Dette certifikat giver godkendelsesindehaveren rettighed til at markedsføre nedenstående byggevare med Godkendt til drikkevand -mærkning i Danmark.
|
|
|
- Willis Simmons
- 7 years ago
- Views:
Transcription
1 CERTIFIKAT GODKENDELSE 03/00012 Udstedt: 10. juni 2014 Udløber: 9. juni 2017 Udstedt i henhold til bekendtgørelse nr. 31 af 21. januar 2013 om udstedelse af godkendelser for byggevarer i kontakt med drikkevand, som er ændret ved bekendtgørelse nr af 5. november Dette certifikat giver godkendelsesindehaveren rettighed til at markedsføre nedenstående byggevare med Godkendt til drikkevand -mærkning i Danmark. GODKENDELSESINDEHAVER: Tiemme Raccorderie S.p.A. Via Cavallera 6/A (loc.barco) Castegnato Italy Telefon: BYGGEVARE: Series 1400 Compressions fittings for PEX pipes mm BETINGELSER FOR GODKENDELSE: De nærmere betingelser og vilkår for godkendelsen er fastsat i bekendtgørelse nr. 31 af 21. januar 2013 om udstedelse af godkendelser for byggevarer i kontakt med drikkevand, som er ændret ved bekendtgørelse nr af 5. november 2013, samt i Energistyrelsens vejledende udtalelse af 6. november 2013 om aftaler om årligt tilsyn, jf. 12, stk. 1 i Bekendtgørelse nr. 31 af 21. januar Endvidere henvises til brev om godkendelse af byggevare i kontakt med drikkevand af 10. juni 2014 og eventuelle senere ændringer hertil fremsendt til godkendelsesindehaver. Markedsføring af byggevaren efter nærværende godkendelse omfatter de versioner af byggevaren, der er beskrevet i bilaget, og den variantproduktion, der er angivet i bilaget. Sekretariatet for byggevarer godkendt til drikkevand Gregersensvej Taastrup PROD Reg. nr Telefon (mandag-torsdag 9-16, fredag 9-14): Mail: kontakt@godkendttildrikkevand.dk web:
2 Bilag til Godkendelse 03/00012 Versioner af byggevaren omfattet af godkendelsen Overordnede informationer om byggevaren Brand navn Produktnavne Overall item / serial number Serie 1400 Compression fittings for PEX-pipes 12 mm to 32 mm 1400xxx Versioner Varetekst Dimension (Diameter (mm) eller nominel størrelse (tommemål)) Form Vare- og serienummer x 3/8" thickness 2,0 Straight fitting male x 1/2" thickness 2,0 Straight fitting male x 1/2" thickness 2,5 Straight fitting male x 3/8" thickness 2,5 Straight fitting male x 3/4" thickness 2,5 Straight fitting male x 1/2" thickness 2,0 Straight fitting male x 1/2" thickness 2,2 Straight fitting male x 1/2" thickness 2,3 Straight fitting male x 3/4" thickness 2,0 Straight fitting male x 3/4" thickness 2,2 Straight fitting male x 1/2" thickness 2,0 Straight fitting male x 1/2" thickness 2,5 Straight fitting male x 3/4" thickness 2,0 Straight fitting male x 3/4" thickness 2,5 Straight fitting male x 1/2" thickness 2,0 Straight fitting male x 1/2" thickness 2,8 Straight fitting male x 3/4" thickness 2,0 Straight fitting male x 3/4" thickness 2,8 Straight fitting male x 1/2" thickness 3,0 Straight fitting male x 3/4" thickness 3,0 Straight fitting male x 3/4" thickness 2,3 Straight fitting male x 3/4" thickness 3,5 Straight fitting male x 1" thickness 2,3 Straight fitting male x 1" thickness 3,5 Straight fitting male x 3/4" thickness 3,0 Straight fitting male x 3/4" thickness 4,0 Straight fitting male x 1" thickness 3,0 Straight fitting male Side 1 af 6
3 x 1" thickness 4,0 Straight fitting male x 3/4" thickness 3,0 Straight fitting male x 1" thickness 3,0 Straight fitting male x 1" thickness 4,4 Straight fitting male x 12 thickness 2,0 Straight fitting double x 15 thickness 2,5 Straight fitting double x 16 thickness 2,0 Straight fitting double x 16 thickness 2,2 Straight fitting double x 16 thickness 2,3 Straight fitting double x 18 thickness 2,0 Straight fitting double x 18 thickness 2,5 Straight fitting double x 20 thickness 2,0 Straight fitting double x 20 thickness 2,8 Straight fitting double x 22 thickness 3,0 Straight fitting double x 25 thickness 2,3 Straight fitting double x 25 thickness 3,5 Straight fitting double x 28 thickness 3,0 Straight fitting double x 28 thickness 4,0 Straight fitting double x 32 thickness 3,0 Straight fitting double x 32 thickness 4,4 Straight fitting double x 3/8" thickness 2,0 Straight fitting female x 1/2" thickness 1,1 Straight fitting female x 1/2" thickness 2,0 Straight fitting female x 1/2" thickness 2,5 Straight fitting female x 3/8" thickness 2,5 Straight fitting female x 3/4" thickness 2,5 Straight fitting female x 1/2" thickness 