Multiswitches. TMS, THA & TMM series. Multiswitches

Transcription

1 TMS, THA & TMM series TMU Unicable series TMS 17xC and 17xT series TMS 13xC and 13xT series TMS 9xC series TMS 5xC series TMS 2xC/ TMS 5x series TMM 5x cascadable TMM 5x terminated TMM 4x cascadable TMS 9xP series TMS 5xP series TMP 9x series TMP 5x series TMPR 5 seriesx TMS 55 tap/tmm splitter TMS amplifiers TMM launch amplifiers THA 340E/TLA 340E amplifiers TMS power supplies TMM/TMS accessories TRIAX 192

2 TMU Unicable Cascade The Unicable multiswitch is cascadable and suitable for all common Quatro LNBs and secures unlimited reception of programs transmitted by a satellite. Moreover, there is a second output for connection of an additional receiver in standard LNB mode. Feeding of all existing satellite transponders including not yet occupied frequencies. and HDTV-compatible Complies with the Unicable standard 4 SAT inputs + one terrestrial input Extra output for connection of an additional receiver in standard mode. SAT range with 10 db gain. Superflat housing Power supply included TMU 518 TMU 918 Unicable Unicable Art. No: Number of inputs 4 SAT, 1 TER 4 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Subscriber outputs pcs. 4 4 Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db 4 X X 10.0 Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db 8 8 Return loss TER inputs db Return loss TER outputs db 8 8 Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv LNB current max. ma Line power voltage (TER) V Line power current (TER) ma Switch commands V/kHz 13V/18V - 13V/22 khz - 18V/22 khz 13V/18V - 13V/22 khz - 18V/22 khz Supply voltage V/DC Power supply VAC Power supply current A 1.5 (47-63 HZ) 1.5 (47-63 HZ) Connectors F-female F-female Colourcoding of IF and TER inputs Ja Ja Temperature range degrees Dimensions (H x D x W) 157 x 51 x x 51 x TRIAX

3 TMS 17xC Cascade Triax TMS 17x series is an easy-to-install multiswitch system for use where 4 satellite positions are required. A terrestrial input is available to allow terrestrial as well as satellite signals to be available on all subscriber outputs. TMS 17x has an active satellite signal path and a passive terrestrial signal path allowing a terrestrial return path if needed. Satellite position switching is done via DiSEqC signals from the subscriber set-top box. TMS 17x6C Terminated TMS 17x8C TMS 17x12C TMS 17x16C Art. No: Number of inputs pcs. 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Number of outputs pcs. 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz (active) (active) (active) (active) Frequency range TER MHz (passive) (passive) (passive) (passive) Gain - SAT [ MHz] db Gain - TER [ MHz] db Isolation LNB to LNB db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv LNB power supply max. A Impedance input/output Ohm Switching voltage 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst Supply voltage V/DC 15.0 (± 0.5) 15.0 (± 0.5) 15.0 (± 0.5) 15.0 (± 0.5) Power supply External External External External Power link (for amplifiers in line) Yes Yes Yes Yes Connectors F-female F-female F-female F-female Control LEDs Green for power, Yellow for power link Green for power, Yellow for power link Green for power, Yellow for power link Green for power, Yellow for power link Colourcoding - IF and TER inputs Yes Yes Yes Temperature range degrees Dimensions (H x D x W) 125 x 55 x x 55 x x 55 x x 55 x 355 TRIAX 194

4 TMS 17xT Terminated Triax TMS 17x - 16 polarities (4 positions + 1 ter.) Triax TMS 17x series is an easy-to-install multiswitch system for use where 4 satellite positions are required. A terrestrial input is available to allow terrestrial as well as satellite signals to be available on all subscriber outputs. TMS 17x has an active satellite signal path and a passive terrestrial signal path allowing a terrestrial return path if needed. Satellite position switching is done via DiSEqC signals from the subscriber set-top box. TMS 17x6T Terminated TMS 17x8T Terminated TMS 17x12T Terminated TMS 17x16T Terminated Art. No: Number of inputs pcs. 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER Number of outputs pcs. 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER 16 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz (active) (active) (active) (active) Frequency range TER MHz (passive) (passive) (passive) (passive) Gain - SAT [ MHz] db Gain - TER [ MHz] db Isolation LNB to LNB db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv LNB power supply max. A Impedance input/output Ohm Switching voltage 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst 13V-18V - 13V/22kHz DiSEqC 2.0 Toneburst Supply voltage V/DC 15.0 (± 0.5) 15.0 (± 0.5) 15.0 (± 0.5) 15.0 (± 0.5) Power supply External External External External Power link (for amplifiers in line) Yes Yes Yes Yes Connectors F-female F-female F-female F-female Control LEDs Green for power, Yellow for power link Green for power, Yellow for power link Green for power, Yellow for power link Green for power, Yellow for power link Colourcoding - IF and TER inputs Yes Yes Yes Yes Temperature range degrees Dimensions (H x D x W) 125 x 55 x x 55 x x 55 x x 55 x TRIAX

