PENANG FREIGHT FORWARDERS ASSOCIATION ********************************************************* Warehouse Safety
|
|
|
- Silvia Reed
- 7 years ago
- Views:
Transcription
1 PENANG FREIGHT FORWARDERS ASSOCIATION Persatuan Wakil-Wakil Penghantaran Kargo Pulau Pinang (PSMB Registered Training Centre) ********************************************************* Warehouse Safety ************************************************** Date: 26 & 27 July 2012 Venue: PFFA Training Centre,Batu Maung (HRDF- SBL CLAIMABLE) Introduction With increased warehousing activities, there is also an increase in Warehouse accidents. Accidents which occur in the warehouse are due to both Unsafe Conditions and Unsafe Act. This training is designed to provide the participants with knowledge in preventing accidents and incidents and also create awareness on Behavioral Safety.
2 Benefits of attending the course Understand the regulations that cover Warehouse Safety. Understand the Requirements of an Employer and an Employee in a warehouse to ensure the Safe operation of the Warehouse. Understand Forklift & Reach Truck Safety. Understand Loading and Unloading Safety. Understand Racking Safety. Understand Warehouse General Safety. Target Participants Warehouse Employees,OSH MR / Safety Committee / Warehouse Managers & Supervisors / Duration 2 Day course (9.00am 5.00pm) Methodology Class Room / Practical Pre-Course Assessment Notes/Workshop/ Videos Practical Post Course Assessment Course Contents v Legal for Warehouse v Occupational Safety & Health Act 1994 Employer Responsibility Part IV Section 15 Employee Responsibility Part VI Section 24 v Factories and Machinery (Safety, Health and Welfare) Regulations v OHSAS Clause (Operational Control) Loading / Unloading from Containers/Trailers; Parking Truck / Loading Bay Chocking the Wheels
3 Opening the Door & securing Docking / Latching Moving Load from Container Secure Load Unloading Area & Route to Unloading Area v Unpacking/ Packing Pallet Tools / PPE Remove or bend nails and staples Handling Tools v Storage Racking Rack Capacity End Stop Bar Rack Spacing (Passage Way) Rack protection Guard Stacking Sprinklers Head Overhanging materials Stacking by hand Rack Inspection v Manual Handling Ergonomic Lifting Stacking Ladder Safety Buddy System, v Forklift Safety Rules / Inspection Loading / Unloading from Rack Lifting Workers Refueling/Charging v Housekeeping Demarcation Different track for Truck and pedestrians v Storage of Hazardous Substance Away from main building / roofed / Well ventilated Secondary Containment / Containment Pit Separate Storage for reactive material
4 v Emergency Situation Fire Safety Fire Fighting Equipment & ERT Training Chemical Spillage Spillage Control Kit / Training v Electrical Safety Charging Area / Additional MCB TRAINERS PROFILE R. Anbalagan V. Ramasamy holds a Bachelor of Science in Electrical and Electronics Engineering,Executive Diploma in Quality Management System and a full certificate in Electronics from City &Guilds, a Certified Safety Officer (JKKP IS 127/438/2/4358) and a certified Lead Assessor in ISO14001:2004 and OHSAS18001:2007. His Career has taken him across well-known American MNC, Semiconductor and Sub-con companies. His working career of 25years has taken him from hands on practitioner to Middle Management and Head of EHS Department. His career success includes setting up and facilitating TPM Team, Championing Cost saving projects, Leading Preventive Maintenance Team in setting up Preventive and Predictive Maintenance System. Set-up the system for ISO14001:2004, OHSAS18001:2007 for Semiconductor, Fabrication and Full recovery facilities. He has many years of experience in conducting Audits in Technical subjects, Environmental, Health and Safety related trainings such as EHS Awareness Training, Total Predictive and Preventive Maintenance Training, Chemical Spillage Training,. Emergency Response Planning, Fire Fighting Training, Safe Operation of Forklift and RoHS Training. Just to name some of the companies Mr Anba has conducted Audits and Training, Oriental Fastech Manufacturing, Jabil Penang, AIC Semiconductor, Maestro Swiss, Fujisash, Minebea Electrical Motor, Polyplas, Massive Paper Products,DENKOIPC and many more.
