EQUIVALENCE Between ISO STANDARDS and NATIONAL STANDARDS Concerning Gear Technology
|
|
- Poppy Mathews
- 7 years ago
- Views:
Transcription
1 Between IO TANDARD and NATIONAL TANDARD 1/7 TC 60 TC 60 DOC 60 N 590 (Revision of IO 53:1974) IO 53 Cylindrical gears for general and heavy engineering -- Basic rack TC 60 (Revision of IO 54:1977) IO 54 Cylindrical gears for general engineering and for heavy engineering -- Modules TC 60 (Revision of IO 2490:) IO/DI 2490 olid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module -- Nominal dimensions TC 60/JWG-1: Wind Turbine Gearboxes TC60/JWG-1 IO Wind turbines art 4: Design and specification of gearboxes TC 60/WG 9: Acceptance Code for Gears TANDARD IN ROJCT TC60/WG 9 (Revision of IO :1993) IO Acceptence code for gears: art 1 - Determination of the airborne sound power levels emitted by gear units TC 60/WG 10: nclosed Gear Drives TC60/WG 10 (ubished 1 st Oct 99) IO/TR Gears -- Industrial nclosed gear drives TANDARD DIN 867 NF IO 53 UNI 6587 B B IO 53 Was AGMA DIN UNI 6586 B B IO 53 NF IO 54 B 5221 ANI/AGMA 1102-A03 UBLICATION or ROJCT WITHDRAWN TATU of Also ANI/AGMA 6006-A03 DIN B and 2 ANI/AGMA 6025-D98 NF IO ANI/AGMA 6113-A06 FD IO/TR
2 Between IO TANDARD and NATIONAL TANDARD 2/7 TC 60/WG 2: Accuracy of Gears TANDARD UBLICATION or ROJCT TATU of TC60/WG 2 (Revision of IO 1328:1975) IO Cylindrical gears -- IO system of accuracy -- art 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth TC60/WG 2 DOC 60/-/2 N 566 (ubished ) IO Cylindrical gears -- IO system of accuracy -- art 2: Definitions and allowable values of deviations relevant to radial composite deviation and runout TC60/WG 2 (ubished 1992) IO TR Cylindrical gears -- Code of inspection practice -- art 1 Inspection of corresponding flanks of gear teeth TC60/WG 2 (ubished ) IO/TR Cylindrical gears -- Code of inspection practice -- art 2 Inspection of radial composite deviations, runout, tooth thickness and backlash TC60/WG 2 (ubished ) IO/TR Cylindrical gears -- Code of inspection practice -- art 3: Recommendation relevant to blanks, center distance, parallelism of axes TC60/WG 2 (ubished ) IO/TR Cylindrical gears -- Code of inspection practice art 4: recommendations relative to surface texture and tooth contact pattern checking TC60/WG 2 (ubished ) IO/TR Cylindrical gears -- Code of inspection practice art 5: Recommendations relative to evaluation of gear measuring instruments TC60/WG2 (ubished ) IO Bevel gears IO system of accuracy TC60/WG2 IO 18653: Gears valuation of instruments for the measurement of individual gears DIN , -2 DIN 3963 B NF IO UNI IO ANI/AGMA A01 B NF IO UNI IO ANI/AGMA A05 DIN 3960 B IO TR FD IO TR AGMA A02 FD IO TR B IO TR AGMA A05 FD IO TR B IO TR AGMA A99 FD IO TR B IO TR Was AGMA 906-A94 FD IO TR AGMA 931-A02 NF IO ANI/AGMA 2009-B01 ANI/AGMA 2110-A94 ANI/AGMA 2113-A97 ANI/AGMA 2114-A98 NF IO WITHDRAWN R --
3 Between IO TANDARD and NATIONAL TANDARD 3/7 TC 60/C 1/WG 4 : Terminology and Notation of Gears TC60/C1/WG 4 (Revision of IO 701:) IO 701 International gear notation -- ymbols for geometrical data TC60/C1/WG 4 (Revision of IO :1983) IO Glossary of gear terms -- art 1 : Definitions related to geometry TC60/C1/WG 4 IO : Glossary of gear terms -- art 2 : Definitions related to worm gear geometry TC60/C1/WG 4 IO 10825:1995 Gears Wear and damage to teeth -- Terminology TC 60/C 1/WG 7 : Worm Gears TANDARD DIN 3999 NF IO 701 B UNI 6773 AGMA 900-G00 DIN , -2, -3 DIN 868 DIN 3975 NF IO B IO UNI , -2, -3 ANI/AGMA 1012-G05 DIN NF IO Will be B IO UNI ANI/AGMA 1012-G05 DIN 3975 NF IO ANI/AGMA UBLICATION or ROJCT R TATU of TC60/C1/WG 7 IO/TR 10828: Worms gears Geometry of worm profiles TC60/C1/WG 7 IO/DI Gears Calculation of load capacity of worm gears FD IO/TR B IO TR B 721 art 2 DIN 3996 B 721 art 2 ANI/AGMA 6034-B92 ANI/AGMA 6135-A R Cylindrical nveloping
