Standard Junction Details (Full Fill) INDEX AHR SJB. Feb 2013 N.T.S. A 11/2014 HH-FF-22 & HH-FF-23 ADDED SJB
|
|
- Kellie Beverly Hubbard
- 7 years ago
- Views:
Transcription
1 Detail Ref. HH-FF-01 HH-FF-02 HH-FF-03 HH-FF-04 HH-FF-05 HH-FF-22 HH-FF-06 HH-FF-07 HH-FF-08 HH-FF-09 HH-FF-10 HH-FF-11 HH-FF-12 HH-FF-13 HH-FF-23 HH-FF-14 HH-FF-15 HH-FF-16 HH-PW-17 HH-PW-18 HH-PW-19 HH-PW-20 HH-PW-21 Detail Title Full-Fill - Suspended Beam nd Block Flo, Insulation bove Slab Full-Fill - Suspended In-Situ Concrete Flo, Insulation Below Slab Full-Fill - Concrete Ground Bearing Flo, Insulation Below Slab Full-Fill - Independent Lintel Full-Fill - Steel Lintel, Perfated Base Plate, (Insulated Soffit) Full-Fill - Steel Lintel, Open Back (no continuous base plate) Full-Fill - Sill Full-Fill - Jamb Full-Fill - Intermediate Timber Flo Within Dwelling Full-Fill - Precast Concrete Separating Flo Between Dwellings Full-Fill - Pitched Roof, Gable, Insulation t Ceiling Level, Ventilated Loft Full-Fill - Pitched Roof, Gable, Insulation t Rafter Level, Unventilated Rafter Void Full-Fill - Pitched Roof, Eaves, Insulation t Ceiling Level, Ventilated Loft Full-Fill - Pitched Roof, Eaves, Insulation t Rafter Level, Unventilated Rafter Void Full-Fill - Pitched Roof, Eaves - Insulation t Rafter Level, Unventilated Rafter Void Full-Fill - Nmal Cner Full-Fill - Inverted Cner Full-Fill - Party Wall Between Dwellings Party Wall Masonry, Full Fill - Suspended Beam nd Block Flo, Insulation bove Slab Party Wall Masonry, Full Fill - Suspended Concrete Flo, Insulation Below Slab Party Wall Masonry, Full Fill - In-Situ Concrete Ground Bearing Flo, Insulation Below Slab Party Wall Masonry, Full Fill - Roof, Insulation t Ceiling Level, Ventilated Loft Party Wall Masonry, Full Fill - Roof, Insulation t Rafter Level, Unventilated Rafter Void 11/2014 HH-FF-22 & HH-FF-23 DDED Standard Junction Details (Full Fill) INDEX N.T.S. NO.
2 full fill cavity Celcon blocks to inner leaf, above and below dpc perimeter insulation to provide minimum resistance of 0.8m²K/W base course incpating dpm and dpc wall cavity insulation to continue at least 215mm from top of beam dpc dpm max. 75mm screed thickness flo insulation to tightly abut wall blockwk precast beam and block flo with Celcon Standard infill blocks ventilated void Celcon infill blocks built into walls to have the same compressive strength as wall blocks B 11/2014 LBC REFERENCE DDED MX. SCREED THICKNESS NOTE 11/2013 DDED Celcon foundation blocks see Constructive Details CD0022 Details E5MCFF Full Fill - Suspended Beam nd Block Flo, Insulation bove Slab HH-FF-01 NO. B
3 full fill cavity Celcon blocks to inner leaf, above and below dpc base course incpating lapped dpm and dpc wall cavity insulation to continue at least 215mm below underside of slab dpc dpm flo insulation to tightly abut wall blockwk MX. FLOOR THICKNESS NOTE B 11/2014 REMOVED. LBC REFERENCE DDED. MX. FLOOR THICKNESS NOTE 11/2013 DDED Celcon foundation blocks see Constructive Details CD0023 Details E5MCFF Full Fill - Suspended In-Situ Concrete Flo, Insulation Below Slab HH-FF-02 NO. B
4 full fill cavity Celcon blocks to inner leaf, above and below dpc to continue at least 215mm below underside of slab dpc base course incpating lapped dpm and dpc perimeter insulation to provide minimum resistance of 0.8m²K/W dpm flo insulation to tightly abut wall blockwk MX. FLOOR THICKNESS NOTE B 11/2014 REMOVED. LBC REFERENCE DDED. MX. FLOOR THICKNESS NOTE 11/2013 DDED Celcon foundation blocks see Constructive Details CD0024 Details E5MCFF Full Fill - Concrete Ground Bearing Flo, Insulation Below Slab HH-FF-03 NO. B
5 Celcon blocks to inner leaf full fill cavity minimum frame overlap 30mm external lintel internal lintel PVC-U cavity closer fully insulated 11/2014 LBC NOTE DDED see Constructive Details CD0025 Details E2MCFF4-6. Full Fill - Independent Lintel HH-FF-04 NO.
6 Celcon blocks to inner leaf full fill cavity minimum frame overlap 30mm insulated steel lintel with perfated base plate (equivalent conductivity 30W/mK less) soffit insulation with min. resistance of 0.6m²K/W MX. LINTEL HEIGHT NOTE 11/2014 REMOVED. LINTEL BSEPLTE DDED. LBC REFERENCE DDED see Constructive Details CD0026 Details E1MCFF4-6. Full Fill - Steel Lintel, Perfated Base Plate, (Insulated Soffit) HH-FF-05 NO.
