LTC 8900 Series Allegiant Matrix/Control Systems - Modular

Transcription

1 Video LTC Series Allegiant Matrix/Control Systems - Modular LTC Series Allegiant Matrix/Control Systems - Modular u u u u u Camera by monitor switching Modular construction Powerful alarm handling capabilities SalvoSwitching and SatelliteSwitch capability Includes Windows-based configuration software The LTC Series Allegiant Video Switcher/Control Systems are powerful full matrix switchers, capable of displaying video from any camera on any monitor, either manually or via independent automatic switching sequences. By using the LTC Series CPU and the LTC series PC, the standard system can be enhanced to include dual/redundant CPU/ Power supply with automatic hot-switchover capabilities. Functions General Construction The LTC Series provides versatile modular construction accommodating up to camera inputs, monitor outputs, keyboards, alarm points, and a computer interface port. The robust design utilizes a separate CPU bay with its own power supply. Dual/Redundant System For situations where complete system failure cannot be tolerated, we offer the dual redundant LTC CPU. This CPU unit incorporates a secondary CPU/ power supply. In the event of a primary CPU or power supply failure, the system switches over automatically to the backup CPU or power supply. The system uses an independent PC that continuously monitors the CPUs for failure and performs a hot-switchover if needed. You can also manually change CPUs using the preloaded software or via a front panel slide switch. Sequencing Capabilities These systems can be programmed with up to sequences, which can be run independently of each other in either a forward or reverse direction. Any of the sequences can utilize the SalvoSwitching capability, where any number of system monitors may be selected to switch as a group. Using the supplied software, sequences can automatically activate and deactivate based upon the day or the time of day. Camera Control The LTC Series support variable speed operation and full programming access for AutoDome and AutoDome Easy II Series cameras. In addition, on-site receiver/drivers are available to provide operator control of pan, tilt, zoom, pre-positions, auxiliaries,

2 LTC Series Allegiant Matrix/Control Systems - Modular auto-pan, and random scan functions when used with conventional pan/tilt devices. An integral local test function is also a standard feature. The LTC Series include an impressive user-based priority system and a series of programmable lockout tables to limit operator access of remotely controlled devices. Operators can restrict control from lower priority operators either manually or automatically. When enabled to operate automatically, a built-in timeout period is user programmable. Bilinx Capability When combined with an LTC Allegiant Bilinx Data Interface unit, these switcher/controllers support operations using Bilinx communication. With Bilinx, PTZ control is accomplished using a bidirectional communication protocol embedded in the video signal of Bosch Dinion, AutoDome, and AutoDome Easy II CCTV cameras. In addition, Bilinx uses the standard video cable to transmit alarm and status messages from the cameras, providing superior performance without the need for separate data transmission cables. Macro Capabilities The LTC system provides powerful macro capabilities. Macros can be activated using Allegiant Series system keyboards, timed event functions, and alarm activations. Alarm Capabilities The LTC / alarm interface unit allows external contact closure or logic level input to automatically display cameras on a monitor or group of monitors. The supplied PC software includes the ability to combine multiple alarm operating modes within the same system. Alarm video may be selected to reset either manually or automatically. In addition, one can customize a -character alarm titles to designate the specific alarm condition. System Operation System operation and programming is accomplished using a full-function, ergonomically designed keyboard. Up to keyboards may be used in the system. Builtin operator priority levels and the ability to restrict certain operators from controlling designated functions provide maximum flexibility. Programming/Software Capabilities The LTC Series includes a black outlined - character on-screen display for time/date, camera number, camera ID ( or characters), and monitor ( characters) or status information. A user selectable option provides the ability to display a third line of on-screen text. This third line can be configured to display up to additional camera title characters ( characters total) or a -character monitor title. The on-screen display is also user selectable to operate in "-digit Camera ID" mode. When enabled, - digit "site numbers" are displayed in addition to the - digit camera number. The -digit site number feature is especially useful when groups of cameras are located in separate buildings, floors, or other common areas. Over, characters covering a multitude of languages, (including several hundred Chinese symbols) are available to help program camera ID and monitor titles. Using the supplied PC software, enhanced programming and switching features can be obtained. A user friendly spreadsheet format allows one to easily enter/change camera titles, operator names, timed events (), system parameters, camera sequences, lockouts, and advanced alarm response programming. The software also provides the ability to enable an on-screen indicator for easy identification of controllable cameras. Another useful feature of the software is its ability to store or print (in real-time) programming information, system events, alarms, switching functions, sequence events, keyboard actions, and video loss information. Expansion Capabilities The LTC Series can serve as the Master or Slave Switcher in a SatelliteSwitch configuration. This innovative SatelliteSwitch feature enables a single LTC system to communicate with remotely located Satellite systems. Any Allegiant system can serve as a remote Satellite Switcher. This powerful feature permits the design of large distributed type systems. The main control site can view and control local cameras as well as cameras located at any of the remotely distributed Satellite sites. The Satellite sites can view and control only cameras associated with their local site. When used in this type of configuration, the main LTC system can access up to Satellite sites. Certifications and approvals Electromagnetic Compatibility (EMC) uct Safety Complies with FCC Part, ICES-, and CE regulations Complies with CE regulations, UL, CSA, EN, and IEC Standards