5 ADMINISTRATIVE DETAILS Professional Fee and Training Material: PFFA Members: RM for 2 Days Non Members: RM for 2 Days Duration: 2 days Time: 9.00am 5.00pm Date: 26 & 27 July 2012 Venue: PFFA TRAINING CENTRE, Lintang Batu Maung 1,BATU MAUNG, PENANG Payment: Payment by cheques should be made payable to: Penang Freight Forwarders Association Contact Person: Ragupathy Tel: Fax:
CERTIFICATE IN OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT
SBL Scheme CERTIFICATE IN OCCUPATIONAL SAFETY AND HEALTH MANAGEMENT The MEF Academy Certificate Program in Occupational Safety and Health (OSH) Management is designed to provide practical knowledge and
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
Injury Prevention for the Transportation and Warehouse Industry
Injury Prevention for the Workers in the transportation and warehousing industry encounter a variety of hazards, some of which are potentially fatal. This fact sheet: Increases awareness of the primary
Monthly Warehouse Inspection Checklist
Monthly Warehouse Inspection Checklist This timetable will assist you in the timely completion of various protocols in order to obtain certification. Specific Warehouse Inspections 3 PROTOCOL DESCRIPTION
Drew University Powered Industrial Truck Program Policy Draft 04/12
PURPOSE To establish procedures and guidelines to ensure that all powered industrial trucks (PITs) are maintained and operated in a safe manner and that only approved PITs are operated by trained and authorized
Required Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for General Industry Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
tips How smallchangescan saveyou big, &
warehousesafety tips How smallchangescan saveyou big preventaccidentsreduceinjuries, & increaseproductivity.. Table of Contents Welcome Statement...4 Safety Policy Statement...5 Guiding Principles...6
INSTITUT KESELAMATAN DAN KESIHATAN PEKERJAAN NEGARA
INSTITUT KESELAMATAN DAN KESIHATAN PEKERJAAN NEGARA NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH KURIKULUM KURSUS COURSE CURRICULUM TEL : 03 8769 2100 FAX : 03 8926 2900 URL : www.niosh.com.my
LOSS PREVENTION IAT GROUP
LOSS PREVENTION IAT GROUP CARGO SECURITY AND LOSS PREVENTION Introduction Cargo protection requires thorough planning to be effective and remain effective through changing conditions. Cargo security is
Contractor Safety Management
1.0 Introduction Memorial University will ensure that a diligent contractor management process is established. This procedure establishes requirements for contract administration and oversight of contractor
Company Name Company Address Company Phone Number Company Fax Number
Job Hazard Analysis Plumbing Company Name Company Address Company Phone Number Company Fax Number Job/Task Plumbing fixture and piping Date Prepared: 08.04.2010 installation Project Name: Project Name
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit OSHA Plant Safety Audit Checklist: Self-Inspection Types of Hazards Addressing the Hazards in Your Work Area Safety and
Powered Industrial Truck Safety Program
Powered Industrial Truck Safety Program TABLE OF CONTENTS Forklift Safety Program 1.0 Overview... 3 2.0 Policy.....3 3.0 Requirements 3 4.0 Purpose. 3 5.0 Scope......4 6.0 Forklift Procedures 4 6.0 Responsibilities.....6
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
HEALTH AND SAFETY TRAINING COURSES
HEALTH AND SAFETY TRAINING COURSES DON T DICE WITH HSE REGULATIONS www.britishprint.com ACCIDENTS HAPPEN! PROTECT YOURSELF, YOUR EMPLOYEES AND YOUR CLIENTS As an employer you have a duty of care to ensure
Example risk assessment for cold storage warehousing
Example risk assessment for cold storage warehousing Setting the scene Frozen Foods Ltd provide cold storage and distribution facilities (at temperatures between -18 and -30 C) at three locations. They
Example risk assessment for a warehouse
Example risk assessment for a warehouse Setting the scene The warehouse manager carried out a risk assessment of the warehouse. The warehouse employed 12 staff, some were part of a union. How was the risk
Tool Box Talk. Forklift Operations
Tool Box Talk Forklift Operations Treat them with respect 40k for H40, 62k for H70 Mercedes CL, Jaguar Daimler or XKR, Porsche Carrera 4S 40k, same price as H40 treat them the same! 62k, same price as
Hazard Management Tool
Hazard Management Tool Developed by the Workplace Safety and Insurance Board in collaboration with the Health and Safety Ontario members: Infrastructure Health and Safety Association Public Services Health
Institution of Occupational Safety & Health Managing Safely Course
Institution of Occupational Safety & Health Managing Safely Course Duration of Course: 4 Days Registration Fee: 10,000 Total Course Fee: 40,000 Course Date: May 26-29, 2014 Venue: Islamabad Embassy Road
Slide Set of Jobs Involved in Various Manual Materials Handling (MMH) Tasks: Brought to you by EASE!
