Shaver Systems. DYONICS POWERMAX ELITE Handpiece. DYONICS POWER II Shaver System. Combination of high torque and speed with a lightweight design

Transcription

1 DYONICS POWERMAX ELITE Handpiece Combination of high torque and speed with a lightweight design Responds quickly to variations in tissue and bone Easy access controls and suction lever DYONICS POWER II Shaver System Combines the most aggressive arthroscopic soft tissue resection with powerful torque Efficient bone removal Compatible with all DYONICS POWER handpieces and footswitches

2 G-1 DYONICS POWER DYONICS POWER II Shaver Control System The high-performance DYONICS POWER II Shaver Control Unit offers two unique, customizable oscillate modes for efficient soft tissue resection; dual hot ports for simultaneous shaver and powered instrument operation; and an integrated flush lavage feature to rapidly clear the visual field of debris DYONICS POWER II Shaver System Control Unit (Control Unit only). All units VAC, 50/60 Hz DYONICS POWER II Shaver Control System Country Kits Country Kits include a control unit, footswitch, power cord, operations manual and diagnostic tray label Country Kit, US Country Kit, UK Country Kit, German Country Kit, Spanish Country Kit, French Country Kit, Italian Country Kit, Swedish Country Kit, Dutch Country Kit, Portuguese Country Kit, Norwegian Country Kit, Korean Call (U.S.) or contact your local representative.

3 G-2 DYONICS POWER DYONICS Shaver Handpieces For use with DYONICS POWER, DYONICS POWER II and EP-1 Control Units * DYONICS POWERMAX ELITE Handpiece with blade multi-positioning, hand controls, suction lever, 10 ft (3 m) cord * DYONICS POWERMAX ELITE Handpiece with blade multi-positioning, no hand controls, suction lever, 10 ft (3 m) cord DYONICS POWERMAX ELITE Handpiece hand-controlled with opposite-side suction lever and stiffer buttons POWERMINI Small Joint Handpiece with blade multi-positioning, hand controls, suction lever, 10 ft. (3m) cord For use with DYONICS POWER II Control System POWERMINI Small Joint Handpiece with blade multi-positioning, no hand controls, suction lever, 10 ft. (3m) cord For use with DYONICS POWER II Control System DYONICS Mini-motor Handpiece, suction lever, 10 ft (3 m) cord DYONICS POWER Ultralight Handpiece, suction lever, 10 ft (3 m) cord * Handpieces accept all blades Handpieces only work with the Single-use Extremity Blades and Burrs listed on page D-11 and F-11. Handpiece accepts all straight blades, but only ULTRA series curved blades.

4 G-3 DYONICS POWER Accessories DYONICS POWER Footswitches Low profile, cutting mode and blade window lock control, 12 ft (3.6 m) cord DYONICS POWER Footswitch, low profile, on/off Pedal-style, 12 ft (3.6 m) cord DYONICS POWER Footswitch, pedal-style, on/off DYONICS POWER II Footswitch Pedal-style, on/off or variable speed. Operates with DYONICS POWER II Shaver System Control Unit (REF ) only Sterilization Tray Sterilization Tray for DYONICS Shaver Handpieces (motor drives) (20"L x 9"W x 2"H), includes silicon matts Communication Cables DYONICS POWER Interface Cable B (used for communication between DYONICS POWER Control Unit or DYONICS POWER II Control Unit and Mitek TM fms duo TM + using Mitek 4-Way Pedal Board) DYONICS POWER II Interface Cable C (used for communication between DYONICS POWER II Control Unit, using either the DYONICS POWER II Footswitch or DYONICS Shaver Handpieces with hand controls, and Mitek fms duo+) DYONICS POWER Interface Cable E (used for communication between DYONICS POWER II Control Unit and Mitek Nextra TM Shaver System) DYONICS POWER II Interface Cable (used for communication with DYONICS 25 Pump) Call (U.S.) or contact your local representative.

5 G-4 DYONICS POWER Replacement Parts Replacement Motor Drive Cord Replacement Motor Drive Cord for DYONICS POWER handpieces (REF ) and (REF ), standard or hand control type. Not for use with POWERMAX or POWERMAX ELITE. NOTE: For standard and POWERMAX Handpieces use O-Ring. Replacement power cords and connectors AC Power Cord for DYONICS POWER and EP-1 Shaver Control Units, 3 ft (90 cm), 120 VAC 4428 AC Power Cord for DYONICS POWER and EP-1 Shaver Control Units, 12 ft (3.6 m), 120 VAC 4476 AC Power Cord for DYONICS POWER and EP-1 Shaver Control Units, 3.25 ft (1 m), 230 VAC Handpiece Connector, DYONICS POWER and EP-1 Control Unit, replacement Footswitch Connector, DYONICS POWER and EP-1 Control Unit, replacement Crimp (order 2) Lanyard Replacement Caps and Lanyards The table below will assist you in ordering replacement caps and lanyards. There are three (3) shaver handpiece motor drive cords, therefore, it is important that you reference the serial number on the motor drive cord to the table below to ensure that the proper replacement cap and lanyard is ordered. System Replacement REF Cable Serial Numbers IFU DYONICS POWER and EP-1 MDU motor cord (SCREW-ON TYPE) , TJ 5524 and HIGHER DYONICS POWER and EP-1 MDU motor cord (SCREW-ON TYPE) , TJ 2860 to TJ 5523 DYONICS POWER and EP-1 MDU motor cord (PUSH-ON CAP) * TJ 0000 to TJ 2859 DYONICS POWER and EP-1 FOOTSWITCH cord ALL PS3500EP MDU motor cord ALL Ultralight MDU motor cord (SCREW-ON TYPE) , TJ 5524 and HIGHER Replacement Motor Drive Cords Replacement Motor Drive Cord for DYONICS POWER and EP1 Mini Motor Drive Replacement Motor Drive Cord for DYONICS POWER Ultralight Motor Drive * NOTE: Soak cap does not include lanyard

6 G-5 Notes Call (U.S.) or contact your local representative.

7 G-6 Notes