The Sydney Opera House: Modeling the Opera Theatre
|
|
- Hillary Stone
- 7 years ago
- Views:
Transcription
1 The Sydney Opera House: Modeling the Opera Theatre AIA Technology in Architectural Practice Knowledge Community 3rd Annual Building Information Model Awards
2 Aerial photograph showing Opera Theatre location The Sydney Opera House : Modeling the Opera Theatre Over recent years an international partnership of architects and a local team of consultants including a structural engineer have been working closely on the review and study of the Opera Theatre interior as part of the Strategic Building Plan. Initially the architect and structural engineer used a single platform package to facilitate interoperability between their models. They were later joined on the same platform by the MEP engineer. The structural engineer and MEP engineer were both involved in the original building design and construction and therefore held large amounts of recorded information which was invaluable in creating the existing conditions Opera Theatre BIM. The architect was responsible for modeling all architectural finishes, such as acoustic paneling within the theater auditorium, bronze elements, and precast wall and floor finishes. The structural engineer was responsible for modeling all structural concrete walls, floors, major beams and columns, auditorium seating bowl and roof shell structure. Cutaway section through the Opera Theatre Due to the complex nature of the acoustic paneling throughout the auditorium, a building surveyor was engaged to create a 3D laser scanned survey. This gave a plus/minus 20mm accuracy point cloud which was then converted into a surface model. This provided a base model to create the acoustic panel model for use in acoustic analysis software. Opera Theatre acoustic panel laser survey 2
3 Running in parallel, the structural engineer completed the auditorium bowl structural model. Survey data in both 2D and 3D was constantly reviewed to identify where deemed as-built information could give misleading results and require re-interpretation. Existing primary mechanical duct runs were modeled in and around the Opera Theatre auditorium to assist in establishing where new plant rooms and duct runs could be located, and their often complex relationships to surrounding structural and architectural elements. It has long been a problem for the Opera House to follow the paper-trail of existing structural and architectural documentation for any part of the building. Therefore the opportunity was taken, along with the digital modeling, to introduce a tagging system of drawing information. Addition of description tags to model elements This proved of great benefit as structural and architectural components held invisible descriptions of the source of drawing information for that element e.g. a wall was given a tag with its unique number from the original construction drawing documentation as well as from all associated reference information. These component description tags could then be reported on with a custom written script, making the model a library of drawings as well as a documentation model. 3
4 The BIM holds all of this information which can then be extracted in the form of a HTML report that contains hyperlinks to a pre-created CD of all the structural and architectural drawings in TIFF format. With one mouse click the relevant component drawing can be displayed, removing the need for a tedious search through drawing registers. One of the most significant achievements with this complete BIM process is the linking of the structural model directly to the Opera House master door schedule. This schedule indicates fire compartmentation, designation of space as well as functional use of that space. For example, by attaching the official door number designation in the master door schedule database with the unique identifier tag from the structural model door component, a direct link between the model and database was achieved. Hyperlinked drawings from BIM By using this linked method it is possible to locate a door number in the external FM database and immediately open the database which holds all the information about the wall containing that door, as well as compartmentation of the space and all asset and facility management information. This system is bi-directional, either working from the BIM to the FM database or from the FM database to the BIM. Future links will allow direct connection to FM / asset management software packages. 4 BIM database linkage