5 TMS 13xC Cascade & 13xT Terminated Triax TMS 13x - 12 polarities (3 positions + 1 ter.) Triax TMS 13x series is an active and cascadable SAT-IF multi switch series for 3 SAT positions (12 SAT polarities + terrestrial) in versions with 8 to 24 subscriber outputs.suitable for analogue and digital reception. TMS 13x8C TMS 13x12C TMS 13x16C TMS 13x24C TMS 13x12T Terminated Art. No: Number of inputs pcs. 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER Insertion loss - trunkline TER db 6.0 (± 1.0) 6.0 (± 1.0) 6.0 (± 1.0) 10.0 (± 1.0) Insertion loss - trunkline SAT db 7.0 (± 2.0) 7.0 (± 2.0) 7.0 (± 2.0) 10.0 (± 1.0) Number of outputs pcs. 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER 12 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz (active) Frequency range TER MHz (85 to 862 MHz with active return path) Return path TER MHz 5 to 65 (switchable on/off) (active) (85 to 862 MHz with active return path) 5 to 65 (switchable on/off) (active) (85 to 862 MHz with active return path) 5 to 65 (switchable on/off) (active) (85 to 862 MHz with active return path) 5 to 65 (switchable on/off) (active) (85 to 862 MHz with active return path) 5 to 65 (switchable on/off) Gain - SAT [ MHz] db (± 2.0) Gain - TER [ MHz] db (± 2.0) Attenuation SAT Attenuation TER Equalization SAT 0-6,0 (switchable) Equalization TER Noise figure SAT < 8.0 Noise figure TER < 5.0 Isolation cross polarisation H/V db > 28.0 > 28.0 > 28.0 > 28.0 > 28.0 Isolation out-out SAT db > 30.0 > 30.0 > 30.0 > 30.0 > 30.0 Return loss db > 10.0 (all ports) > 10.0 (all ports) > 10.0 (all ports) > 10.0 (all ports) > 10.0 (all ports) Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Impedance input/output Ohm Switching voltage V/DC Ver. 13.0/ Hor (± 1.0) Ver. 13.0/ Hor (± 1.0) Ver. 13.0/ Hor (± 1.0) Ver. 13.0/ Hor (± 1.0) Ver. 13.0/ Hor (± 1.0) Supply voltage V/DC 18.0 (± 0.5) 18.0 (± 0.5) 18.0 (± 0.5) 18.0 (± 0.5) 18.0 (± 0.5) Power supply External External External External External Power supply current ma Connectors F-female F-female F-female F-female F-female Colourcoding - IF and TER inputs Yes Yes Yes Yes Yes Temperature range deg Dimensions (H x D x W) 202 x 53 x x 53 x x 53 x x 53 x x 53 x 334 TRIAX 196

6 TMS 9xC Cascade Triax TMS 9x - 8 polarities (2 positions + 1 ter.) For two satellite positions in smaller networks the Triax TMS 9X series is the right choice. For easy installation all inputs are coloured identical to Triax multicable colours. All multi have integrated loop-in of VHF/UHF. TMS 9x4C TMS 9x6C TMS 9x8C TMS 9x12C TMS 9x16C Art. No: Number of inputs pcs. 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER Insertion loss - trunkline TER db 4.0 (± 1.0) 4.0 (± 1.0) 5.0 (± 1.0) 5.0 (± 1.0) 5.0 (± 1.0) Insertion loss - trunkline SAT db 2.0 (± 2.0) 3.0 (± 2.0) 4.0 (± 2.0) 4.0 (± 2.0) 4.0 (± 2.0) Number of outputs pcs. 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz (active) (active) (active) (active) (active) Frequency range TER MHz (active) (active) (active) (active) (active) Return path TER 5-65 (passive) 5-65 (passive) 5-65 (passive) 5-65 (passive) Gain - SAT (with 5 db slope) db -3.0 to 2.0 (± 1.0) -3.0 to 2.0 (± 1.0) -3.0 to 2.0 (± 1.0) Gain - TER ( MHz) db Isolation LNB to LNB db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Impedance input/output Ohm Switching V/DC 14V/18V 14V/22kHz DiSEqC V/18V 14V/22kHz DiSEqC V/18V 14V/22kHz DiSEqC V/18V 14V/22kHz DiSEqC V/18V 14V/22kHz DiSEqC 2.0 Supply voltage V/DC 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Power supply External External External External External Max. current pass per F-con. ma Connectors F-female F-female F-female F-female F-female Colourcoding - IF and TER inputs Yes Yes Yes Yes Yes Temperature range deg Dimensions (H x D x W) 124 x 51 x x 51 x x 51 x x 51 x x 51 x TRIAX