1,5 Straight fitting female x 1/2" thickness 2,0 Straight fitting female x 1/2" thickness 2,2 Straight fitting female x 1/2" thickness 2,3 Straight fitting female x 3/4" thickness 2,0 Straight fitting female x 3/4" thickness 2,2 Straight fitting female x 1/2" thickness 2,0 Straight fitting female x 1/2" thickness 2,5 Straight fitting female x 3/4" thickness 2,0 Straight fitting female x 3/4" thickness 2,5 Straight fitting female x 1/2" thickness 2,0 Straight fitting female x 1/2" thickness 2,8 Straight fitting female x 3/4" thickness 2,0 Straight fitting female x 3/4" thickness 2,8 Straight fitting female x 1/2" thickness 3,0 Straight fitting female x 3/4" thickness 3,0 Straight fitting female Side 2 af 6
4 x 1" thickness 3,0 Straight fitting female x 3/4" thickness 2,3 Straight fitting female x 3/4" thickness 3,5 Straight fitting female x 1" thickness 2,3 Straight fitting female x 1" thickness 3,5 Straight fitting female x 3/4" thickness 3,0 Straight fitting female x 3/4" thickness 4,0 Straight fitting female x 1" thickness 3,0 Straight fitting female x 1" thickness 4,0 Straight fitting female x 3/4" thickness 3,0 Straight fitting female x 1" thickness 3,0 Straight fitting female x 1" thickness 4,4 Straight fitting female x 12 thickness 1,1 Elbow double x 12 thickness 2,0 Elbow double x 15 thickness 2,5 Elbow double x 16 thickness 1,5 Elbow double x 16 thickness 2,0 Elbow double x 16 thickness 2,2 Elbow double x 18 thickness 2,0 Elbow double x 18 thickness 2,5 Elbow double x 20 thickness 2,0 Elbow double x 20 thickness 2,8 Elbow double x 22 thickness 3,0 Elbow double x 25 thickness 2,3 Elbow double x 25 thickness 3,5 Elbow double x 28 thickness 3,0 Elbow double x 28 thickness 4,0 Elbow double x 32 thickness 3,0 Elbow double x 32 thickness 4,4 Elbow double x 1/2" thickness 1,1 Elbow male x 1/2" thickness 2,0 Elbow male x 1/2" thickness 2,5 Elbow male x 3/4" thickness 2,5 Elbow male x 1/2" thickness 1,5 Elbow male x 1/2" thickness 2,0 Elbow male x 1/2" thickness 2,2 Elbow male x 3/4" thickness 2,0 Elbow male x 3/4" thickness 2,2 Elbow male x 1/2" thickness 2,0 Elbow male x 1/2" thickness 2,5 Elbow male x 3/4" thickness 2,5 Elbow male x 1/2" thickness 2,0 Elbow male Side 3 af 6
5 x 1/2" thickness 2,8 Elbow male x 3/4" thickness 2,0 Elbow male x 3/4" thickness 2,8 Elbow male x 3/4" thickness 3,0 Elbow male x 3/4" thickness 2,3 Elbow male x 3/4" thickness 3,5 Elbow male x 1" thickness 2,3 Elbow male x 1" thickness 3,5 Elbow male x 1" thickness 3,0 Elbow male x 1" thickness 4,0 Elbow male x 3/4" thickness 3,0 Elbow male x 1" thickness 3,0 Elbow male x 1" thickness 4,4 Elbow male x 1/2" thickness 1,1 Elbow female x 1/2" thickness 2,0 Elbow female x 1/2" thickness 2,5 Elbow female x 3/4" thickness 2,5 Elbow female x 1/2" thickness 1,5 Elbow female x 1/2" thickness 2,0 Elbow female x 1/2" thickness 2,2 Elbow female x 1/2" thickness 2,3 Elbow female x 3/4" thickness 2,0 Elbow female x 3/4" thickness 2,2 Elbow female x 1/2" thickness 2,0 Elbow female x 1/2" thickness 2,5 Elbow female x 3/4" thickness 2,5 Elbow female x 1/2" thickness 2,0 Elbow female x 1/2" thickness 2,8 Elbow female x 3/4" thickness 2,0 Elbow female x 3/4" thickness 2,8 Elbow female x 1/2" thickness 3,0 Elbow female x 3/4" thickness 3,0 Elbow female x 3/4" thickness 2,3 Elbow female x 3/4" thickness 3,5 Elbow female x 1" thickness 2,3 Elbow female x 1" thickness 3,5 Elbow female x 1" thickness 3,0 Elbow female x 1" thickness 4,0 Elbow female x 1" thickness 3,0 Elbow female x 1" thickness 4,4 Elbow female x 1/2" thickness 1,1 Wallplate elbo female x 1/2" thickness 2,0 Wallplate elbo female Side 4 af 6
6 x 1/2" thickness 2,5 Wallplate elbo female x 1/2" thickness 1,5 Wallplate elbo female x 1/2" thickness 2,0 Wallplate elbo female x 1/2" thickness 2,2 Wallplate elbo female x 1/2" thickness 2,0 Wallplate elbo female x 1/2" thickness 2,5 Wallplate elbo female x 12 x 12 thickness 1,1 Tee x 12 x 12 thickness 2,0 Tee x 15 x 15 thickness 2,5 Tee x 16 x 16 thickness 1,5 Tee x 16 x 16 thickness 2,0 Tee x 16 x 16 thickness 2,2 Tee x 18 x 18 thickness 2,0 Tee x 18 x 18 thickness 2,5 Tee x 20 x 20 thickness 2,0 Tee (Testversion) x 20 x 20 thickness 2,8 Tee x 22 x 22 thickness 3,0 Tee x 25 x 25 thickness 2,3 Tee x 25 x 25 thickness 3,5 Tee x 28 x 28 thickness 3,0 Tee x 32 x 32 thickness 3,0 Tee x 32 x 32 thickness 4,4 Tee x 1/2" x 12 thickness 1,1 