4 Between IO TANDARD and NATIONAL TANDARD 4/7 TC 60/C 2/WG 6 : Gear Calculation TC60/C2/WG 6 IO : Calculation of the load capacity of spur and helical gears art 1 : Basic principles, introduction and general influence factors TC60/C2/WG 6 IO : Calculation of the load capacity of spur and helical gears art 2 : Calculation of surface durability (pitting) TC60/C2/WG 6 IO : Calculation of load capacity of spur and helical gears art 3 : Calculation of tooth bending strength TC60/C2/WG 6 IO : Calculation of load capacity of spur and helical gears art6: Calculation of service life under variable load TC60/C2/WG 6 IO 9083 Calculation of load capacity of spur and helical gears Application to marine gears TC60/C2/WG 6 IO 9085 Calculation of load capacity of spur and helical gears Application for industrial gears TANDARD DIN B IO B UNI , -2 ANI/AGMA 2101-D04 NF IO DIN B IO B UNI ANI/AGMA 2101-D04 NF IO DIN B IO B UNI ANI/AGMA 2101-D04 NF IO DIN ANI/AGMA 6032-A94 NF IO DIN ANI/AGMA 6032-A94 DIN NF ANI/AGMA 6113-A06 UBLICATION or ROJCT R 1990 R TATU of / / / / / / /
5 Between IO TANDARD and NATIONAL TANDARD 5/7 TC 60/C 2/WG 6 : Gear Calculation TC60/C2/WG 6 IO/TR : Gears Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears art 1 : Flash temperature method TC60/C2/WG 6 IO/TR : Gears -- Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- art 2: Integral temperature method TC60/C2/WG 6 IO urface temper etch after grinding TANDARD FD IO/TR AGMA 925-A03 FD IO/TR DIN AGMA 925-A03 FD IO ANI/AGMA 2007-C00 UBLICATION or ROJCT 1995 TATU of TC60/C2/WG 6 IO Gears -- Thermal capacity art 1: Rating gear drives with thermal equilibrium at 95 C sump temperature TC60/C2/WG 6 IO Gears -- Thermal capacity art 2: Thermal load-carrying capacity TC 60/C 2/WG 11 : High peed nclosed Gear Units (AI 613) TC60/C2/WG 11 IO Gears -- pecifications for high speed enclosed gear units AGMA IO ANI/AGMA 6113-A06 ANI/AI 613 DIN N IO TC 60/C 2/WG 12 : Load Carrying capacity of oils TC60/C2/WG 12 IO Gears FZG test procedures art 1: FZG test method A/8, 3/90 for relative scuffing load-carrying capacity of oils TC60/C2/WG 12 IO Gears FZG test procedures art 2: FZG step load test A10/16, 6R/120 for relative scuffing loadcarrying capacity of high oils TC60/C2/WG 12 IO Gears FZG test procedures art 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases DIN IO ANI/ATM D
6 Between IO TANDARD and NATIONAL TANDARD 6/7 TC 60/C 2/WG 13 : Bevel Gears TC60/C2/WG 13 (was in TC60/C2/WG 6 before ) IO Calculation of load capacity of bevel gears -- art 1: Introduction and general influence factors TANDARD ANI/AGMA --B97 UBLICATION or ROJCT TATU of / TC60/C2/WG 13 (was in TC60/C2/WG 6 before ) IO Calculation of load capacity of bevel gears -- art 2: Calculation of surface durability (pitting) ANI/AGMA --B97 / TC60/C2/WG 13 (was in TC60/C2/WG 6 before ) IO Calculation of load capacity of bevel gears -- art 3: Calculation of tooth root strength ANI/AGMA --B97 / TC60/C2/WG 13 IO Bevel and hypoid gear geometry ANI/AGMA --B97 /
7 Between IO TANDARD and NATIONAL TANDARD 7/7 TC 60/C 2/WG 14 : trength and Quality of Materials TC60/C2/WG 14 (was in TC60/C2/WG 6 before ) IO Calculation of load capacity of spur and helical gears -- art 5: trength and quality of materials Other documents in charge of TC 60 TC 60 IO 677 traight bevel gears for general engineering and heavy engineering -- Basic rack TC60 IO 678 traight bevel gears for general engineering and heavy engineering Modules TC 60 IO 1340 Cylindrical gears Information to be given to the manufacturer by the purchaser in order to obtain the gear required TC 60 IO 1341 traight bevel gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required TC 60 IO 4468 Gear hobs -- ingle-start -- Accuracy requirements TC 60/WG9 IO Acceptence code for gears: art 2 Determination of mechanical vibrations of gear units during acceptance testing TANDARD DIN B IO ANI/AGMA D04 B 545 UNI 6588 B 545 UNI 6586 DIN UNI 7462 AGMA -910-C90 FD DIN B 436-1, UNI 7463 FD B 5221 ANI/AGMA 1102-A03 B ANI/AGMA 6000-B96 UBLICATION or ROJCT R TATU of / TATU OF : : TRICTLY QUIVALNT : ARTIALY QUIVALNT / : ARTIALY QUIVALNT IN RVIION : TRICTLY QUIVALNT except FORWARD
Standards for gears EC Regulations and standardisation. 1 October 2015 JTEKT Torsen Europe Strepy-Bracquegnies
Standards for gears EC Regulations and standardisation 1 October 2015 JTEKT Torsen Europe Strepy-Bracquegnies Dirk De Moor Agoria Responsible for the sector operator Sirris-Agoria Technical regulations