7 TMS 5xC Cascade, ext. PSU Triax TMS 5x - 4 polarities (2 positions + 1 ter.) Suitable for building custom cascade system using TMS 55 TAP units and external power supply. TMS 5X6 TMS 5X8 Art. No: Number of inputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER Subscriber outputs pcs. 6 8 Frequency range SAT MHz Frequency range TER MHz / 85 to 862MHz with passive return path / 85 to 862MHz with passive return path Return path TER MHz Through loss - Trunk SAT 4.0 (± 1.0) 7.0 (± 1.0) Through loss - Trunk TER 4.0 (± 1.0) 6.0 (± 1.0) Gain - SAT [ MHz] db Gain - TER [ MHz] db Input polarity gain control SAT db 0, 6, 12 or , 6, 12 or Isolation cross polarisation H/V db > 28.0 > 28.0 Isolation out-out SAT db > 30.0 > 30.0 Return loss SAT inputs db > 10.0 > 10.0 Return loss SAT outputs db > 10.0 > 10.0 Return loss TER inputs db > 10.0 > 10.0 Return loss TER outputs db > 10.0 > 10.0 Return loss TAP outputs db > 10.0 > 10.0 Impedance input/output Ohm Switching V/DC 13V (± 1.0)/ 17.5V (± 1.0) 13V (± 1.0)/ 17.5V (± 1.0) Supply voltage V/DC 18.0 (± 1.0) 18.0 (± 1.0) Max. current ma Connectors F-female F-female Colourcoding of IF and TER inputs Yes Yes Temperature range degrees Dimensions (H x D x W) 150 x 45 x x 45 x 182 TRIAX 198

8 TMS 2xC Cascade & TMS 5x Single, ext. PSU TMS 2x 2 polarities (1 SAT position), no TER. system for many users. Simple and easy to install. For external power supply. Triax TMS 5x 4 polarities (2 positions + 1 ter.) Suitable for building custom cascade system using TMS 55 TAP units and external power supply. TMS 2X4C TMS 2X8C TMS 5X4 Single Art. No: Number of inputs pcs. 2 SAT 2 SAT 4 SAT, 1 TER Insertion loss - trunkline SAT db Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Gain - SAT [ MHz] db Gain - TER [ MHz] db 4.0 Noise figure SAT db Isolation LNB to LNB db Isolation trunk to trunk db Isolation SAT to TER db 22 Isolation TER to SAT db 22 Isolation cross polarisation H/V db Isolation out-out SAT db 30 Isolation out-out TER db 30 Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db 11 Return loss TER outputs db 7 Return loss TAP outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv 88 Impedance input/output Ohm Switching V/DC 13V/18V - 13V/22kHz 13V/18V - 13V/22kHz 13V/18V - 13V/22kHz Supply voltage V/DC (± 1.0) Power supply External External External Max. 13 V/18V kg < 80 < 80 Max. current to each H/V LNB ma < 500 < 500 Max. current pass per F-connector ma 600 Input voltage dbµv Connectors F-female F-female F-female Colourcoding of IF and TER inputs Yes Yes Yes Temperature range degrees Dimensions (H x D x W) 90 x 51 x x 51 x x 51 x TRIAX

9 TMM 5x Cascade TMM 5x cascadable multi - few to many users. 4 satellite polarities and 1 TERrestrial input, combined output. Wide range of launch and line amplifiers available TMM 5x4 TMM 5x8 TMM 5x12 TMM 5x16 Art. No: Number of inputs pcs. 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR Max. input level - SAT (IMD3-35dB) dbµv Max. input level - TER (IMD3-60dB) dbµv Number of outputs pcs. 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR 4 x SAT, 1 x TERR Subscriber outputs pcs Frequency range SAT MHz Tap loss SAT db Tap loss TER db Through loss - Trunk SAT db Through loss - Trunk TER db Input polarity gain control SAT db 4 x x x x 12.0 Input polarity gain control TER db 1 x x x x 12.0 Noise figure SAT db < 8.0 < 8.0 < 8.0 < 8.0 Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Return loss switch out - SAT db Return loss switch out - TER db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Line power voltage (TER) V/mA 12.0/ / / /50.0 Switch commands 13V/18V - 13V-22kHz - 18V-22kHz - DiSEqC 2.0 Supply voltage V/DC 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Power supply current ma < 15.0 < 15.0 < 15.0 < 15.0 Power connector 2 x x x x 1.3 Max. current - each output ma < < < < Connectors F-female F-female F-female F-female Through voltage TER ma Colourcoding of IF and TER inputs Yes Yes Yes Yes Temperature range deg Dimensions (H x D x W) 130 x 140 x x 140 x x 140 x x 140 x 38 TRIAX 200