Tee male x 1/2" x 12 thickness 2,0 Tee male x 1/2" x 15 thickness 2,5 Tee male x 1/2" x 16 thickness 1,5 Tee male x 1/2" x 16 thickness 2,0 Tee male x 1/2" x 16 thickness 2,2 Tee male x 1/2" x 18 thickness 2,0 Tee male x 1/2" x 18 thickness 2,5 Tee male x 3/4" x 20 thickness 2,8 Tee male x 1/2" x 22 thickness 3,0 Tee male x 3/4" x 22 thickness 3,0 Tee male x 1" x 25 thickness 2,3 Tee male x 1" x 25 thickness 3,5 Tee male x 1" x 28 thickness 3,0 Tee male x 1" x 32 thickness 3,0 Tee male x 1" x 32 thickness 4,4 Tee male x 1/2" x 12 thickness 1,1 Tee female x 1/2" x 12 thickness 2,0 Tee female x 1/2" x 15 thickness 2,5 Tee female x 1/2" x 16 thickness 1,5 Tee female Side 5 af 6
7 x 1/2" x 16 thickness 2,0 Tee female x 1/2" x 16 thickness 2,2 Tee female x 1/2" x 18 thickness 2,0 Tee female x 1/2" x 18 thickness 2,5 Tee female x 1/2" x 20 thickness 2,0 Tee female x 3/4" x 20 thickness 2,0 Tee female x 3/4" x 20 thickness 2,8 Tee female x 1/2" x 22 thickness 3,0 Tee female x 3/4" x 22 thickness 3,0 Tee female x 3/4" x 25 thickness 2,3 Tee female x 3/4" x 25 thickness 3,5 Tee female x 3/4" x 28 thickness 3,0 Tee female x 1" x 28 thickness 3,0 Tee female x 3/4" x 32 thickness 3,0 Tee female x 3/4" x 32 thickness 4,4 Tee female x 1" x 32 thickness 3,0 Tee female x 15 thickness 3,0/2,5 Reduced union x 18 thickness 3,0/2,5 Reduced union x 22 thickness 3,0/3,0 Reduced union x 15 thickness 3,0/2,5 Reduced elbow x 22 x 18 thickness 2,5/3,0/2,5 Reduced tee MP 12 x 1/2" thickness 1,1 Elbow female MP 12 x 1/2" thickness 2,0 Elbow female MP 15 x 1/2" thickness 2,5 Elbow female MP 15 x 1/2" thickness all Elbow female MP 16 x 1/2" thickness all Elbow female MP 16 x 1/2" thickness 2,0 Elbow female XL 16 x 1/2" thickness 2,0 Elbow female long MP 16 x 1/2" thickness 2,2 Elbow female XL 16 x 1/2" thickness 2,2 Elbow female long MP 18 x 1/2" thickness 2,0 Elbow female MP 18 x 1/2" thickness 2,5 Elbow female MP 20 x 1/2" thickness 2,0 Elbow female MP 20 x 1/2" thickness 2,8 Elbow female Byggevaren kan alene produceres med variantproduktion inden for følgende spekter: Produktspekter for omfattede variantprodukter Indvendig Mindste 5.5 mm diameter Største 22.5 mm Længde Mindste 29.0 mm Største mm Side 6 af 6
Electronic signatures in Denmark: free for all citizens
Article Electronic in Denmark: free for all citizens JAN HVARRE Both the Directive and the Danish Act establish general principles for the approval of electronic Historical background Early Danish start
Machine Documentation BELKI Oil Separator type 301
Machine Documentation BELKI Oil Separator type 301 Content Technical dossier: Machine Specifications 3 Function: Oil separator Part 4 Suction part 5 Pump 7 Oil container 9 Machine prescription 9 Installations
Vejen til privat finansiering. 16. juni 2011
Vejen til privat finansiering 16. juni 2011 Vejen til privat finansiering 1 Præsentation 2 Investor og banken din første kunde 3 Struktureret søgning 4 Netværk til finansiering 5 Case Intelligent styring
Notice of Annual General Meeting of Directors and Shareholders and Complete Proposals
3 April 2009 Notice of Annual General Meeting of Directors and Shareholders and Complete Proposals Enclosed please find the notice of and the complete proposals for the Annual General Meeting of directors
Machine Documentation
Machine Documentation BELKI Oil Separator type 211 0 Tabel of contents: Machine Documention...0 Tabel of contens...1 Description...2 Specifications...3 Diagram...4 Partlist...5 Pumpdrawing...6 Part list
Kontrol- og indikeringsudstyr med options som givet i bilag 4 Control and fndicating Equipment with options as given rn annex 4
È DANAK Reg nr.7004 r Ceftifikat nr, CertifÌcate no. 232.L406 Siemens A/S Borupvang 3 2750 Ballerup har på baggrund af vurderede typeegenskaber baseret på typeprøvningsrapport(er) for overensstemmelse
Ølfestival 2012. Leje af standudstyr Rent of stand equipment. Leje af pakkeløsning / Rent of ready to go package
Leje af pakkeløsning / Rent of ready to go package 8305 Samlet pakke med / Complete package with 2 klapstole / folding chairs 1 cafébord / café table 1 stuebirk i silke / birch in silk 1 brochurestander
COACH BOT Modular e-course with virtual coach tool support
COACH BOT Modular e-course with virtual coach tool support LIFELONG LEARNING PROGRAM LEONARDO da VINCI Aarhus Social and Health Care College TRAINING FOR HEALTHCARE PROFESSIONALS AND HOME CARE PROVIDERS