More informationEstablishing Gear. Standards for Global Trade
GEARS & TRANSMISSIONS Workshop paper VI [ 113 ] Establishing Gear Standards for Global Trade by Joe T. Franklin, Jr. President, AGMA Establishing Technical Gear Standards for Global Trade Brief History
More informationDirect Gear Design for Optimal Gear Performance
Direct Gear Design for Optimal Gear Performance Alex Kapelevich (AKGears, LLC), Thomas McNamara (Thermotech Company) The paper presents the Direct Gear Design an alternative method of analysis and design
More informationTechnical Product Specification (TPS)
ISO Standards collection Technical Product Specification (TPS) Contents ISO 1:2002 Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification
More informationHelical Gears K HG 1-20 R. Table of Contents. Catalog Number of KHK Stock Gears. Helical Gears. (Example) Direction of Helix (R) No.
Table of Contents Special Characteristics, Points of Caution in Selecting and Using... page 130 KHG Ground... page 134 SH... page 144 Catalog Number of KHK Stock Gears The Catalog Number for KHK stock
More informationDRAFTING MANUAL. Gears (Bevel and Hypoid) Drafting Practice
Page 1 1.0 General This section provides the basis for uniformity in engineering gears drawings and their technical data for gears with intersecting axes (bevel gears), and nonparallel, nonintersecting
More informationFormulas for gear calculation external gears. Contents:
Formulas for gear calculation external gears Contents: Relationship between the involute elements Determination of base tooth thickness from a known thickness and vice-versa. Cylindrical spur gears with
More informationModule 7 Screw threads and gear manufacturing methods
Module 7 Screw threads and gear manufacturing methods Lesson 32 Manufacturing of Gears. Instructional objectives At the end of this lesson, the students will be able to (i) State the basic purposes of
More information6.6 GEAR MANUFACTURING. Introduction. Gear forming
Valery Marinov, Manufacturing Technology Gear Manufacturing 123 6.6 GEAR MANUFACTURING Introduction Because of their capability for transmitting motion and power, gears are among the most important of
More informationGears and How Their World is Changing
Gears and How Their World is Changing by Neville W. Sachs, P.E. Neville W. Sachs, P.E., PLLC 1 The Plan Discuss the more important terms Explain some types of gears and their operation Describe some basic
More informationHOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
More informationGear Cutting Tools. Hobbing Gear Milling. Leitz Metalworking Technology Group
Gear Cutting Tools Hobbing Gear Milling Leitz Metalworking Technology Group Important information Important information 4 Services 5 An introduction to FETTE 6 Page Important information Product range
More informationMachine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
More informationModule 2 GEARS. Lecture 3 - INVOLUTE SPUR GEARS
Module 2 GEARS Lecture 3 - INVOLUTE SPUR GEARS Contents 3.1 Introduction 3.2 Standard tooth systems for spur gears 3.3 Profile shifted gears 3.4 Involutometry 3.5 Design of gear blanks 3.1 INTRODUCTION
More informationSplined connections with involute splines based on reference diameters Part 1: Principles
March 2006 DIN 5480-1 Splined connections with involute splines based on reference diameters Part 1: Principles Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser Teil 1: Grundlagen Supersedes
More informationContact Mechanics in Gears A Computer-Aided Approach for Analyzing Contacts in Spur and Helical Gears
Two Contact Mechanics in Gears A Computer-Aided Approach for Analyzing Contacts in Spur and Helical Gears Master s Thesis in Product Development MARCUS SLOGÉN Department of Product and Production Development
More informationTopics. Introduction Gear schematics Types of gears Measuring gears
Gear Measurement Topics Introduction Gear schematics Types of gears Measuring gears What is a gear? A gear is a wheel with teeth that mesh together with other gears. Gears change the : speed torque (rot.