7 ircrete blocks to inner leaf full fill cavity minimum frame overlap 30mm insulated steel lintel no continuous base plate, max steel thickness 3.0mm see Details E2MCFF7-9. Full Fill - Steel Lintel, Open Back, (no continuous base plate) HH-FF-22 Nov 2014 NO. 0
8 minimum frame overlap 30mm PVC-U cavity closer, fully insulated Celcon blocks to inner leaf full fill cavity 11/2014 LBC NOTE DDED see Constructive Details CD0027 Details E3MCFF4-6. Full Fill - Sill HH-FF-06 NO.
9 full fill cavity 300mm max. Celcon blocks to inner leaf PVC-U cavity closer, fully insulated minimum frame overlap 30mm 11/2014 LBC NOTE DDED see Constructive Details CD0028 Details E4MCFF4-6. Full Fill - Jamb HH-FF-07 NO.
10 Celcon blocks to inner leaf full fill cavity timber flo joists may be built into inner block leaf suppted on joist hangers 11/2014 LBC NOTE DDED see Constructive Details CD0029 Details E6MCFF4-6. Full Fill - Intermediate Timber Flo Within Dwelling HH-FF-08 NO.
11 full fill cavity Celcon blocks to inner leaf concrete screed resilient layer to Robust Details specification proprietary fire stop precast concrete plank flo ceiling void PROPRIETRY FIRE STOP NOTE 11/2014 REVISED. LBC NOTE DDED. see Constructive Details CD0030 Details E7MCFF4-6. Full Fill - Precast Concrete Separating Flo Between Dwellings HH-FF-09 NO.
12 Celcon blocks to inner leaf minimum 200mm above ceiling insulation pack compressible insulation between last truss and wall full fill cavity ceiling insulation 11/2014 LBC NOTE DDED see Constructive Details CD0031 Details E12MCFF4-6. Full Fill - Pitched Roof, Gable - Insulation t Ceiling Level, Ventilated Loft HH-FF-10 NO.
13 fill this void with insulation having a max. λ of 0.040W/mK breathable roof membrane 100mm minimum proprietary fire stop if required full fill cavity min. 150mm rafters void fully filled with insulation insulation under rafters (optional) pack compressible insulation between last rafter and wall Celcon blocks to inner leaf B 11/2014 PROPRIETRY FIRE STOP NOTE REVISED. LBC NOTE DDED. RFTERS INSULTION THICKNESS 11/2013 NOTE DDED see Constructive Details CD0032 Details E13MCFF4-6. Full Fill - Pitched Roof, Gable - Insulation t Rafter Level, Unventilated Rafter Void HH-FF-11 NO. B
14 min. 50mm insulation between wall plate and vent proprietary ventilat between rafters insulation to entirely fill eaves gap between wall insulation and ceiling insulation ventilated loft ceiling insulation between and over roof trusses Celcon blocks to inner leaf proprietary fire stop if required PROPRIETRY FIRE STOP NOTE B 11/2014 REVISED. LBC NOTE DDED. WLL PLTE INSULTION COVER 11/2013 NOTE MOVED full fill cavity see Constructive Details CD0033 Details E10MCFF4-6. Full Fill - Pitched Roof, Eaves - Insulation t Ceiling Level, Ventilated Loft HH-FF-12 NO. B
15 breathable roof membrane insulation to entirely fill eaves gap between and ceiling insulation 150mm min. rafters with insulation of max. λ = 0.040W/mk between, to sloping ceiling section insulation under rafters (optional) Celcon blocks to inner leaf proprietary fire stop if required full fill cavity PROPRIETRY FIRE STOP NOTE B 11/2014 REVISED. RFTERS INSULTION NOW 11/2013 SHOWN S 150mm. see Constructive Details CD0034. Full Fill - Pitched Roof, Eaves - Insulation t Rafter Level, Unventilated Rafter Void HH-FF-13 NO. B
16 breathable roof membrane insulation to entirely fill eaves gap between and ceiling insulation 150mm rafters with insulation of λ = 0.044W/mK between, to sloping ceiling section 50mm insulation under rafters, max λ = 0.022W/mK ircrete blocks to inner leaf full fill cavity see Details E11MCFF4-6. Full Fill - Pitched Roof, Eaves - Insulation t Rafter Level, Unventilated Rafter Void HH-FF-23 Nov 2014 NO. 0
17 full fill cavity Celcon blocks to inner leaf 11/2014 LBC NOTE DDED see Constructive Details CD0035 Details E16MCFF4-6. Full Fill - Nmal Cner HH-FF-14 NO.
18 Celcon blocks to inner leaf full fill cavity 11/2014 LBC NOTE DDED see Constructive Details CD0036 Details E17MCFF4-6. Full Fill - Inverted Cner HH-FF-15 NO.
19 cavity width min. 75mm up to 100mm max. (subject tp Robust Detail requirements) 2 x 100mm leaves to separating walls above dpc: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm³) Celcon Super Strength (8.7N/mm²) 8mm parge coat may be omitted (subject to Robust Detail requirements) Celcon blocks to inner leaf full fill mineral wool cavity wall insulation, density up to 40kg/m³ PROPRIETRY FIRE STOP NOTE 11/2014 REVISED. LBC NOTE DDED. proprietary insulated fire stop if required full fill cavity see Constructive Details CD0037 Details E18MCFF7-10. Full Fill - Party Wall Between Dwellings HH-FF-16 NO.
