Use and store cleaning equipment and agents

Size: px
Start display at page:

Download "Use and store cleaning equipment and agents"

Transcription

1 This unit has 8 learning outcomes. 1. know how to prepare for cleaning the work area 2. know how to prepare cleaning equipment and 1.1. state the uses of different types of personal protective equipment 1.2. state the importance of ventilating the area 1.3. state the meaning of different warning signs 2.1. state the location of the storage area(s) and how to gain access 2.2. state the location of the nearest water and electricity supplies to the storage area 2.3. state the importance of colour coding 2.4. describe how to check that equipment is safe for use 2.5. state the organisational requirements for reporting faults 2.6. state the correct method for preparing cleaning solutions 2.7. state the meanings of warning signs used on cleaning agent containers

2 3. know how to use cleaning equipment and correctly and safely 4. know how to store cleaning equipment and correctly and safely 3.1. state the health and safety legislation which applies to the use of cleaning equipment and 3.2. describe what might happen if relevant legal requirements are not followed 3.3. describe the correct technique for using different types of equipment 3.4. state why it is dangerous to mix certain types of cleaning 3.5. state the importance of following manufacturer s instructions when dealing with cleaning 3.6. state types of problems that could occur when preparing and using cleaning 3.7. state how to deal with problems that could occur when preparing and using cleaning 3.8. state why work routines and sequences need to be followed 3.9. state what to look for when performing a post-cleaning inspection of the surface state how to reinstate the work area 4.1. identify where equipment should be stored 4.2. describe the correct procedures for the storage of cleaning 4.3. state the importance of the correct storage of cleaning 4.4. describe the correct method for storing equipment 4.5. state the importance of securing the storage area

3 5. be able to prepare for cleaning the work area 6. be able to prepare cleaning equipment and 7. be able to use cleaning equipment and correctly and safely 8. be able to store cleaning equipment and correctly and safely 5.1. select and wear appropriate personal protective equipment for the cleaning task 5.2. ventilate the area as appropriate 5.3. select and display appropriate warning signs 6.1. select the appropriate equipment for the task 6.2. carry out safety checks on the equipment 6.3. report any faults and problems with the equipment 6.4. select an appropriate cleaning agent for the task 6.5. prepare a cleaning solution 7.1. use different types of equipment correctly 7.2. clean surfaces systematically 7.3. carry out a post-cleaning check of the surface 7.4. dispose of left over cleaning correctly 7.5. reinstate the work area 7.6. clean used equipment and return it to the correct storage area 8.1. make sure the storage area is clean and tidy 8.2. store cleaning in line with health and safety requirements 8.3. store equipment in line with health and safety requirements 8.4. check stock levels of cleaning 8.5. report any shortages of cleaning 8.6. secure the storage area NOCN 2009

4 ASSESSMENT INFORMATION Guidance: This grid gives details of the assessment activities to be used with the unit attached. Please refer to the NOCN Handbook for definitions of each activity and the expectations for assessment practice and evidence for moderation. The assessment activities for this unit are indicated in the table below: Key: P = Prescribed this assessment method must be used to assess the unit. O = Optional this assessment method could be used to assess the unit. Case study Written question & answer/test/exam O Project Role play/simulation Essay Practical demonstration P Report Group discussion Oral question and answer O Performance/exhibition Written description Reflective log / diary Production of artefact Practice file Signposting Key Skills This unit offers clear opportunities for learners to provide evidence of achievement in Key Skills achievement in the following skill area/s: Key Skill Communication Information Technology Application of Number Wider Key Skill Working with others Problem solving Improving Own Learning and Performance

5 Accredited Start date: 01/10/2009 Accredited End date: 31/07/2017 Unit Sector/Subject area: 7.3 Unit Grading System: PASS Availability for Use: Shared Purpose and Aim of the Unit Restrictions on the Availability This unit is about the use and storage of equipment and cleaning in line with organisational procedures and health and safety. This unit is NOT suitable for cleaning washrooms. N/A Additional Assessment Requirements Details of relationship between the Unit and the NOS this unit is subject to Asset Skills principles of assessment which can be found at: QualificationsAndStandards/Qualifications.asp QCF unit developed from NOS C1 08 Details of relationship between the Unit and Standards (not NOS) N/A Endorsement of the Unit by

Improving Productivity Using IT

Improving Productivity Using IT This unit has 3 learning outcomes. LEARNING OUTCOMES The learner will: 1. Plan, select and use appropriate IT systems and software for different purposes. 2. Evaluate the selection and use of IT tools