5 Various interior schemes used in preliminary investigations The benefit of this integrated process is that the client can use the BIM for documentation as well as building management, therefore creating a powerful interactive window between the physical model and the building information data sets. Once the combined structural and architectural model of existing conditions had been completed, studies were then carried out on a wide range of potential re-configurations of auditorium surfaces, within the overall constraint represented by the shell roof. This integrated modeling process was invaluable in the documentation of the schemes, to show where the existing structure remained, where the new structure was introduced and how high-level work might relate to the underside of the shell roof. 5
6 Acoustic analysis, fire simulation analysis, evacuation and egress modeling, then used exchange of model information via IFC 2X3 format or by simple DXF to the non IFCcompatible analytical packages. Experiments have also been conducted using extensive data exchanges via IFC2X3, and there is now a concurrent Archicad and Revit Structure model exported from the original Bentley structural and architectural models being currently utilized by other consultant team members. Regarding other improvement projects at the Opera House, the recent addition of the western foyer colonnade was fully modeled in advance for the purpose of construction documentation. Pre-existing structural conditions were also modeled to improve coordination of the new work with the old. Further work is now planned for renovation of the western foyers, an area running most of the length of the western side of the Concert Hall, and this will use the same method. Queen Elizabeth formally opened the Western Colonnade on 13 March Internal image of Western Foyers External image of Western Colonnade 6
7 Perspective Isometric cutaway of the Opera Theatre Current work within the Opera House Facilities Management Group involves designing a web-based intranet and internet system which will use the continually growing BIM as a backbone. The intention is that all information held by the Opera House, and generated by external consultants and sub-contractors, will be loaded into a central server database. Both Opera House staff and external consultants and contractors will be able to access this large composite set of building information. This process will also allow the possibility of data mining that may reveal seasonal trends, and earlier identification of potential operational problems. The days of using 3D models just to generate 2D documentation are fast disappearing, and as BIM technology develops we will approach true integration. Clients can then look forward to improved confidence in design documentation, in predictive modeling, and in management of building operations during the life of the asset. In the case of the Sydney Opera House, this is an asset which has a life cycle in excess of 250 years. Mark Arkinstall 7
8
From 3D Laser Scanning to Revit. Processes, Products and Questions
From 3D Laser Scanning to Revit Processes, Products and Questions Topics Scanning Overview Recommended Processes Best Practices Up-front questions to ask Tools and Technologies, including the new Scan
More informationOlilo's AEC Design Services. SrinSoft Inc, Partners of
Olilo's AEC Design Services SrinSoft Inc, Partners of Olilo provides design services that include design and analysis, cost estimation, 3D modeling, 2D drafting, conversion from 2D to 2D, quantity take-off,
More informationBuilding Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design
Building Information Modeling (BIM) Requirements for PT Projects Today s Capabilities for a BIM based Design Florian Aalami CEO ADAPT Corporation florian@adaptsoft.com What is BIM? The ability to model
More informationProceedings of Meetings on Acoustics
Proceedings of Meetings on Acoustics Volume 19, 2013 http://acousticalsociety.org/ ICA 2013 Montreal Montreal, Canada 2-7 June 2013 Architectural Acoustics Session 5aAAa: Room Acoustics Computer Simulation
More informationBeijing National Swimming Centre, China American Institute of Architects Building Information Model (BIM) Awards Competition 2004 (TAP) Knowledge
Beijing National Swimming Centre, China American Institute of Architects Building Information Model (BIM) Awards Competition 2004 (TAP) Knowledge Community Beijing National Swimming Centre The National
More informationLaser Scanning for an Integrated BIM
Laser Scanning for an Integrated BIM By: Duane Gleason Lake Constance 5D-Conference 2013 Constance, 28th-29th of October Introduction The application of laser scanning technology has been popular in the
More information3Dcities INDIA. www.3dcindia.com. Architecture and Engineering Outsourcing Company since 1999
3Dcities INDIA Architecture and Engineering Outsourcing Company since 1999 www.3dcindia.com We are an India based organisation provides a range of products and services linked to our core discipline of