3 LTC Series Allegiant Matrix/Control Systems - Modular Installation/configuration notes LTC LTC PC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC Typical Diagram of LTC Series Redundant System Configuration ( Cameras by itors) Typical Diagram of LTC Series System Configuration ( Cameras by itors) Main CPU Bay Main CPU Bay LAN Data Lines LAN Data Lines LTC Cables LTC Cables Video Output Bay Video Output Bay Video Input Bay Video Input Bay Camera Camera itors itors Keyboards Keyboards PC User PC

4 LTC Series Allegiant Matrix/Control Systems - Modular LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC LTC - LTC - LTC LTC LTC - LTC LTC - LTC LTC LTC Typical Diagram of LTC Series Redundant System Configuration ( Cameras by itors) PC Running Configuration, Redundancy, and Data Mirroring Software Main CPU Bay Cameras Coax Ribbon Cables LAN Data Lines to all Bays To itors Up to System Keyboards (Using LTC and LTC Series Port Expanders) Up to System itors Video Panels LAN Switchers Typical Diagram of LTC Series Redundant System Configuration ( Cameras by itors) PC Running Configuration Software Main Power Supply Main CPU Module Backup CPU Module Backup Power Supply Cameras Video Panels Main CPU Bay LAN Switches Coax Ribbon Cables To itors Up to System itors UP to System Keyboards (Using LTC and LTC Series Port Expanders)

5 LTC Series Allegiant Matrix/Control Systems - Modular Allegiant Satellite Switching System itor Outputs Alarm Interface Unit Pan/Tilt/Zoom and Satellite Control Data Allegiant Main CPU Bay Alarm Inputs May Activate Either Local or Satellite Video Main Control Center s itor Local Camera Video Inputs Used for both Local and Trunk Lines Signal Distribution Unit To any Local Pan/Tilt/Zoom Camera Sites Up to. km ( ft) using sq mm ( AWG) Shielded Twisted Pair (Belden or Equivalent) Allegiant Keyboard Controls any Local or Remote Camera on any Local itor (Video and Pan/Tilt/Zoom) Multiple Video Trunk Lines from each Remote Satellite Location One Line to Each Remote Satellite System Location Pan/Tilt/Zoom and Satellite Control Data itor Outputs used as Video Trunk Lines to Main Control Site Video Trunk Lines from other Satellite Locations Any Model Allegiant Main Bay Local itor Console Port Input Satellite Data Line Data Converter Unit To any Local Pan/Tilt/Zoom Camera Sites Code Merger Unit Alarm Interface Unit Local Pan/Tilt/Zoom Control Data Line Alarm Inputs Activate only Local Video on Local itors Allegiant Keyboard Controls any of the Local Cameras on any of the Local itors (Video and Pan/Tilt/Zoom) Technical specifications LTC Series System Specifications Capacities Video Inputs Standard Satellite Configuration Video Outputs Keyboards Alarm Inputs Receiver/Drivers Standard Satellite Configuration Electrical Input Voltage Level. Vp-p to Vp-p (composite negative sync) Gain Unity ± % ( Ohm terminated) Pulse/Bar Ratios Min. Nom. Max. % % % T Pulse K Factor Min. Nom. Max..%.% Bar Amplitude (IRE) Min. Nom. Max. Sync Amplitude (% Bar) Min. Nom. Max. Field Time Waveform Distortion Line Time Waveform Distortion Short Time Waveform Distortion % % % % maximum % maximum % maximum