More information

Credit Value: 4 GLH: 30 NOCN Unit Code: CQ1/2/QQ/007 QCA Unit Reference

Credit Value: 4 GLH: 30 NOCN Unit Code: CQ1/2/QQ/007 QCA Unit Reference This unit has 3 learning outcomes. LEARNING OUTCOMES The learner will: 1. Enter and combine text and other information accurately within word processing documents. 2. Create and modify layout and structures

More information

Levels 1 & 2 in Cleaning and Support Services Skills (QCF)

Levels 1 & 2 in Cleaning and Support Services Skills (QCF) Levels 1 & 2 in Cleaning and Support Services Skills (QCF) Qualification Handbook Level 1 Award/Certificate 7648-01 Award 500/9760/X Certificate 500/9209/1 www.cityandguilds.com May 2011 Version 1.1 Level

More information

Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards

Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards Cleaning and Support Services / Cleaning Services Supervision National Occupational Standards Contents C1 02 Maintain Personal Hygiene Standards when Cleaning... 3 C1 03 Do your job in a customer friendly

More information

CAF Unit Assessment Definitions

CAF Unit Assessment Definitions CAF Unit Assessment Definitions For use with apt awards Access to HE Common Access Framework units Assessment Definitions may be found on the reverse of all CAF units. The Optional choice should be applied

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 2 and 3 NVQ Certificate in Rail Engineering Traction and Rolling Stock (7597-05/10) September 2011 Version 1.1 (September 2011) Qualification at a glance Subject area Rail

More information

Hair. level 2 diploma in HairdressinG Practices. Candidate name: Candidate number:

Hair. level 2 diploma in HairdressinG Practices. Candidate name: Candidate number: Hair level 2 diploma in HairdressinG Practices Candidate name: Candidate number: an introduction to itec ITEC is the premier International Awarding Organisation for qualifications in Beauty, Complementary

More information

Hair. level 2 diploma in hairdressing. Candidate name: Candidate number:

Hair. level 2 diploma in hairdressing. Candidate name: Candidate number: Hair level 2 diploma in hairdressing Candidate name: 7 Candidate number: an introduction to itec ITEC is the premier International Awarding Organisiation for qualifications in Beauty, Complementary and

More information

Level 2 Certificate in Warehousing and Storage Skills (QCF)

Level 2 Certificate in Warehousing and Storage Skills (QCF) Level 2 Certificate in Warehousing and Storage Skills (QCF) Qualification Handbook www.cityandguilds.com September 2010 Version 1.1 Level 2 Certificate 1016-02 QAN 501/1082/2 About City & Guilds City &

More information

IAM Level 2 Certificate in Principles of Business and Administration

IAM Level 2 Certificate in Principles of Business and Administration IAM Level 2 Certificate in Principles of Business and Administration Qualification aim The IAM Level 2 Certificate in Principles of Business and Administration aims to develop learners knowledge and understanding

More information

This unit provides learners with an understanding of how to maintain stationery stock.

This unit provides learners with an understanding of how to maintain stationery stock. Unit Title: Principles of maintaining stationery stock OCR unit number 206 Sector unit number TC2-6 Level: 2 Credit value: 1 Guided learning hours: 8 Unit purpose and aim This unit provides learners with

More information

Level 2 NVQ in Refrigeration and Air Conditioning

Level 2 NVQ in Refrigeration and Air Conditioning Level 2 NVQ in Refrigeration and Air Conditioning Small Commercial Refrigeration and Air Conditioning Systems (6087-02) National occupational standards units (Assessment and evidence requirements) www.cityandguilds.com

More information

Unit Title: Unit purpose and aim

Unit Title: Unit purpose and aim Unit Title: Preparing and Operating Telescopic Handlers to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 25 Guided learning hours: 83 Unit expiry date: 31/10/2014 Unit purpose and aim

More information

HEALTH AND SOCIAL CARE

HEALTH AND SOCIAL CARE 2016 Suite Cambridge TECHNICALS LEVEL 3 HEALTH AND SOCIAL CARE Unit 24 Public health R/507/4445 Guided learning hours: 30 Version 2 Revised content March 2016 ocr.org.uk/healthandsocialcare LEVEL 3 UNIT

More information

ESB Level 2 Award in ESOL Skills for Life (Writing) (QCF)

