Smart and Skilled: 2016 NSW Skills List V5.0 All qualifications listed in alphabetical order (including Foundation Skills and accredited courses)

Transcription

1 Smart and Skilled: V5.0 All qualifications listed in alphabetical order (including Foundation Skills and accredited courses) NSW DEPARTMENT OF INDUSTRY JUNE

2 State of New South Wales through Department of Industry, Skills and Regional Development Disclaimer: The information contained in this publication is based on knowledge and understanding at the time of writing (June 2016). However, because of advances in knowledge, users are reminded of the need to ensure that the information upon which they rely is up to date and to check the currency of the information with the appropriate officer of the Department of Industry, Skills and Regional Development or the user s independent advisor.

3 The NSW Skills List The NSW Skills List defines the qualifications eligible for government funding under Smart and Skilled. The NSW Skills List was developed through extensive labour market analysis and consultation with industry and the community. It is reviewed annually to ensure it meets the changing skill needs of industry. The Skills List is also updated regularly during the year to reflect changes to qualifications and vocational training orders for apprenticeships and traineeships. The 2016 List was developed through targeted consultations with peak provider and industry bodies. The NSW Skills Board has endorsed the 2016 Skills List, which includes 35 additional qualifications. A separate List with prices, fees and subsidies for each qualification is also available at s on the Skills List The qualifications on the Skills List support the diverse needs of industry and the NSW economy. These are qualifications that give people the skills they need for good job prospects, career paths and higher learning opportunities. and priorities Smart and Skilled qualifications on the 2016 Skills List are grouped into two programs: priorities Certificate ll and lll qualifications and foundation skills courses on the NSW Skills List and traineeship qualifications at all levels, as identified on the NSW Skills List priorities Full qualifications at Certificate lv, Diploma and Advanced Diploma level on the NSW Skills List Pre-vocational and part qualifications through the Smart and Skilled Priorities Prevocational and Part s Program. See the next page for more details. Further information For further information about Smart and Skilled, go to: The Skills List covers all qualification levels from Certificate ll to Advanced Diploma, select foundation skills courses, all apprenticeships and selected traineeships. The List comprises Training Package qualifications, foundation skills and accredited courses.

4 Priorities Prevocational and Part s Program This program focuses on training to help people develop the skills they need to get a job, undertake entry level qualifications or transition to a new job. Target areas for Prevocational and Part s The three target areas for the program are: Prevocational training Pre-apprenticeship and pre-traineeship training groups and industries. The Department may offer subsidised training only in circumstances where an individual or industry has no other source of funding available. Prevocational training Prevocational training is targeted to help individuals to get a job or continue training to achieve a full qualification. Pre-apprenticeship and pre-traineeship training This training is targeted to help individuals gain an apprenticeship or traineeship. groups and industries There are two priority areas for part qualifications: groups: Long term unemployed Students living in rural or remote areas Job seekers, including: Centrelink benefit recipients Underemployed workers who need further training to work more hours Mature aged workers returning to the workforce Retrenched workers and those at risk of retrenchment. School leavers People with a disability Aboriginal and Torres Strait Islanders Disadvantaged youth or youth at risk Inmates in NSW Correctional Centres, including Juvenile Justice Centres Unemployed volunteers, to support pathways to employment and/or community service. industries: Industries undergoing economic structural change, needing to retain or up-skill workers to adapt to changing markets or to remain viable Industry sectors that can demonstrate the need for entry level skills, rather than full qualifications Emerging industry areas in a thin market where the training supports industry expansion into new areas, creates new jobs or permanent employment, or supports growth in a local or regional economy Industries experiencing skill shortages. industries must be willing to: partner with government and other stakeholders participate in candidate selection offer relevant work experience linked to the training, and offer actual job opportunities.

5 Priorities Prevocational and Part s Program Types of training The Department may approve vocational and foundation skills training under the Smart and Skilled Priorities Prevocational and Part s Program: Prevocational courses comprising units of competency from: qualifications on the current NSW Skills List qualifications not on the current NSW Skills List where there is a demonstrated industry or individual need under certain circumstances, it might include full qualifications on the NSW Skills List for Foundation Skills (at Certificate I and II level). Introductory units of competency from apprenticeship and traineeship qualifications on the current NSW Skills List Nationally recognised vocational short courses and Statements of Attainment Vocational skill sets as defined in Training Packages Units of competency from Foundation Skills qualifications on the current NSW Skills List Where need can be demonstrated, units from higher level language, literacy and numeracy qualifications (Certificate II and above) may be approved to support students undertaking higher level vocational qualifications.