The Role of Ship Classification Ownership and Future Challenges
The Role of Ship Classification Ownership and Future Challenges Lloyd s Register s View, Experience and References IDA 17th March 2014 Working together for a safer world My Background and Experience 1985
P-EG stainless steel housing for gas filtration
P-EG stainless steel housing for gas filtration ultra.filter P-EG The P-EG stainless steel housing was developped for purification of compressed air an other technical gases. With the optimized construction
Definox Prøveudtagsventiler / Definox Sampling Valves
Scanding DEFINOX PRØVEUDTAGSVENTILER / DEFINOX SAMPLING VALVES - Side. Issue AB:06-2012 Definox Prøveudtagsventiler / Definox Sampling Valves 241 DEFINOX PRØVEUDTAGSVENTILER / DEFINOX SAMPLING VALVES PEX,
Business development. Linnea Jacobsen. 1. semester 2014
Business development Linnea Jacobsen 1. semester 2014 v Business Models v Business Model Canvas v Groupwork Literature Alexander Osterwalder & Yves Pigneur: Business Model Generation: s. 14-47 + 76-103
Country: Denmark Date Table Completed: April 2009 Person(s) completing Table:
Country: Denmark Date Table Completed: April 2009 Person(s) completing Table: Short introduction on transposition context The main measures transposing Directive 94/62/EC into Danish are Statutory Orders
Seilingsliste. Nordgående. Januar. Februar
6 Nordgående Skip Fra Bergen Til og a Sandnessjøen Harstad Hammerfest Ankomst Trdheim Bodø Trom Hningsvåg Kirkenes Finnrken ** Kg Harald Finnrken * Kg Harald Finnrken Kg Harald Finnrken Kg Harald Finnrken
ultrafilter VARIOBLO Heat Regenerated Adsorption Dryer
Why drying compressed air? Compressed air is used in almost all areas of industrial manufacturing as a source of energy or processing. Compressed air needs to be dry, oilfree and clean in order to prevent
SCR, MCR og Own Funds
, og Own Funds Tirsdag d. 8. maj 2012 kl. 13.30 Mads Tarp, Kjersti Kjosås og Bo Pedersen Dagsorden Proces Gennemgang af skemaer Own funds og Afrunding: Eventuelle resterende spørgsmål Spørgsmål må gerne
Informationsteknologi Serviceledelse Del 3: Vejledning i definition af emne og brug af ISO/IEC 20000-1
DS-information DS/ISO/IEC TR 20000-3 1. udgave 2009-10-21 Informationsteknologi Serviceledelse Del 3: Vejledning i definition af emne og brug af ISO/IEC 20000-1 Information technology Service management
ATEX instruction APP 21-38 pumps
ATEX instruction APP 2138 pumps rosolutions.com The Danfoss APP 2138 pumps are marked for application in Group II Category 2 or Category 3 systems. II 3 G c T6 II 2 G c b T6 Example ATEX pump label This
Tallotteri. En pose indeholder 90 brikker, som er forsynet med tallene 1,2,3,.,90.
Tallotteri En pose indeholder 90 brikker, som er forsynet med tallene 1,2,3,.,90. Følgende proces gentages indtil der kun er én brik tilbage: Vælg to vilkårlige brikker med tallene x og y (x y), og erstat
Softwareudvikling Retningslinjer for anvendelse af ISO 9001:2008 til computersoftware
Dansk standard DS/ISO/IEC 90003:2015 2. udgave 2015-01-07 Softwareudvikling Retningslinjer for anvendelse af ISO 9001:2008 til computersoftware Software engineering Guidelines for the application of ISO
SINGLE-PILOT AEROPLANE (Non-HPCA)
SINGLE-ILOT EROLNE (Non-HC) SKILL TEST ROFICIENCY CHECK Licence Endorsement: IC CO-ILOT VFR IFR pplication and report form. Udfyldes af ansøgeren/to be filled out by the applicant: CR-nr./Date of Birth:
Global Project Management Enablers - Enabling High Performance Global Project Teams
Global Project Management Enablers - Enabling High Performance Global Project Teams One of the competitive advantages of companies that successfully develop new products globally lies in their ability
Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger
Dansk standard DS/EN ISO 6974-2 2. udgave 2012-06-20 Naturgas Bestemmelse af sammensætning med defineret usikkerhed ved gaskromatografi Del 2: Usikkerhedsberegninger Natural gas Determination of composition
ultrafilter HEATLESS HL Adsorption Dryer
The EW product line of HeatLess adsorption dryers Why drying compressed air? Compressed air is used in almost all areas of industrial manufacturing as a source of energy or processing. Compressed air needs
Akkrediteringsrådet har vurderet, at CBS ikke i tilstrækkelig grad opfylder de fem kriterier i akkrediteringsbekendtgørelsens bilag 1.