ESB Level 2 Award in ESOL Skills for Life (Writing) (QCF) ESB Level 2 Award in ESOL Skills for Life (Writing) (QCF) Table of Contents Introduction 4 Qualification Profile 5 Glossary 6 Qualification Framework 7 Writing 1. Assessment criteria 8 2. Assessment paper

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (Composite Manufacture Engineering) (1712-35) August 2011 Version 1.0 Qualification at a glance Subject area City & Guilds

More information

Qualification and Assessment Specification

Qualification and Assessment Specification Qualification and Assessment Specification NOCN Level 3 Award in Skills for Employment, Training and Personal Qualification No: 601/1683/3 NOCN Level 3 Certificate in Skills for Employment, Training and

More information

Unit Title: Unit purpose and aim

Unit Title: Unit purpose and aim Unit Title: Preparing and Operating Sideloader Forklifts to Lift and Transfer Loads in the Workplace Level: 2 Credit value: 16 Guided learning hours: 53 Unit expiry date: 31/10/2014 Unit purpose and aim

More information

Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0

Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0 QUALIFICATION HANDBOOK Level 2 NVQ Diploma in Trowel Occupations (Construction) (6570-02) May 2014 Version 2.0 Qualification at a glance Subject area City & Guilds number 6570 Age group approved 16-18,19+

More information

Diploma in Management Level 4

Diploma in Management Level 4 Diploma in Management Level 4 This qualification is accredited by OFQUAL as being Stand Alone and part of Apprenticeships. Learners must achieve 37 credits and above to gain the Diploma qualification.

More information

Unit 1: Best practice in science (LEVEL 2)

Unit 1: Best practice in science (LEVEL 2) Unit 1: Best practice in science (LEVEL 2) Learning outcomes By completing this unit candidates will develop a thorough knowledge and understanding of the skills necessary to undertake scientific research.

More information

Millfields Community School Learning Environment Policy

Millfields Community School Learning Environment Policy Millfields Community School Learning Environment Policy CONTENTS 1. Aims 2. The Classroom Environment in KS1 and KS2 2a. The Early Years classroom environment 3. Resources 4. Books and folders 5. Health

More information

SFJCCAD2 Promote business continuity management

SFJCCAD2 Promote business continuity management Overview This unit is about providing advice and assistance on business continuity management, including general advice for the business and voluntary sectors, and specific advice and assistance to individual

More information

Unit purpose and aim. The Learner will: 1 Understand the structure of their organisation

Unit purpose and aim. The Learner will: 1 Understand the structure of their organisation Unit Title: Understanding the employing organisation OCR unit number 7 Sector unit number EA3-3 Level: Level 3 Credit value: 3 Guided learning hours: 23 Unit accreditation number R/600/1764 Unit purpose

More information

Pearson Edexcel Level 3 Certificate in Hospitality Retail Outlet Management (QCF) Specification

Pearson Edexcel Level 3 Certificate in Hospitality Retail Outlet Management (QCF) Specification Pearson Edexcel Level 3 Certificate in Hospitality Retail Outlet Management (QCF) Specification NVQ/Competence-based qualification First registration January 2014 Pearson Education Limited is one of the

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 2 Certificate and Diploma in Light Vehicle Maintenance & Repair Principles (4290-12/17) March 2011 Version 2.3 (September 2011) Qualification at a glance Subject area City

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK Level 2 Award in Biohazard Cleaning (2045-02) QUALIFICATION HANDBOOK November 2013 Version 1.1 Qualification at a glance Subject area City & Guilds number 2045-02 Age group approved 16-18, 19+ Entry requirements

More information

Level 3 Certificate in Printing and Graphic Communications (5261)

Level 3 Certificate in Printing and Graphic Communications (5261) Level 3 Certificate in Printing and Graphic Communications (5261) Scheme handbook www.city-and-guilds.co.uk Publications and enquiries City & Guilds publications are available from Publications Sales City

More information

Level 2 Award in. Food Safety in Catering (QCF) Specification. Ofqual Accreditation Number 600/0343/1

Level 2 Award in. Food Safety in Catering (QCF) Specification. Ofqual Accreditation Number 600/0343/1 Level 2 Award in Food Safety in Catering (QCF) Specification Ofqual Accreditation Number 600/0343/1 Ofqual Accreditation Start Date 01/01/2011 Ofqual Accreditation End Date 30/07/2018 Ofqual Certification