6 LTC Series Allegiant Matrix/Control Systems - Modular Long Time Waveform Distortion Video Bandwidth (- db) Frequency Response Signal-to-Noise-Ratio Crosstalk (at. MHz) Hum.% maximum MHz ±. db to MHz db at. MHz unified unweighted minimum Typical: db, Adjacent channel: db (typical) db below the composite Vp-p video signal from Hz to MHz Differential Gain Min. Nom. Max..% % Differential Phase Min. Nom. Max... Chrominance Luminance Gain Min. Nom. Max. % % % Chrominance Luminance Delay Min. Nom. Max. ns + ns + ns Luminance Nonlinearity Min. Nom. Max. Switching DC Output Transient Protection (VIM Cards) Crosspoint matrix V Meets EIA/TIA - C Medium Haul Standard for cameras x monitors. Environmental Temperature Operating Storage Altitude Humidity Vibration Shock C to C ( F to F) C to C ( F to F) m (, ft).% % W Peak Pulse Power (tp = / µs to % relative, non-condensing g swept sine wave, Hz to Hz g, m/s, ½ sine wave LTC CPU Equipment Bay The LTC / and LTC / include the equipment rack, LTC / microprocessor module, LTC / power supply, and LTC / relay module. Electrical Model No. Rated Voltage Voltage Range Nominal Power LTC / VAC, / Hz to W LTC / Power at rated voltage fully loaded. Connectors Controller Port Console Alarm Bi-Phase COM Ports Keyboards LAN Components Equipment Rack Construction Finish VAC, / Hz to W -pin D-type RS- port for an external PC or computing device (default =, baud) -pin D-type RS- port for an external computer or a computing device (default =, baud) -pin D-type RS- port for an Allegiant alarm accessory unit (default =, baud) -pin D-type TTL level, high-speed control data output (BiPhase) for interface to an Allegiant series signal distribution units (data clock rate =. khz) Two -pin D-type RS- ports for an external Allegiant accessory use Eight (), -pin RS- ports for an Allegiant keyboard use (default = baud) RJ- high-speed LAN port for interface to LTC Series and LTC Series bays via LTC Series LAN switches EIA cm ( in.) rack, x x mm (. x. x. in.). kg (. lb) Metal case with plastic panel Charcoal Microprocessor Module (LTC /) x mm (. x. in.). kg (. lb) Power Supply (One-LTC /) Relay Module (LTC /) x mm (. x. in.) Front Panel Indicators Power, CPU activity

7 LTC Series Allegiant Matrix/Control Systems - Modular LTC Series CPU Equipment Bay The LTC / and LTC / include the equipment rack, dual LTC / microprocessor modules, dual LTC / power supplies, and one LTC / relay module. Electrical Model No. Rated Voltage Voltage Range LTC / LTC / Power at rated voltage fully loaded. Connectors Controller Ports Console Alarm Switch Ctrl VAC, / Hz VAC, / Hz to to Nominal Power W W Two (), RS- ports for an LTC PC controller interface (default =, baud) RS- port for an external computer or a computing device (default =, baud) RS- port for an Allegiant alarm accessory unit (default =, baud) Digital interface port for the LTC PC controller Relay Module (LTC /) Front Panel Indicators LTC Primary power Primary fault Back-up power Back-up fault Primary CPU in-use Controller activity Back-up CPU in-use Auto-select mode Primary CPU activity Fault buzzer Back-up CPU activity LTC Power CPU Activity Rear Panel Indicators Relay outputs Primary CPU fault Back-up power supply failure Back-up CPU fault Any failure Primary power supply failure x mm (. x. in.) Bi-Phase COM Ports Keyboards LAN Components Equipment Rack TTL level, hi-speed control data output (Bi-Phase) for interface to an Allegiant series signal distribution units (data clock rate =. khz) Two (), RS- port for an external Allegiant accessory use Eight (), -pin RS- ports for an Allegiant keyboard use (default = baud) Two RJ- high-speed LAN ports for interface to LTC Series and LTC Series bays via LTC Series and LTC Series LAN Switches Relay Contacts: VAC, V peak, A. LTC Series itor Output Bays The LTC / and LTC / include the equipment rack, LTC / data receiver module, and LTC Series power supply. Electrical Model No. Rated Voltage Voltage Range Nominal Power LTC / VAC, / Hz to W LTC / Power at rated voltage fully loaded. VAC, / Hz to W Construction Finish EIA cm ( in.) rack, x x mm (. x. x. in.) kg (. lb) Metal case with plastic panel Charcoal Microprocessor Modules (Two LTC /) x mm (. x. in.). kg (. lb) Power Supplies (Two LTC /) Connectors Video Outputs Video Bus Connections Console COM COM Four (), -pin ribbon connectors used in conjunction with the LTC / video interconnect panel Sixteen (), -pin ribbon connectors interconnect with LTC Series Camera Input bays using LTC / ribbon cables