More informationBIM Extension into Later Stages of Project Life Cycle
BIM Extension into Later Stages of Project Life Cycle Pavan Meadati, Ph.D. Southern Polytechnic State University Marietta, Georgia This paper discusses the process for extending the implementation of the
More information3D Laser Scanning for Manufacturing Facilities Developing the Business Case. By Bill Campbell Founder, Digital Dimensions 360, LLC
3D Laser Scanning for Manufacturing Facilities Developing the Business Case By Bill Campbell Founder, Digital Dimensions 360, LLC Table of Contents Introduction The Importance of Accuracy Workflow and
More informationAutodesk Revit LEARNING PATH BUILDING DESIGN SUITE
Autodesk Revit LEARNING PATH FUNDAMENTALS Duration: 3 days Cost: R5 500 (excl VAT) Revit MEP Duration: 3 days Cost: R5 500 (excl VAT) Revit Structure Duration: 3 days Cost: R5 500 (excl VAT) REVIT ADVANCED
More informationCollaborating Across Disciplines with Revit Architecture, MEP, and Structure
Collaborating Across Disciplines with Revit Architecture, MEP, and Structure David Cohn AB104-3 Are you ready to take the next step and use building information modeling to share data across the entire
More informationRevit and BIM for Facilities Management
Revit and BIM for Facilities Management Course Length: 1 day Revit and BIM for Facilities Management is a one day hands-on workshop that will introduce you to what Building Information Modeling is and
More informationOPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School
OPEN BIM Collaboration Pilot: The Faith Lutheran College Secondary School Fulton Trotter Architects Overview The Faith Lutheran College Secondary School is located in the suburb of Plainland one hour West
More informationWhat s New in Autodesk Revit 2014
Building Design Suite 2014 What s New in Revit 2014 * Revit 2014 software is only available as part of the Building Design Suite 2014 Premium and Ultimate Editions. New & Enhanced Features Platform & For
More informationProfessional CAD System
Professional CAD System > ARCHITECTS site plans > BUILDERS > RESIDENTIAL DESIGNERS floor plans elevations 3D models details sigma design BuildersCAD Complete System Only $ 995 Professional CAD System High
More informationMASTER CLASS INTEGRATED PROJECT MANAGEMENT SOFTWARE REPORT 2009. Timo Hartmann t.hartmann@ctw.utwente.nl
Technical Paper #5 MASTER CLASS INTEGRATED PROJECT MANAGEMENT SOFTWARE REPORT 2009 Timo Hartmann t.hartmann@ctw.utwente.nl COPYRIGHT 2009 VISICO Center, University of Twente visico@utwente.nl Integrated
More informationTobin Center for the Performing Arts
Tobin Center for the Performing Arts Building 6 (Over 75 Million Dollars) Project Description The Project consisted of the complete renovation of the historic Municipal Auditorium s treasured façade while
More informationCoordinating and Sharing Information with Revit Architecture and Revit Structure Best Practices!
Revit Architecture and Revit Structure Best Practices! Erleen Hatfield Thornton-Tomasetti Uk Jung SE304-1 This class identifies best practices using Revit Architecture and Revit Structure for sharing and
More informationBuilding Information Modeling Management To Facility Management
To Building Information Modeling Management To Facility Management I: INTRODUCTION - aaecs Team Thomas J. Jeff Prine, CCM, LEED AP COO Program / Facility Management Specialist Bonnie K. Gorman, Assoc.
More informationHow To Understand Building Information Modeling
BIM (Building Information Modeling) and Pedagogical Challenges Jeong Han Woo Western Illinois University Macomb, IL BIM is a new building design and documentation methodology that makes the construction
More informationAutodesk Robot Structural Analysis Professional 2010. Break it down before you build it up.
Autodesk Robot Structural Analysis Professional 2010 Break it down before you build it up. Building Information Modeling for Structural Engineering Integrated tools for modeling, coordination, analysis,
More informationSTICKLEY AUDITORIUM RENOVATION Community and Stakeholder Presentation
STICKLEY AUDITORIUM RENOVATION Community and Stakeholder Presentation APRIL 30, 2014 SCHEMATIC DESIGN PROGRESS Code Study Analysis: key issues and resolutions Seating Analysis of sightlines, seating and
More informationUsing BIM In HVAC Design
This article was published in ASHRAE Journal, June 2010. Copyright 2010 American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. Posted at www.ashrae.org. This article may not be
More informationDesign without compromise. Autodesk Revit. Architecture 2010
Design without compromise. Autodesk Revit Architecture 2010 BIM Simply a Better Way of Working Deliver projects faster, more economically, and with enhanced potential for reduced environmental impact.