More informationCOMPUTER AIDED GEOMETRIC MODELLING OF CYLINDRICAL WORM GEAR DRIVE HAVING ARCHED PROFILE S.
Vol. 9 No. COMPUTER AIDED GEOMETRIC MODELLING O CYLINDRICAL WORM GEAR DRIVE HAVING ARCHED PROILE S. Bodzás Department of Mechanical Engineering, University of Debrecen, H-48 Debrecen, Ótemető str. -4.
More informationSystematic Optimisation of Gearboxes for Hybrid and Electric Vehicles in Terms of Efficiency, NVH and Durability
Systematic Optimisation of Gearboxes for Hybrid and Electric Vehicles in Terms of Efficiency, NVH and Durability Dr. Artur Grunwald GKN Driveline 1 Content of presentation Scope and introduction Gearbox
More informationThe Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob
technical The Influence of Tool Tolerances on the Gear Quality of a Gear Manufactured by an Indexable Insert Hob Mattias Svahn, Lars Vedmar and Carin Andersson Recently, a new type of hob with carbide
More informationGear Reference Guide
W.M. Berg manufactures several styles of gears. Each gear has and serves its own particular application. Listed below are brief descriptions and application notes for the variety of available styles. Further
More informationDirect Gear Design for Spur and Helical Involute Gears
Direct Gear Design for Spur and Helical Involute Gears Alexander L. Kapelevich and Roderick E. Kleiss This paper presents an alternative method of analysis and design of spur and helical involute gears.
More informationGEAROLOGY 2-1 SPUR GEARS SPUR GEARS
GEAROLOGY 2-1 2 2-2 GEAROLOGY COMMON APPLICATIONS: Spur gears are used to Now that you ve been introduced to both Boston Gear and some of the basics of our Gearology course which we like to call Power
More informationModule 2- GEARS. Lecture 9 - SPUR GEAR DESIGN
Module 2- GEARS Lecture 9 - SPUR GEAR DESIGN Contents 9.1 Problem 1 Analysis 9.2 Problem 2 Spur gear 9.1 PROBLEM 1 SPUR GEAR DESIGN In a conveyor system a step-down gear drive is used. The input pinion
More informationGEAROLOGY 4-1 WORMS AND WORM GEARS WORMS AND WORM GEARS
GEAROLOGY 4-1 4 4-2 GEAROLOGY COMMON APPLICATIONS: Worm and worm gear sets are used in many, everyday products including: electrical mixers, hubometers, right Now that you have an understanding of two
More informationTooling concepts Gear milling
Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing
More informationCrowning Techniques in Aerospace Actuation Gearing
Crowning Techniques in Aerospace Actuation Gearing Anngwo Wang and Lotfi El-Bayoumy (Copyright 2009 by ASME Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers
More informationModule 2 - GEARS Lecture 7 - SPUR GEAR DESIGN
Module 2 - GEARS Lecture 7 - SPUR GEAR DESIGN Contents 7.1 Spur gear tooth force analysis 7.2 Spur gear - tooth stresses 7.3 Tooth bending stress Lewis equation 7.4 Tooth bending stress AGMA procedure
More informationIMIA. Wind Turbine Generators. Claims. Codan Insurance / September 2007 Risk Engineer Truels Kjer
IMIA. Wind Turbine Generators. Claims. Codan Insurance / September 2007 Risk Engineer Truels Kjer Claims involving the main components of the turbine. September 2007 / Codan Insurance / Truels Kjer Page
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationCoal Handling Plant Alignment Standards For Shaft To Shaft Alignment. By Makarand Joshi M.Tech
Coal Handling Plant Alignment Standards For Shaft To Shaft Alignment By Makarand Joshi M.Tech 1.0 Abstract: - Shaft alignment is a technical skill that is not common in the construction and maintenance
More informationIntroduction of the new gearbox design standard: a gap analysis between IEC 61400-4 and ISO 81400-4
Introduction of the new gearbox design standard: a gap analysis between IEC 61400-4 and ISO 81400-4 Giovanni Nappi, M.Sc. DNV GL Renewables Certification Giovanni.Nappi@dnvgl.com Niels Lerke, B.Sc. DNV
More informationThe software for all applications.
