Radiant Heating & Cooling Panels

Transcription

1 DISTRIBUTED BY Radiant Heating & Cooling Panels Glas Mullins Mill Kells, Co. Kilkenny Ireland Tel: +353 (0) or freephone 1800 ENERGY (363749)

2 Always a step ahead FRENGER SYSTEMEN BV is one of Europe s leading ceiling panel manufacturers. As founder member of EMCP (European manufacturer of eiling panles) FRENGER SYSTEMEN BV panel systems have been accredited and tested in accordance with the new European Stanndard to ensure confomity and compatibility. All ceiling panel offer increased efficiancy and high outputs. Panel Systems: 1. HB- 200 Super - Traditional linear flat panel concept 2. SMARTLINE - Modern linear flat panel concept 3. ECO EVO - Economic panel concept for sportshalls and industrial bulding 4. ECO EVO PLUS - Increased radiant output for innovative and economic heating Criteria: 3 Lightweight construction 3 Join on-site with pressfittings 3 Integrated light fittings available 3 Plain or perforated infill panels 3 Panels can be supported at stretcher tubes allowing more freedom of suspension 3 Flat surface with concealed tubes or angular profiles 3 Additional energy saving due to increased radiant output Room after 10 mins 3 Eco Evo & Eco Evo Plus are pre-assembled saving fitting time 3 Continuous length up to 70M 3 Can be used with LTHW, MTHW & LP steam as heating medium Ceiling Room after 20 mins Energy Saving Height M Radiant Heating Convective Heating Floor o C Comparable Energy Graph Up to 46% Energy Savings Room after 40 mins 2

3 Always a step ahead Economic - Saves energy A main advantage of our ceiling systems is the saving of energy. This is based on the concept of radiant heating: it is possible to lower the air temperature up to 3K without any loss of comfort. This saves energy. By quick calculation there is a saving of 6% per 1K of lower air temperature. Prevents pollution A principle advantage of the systems energy saving capability is the lowering of environmental pollution Certified Heat output The heat output shown in the brochure have been measured in accordance with the new European Standard EN by the celebrated testing laboratory at University of Stuttgart. OPTIONS Typical control system with black bulb SENSORS Saving Room Space The heating or cooling system is installed in situations, where free space is available - at the ceiling. You can use the whole area for other services. Walls can be used for the integration of other furniture etc. Similar temperature profile The floor to ceiling temperature is almost constant, resulting in a comfortable environment. Flexible stainless steel connections Higher wall and floor temperatures Radiation emitted by the ceiling reaches the walls, floor, furniture and people in the room. The walls and the floors are large places, which absorbs radiation and gets warmer. Many ailments are caused by cold walls or floors. No Noise Our ceiling systems are designed in a way that there are no moving parts and no noise is produced. Hygienic Integrated light fittings Because of minimum air movement, there is very low air circulation and hence movement of dust. This is an important for asthmatics. Integration of light fittings It is possible to integrate many different types of lights and diffusers into the ceiling. Low maintenance and running costs The ceiling system has low service costs, because there are no working parts. Only the boiler, the circulating pump etc. have to be maintained normally Ball resistance All products have been tested in accordance with DIN Part 3 for ball impact resistance. Frenger Panel with ball deflectors 3

4 HB S / SMARTLINE Traditional Radiant Panel Having a flat surface Insulation Square Tube Clips Stiffener Side Panel Endbox Mid Panel Grips Frenger Panel with ball deflectors Grids: HB-200-S 28mm steel tubes according to DIN 2394 and internal standard, wall thickness 1.5mm (2.50mm wall thickness MTHW + Steam) SMARTLINE 21.3mm Steel tubes HB-200-S Distance between tubes 200 mm SMARTLINE distance between tubes 80 to 150mm HB-200-S Width in 200 mm increments from 400 to mm length from to mm Panel depth of 70mm SMARTLINE width from 400 to 1000mm Endboxes to cover headers and connection positions Grid stiffeners fitted which can also be used as fixing positions Insulation: Mineral wool, encapsulated in LDPE bags, 30 mm thick, Density 25kg/m3, =0.04 W/mK, installed from above, fire resistance in accordance with EN 13501: B1 Flat surface with concealed tubes HB-200-S Aluminium infill panels, thickness 0.7 mm fitted by spring clips (4 No. per m and length of panel) SMARTLINE steel panel fitted by magnets Perforated centre and side panels available Standard colour similar to RAL 9010 matt, painting according to DINPLUS-certification: Level 4 (suitable for heating & cooling, also in wet rooms) Integration of light fittings - (LTHW only) possible Emission coefficient: 0.95 Low operating weight: Use of pressfittings for joining HB-200-S only HB-200-S SMARTLINE Width (mm) Weight inc. water (kg/m) Weight inc. water (kg/m) n/a n/a 4