8 LTC Series Allegiant Matrix/Control Systems - Modular EXT Sync V Sync External Data Interface Components Equipment Rack Construction Finish BNC input used to synchronize the unit to an external sync signal. Accepts composite video, composite sync, or the V Sync output provided from another LTC Series matrix bay BNC connector provides an output signal to synchronize an additional LTC Series matrix bay via its EXT Sync input Two (), RJ- high-speed LAN ports for interface to the LTC Main CPU bay via system LAN Switches. (Connected in parallel; one is used, one is reserved for future use) EIA cm ( in.) rack, x x mm ( x. x. in.). kg (. lb) Metal cabinet Charcoal Data Receiver Module (LTC /) EIA cm ( in.) rack, x x mm ( x. x. in.). kg (. lb) Power Supply (LTC / or LTC /) Indicators x x mm (. x. x. in.). kg (. lb) Power On/Off and fuse alert LEDs LTC Series Camera Input Bays The LTC / and LTC / include the equipment rack, LTC / data receiver module, and LTC Series power supply. Electrical Model No. Rated Voltage Voltage Range LTC / LTC / Power at rated voltage fully loaded. Connectors Video Inputs Looping Video Input Connections VAC, / Hz VAC, / Hz Nominal Power to W to W Sixteen (), -pin ribbon connectors used in conjunction with the LTC / video interconnect panel Sixteen (), -pin ribbon connectors used with LTC / ribbon cables (supplied as required to loop to additional LTC Series bays) Video Bus Connections Console COM COM EXT SYNC V SYNC External Data Interface Components Equipment Rack Construction Finish Four (), -pin ribbon connectors interconnect with LTC Series camera input bays using LTC / ribbon cables BNC input used to synchronize unit to external sync signal; accepts composite video, composite sync, or the V Sync output provided from another LTC Series matrix bay BNC connector provides output signal to synchronize an additional LTC Series matrix bay via its EXT Sync input Two (), RJ- high-speed LAN ports for interface to LTC main CPU bay via system LAN Switches (Connected in parallel; one is used, one is reserved for future use) EIA cm ( in.) rack, x x mm ( x. x. in.). kg (. lb) Metal cabinet Charcoal Data Receiver Module (LTC /) EIA cm ( in.) rack, x x mm ( x. x. in.). kg (. lb) Power Supply (LTC / or LTC /) Size Indicators x x mm (. x. x. in.). kg (. lb) Power On/Off and fuse alert LEDs LTC / Video Input Module Use up to sixteen per LTC Series camera input bays. Camera Inputs Size x mm (. x. in.). kg (. lb) LTC / Video Output Module Use up to eight per LTC Series monitor output bays. itor Outputs