More information2012 BIM Guidelines and Standards (Rev. 00) University at Albany
A. Building Information Modeling (BIM) Guidelines: The Office of AECM will require the submission of BIM modeling files as part of an electronic file submission to the AECM project manager as requested
More informationCreatemaster Ltd, 44-48 Paul Street, London EC2A 4LB
Createmaster foster a relationship approach with all clients, project teams, suppliers and employees in the belief that it is people that matter and can make a difference between a successful and unsuccessful
More informationCertified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
More informationTHE ACOUSTIC DESIGN OF THE NEW DRAMA HOUSE FOR THE ROYAL THEATRE IN COPENHAGEN
THE ACOUSTIC DESIGN OF THE NEW DRAMA HOUSE FOR THE ROYAL THEATRE IN COPENHAGEN A C Gade B Mortensen Gade & Mortensen Akustik A/S, Charlottenlund, Denmark,acg@gade-mortensen.dk Gade & Mortensen Akustik
More informationBIM: FOR PROJECT MANAGERS. 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am
BIM: FOR PROJECT MANAGERS ANA BAKER BRANDON GARRETT 2011 CSI Southwest Region Conference Program 1B 8:45am 11:00am 1 2 3 4 BIM Overview BIM Level of Development Evolution of the Drawing Process BIM Workflow
More informationInteroperability with Structural Disciplines
Interoperability with Structural Disciplines GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability information. Interoperability with Structural
More informationTHE ROAD TO PRODUCTIVITY
THE ROAD TO PRODUCTIVITY Lessons Learned by the Structural Steel Industry Tom Faraone, PE Senior Regional Engineer October 31, 2006 It started with the mills TODAY 1980 PRODUCTIVITY Today.5 man-hours/ton
More informationMAGILL ASSOCIATES 1 1.1 2 C.9 FIRST FLOOR PLAN. architecture / planning / interiors
EXISTING CURB AND NEW SIDEWALK. REF: CIVIL 1 1.1 2 3 4 5 6 109 111 114 A MAGILL ASSOCIATES architecture / planning / interiors POL. CONCRETE FLOOR HERE 111A 4' x 4' ANGLED BAFFLE AT TOP OF 12' WALL. 112
More informationT170 Interior Design Technology MTCU Code 61833 Program Learning Outcomes
T170 Interior Design Technology MTCU Code 61833 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes The graduate has reliably demonstrated the ability to 1. analyze a client's needs
More informationRevit MEP. Autodesk Navisworks
What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout
More informationCOBIM. Series 3. Architectural design. Common BIM Requirements 2012. v 1.0
COBIM v 1.0 Common BIM Requirements 2012 Series 3 Architectural design Series 3 Author Gravicon Oy Tomi Henttinen Foreword The publication series Common BIM Requirements 2012 is the result of a broad-based
More informationEffective Collaboration
AUTODESK BUILDING SOLUTIONS Effective Collaboration Exporting Revit Architecture Models as ACIS Solids for Use in AutoCAD MEP The intent of this paper is to explain a process by which architects using
More informationfor Revit MEP The professional s choice for Building Services
for Revit MEP The professional s choice for Building Services The professional s choice for Building Services With MagiCAD, all modelling is highly automated, fast and accurate. Checking the model and
More informationBIM Department. BIM Modeling Using Faro Focus3D Laser Scanner
BIM Modeling Using Faro Focus3D Laser Scanner Contents What is Laser Scanning? Advantages of Laser Scanning BIM Workflow Process Scanner Unit Set-up and Scanning Processing Scan Files BIM Software Creating
More informationPoint Clouds-To-BIM For Sustainability
Point Clouds-To-BIM For Sustainability Cliff Moser, AIA 35 years in the Design and Construction Industry. VP BIM Services Neilsoft (www.neilsoft.com) Past Chair of ASQ Design and Construction Division
More informationAutodesk Revit Architecture. Design without compromise.
Autodesk Revit Architecture Design without compromise. Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
More informationA BIM Case Study: SELCEN Mimarlik
A BIM Case Study: SELCEN Mimarlik Final Submission 19 January 2012 Yekta Ipek 523101013 MBL607E::Building Information Models Instructor: Salih Ofluoglu Istanbul 2012 Building Information Models Final Submission
More informationYale Arts Complex. The design results from the integration of programmatic, structural and mechanical needs. It includes
New Haven, Connecticut 1 2 Yale University s Rudolph Building formerly known as the Art and Architecture Building was designed in 1963 by the modern master and then chair of the School of Architecture,
More informationMarketing Coordinator Bootcamp Session 2: ABCs of AEC
Marketing Coordinator Bootcamp Session 2: ABCs of AEC Debbie Chen, LEED AP, APMP CF Proposal Development Director Louis Berger hchen@louisberger.com Matthew Daw, PE, LEED AP Principal Keast & Hood mdaw@keasthood.com
More informationBUILDING A STRATEGY FOR BIM
BUILDING A STRATEGY FOR BIM A Roadmap for Clients Graham Jones Chair, Davis Langdon BIM Steering Group Building a Strategy for BIM: A roadmap for Clients Introduction Conditions for Success Why? What How?