Slide Set of Jobs Involved in Various Manual Materials Handling (MMH) Tasks: Brought to you by EASE! Many of the jobs in the following set of slides illustrate workers performing MMH that could be improved,
Temporary Worker Safety Checklist
Temporary Worker Safety Checklist The following checklists provide guidance for staffing agencies and employers that hire temporary workers regarding the steps each party should take to ensure it is meeting
Getting the occupational safety basics organised
Getting the occupational safety basics organised 10 important measures Introduction Occupational health and safety are the foundation of wellbeing at work. The employer is responsible for providing safe
BUSINESS PROFILE 2014
HEAD OFFICE: WITBANK corner OR Tambo & Beatrix St, Witbank Tel (013) 656 1584 Fax (086) 602 7429 Email: talitha@ohsacademy.co.za Reg. No: 2008/001078/07 GAUTENG, JOHANNESBURG & PRETORIA: 811 Lisbon Street,
Warehousing and storage Keep it safe
Warehousing and storage Keep it safe This short guide is to help those involved in warehousing and storage to reduce the number of injuries and cases of occupational ill health. It contains simple advice
SAFETY SELF-INSPECTION PROGRAM
Palm Beach State College Florida s First Public Community College SAFETY SELF-INSPECTION PROGRAM PALM BEACH STATE COLLEGE SAFETY SELF-INSPECTION PROGRAM 1. INTRODUCTION An important element of any employee
Introduction to Kowloon Bay Logistics warehouse
COHESION Freight (HK) Ltd. Introduction to Kowloon Bay Logistics warehouse Dated : February 25, 2013 NVO Kowloon Bay Airfreight and Logistics Warehouse Logistics Centre Portfolio Currently expanded facility
E3902 Seeing Accidents Before They Happen Leader s Guide
E3902 Seeing Accidents Before They Happen Leader s Guide ERI PRODUCTIONS INC. SEEING ACCIDENTS BEFORE THEY HAPPEN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
SAFETY AND ENVIRONMENTAL INFORMATION FOR EXTERNAL COMPANIES. Koehler Kehl
1. Delivery, Notice, Signature After receiving the following information sheets, the team leader from every external company is required to read through them, explain them to their employees, and after
WCF S CUSTOMER SEMINARS
WCF S CUSTOMER SEMINARS WCF customer seminars offer up-to-date information for best practices in safety and claims management to help you preserve your company s bottom line. Classes are free to WCF policyholders.
Sample New Employee Safety Checklist
Sample New Employee Safety Checklist Supervisors must review the appropriate items from this list with each new employee. The Washington State Industrial Health and Safety Act (WAC 296-24-040) requires
J.J. Keller Safety Materials
J.J. Keller Safety Materials Using safety talks will allow your employees to analyze Real Life Stories and share what they feel the individuals did right and wrong, and what should happen next. Safety
Savard Labor & Marine Staffing, Inc. Forklift & Motorized Pallet Jack Safety Program Rev3/14
Forklift & Motorized Pallet Jack Safety Program Purpose Material handling is a significant safety concern. During the movement of products and materials there are numerous opportunities for personal injury
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF)
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF) Technical Guideline Audit and Inspection Version 2.0 February 2012 Table of Contents 1. Introduction... 3 2. Definitions... 3 3. Internal Audit... 3 3.1
EMERGENCY PREPAREDNESS & RESPONSE PROCEDURE
1 of 12 DOCUMENT REVISION HISTORY Revision No. Date DESCRIPTION OF CHANGES Pages Affected By 00 01/07/2003 Draft Issued For Comment All HSEQ Dept. 01 01/09/2003 Total Change First Approved Issue All HSEQ
Career Paths in Safety
Career Paths in Safety The primary focus of safety practice is to prevent incidents and accidents that may lead to injuries, illnesses, damage to property and equipment, or harm to the environment. Many
IN-DEPTH OPERATIONAL SECURITY KNOW HOW 5 DAYS TRAINING PROGRAM DELIVERED BY ASIS CERTIFIED PROTECTION PROFESSIONAL (CPP) SUPPORTING PARTNER:
IN-DEPTH OPERATIONAL SECURITY KNOW HOW 5 DAYS TRAINING PROGRAM DELIVERED BY ASIS CERTIFIED PROTECTION PROFESSIONAL (CPP) SUPPORTING PARTNER: In- Depth Operational Security Know How 5 Day Course Location:
Safety and Environmental Information for External Companies Koehler Oberkirch
and al and at Work 1. Delivery, Notice, Signature After receiving the following information sheets, the team leader from every external company is required to read through them, explain them to their employees,
Hazard/Risk Identification and Control Procedure
Hazard/Risk Identification and Control Procedure Introduction Hazard identification and the steps taken to minimize the risks associated with identified hazards are a critical component of working safely.