10 TMM 5x Terminated TMM 5x cascadable multi - few to many users. 4 satellite polarities and 1 TERrestrial input, combined output. Wide range of launch and line amplifiers available TMM 5x12 Terminated Art. No: Number of inputs pcs. 4 x SAT, 1 x TERR Max. input level - SAT (IMD3-35dB) dbµv Max. input level - TER (IMD3-60dB) dbµv Number of outputs pcs. 4 x SAT, 1 x TERR Subscriber outputs pcs. 12 Frequency range SAT MHz Tap loss SAT db 12.0 Tap loss TER db 12.0 Through loss - Trunk SAT db 2.5 Through loss - Trunk TER db 3.0 Input polarity gain control SAT db 4 x 12.0 Input polarity gain control TER db 1 x 12.0 Noise figure SAT db < 8.0 Isolation SAT to TER db 30.0 Isolation TER to SAT db 30.0 Isolation cross polarisation H/V db 28.0 Isolation out-out SAT db 30.0 Isolation out-out TER db 30.0 Return loss SAT inputs db 12.0 Return loss SAT outputs db 12.0 Return loss TER inputs db 12.0 Return loss TER outputs db 12.0 Return loss switch out - SAT db 10.0 Return loss switch out - TER db 10.0 Output level -35 db IMD3 dbµv 95.0 Output level 60dB IMD3 dbµv 88.0 Line power voltage (TER) V/mA 12.0/50.0 Switch commands 13V/18V - 13V-22kHz - 18V-22kHz - DiSEqC 2.0 Supply voltage V/DC 15.0 (± 1.0) Power supply current ma < 15.0 Power connector 2 x 1.3 Max. current - each output ma < Connectors F-female Through voltage TER ma 50 Colourcoding of IF and TER inputs Yes Temperature range deg Dimensions (H x D x W) 220 x 140 x TRIAX

11 TMM 4x Cascade TMM 5x cascadable multi - few to many users. 4 satellite polarities, 1 SAT position. Versions for 8, 12 and 16 subscriber outputs. Adjustable attenuator per polarity (0-12 db). L ow power consumption. Small footprint, compact design, fits into tight spaces. 2-, 3- and 4-way DiSEqC bridger units with TER loop-through available to expand a one-position TMM system into a full 2-, 3-, or 4-satellite position reception system. Wide range of launch and line amplifiers available TMM 4x4 TMM 4x8 TMM 4x12 TMM 4x16 Art. No: Number of inputs pcs. 4 x SAT 4 x SAT 4 x SAT 4 x SAT Max. input level - SAT (IMD3 - dbµv dB) Insertion loss - trunkline SAT db Number of outputs pcs. 4 x SAT 4 x SAT 4 x SAT 4 x SAT Subscriber outputs pcs Frequency range SAT MHz Tap loss SAT db Input polarity gain control SAT db 4 x x x x 12.0 Noise figure SAT db < 8.0 < 8.0 < 8.0 < 8.0 Isolation cross polarisation H/V db Isolation out-out SAT db Return loss SAT inputs db Return loss SAT outputs db Return loss TAP outputs db Output level -35 db IMD3 dbµv Switch commands 13V/18V - 13V-22 khz - 18V-22 khz 13V/18V - 13V-22 khz - 18V-22 khz Switching voltage V 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Supply voltage V/DC 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Supply voltage from receiver ma < 90.0 < 90.0 < 90.0 < 90.0 Power supply current ma < 15.0 < 15.0 < 15.0 < 15.0 Power connector 2 x x x x 1.3 External power supply NO (DC on all 4 trunk lines via power inserter or amplifier) Max. current to each output ma < < < < (supplied by set top box) Connectors F-female F-female F-female F-female Colourcoding of IF and TER inputs Yes Yes Yes Yes Temperature range deg Dimensions (H x D x W) 220 x 140 x x 140 x x 140 x x 140 x 38 TRIAX 202

12 TMS 9xP Single w/psu TMS single/stand alone multi switch solutions - 4 to 16 users - offer a flexible and cost efficient system for providing one or two position satellite reception and distribution in small and medium sized networks. Low power consumption. TMS 9x4P TMS 9x6P TMS 9x8P TMS 9x12P TMS 9x16P Art. No: Number of inputs pcs. 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER Number of outputs pcs. 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Gain - SAT [ MHz] db Gain - TER [ MHz] db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Impedance input/output Ohm Switching V/DC 13V/18V - 13V/22kHz - - DiSEqC 2.0 Supply voltage V/DC 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Power supply Included Included Included Included Included Max. current pass ma per F-connector Connectors F-female F-female F-female F-female F-female Colourcoding of IF and Yes Yes Yes Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 103 x 71x x 71x x 71x x 71x x 71x TRIAX

13 TMS 5xP Single w/psu TMS single/stand alone multi switch solutions - 4 to 16 users - offer a flexible and cost efficient system for providing one or two position satellite reception and distribution in small and medium sized networks. Low power consumption. TMS 5x4P TMS 5x6P TMS 5x8P TMS 5x12P TMS 5x16P Art. No: Number of inputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Number of outputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Gain - SAT [ MHz] db Gain - TER [ MHz] db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Impedance input/output Ohm Switching V/DC 13V/18V - 13V/22kHz - Supply voltage V/DC 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) 15.0 (± 1.0) Power supply Included Included Included Included Included Max. current pass ma per F-connector Connectors F-female F-female F-female F-female F-female Colourcoding of IF and Yes Yes Yes Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 103 x 71x x 71x x 71x x 71x x 71x 559 TRIAX 204