Copenhagen Business School Rektor Per Holten Andersen Karin Tovborg Jensen Sendt pr. e mail: rektor@cbs.dk, cbs@cbs.dk, ktj@edu.cbs.dk Betinget positiv institutionsakkreditering af Copenhagen Business
BALLOMAX PN16 / 40, DN 10-50
BALLOMAX PN6 / 40, DN 0-50 helsvejset stålkugleventil Fully-welded steel ball valve 0 2 3 6 4 7 5 A B 2 3 4 5 6 Benævnelse Materiale Article Material Svejseende Stål St 37.0 Welding end Steel St 37.0 A
Model Tub Design Jens Juul Eilersen
Arm height: 58.5 cm Arm width: 7 cm Arm cushion width: 20 cm Total depth (frame): 94 / 104 cm Seat depth: 68 / 78 cm Seat height: 40 cm Total height (frame): 58.5 cm 110 x 94 / 104 cm 180 x 94 cm 120 x
GB INTRODUCTION manual:
GS - GS/L S2/S4 4 5 GB INTRODUCTION manual: Manufacturing Firm; The person responsible for the use of the fork truck must make sure that all of the safety rules in force in INSTRUCTIONS FOR USE 1) Do not
OVERVIEW of Danish regulation relating to the collection, storage and use of human biological material in health research projects
OVERVIEW of Danish regulation relating to the collection, storage and use of human biological material in health research projects Prepared by The Danish Association of the Pharmaceutical Industry (Lif)
Vejledning til en europæisk COREfaktura-datamodel. CII-retningslinjer for implementering Del 1: Introduktion
DS-information DS/CWA 16356-1 1. udgave 2011-11-09 Vejledning til en europæisk COREfaktura-datamodel med UN/CEFACT CII-retningslinjer for implementering Del 1: Introduktion Guide for a European CORE INVOICE
Informationsteknologi Små computersystemers. Del 251: USB-fæstnet SCSI (UAS)
Dansk standard DS/ISO/IEC 14776-251 1. udgave 2014-05-27 Informationsteknologi Små computersystemers grænseflade (SCSI) Del 251: USB-fæstnet SCSI (UAS) Information technology Small computer system interface
ULTRA.DRY HRE Heat Regenerated Adsorption Dryer
Wy drying compressed air? Compressed air is used in almost all areas of industrial manufacturing as a source of energy or processing. Compressed air needs to be dry, oilfree and clean in order to prevent
HALOTEC HARDWARE. TV, Video and Telephone Halotec Material. Tv & Video accessories. HDMI Connectors. Catalogue. Line. FAmily.
HDMI Connectors SK10055 3m HDMI nickel. Bag with tab Page 1 TV Euroconnectors SK10003 SCART 21-pin connection. Bag with tab SK10004 21-pin Scart connection Blister Page 2 Aerial Connections SK10005 Connector
Hvis personallisten ikke er ført slik reglene sier, kan Skatteetaten ilegge overtredelsesgebyr.
Denne boken er utgitt av Skatteetaten og sendes gratis til alle som er pålagt å føre personalliste fra 1. januar 2014. Det vil si bransjene servering, frisør, skjønnhetspleie, bilpleie og bilverksted.
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves - Side 1. Issue AB:06-2012 255 HyCom Fjedersikkerhedsventil / HyCom-Safety Valve Spring Loaded - Manuel / Manual - For gasarter,
Simple, secure content sharing on the move: the evolved portable wireless server from Sony that s made for your mobile
Pressemeddelelse Sony, 4. september 2013 Simple, secure content sharing on the move: the evolved portable wireless server from Sony that s made for your mobile WG-C20 makes a slim, beautiful partner for
PATENTSKRIFT. (74) Fuldmægtig: LINGPAT V/OLE JAGTBOE, Letlandsgade 3, 2.mf., 1723 København V, Danmark
(19) DANMARK e ~ Patent- og Varemærkestyrelsen (12) PATENTSKRIFT (10) DK 177424 81 (51) lnt.ci.: H 02 M 7110 (2006.01) (21) Ansøgningsnummer: PA 2011 00299 (22) Indleveringsdato: 2011-04-15 (24) Løbedag
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Hvordan skriver man en god kravspecifikation? DAu konference den 28. august om projektstyring
Hvordan skriver man en god kravspecifikation? DAu konference den 28. august om projektstyring Anders Vidstrup, Senior IT Quality SME, Quality & Security Kort fortalt NNIT er en af Danmarks fire største
Fuld Skolerapport for Søhusskolen, i Odense kommune, for skoleår 2013/2014 for klassetrin(ene) 9. med reference Tilsvarende klassetrin i kommunen
Side 1 af 41 Side 2 af 41 Side 3 af 41 Side 4 af 41 Side 5 af 41 Side 6 af 41 Side 7 af 41 Side 8 af 41 Side 9 af 41 Side 10 af 41 Side 11 af 41 Side 12 af 41 Side 13 af 41 Side 14 af 41 Side 15 af 41