More information

CPPSEC2021A Install security equipment and systems

CPPSEC2021A Install security equipment and systems CPPSEC2021A Install security equipment and systems Release: 1 CPPSEC2021A Install security equipment and systems Modification History Not Applicable Unit Descriptor Unit descriptor This unit of competency

More information

Specification Essential Desirable

Specification Essential Desirable High Standards High Expectations Learning through Partnership Person Specification: Facilities Manager It is expected that the successful candidate will satisfy the following specification Specification

More information

Release: 1. ICPPRN493 Set up and monitor in-line printing operations

Release: 1. ICPPRN493 Set up and monitor in-line printing operations Release: 1 ICPPRN493 Set up and monitor in-line printing operations ICPPRN493 Set up and monitor in-line printing operations Modification History Release Release 1 Comments This version first released

More information

Business Resources. QCF Units of Assessment Final NVQ Units April 2010

Business Resources. QCF Units of Assessment Final NVQ Units April 2010 Business Resources QCF Units of Assessment Final NVQ Units April 2010 6 Graphite Square Vauxhall Walk London SE11 5EE T: 0207 0919620 F: 0207 0917340 Info@skillscfa.org www.skillscfa.org Contents No. Title

More information

UNIT 7: SKILLS FOR BABYSITTING IN THE HOME (LEVEL 1)

UNIT 7: SKILLS FOR BABYSITTING IN THE HOME (LEVEL 1) UNIT 7: SKILLS FOR BABYSITTING IN THE HOME (LEVEL 1) Learning outcomes By completing this unit candidates will demonstrate knowledge, understanding and skills to help them when planning to babysit and

More information

Manufacture. Unit Summary

Manufacture. Unit Summary Unit Summary This Unit is about starting up plant and equipment in the production, processing and packaging of food and drink products. Complying with health and safety and environmental requirements and

More information

Qualification details

Qualification details Qualification details PLEASE note that this strand to the proposed level 5 diploma will shortly be submitted for approval to develop further. What follows here is the Project Management strand with the

More information

Maintain gaming machine hardware and security in a Class 4 gambling environment

Maintain gaming machine hardware and security in a Class 4 gambling environment Page 1 of 5 Maintain gaming machine hardware and security in a Class 4 gambling environment Level 3 Credits 4 Purpose People credited with this unit standard are able to, in a Class 4 gambling environment:

More information

ASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations

ASTCCR2 - SQA Unit Code H548 04 Carry out and complete clean-room cleaning operations Carry out and complete clean-room cleaning Overview 1 Carry out clean-room 2 Remove and store equipment, tools and materials after clean-room 3 Remove and dispose of contaminated material after clean-room

More information

Department of Education and Children. Educational Support Officer Resources Support : Level 2

Department of Education and Children. Educational Support Officer Resources Support : Level 2 Department of Education and Children Educational Support Officer Resources Support : Level 2 Post ref No : Post Title : Hours : Contract : Responsible to : DOE&-002263 Education Support Officer 37 hours

More information

Undertaking Floristry Display Techniques

Undertaking Floristry Display Techniques Unit 6: Undertaking Floristry Display Techniques Unit code: QCF Level 3: Credit value: 10 Guided learning hours: 60 Aim and purpose A/602/0731 BTEC National This unit aims to give learners an understanding

More information

IAM Level 2. NVQ Certificate in Business and Administration. Qualification handbook. 2012 edition

IAM Level 2. NVQ Certificate in Business and Administration. Qualification handbook. 2012 edition IAM Level 2 NVQ Certificate in Business and Administration Qualification handbook 2012 edition Published by the IAM IAM 2012 Registered charity number 254807 Published 2012 All rights reserved. This publication

More information

ESB Level 1 Award in ESOL Skills for Life (Writing) (QCF)

ESB Level 1 Award in ESOL Skills for Life (Writing) (QCF) ESB Level 1 Award in ESOL Skills for Life (Writing) (QCF) Table of Contents Introduction 3 Qualification Profile 5 Glossary 6 Qualification Framework 7 Writing 1. Assessment criteria 8 2. Assessment paper

More information

Production/Machine Operator Life Sciences CURRICULUM/SYLLABUS

Production/Machine Operator Life Sciences CURRICULUM/SYLLABUS Production/Machine Operator Life Sciences CURRICULUM/SYLLABUS This program is aimed at training candidates for the job of a Production/Machine Operator, in the Life Sciences Sector/Industry and aims at

More information

Level 2 NVQ Diploma in Hospitality (7132) QCF version Qualification handbook for centres Housekeeping