14 TMP 9x Single w/psu Triax TMP 9x is an is an excellent solution to the dilemma in many stand-alone multi switch installations: The more subscribers you want to supply from one multi switch, the longer and different the cables will be. Using traditional multi this will present subscribers with very different signal levels, and can cause all kind of problems. With adjustable attenuator per polarity (0-15 db). Slide switch for long, medium and short subscriber cable runs (0, 6 and 12 db). 8 satellite polarities and 1 terrestrial input, combined output. Integrated switch mode power supply. Versions for 4 to 32 subscriber outputs per unit. TMP 9X8 TMP 9X12 TMP 9X16 Art. No: (EU plug) Art. No: (UK plug) Number of inputs 8 SAT, 1 TER 8 SAT, 1 TER 8 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db 4 x x x 10.0 Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Output level control - long cable db Output level control - med. cable db Output level control - short cable db LNB current max. ma Line power voltage (TER) V Line power current (TER) ma Switch commands 13V/18V - 13V /22 khz - 18V /22 khz - DiSEqC 2.0 Supply voltage V/DC Power supply VAC Power supply current A 1.5 (47-63 HZ) 1.5 (47-63 HZ) 1.5 (47-63 HZ) Connectors F-female F-female F-female Colourcoding of IF and TER inputs Yes Yes Yes Temperature range deg Dimensions (H x D x W) 157 x 51 x x 51 x x 51 x TRIAX

15 TMP 9x Single w/psu Triax TMP 9x is an is an excellent solution to the dilemma in many stand-alone multi switch installations: The more subscribers you want to supply from one multi switch, the longer and different the cables will be. Using traditional multi this will present subscribers with very different signal levels, and can cause all kind of problems. With adjustable attenuator per polarity (0-15 db). Slide switch for long, medium and short subscriber cable runs (0, 6 and 12 db). 8 satellite polarities and 1 terrestrial input, combined output. Integrated switch mode power supply. Versions for 4 to 32 subscriber outputs per unit. TMP 9X24 TMP 9X32 Art. No: (EU plug) Art. No: (UK plug) Number of inputs 8 SAT, 1 TER 8 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db 4 X X 15.0 Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Output level control - long cable db Output level control - med. cable db Output level control - short cable db LNB current max. ma Line power voltage (TER) V Line power current (TER) ma Switch commands 13V/18V - 13V /22 khz - 18V /22 khz - DiSEqC 2.0 Supply voltage V/DC Power supply VAC Power supply current A 1.5 (47-63 HZ) 1.5 (47-63 HZ) Connectors F-female F-female Colourcoding of IF and TER inputs Yes Yes Temperature range deg Dimensions (H x D x W) 157 x 51 x x 51 x 340 TRIAX 206

16 TMP 5x Single w/psu Triax TMP 5x is an is an excellent solution to the dilemma in many stand-alone multi switch installations: The more subscribers you want to supply from one multi switch, the longer and different the cables will be. Using traditional multi this will present subscribers with very different signal levels, and can cause all kind of problems. With adjustable attenuator per polarity (0-15 db). Slide switch for long, medium and short subscriber cable runs (0, 6 and 12 db). 4 satellite polarities and 1 terrestrial input, combined output. Integrated switch mode power supply. Versions for 4 to 32 subscriber outputs per unit. TMP 5X6 TMP 5X8 TMP 5X12 Stand alone Art. No: (EU plug) Art. No: (UK plug) Number of inputs 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db 4 X X X 10.0 Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Output level control - long cable db Output level control - med. cable db Output level control - short cable db LNB current max. ma Line power voltage (TER) V Line power current (TER) ma Switch commands 13V/18V - 13V/22 khz - 18V/22 khz Supply voltage V/DC Power supply VAC Power supply current A 1.5 (47-63 HZ) 1.5 (47-63 HZ) 1.5 (47-63 HZ) Connectors F-female F-female F-female Colourcoding of IF and Ja Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 157 x 51 x x 51 x x 51 x TRIAX

17 TMP 5x Single w/psu Triax TMP 5x is an is an excellent solution to the dilemma in many stand-alone multi switch installations: The more subscribers you want to supply from one multi switch, the longer and different the cables will be. Using traditional multi this will present subscribers with very different signal levels, and can cause all kind of problems. With adjustable attenuator per polarity (0-15 db). Slide switch for long, medium and short subscriber cable runs (0, 6 and 12 db). 4 satellite polarities and 1 terrestrial input, combined output. Integrated switch mode power supply. Versions for 4 to 32 subscriber outputs per unit. TMP 5x16 TMP 5X24 TMP 5X32 Art. No: (EU plug) Art. No: (UK plug) Number of inputs 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Insertion loss - trunkline TER db Insertion loss - trunkline SAT db Subscriber outputs Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db 4 x X x 10.0 Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Output level control - long cable db Output level control - med. cable db Output level control - short cable db LNB current max. ma Line power voltage (TER) V Line power current (TER) ma Switch commands 13V/18V - 13V/22 khz - 18V/22 khz Supply voltage V/DC Power supply VAC Power supply current A 1.5 (47-63 HZ) 1.5 (47-63 HZ) 1.5 (47-63 HZ) Connectors F-female F-female F-female Colourcoding of IF and Yes Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 157 x 51 x x 51 x x 51 x 340 TRIAX 208