Fuld Skolerapport for Hunderupskolen, i Odense kommune, for skoleår 2013/2014 for klassetrin(ene) 7. med reference Tilsvarende klassetrin i kommunen
Side 1 af 43 Side 2 af 43 Side 3 af 43 Side 4 af 43 Side 5 af 43 Side 6 af 43 Side 7 af 43 Side 8 af 43 Side 9 af 43 Side 10 af 43 Side 11 af 43 Side 12 af 43 Side 13 af 43 Side 14 af 43 Side 15 af 43
Informationsteknologi Serviceledelse Del 4: Procesreferencemodel
DS-information DS/ISO/IEC TR 20000-4 1. udgave 2010-12-14 Informationsteknologi Serviceledelse Del 4: Procesreferencemodel Information technology Service management Part 4: Process reference model DS/ISO/IEC
IEA HIA. IEA teknologi-netværk. Mr. Jan K. Jensen (ExCo Chairman), DGC. Energistyrelsen d. 7. november 2012
H Y D R O G E N I M P L E M E N T I N G A G R E E M E N T IEA HIA IEA teknologi-netværk Mr. Jan K. Jensen (ExCo Chairman), DGC Energistyrelsen d. 7. november 2012 IEA HIA Members - Executive Committee
Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde
Dansk standard DS/EN ISO 11680-2 3. udgave 2012-01-18 Skovbrugsmaskiner Sikkerhedskrav til og prøvning af motordrevne stangsave til beskæring Del 2: Maskiner med rygbåret energikilde Machinery for forestry
Information og dokumentation Ledelsessystem for dokumentstyring Krav
Dansk standard DS/ISO 30301 1. udgave 2011-11-22 Information og dokumentation Ledelsessystem for dokumentstyring Krav Information and documentation Management systems for records Requirements DS/ISO 30301
Field Cone Penetration Tests with Various Penetration Rates - Test Results Holmsgaard, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo
Aalborg Universitet Field Cone Penetration Tests with Various Penetration Rates - Test Results Holmsgaard, Rikke; Nielsen, Benjaminn Nordahl; Ibsen, Lars Bo Publication date: 2 Document Version Publisher's
Praksis inden for elektronisk fakturering i EU
DS-information DS/CWA 16463 1. udgave 2012-06-28 Praksis inden for elektronisk fakturering i EU Code of Practice for Electronic Invoicing in the European Union DS/CWA 16463 København DS projekt: M263481
SSV3 Life Time Extension District Heating Pump Drives.
SSV3 Life Time Extension District Heating Pump Drives. Info Version 5 URL http://com.mercell.com/permalink/43440050.aspx Ekstern udbuds ID 316677-2014 Udbudstype Tildeling af kontrakt Dokumenttype Indgåede
Termisk isolering i bygninger Reflekterende isoleringsprodukter Bestemmelse af deklareret termisk ydeevne
Dansk standard DS/EN 16012 1. udgave 2012-03-08 Termisk isolering i bygninger Reflekterende isoleringsprodukter Bestemmelse af deklareret termisk ydeevne Thermal insulation for buildings Reflective insulation
Test cases for railway noise Nord2000. Birger Plovsing DELTA
Test cases for railway noise Nord2000 Birger Plovsing DELTA Environmental Project No. 1391 2011 The Danish Environmental Protection Agency will, when opportunity offers, publish reports and contributions
FORSLAG / DRAFT DSF/DS/EN 13200-6 DK NA:2014
FORSLAG / DRAFT DSF/DS/EN 13200-6 DK NA:2014 Forslagsnr.: M287549 Draft no.: Forslaget er: The draft is: (IDT = identisk med/identical to - EQV = baseret på/equivalent to - MOD = modificeret/modified)
DANISH CENSUS HEADINGS WITH ENGLISH TRANSLATIONS
DANISH CENSUS HEADINGS WITH ENGLISH TRANSLATIONS Danish and English texts are not written full, but includes only words which are necesssay to give a correct understanding C. KØBENHAVN COPENHAGEN Year
Rubber condoms Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms
Dansk standard DS/ISO 16038 1. udgave 2005-11-14 Kondomer Vejledning i brug af ISO 4074 ved kvalitetsstyring af latexkondomer Rubber condoms Guidance on the use of ISO 4074 in the quality management of
EGA HANDICAP- SYSTEM 2016-2019. Hovedsponsor:
EGA HANDICAP- SYSTEM 2016-2019 Hovedsponsor: INDHOLDS (I) FOREWORD 3 (II) PRINCIPAL CHANGES 2016 4 (III) HOW TO USE THE MANUAL 5 (IV) EGA HANDICAP POLICY 6 (V) SYSTEM OVERVIEW 8 THE EGA HANDICAP SYSTEM
Søgeprotokol for Nationale Kliniske Retningslinjer
Søgeprotokol for Nationale Kliniske Retningslinjer Projekttitel/aspekt NKR for OCD søgning på PICOs - sekundær litteratur Kontakt Fagkonsulent Anne Dorothee Müller / Betina Højgaard /projektleder Kontakt