More informationInnovative capture and modeling of existing building conditions using 3D laser scanning. Entry B Submission
Innovative capture and modeling of existing building conditions using 3D laser scanning Entry B Submission Executive Summary As a large owner organization, understanding and developing new technologies
More informationCOBIM. Series 1. General part. Common BIM Requirements 2012. v 1.0
COBIM v 1.0 Common BIM Requirements 2012 Series 1 General part Foreword The publication series Common BIM Requirements 2012 is the result of a broad-based development project entitled COBIM. The need for
More informationwww.smap3d Plant Design.com
www.smap3d Plant Design.com Successful projects with Smap3D Plant Design "Our partner has solved all questions of detail with a homogenous complete solution. We are already impressed by the usability and
More informationd e n v e r a r t m u s e u m
d e n v e r a r t m u s e u m The Denver Art Museum Expansion will be a dramatic addition to the downtown Denver skyline and will help place Denver among the top art centers in the nation. The new addition
More informationSRISHTI TECHNICAL SERVICES L.L.C
SRISHTI TECHNICAL SERVICES L.L.C Coming under SRISHTI Group. is a team of experienced and qualified skilled specialists that provide expertise in Interior fit outs & BIM along with having a full qualified
More informationDeveloping 6D BIM Energy Informatics for GDL LEED IFC Model Elements
Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management Istanbul, Turkey, July 3 6, 2012 Developing 6D BIM Energy Informatics for GDL LEED IFC Model Elements
More informationCITY COLLEGE OF SAN FRANCISCO (CCSF) Building Information Modeling (BIM) Standards for Design-Bid Build Projects. CCSFBIMS Version 1.
CITY COLLEGE OF SAN FRANCISCO (CCSF) Building Information Modeling (BIM) Standards for Design-Bid Build Projects CCSFBIMS Version 1.0 Prepared by: CCSF Facilities Planning & Construction (FPC) Department
More informationSynergy: Building Information Modeling and
: Building Information Modeling and Assoc. Professor Rafael Sacks BIM Handbook Symposium Georgia Tech Atlanta, GA, 13 th March 2008 Introduction Both and BIM are deep process changes, in thinking and in
More informationPROJECT COST ESTIMATES & FEASIBILITIES
PROJECT COST ESTIMATES & FEASIBILITIES Project Cost and budget management Project success elements Scope meet the scope defined for the project Budget It is within established budget Programme It is designed
More informationRequest for Proposal Autodesk CAD Support
Request for Proposal Autodesk CAD Support Introduction Denver Water is inviting your firm to submit a proposal to provide Autodesk product-based services and support to meet the requirements of Denver
More informationMenu of Architecture Services 2009
Menu of Architecture Services 2009 We deliver architecture and interior design services in an accessible, easy to use format. We help you to select services that suit your project, budget and level of
More informationBIM and API Extensions
REVIT BUILDING INFORMATION MODELING BIM and API Extensions This whitepaper explains how the utility of BIM solutions such as Revit Structure software can be broadened through the use of specialized software
More informationt e c h n o l o g y BIM Services 1
BIM Services 1 What is BIM? Building Information Modeling (BIM) is our digital modeling toolset that allows us to create and manipulate virtual model environment with information of services properties
More informationA CLOUD-BASED FRAMEWORK FOR ONLINE MANAGEMENT OF MASSIVE BIMS USING HADOOP AND WEBGL
A CLOUD-BASED FRAMEWORK FOR ONLINE MANAGEMENT OF MASSIVE BIMS USING HADOOP AND WEBGL *Hung-Ming Chen, Chuan-Chien Hou, and Tsung-Hsi Lin Department of Construction Engineering National Taiwan University
More informationArchiCAD 16 introduces a comprehensive ecosystem of solutions to ease the creation, sharing, and finding of custom BIM Components.