You ve. life. ahead. you... So, safe. the of. job!
You ve So, got your play whole it safe life on ahead the of job! you... So, play it safe on the job! Getting a job anytime soon? Money isn t the only thing to think about. If you re under 18 and thinking
Mobile Equipment Safety
Mobile Equipment Safety PLANNING THE JOB Hazard Assessment DO YOU HAVE THE RIGHT EQUIPMENT? ARE THERE HAZARDS TO BE AVOIDED? IS THE GROUND AREA STRONG ENOUGH TO SUPPORT THE EQUIPMENT? ARE THERE ANY UNUSUAL
Safety and Environmental Information for External Companies
1. Delivery, Notice, Signature After receiving the following information sheets, the team leader from every external company is required to read through them, explain them to their employees, and after
Workplace Injury & Illness Prevention Program
Workplace Injury & Illness Prevention Program ID Analytics Inc. For non-high hazard employers RESPONSIBILITY The Injury and Illness Prevention (IIP) Program administrator is Janet Wickens, Director Human
Guide on Manual Handling Risk Management in. Transport and Storage
Guide on Manual Handling Risk Management in Transport and Storage Our vision: A country where worker safety, health and welfare and the safe management of chemicals are central to successful enterprise
WASTE Application Form - Dublin Waste to Energy SECTION J ACCIDENT PREVENTION & EMERGENCY RESPONSE
SECTION J ACCIDENT PREVENTION & EMERGENCY RESPONSE Describe the existing or proposed measures, including emergency procedures, to minimise the impact on the environment of an accidental emission or spillage.
CLASSES & SERVICES OFFERED
CLASSES & SERVICES OFFERED Please contact us for information regarding any items in the listing below: Course content Hiring U.S.S. as your Company s Safety Director U.S.S. as your Company's litigator
Occupational Health and Safety Officer
Occupational Health and Safety Officer APPLY TODAY participants at NO COST as a commitment to skills development in Northern BC. To determine your eligibility call Rob Bryce at 250-960-5982. ABOUT UNBC
Forklifts, Battery Charging and Material Handling
Forklifts, Battery Charging and Material Handling 1. Identification of Workplace Hazard Forklift operations are relatively hazardous activities and, in relatively low-hazard commercial workplaces, may
Accident, Injury & Illness Program Training
CITY OF PHILADELPHIA RISK MANAGEMENT DIVISION Safety Directive #A-8 Revision #1 Title: Accident, Injury & Illness Program Training Purpose Training is one of the most important elements of any safety &
Safety and Environmental Information for External Companies
Health and and al Health and at 1. Delivery, Notice, Signature After receiving the following information sheets, the assembly leader from every external company is required to read through them, explain
City of Belmont Contractor Induction Program
City of Belmont Contractor Induction Program Page 1 of 17 14 March 2011 Source: OSH Date: 13/12/2013 City of Belmont Contractor Induction Program Table of Contents TABLE OF CONTENTS... 1 INTRODUCTION...