20 dpm cavity width min. 75mm up to 100mm max. (subject to Robust Detail requirements) 8mm parge coat may be omitted (subject to Robust Detail requirements) insulation to continue at least 215mm below top of beams minimum 225mm ventilated void dpm 2 x 100mm leaves to separating wall above and below dpc: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm²) Celcon Super Strength (8.7N/mm²) full fill mineral wool cavity wall insulation, density up to 40kg/m³ perimeter insulation to provide minimum resistance of 0.8m²K/W max. 75mm screed thickness flo insulation to tightly abut wall blockwk precast beam and block flo with Celcon Standard infill blocks Celcon infill block built into walls to have the same compressive strength as wall blocks Celcon foundation blocks B 11/2014 LBC NOTE DDED. MX. SCREED THICKNESS NOTE 11/2013 DDED see Constructive Details CD0017 Details P1PCFF1-2. Party Wall Masonry, Full Fill - Suspended Beam nd Block Flo, Insulation bove Slab Nov 2012 HH-PW-17 NO. B
21 cavity width min. 75mm up to 100mm max. (subject to Robust Detail requirements) 8mm parge coat may be omitted (subject to Robust Detail requirements) full fill mineral wool cavity wall insulation, density up to 40kg/m³ 2 x 100mm leaves to separating wall above and below dpc: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm²) Celcon Super Strength (8.7N/mm²) base course incpating lapped dpm and dpc dpm dpm flo insulation to tightly abut wall blockwk insulation to continue at least 215mm below underside of slab MX. FLOOR THICKNESS NOTE B 11/2014 REMOVED. LBC REFERENCE DDED. MX. SCREED THICKNESS NOTE 11/2013 DDED Celcon foundation blocks see Constructive Details CD0018 Details P1PCFF3-4. Party Wall Masonry, Full Fill - Suspended Concrete Flo, Insulation Below Slab Nov 2012 HH-PW-18 NO. B
22 cavity width min. 75mm up to 100mm max. (subject to Robust Detail requirements) 8mm parge coat may be omitted (subject to Robust Detail requirements) 2 x 100mm leaves to separating wall above and below dpc: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm²) Celcon Super Strength (8.7N/mm²) full fill mineral wool cavity wall insulation, density up to 40kg/m³ to continue at least 215mm below underside of slab base course incpating lapped dpm and dpc perimeter insulation to provide minimum resistance of 0.8m²K/W dpm dpm flo insulation to tightly abut wall blockwk MX. FLOOR THICKNESS NOTE B 11/2014 REMOVED. LBC REFERENCE DDED. MX. FLOOR THICKNESS NOTE 11/2013 DDED Celcon foundation blocks see Constructive Details CD0019 Details P1PCFF5-6. Party Wall Masonry, Full Fill - In-situ Concrete Ground Bearing Flo, Insulation Below Slab Nov 2012 HH-PW-19 NO. B
23 cavity width min. 75mm up to 100mm max. (subject to Robust Detail requirements) 2 x 100mm leaves to separating wall above dpc: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm²) Celcon Super Strength (8.7N/mm²) pack compressible insulation between last rafter and wall minimum 200mm above ceiling insulation ceiling insulation 8mm parge coat may be omitted (subject to Robust Detail requirements) full fill mineral wool cavity, density up to 40kg/m³ 11/2014 LBC NOTE DDED see Constructive Details CD0020 Details P4PCFF1-2. Party Wall Masonry, Full Fill - Roof, Insulated t Ceiling Level, Ventilated Loft Nov 2012 HH-PW-20 NO.
24 minimum 100mm insulation breathable roof membrane full fill mineral wool cavity wall insulation, density up to 40kg/m³ min. 150mm rafters void fully filled with insulation 2 x 100mm leaves to separating wall: Celcon Standard (3.6N/mm²) Celcon High Strength (7.3N/mm²) Celcon Super Strength (8.7N/mm²) cavity width min. 75mm up to 100mm max. (subject to Robust Detail requirements) insulation under rafters (optional) pack compressible insulation between last rafter and wall B 11/2014 LBC NOTE DDED RFTERS INSULTION THICKNESS 11/2013 NOTE DDED see Constructive Details CD0021 Details P5PCFF1-2. Party Wall Masonry, Full Fill - Roof, Insulated t Rafter Level, Unventilated Rafter Void Nov 2012 HH-PW-21 NO. B
Contents. APA Construction Details. Full fill cavity walls 2-13. Partial fill cavity walls 14-25. Solid externally insulated walls 26-37
Contents Pages Full fill cavity walls 2-13 Partial fill cavity walls 14-25 Solid externally insulated walls 26-37 Appendix (BRE confirmation of Ψ and y-values) 38-40 Page 1 of 40 APA Construction Details
More informationIntroduction & Principles Issued in support of Junction Details, Parts 1 to 5
Accredited Construction Details (Scotland) 2010 For the limitation of thermal bridging and air infiltration in low and medium rise domestic buildings Introduction & Principles Issued in support of Junction
More informationRockwool Flexi Insulation Application Guide
Pitched roof Rafters InterMediate floors INTERNAL partitions external Framed walls separating floors Separating Walls Rockwool Flexi Insulation Application Guide Ground floor The perfect fit for any framed
More informationMulti-layer Insulation Blanket for Roofs
Multilayer Insulation Blanket for Roofs Thermal Insulation in a 40mm thin, flexible, multilayer membrane Meets requirements of L1A, L1B 2010 In accordance with BR443 NHBC Acceptance Pitched & Flat roof
More informationIRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN. 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION
IRISH BUILDING CONTROL INSTITUTE HOTEL COURT HOTEL BALLYCONNELL CO CAVAN 26 th MARCH 2009 TIMBER FRAME CONSTRUCTION Bill Robinson BSc. C. Eng. M. I. Struct. E. Timber Design Services 1 IS440 Timber frame
More informationModule 3.7. Thermal bridging
Module 3.7 Thermal bridging Learning Outcomes On successful completion of this module learners will be able to - Describe construction details which influence thermal bridging. 2 Introduction to thermal
More informationSection 3.1.2. Timber Frame Walls. Single layer between studs. Single layer between studs with service void. Between studs with insulated lining
Section Timber Frame Walls Single layer between studs Product: Earthwool FrameTherm Rolls and Slabs Tf01 Single layer between studs with service void Product: Earthwool FrameTherm Rolls and Slabs Tf02
More informationFire 2This Technical Bulletin has been commissioned by the UK SIP Association in