6 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must FSK10113 Certificate I in Access to Vocational Pathways * General education - not occupationally specific 10088NAT Certificate I in Access to Work and Training * Non-industry specific training 10087NAT Certificate I in Access to Work and Training (Introductory) * General education - not occupationally specific 10078NAT Certificate I in Basic English Language Skills * General education - not occupationally specific 22236VIC Certificate I in General Education for Adults * General education - not occupationally specific 22235VIC Certificate I in General Education for Adults (Introductory) * General education - not occupationally specific ICA10111 ICT10115 Certificate I in Information, Digital Media and Technology * Keyboard Operators FSK10213 Certificate I in Skills for Vocational Pathways * General education - not occupationally specific 22128VIC 22302VIC Certificate I in Work Education * General education - not occupationally specific CUV20211 CUA20415 Certificate II in Aboriginal and Torres Strait Islander Cultural Arts Performing Arts Technicians Nec CUV20313 CUA20315 Certificate II in Aboriginal and Torres Strait Islander Visual Arts Industry Work Performing Arts Technicians Nec HLT20113 Certificate II in Aboriginal and/or Torres Strait Islander Primary Health Care Aboriginal and Torres Strait Islander Health Worker MEA20411 MEA20415 Certificate II in Aeroskills Aircraft Maintenance Engineer (Avionics) AHC20110 Certificate II in Agriculture Mixed Crop and Livestock Farm Worker ACM20110 Certificate II in Animal Studies Animal Attendants And Trainers Nec LMT21707 Certificate II in Applied Fashion Design and Technology Sewing Machinist SFI20111 Certificate II in Aquaculture Aquaculture Worker AHC20510 AHC20513 Certificate II in Arboriculture Logging Plant Operator 22075VIC Certificate II in Auslan * Community Worker AUR20212 AUR20216 Certificate II in Automotive Air Conditioning Technology AUR20912 AUR20916 Certificate II in Automotive Body Repair Technology AUR21312 AUR21316 Certificate II in Automotive Braking System Technology AUR21412 AUR21416 Certificate II in Automotive Cooling System Technology AUR21512 AUR21516 Certificate II in Automotive Cylinder Head Reconditioning AUR21612 AUR21616 Certificate II in Automotive Driveline System Technology 2016 V5.0 Page 1 of 32

7 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must AUR20412 AUR20416 Certificate II in Automotive Electrical Technology AUR21712 AUR21716 Certificate II in Automotive Exhaust System Technology AUM20212 AUM20213 Certificate II in Automotive Manufacturing Production - Bus, Truck and Trailer Product Assembler AUR21112 AUR21116 Certificate II in Automotive Sales AUR20512 AUR20516 Certificate II in Automotive Servicing Technology AUR21812 AUR21816 Certificate II in Automotive Steering and Suspension System Technology AUR21913 AUR21916 Certificate II in Automotive Tyre Servicing Technology AUR21212 AUR21216 Certificate II in Automotive Underbody Technology AVI20208 AVI20116 Certificate II in Aviation (Flight Operations-Cargo Services) AVI20408 AVI20216 Certificate II in Aviation (Ground Operations and Service) AVI20713 AVI20416 Certificate II in Aviation Transport Protection (Checked Baggage Screener) AVI20613 AVI20316 Certificate II in Aviation Transport Protection (Passenger and Non-Passenger Screener) MEM20305 Certificate II in Boating Services Boat Builder and Repairer BSB20112 BSB20115 Certificate II in Business General Clerk 91533NSW Certificate II in Careers in Dance Actors, Dancers and Other Entertainers RII20713 RII20715 Certificate II in Civil Construction Earthmoving Plant Operators PRM20104 CPP20611 Certificate II in Cleaning Operations Commercial Cleaner LMT20707 Certificate II in Clothing Production (Complex or Multiple Processes) Sewing Machinist LMT20607 Certificate II in Clothing Production (Intermediate) Textile and Footwear Production Machine Operators SIR20112 SIR20116 Certificate II in Community Pharmacy CHC20112 CHC22015 Certificate II in Community Services Community Worker MSA21108 MSS20312 Certificate II in Competitive Systems and Practices Engineering Production Workers UEE20510 UEE20511 Certificate II in Computer Assembly and Repair Electrical or Telecommunications Trades Assistant AHC21010 Certificate II in Conservation and Land Management Farm, Forestry And Garden Workers Nec CPC20112 Certificate II in Construction Builder's Labourer 2016 V5.0 Page 2 of 32

8 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must CPC20211 Certificate II in Construction Pathways Builder's Labourer BSB20211 BSB20215 Certificate II in Customer Engagement Call or Contact Centre Operator RII20913 RII20915 Certificate II in Drilling Operations Driller's Assistant TLI21210 TLI21216 Certificate II in Driving Operations Automobile Drivers UEE21911 Certificate II in Electronics Electrical or Telecommunications Trades Assistant UEE22010 UEE22011 Certificate II in Electrotechnology (Career Start) Electrical or Telecommunications Trades Assistant MEM20105 Certificate II in Engineering Metal Engineering Process Worker MEM20205 Certificate II in Engineering - Production Technology Metal Engineering Process Worker SFI20211 Certificate II in Fishing Operations Deck Hand SFL20110 SFL20115 Certificate II in Floristry (Assistant) Florist FDF20111 Certificate II in Food Processing Food And Drink Factory Workers Nec FPI20111 FPI20113 FWP20116 Certificate II in Forest Growing and Management 10079NAT Certificate II in Foundation English Language Skills * General education - not occupationally specific 10076NAT Certificate II in Foundations for Vocational and Further Study * General education - not occupationally specific MSF20113 Certificate II in Furnishing Product Assembler LMF20309 MSF20313 Certificate II in Furniture Making Product Assembler TLI22413 TLI22416 Certificate II in Furniture Removal Furniture Removalist 22237VIC Certificate II in General Education for Adults * General education - not occupationally specific PSP20112 PSP20116 Certificate II in Government FPI20211 FPI20213 FWP20216 Certificate II in Harvesting and Haulage HLT21212 HLT23215 Certificate II in Health Support Services Nursing Support Worker AHC20410 Certificate II in Horticulture Garden Labourer SIT20213 SIT20316 Certificate II in Hospitality 2016 V5.0 Page 3 of 32

