Electronic Digital Indicator (0.01 / 0.001mm), PC-Series

Transcription

1 Electronic Equipment Electronic Digital Indicator (0.01 / ), PC-Series Data output and statistics transaction can be easily made by using digital indicator and resolution digital indicators are available. Standard models are equipped with preset function and conventional models deleting preset functions are available. As compact as standard dial indicators and can be placed where dial indicator is used. Application can be enlarged like statistical calculation of measured value, comprising measuring system by output signal. Granite Base USG-4 (Option) The photo shows connection sample that is mounted to granite stand and SD-76P Digital Mini Printer. Connecting Cable ZE-018 (Option) Digital Mini Printer SD-76P (Option) Release ZY-01 (option).7 Type / Standard : /46J φ9 17 R8 φ6. Release Hole 7. M PC-46J.7 Supplied with Lug back as standard models. Flat back and Lift lever are optional. 0

2 Ø6. REV.4 Type / Standard : PC-40J-f / 4J-f φ R8 0. φ9 Release hole PC-40J-f PC-4J-f φ Supplied with Flat back as standard models. Lug back and Lift lever are optional..7 Type / Popular : PC-480S / 48S φ φ φ PC-480S PC-48S.7 φ φ Release Hole Accuracy Maimum response speed Contact force Operating temp Functions Power supply Battery life Contact Point Contact point thread (ISO/JIS type) * 1000/sec 1.0N or less Supplied with Lug back as standard models. Flat back and Lift lever are optional. PC-46J 0~ * 480/sec 1.N or less* PC-40J-f or less 480/sec PC-4J-f 0~ /sec 1.8N or less* LCD display (6-digital & minus) 0~40 Preset, Zero-set, Power OM/OFF, Counting direction switching, Digimatic code output SR44 (Button Silver oide cell) Appro.,000hours in continuous service R 1. (carbide) M. P g 186g PC-480S PC-48S 0~ or less* 0.00 or less* Unlimited.0N or less* LCD display (-digital & minus) LCD display (6-digital & minus) Origin-set, Power ON/OFF, Counting direction Switching, Digimatic code output rotation(0 0g Appro. 0,000hours in continuous service 10g * The quantising error is not included. 1

