What: Nichiban no None. Part Number: Vendor: Japantape.com Phone #: Web Address: Quantities sold in: Price:

Transcription

1 Nichiban no. 241 None Japantape.com Sleeve of multiple rolls or by the case Varies by size Paint masking, masking for raster cutting on laser engraver. Perfect level of tack; leaves no residue, won t damage surface finishes. Thin enough to conform to complex curved surfaces, cuts cleanly and easily with X-acto knife. We often use this on back decorated screen mock-ups to create multi-step paint masks; cover a piece of acrylic with Nichiban, lightly vector cut mask lines (barely cut through tape, kiss the surface of the acrylic), then cut out the masked screen from the acrylic sheet with a heavier vector pass.

2 Rio Grande Tools and Equipment Catalog None Rio Grande Jewelry Supply Free A useful resource for high quality hand tools, metal finishing equipment, investment casting supplies, and a variety of other indispensable devices for model makers and metalsmiths. If you don t find something useful in here, you re not looking hard enough.

3 JVCC DC-1503 Double Coated Film Tape None FindTape.com Single roll or by the case Varies by size Assembling prototypes. Extremely high tack and super thin (.004 ). Ideal for models that may have to come apart at some point

4 NSK Electer E-Max Micro-Motor System Rio Grande Jewelry Supply individual unit $ for basic kit Quite simply the finest rotary tool I have ever had the pleasure to work with. No flexible shaft to wear out or bind, variable speed (1,000 to 35,000 rpm), quick and easy tool changes with quick-release lever, comfortable hand piece, reversible rotation. Option to attach a second handpiece for multiple tool configurations. You ll never want to touch a Dremel again if you ever get the chance to use this.

5 Friedrich Dick Riffler Files Rio Grande Jewelry Supply Separately or set of 6 $25.50 each or $135 for the set of 6. These curved files make delicate details of parts much easier to finish. Cheaper sets are available elsewhere, but the quality of these Swiss-made tools is well worth the investment.

6 Gloves in a Bottle None Varies by region N/A 2 oz and 8 oz bottles About $5 for a 2 oz bottle and $15 for an 8 oz bottle Creates an effective barrier against the harsh chemicals we expose ourselves to every day in the workshop. Even industrial paints wash off easily with soap and water if you have this barrier on your skin. Best of all, it helps your skin retain its moisture through the day! Dries in about the same time as most body lotions, but it truly does dry; no oily residue.

7 Swanstrom Super-Flush Cutters Rio Grande Jewelry Supply individual unit $53 Flush cutting non-ferrous metal rods and wire, up to 12 gauge. Swanstrom also offers reconditioning services for their cutters through Rio Grande; call for details.

8 Grifhold Burnisher Dick Blick Art Supplies handle and three burnishing heads $6 Precise burnishing of Chromatecs. Also excellent for tracing reveal lines in Nichiban masking tape. After covering the mask area in Nichiban, burnish the reveal lines, then follow through with a sharp X-Acto blade, and peel away the unneeded tape. This produces an accurate mask for painting or texturing operations.

9 Miter-Cutting Vise/Jig Rio Grande Jewelry Supply individual unit $ Precise cutting or scoring of 45 and 90 angles in sheet, wire, or tubing. Saw along the edge of the jig perpendicular to the opening, then run a file across the cut to create flat cuts and clean, sharp angles for joints. Includes an L shaped metal pin that can be utilized as a stop to ensure consistent length for multiple cuts.

10 TherMark Varies TherMark Varies Varies by product and quantity. The 6 oz aerosol is $58.95 (covers approximately 900 sq/in.) Durable black, highly detailed marking on metal surfaces with laser engraving. Simply spray on, let dry, raster engrave desired graphics, rinse off excess material. Comes in aerosol form, self-adhesive tape, and liquid to be applied through airbrush.

11 Heavy Pressure Roller Woodcraft individual $21.99 Applying even, steady pressure to a surface. Works great for veneer, as well as taping blocks of stock down to the CNC Mill table.