42/Trucking and Warehousing 206
SIC/Industry 2001 Indemnity Claims TRANSPORTATION and PUBLIC UTILITIES 42/Trucking and Warehousing 206 Analysis This industry group includes businesses furnishing local or longdistance trucking or transfer
OSHA Training Institute Education Centers Course Descriptions
U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration (OSHA) OSHA Training Institute Education Centers Course Descriptions www.oshamidatlantic.org 800-875-4770 U. S. D E P A R T M E N
Materials Handling Safety Talks
How to Stack and Store Materials Safely Materials Handling Safety Talks WHAT S AT STAKE There s hardly a workplace that doesn t handle or store materials. Whether your company has a large warehouse or
WHS Induction Series. 36 Toolbox Talks. Contents
36 Toolbox Talks 3-5 minute toolbox talks for induction or refresher safety training. Having regular training programs that educate your workers about workplace issues has never been easier than now with
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
Contents. Before you begin. Introduction: Organise dispatch operations 1. Element 1: Planning and organising dispatch operations 3
Contents Contents Before you begin v Introduction: Organise dispatch operations 1 Element 1: Planning and organising dispatch operations 3 Section 1.1: Analysing stock 4 Section 1.2: Identifying resources
Five Star Occupational Health and Safety Audit Specification document 2013
Five Star Occupational Health and Safety Audit Specification document 2013 www.britsafe.org Membership Training Audit and Consultancy Policy and Opinion Awards Contents 1 Introduction to the Five Star
Revised Scheme of Service for Occupational Health and Safety Personnel
REPUBLIC OF KENYA Revised Scheme of Service for Personnel February, 2007 ISSUED BY THE PERMANENT SECRETARY, MINISTRY OF STATE FOR PUBLIC SERVICE OFFICE OF THE PRESIDENT NAIROBI REVISED SCHEME OF SERVICE
School of Engineering University of Glasgow
School of Engineering University of Glasgow Electronics Workshops Rankine Building 319A (2 Technicians) 510 (1 Technician) 712A (4 Technicians, 1 Modern Apprentice) James Watt South 619 (2 Technicians)
The Royal Environmental Health Institute of Scotland
The Royal Environmental Health Institute of Scotland Introduction to Health and Safety Course Syllabus Minimum teaching time 3 hours The Royal Environmental Health Institute of Scotland is a registered
Guiding employers through workers compensation. n Was there when it happened. n Is accountable for the people and equipment.
Guiding employers through workers compensation Preventing injuries Minnesota Iowa Nebraska South Dakota Wisconsin Accident Analysis Learn from accidents so you can prevent them from happening again George,
PROJECT MANAGEMENT PROFESSIONAL PMP EXAM PREPARATION
HRDF CLAIMABLE MY PROCERT PROGRAM PROJECT MANAGEMENT PROFESSIONAL PMP EXAM PREPARATION Course Dates:- Session 1: 13 th - 14 th Sept & 20 th - 21 st Sept 2014 Session 2: 11 th - 12 th Octr & 18 th - 19
SCC CONTRACTOR ORIENTATION CHECKLIST
SCC CONTRACTOR ORIENTATION CHECKLIST Give a copy of the Contractor Health and Safety Guideline to the contractors Remind contractors to read through the guideline and educate their staff / subcontractors
Caring Leadership Changing a safety culture 2014 PPSA Safety and Health Conference. Mike Hignett Wakefield, Ma. Corrugated Facility-RockTenn
Caring Leadership Changing a safety culture 2014 PPSA Safety and Health Conference Mike Hignett Wakefield, Ma. Corrugated Facility-RockTenn Old school: < 10 recordables was considered good From 2002 to
SITE CONTRACTOR PROCEDURES
SITE CONTRACTOR PROCEDURES Asset Collection Type B Assets are considered High risk ; the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment
RESIDENTIAL ROOF TRUSS INSTALLATION PROCEDURES
RESIDENTIAL ROOF TRUSS INSTALLATION PROCEDURES Construction Safety Association of Ontario, October 2008 Prepared for the Low-Rise Residential Trade Labour-Management Health and Safety Committee CONTENTS
WORK HEALTH AND SAFETY PUBLIC COURSES 2015 COURSE DATES AND FEES
PO Box 1774, Oxenford, Queensland 4210 Telephone: (07) 5573 6199 Fax: (07) 5580 6366 Email: information@drasafety.com.au WORK HEALTH AND SAFETY PUBLIC COURSES 2015 COURSE DATES AND FEES WHSA (5 days):