REV 1-12.12.11/TB002 Technical Bulletin Fire 2This Technical Bulletin has been commissioned by the UK SIP Association in conjunction with TRADA Technology and is intended to provide the reader with introductory
More informationRochdale Building Control Guide. Approved Document C. Site preparation and resistance to contaminants and moisture
Rochdale Building Control Guide Approved Document C Site preparation and resistance to contaminants and moisture Dampness is often misdiagnosed within buildings, the approved document deals with prevention
More informationRev 1-12.2013. Code of Practice. SIP Technology. www.uksips.org
Rev 1-12.2013 Code of Practice SIP Technology www.uksips.org What are Structural Insulated Panels (SIPS)? SIPS are prefabricated, high performance, lightweight, building panels that can be used in floors,
More informationGood Craftsmanship Guide. Carpentry and Joinery- Carcassing
Good Craftsmanship Guide Carpentry and Joinery- Carcassing Introduction This Good Craftsmanship Guide highlights key problems with the major elements of Carpentry and Joinery - Carcassing, and gives guidance
More informationThe Pocket Guide To Insulation August 2013
The Pocket Guide To Insulation August 2013 Introduction Knauf Insulation is the UK s leading manufacturer of insulation products, including: Earthwool glass and rock mineral wool Polyfoam ECO extruded
More informationSection 4.3. Separating Floors. Timber frame floor with I-Beams. Upgrading existing timber floor with new ceiling. Timber frame floor with
Section Separating Floors Timber frame floor with I-Beams Product: Earthwool Acoustic Roll and Floorfoam Easy Edge Strip Timber frame floor with solid timber joists Product: Earthwool Acoustic Roll and
More informationAdditions and Alterations
Additions and Alterations Addition and alteration construction is a miscellaneous grouping of home improvement and renovation projects that are generally geared toward the enhancement of an existing principal
More informationDomestic Extensions. Monmouthshire County Council. Building control guidance document
Monmouthshire County Council Building control guidance document Domestic Extensions Building Regulations 2010 (with 2013 amendments) For use in Wales May 2013 Edition Guidance produced for Monmouthshire
More informationfire separating walls #2
210108 fire separating walls #2 ISSUE BSA has identified a number of instances of defective fire separating walls in duplexes, town houses and multi-residential complexes. The system of fire separating
More information!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
More informationThe Kingspan Insulation Price List 1 st January 2013
Insulation The Kingspan Insulation Price List 1 st January 2013 FOR BUILDING FABRIC INSULATION, CAVITY CLOSERS AND MEMBRANES Visit our website: www.kingspaninsulation.co.uk Low Energy - Low Carbon Buildings
More informationConventions for U-value calculations
Conventions for U-value calculations 2006 edition Brian Anderson BRE Scotland BRE is committed to providing impartial and authoritative information on all aspects of the built environment for clients,
More informationThe Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES 2 ND EDITION
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES 2 ND EDITION CONTENTS Page 1 STATUS OF THIS DOCUMENT 3 2 WHEN YOU CAN USE THIS DOCUMENT 4 3 INTRODUCTION 5 4 SUBSOIL CONDITIONS 6 5 FOUNDATIONS
More informationHouse building is changing fast NHBC unveils new Standards Chapters on curtain walling and cladding, and light steel framed walls and floors
W42_Stand_Extra_32 15/3/05 9:17 am Page 2 NHBC s technical newsletter April 2005 Issue 32 This edition includes: 2 House building is changing fast NHBC unveils new Standards Chapters on curtain walling
More informationBuilding Regulations for the Conservation of Fuel and Power
Insulation CI/SfB Rn7 M2 First Issue April 2014 Building Regulations for the Conservation of Fuel and Power ENGLAND EXISTING DWELLINGS 2013 EDITION Low Energy Low Carbon Buildings Contents Page Introduction
More informationBuilding Control Guidance Note
Issued 01/01/13 Rev Page 1 of 5 If you intend to convert an existing loft space into additional rooms you will need to apply for Building Regulation Approval. You may also need Planning Permission if you
More informationThe Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES
The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES The Scottish Building Standards TECHNICAL HANDBOOK CONSERVATORIES Crown copyright 2006 Cover designed and produced by Astron Text pages
More informationInstallation Details. D1 General D2 Walls D3 Ceilings D4 Reference. D Installation Details
D Installation Details D1 General D2 Walls D3 Ceilings D4 Reference D Installation Details D Contents D1 General Installation and Fastening Sequence for Steel Studs D1.1 Fastener Selection D1.3 D2 Walls
More informationSTRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM
Chapter 9 STRUCTURAL CONCEPT FOR LIGHT GAUGE STEEL FRAME SYSTEM 9.1 BACKGROUND Steel is widely used in the construction of multi-storey buildings. However, steel construction is seldom used and is traditionally
More informationEnergy Company Obligation (ECO): Technical Monitoring Questions
Energy Company Obligation (ECO) Technical Monitoring Questions v1 30/05/2013 Energy Company Obligation (ECO): Technical Monitoring Questions Under ECO suppliers are required to instruct suitably qualified
More information0331 Brick and block construction
0331 BRICK AND BLOCK CONSTRUCTION This worksection has been written for Class 1 and 10a buildings that fully conform to the scope of AS 4773.1. If the works include isolated structures, (totally separate
More informationIncluding. Rubershield-Pro. Breather Membrane
Including RubershieldPro Breather Membrane 2 Ruberoid produces a wide range of underslating membranes, primarily to be installed below tiles, slates or metal roofing providing a secondary barrier against
More information201 WATER STREET FORWARDERS MUSEUM AND VISITORS INFORMATION CENTRE
STRUCTURAL INSPECTION REPORT DRAFT 201 WATER STREET FORWARDERS MUSEUM AND VISITORS INFORMATION CENTRE TOWN OF PRESCOTT Date: November 2013 GENIVAR No.: 131-20617-00 2611 Queensview Drive, Suite 300, Ottawa,
More informationSection 5.0. Basements. Wall insulated externally. Wall insulated internally. Ba02. Product: Polyfoam ECO Floorboard Ba01.
