ProMax PRE INSTALLATION INSTRUCTIONS AND DIMENSIONS

Transcription

1 ProMax PRE INSTALLATION INSTRUCTIONS AND DIMENSIONS Wall preparation: The pan or pan/ceph creates pull-out force of 1216 pounds. Wall bracket has 4 pre drilled holes, 16 and 12 on center. Either ones can be used. 16 If metal studs are in wall, use a mounting board to expand the load over several studs to meet the pull - out requirement. If needed, sandwich the wall on both sides YOU MUST USE EITHER 1. Top wall bracket and floor screws OR 2. Two wall brackets. Only one wall bracket is supplied with each system. If planning for 2 wall brackets, you must add part# to your order. INPUT / OUTPUT OUTLETS All outlets must be within 3ft from the back of the column and from the floor. 1. Power: 110V, 20A dedicated circuit. 2. Remote exposure switch (See page 6 for wiring diagram): 2 x4 electrical outlet boxes at ProMax and remote exposure switch location. ½ conduit between the 2"x4" electrical boxes required. All parts supplied for exposure switch connection. 3. Pan/ceph film units w/ Admark: 1½ conduit to the darkroom, 30ft. cable supplied. 4. ProMax Ethernet interface: Standard Ethernet RJ45 port to the network HUB/SWITCH. Version 17 Page 1 of 7

2 ProMax Panoramic ½ 74 chinrest 60 ½ 95 ¾ Top limits can be set at the install site. 22 (9 ) Film 27 ½ Recommended operating dimensions (actual product dimensions in parenthesis) 64 (48 ) 42 (39 ) 22 (9 ) Digital 61 (42 ½ ) 39 (33 ½ ) 27 ½ 64 (49 ½ ) 37 rest position (entry1) Version 17 Page 2 of 7

3 Promax Film Ceph ½ 60 ½ 95 ¾ Top limits can be set at the install site 46 (44 ½ ) 42 (39 ) 27 ½ 37 rest position (entry1) ½ 67 ¾ ½ ear supports ½ 74 chinrest Recommended operating dimensio (actual product dimensions in parenthesis) 88 (83 ½ ) ns 64 (49 ½ ) Version 17 Page 3 of 7

4 ProMax Digital ceph 51 ¼ 86 ½ ½ ½ ear supports 38 ½ 74 chinrest 60 ½ 95 ¾ Top limits can be set at the install site Recommended operating dimensions (actual product dimensions in parenthesis) 85 (78 ) 46 (44 ½ ) 39 (33 ½ ) 27 ½ 64 (49 ½ ) 37 rest position (entry1) 30 Version 17 Page 4 of 7

5 Other install information: Each film based machine comes with one Autoprint Pan Cassette ( pan unit ) OR Standard Pan Cassette plus Ceph Cassette for Admark use ( pan/ceph unit ) Extra cassettes Standard panoramic, order number w/ Lanex screens: Autoprint panoramic, order number C ephalometric, order number Film recommended: pan: Agfa Dentus Ortholux 6 x12 ceph: Agfa Dentus Ortholux 8 x10 Bite sticks: Bite sticks are autoclavable E xtra bite s ticks,10-pak, order number T omo bite plates, 10-pak w/ 2 rods : order number nd wall bracket: order number (optional) Handheld exposure order number switch w/ wall mount (optional) Darkroom: Computer specs: for digital Light tight, GBX2 filter on safe light, 15W frosted maximum. No clos er than 48 from open film. 512 MB of RAM Win 2000, XP PCAnywhere connection in Imaging Station and Image server computers Hard drive: 2x 40GB for average size practice. Please consult with Planmeca certified computer provider for your computer needs. Requirements vary greatly based on usage. For more technical information, please contact Planmeca Customer Care (630) or visit Version 17 Page 5 of 7

6 Version 17 Page 6 of 7

7 Digital X-ray Imaging Hardware Diagrams and System Requirements for Planmeca Digital Panoramic and Dixi X-Ray Systems Planmeca Digital X-Ray (ProMax Shown) CPU Specifications Database Server Digital Image Workstation Specifications For Panoramic, Bitewing, Tomographic Pentium 4 or Higher and Cephalometric 2D images 2 Hard Drives, 160 GB each min. Pentium 4 or Higher 1 GB or more RAM 60 GB or better HD WINDOWS XP / Server 2003 OS / 2 GB or more RAM Vista (32 bit OS Only) WINDOWS XP / Server 2003 OS / Vista (32 bit OS Only) Ethernet 10/100 Mbit Ethernet 10/100 Mbit bit graphic card Server monitor 1024 x 768 res. min. Stores and archives all data High Speed Internet, DSL or better to MS SQL or SOLID. NOTE: The data server should have large hard drive disk space, Dimaxis is NOT compatible hardware redundancy and a with 64Bit OS Systems logical backup system. Image Acquisition Workstation (2D) Note: Dimaxis Software acquires the Panoramic, Tomographic and Cephalometric images (2D). Dimaxis Imaging Software is used to enhance, filter, measure, diagnose, archive and export the images. Note: If using Vista, only Vista Business or Vista Ultimate (32 bit) OS is required and requires Dimaxis 4.3.X or newer. If using Vista, only Vista Business or Vista Ultimate (32 bit) OS is required and requires Dimaxis 4.3.X or newer. CPU Specifications Additional Workstations For Panoramic, Tomographic and Cephalometric images Refer to Digital Image Acquisition Workstation (2D) Additional Workstation For Panoramic, Tomographic and Cephalometric images (2D) Dimaxis Software Dimaxis Imaging Software for 2D X-Ray Imaging Ethernet Ready The new, built-in Ethernet connection for Planmeca Digital X-rays offers direct network connectivity. You can literally plug the Ethernet connection directly into your network. Optional Crossover Local Area Network Connection Required for sharing printer or adding additional workstations. Note: An Uninterrupted Power Supply (UPS) is recommended for the X-Ray. Optional Printer P L A N M E C A X - R a y Im a g in g S y s t e m s