16 ArchiCAD 16 introduces a comprehensive ecosystem of solutions to ease the creation, sharing, and finding of custom BIM Components. Builtin Energy Evaluation turns ArchiCAD 16 into the greenest BIM solution
More information1 TABLE OF CONTENTS. 1. BIM Execution Plan. BIM Execution Plan- UF Minor Projects Template UF-000 2 of 20 pages. 1.1. Processes...
1 TABLE OF CONTENTS 1. BIM Execution Plan 1.1. Processes... 3 1.2. Addendum to UF Contracts... 4 1.3. Methodology... 4 1.4. Project Overview / General Information... 4 1.5. Project Collaboration Team...
More informationRevised Work Scope Dated April 23 rd, 2015
Revised Work Scope Dated April 23 rd, 2015 2.4 SCOPE OF SERVICES The following combines the Scope of Services included in RFQ No. 671 dated March 12, 2015 and the Invitation to Interview letter dated March
More informationLACCD Building Information Modeling Standards For Design-Bid Build Projects
LACCD Building Information Modeling Standards For Design-Bid Build Projects (LACCD BIMS) Interim Version 2.0 Prepared by: September 9, 2009 TABLE OF CONTENTS 1. INTRODUCTION 1 1.1. Overview 1.2. Main Objectives
More informationProjects. Cultural centre in Jinan. Europaconcorsi Beta. Grand Theatre. JINAN, China. Publications Jinan Cultural Centre
Language: Italiano English Europaconcorsi Beta Projects JINAN, China Cultural centre in Jinan Grand Theatre PAUL ANDREU ARCHITECTE PARIS, RICHEZ_ASSOCIÉS ARCHITECTURE, BIAD Publications Jinan Cultural
More informationShort Interval Production Schedule Research
Short Interval Production Schedule Research Background Nationals Park has multiple highly repeatable tasks that can be scheduled as efficiently as possible by the development of a Short Interval Production
More informationA WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL AND MECHANICAL ENGINEERING DEPARTMENT OF ARUP TURKEY
ISTANBUL TECHNICAL UNIVERSITY FACULTY OF ARCHITECTURE DEPARTMENT OF DESIGN COMPUTING BIM 2037 / BUILDING INFORMATION MODELS INSTRUCTOR: Salih OFLUOĞLU A WORKFLOW ANALYSIS FOR BIM SOFTWARE: ARCHITECTURAL
More informationREYNAERS. 16 oktober 2014
1 REYNAERS 2 REYNAERS 3 REYNAERS 4 REYNAERS 5 REYNAERS General information OUR ACTIVITIES RESEARCH : focus on innovation, search for new concepts and materials + calculations/simulations DEVELOPMENT :
More informationThe importance of the I in BIM
The importance of the I in BIM By Dr Stephen Hamil Director of Design and Innovation and Head of Building Information Modelling at NBS Building Information Modelling (BIM) is here to stay. However, which
More informationCARPENTRY TRAINING COURSE & WOOD HANDBOOK
CARPENTRY TRAINING COURSE & WOOD HANDBOOK The names of the.pdf (Adobe Acrobat) files containing subcourses/manuals on this CD can be found in the Table of Contents (which also contains the links to detailed
More informationProduct description NCC Data Center
Product description NCC Data Center Concept General As one of the largest actors in the Nordic construction industry, NCC Construction plays a leading role in shaping the future of our society. After building
More informationSTATE OF MINNESOTA. BIM GUIDELINE State of Minnesota s Facilities Administration Data Capture Plan
STATE OF MINNESOTA BIM GUIDELINE State of Minnesota s Facilities Administration Data Capture Plan January 2014 TABLE OF CONTENTS GENERAL INFORMATION BUILDING INFORMATION MODELING (BIM)... 1 PURPOSE OF
More informationAcoustical Design for Concert Hall in the Science and Art Centre of Xiamen University
Acoustical Design for Concert Hall in the Science and Art Centre of Xiamen University Yuezhe Zhao, Shuoxian Wu State Key Laboratory of Subtropical Building Sciences, South China University of Technology,
More informationKey features. Good architecture deserves Daylight Visualizer. Any project, any scale. Photo-realistic and false colour images
Daylight Visualizer Good architecture deserves Daylight Visualizer Key features VELUX Daylight Visualizer is a professional simulation tool for the analysis of daylight conditions in buildings. It is intended
More informationDesign without compromise. Autodesk Revit. Architecture
Design without compromise. Autodesk Revit Architecture Definitive Design From conception to construction documentation, design projects within an intuitive environment. Building information modeling and
More informationFacility Summary. Facility Condition Summary. Seattle School District David T. Denny International Infrastructure. Facility Components
Infrastructure Facility Condition Summary Weighted Avg Condition Score Facility Components Systems Surveyor/ Date Done Comments G Sitework.9 Site Improvements Parking Pedestrian Paving Site Development
More informationHexagon Ventures offers the next generation of smart solutions for business verticals.