9 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must ICA20111 ICT20115 Certificate II in Information, Digital Media and Technology Keyboard Operators AHC21112 Certificate II in Irrigation Farm, Forestry And Garden Workers Nec SIT20312 SIT20416 Certificate II in Kitchen Operations AHC21610 Certificate II in Landscaping Garden Labourer TLI21810 TLI21815 Certificate II in Logistics Production Clerk MAR20113 MAR20313 Certificate II in Maritime Operations (Coxswain Grade 1 Near Coastal) Ship's Master TDM20207 MAR20413 Certificate II in Maritime Operations (Marine Engine Driver Grade 3 Near Coastal) Ship's Engineer MTM20111 Certificate II in Meat Processing (Abattoirs) Meat Process Worker MTM20411 Certificate II in Meat Processing (Food Services) Meat Process Worker HLT21112 HLT21015 Certificate II in Medical Service First Response Emergency Service Worker AUR21012 AUR21016 Certificate II in Motor Sport Technology CUS20109 CUA20615 Certificate II in Music Industry Sound Technician AUR20812 AUR20816 Certificate II in Outdoor Power Equipment Technology SIS20210 SIS20213 Certificate II in Outdoor Recreation Outdoor Adventure Instructor AHC20610 Certificate II in Parks and Gardens Garden Labourer PMB20101 PMB20107 Certificate II in Polymer Processing Plastics and Rubber Production Machine Operators HLT20912 HLT26015 Certificate II in Population Health Health and Welfare Support Workers ICP20210 ICP20115 Certificate II in Printing and Graphic Arts (General) Printer's Assistant AHC20310 Certificate II in Production Horticulture Horticultural Nursery Assistant AHC20710 Certificate II in Production Nursery Horticultural Nursery Assistant PUA20601 PUA20613 Certificate II in Public Safety (Firefighting and Emergency Operations) Fire Fighter PUA20701 PUA20713 Certificate II in Public Safety (Firefighting Operations) Fire Fighter RGR20208 RGR20213 Certificate II in Racing (Greyhound) Animal Attendants And Trainers Nec RGR20102 RGR20108 Certificate II in Racing (Stablehand) Stablehand TLI21311 TLI21315 Certificate II in Rail Infrastructure Railway Track Worker 2016 V5.0 Page 4 of 32

10 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must RII20113 RII20115 Certificate II in Resources and Infrastructure Work Preparation Other Construction and Mining Labourers SIB20110 SHB20116 Certificate II in Retail Cosmetics SIR20212 SIR20216 Certificate II in Retail Services 10080NAT Certificate II in Routine English Language Skills * General education - not occupationally specific AHC21210 Certificate II in Rural Operations Farm, Forestry and Garden Workers SIH20111 SHB20216 Certificate II in Salon Assistant FPI20311 FWP20316 Certificate II in Sawmilling and Processing SFI20611 Certificate II in Seafood Industry (Sales and Distribution) Sales Assistant (General) UEE21610 UEE21611 Certificate II in Security Assembly and Set-up Electrical or Telecommunications Trades Assistant AHC21310 Certificate II in Shearing Wool Handler TLI22013 TLI22015 Certificate II in Shunting Railway Track Plant Operator 10077NAT Certificate II in Skills for Work and Study * General education - not occupationally specific 10089NAT Certificate II in Skills for Work and Training * Non-industry specific training 10090NAT Certificate II in Skills for Work and Training in the Community Sector * Non-industry specific training FSK20113 Certificate II in Skills for Work and Vocational Pathways * General education - not occupationally specific SIS20113 SIS20313 SIS20115 Certificate II in Sport and Recreation General Clerk AHC20910 Certificate II in Sports Turf Management Garden Labourer TLI21413 TLI21416 Certificate II in Stevedoring Waterside Worker RII20213 RII20215 Certificate II in Surface Extraction Operations Miner CPP20307 Certificate II in Technical Security Electrical or Telecommunications Trades Assistant ICT20613 ICT20215 Certificate II in Telecommunications Network Build and Operate Electrical or Telecommunications Trades Assistant ICT20213 ICT20315 Certificate II in Telecommunications Technology Electrical or Telecommunications Trades Assistant LMT20507 Certificate II in Textile Fabrication Textile and Footwear Production Machine Operators FPI20511 FWP20516 Certificate II in Timber Manufactured Products 2016 V5.0 Page 5 of 32

11 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must FPI20611 FWP20616 Certificate II in Timber Merchandising SIT20112 SIT20116 Certificate II in Tourism RII20313 RII20315 Certificate II in Underground Coal Mining Miner RII20413 RII20415 Certificate II in Underground Metalliferous Mining Miner TLI21610 TLI21616 Certificate II in Warehousing Operations Storeperson PRM20509 CPP20411 Certificate II in Waste Management Recycling or Rubbish Collector NWP20107 NWP20115 Certificate II in Water Industry Operations Waste Water or Water Plant Operator AHC21410 Certificate II in Wool Handling Wool Handler CUV30211 CUA30515 Certificate III in Aboriginal and Torres Strait Islander Cultural Arts Visual Arts and Crafts Professionals HLT30113 Certificate III in Aboriginal and/or Torres Strait Islander Primary Health Care Aboriginal and Torres Strait Islander Health Worker AHC32513 Certificate III in Aboriginal-sites Work Park Ranger FNS30311 FNS30315 Certificate III in Accounts Administration Accounts Clerk CHC30612 CHC34015 Certificate III in Active Volunteering Community Worker 10082NAT Certificate III in Advanced English for Further Study * General education - not occupationally specific AHC33110 Certificate III in Advanced Wool Handling Shearer MEA30211 MEA30215 Certificate III in Aeroskills (Mechatronics) Aircraft Maintenance Engineer (Avionics) AUR30412 AUR30416 Certificate III in Agricultural Mechanical Technology AHC30110 Certificate III in Agriculture Farmers and Farm Managers AHC30210 Certificate III in Agriculture (Dairy Production) Dairy Cattle Farmer UEE31307 UEE32211 Certificate III in Air-conditioning and Refrigeration Airconditioning and Refrigeration Mechanic MEA30111 MEA30115 Certificate III in Aircraft Surface Finishing Aircraft Maintenance Engineer (Structures) HLT32412 HLT33015 Certificate III in Allied Health Assistance Therapy Aide ACM30110 Certificate III in Animal Studies Animal Attendants And Trainers Nec ACM30210 Certificate III in Animal Technology Animal Attendants And Trainers Nec UEE30507 UEE32111 Certificate III in Appliance Service Electrician (General) 2016 V5.0 Page 6 of 32