Section 5.0 Basements Wall insulated externally Product: Polyfoam ECO Ba01 Wall insulated internally Product: Polyfoam ECO Ba02 Basements Basements Basement design Waterproofing BS 8102: 2009 Code of practice
More informationSuperform Products Ltd.
TYPICAL CORNER REINFORCING NOTE : SEE ENGINEERED REBAR SCHEDULES SUPPLIED BY THE MANUFACTURER STEEL REINFORCEMENT WALL CORNER 90 Copyright 2012 Sept. 2012 5.1.1 Rebar Spacing 6" 12" Max. Load LB./FT. 2000
More informationInnovation - High performance roof, wall and floor insulation board. delivering better performance
2010 VERSION 1 IRL High performance roof, wall and floor insulation board Innovation - delivering better performance PRODUCT SPECIFICATION INSTALLATION GUIDE I ve worked with Xtratherm for years, they
More informationFire Barrier Systems. For inhibiting the spread of fire and smoke in concealed spaces
CI/SfB Km1 (K22) November 2006 (replaces July 2005 issue) Construction type Cavity Barriers Fire Barrier Systems For inhibiting the spread of fire and smoke in concealed spaces As part of the comprehensive
More informationSECTION 7: C - STRUCTURAL ENGINEERS SPECIFICATIONS
SECTION 7: C - STRUCTURAL ENGINEERS SPECIFICATIONS SITE C SHOPPING CENTRE, KHAYELITSHA PROJECT NO 2369 Project Specification Refer all queries to: John Meiring Tel: +27 21 425 0065 REVISION P01 E-mail:
More informationThis seminar covers the principles, design and installation of ground bearing and suspended insulated floors. You will discover
Dow Construction Products Thermal Insulation of Floors This seminar covers the principles, design and installation of ground bearing and suspended insulated floors. You will discover Why a floor should
More informationNRG 75 CRF NRG GREENBOARD WALL SYSTEM
NRG GREENBOARD WALL SYSTEM NRG Energy Efficient Building Systems is pleased to announce a revolution in lightweight cladding systems. NRG Building Systems is the first and only company to achieve CodeMark
More informationLinea Weatherboard DIRECT FIX CONCRETE SLAB AND SOFFIT FIGURE 1
Top plate Stud Soffit lining 45mm min nog Fix scotia bead Building underlay/james Hardie rigid air barrier Soffit Detail Building underlay/james Hardie rigid air barrier Bottom plate 25mm wide cant strip.
More informationDEFAULT HEAT LOSS COEFFICIENTS
DEFAULT HEAT LOSS COEFFICIENTS SECTION A101 GENERAL REQUIREMENTS A101.1 Scope. The following defaults shall apply to Chapter 4 of both the (RE) and (CE) sections of the IECC. This chapter includes tables
More informationBUILDING CONTROL GUIDANCE SHEET USE OF BREATHABLE ROOFING FELTS.
Building Control Charnwood Borough Council Southfield Road Loughborough LE11 2TN BUILDING CONTROL GUIDANCE SHEET USE OF BREATHABLE ROOFING FELTS. Last updated 16/11/2010 Page 1 of 6 PURPOSE: This Guidance
More informationTGD L 2011. Limiting Thermal Bridging and Air Infiltration. Acceptable Construction Details. Introduction
TGD L 2011 Limiting Thermal Bridging and Air Infiltration Acceptable Construction Details Introduction Government of Ireland 2015 1 INTRODUCTION This guide to Acceptable Construction Details (ACDs) is
More informationFOREST OF DEAN DISTRICT COUNCIL BUILDING CONTROL SERVICES. Building Control Guidance for. Loft Conversions
FOREST OF DEAN DISTRICT COUNCIL BUILDING CONTROL SERVICES Building Control Guidance for Loft Conversions 1ST EDITION - AUGUST 2008 About this document This document intends to provide education and guidance
More informationBritish Gypsum Guide to Timber Frame Construction. March 1998
British Gypsum Guide to Timber Frame Construction March 1998 Timber frame construction has a centuries long tradition in the UK, however, over the last 80 years it has continuously evolved to meet the
More informationdomestic structure SBSG 2007 ANNEX C
domestic structure SBSG 2007 ANNEX C Small buildings structural guidance 1.A General 1.B Stability 1.C Foundations 1.D Masonry walls 1.E Timber frame walls 1.F Timber floor and roof members contents domestic
More informationSTEP-BY-STEP. construction guide. Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet.