18 TMPR 5x Single, STB powered Triax TMPR 5x multi These STB remote powered, stand alone multi are designed to be installed where no landlord supply exists. TMPR 5X8 Remote powered TMPR 5X12 Remote powered TMPR 5X16 Remote powered Art. No: Number of inputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Insertion loss - TER db Insertion loss - SAT db Subscriber outputs pcs Frequency range SAT MHz Frequency range TER MHz Slope control TER db Input polarity gain control SAT db Input polarity gain control TER db Isolation SAT to TER db Isolation TER to SAT db Isolation cross polarisation H/V db Isolation out-out SAT db Isolation out-out TER db Return loss SAT inputs db Return loss SAT outputs db Return loss TER inputs db Return loss TER outputs db Output level -35 db IMD3 dbµv Output level 60dB IMD3 dbµv Impedance input/output Ohm Switching V/DC 13V/18V - 13V/22kHz - Power supply Remote power from set-top box Max. current pass ma per F-connector Connectors F-female F-female F-female Colourcoding of IF and Yes Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 147 x 56 x x 56 x x 56 x TRIAX

19 Trunk TAPs and splitters Taps and Splitters Expand the TMS 5x series into a cascadable system. Using TMS 55 taps makes it possible to construct large cascadable systems. Different tapvalues allow fine-tuning of available signal levels. By using splitters you can balance your distribution system the best possible way. The TAP product allows you to extend any cascade into very large systems using a passive TAP technique in the trunk, and 3 active TAPs on each level. TMS TAP TMS TAP TMS TAP TMS TAP Art. No: Number of inputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Number of outputs pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Number of taps pcs. 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Frequency range SAT MHz Frequency range TER MHz Tap loss SAT db Tap loss TER db Through loss SAT db 1.2 ± ± ± ±1.0 Through loss TER db 1.5 ± ± ± ±1.5 Isolation trunkline db > 30.0 > 30.0 > 30.0 > 30.0 Connectors F-female F-female F-female F-female Colourcoding of IF and Yes Yes Yes Yes TER inputs Temperature range degrees Dimensions (H x D x W) 145 x 42 x x 42 x x 42 x x 42 x 119 TRIAX 210

20 Trunk TAPs and splitters Taps and Splitters Expand the TMS 5x series into a cascadable system. Using TMS 55 taps makes it possible to construct large cascadable systems. Different tapvalues allow fine-tuning of available signal levels. By using splitters you can balance your distribution system the best possible way. The TAP product allows you to extend any cascade into very large systems using a passive TAP technique in the trunk, and 3 active TAPs on each level. TMT 553 TAP TMS 510 Splitter TMM 5x10 Splitter TMM 4x10 Splitter Art. No: Number of inputs F-con 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER 4 SAT, 1 TER Number of trunk inputs 5 Insertion loss - TER db < 2 Insertion loss - SAT db < 2 Insertion loss - trunkline TER db Typ Insertion loss - trunkline SAT db Typ Number of outputs F-con 4 SAT, 1 TER 8 SAT, 2 TER 2x4 SAT, 2x1 TER 2x4 SAT, 2x1 TER Number of trunk outputs 5 Number of taps 3 Frequency range Frequency range SAT MHz Frequency range TER MHz Through loss SAT 4.0 ± Through loss TER 6.0 ± Adjustable attenuator SAT db Adjustable attenuator TER db Isolation trunkline > 30.0 Isolation out-out SAT db > 20.0 > 20.0 Isolation out-out TER db > 22.0 > 22.0 Return loss SAT inputs db 10 Return loss SAT outputs db 10 In 15.0/out 15.0 In 15.0/out 15.0 Return loss TER inputs db 10 Return loss TER outputs db 10 In 15.0/out 15.0 In 15.0/out 15.0 Return loss switch out - SAT db 10 Return loss switch out - TER db 10 Impedance input/output Ohm 75 External power supply V/DC 18 Connectors F-female F-female F-female F-female Colourcoding of IF and TER Yes Yes Yes inputs Temperature range Dimensions (H x D x W) 195 x 183 x x 42 x TRIAX

21 Trunk Launch- and Line- Amplifiers A launch amplifier is the first amplifier in a multi switch installation, typically near the LNB and dish installation. It is designed to boost your signal to get more mileage in a long cascaded installation. Using a line amplifier you can compensate for the cable losses further down the trunk lines of your satellite distribution system. REMEMBER: Due to the laws of physics there are limits to how many line amplifiers you can add into a multi switch cascade before your signal quality deterioates beyond practical use. You may want to check out the TMS 553 TAP too. TMS 2 IF-amplifier TMS 55 IF-amplifier TMS 55 IF-amplifier - UK TMS 8 IF-amplifier Art. No: Number of inputs pcs. 2 SAT 4 SAT, 1 TER 4 SAT, 1 TER 8 SAT Number of outputs pcs. 2 SAT 4 SAT, 1 TER 4 SAT, 1 TER 8 SAT Frequency range SAT MHz Frequency range TER Gain - SAT [ MHz] db (± 2) (± 2) (4dB slope) Gain - TER [ MHz] 17 (± 2) 17 (± 2) 17 (± 2) Adjustable attenuator SAT db Adjustable attenuator TER Equalization SAT db (fixed) 5 (fixed) 0-10 Equalization TER 7-12 (adjustable) 7-12 (adjustable) Noise figure SAT db < 12.0 < 12.0 < 12.0 < 16.0 Isolation SAT to SAT > 25 Return loss SAT db Output level -35 db IMD3 dbµv Output level TER MHz Impedance input/output Ohm Supply voltage V/DC ( (via DC plug) via DC plug or trunk) (via DC plug or trunk) Power supply External power adaptor External power adaptor External power adaptor Internal power supply Connectors F-female F-female F-female F-female DC input connector F-female Phone Phone Control LEDs 2 x red Colourcoding of IF Yes Yes Yes and TER inputs Temperature range degrees Dimensions (H x D x W) 105 x 43 x x 43 x x 121 x 250 TRIAX 212