12 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must LMT31407 Certificate III in Applied Fashion Design and Technology Dressmaker or Tailor SFI30111 Certificate III in Aquaculture Aquaculture Worker SIS30113 SIS30213 SIS31015 Certificate III in Aquatics and Community Recreation Community Worker AHC30810 Certificate III in Arboriculture Arborist CUV30411 CUA30615 Certificate III in Arts Administration Program or Project Administrator SIT30913 SIT31116 Certificate III in Asian Cookery 22077VIC Certificate III in Auslan * Community Worker AUR30112 AUR30116 Certificate III in Automotive Administration AUR32012 AUR32016 Certificate III in Automotive Alternative Fuel Technology AUR32312 AUR32316 Certificate III in Automotive and Marine Trimming Technology AUR32112 AUR32116 Certificate III in Automotive Body Repair Technology AUR31512 AUR31516 Certificate III in Automotive Diesel Engine Technology AUR31412 AUR31416 Certificate III in Automotive Diesel Fuel Technology AUR31612 AUR31616 Certificate III in Automotive Drivetrain Technology AUR30312 AUR30316 Certificate III in Automotive Electrical Technology AUR31312 AUR31316 Certificate III in Automotive Engine Reconditioning AUR32212 AUR32216 Certificate III in Automotive Glazing Technology AUM30212 AUM30213 Certificate III in Automotive Manufacturing Technical Operations - Bus, Truck and Trailer Vehicle Body Builder AUR32412 AUR32416 Certificate III in Automotive Refinishing Technology AUR31012 AUR31016 Certificate III in Automotive Sales AUR32613 AUR32616 Certificate III in Automotive Tyre Management AUR32512 AUR32516 Certificate III in Automotive Underbody Technology AVI30208 AVI30116 Certificate III in Aviation (Cabin Crew) AVI30408 AVI30416 Certificate III in Aviation (Ground Operations and Service) 2016 V5.0 Page 7 of 32

13 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must AVI30813 AVI30316 Certificate III in Aviation (Remote Pilot - Visual Line of Sight) J AVI30510 AVI30216 Certificate III in Aviation (Rescue Crewman) SHB30516 Certificate III in Barbering SIB30110 SHB30115 Certificate III in Beauty Services Beauty Therapist AHC32010 Certificate III in Beekeeping Apiarist AUR30212 AUR30216 Certificate III in Bicycle Workshop Operations LMF31808 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Home Improvement Installer CPC30111 Certificate III in Bricklaying/Blocklaying Bricklayer BSB30112 BSB30115 Certificate III in Business General Clerk BSB30412 BSB30415 Certificate III in Business Administration General Clerk BSB30912 BSB30915 Certificate III in Business Administration (Education) Secretary (General) BSB31012 BSB31015 Certificate III in Business Administration (Legal) Legal Secretary BSB31112 BSB31115 Certificate III in Business Administration (Medical) Medical Receptionist SIR30412 SIR30316 Certificate III in Business to Business Sales LMF32109 MSF31113 Certificate III in Cabinet Making Cabinetmaker ACM30310 Certificate III in Captive Animals Animal Attendants And Trainers Nec 91536NSW Certificate III in Careers in Dance Actors, Dancers And Other Entertainers Nec CPC30211 Certificate III in Carpentry Carpenter CPC32011 Certificate III in Carpentry and Joinery Carpenter SIT31013 SIT30916 Certificate III in Catering Operations SIF30108 SIF30113 Certificate III in Cemetery and Crematorium Operations Funeral Workers Nec RII30913 RII30915 Certificate III in Civil Construction Earthmoving Plant Operator (General) RII30813 RII30815 Certificate III in Civil Construction Plant Operations Earthmoving Plant Operator (General) RII31213 RII31215 Certificate III in Civil Foundations Earthmoving Plant Operator (General) CPP31011 CPP30316 Certificate III in Cleaning Operations 2016 V5.0 Page 8 of 32