WELDING & CUTTING. Course Description:
WELDING & CUTTING This course attempts to discuss the two most common types of welding and cutting (gas and arc), the danger that are involved in working with them and the safety measure that can be undertaken
Guidance Note. Plant and Machinery. Relevant legislation. What is the legal definition of a pallet? A pallet is defined in BS ISO 445 as follows:
Pallet safety Guidance Note PM15 (Fourth edition) Plant and Machinery Guidance Note Guidance Notes are published under five subject headings: General (GS) Medical (MS) Environmental Hygiene (EH) Chemical
SAMPLE using TEMPLATE 1
SAMPLE using TEMPLATE 1 Title: 8.1 Inspections by Managers 8.2 Inspections by JHSC or HS Representative 8.3 Operator Pre-Use Inspections Approved by: John Idnc Location: all facilities and equipment Date
Loss Control TIPS Technical Information Paper Series
Loss Control TIPS Technical Information Paper Series Innovative Safety and Health Solutions SM The Safety Audit: A Management Tool A major soft drink bottler, concerned about ergonomics and lifting hazards,
FREQUENTLY ASKED QUESTIONS ABOUT POWERED INDUSTRIAL TRUCK OPERATOR TRAINING
FREQUENTLY ASKED QUESTIONS ABOUT POWERED INDUSTRIAL TRUCK OPERATOR TRAINING The powered industrial truck operator training requirements apply to all industries where trucks are being used, except agricultural
Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF)
www.highfieldabc.com Qualification Specification HABC Level 1 Award in Principles of Health and Safety in the Workplace (QCF) Qualification Number: 600/6789/5 Highfield House Heavens Walk Lakeside Doncaster
OCCUPATIONAL STANDARD (For use in the development of supply chain related job descriptions, performance evaluations, career development plans, etc.
OCCUPATIONAL STANDARD (For use in the development of supply chain related job descriptions, performance evaluations, career development plans, etc.) Description of Position (As defined by the CSCSC Stakeholder
S/N MOM Accredited Courses Relevancy Reference
1 2 3 4 5 6 7 8 9 Safety Orientation (Tunnelling) for Workers Compressed Air Works (Man Lock Attendant) Compressed Air Works (Medical Lock Attendant) Building Construction Supervisors Safety Building Construction
Safety Systems Review Facilities Management Guidance and specification Version 1 2014
Safety Systems Review Facilities Management Guidance and specification Version 1 2014 Membership Training Qualifications Audit and Consultancy Policy and Opinion Awards Contents Page Safety Systems Review
Forklift Carts and Dollies
Forklift Carts and Dollies AgSafe Safe Work Procedure PACKAGING/SHIPPING AREA Accident Prevention Tips All employees should be instructed in PROPER LIFTING TECHNIQUES. Consider the ergonomics of each situation
Health and Safety Worker Training
Health and Safety Worker Training Wellington Health Care Alliance June 2014 To be the Workplace of Choice Our Hospitals are committed to a safe, healthy and respectful workplace 2 Occupational Health and
New Hire and Temporary Employee Safety Orientation
2013 New Hire and Temporary Employee Safety Orientation Jenna Arkin Earth Friendly Products Northwestern Division 9/4/2013 NAME: Date: New Hire and Temporary Employee Safety Orientation Trainees are to
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses Table of Contents OSHA 500 - Trainer Course in OSHA Standards for Construction...2 OSHA 501 - Trainer Course
Building and Construction
Checklist for enterprises to use in their workplace assessment Building and Construction Introduction This checklist is a tool for enterprises to use when preparing their workplace assessment (WPA). All
J. J. KELLER S 5-MINUTE WORKPLACE SAFETY TALKS
Acrylonitrile Air Contaminants How Much Is Too Much? Air Contaminants Standard Alcohol- and Drug-Free Workplace Anhydrous Ammonia Refrigeration Units Asbestos Automated External Defibrillators (AEDs) Behavior-Based
Injury or accident report
Injury or accident report Fill out all fields. Be as specific as possible and include drawings, photos and additional narrative as needed. Facility/location: Incident type: Injury Incident Equipment/property
This program is listed as a mandatory inspection item on the MnOSHA Investigation Checklist, Item 7D.