1 2 Hexagon Geosystems offers products and services from leading brands such as Leica Geosystems. solutions are trusted worldwide to capture, analyse, and present spatial information. Hexagon Geospatial
More informationGRAPHISOFT ArchiCAD and COBie2. How to Prepare your ArchiCAD 17 Project for COBie2 Documentation
GRAPHISOFT ArchiCAD and COBie2 How to Prepare your ArchiCAD 17 Project for COBie2 Documentation GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability
More informationAC 2011-96: IMPLEMENTING BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING CURRICULA
AC 2011-96: IMPLEMENTING BUILDING INFORMATION MODELING IN CONSTRUCTION ENGINEERING CURRICULA Don Chen, University of North Carolina, Charlotte Professional Preparation Iowa State University, Ames, Iowa
More informationTurner Innovation Series BIM Conference Istanbul May 2012. Brian Krause, Dan Gramer, Turner Construction Company
1 Why BIM? Excessive Re-Work and Waste TURNER INNOVATION SERIES May 2012 BIM for Design, Preconstruction, & Construction Brian Krause Manager, Integrated Building Solutions bkrause@tcco.com Value Value
More informationDIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS
DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 MINORITY AND WOMEN S BUSINESS ENTERPRISE PARTICIPATION
More informationExhibit C: Scope of Work and Schedule of Deliverables
Exhibit C: Scope of Work and Schedule of Deliverables Project Scope of Work Phases: A City Hall Envelope Renovations B City Hall Skylight Replacement C City Hall Chiller Replacement D City Hall Annex Plaza
More informationBUILDING INFORMATION MODELLING. The Designer. CIC East and IDBE. David Hymas
BUILDING INFORMATION MODELLING The Designer CIC East and IDBE David Hymas David Hymas Technical Director - BNI Building Services Engineer Building Services BIM Champion for MM Mott MacDonald 4 Years 18
More informationDesign Development Quality Management Phase Checklist Project Phase Checklist Series
Best Practices Design Checklist Project Phase Checklist Series Contributed by Micheal J. Lough, AIA, Principal, Integral Consulting The AIA collects and disseminates Best Practices as a service to AIA
More informationSEMI-AUTOMATIC GENERATION OF AS-BUILT BIM FAÇADE GEOMETRY FROM LASER AND IMAGE DATA
www.itcon.org - Journal of Information Technology in Construction - ISSN 1874-4753 SEMI-AUTOMATIC GENERATION OF AS-BUILT BIM FAÇADE GEOMETRY FROM LASER AND IMAGE DATA SUBMITTED: July 2013 REVISED: January
More informationTHE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION
THE PROVISIONAL CENTRAL PRODUCT CLASSIFICATION GROUP 867 ARCHITECTURAL, ENGINEERING AND OTHER TECHNICAL SERVICES Excerpt from CPCprov-en-Publication.doc - United Nation Statistic Division Group Class Subclass
More informationBIM and DWF REVIT BUILDING INFORMATION MODELING. About DWF. BIM and DWF
REVIT BUILDING INFORMATION MODELING BIM and DWF This white paper explores how DWF technology extends the building information modeling (BIM) design process and facilitates the sharing of the consistent,
More informationLindsay Thurber Comprehensive High School Red Deer School District No. 104 School Facilities Evaluation Project Page 1
School Facilities Evaluation Project Page 1 Executive Summary In November 1999, Alberta Infrastructure, School Facilities Branch engaged Stephens Kozak Carr and Brown Architects to conduct evaluations
More informationVIA University College Horsens, Denmark 14.05.12. Bachelor of Architectural Technology and Construction Management
VIA University College Horsens, Denmark 14.05.12 Bachelor of Architectural Technology and Construction Management 7 th semester dissertation BIM and FMS An approach for linking a Building Information Model
More informationArchitectural and Engineering Basic Services Fee Estimating Guidelines
Architectural and Engineering Basic Services Fee Estimating Guidelines Basic Services is the design work customary on a typical project to take an established building program, site, and budget, and then
More informationBIM and Lean Construction Can BIM remove waste from construction processes?