14 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must LMT30507 Certificate III in Clothing Production Clothing Trades Workers SIT30813 SIT30816 Certificate III in Commercial Cookery AHC32113 Certificate III in Commercial Seed Processing Nurseryperson SIR30112 SIR30116 Certificate III in Community Pharmacy CHC30112 CHC32015 Certificate III in Community Services Welfare Support Workers ACM30410 Certificate III in Companion Animal Services Animal Attendants And Trainers Nec MSA31108 MSS30312 Certificate III in Competitive Systems and Practices Miscellaneous Technicians and Trades Workers UEE30210 UEE30211 Certificate III in Computer Systems Equipment Electronic Instrument Trades Worker (General) CPC30311 CPC30313 Certificate III in Concreting Concreter AHC31410 Certificate III in Conservation and Land Management Park Ranger CPC32912 Certificate III in Construction Crane Operations Crane, Hoist or Lift Operator CPC31411 Certificate III in Construction Waterproofing Construction Trades Workers CSC30112 CSC30115 Certificate III in Correctional Practice Prison Officer LMT30307 Certificate III in Cotton Ginning Yarn Carding and Spinning Machine Operator BSB30211 BSB30215 Certificate III in Customer Engagement Call or Contact Centre Operator UEE30407 UEE30411 Certificate III in Data and Voice Communications Cabler (Data and Telecommunications) CPC30411 CPC30413 Certificate III in Demolition Earthmoving Labourer HLT31812 HLT35015 Certificate III in Dental Assisting Dental Assistant CUV30311 CUA30715 Certificate III in Design Fundamentals Visual Arts and Crafts Professionals RII32013 RII32015 Certificate III in Drilling Oil/Gas (On shore) Driller RII31813 RII31815 Certificate III in Drilling Operations Driller TLI31210 TLI31216 Certificate III in Driving Operations Truck Driver (General) LMT31207 LMT31210 Certificate III in Dry Cleaning Operations Drycleaner CHC30712 CHC30113 Certificate III in Early Childhood Education and Care Child Care Worker CHC30812 CHC30213 Certificate III in Education Support Teachers' Aide 2016 V5.0 Page 9 of 32

15 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must UEE33011 Certificate III in Electrical Fitting Electrician (General) UEE30607 UEE30611 Certificate III in Electrical Machine Repair Electrician (General) UEE30910 UEE30911 Certificate III in Electronics and Communications Electronic Equipment Trades Worker UEE30807 UEE30811 Certificate III in Electrotechnology Electrician Electrician (General) AUR31912 AUR31916 Certificate III in Elevating Work Platform Technology 10091NAT Certificate III in Employment and Training * Non-industry specific training MEM31112 Certificate III in Engineering - Composites Trade Technicians And Trades Workers Nec MEM30405 Certificate III in Engineering - Electrical/Electronic Trade Electrotechnology and Telecommunications Trades Workers MEM30305 Certificate III in Engineering - Fabrication Trade Sheetmetal Trades Worker MEM30205 Certificate III in Engineering - Mechanical Trade Mechanical Engineering Trades Workers MEM30105 Certificate III in Engineering - Production Systems Fabrication Engineering Trades Workers LMT31909 Certificate III in Engineering - TCF Mechanic Mechanical Engineering Trades Workers MEM30505 Certificate III in Engineering - Technical Mechanical Engineering Draftspersons and Technicians 10081NAT Certificate III in English for Further Study * General education - not occupationally specific UET30409 UET30812 Certificate III in ESI - Power Systems - Distribution Cable Jointing Electrical Distribution Trades Workers UET30209 UET30612 Certificate III in ESI - Power Systems - Distribution Overhead Electrical Distribution Trades Workers UET30309 UET30712 Certificate III in ESI - Power Systems - Rail Traction Electrical Linesworker UET30109 UET30512 Certificate III in ESI - Power Systems - Transmission Overhead Electrical Linesworker UEP30212 Certificate III in ESI Generation - Operations Power Generation Plant Operator SIT30612 SIT30516 Certificate III in Events ACM30510 Certificate III in Farriery Farrier AHC33311 Certificate III in Feedlot Operations Grain, Oilseed Or Pasture Farm Worker FNS30111 FNS30115 Certificate III in Financial Services Financial and Insurance Clerks CPC32812 CPC32813 Certificate III in Fire Protection Plumber (General) SIS30313 SIS30315 Certificate III in Fitness Swimming Coach or Instructor 2016 V5.0 Page 10 of 32

16 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must LMF31208 MSF30813 Certificate III in Flooring Technology Floor Finisher SFL30110 SFL30115 Certificate III in Floristry Florist FDF30111 Certificate III in Food Processing Food And Drink Factory Workers Nec FPI30111 FPI30113 FWP30116 Certificate III in Forest Growing and Management AUR31712 AUR31716 Certificate III in Forklift Technology CPC31511 Certificate III in Formwork/Falsework Carpenter SIF30308 SIF30313 Certificate III in Funeral Operations Funeral Workers Nec LMF30202 MSF30113 Certificate III in Furniture Finishing Furniture Finisher LMF30302 MSF30213 Certificate III in Furniture Making Cabinetmaker CPC32712 CPC32713 Certificate III in Gas Fitting Gasfitter UEG30211 UEG30114 Certificate III in Gas Supply Industry Operations Gasfitter FNS30511 FNS30515 Certificate III in General Insurance Insurance Agent LMF30611 MSF30413 Certificate III in Glass and Glazing Glazier SIT30513 SIT30316 Certificate III in Guiding SIH30111 SHB30416 Certificate III in Hairdressing FPI30211 FPI30213 FWP30216 Certificate III in Harvesting and Haulage HLT32912 HLT37315 Certificate III in Health Administration Medical Receptionist HLT32512 HLT33115 Certificate III in Health Services Assistance Hospital Orderly HLT32812 HLT33215 Certificate III in Health Support Services Nursing Support Worker AUR31812 AUR31816 Certificate III in Heavy Commercial Trailer Technology AUR31114 AUR31116 Certificate III in Heavy Commercial Vehicle Mechanical Technology SIT31212 SIT30416 Certificate III in Holiday Parks and Resorts AHC30310 Certificate III in Horse Breeding Horse Breeder 2016 V5.0 Page 11 of 32