3 Digital Mini Printer Multi-function mini printer for Digital Indicator Release Lever Adapter Jack 7. Input Output Adapter Open 4.9 Input Connector Output Connector Recording Paper Cover/ Recording Paper GO/NG LED Foot Switch Connector 94 Miniprinter SD-76P To print measured data, and judgement. * MODE O * TIME 1:4 *LIMIT MODE* *NO LIMIT DATA* LIMIT LIMIT.849 *NEW LIMIT DATA* TIME 1: Judgement O O4.O O Perform statistical calculations Options ZE-04 ZE-110 ZE-018 ZE-019 ZE-00 ZE-109 ZE-01 Histogram Mode 1 To print measured data, judgement, perform statistical calculations, and generate histogram. * MODE 1* TIME 1:4 *NEW LIMIT DATA* TIME 1:1 * RESULT * N MAX MIN R σn σn-1 -NG +NG P Cp Cpk DIV -NG A 1 B 1 C O D O E 1 F O G 1 H O I 1 J +NG = 1 6.O % O.99 O.6 * HISTOGRAM * -O.O A B C D E F G H I J Accessories Recording Paper (10 packs) RS-C conversion cable 9 pins for AT connector Etension cable 1m Etension cable m Etension cable m Judgment result output cable Foot switch -O.O16OO ~ O.499O ~ O.8979 ~ 1.17O ~ 1.8O76O ~.649 ~.7199 ~.179 ~.6119 ~ 4.O87 ~ 4.4OO ~ Mode To print D-chart, perform statistical calculations, and generate histogram. * MODE * TIME 1: O8 6.9O -O.77 -O O 1.7O * CANCEL * PART *NEW NO.: LIMIT DATA* TIME 1:8 NAME: * RESULT * N MAX MIN R.O σn 6.99 σn O O.819 -O O D-Chart *CLEAR SUB DATA* * EXIT SUB GR. * *CLEAR ALL DATA* O L6.9O C U O8O O Mode By entering data, it will calculate and draw a R-control chart. SUB GR. NO *CONTROL LIMIT* TIME 14: 7 NO.OF SUB GR. 1 SAMPLE SIZE 9 -UCL -LCL R R-UCL R-LCL O OO.O787 O.1 Operation result 01.1 Power Source LED Item Description Remarks Printing Method Character format Printing Speed Printing line numbers per printing roll Power supply Operating Temperature Storage Temperature Accuracy Clock battery life epectancy Battery life Printouts Processing capability Output function Timer-controlled data input Standard accessories Line thermal 84 dot 6 4 (Large) 4 16 (Normal) 0. sec. per line 600 lines / 1 roll (normal)/ 000 lines / 1 roll (large) AC adapter (6V, 00 ma) 4 Alkali batteries size AA (LR6) or 4 size AA Ni-MH batteries 0 ~ 4 (AC Adapter) 10 ~ 4 (batteries) 10 ~ 0 min. ma / month Appro. 10 years lines 1600 mah Ni-MH Printing every sec (D W H) 90 g Measurements, GO/NG judgment results Measurements, GO/NG judgment results, Number of measurements, MAX., MIN., Range, Standard deviation ( -n, n-1), Number of defects, Percentage of defects, Process capability inde (Cp, Cpk), Histogram Same as above plus D-Chart Function of calculating the center value between the control limits required for generating various control charts = (Sample size Number of sub-groups = total number of measurements) sets of limit data Measured data (RS-C, TTL level) GO/NG Judgment results (+NG, GO, NG) 0. sec, 1 sec, sec, 0 sec, 1 min, 0 min, 60 min. AC Adapter Recording paper: 1 pc. (8 (W) 48 m (L)) Strap Quick Reference Operation manual When using AC adapter Dual power supply *AC adapter input voltage within a range of 100VAC % In a package as specified by TECLOCK Average life epectancy Average life epectancy but varies with usage Without accessories Mode 1 Mode Mode Both Mode 1 and Mode 100V~40V ZE-17 (JAPAN, USA, KOREA) 100V~40V ZE-18 (GERMANY) 100V~40V ZE-19 (U.K. and Other) When ordering Part No. ZE-04 (10 packs.) ZY-111 Q-06 Q-0

4 Digital Comparator These are eclusive equipments which comparatively measure dimension of internal diameter and outer diameter. After placing master gauge on measuring table and setting up standard value (zero point set up), tolerance judging measurement against standard value is possible by measuring work piece. Cemented carbide is provided to stylus and anvil (anvil pin). Special made products are complied for the measuring range ecept for below. FM-J 9 0 Digital Inside Comparator FM-J 4~ 10 1.Carbide Pole Ma. Min. 4 1.Carbide Pole FM-60J 9 Digital Outside Comparator FM-60J 10~ Ma. 60 Min Eample Gauge Accuracy* Measuring Force (N) FM or less FM or less *The quantizing error is not included.

5 Sensor Gauge Digital Type Springs and pressed parts which are used for precision equipments, computer terminal and home electric goods can be measured just before their shapes are changed due to measuring force. If detecting contact between sensor (contact point) and work piece by energizing, it simultaneously sounds (buzzer) when LED lamp is lighting.. Then read the value which is detected. Micro-motion is adjusted by with upper knob. Work piece of maimum 10 can be measured by using block gauge. As detection is implemented by energizing, work piece which is not energized can not be measured. Coarse Knob Adjusting Knob Measuring height of coil spring SD-46A LED Lamp SD-46A Digital Ma. 10 Gauge Error ( m) 1 Specimen Table Size Power Supply (kg) W80 D80 DCV (AA size battery ) *.4 *1 The quantizing error is not included. * SR-44 battery for digital indicator Sensor Gauge Dial Type Micro-motion is adjusted by 10 with upper knob. SD-101A Graduation 10 LED Lamp SD-101A Dial (Analog) Ma. 10 Gauge Error ( m) 1 Specimen Table Size W80 D80 Power Supply DCV (AA size battery ) (kg).4 Specification of minimum display 0.01 digital type, that of dial type of its graduation and type without stand can be produced with treatment of special order. Please contact our branch nearby for detail. 4