STEP-BY-STEP construction guide Delivering better priced Conservatories, Sun Lounges and Garden Rooms via the Internet. Welcome to our CONSERVATORY AND SUNROOM CONSTRUCTION GUIDE What is the specification
More informationCHAPTER 6 CONSTRUCTION TYPES
CHAPTER 6 CONSTRUCTION TYPES SECTION 601 GENERAL 601.1 Scope. Provisions of this chapter shall govern the classification of construction type by materials and fire resistance of its elements and the use
More informationPB301 July 2009. Lightweight Building Solutions. Bushfire Protection. www.boral.com.au/bushfireprotection
PB301 July 2009 Lightweight Building Solutions Bushfire Protection www.boral.com.au/bushfireprotection Attached or adjacent within 6m roofed structures such as garages, carports, verandas and the like,
More informationFoundations and Substructures
Ground workers handbook Foundations and Substructures Introduction The Ground Workers Handbook gives guidance to site managers and site staff on any particular issues on your site for traditional forms
More informationResidential Foundations and Basements
Residential Foundations and Basements Disclaimer All of the following information is based on the 2006 International Residential Code with Kentucky Amendments. As some information is paraphrased, article
More informationImproving the flood resistance of your home. Advice sheet 6: Flood-resilient floors
Improving the flood resistance of your home Advice sheet 6: Flood-resilient This sheet provides guidance on identifying different types of floor, assessing the routes floodwater may enter, and describes
More informationThe better way to build TM. Installation Manual. FOUNDATION SIPs & FROST WALLS SIPs
The better way to build TM Installation Manual FOUNDATION SIPs & FROST WALLS SIPs February 2016 PWF FOUNDATION & FROST WALL SIPs Installation Manual Table of Contents Topics General Requirements...................................
More informationBuilding Construction. Structural Systems 1. Load-bearing wall construction 2. Skeleton framing 3. Combination of the two
Structural Systems 1. Load-bearing wall construction 2. Skeleton framing 3. Combination of the two Factors governing type selection Economics not necessarily the one that requires the least structural
More informationCI/SfB (31.9) BETTER BY DESIGN PRODUCT GUIDE COMPLETE GUIDE TO THE IG PRODUCT RANGE. www.iglintels.com
CI/SfB (31.9) Hh2 BETTER BY DESIGN PRODUCT GUIDE COMPLETE GUIDE TO THE IG PRODUCT RANGE www.iglintels.com BETTER BY DESIGN IG produce the UK s largest range of steel lintels backed by industry leading
More informationONLINE VERSION. The Building Regulations 2010 The Building (Approved Inspectors etc) Regulations 2010 ONLINE VERSION
The Building Regulations 2010 The Building (Approved Inspectors etc) Regulations 2010 E1 E2 E3 E4 E Protection against sound from other parts of the building and adjoining buildings Protection against
More informationLeaky Homes Financial Assistance Package (FAP) Repair plan example
LEAKY HOMES FINANCIAL ASSISTANCE PACKAGE FACT SHEET Repair Plan Example - June 2014 Page 1 Leaky Homes Financial Assistance Package (FAP) Repair plan example Introduction This repair plan example is intended
More informationBuilding Construction. Lightweight construction. Conventional Construction
Ventilation 53 Building Construction The firefighter s ability to safely and efficiently ventilate a building through its roof will depend to some degree on the firefighter s understanding of roof construction.
More informationPRESTRESSED CONCRETE FLOORING BEAMS
PRESTRESSED CONCRETE FLOORING BEAMS TRIED & TRUSTED Introduction Established in 2001 TT Concrete Products Limited has become a prominent manufacturer of prestressed concrete flooring beams throughout the
More informationFig. 2 WALL-TO-WALL PANEL CONNECTIONS CORNER WALL CONNECTION
SIPS SCREWS WITH MINIMUM 1" PENETRATION IN WOOD MEMBER IN SIP WALL PANEL CONNECTED TO @ 24" O.C. MAXIMUM OUTSIDE SKIN EACH SIDE OF FRAMING TYP. AS RECOMMENDED BY FOAM CORE AS EACH SIDE OF FRAMING TYP.
More informationIf stepping is required, step at 180mm as seen in this picture.
Cast Foundations to standard building regulations requirements. Foundations must be cast completely level, 600mm wide by 230mm deep for single storey, double storey is not allowed by NHBRC. If stepping
More informationENVIRONMENTAL INFORMATION APR 1200 products are made from glass mineral wool, one of the most environmentally friendly insulants available.
APR 1200 Acoustic Partition Roll CI/Sfb Ref: APR002 Glass mineral wool roll designed to provide high levels of sound insulation in walls and floors to meet Part E (England & Wales) and Section 5 (Scotland)
More informationCavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
More informationBest Practice in Best Pra ctice in teel constr uction - onstr industrial B uildings esidential Buildings 01 Introduction 02 Key Design Factors
Best Practice in Steel Construction - Industrial Residential Buildings Contents The Steel Construction Institute (SCI) develops and promotes the effective use of steel in construction. It is an independent,
More informationBUILDING CONTROL GUIDANCE FOR DOMESTIC LOFT CONVERSIONS
BUILDING CONTROL GUIDANCE FOR DOMESTIC LOFT CONVERSIONS OCTOBER 2010 EDITION 4-1 - Introduction This document intends to provide education and guidance on how some of the technical design and construction
More informationMark Cramer Inspection Services, Inc.