The software for all applications. QUINDOS by Hexagon Metrology GmbH is probably the most powerful software in the field of dimensional metrology. Due to its open architecture QUINDOS can not only be connected
More informationComparative Analysis of Tooth-Root Strength Using ISO and AGMA Standards in Spur and Helical Gears With FEM-based Verification
Andrzej Kawalec e-mail: ak@prz.edu.pl Jerzy Wiktor Rzeszów University of Technology, Department of Mechanical and Aerospace Engineering, ul. W. Pola 2, Rzeszów, PL-35-959, Poland Dariusz Ceglarek Department
More informationCoordinate Measuring Machines SCANPAK. Bulletin No. 2075. Scanning module for evaluation of workpiece contours, and 3D digitizing of surfaces
Coordinate Measuring Machines SCANPAK Bulletin No. 2075 Scanning module for evaluation of workpiece contours, and 3D digitizing of surfaces SCANPAK CNC or Manual Where analysis of forms and shapes commonly
More informationInvoMilling AGILE GEAR MANUFACTURING
InvoMilling AGILE GEAR MANUFACTURING Cutting lead times in gear manufacturing Machining gears normally requires dedicated tools for the specific gear profile. With the patented InvoMilling process it is
More informationNORD GEARED MOTORS F 1000. Getriebebau NORD. www.nord.com D R I V E S Y S T E M S
I N T E L L I G E N T D R I V E S Y S T E M S, W O R L D W I D E S E R V I C E S NORD GEARED MOTORS F 1000 GB www.nord.com Getriebebau NORD D R I V E S Y S T E M S Unicase Housing: The Optimal Design Getriebebau
More informationAnalysis and Testing of Gears with Asymmetric Involute Tooth Form and Optimized Fillet Form for Potential Application in Helicopter Main Drives
Analysis and Testing of Gears with Asymmetric Involute Tooth Form and Optimized Fillet Form for Potential Application in Helicopter Main Drives F.W. Brown, S.R. Davidson, D.B. Hanes, D.J. Weires and A.
More informationHolroyd. Precision Worm & Helical Gears. Superior Gear Technology. www.renold.com
Holroyd Precision Worm & Helical Gears Superior Gear Technology www.renold.com 2 I Renold Precision Gears Introduction Over 125 Years of Excellence Over 125 years have elapsed since John Holroyd & Co.
More informationPitting and Bending Fatigue Evaluations of a New Case-Carburized Gear Steel
Pitting and Bending Fatigue Evaluations of a New Case-Carburized Gear Steel Timothy Krantz and Brian Tufts Management Summary The power density of a gearbox is an important consideration for many applications
More informationErich Lacher Präzisionsteile
Nexxus Industriewerbung 2893 12.13 Printed in Germany Erich Lacher Präzisionsteile GmbH & Co. KG Certified by Im Altgefäll 22 D 75181 Pforzheim Phone: +49 (0)7231/6097-0 Fax: +49 (0)7231/6097-60 E-Mail:
More informationHow To Design A Bevel And Hypoid Gear Drive
New Developments in Tooth Contact Analysis (TCA) and Loaded TCA for Spiral Bevel and Hypoid Gear Drives Dr. Qi Fan and Dr. Lowell Wilcox This article is printed with permission of the copyright holder
More informationThe word teamster today means a truck driver,
Page 47 Heron of Alexandria The word teamster today means a truck driver, but originally it meant a wagon driver, someone who drives a team of horses, mules or oxen. Over 2000 years ago teamsters in the
More informationMeasurement Types in Machinery Monitoring
February 2014 Measurement Types in Machinery Monitoring Online machinery monitoring for rotating equipment is typically divided into two categories: 1. Protection Monitoring 2. Prediction Monitoring This
More informationPLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
More informationThis last dimension, the thread pitch diameter, is the most important as it is a reference from which all other thread measurements originate
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the design and use of various thread types and how they are produced.
More information\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
More informationAlways Following the Sun
DLR Always Following the Sun Bearing solutions for tracking systems Photovoltaic & Solar Thermal Systems Photovoltaic and solar thermal systems: Improved performance with tracking systems with high-precision
More informationINTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
More informationMartin Sprocket & Gear, Inc.