Level 2 NVQ Diploma in Hospitality (7132) QCF version Qualification handbook for centres Housekeeping Level 2 NVQ Diploma in Hospitality (7132) QCF version Qualification handbook for centres Housekeeping www.cityandguilds.com August 2010 Version 1.1 Level 2 NVQ Diploma in Housekeeping To achieve the full

More information

SOUTH AFRICAN QUALIFICATIONS AUTHORITY ACT 58 OF 1995. No. 1348 26 September 2003

SOUTH AFRICAN QUALIFICATIONS AUTHORITY ACT 58 OF 1995. No. 1348 26 September 2003 SOUTH AFRICAN QUALIFICATIONS AUTHORITY ACT 58 OF 1995 No. 1348 26 September 2003 REGULATIONS RELATING TO LEVEL DESCRIPTORS FOR LEVELS 1 TO 4 OF THE NATIONAL QUALIFICATIONS FRAMEWORK The South African Qualifications

More information

SAMPLE ASSESSMENT KIT. BSB41307 Certificate IV in Marketing

SAMPLE ASSESSMENT KIT. BSB41307 Certificate IV in Marketing SAMPLE ASSESSMENT KIT BSB41307 Certificate IV in Marketing I n c l u d e s : A s s e s s m e nt Tasks M a r k i n g G u i d e M a p p i n g A s s e s s m e nt R e c o r d T o o l ASSESSMENT TASKS BSBWHS401A

More information

We are the regulator: Our job is to check whether hospitals, care homes and care services are meeting essential standards.

We are the regulator: Our job is to check whether hospitals, care homes and care services are meeting essential standards. Inspection Report We are the regulator: Our job is to check whether hospitals, care homes and care services are meeting essential standards. Harrow Health Limited 37 Love Lane, Pinner, Harrow, HA5 3EE

More information

Shampoo and Conditioning

Shampoo and Conditioning Unit 5: Shampoo and Conditioning Unit code: L/502/3753 QCF Level: BTEC Entry 3 Credit value: 3 Guided learning hours: 30 Unit aim This unit should enable learners to know about the effects of shampoo and

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Extended Diploma in Engineering Maintenance (1788-80) August 2013 Version 1.0 Revised version for registrations from August 1 st 2013 Qualification at a glance Subject

More information

Level 2 Certificate in Understanding the Safe Handling of Medicines (QCF)

Level 2 Certificate in Understanding the Safe Handling of Medicines (QCF) Skillsfirst Awards Handbook Level 2 Certificate in Understanding the Safe Handling of Medicines (QCF) SHMC2 Suite 215 Fort Dunlop Fort Parkway Birmingham B24 9FD www.skillsfirst.co.uk Contents Page Section

More information

ICTICT403 Apply software development methodologies

ICTICT403 Apply software development methodologies ICTICT403 Apply software development Release: 1 ICTICT403 Apply software development Modification History Release Release 1 Comments This version first released with ICT Information and Communications

More information

PRSSM419A Install networked security system

PRSSM419A Install networked security system PRSSM419A Unit descriptor Employability skills Application of the unit Unit sector ELEMENT Elements describe the essential outcomes of a unit of competency. 1 Prepare for installation. Install networked

More information

CPC31411 Certificate III in Construction Waterproofing

CPC31411 Certificate III in Construction Waterproofing CPC31411 Certificate III in Construction Waterproofing Release 2 CPC31411 Certificate III in Construction Waterproofing Modification History Revised qualification deemed equivalent to CPC31411 Elective

More information

keep records up-to-date, accurate, easy to read and signed 1.11 by the client and practitioner

keep records up-to-date, accurate, easy to read and signed 1.11 by the client and practitioner Unit 735 Provide Self-Tanning Services Guided Learning Hours: 27 Learning Outcome Assessment Criteria 1. Be able to maintain safe and effective 1methods of working when providing selftanning treatments

More information

Kto12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION AGRI FISHERY - ARTS HORTICULTURE (Exploratory)

Kto12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION AGRI FISHERY - ARTS HORTICULTURE (Exploratory) Course Description: Kto12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION AGRI FISHERY - ARTS HORTICULTURE (Exploratory) This Module is an exploratory and introductory course which leads

More information

ITEC Level 2 Diploma in Business Administration Rationale

ITEC Level 2 Diploma in Business Administration Rationale 2 Diploma in Business Administration Rationale Aims and Objectives The 2 Diploma in Business Administration is a vocational qualification regulated by Ofqual within the Qualifications and Framework. It