9 LTC Series Allegiant Matrix/Control Systems - Modular x mm (. x. in.). kg (. lb) LTC / System Controller (Redundant System Configurations Only) Includes LTC / PC, LTC / Primary LAN Switch and LTC / Backup LAN Switch LTC / PC LTC / itor (UML--) itor Rack (UMM-LCDUB- RM) LTC / Primary LAN Switch LTC / Back-Up LAN Switch Rack-mount industrial-grade Pentium PC, MB RAM (minimum), GB solid state hard drive (minimum), CD-/DVD burner, floppy drive, keyboard, mouse, keyboard/mouse rack-mount shelf, and Windows XP Professional; / VAC, / Hz Allegiant Master Control software (installed on PC). cm ( in.) LCD panel / VAC, / Hz Racked Height:. cm (. in.) Racked Width:. cm (. in.) -port /Base-T Ethernet Switch with SNMP Module, programmed with primary IP Address; / VAC, / Hz -port /Base-T Ethernet Switch with SNMP Module, programmed with back-up IP Address; / VAC, / Hz LTC / Expansion LAN Switch -port /BaseT Ethernet Switch, no SNMP module; / VAC, / Hz LTC / Video Interconnect Panel The LTC / assembly contains an interconnect panel which is used to convert BNC connectors into two -channel ribbon cable connectors. The two () coaxial ribbon cables (LTC /), designed especially for use with video signals, and are then used to interconnect the video between the panel and the LTC system. Use of the LTC / assemblies are required for all external video input and output connections. In addition to being used for video inputs and monitor outputs, the LTC / assembly is also used to provide looping capability. One () LTC / (includes panel and two ribbon cables) is required for each group of system cameras or monitors. Panel. kg (. lb) Ribbon Cables Construction Finish EIA cm ( in.) rack, x x mm ( x. x. in.) Two (),. kg (. lb) Metal Charcoal Allegiant Accessories The LTC Series accessory products provide many optional features to the base Allegiant switching systems. Accessory products include keyboard extension kits, Allegiant Bilinx Data Interface unit, receiver/driver units, switcher/followers, code merger units, video ribbon cables, and keyboard expansion units. All accessory products are designed to be installer-friendly and compatible throughout the Allegiant series systems. See the Allegiant Accessories datasheet. Ordering information LTC / Allegiant Dual CPU Bay Dual CPU bay, VAC Order number LTC / LTC / Allegiant Dual CPU Bay Dual CPU bay, VAC Order number LTC / LTC / Allegiant itor Bay itor bay, VAC Order number LTC / LTC / Allegiant itor Bay itor bay, VAC Order number LTC / LTC / Allegiant Camera Bay Camera bay, VAC Order number LTC / LTC / Allegiant Camera Bay Camera bay, VAC Order number LTC / LTC / Allegiant CPU Bay CPU bay, VAC Order number LTC / LTC / Allegiant CPU Bay CPU bay, VAC Order number LTC / LTC / Power Supply for LTC and LTC Series, / VAC Order number LTC / LTC / Power Supply for LTC /, VAC Order number LTC / LTC / Power Supply for LTC /, VAC Order number LTC / LTC / CPU Module CPU module for LTC and LTC Series Order number LTC / LTC / Data Receiving Module for LTC Series Order number LTC /

10 LTC Series Allegiant Matrix/Control Systems - Modular LTC / Relay Module for LTC Series Order number LTC / LTC / Data Receiving Module for LTC series Order number LTC / LTC / Video Input Module for LTC Series Order number LTC / LTC / Video Output Module for LTC Series Order number LTC / LTC /- VOM LTC VOM with Korean characters Order number LTC /- LTC / PC/itor/LAN/Software Package for LTC Series Order number LTC / LTC / Programmed -port Primary LAN Order number LTC / LTC / Programmed -port Backup LAN Order number LTC / LTC / Basic -port Expansion LAN Order number LTC / LTC / Allegiant Master Control Software Order number LTC / Accessories LTC / Programmed -port Primary LAN Switch Order number LTC / LTC / Programmed -port Backup LAN Switch Order number LTC / LTC / Basic -port Expansion LAN Switch Order number LTC / Software Options SFT-VASA Hybrid IP - Analog/Matrix Video over IP Integration Software Order number SFT-VASA SFT INTSRV Integration Server Software Allegiant integration software package Order number SFT-INTSRV Represented by: Americas: Europe, Middle East, Africa: Asia-Pacific: China: America Latina: Bosch Security Systems, Inc. Bosch Security Systems B.V. Robert Bosch (SEA) Pte Ltd, Security Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division Perinton Parkway Fairport, New York,, USA Phone: + Fax: + security.sales@us.bosch.com P.O. Box BA Eindhoven, The Netherlands Phone: + Fax: + emea.securitysystems@bosch.com Systems Bishan Street Singapore Phone: + Fax: + apr.securitysystems@bosch.com Building, No. Fuquan Road North IBP Changning District, Shanghai China Phone + Fax: + Via Anhanguera, Km CEP - Campinas, Sao Paulo, Brazil Phone: + Fax: + latam.boschsecurity@bosch.com Bosch Security Systems Data subject to change without notice en, V,. Feb