Mark Cramer Inspection Services, Inc. 492 Twentieth Avenue, Indian Rocks Beach, FL 34635-2970 (727) 595-4211 Fax (727) 596-7583 Certified Member #12085 American Society of Home Inspectors Construction
More informationBER Assessors Dwellings Technical Bulletin
BER Assessors Dwellings Technical Bulletin Issue No. 2/12 April 2012 Contents: 1. SUPPLEMENTARY ELECTRIC WATER HEATING IN SUMMER... 2 2. PITCHED ROOF U-VALUE CALCULATIONS... 8 2.1. PITCHED ROOF, INSULATED
More informationRESIDENTIAL PLUMBING ALTERATIONS PERMIT REQUIREMENTS
RESIDENTIAL PLUMBING ALTERATIONS PERMIT REQUIREMENTS The following guidelines are intended to assist with the permit acquisition process with regard to Plumbing Alterations. Not all information, or additional
More informationEAST LYME HIGH SCHOOL
Overview: 1971 N 1966 GYM 1966 CLASSROOM WING 1966 AUD. 1971 GYM 1998 1998 POOL EAST LYME HIGH SCHOOL Original 1966 Building: The original East Lyme High School was constructed in 1966 and was composed
More informationISO Types 1-6: Construction Code Descriptions
ISO 1 Frame (combustible walls and/or roof) Class 1B Buildings where the exterior walls are wood or other combustible materials, including construction where the combustible materials are combined with
More informationGYPROCK PARTY WALL INTERTENANCY WALL SYSTEMS FOR CLASS 1 BUILDINGS
GYPROCK PARTY WALL INTERTENANCY WALL SYSTEMS FOR CLASS 1 BUILDINGS CONTENTS Introduction 2 Applications 3 Advantages 3 Components 3 6 Design Considerations 7 8 System Features 10 Typical installation Sequence
More informationMUNICODE SERVICES LTD.
The Preserved Wood Foundation Guide MUNICODE SERVICES LTD. Prepared by MuniCode Services Ltd. Outline and Restrictions of this Guide The following information required for the construction of Preserved
More informationPart 7 Roofs. Chapter 7.2. Pitched roofs. Effective from 1 January 2012
Part 7 Roofs Chapter Effective from 1 January 2012 CONTENTS SCOPE DESIGN Clause Page Design standards D1 1 Statutory requirements D2 1 Loadbearing structure D3-D4 1 Trussed rafter roofs D5 1 Traditional
More informationTR21. I n s u l a t i o n. Low Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Fourth Issue March 2011 TR21 INSULATION FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT UP FELT AND MASTIC ASPHALT High performance rigid thermoset insulation
More informationTimber Frame Construction
Timber Frame Construction Introduction Design and Detailing What is timber? Failure modes History of timber frame construction Forms of timber frame construction Live and dead loads Wind loads Roof construction
More informationCONSTRUCTION DETAILS & LOAD DESIGN CHARTS
Office and Production 126 New Pace Rd., PO Box 279 Newcomerstown, OH 43832 1-800-446-2188, Fax: 740-498-4184 www.buildwithsips.com CONSTRUCTION DETAILS & LOAD DESIGN CHARTS Table of Contents Description
More informationFCA CARPENTRY & JOINERY THEORY. 10 SIMPLE ROOF CONSTRUCTION Part 2
CARPENTRY & JOINERY FCA CARPENTRY & JOINERY THEORY 10 SIMPLE ROOF Double Roofs A double roof is a roof whose rafters are of such a length that they require an intermediate support. This support is usually
More informationBuilding Control Guidance Note
Elements Renovation / Replacement. Issued 25/01/13 Rev a Page 1 of 9 (Applies to both Domestic and Non-Domestic Premises) Works relating to thermal elements can arise in building an extension, a material
More informationResidential Inspection Guidelines
Residential Inspection Guidelines 201 Pre-Pour Foundation Dimensions Building Location Certificate - if required in the building consent Construction and Advice Notes Check the building dimensions against
More informationBUILDING CONTROL GUIDANCE FOR NEW DWELLINGS & GARAGES
BUILDING CONTROL GUIDANCE FOR NEW DWELLINGS & GARAGES Dwellings upto 2 storeys with additional guidance for 3 storeys OCTOBER 2010: EDITION 5 Introduction This document intends to provide education and
More informationRoofers Guide to Underslating Membranes
Roofers Guide to Underslating Membranes IKO is a worldwide enterprise, with more than 3000 employees, and manufacturing plants in Canada, the United States, United Kingdom, Belgium, Holland, France and
More informationAsphalt Shingle Application Requirements
Alberta Allied Roofing Association Asphalt Shingle Application Requirements Section 1 Roof Decks 1.1 General Asphalt Shingles are not permitted to be installed directly over rigid insulation. When Asphalt
More informationtechnology UICK progressive sustainable any design, any shape, any colour, anywhere you like!
uality using advanced building technology UICK uality innovative progressive sustainable any design, any shape, any colour, anywhere you like! 2 NicheQ is an award winning progressive and innovative builder
More informationLow Energy Low Carbon Buildings
I n s u l a t i o n CI/Sfb (27.9) Rn7 M2 Eighth Issue March 2011 TR27 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD
More informationSquash Court Design general points
Squash Court Design general points Contents: Contents:... 1 1. Squash Court Dimensions... 2 2. CourtTech Walls... 3 3. Dimensional requirements for courts with CourtTech Walls... 3 4. Loading of CT System
More informationCARPENTRY - HOUSING. This is the sloping length of a right-angled triangle.