GEAR MANUAL Published by Martin Sprocket & Gear, Inc. Dave Walton, Technical Advisor TABLE OF CONTENTS Introduction.....................................1 Work.......................................2 Power......................................2
More informationEFFECT OF OBSTRUCTION NEAR FAN INLET ON FAN HEAT SINK PERFORMANCE
EFFECT OF OBSTRUCTION NEAR FAN INLET ON FAN HEAT SINK PERFORMANCE Vivek Khaire, Dr. Avijit Goswami Applied Thermal Technologies India 3rd Floor,C-Wing,Kapil Towers, Dr. Ambedkar Road, Pune- 411 1 Maharashtra,
More informationGeared up for success.
your global specialist Special knowledge Geared up for success. Useful information on oil lubrication of gears Selection of the right gear oil 4 Overview of Klüber gear oils 16 Viscosity selection 18 Oil
More informationMechanical kiln inspection. Improves and ensures kiln availability by optimisation of: Kiln axis Kiln shell ovality Axial balance Kiln crank
Mechanical OK.qxd 20/01/05 14:16 Side 1 Mechanical kiln inspection Improves and ensures kiln availability by optimisation of: Kiln axis Kiln shell ovality Axial balance Kiln crank Introduction MECHANICAL
More informationAN OVERVIEW OF GEAR MANUFACTURING PROCESSES
AN OVERVIEW OF GEAR MANUFACTURING PROCESSES AN OVERVIEW OF GEAR MANUFACTURING PROCESSES Gear manufacturing has been one of the most complicated of the metal cutting processes. From the beginning of the
More informationANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX INTRODUCTION Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg.
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationCutting Processes. Simulation Techniques in Manufacturing Technology Lecture 7
Cutting Processes Simulation Techniques in Manufacturing Technology Lecture 7 Laboratory for Machine Tools and Production Engineering Chair of Manufacturing Technology Prof. Dr.-Ing. Dr.-Ing. E.h. Dr.
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationHigh-Performance Sintered-Steel Gears for Transmissions and Machinery: A Critical Review
High-Performance Sintered-Steel Gears for Transmissions and Machinery: A Critical Review Dr.-Ing. Senad Dizdar Management Summary Except for higher-end gear applications found in automotive and aerospace
More informationHigh Precision Bearings for Combined Loads
High Precision Bearings for Combined Loads Axial/radial bearings Axial angular contact ball bearings Axial/radial bearings with angular measuring system added competence for your success With their forward-looking
More informationIn 1905, encouraged by President Theodore
8. Measurement rack and Field In 1905, encouraged by President heodore Roosevelt, the Intercollegiate Athletic Association of the United States was founded in New York City. heir original purpose was to
More informationIndustrial Gear Oils and General Lubricating Oils
Innovative Lubricants Need Experienced Application Engineers FUCHS Industrial Lubricants Reduced Friction, High Efficiency Outstanding Performance Consultation with an experienced Application Engineer
More informationIcon Glossary. Icon Glossary. Technical Information N N. Number of Flutes. Center Cutting. Lengths. Coatings. Helix Angle. Ball Nose.
Icon Glossary Z3 Number of Flutes aterial Center Cutting Coatings Lengths Iron pecial Icon Glossary ALtima TiAlN TiCN TiN Fordlube Hardened (35-65Rc) 30 Helix Angle Ball Nose Non-Ferrous N N Neck Relief
More informationOverall Indicator: The student: recognizes the effects of forces acting on structures and mechanisms
Grade 5 Performance Task: Disaster Recovery Content Connections Assessment Criterion Understanding of basic concepts Overall Indicator: The student: recognizes the effects of forces acting on structures
More informationHigh precision ball bearings
GMN Paul Müller Industrie GmbH & Co. KG Äussere Bayreuther Str. 230 D-90411 Nuremberg Phone: +49 911-5691-0 Fax: +49 911-5691-221 www.gmn.de High precision ball bearings Ball bearings: Phone: +49 911-56
More informationSurface Damage Caused by Gear Profile Grinding and Its Effects on Flank Load Carrying Capacity
Surface Damage Caused by Gear Profile Grinding and Its Effects on Flank Load Carrying Capacity Prof. Dr.-Ing. Fritz Klocke and Dr.-Ing. Heiko Schlattmeier Management Summary Instances of damage to discontinuous
More informationDevelopment of optimal tooth flank in spiral bevel gears by contact analysis and measurement
Technical Paper Development of optimal tooth flank in spiral bevel gears by contact analysis and measurement Tetsu Nagata 1) Hayato Shichino 1) Yukio Tamura 1) Hitoshi Kawai 2) Yoriko Ohta 3) Masaharu
More informationGeometry and dimensional tolerances of engine bearings
Geometry and dimensional tolerances of engine bearings Dr. Dmitri Kopeliovich (Research & Development Manager.) 1. Hydrodynamic lubrication Engine bearings operate mostly in the hydrodynamic regime of
More informationRickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More information8 AMSOIL ACTION NEWS / MARCH
Maintaining a requires the use of many lubricants, each specifically designed to perform a certain task or set of tasks. The most common lubricant requiring routine attention from motorists is engine oil.