COPYRIGHT Danish Standards Foundation. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/IEC/TR 80001-2-2:2012
DS-information DS/IEC/TR 80001-2-2 1. udgave 2012-09-14 Anvendelse af risikostyring inden for itnetværk indbefattende medicinsk udstyr Del 2-2: Vejledning ved offentliggørelse og formidling af sikkerhedsbehov,
Packaging Linear bar code and twodimensional symbols for product packaging
Dansk standard DS/ISO 22742 1. udgave 2005-03-17 Emballage Lineær stregkode og todimensionelle symboler for emballage til produkter Packaging Linear bar code and twodimensional symbols for product packaging
UN Expert Mechanism on the Rights of Indigenous Peoples expertmechanism@ohchr.org
UN Expert Mechanism on the Rights of Indigenous Peoples expertmechanism@ohchr.org W I L D E R S P L A D S 8 K DK- 1 4 0 3 C O P E N H A G E N K P H O N E + 4 5 3 2 6 9 8 8 8 8 D I R E C T + 4 5 3 2 6 9
Information on determination of code numbers
Foreningen for Danmarks Farve og Lakindustri Nørre Voldgade 48. 1358 København K Information on determination of code numbers In 1982 an Executive Order on determination of code numbers and the connected
Ergonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov
Dansk standard DS/EN ISO 28803 1. udgave 2012-04-23 Ergonomi Fysisk miljø Anvendelse af internationale standarder for personer med særlige behov Ergonomics of the physical environment Application of international
Danish Wind Industry Association Danish Wind Turbine Owners' Association
Danish Wind Industry Association Danish Wind Turbine Owners' Association Low Frequency Noise from Wind Turbines: Do the Danish Regulations Have Any Impact? An analysis of noise measurements. January 2014
IZ15-IZ16. Montagevejledning Installation manual 11/2011
IZ15-IZ16 Montagevejledning Installation manual 11/2011 IZ15-001-DE_46-08: 799000441 Änderungen vorbehalten - Subject to change without notice - Sous reserve de modifications Con riserva di modifiche Sujeto
BRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
Questionnaire #1: The Patient (Spørgeskema, må gerne besvares på dansk)
Table of Contents Questionnaire #1: The Patient... 2 Questionnaire #2: The Medical Staff... 4 Questionnaire #3: The Visitors... 6 Questionnaire #4: The Non-Medical Staff... 7 Page1 Questionnaire #1: The
<Matthías saga digitalis 6.0/>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Informationsteknologi Softwarestyring (software asset management) Del 1: Processer og niveaudelt overensstemmelsesvurdering
Dansk standard DS/ISO/IEC 19770-1 2. udgave 2012-08-02 Informationsteknologi Softwarestyring (software asset management) Del 1: Processer og niveaudelt overensstemmelsesvurdering Information technology
Informationsteknologi Storage management Del 1: Oversigt
Dansk standard DS/ISO/IEC 24775-1 1. udgave 2014-11-13 Informationsteknologi Storage management Del 1: Oversigt Information technology Storage management Part 1: Overview DS/ISO/IEC 24775-1 København DS
Project BioCrete Task ID: 1 Date: 2006-11-22 Participant: AWS Name: DK
Project BioCrete Task ID: 1 Date: 2006-11-22 Participant: AWS Name: DK Preface BioCrete is the acronym for a LIFE supported project Utilisation of ash from incineration of wastewater sludge (bio ash) in
Agenda for Medlemsmøde & Generalforsamling 27. Januar 2016
Agenda for Medlemsmøde & Generalforsamling 27. Januar 2016 15.00-15.30: Agenda for Generalforsamlingen (hos Larix) : 1. Valg af dirigent 2. Formandens beretning 3. Præsentation og godkendelse af regnskab
Statistiske metoder i procesledelse Kapabilitet og performance Del 3: Analyse af maskinperformance for måleværdier på (diskrete) emner
Dansk standard DS/ISO 22514-3 1. udgave 2008-05-08 Statistiske metoder i procesledelse Kapabilitet og performance Del 3: Analyse af maskinperformance for måleværdier på (diskrete) emner Statistical methods
GUIDE to completion of the Excel spreadsheet
GUIDE to completion of the Excel spreadsheet 1 S i d e 1 TABLE OF CONTENTS 1 TABLE OF CONTENTS... 2 1.1 Data Entry Generalities... 3 1.2 Prepare data... 5 1.3 Simple Data Entry (horizontal direction)...