Standard: Summary: Coverage: Workplace Accident and Injury Reduction Program RESOLUTION NO# 0809-88 Minnesota Statutes 182.653, A Workplace Accident and Injury Reduction Program Minnesota Rules 5205.1500,
Workshop Self Inspection Checklist WORK01
Workshop Self Inspection Checklist WORK01 General Mechanical Workshops Location Assessor Date This core checklist is provided by the Health and Safety Department as a template, which provides a basic framework
Participate in OHS processes
Student Information Course Name Course code Contact details Partial completion of one of these qualification Description of this unit against the qualification Descriptor What is covered in the course
A 5 STEP GUIDE. for employers, workers and their representatives on conducting workplace risk assessments. International Labour.
A 5 STEP GUIDE for employers, workers and their representatives on conducting workplace risk assessments International Labour Office Geneva A 5 STEP GUIDE for employers, workers and their representatives
Health & Safety at Work
Ministry of Labour Worker Health & Safety at Work Prevention Starts Here Worker Health and Safety Awareness in 4 Steps This workbook belongs to: Contents 01 INTRODUCTION 03 STEP 1: GET ON BOARD 03 Everyone
Elements of an Occupational Health and Safety Program
Occupational Health and Safety Division Elements of an Occupational Health and Safety Program Table of Contents Introduction 3 What workplaces must have a program? 5 What criteria must the program meet?
Conducting a Job Hazard Assessment. Environmental, Health and Safety 275-3241
Conducting a Job Hazard Assessment Environmental, Health and Safety 275-3241 EH&S Programs: Fire Safety Blood Borne Pathogens Hazard Communication Personal Protective Equipment Emergency Preparedness General
OSHA Regulations 29 CFR 1910.178(I) Powered Industrial Trucks. Mushroom Generic (I) (Sample) Program
OSHA Regulations 29 CFR 1910.178(I) Powered Industrial Trucks Mushroom Generic (I) (Sample) Program March 2012 The following are explanations and instructions on what you need to do to be in compliance
Ir. NOORAZMAN BIN SOUD. Deputy Director Petroleum Safety Division
Ir. NOORAZMAN BIN SOUD Deputy Director Petroleum Safety Division 1 OUTLINES Introduction of DOSH Classification of CIMAH 1996 What is ERP? Objectives of ERP Why need ERP? Types of ERP Onsite ERP Components
Section 14. Forklift Safety Contents 14.1 Operator Safety
Section 14. Forklift Safety Contents 14.1 Operator Safety... 14-1 14.2 Inspection and Maintenance... 14-2 14.3 Handling the Load... 14-3 14.4 Fueling Liquefied Petroleum (LP) Gas Forklifts... 14-3 14.5
Risk Management Department Safety & Worker s Compensation Training Classes
Risk Management Department Safety & Worker s Compensation Training Classes The following safety and worker s compensation training is available from Risk Management and is scheduled by contacting the Risk
CHAGUARAMAS TERMINALS LTD.
POLICY MANUAL All rights reserved to CrewsInn Limited. No part of this document may be reproduced in any form or by any means, without permission in writing from the company CHAGUARAMAS TERMINALS LTD.
Six steps to Occupational Health and Safety
Six steps to Occupational Health and Safety This booklet gives basic guidelines for workplace health and safety systems to help industry in NSW comply with the "duty of care" principle outlined in the
Qualification Specification. Level 1 Award in Health and Safety for Catering
www.highfieldabc.com Qualification Specification Level 1 Award in Health and Safety for Catering Highfield House Heavens Walk Lakeside Doncaster South Yorkshire DN4 5HZ United Kingdom Tel +44 08452260350
OCCUPATIONAL HEALTH AND SAFETY Global Policy
OCCUPATIONAL HEALTH AND SAFETY Global Policy Each of us should behave in a manner that promotes a positive safety culture Our commitment Diageo is firmly committed to ensuring the occupational health,
INTRODUCTION TO LEAN SIX SIGMA
INTRODUCTION TO LEAN SIX SIGMA In collaboration with Accredited by International Association for Six Sigma Certification THE UNIVERSAL CERTIFICATION INTRODUCTION TO LEAN SIX SIGMA OBJECTIVES This course