More information

Qualification Specification

Qualification Specification BCS Level 2 ECDL Certificate in IT Application Skills (QCF) 600/6943/0 Version 1.4 March 2016. Contents 1. About BCS 3 2. Equal Opportunities 3 3. Introduction to the qualification 4 3.1 Qualification

More information

Release 1. BSBWHS508A Manage WHS hazards associated with plant

Release 1. BSBWHS508A Manage WHS hazards associated with plant Release 1 BSBWHS508A Manage WHS hazards associated with plant BSBWHS508A Manage WHS hazards associated with plant Modification History Release Release 1 Comments This Unit first released with BSB07 Business

More information

National Certificate in Electricity Supply (Network Operator) (Level 4)

National Certificate in Electricity Supply (Network Operator) (Level 4) NQF Ref 0892 Version 3 Page 1 of 5 National Certificate in Electricity Supply (Network Operator) (Level 4) Level 4 Credits 88 Purpose This national certificate is awarded to people who have demonstrated

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Engineering Technical Support (Engineering Software Development) (1786-35) September 2011 Version 1.0 Qualification at a glance Subject area City & Guilds

More information

Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF)

Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF) www.highfieldabc.com Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF) Qualification Number: 600/6789/5 Highfield House Heavens Walk Lakeside Doncaster

More information

Specification. Edexcel NVQ qualification. Edexcel Level 3 NVQ Certificate in Management (QCF)

Specification. Edexcel NVQ qualification. Edexcel Level 3 NVQ Certificate in Management (QCF) Specification Edexcel NVQ qualification Edexcel Level 3 NVQ Certificate in Management (QCF) For first registration August 2010 Edexcel, a Pearson company, is the UK s largest awarding organisation offering

More information

SEMFEW226 - SQA Unit Code H2BJ 04 Cutting and shaping materials using NC/CNC laser profiling machines

SEMFEW226 - SQA Unit Code H2BJ 04 Cutting and shaping materials using NC/CNC laser profiling machines Cutting and shaping materials using NC/CNC laser profiling machines Overview This unit identifies the competencies you need to carry out cutting and profiling operations using NC/CNC laser profiling machines,

More information

UAL Photography. Award & Certificate Specifications

UAL Photography. Award & Certificate Specifications UAL Photography Award & Certificate Specifications UAL Photography Award and Certificate Specifications 1 Frame of Reference 1 1.1 Definition and characteristics 1 1.2 Objectives 1 1.3 Qualification structures

More information

IT Fault Diagnosis and Remedy

IT Fault Diagnosis and Remedy Unit 8: IT Fault Diagnosis and Remedy Unit code: K/601/3287 QCF Level 2: BTEC Specialist Credit value: 10 Guided learning hours: 60 Aim and purpose The aim of this unit is to give learners an understanding

More information

Model Assignment Issued July 2013 Level 4 Diploma in Business and Administration

Model Assignment Issued July 2013 Level 4 Diploma in Business and Administration Model Assignment Issued July 2013 Level 4 Diploma in Business and Administration Unit 1 Supporting Business Activities Please note: This OCR model assignment may be used to provide evidence for the unit

More information

Credit and Qualification Framework. Assessment Definitions

Credit and Qualification Framework. Assessment Definitions Credit and Qualification Framework Assessment Definitions 1. Case Studies Consideration of a particular, relevant situation or example, selected by the tutor or by learners, which enables learners to apply

More information

Unit purpose and aim. The learner may explain: What documentation the candidates organisation uses The company policies and procedures on

Unit purpose and aim. The learner may explain: What documentation the candidates organisation uses The company policies and procedures on Unit Title: Assess in the work environment OCR unit number 2 Sector unit number 2 Level: 3 Credit value: 6 Guided learning hours: 30 Unit accreditation number: H/601/5314 Unit purpose and aim The aim of

More information

Ga Rankuwa Hotel School Skills Programme

Ga Rankuwa Hotel School Skills Programme Ga Rankuwa Hotel School Skills Programme Name of the programme: Accommodation services Duration: 4 weeks Notional learning hours: 160 Admission requirements Prospective students should: at least have grade

More information

Understand your role

Understand your role The CARE CERTIFICATE Understand your role What you need to know THE CARE CERTIFICATE WORKBOOK Standard Your role - Tasks, Behaviours and Standards of work Your role will have a job description. This tells