More informationDesign Aspects of Robot Manipulators
Design Aspects of Robot Manipulators Dr. Rohan Munasinghe Dept of Electronic and Telecommunication Engineering University of Moratuwa System elements Manipulator (+ proprioceptive sensors) End-effector
More information12. REAR WHEEL/BRAKE/SUSPENSION
12 12 12-0 SERVICE INFORMATION... 12-1 REAR BRAKE... 12-5 TROUBLESHOOTING... 12-2 REAR SHOCK ABSORBER... 12-8 REAR WHEEL... 12-3 REAR FORK... 12-9 SERVICE INFORMATION GENERAL INSTRUCTIONS When installing
More informationMDM-Metrosoft Guide to GearSoft program Versions 5.06 5.07 5.08. Guide to GearSoft Software Code: 193 Versions 5.06 5.07 5.08
MDM-Metrosoft Guide to GearSoft program Versions 5.06 5.07 5.08 Guide to GearSoft Software Code: 193 Versions 5.06 5.07 5.08 MDM-Metrosoft - Guide to GearSoft program Versions 5.06 5.07 5.08 Page 2 of
More informationUser orientated simulation strategy to analyse large drive trains in SIMPACK
User orientated simulation strategy to analyse large drive trains in SIMPACK SIMPACK User Meeting / Dipl.-Ing. Thomas Hähnel / Dipl.-Ing. Mathias Höfgen 21. / 22. November 2007 Content Motivation, state
More informationImproved Broaching Steel Technology
Improved Broaching Steel Technology Michael E. Burnett TimkenSteel Corporation 1835 Dueber Ave. SW, Canton Ohio 44706 Phone: (330) 471-3273 Email: michael.burnett@timkensteel.com Key Words: Alloy Steel,
More informationT A B L E O F C O N T E N T S:
T A B L E O F C O N T E N T S: Important Information on Product Changeovers: Works Test Certificate for all ZKLDF Bearings page 2 News from the Schaeffler Organization Germanischer Lloyd Is Certifying
More informationDrawing an Approximate Representation of an Involute Spur Gear Tooth Project Description
Drawing an Approximate Representation of an Involute Spur Gear Tooth Project Description Create a solid model and a working drawing of the 24 pitch gears specified below. It is only necessary to create
More informationHow To Use Castrol Spincawh
Hyspin AWH Series High Quality Mineral Oils with a Viscosity Index Improver CASTROL HYSPIN AWH is a range of high quality mineral oils with a viscosity index improver, designed for operations over a wide
More informationLOW VOLTAGE D.C. MOTORS & GEARBOX UNITS
LOW D.C. MOTORS & GEARBOX UNITS Printed on 100% recycled paper. 918D SERIES SINGLE RATIO METAL GEARBOX (RE280 MOTOR/RE 280/1 MOTOR) NEW! NEW! NEW! NEW! NEW! WITH 2mm OUTPUT SHAFT (15:1 ONLY) WITH 4mm OUTPUT
More informationin-service inspections www.sgs.com
in-service inspections www.sgs.com Minimising down -time for wind turbines One of the major concerns in investing in wind farm projects is related to turbine availability, which represents the risk of
More informationAGENDA: Understanding what makes Wind Different Wind Power Applications Application Requirements Windpower Oil Windpower Greases Summary
1 FUCHS PETROLUB AG AGENDA: Understanding what makes Wind Different Wind Power Applications Application Requirements Windpower Oil Windpower Greases Summary FUCHS LUBRICANTS Fuchs Lubricants is a $2 Billion
More informationCatalog. Industrial Gear Units Helical and Bevel-Helical Gear Units ML..V..N Series Vertical mounting position Torque classes from 150 knm - 805 knm
Drive Technology \ Drive Automation \ System Integration \ Services Catalog Industrial Gear Units Helical and Bevel-Helical Gear Units ML..V..N Series Vertical mounting position Torque classes from 150
More informationSeries 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
More informationDiametral Pitch Gear Ratios Herringbone Gears Idler Gear Involute Module Pitch Pitch Diameter Pitch Point. GEARS-IDS Optional Gear Set Straight Edge
105 Webster St. Hanover Massachusetts 02339 Tel. 781 878 1512 Fax 781 878 6708 www.gearseds.com Spur Gear Terms and Concepts Description In order to design, build and discuss gear drive systems it is necessary
More informationCoating Solutions for Wind Energy
Coating Solutions for Wind Energy Wind energy is deemed to be an especially eco-friendly and favorable energy source for power generation. Whether wind power plants work efficiently and economically strongly
More informationMiter Gears M MSG 2-20 R. Table of Contents. Catalog Number of KHK Stock Gears. Miter Gears. (Example) Direction of Spiral ( R ) No.