17 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must 91189NSW 10229NAT Certificate III in Horse Industry Practice (Performance Horse) Horse Breeder AHC30710 Certificate III in Horticulture Gardener (General) HLT31412 HLT37115 Certificate III in Hospital/Health Services Pharmacy Support Pharmacy Technician SIT30713 SIT30616 Certificate III in Hospitality SIT30716 Certificate III in Hospitality (Restaurant Front of House) HLT32312 HLT36115 Certificate III in Indigenous Environmental Health Aboriginal and Torres Strait Islander Health Worker AHC31510 Certificate III in Indigenous Land Management Park Ranger CHC30212 CHC30312 CHC33015 Certificate III in Individual Support Personal Care Assistant CHC30408 ICA30111 ICT30115 Certificate III in Information, Digital Media and Technology ICT Support Technicians UEE31210 UEE31211 Certificate III in Instrumentation and Control Electronic Instrument Trades Worker (Special Class) FNS30610 FNS30615 Certificate III in Insurance Broking Insurance Consultant TLI31310 TLI31316 Certificate III in International Freight Forwarding (Operator) Import-Export Clerk AHC32412 Certificate III in Irrigation Farm, Forestry And Garden Workers Nec MEM30605 Certificate III in Jewellery Manufacture Jeweller CPC31912 Certificate III in Joinery Joiner CPC32211 Certificate III in Joinery (Stairs) Joiner MSL30109 MSL30116 Certificate III in Laboratory Skills AHC31610 Certificate III in Lands, Parks and Wildlife Park Ranger AHC30910 Certificate III in Landscape Construction Landscape Gardener LMT31107 LMT31110 Certificate III in Laundry Operations Laundry Worker (General) LMT30907 Certificate III in Leather Production Leather Goods Maker CUL30111 BSB31215 Certificate III in Library and Information Services Library Assistant AUR30612 AUR30616 Certificate III in Light Vehicle Mechanical Technology 2016 V5.0 Page 12 of 32

18 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must CUA30413 CUA30415 Certificate III in Live Production and Services Performing Arts Technicians Nec LGA30104 Certificate III in Local Government General Clerk LGA30304 Certificate III in Local Government (Operational Works) Earthmoving Plant Operators MEM30805 Certificate III in Locksmithing Locksmith TLI32410 TLI32416 Certificate III in Logistics Despatching and Receiving Clerk MSA30208 Certificate III in Manufacturing Technology Miscellaneous Technicians and Trades Workers MEM30705 Certificate III in Marine Craft Construction Shipwright AUR30514 AUR30516 Certificate III in Marine Mechanical Technology MAR30113 MAR30116 Certificate III in Maritime Operations (Integrated Rating) TDM30207 MAR30813 Certificate III in Maritime Operations (Marine Engine Driver Grade 2 Near Coastal) Ship's Engineer MAR30313 MAR30115 Certificate III in Maritime Operations (Marine Engine Driver Steam) Ship's Engineer MAR30413 MAR30913 Certificate III in Maritime Operations (Master up to 24 metres Near Coastal) Ship's Master MTM30111 Certificate III in Meat Processing (Boning Room) Butcher or Smallgoods Maker MTM30211 Certificate III in Meat Processing (Food Services) Butcher or Smallgoods Maker MTM30611 Certificate III in Meat Processing (General) Butcher or Smallgoods Maker MTM30311 Certificate III in Meat Processing (Meat Safety) Meat Inspector MTM30411 Certificate III in Meat Processing (Rendering) Butcher or Smallgoods Maker MTM30813 AMP30815 Certificate III in Meat Processing (Retail Butcher) Butcher or Smallgoods Maker MTM30511 Certificate III in Meat Processing (Slaughtering) Slaughterer MTM31011 Certificate III in Meat Processing (Smallgoods - Manufacture) Butcher or Smallgoods Maker BSB30307 BSB30315 Certificate III in Micro Business Operations General Clerk LMT30607 Certificate III in Millinery Clothing Trades Workers Nec TLI31710 TLI31716 Certificate III in Mobile Crane Operations Crane, Hoist or Lift Operator AUR31212 AUR31216 Certificate III in Mobile Plant Technology HLT32007 HLT32012 Certificate III in Mortuary Theatre Practice Medical Technicians Nec 2016 V5.0 Page 13 of 32

19 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must AUR30812 AUR30816 Certificate III in Motorcycle Mechanical Technology CUS30109 CUS30209 CUA30915 Certificate III in Music Industry Sound Technician CUS30309 SIB20210 SHB30315 Certificate III in Nail Technology Beauty Therapist AHC31710 Certificate III in Natural Area Restoration Park Ranger AUR30713 AUR30716 Certificate III in Outdoor Power Equipment Technology SIS30410 SIS30413 Certificate III in Outdoor Recreation Outdoor Adventure Guides CPC30611 Certificate III in Painting and Decorating Painting Trades Worker FPP30210 PPM30216 Certificate III in Papermaking Operations AHC31010 Certificate III in Parks and Gardens Gardener (General) HLT32612 HLT37415 Certificate III in Pathology Assistance Medical Technicians Nec HLT32612 HLT37215 Certificate III in Pathology Collection Pathology Collector 91454NSW 10223NAT Certificate III in Pathways to Further Study * General education - not occupationally specific SIT31113 SIT31016 Certificate III in Patisserie ACM30612 Certificate III in Pet Grooming Pet Groomer FDF30210 Certificate III in Pharmaceutical Manufacturing Chemical Plant Operator LMF30802 MSF30513 Certificate III in Picture Framing Picture Framer FDF30310 Certificate III in Plant Baking Baker CPC32412 CPC32413 Certificate III in Plumbing Plumber (General) PMB30101 PMB30107 Certificate III in Polymer Processing Plastics Production Machine Operator (General) AHC30410 Certificate III in Pork Production Pig Farmer CPC31712 Certificate III in Post-Tensioning Building Associate AHC30510 Certificate III in Poultry Production Poultry Farmer 2016 V5.0 Page 14 of 32