5 Installation Examples HB-200 S in showroom SMARTLINE in Bank office 5

6 ECO EVO / ECO EVO Plus Insulation Square Tube Insulation Square Tube Clips Stiffener Stiffener Clips Side Panel Side Panel Endbox Endbox Mid Panel Grips Mid Panel Grips ECO EVO ECO EVO Plus Radiant output up to 81% - additional energy saving of 15% Grids: 28mm steel tubes according to DIN 2394 and internal standard, wall thickness 1.5mm (2.50mm wall thickness MTHW + Steam) Ball resistance tested according to DIN Part 3 Operating pressure (standard) 6 bars: special versions up to 20 bars possible, pressure level according DINPLUS-Certification: Level 2 Maximum operating temperature: 120 o C application up to 4 bars available Distance between tubes: 150mm Width in 150mm increments from 310 to 1.510mm Length from to mm Depth: 70mm Endboxes to cover headers and connection positions Use of pressfittings for joining Grid stiffeners fitted which can also be used as fixing positions Insulation: Mineral wool, encapsulated in LDPE bags, 30 mm thick, Density 25kg/m 3, =0.04 W/mK, installed from above, fire resistance in accordance with EN 13501: B1 Profiled surface with part exposed tubes to increase radiant effect. Tubes can be painted contrasting or similar colour to infill panels Aluminium infill panels, thickness 0.7 mm fitted by spring clips (1 No. per m each length of panel) Perforated centre panels also available Standard colour similar to RAL 9010 matt, painting according to DINPLUS-certification: Level 4 (suitable for heating & cooling, also in wet rooms) Integration of light fittings - lit strip - (LTHW only) possible Emission coefficient: 0.95 Low operating weight: ECO EVO ECO EVO Plus Width (mm) Weight inc. water (kg/m) Weight inc. water (kg/m) ECO EVO Plus - additional energy savings of up to 15% Radiant output up to 81% 6

7 ECO EVO Plus Shedhöhe 1 m Montagehöhe Platten 6 m Temperatur [K] ECO EVO Lufttemperatur Plus in warehouse in einem hohen area Raum bei Einsatz einer konventionellen Deckenstrahlplat Standard ceiling panels ECO EVO Plus Shedhöhe 1 m 1m Low air temperature Montagehöhe Platten 6m 6 High m Temperatur Temperature [K] Temperatur Temperature [K] ECO EVO Plus - additional energy savings of up to 15% in einem hohen Raum bei Einsatz einer konventionellen Deckenstrahlplatte Niedrige Lufttemperatur in einem hohen Raum bei Einsatz einer gebogenen Deckenstrahlp The unique construction of this product incorporating downstand edges has the benefit of reducing local convection at high level and greatly increasing the radiant effect at the workplace. This is particularly important in high bay areas and can result in up to 15% energy and operating cost savings 7

8 Installation Examples 8

9 Technical Details FRENGER ECO EVO, ECO EVO PLUS and SMARTLINE will be delivered to site in pre-assembled form. The panels need simply joining on site, testing and addition of insulation. HB-200-Super will be delivered in components, allowing very easy installation of grids. Testing and fitting of infill panels and insulation are a second fixing operation Variation: Single Panel Fixing and Connection details Connection to further panel Opposite end connections Roof Profile Same end connections with 2 flow and 1 return (longer panels) Ring with ø and nut M6 Dexton or similar Layout for seperate longer panels 4mm ø Galvanised Rod 4mm ø Galvanised Rod Quick release hanger Seperate panel opposite end connections Nut & Bolt M5 Clip Pipe Nut & Bolt M5 Clip Pipe Connections: Sockets 3 /4 bsp Position: Vertical on top of header or Horizontal Pressure drops Pa/m Coach bolt fixing Timber Joist Soffitte PD Stretcher Tubes Quick release hanger Galv hanger 4mm Quick release hanger Galv hanger 4mm PD Panel PD Header PD Header (Pairs) Nut & Bolt M5 Nut & Bolt M5 Clip Clip Pipe Pipe Flow rate Maximum distance between fixing points: 3.0 m - Recommended distance: 1.6 m No. of fixing positions in panel width: Panel width up to 1,000 mm 2 No. From mm: to 1,600 3 No From mm upwards 4 No. Fixing points are tested at the factory during the manufacturing process 9

10 Technical Information ECO EVO Width (mm) No of tubes output (K) W/m.Lin Output of Heaters ECO EVO PLUS Output of Heaters Increased radiant output --- additional energy savings. 10

11 Technical Information HB S / SMARTLINE Width (mm) output (K) W/m.Lin No of tubes SMARTLINE AVAILABLE UP TO 1000mm WIDE HB 200-S / SMARTLINE Width Baubreite No. Anzahl of tubes Rohre Weight Leergewicht using (kg/m) water Weight Wasserinhalt of water (kg/m) Exponent Constant Konstante ECO Deckenstrahlplatten EVO & ECO EVO ECO PLUS EVO und ECO EVO PLUS Width Baubreite (mm) No. Anzahl of tubes Rohre Weight Leergewicht using (kg/m) water Hi-Rad ECO EVO Weight Leergewicht using (kg/m) water Hi-Rad ECO EVO PlusPLUS Weight Wasserinhalt of water (kg/m) Exponent Hi-Rad ECO EVO Constant Konstante Hi-Rad ECO EVO Exponent Hi-Rad ECO EVO PlusPLUS Constant Konstante Hi-Rad ECO EVO PlusPLUS Pressure Druckverlust drop / Massenstrom (for all styles) (gültig für alle Deckenstrahlplatten) No. Anzahl of tubes Rohre Same Anschluss end connection einseitig m=m m=m/1,5 m=m/2 m=m/2,5 m=m/2 m=m/3 m=m/4 Opposite Anschluss end wechselseitig connections m=m/2 m=m m=m/1,5 m=m/1 m=m/3 m=m/2,5 m=m/3 11

12 FRENGER SYSTEMEN BV product range Heated ceilings Chilled ceilings Chilled beams Allumination fittings for heated and chilled ceilings DISTRIBUTED BY Glas Mullins Mill Kells, Co. Kilkenny Ireland Tel: +353 (0) or freephone 1800 ENERGY (363749) FRENGER SYSTEMEN BV Heiz- und Kühltechnik GmbH Gartenstrasse D Gross-Umstadt Phone / Fax / Mail: info@frenger.de FRENGER SYSTEM GmbH Mülacher 10 CH-6024 Hildisrieden Phone Fax / Mail: info@frenger.ch FRENGER SYSTEMEN BV Generatorstraat 12 NL-3903 LJ Veenendaal Phone Fax