22 Trunk Launch- and Line- Amplifiers A launch amplifier is the first amplifier in a multi switch installation, typically near the LNB and dish installation. It is designed to boost your signal to get more mileage in a long cascaded installation. Using a line amplifier you can compensate for the cable losses further down the trunk lines of your satellite distribution system. REMEMBER: Due to the laws of physics there are limits to how many line amplifiers you can add into a multi switch cascade before your signal quality deterioates beyond practical use. You may want to check out the TMS 553 TAP too. TMS 9 IF-amplifier TMS 13 IF-amplifier TMS 17 IF-amplifier Art. No: Number of inputs pcs. 8 SAT, 1 TER 12 SAT, 1 TER 16 SAT, 1 TER + power link Number of outputs pcs. 8 SAT, 1 TER 12 SAT, 1 TER 16 SAT, 1 TER + power link Frequency range SAT MHz (active) Frequency range TER MHz (85 to 862 MHz with active return path) Return path TER MHz 5 to 65 (switchable on/off) 5-65 (passive) Gain - SAT [ MHz] db 14 (± 2) (± 2.0) (± 2) Gain - TER [ MHz] db 17 (± 2) 17.0 (± 2.0) 17 Attenuation SAT Attenuation TER Adjustable attenuator SAT db Adjustable attenuator TER db Equalization SAT db 5.0 (fixed) 0-6,0 (switchable) 0 or 6.0 (switchable) Equalization TER db (adjustable) (adjustable) Noise figure SAT < 8.0 < 8.0 Noise figure TER < 5.0 < 7.0 Isolation SAT to SAT 30.0 Isolation TER to SAT 22.0 Isolation cross polarisation H/V > 28.0 Isolation out-out SAT > 30.0 Return loss > 10.0 (all ports) Return loss SAT db Output level -35 db IMD3 dbµv Output level 60dB IMD3 105 Output level TER MHz dbµv Impedance input/output Ohm Switching voltage Ver. 13.0/Hor (± 1.0) Supply voltage V/DC (± 0.5) 18 (via power link) Power supply External power adaptor External External power adaptor Power supply current 1600 Connectors F-female F-female F-female Colourcoding of IF Yes Yes Yes and TER inputs Temperature range degrees Dimensions (H x D x W) 152 x 51 x x 53 x x 51 x TRIAX

23 Trunk Launch- and Line- Amplifiers A launch amplifier is the first amplifier in a multi switch installation, typically near the LNB and dish installation. It is designed to boost your signal to get more mileage in a long cascaded installation. Using a line amplifier you can compensate for the cable losses further down the trunk lines of your satellite distribution system. REMEMBER: Due to the laws of physics there are limits to how many line amplifiers you can add into a multi switch cascade before your signal quality deterioates beyond practical use. You may want to check out the TMS 553 TAP too. SAT Line amplifier TMM 44 IF-launch amplifier TMM TDA Terr. dist. amplifier TMM TER Launch amplifier TMM 55 IF-launch amplifier Art. No: Input - TER [ MHz] pcs. 1 1 Input - BI/FM [ MHz] pcs. 1 Input - BIII/DAB [ MHz] pcs. 1 Input - UHF 1 [ MHz] pcs. 1 Input - UHF 2 [ MHz] pcs. 1 Input - SAT [ MHz] pcs Number of outputs 1 SAT 4 SAT 1 TERR. 1 TERR. 4 SAT, 1 TERR. Frequency range MHz Frequency range TER Frequency range SAT Gain - TER [ MHz] db Gain - SAT [ MHz] db Slope control TER db Slope control UHF 2 db 0-10 Slope control SAT db Polarity gain control TER db Polarity gain control SAT db Isolation trunk to trunk db Return loss TER db Return loss SAT db Output level 60dB IMD3 dbµv Output level -35 db IMD3 dbµv LNB power supply max. 2x14 / 2x18 2x14 / 2x18 LNB current max Impedance input/output Ohm Supply voltage V 12/50 Power consumption ma Line powering via in- or output 18/13 (± 0.5) 18/13 (± 0.5) External power supply V/DC 15V (via trunk) 18 (via 3.5 jack) 18 (via 3.5 jack) 18 (via 3.5 jack) 18 (via 3.5 jack) Max. current to mast amplifier 12 (± 0.5) Connectors F-female F-female F-female F-female F-female DC switch (for injecting DC) Switchable Switchable Switchable Switchable Through voltage TER 12 (± 0.5) 12 (± 0.5) 12 (± 0.5) Temperature range TRIAX 214