20 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must ICP30115 ICP30215 ICP31415 Certificate III in Print Communications Graphic Pre-press Trades Worker ICP30715 ICP31315 Certificate III in Print Manufacturing Print Finisher ICP30415 ICP30515 ICP30615 ICP31215 Certificate III in Printing Printing Machinist MSA30107 MSM30116 Certificate III in Process Manufacturing PMA30113 PMA30116 Certificate III in Process Plant Operations AHC30610 Certificate III in Production Horticulture Gardener (General) AHC31110 Certificate III in Production Nursery Nurseryperson CPP30207 CPP30211 Certificate III in Property Services (Agency) Property Manager PUA30601 PUA30613 Certificate III in Public Safety (Firefighting and Emergency Operations) Fire Fighter FPP30110 PPM30116 Certificate III in Pulping Operations RGR30202 RGR30208 Certificate III in Racing (Advanced Stablehand) Horse Trainer RGR30102 RGR30108 Certificate III in Racing (Trackrider) Horse Trainer RGR30308 Certificate III in Racing Services (Racing Administration) Dog or Horse Racing Official RGR30508 Certificate III in Racing Services (Track Maintenance) Gardener (General) TLI33113 TLI33115 Certificate III in Rail Customer Service Travel Attendants Nec TLI32511 TLI32515 Certificate III in Rail Infrastructure Railway Track Worker TLI32611 TLI32615 Certificate III in Rail Signalling Railway Signal Operator TLI32111 TLI32115 Certificate III in Rail Structures Railway Track Worker MSA30610 MSM31115 Certificate III in Recreational Vehicle Manufacturing Vehicle Body Builder UEE32010 UEE32011 Certificate III in Renewable Energy - ELV Electrotechnology and Telecommunications Trades Workers RII30413 RII30415 Certificate III in Resource Processing Engineering Production Worker 2016 V5.0 Page 15 of 32

21 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must SIR30212 SIR30312 SIR30216 Certificate III in Retail FDF30610 Certificate III in Retail Baking (Bread) Pastrycook's Assistant FDF30510 Certificate III in Retail Baking (Cake and Pastry) Pastrycook FDF30710 Certificate III in Retail Baking (Combined) Baker AHC31210 Certificate III in Retail Nursery Nurseryperson CPC30711 Certificate III in Rigging Construction Rigger CPC32612 Certificate III in Roof Plumbing Roof Plumber CPC30812 Certificate III in Roof Tiling Roof Tiler AHC32810 Certificate III in Rural Operations Stock and Station Agent FPI30711 FWP30716 Certificate III in Sawdoctoring FPI30311 FWP30316 Certificate III in Sawmilling and Processing CPC30911 Certificate III in Scaffolding Scaffolder PSP30704 PSP30712 Certificate III in School Support Services Office Manager CUF30107 CUA31015 Certificate III in Screen and Media Performing Arts Technicians SFI30611 Certificate III in Seafood Industry (Sales and Distribution) Sales Assistant (General) UEE31410 UEE31411 Certificate III in Security Equipment Electronic Equipment Trades Worker AHC33512 Certificate III in Seed Testing Technicians And Trades Workers Nec AHC32910 Certificate III in Shearing Shearer CPC31812 Certificate III in Shopfitting Carpenter and Joiner CPC32111 Certificate III in Signage Signwriter LMF30902 MSF30613 Certificate III in Soft Furnishing Upholsterer CPC31011 Certificate III in Solid Plastering Solid Plasterer SIS30513 SIS30115 Certificate III in Sport and Recreation Sports and Fitness Workers SIS30612 SIS30613 Certificate III in Sport Career Oriented Participation Sportspersons 2016 V5.0 Page 16 of 32

22 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must SIS30712 SIS30713 Certificate III in Sport Coaching Other Sports Coach or Instructor AHC31310 Certificate III in Sports Turf Management Greenkeeper CPC31111 Certificate III in Steelfixing Structural Steel and Welding Trades Workers HLT31112 HLT37015 Certificate III in Sterilisation Services Sterilisation Technician TLI33513 TLI33516 Certificate III in Stevedoring Waterside Worker CPC32311 CPC32313 Certificate III in Stonemasonry (Monumental/Installation) Stonemason RII30113 RII30115 Certificate III in Surface Extraction Operations Miner MSA30309 MSM30216 Certificate III in Surface Preparation and Coating Application CPP30112 CPP30216 Certificate III in Surveying and Spatial Information Services CPP31212 Certificate III in Swimming Pool and Spa Service Technicians And Trades Workers Nec UEE30707 UEE30711 Certificate III in Switchgear and Controlgear Electrician (General) CPP30507 Certificate III in Technical Security Electrical or Telecommunications Trades Assistant LMT31807 Certificate III in Technical Textiles and Non-wovens Textile And Footwear Production MacHine Operators Nec ICT30215 Certificate III in Telecommunications Digital Reception Technology Telecommunications Technician ICT30713 ICT30415 Certificate III in Telecommunications Network Build and Operate Cabler (Data and Telecommunications) ICT30213 ICT30313 ICT30813 ICT30515 Certificate III in Telecommunications Technology Electronic Instrument Trades Worker (General) LMT30407 Certificate III in Textile Fabrication Canvas Goods Fabricator LMF30502 MSF30313 Certificate III in Timber and Composites Machining Wood Machinist FPI30511 FWP30516 Certificate III in Timber Manufactured Products FPI30611 FWP30616 Certificate III in Timber Merchandising FPI30911 FWP30916 Certificate III in Timber Truss and Frame Design and Manufacture SIT30112 SIT30116 Certificate III in Tourism SIT31312 SIT30216 Certificate III in Travel 2016 V5.0 Page 17 of 32