CARPENTRY - HOUSING PART 2: GABLE ROOFS The gable roof is classified as being double-pitched and one of the simplest roof forms, due to the fact that all rafters in the roof are exactly the same length
More informationTFL CUSTOM FIREPLACES WITH MASONRY BRICK LININGS. standard INSTALLATION SPECIFICATION INTO TIMBER FRAMING
6.CW.1A TFL CUSTOM FIREPLACES WITH MASONRY BRICK LININGS wood or gas standard INSTALLATION SPECIFICATION INTO TIMBER FRAMING The Fireplace Ltd is able to design and fabricate custom brick open masonry
More informationCustom 30 x 20-8 Garage Plan Plan #g233 By SDS-CAD Specialized Design Systems
P O Box 34 Mendon, Utah Custom 30 x 20-8 Garage Plan Plan #g233 By Page 1 Title Page Page 2 Main Floor Plan Page 3 Foundation Plan Page 4 Elevation Views Page 5 Framing and Details Page 6 Typical Section
More informationNEW AUSTRALIAN STANDARDS FOR MASONRY IN SMALL STRUCTURES S.J. LAWRENCE
NEW AUSTRALIAN STANDARDS FOR MASONRY IN SMALL STRUCTURES S.J. LAWRENCE Conjoint Professor Centre for Infrastructure Performance and Reliability The University of Newcastle Callaghan, NSW, Australia A.W.
More informationExtension. for. Pretend Customer 123 A Road HA7 9BP. at: 123 A Road HA7 9BP
for Pretend Customer at: Pretend Customer Site address: Monday, 23 November 2015 Dear Pretend Customer, Subject: Thank you for your valued enquiry and instructions to quote for the above project. We are
More informationHow To Certify The Scottsdale Construction System
BRE CERTIFICATION LIMITED PRODUCT SCOTTSDALE CONSTRUCTION SYSTEM CERTIFICATE NUMBER 129/07 DATE OF ISSUE December 2007 SUPPLIED BY Scottsdale Construction System Ltd SUMMARY The Scottsdale Construction
More informationChapter 6 ROOF-CEILING SYSTEMS
Chapter 6 ROOF-CEILING SYSTEMS Woodframe roof-ceiling systems are the focus of this chapter. Cold-formed steel framing for a roof-ceiling system also is permitted by the IRC but will not be discussed;
More informationNCMA TEK CONCRETE MASONRY FOUNDATION WALL DETAILS. TEK 5-3A Details (2003)
NCMA TEK National Concrete Masonry Association an information series from the national authority on concrete masonry technology CONCRETE MASONRY FOUNDATION WALL DETAILS TEK 5-3A Details (2003) Keywords:
More informationSample Drawing Package for One and Two Family Dwelling Applications
Sample Drawing Package for One and Two Family Dwelling Applications For a full list of submission requirements, refer to the relevant checklist for your application found on our website: http://vancouver.ca/home-property-development/application-forms-and-checklists.aspx
More information1/2" CDX PLY W/ 8d @ 6"/ 6"/ 12" 2x ROOF RAFTERS @ 16"OC W/ R-30 BATT. INSUL. (COMMON NAILS)
TYPE V CONSTRUCTION IS A CLASSIFICATION OF BUILDINGS BY CONSTRUCTION MATERIALS AND METHODS. IT IS THE LEAST RESTRICTIVE PERMITTED BY THE UNIFORM BUILDING CODE AND INCLUDES LIGHT, WOOD-FRAME CONSTRUCTION.
More informationTP10. Insulation RAFTER LEVEL INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES BBA BRITISH
Insulation CI/Sfb (27.9) Rn7 M2 Fifth Issue May 2007 TP10 RAFTER LEVEL INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES High performance rigid urethane insulation thermal conductivity 0.023 W/m.K
More informationC05. S03. P02 P08 FireWall. Including C05. S01. P02 Specialist partitions introduction
C05. S03. P02 P08 Including C05. S01. P02 Specialist partitions introduction C05 Specialist partitions Introduction Specialist partitions This section details specialist lightweight systems where high-security,
More informationStructural Assessment Report
Report Dallas Township Elementary School Dallas, Pennsylvania (JBCI Project No. 144911) 1655 Suburban Station Building 1617 John F. Kennedy Boulevard Philadelphia PA 19103 215 665 0497 5 Sandwood Drive
More informationCOMMONLY USED RESIDENTIAL BUILDING CODES
COMMONLY USED RESIDENTIAL BUILDING CODES INTERNATIONAL RESIDENTIAL CODE (2009) form revised 5/10 FOUNDATION 1. DESIGN OF FORMWORK. Section 1906.1 IBC 2009, Section R404.1.2.3.6 IRC 2009, ACI 318 Section
More informationUniclass L31:N14:P7111 C1/SfB (16.9) Rn7 (J4) February 2008. Foundation Heave Protection
Uniclass L31:N14:P7111 C1/SfB (16.9) Rn7 (J4) February 2008 Foundation Heave Protection The safe, sure way to provide foundation protection Clayshield is the proven solution to protecting foundations against
More informationLintel Product Selector
Uniclass L325:P4142 Cl/Sfb October 2014 EPIC F631:X442 (31.9) Hh2 www.catnic.com Lintel Product Selector October 2014 Care has been taken to ensure that the contents of this publication are accurate, but
More information