Table of Contents Special Characteristics, Point of Caution in Selecting and Using Miter Gears...page 19 MMSG Ground Spiral Miter Gears...page 200 SMSG Ground Spiral Miter Gears...page 202 MMSA(B) Finished
More informationGuidelines for Securing by Welding of Chain Cable Studs in Service Guidance for Anchoring Equipment in Service
(July 2003) (Rev.1 July 2014) Guidelines for Securing by Welding of Chain Cable Studs in Service Guidance for Anchoring Equipment in Service 1. General 1.1 This document gives the guidelines for maximum
More informationSpur Gears. Catalog Number of KHK Stock Gears. Spur Gears S S G 1-15. Gears. Spur. Helical. Gears. Internal. Gears. Racks. CP Racks. & Pinions.
MSA MSB round SSS round Pinion Shafts SS round Series m1 ~ Page 3 m1. ~ 3 Page 0 m0. ~ Page 2 SSS Pinion Shafts SS Steel Series SSA Steel Hubless m0. ~ 3 Page SSY Steel Thin Face m0. ~ Page SSAY Steel
More informationSection. Tolerances. Aluminum Extrusion Manual. 4th Edition
Section 8 Tolerances Aluminum Extrusion Manual 4th Edition Section 8 How straight is straight enough? How flat is flat enough? How uniform must a wall thickness be in order to be acceptable? These are
More informationOptimum Design of Worm Gears with Multiple Computer Aided Techniques
Copyright c 2008 ICCES ICCES, vol.6, no.4, pp.221-227 Optimum Design of Worm Gears with Multiple Computer Aided Techniques Daizhong Su 1 and Wenjie Peng 2 Summary Finite element analysis (FEA) has proved
More informationHarmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l
D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS
More informationDevelopment of Custom Gear Design and Modelling Software Solution
Development of Custom Gear Design and Modelling Software Solution Robert Basan*, Marina Franulović and Božidar Križan Department of Mechanical Engineering Design Faculty of Engineering, University in Rijeka
More informationMACHINE TOOL DRIVES. Learning Objectives:
MACHINE TOOL DRIVES Learning Objectives: Broadly Classification of transmission of rotary motion Stepped Speed Drives in Machine Tools Belting Pick-Off Gears Gear boxes AP &GP for steeping speeds of gears
More informationWind Turbine Gearbox Reliability Database, Condition Monitoring, and O&M Research Update
Wind Turbine Gearbox Reliability Database, Condition Monitoring, and O&M Research Update Shawn Sheng GRC Annual Meeting 2015 February 17 18, 2015 Golden, Colorado Photo by Dennis Schroeder, NREL 21883
More informationPVD coatingsin transmissions: case studies I rivestimenti PVD su componenti di trasmissioni: esempi
PVD coatingsin transmissions: case studies I rivestimenti PVD su componenti di trasmissioni: esempi Paola Recanati Oerlikon Balzers Italy- Precision Components Product Manager Claudio Torrelli Oerlikon
More informationHow Noise is Generated by Wind Turbines The mechanisms of noise generation. Malcolm Hayes Hayes McKenzie Partnership Ltd Machynlleth & Salisbury
How Noise is Generated by Wind Turbines The mechanisms of noise generation Malcolm Hayes Hayes McKenzie Partnership Ltd Machynlleth & Salisbury Overview Main sources of noise from wind turbines Causes
More informationTHRUST NEEDLE ROLLER AND CAGE ASSEMBLIES Assembly Dimensions, Load Ratings, Thrust Washer and Piloting Dimensions... 480-487
Thrust Bearings Page Nomenclature............................................ 474 Introduction............................................. 476 Identification.............................................
More informationCOMPANY PROFILE. Cutting edge solutions for industrial applications of gear reducers and gearmotors
COMPANY PROFILE Cutting edge solutions for industrial applications of gear reducers and gearmotors 2 CONTENTS Who we are...4 A timeline of our history...6 Mission...8 Vision...9 Our values...11 Rossi Group
More informationIntroduction to Accuracy and Repeatability in Linear Motion Systems
Introduction to accuracy and repeatability in linear motion systems By Gary Rosengren, Director of Engineering Tolomatic, Inc. About the Author Gary Rosengren is Director of Engineering at Tolomatic and
More information