Tekla European BIM Forum 2014 BIM and Lean Construction Can BIM remove waste from construction processes? Assoc. Professor Rafael Sacks What is Lean Construction? Waste in construction? Lean and BIM Synergies
More informationTable of Contents. I Introduction 2. II Definitions & Area Calculation 2. III Room Numbering 7. IV Appendix A 9
Table of Contents I Introduction 2 II Definitions & Area Calculation 2 III Room Numbering 7 IV Appendix A 9 I. Introduction A. Purposes The purposes of this document are to: B. Benefits 1. Clarify and
More informationUsing the Autodesk Revit GSA Spatial Template
Autodesk Revit Template for the U.S. General Services Administration Using the Autodesk Revit GSA Spatial Template This document helps you to get started in using the GSA Spatial Template Revit file in
More informationThe Royal London Hospital Our BIM approach for the new building
The Royal London Hospital Our BIM approach for the new building Existing Hospital North Tower Central Tower Stepney Way South Tower New Pathology & Pharmacy Site Progress: February 2007 INTRODUCTION When
More informationVisual Asset Management: An owner s perspective on data driven. Asset Lifecycle Management
CFI, a Newmark Grubb Knight Frank company Visual Asset Management: An owner s perspective on data driven ` Asset Lifecycle Management A snapshot from NYP s journey to leverage Space and Asset Information,
More informationProposal for a Virtual 3D World Map
Proposal for a Virtual 3D World Map Kostas Terzidis University of California at Los Angeles School of Arts and Architecture Los Angeles CA 90095-1467 ABSTRACT The development of a VRML scheme of a 3D world
More informationDRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS
DRAFT BUILDING INFORMATION MODELING SCOPE OF SERVICES AND REQUIREMENTS FOR ARCHITECTS AND ENGINEERS Table of Contents 1 Introduction...3 1.1. Statement of Purpose...3 1.2. BIM Competence and Responsibilities...3
More informationTD AMERITRADE Park Omaha
TD AMERITRADE Park Omaha November 19, 2009 Report No. 6 MONTHLY CONSTRUCTION PROGRESS REPORT METROPOLITAN ENTERTAINMENT & CONVENTION AUTHORITY MONTHLY CONSTRUCTION PROGRESS REPORT Metropolitan Entertainment
More informationAnalysis II Façade Redesign: Architectural Precast Panels
Analysis II Façade Redesign: Architectural Precast Panels Analysis II Façade Redesign: Architectural Precast Panels Overview: This analysis covers the comparison of the current EIFS façade and my proposed
More information3D Laser Scanning For Digital Modeling & Documentation
3D Laser Scanning For Digital Modeling & Documentation Company Profile Direct Dimensions is dedicated to tackling the most difficult challenges with the most advanced 3D technologies available. Direct
More informationGoogle Earth Connections for ArchiCAD 15. Product Manual
Google Earth Connections for ArchiCAD 15 Product Manual GRAPHISOFT Visit the GRAPHISOFT website at http://www.graphisoft.com for local distributor and product availability information. Google Earth Connections
More informationConstruction layout and scanning solutions for the MEP contractor
Middle East Construction layout and scanning solutions for the MEP contractor Trimble Field Solutions Trimble Robotic Total Stations and 3D scanners allow you to both layout your MEP services as designed,
More information