More information

Action Plans: Supporting the Underachieving Student. Anglia Ruskin University

Action Plans: Supporting the Underachieving Student. Anglia Ruskin University Action Plans: Supporting the Underachieving Name: Name: Unenthusiastic attitude - not asking questions, lack of motivation or interest 1. Learning styles of student to be explored with Any learning difficulties

More information

VTCT Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF)

VTCT Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF) VTCT Level 3 NVQ Diploma in Hospitality Supervision and Leadership (QCF) Operational start date: 1 March 2012 Credit value: 37 Guided learning hours (GLH): 206-276 Qualification number: 600/4532/2 Statement

More information

Level 5 NVQ in Occupational Health and Safety Practice (3644) Candidate logbook

Level 5 NVQ in Occupational Health and Safety Practice (3644) Candidate logbook Level 5 NVQ in Occupational Health and Safety Practice (3644) Candidate logbook Publications and enquiries The publications listed below are available free of charge from Publications Sales City & Guilds

More information

Specification ISMM Level 2 NVQ Certificate in Sales (QCF)

Specification ISMM Level 2 NVQ Certificate in Sales (QCF) Specification ISMM Level 2 NVQ Certificate in Sales (QCF) Level 2 NVQ Competence Based Qualification for the Apprenticeship Valid from 01.12.12 Version 3 Ofqual regulated The Institute of Sales and Marketing

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Mechanical Manufacturing Engineering (CNC Machining) (1712-31) September 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number 1712-31

More information

Part-time/Sessional Economics Tutor

Part-time/Sessional Economics Tutor Job description and person specification Job Title: Sessional Economics Tutor Department: Academic Reports to: Centre Head Sally Romary Location: Amsterdam FoundationCampus Start Date: March 2015 The Company

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Diploma in Engineering Technical Support (Computer Control Programming) (1786-33) September 2011 Version 1.0 Qualification at a glance Subject area City & Guilds number

More information

Expository Reading and Writing By Grade Level

Expository Reading and Writing By Grade Level Expository and Writing By Grade Level Kindergarten TEKS identify the topic of an informational text heard identify the topic and details in expository text heard or read, referring to the words and/or

More information

JOB DESCRIPTION. Database Support and Import Administrator

JOB DESCRIPTION. Database Support and Import Administrator JOB DESCRIPTION Job Title: Division: Department/Region/Section: Location: Reports to: Responsible for: Grade: Database Support and Import Administrator Income Generation Fundraising Southwater, HQ Database

More information

Unit 5/LD 205(K): Principles of positive risk taking for individuals with disabilities

Unit 5/LD 205(K): Principles of positive risk taking for individuals with disabilities Unit 5/LD 205(K): Principles of positive risk taking for individuals with disabilities Unit code: QCF Level 2: K/601/6285 BTEC Specialist Credit value: 2 Guided learning hours: 20 Unit aim This unit provides

More information

Qualification Specification HABC Level 3 Award in Supervising Food Safety in Catering (QCF)

Qualification Specification HABC Level 3 Award in Supervising Food Safety in Catering (QCF) www.highfieldabc.com Qualification Specification HABC Level 3 Award in Supervising Food Safety in Catering (QCF) Qualification Number: 500/5471/5 Highfield House Heavens Walk Lakeside Doncaster South Yorkshire

More information

SAFETY SIGNAGE PROCEDURE

SAFETY SIGNAGE PROCEDURE Page 1 of 10 SAFETY SIGNAGE PROCEDURE 1.0 PURPOSE 1.1 To enable a reference to signage to meet legislative requirements and ensure in cases of emergency appropriate signage is visible. 2.0 SCOPE 2.1 This

More information

Water Networks Technician Unit WNTC07 - Network Performance Monitoring

Water Networks Technician Unit WNTC07 - Network Performance Monitoring Water Networks Technician Unit WNTC07 - Network Performance Monitoring This training specification has been developed from the Water Process Technician Standard. The specification details the minimum training

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 3 NVQ Extended Diploma in Engineering Maintenance (1788) May 2014 Version 3.0 Qualification at a glance Subject area City & Guilds number 1788 Age group approved 18+, 19+ Entry

More information

POULTRY MANAGEMENT Manage poultry layer unit operations

POULTRY MANAGEMENT Manage poultry layer unit operations 1 of 6 level: 4 credit: 32 planned review date: December 2008 sub-field: purpose: entry information: accreditation option: moderation option: Poultry Production People credited with this unit standard

