FP 30,3 mm NGC_T FP 32,85 mm Cross Roller Plunger Figure 13. Panel-Mount Roller Plunger P imensions Ø 12,7 x 4 [Ø 0.5 x 0.16] M12 x 1 47,5 [1.87] PRELIMINRY M12 x 1 1,8 [0.] 47,5 [1.87] NGC_P Panel-Mount Roller Plunger NGC_Q Panel-Mount Cross Roller Plunger 6 sensing.honeywell.com NGC_R Panel-Mount Pin Plunger with oot Seal

7 Table 3. Plunger Operating Characteristics Catalog Listing ctuation Connector/ Cable Exit Switch Type Circuit iagram ar Charts ifferential Travel Operating Force/ Torque Release Force/ Torque NGCP /C//L/M/N/P/Q/R/S/T NGCP /C//L/M/N/P/Q/R/S/T NGCP /C//L/M/N/P/Q/R/S/T NGCP /C//L/M/N/P/Q/R/S/T NGCP /C//L/M/N/P/Q/R/S/T NGCP /C//L/M/N/P/Q/R/S/T Plunger Head NGCP_N /C//L/M/N/P/Q/R/S/T N NGCP_N /C//L/M/N/P/Q/R/S/T N NGCM /C//L/M/N/P/Q/R/S/T NGCM /C//L/M/N/P/Q/R/S/T NGCM /C//L/M/N/P/Q/R/S/T NGCM /C//L/M/N/P/Q/R/S/T NGCM /C//L/M/N/P/Q/R/S/T NGCM /C//L/M/N/P/Q/R/S/T NGCM_P /C//L/M/N/P/Q/R/S/T P NGCM_P /C//L/M/N/P/Q/R/S/T P NGCP 24_/C//L/M/N/P/Q/R/S/T NGCP 24_/C//L/M/N/P/Q/R/S/T NGCP 24_/C//L/M/N/P/Q/R/S/T NGCP 32_/C//L/M/N/P/Q/R/S/T NGCP 32_/C//L/M/N/P/Q/R/S/T NGCP 32_/C//L/M/N/P/Q/R/S/T NGCM 24_/C//L/M/N/P/Q/R/S/T NGCM 24_/C//L/M/N/P/Q/R/S/T NGCM 24_/C//L/M/N/P/Q/R/S/T NGCM 32_/C//L/M/N/P/Q/R/S/T NGCM 32_/C//L/M/N/P/Q/R/S/T NGCM 32_/C//L/M/N/P/Q/R/S/T 24 1 mm 10 N 2,5 Ncm Ncm 2,1 Ncm PRELIMINRY Honeywell Sensing and Control 7

8 ITIONL MTERILS The following associated literature is available on the Honeywell web site at sensing.honeywell.com: Product line guide Product part listing/nomenclature tree Product range guide pplication note Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest uthorized istributor, contact your local sales office. To learn more about Honeywell s sensing and control products, call or , visit sensing.honeywell.com, or inquiries to info.sc@honeywell.com m WRNING PERSONL INJURY O NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. m WRNING MISUSE OF OCUMENTTION The information presented in this product sheet is for reference only. o not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. PRELIMINRY Sensing and Productivity Solutions Honeywell 1985 ouglas rive North Golden Valley, MN honeywell.com 00XXXX-1-EN IL50 GLO October Honeywell International Inc. ll rights reserved.