23 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must RII30213 RII30215 Certificate III in Underground Coal Operations Miner RII30313 RII30315 Certificate III in Underground Metalliferous Mining Miner LMF31002 MSF30713 Certificate III in Upholstery Upholsterer CPP30911 CPP30115 Certificate III in Urban Pest Management Pest Controller AHC31810 Certificate III in Vertebrate Pest Management Pest Controller 10098NAT Certificate III in Vocational and Study Pathways * General education - not occupationally specific CPC31211 Certificate III in Wall and Ceiling Lining Fibrous Plasterer CPC31311 Certificate III in Wall and Floor Tiling Wall and Floor Tiler TLI31610 TLI31616 Certificate III in Warehousing Operations Storeperson PRM30509 CPP30711 Certificate III in Waste Management Recycling or Rubbish Collector MEM31010 Certificate III in Watch and Clock Service and Repair Watch and Clock Maker and Repairer NWP30107 NWP30215 Certificate III in Water Industry Operations Waste Water or Water Plant Operator AHC31910 Certificate III in Weed Management Farm, Forestry And Garden Workers Nec RII32213 RII32215 Certificate III in Well Servicing Operations Driller's Assistant FDF30411 Certificate III in Wine Industry Operations Winery Cellar Hand FPI30411 FWP30416 Certificate III in Wood Panel Products FPI30811 FWP30816 Certificate III in Woodmachining AHC33010 AHC33013 Certificate III in Wool Clip Preparation Wool Classer BSB30712 BSB30715 Certificate III in Work Health and Safety Safety Inspector CUV40211 CUA40615 Certificate IV in Aboriginal and Torres Strait Islander Cultural Arts Community Arts Worker HLT40113 Certificate IV in Aboriginal and/or Torres Strait Islander Primary Health Care J Aboriginal and Torres Strait Islander Health Worker HLT40213 Certificate IV in Aboriginal and/or Torres Strait Islander Primary Health Care Practice J Aboriginal and Torres Strait Islander Health Worker 91562NSW Certificate IV in Aboriginal Family Health (Family Violence, Sexual Assault and Child Protection) Health Professionals FNS40611 FNS40615 Certificate IV in Accounting Accounts Clerk MEA40611 MEA40615 Certificate IV in Aeroskills (Avionics) J Aircraft Maintenance Engineer (Avionics) 2016 V5.0 Page 18 of 32

24 This Schedule includes NSW Skills List qualifications eligible for government funding under Smart and Skilled in qualifications include full qualifications at Certificate III and below, including Foundation Skills, and all and course codes may change or be replaced or superseded; these are marked in the column on the updated List. Training providers should enrol students in the new qualification once they have it on their scope. Providers must MEA40711 MEA40715 Certificate IV in Aeroskills (Mechanical) J Aircraft Maintenance Engineer (Mechanical) MEA41011 MEA41015 Certificate IV in Aeroskills (Mechatronics) J Aircraft Maintenance Engineer (Avionics) MEA41311 MEA41315 Certificate IV in Aeroskills (Structures) J Aircraft Maintenance Engineer (Structures) CHC40108 CHC40212 CHC43015 Certificate IV in Ageing Support Aged or Disabled Carer AHC41010 Certificate IV in Agribusiness Stock and Station Agent AHC40110 Certificate IV in Agriculture Farmers and Farm Managers MEA40911 MEA40915 Certificate IV in Aircraft Surface Finishing J Aircraft Maintenance Engineer (Structures) CHC40412 CHC43215 Certificate IV in Alcohol and Other Drugs Community Worker HLT31512 HLT42512 HLT43015 Certificate IV in Allied Health Assistance Therapy Aide ACM40110 Certificate IV in Animal Control and Regulation Animal Attendants And Trainers Nec SFI40111 Certificate IV in Aquaculture Aquaculture Worker CUV40511 CUA40815 Certificate IV in Arts Administration Program or Project Administrator HLT41312 HLT47415 Certificate IV in Audiometry Medical Technicians Nec 22078VIC Certificate IV in Auslan Community Worker AUR40212 AUR40216 Certificate IV in Automotive Mechanical Diagnosis AUR40812 AUR40816 Certificate IV in Automotive Mechanical Overhauling AVI40408 AVI40216 Certificate IV in Aviation (Aviation Supervision) FNS41011 FNS42015 Certificate IV in Banking Services Credit and Loans Officer (Aus) / Finance Clerk (NZ) SIB40110 SHB40115 Certificate IV in Beauty Therapy Beauty Therapist FNS40211 FNS40215 Certificate IV in Bookkeeping Bookkeeper CPC40110 Certificate IV in Building and Construction (Building) Building Associate BSB40212 BSB40215 Certificate IV in Business Office and Practice Managers BSB41910 BSB41915 Certificate IV in Business (Governance) Office and Practice Managers 2016 V5.0 Page 19 of 32