24 Trunk Launch- and Line- Amplifiers A launch amplifier is the first amplifier in a multi switch installation, typically near the LNB and dish installation. It is designed to boost your signal to get more mileage in a long cascaded installation. Using a line amplifier you can compensate for the cable losses further down the trunk lines of your satellite distribution system. REMEMBER: Due to the laws of physics there are limits to how many line amplifiers you can add into a multi switch cascade before your signal quality deterioates beyond practical use. You may want to check out the TMS 553 TAP too. THA 340E Launch IF-amplifier TLA 340E Line IF-amplifier Art. No: Number of inputs 2 SAT, 1 TER 2 SAT Distribution outputs (SAT + Ter) 2 2 Test outputs (SAT + Ter) - 30 db 2 2 Connectors F-con female female Frequency range SAT MHz Frequency range TER MHz Return path TER (switchable) MHz Gain SAT db Gain TER db Gain return path db Noise figure SAT db Noise figure TER db 6.0 Adjustable attenuator SAT db 0-20 (on each sat input) 0-20 (on each sat input) Slope adjustment SAT db Equalizer SAT db 0-20 (on each sat input) 0-20 (on each sat input) Isolation cross polarisation H/V db > 45 > 45 Isolation out - out SAT db > 45 > 50 Isolation out - out TER db > 25 Return loss SAT inputs db Return loss SAT outputs db 8 8 Return loss TER inputs db 10 8 Return loss TER outputs db 8 8 Output level SAT (IMD3-35 db) dbµv Output level TER (IMD3-60 db) dbµv 116 Power supply VDC VDC/A VDC/1 18 VDC/ VDC/1 18 VDC/2 Switching commands khz/vdc 0/22-0/13/18 0/22-0/13/18 Power consumption per SAT-IF ma 300 max. 300 max. Temperature range o C Dimensions (H x D x W) mm 182 x 45 x x 45 x TRIAX

25 Power supplies Power supply for your multi switch installation comes in many different falvours in terms of voltage,current supply and connector. Observe that the DC output connector may be different in different switch series. Make sure you get the one that fits the multi switch you are installing. Art. No: (EU plug) Art. No: (UK plug) TMS PSU Power supply TMS 17 Power supply TMS 1820 SM Power supply TMM PSU Power supply TMM PSI Power inserter Number of inputs 4 SAT, 1 TERR. 4 SAT, 1 TERR. Insertion loss - TER db 1.5 Insertion loss - SAT db 2.5 Number of outputs pcs SAT, 1 TERR. Frequency range MHz Frequency range SAT MHz Isolation out-out SAT db 35 Isolation out-out TER db 35 Return loss SAT outputs db 11.0 Return loss TER outputs db 11.0 Output voltage V/DC 15 (± 0.5) 15 (± 0.5) 18 (± 0.5) 18 (± 0.5) 3 x 14 / 2 x 18 LNB power supply max. 13V - 18V /500 Impedance input/output Ohm Supply voltage V 18 (3.5 jack) Power supply current watt 12 Cable lenght from supply mm Max. current A 1 x x x x 1.9 Input voltage VAC Inputs (230V) pcs Connectors RCA/phone plug F-female F-female 3,5mm DC plug F-female Through voltage TER V 12.0 ± 0.5V /1.5 Colourcoding of IF and Yes Yes Yes Yes TER inputs Temperature range deg Dimensions (H x D x W) 64 x 111 x x 111 x x 111 x 35 Remarks Incl. power cable, mounting bracket and power cable with F-male connector Incl. power cable, mounting bracket and power cable with 3.5 mm mini jack Power supply unit integrated TRIAX 216

26 TMM-TMS accessories TMM-TMS accessories for multiswittches Everything you need to make a professional installation. TMM LK Connection lead TMM 75 ohm terminator TMM RPL Power lead Art. No: Connectors F-male to F-male F-female Remarks pcs. 5 pack 1 TMS 5 Terminator Block TMM F_F male quick connector TMM earth bond bar 4 in Art. No: Connectors 5 x female to male F-male to F-male 4 + ground female to male Remarks Push-on terminator block Push-on earth bond bar 217 TRIAX

27 TMM-TMS accessories TMM-TMS accessories for multiswittches Everything you need to make a professional installation. TMM 2B - 2x1 DiSEqC bridge switch TMM 3B - 3x1 DiSEqC bridge switch TMM 4B - 4x1 DiSEqC bridge switch Art. No: Number of Input pcs Number of outputs pcs Return loss db > 10.0 > 10.0 > 10.0 Connectors F-con (male/female) F-con (male/female) F-con (male/female) Temperature range C Dimensions (H x D x W) 66 x 22 x x 22 x x 22 x 149 Remarks DiSEqC switch DiSEqC switch DiSEqC switch TRIAX 218

28 Notes for your personal notes 219 TRIAX