More information

Level 2 Certificate in Warehousing and Storage Principles (1012)

Level 2 Certificate in Warehousing and Storage Principles (1012) Level 2 Certificate in Warehousing and Storage Principles (1012) Qualification handbook 500/5764/9 www.cityandguilds.com October 2013 Version 2.1 About City & Guilds City & Guilds is the UK s leading provider

More information

Risk management a practical approach

Risk management a practical approach Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries

More information

For students entering Part 1 in 2008/9. Relevant QAA subject Benchmarking group(s): Social Sciences Faculty. Programme length: Programme Advisor:

For students entering Part 1 in 2008/9. Relevant QAA subject Benchmarking group(s): Social Sciences Faculty. Programme length: Programme Advisor: BA in Social Work For students entering Part 1 in 2008/9 Awarding Institution: Teaching Institution: Relevant QAA subject Benchmarking group(s): Faculty: Programme length: Date of specification: Programme

More information

NQF Level: 2 US No: 116126

NQF Level: 2 US No: 116126 NQF Level: 2 US No: 116126 Facilitator Guide Primary Agriculture Apply Marketing Principles in Agriculture Facilitator:.......................................... Company:..........................................

More information

Workplace Safety Inspections Adopt a systematic approach by inspecting 8 areas of safety:

Workplace Safety Inspections Adopt a systematic approach by inspecting 8 areas of safety: Workplace Safety Inspections Adopt a systematic approach by inspecting 8 areas of safety: 1. MANAGEMENT - An indication that the safety management system is working effectively is a good starting point.

More information

Debbie Hepplewhite s suggestions for effective and supportive phonics provision and practice

Debbie Hepplewhite s suggestions for effective and supportive phonics provision and practice Debbie Hepplewhite s suggestions for effective and supportive phonics provision and practice Are the following suggestions features of your phonics provision and practice? You may find this information

More information

Quality Assessment Framework Core Service Objectives

Quality Assessment Framework Core Service Objectives Quality Assessment Framework Core Service Objectives NIHE Supporting People Contents C1.1 Assessment and Support Planning...3 C1.2 Security, Health and Safety..11 C1.3 Safeguarding and Protection from

More information

Preparing a maintenance plan

Preparing a maintenance plan The maintenance series Information sheet 1.1 Preparing a maintenance plan Introduction The regular expenditure of a small amount of maintenance funds is much better for a building, and more cost effective,

More information

Security. Deployment Protocol for BWC s (Appendix H)

Security. Deployment Protocol for BWC s (Appendix H) (Appendix H) Ref: 1012 Rev: Author: Approver: Date: 24/08/12 Introduction North East Lincolnshire Partnership Car Parks Department owns 18 Body Worn cameras, hereinafter referred to as BWCs. This document

More information

EVENT MANAGEMENT. Examine the costs (budget) Define your goals Consider what evaluation methods you will incorporate. - Manpower.

EVENT MANAGEMENT. Examine the costs (budget) Define your goals Consider what evaluation methods you will incorporate. - Manpower. EVENT MANAGEMENT Introduction Many sport and recreation clubs are responsible for co-ordinating and delivering one-off and ongoing programs and events ranging from a social function at the local club to

More information

SKACH11 Hair colour correction services

SKACH11 Hair colour correction services Overview This standard is about the advanced skills necessary to determine and correct more complex colouring problems. To achieve this standard, you must be able to remove artificial colour, remove bands

More information

QUALIFICATION HANDBOOK

QUALIFICATION HANDBOOK QUALIFICATION HANDBOOK Level 2 Extended Certificate in Health Informatics (7450-12) February 2012 Version 1.0 Qualification at a glance Subject area City & Guilds number 7450 Health Informatics Age group

More information

THE WORSHIPFUL COMPANY OF SPECTACLE MAKERS

THE WORSHIPFUL COMPANY OF SPECTACLE MAKERS THE WORSHIPFUL COMPANY OF SPECTACLE MAKERS WCSM Level 2 Certificate in Spectacle Manufacturing Operations (QCF) QUALIFICATION HANDBOOK QAN 600/9967/7 July 2013 Contents Page no. Qualification Objective

More information

SEMETS3-68 Performing engineering software configuration management

SEMETS3-68 Performing engineering software configuration management Performing engineering software configuration management Overview This unit identifies the competences you need to perform software configuration management activities, from initial product definition

More information