Software- og systemudvikling Softwaretest Del 1: Begreber og definitioner
Dansk standard DS/ISO/IEC/IEEE 29119-1 1. udgave 2013-09-26 Software- og systemudvikling Softwaretest Del 1: Begreber og definitioner Software and systems engineering Software testing Part 1: Concepts
Facility management Del 7: Vejledning i benchmarking af præstationer
Dansk standard DS/EN 15221-7 1. udgave 2012-11-06 Facility management Del 7: Vejledning i benchmarking af præstationer Facility Management Part 7: Guidelines for Performance Benchmarking DS/EN 15221-7
Informationsteknologi Personlig identifikation ISO-overensstemmende kørekort Del 2: Maskinlæsbare teknologier
Dansk standard Rettelsesblad DS/ISO/IEC 18013-2/Corr. 1 1. udgave 2012-01-25 Informationsteknologi Personlig identifikation ISO-overensstemmende kørekort Del 2: Maskinlæsbare teknologier Information technology
Rev. October 2007. Key terms in relation to twinning: Forkortelser og udtryk
Rev. October 2007 Key terms in relation to twinning: Forkortelser og udtryk Forkortelse Betydning Danske bemærkninger AA The Euro-Mediterranean Association Agreements are the main contractual agreements
An Exploration of the Effects of Performance Appraisal in Municipal Health Services
Til Doktorgradskollokvium i tilknytning til FIBE 2010 6 januar 2010 Mitt navn er Frǿydis Vasset. Jeg er en PhD student som er tilknyttet universitetet i Stavanger, samfumfunnsfaglig fakultet, avdeling
Retningslinjer for implementering af kvalitet i mobilitetsledelse i små og mellemstore byer
DS-information DS/CWA 16030 1. udgave 2009-10-30 Retningslinjer for implementering af kvalitet i mobilitetsledelse i små og mellemstore byer Code of practice for implementing quality in mobility management
Informationsteknologi Personlig identifikation ISO-overensstemmende kørekort Del 4: Prøvningsmetoder
Dansk standard DS/ISO/IEC 18013-4 1. udgave 2012-01-11 Informationsteknologi Personlig identifikation ISO-overensstemmende kørekort Del 4: Prøvningsmetoder Information technology Personal identification
Procesintegration og -automatisering. Michael Borges, Partner micborges@deloitte.dk
Procesintegration og -automatisering Michael Borges, Partner micborges@deloitte.dk Three eras of business automation The digital era The industrial era Machines replace heavy and dangerous manual work
Softwareudvikling Kvalitetskrav til og evaluering af softwareprodukter (SQuaRE) Fælles industriformat (CIF) til brugbare testrapporter
Dansk standard DS/ISO/IEC 25062 1. udgave 2008-05-08 Softwareudvikling Kvalitetskrav til og evaluering af softwareprodukter (SQuaRE) Fælles industriformat (CIF) til brugbare testrapporter Software engineering
SIL - TÜV Certified Functional Safety Engineer Safety Instrumented Systems IEC 61508 / IEC 61511
I samarbejde med TÜV Rheinland og Yokogawa giver Insatech dig muligheden for at tage et uddannelsesforløb, der efter bestået eksamen gør dig til: SIL - TÜV Certified Functional Safety Engineer Safety Instrumented
The Effect of a Classroom Management Intervention Results from an RCT Anders Holm, Maria Keilow, Mette Friis-Hansen, and Rune Kristensen
The Effect of a Classroom Management Intervention Results from an RCT Anders Holm, Maria Keilow, Mette Friis-Hansen, and Rune Kristensen Table 2. Course plan for the Classroom Management Intervention.
Laser Target Designators.
Laser Target Designators. Info Version 2 URL http://com.mercell.com/permalink/57201903.aspx Ekstern udbuds ID 079855-2016 Udbudstype Forhåndsmeddelelse Dokumenttype Vejledende forhåndsmeddelelse Udbudsprocedure
Jordundersøgelser Prøvetagning Del 5: Vejledning i undersøgelse af jordforurening på bymæssige og industrielle grunde
Dansk standard DS/ISO 10381-5 1. udgave 2005-11-09 Jordundersøgelser Prøvetagning Del 5: Vejledning i undersøgelse af jordforurening på bymæssige og industrielle grunde Soil quality Sampling Part 5: Guidance
Quality Guide. CJC Quality Guide Vol. 7 April 2015 1
Quality Guide CJC Quality Guide Vol. 7 April 2015 1 CJC Quality Guide An introduction to C.C.JENSEN A/S Quality Guide It is important that our customers know what C.C.JENSEN A/S stands for when talking
Sundhedsinformatik Kapacitetsbaseret roadmap for e-sundhedsarkitektur Del 1: Oversigt over nationale e-sundhedsinitiativer
DS-information DS/ISO/TR 14639-1 1. udgave 2012-10-11 Sundhedsinformatik Kapacitetsbaseret roadmap for e-sundhedsarkitektur Del 1: Oversigt over nationale e-sundhedsinitiativer Health informatics Capacity-based
Casestudier, der understøtter IEC 62232 Bestemmelse af RF-felter og SAR-værdier i nærheden af radiokommunikationsbasestationer
DS-information DS/IEC/TR 62669 1. udgave 2011-07-04 Casestudier, der understøtter IEC 62232 Bestemmelse af RF-felter og SAR-værdier i nærheden af radiokommunikationsbasestationer med det formål at evaluere
for kategori A3-multimodefibre
Dansk standard DS/EN 60793-2-30 3. udgave 2013-03-13 Optisk fiber Del 2-30: Produktspecifikationer Sektionsspecifikation for kategori A3-multimodefibre Optical fibres Part 2-30: Product specifications
Metode til beregning og deklaration af energiforbrug og emissioner af GHG (drivhusgassser) inden for transportsektoren (gods- og passagertransport)
Dansk standard DS/EN 16258 1. udgave 2012-12-10 Metode til beregning og deklaration af energiforbrug og emissioner af GHG (drivhusgassser) inden for transportsektoren (gods- og passagertransport) Methodology
af oral antikoagulationsterapi
Dansk standard DS/ISO 17593 1. udgave 2007-05-31 Klinisk laboratorieprøvning og in-vitro diagnostisk udstyr - Krav til in vitroovervågningssystemer til selvundersøgelse af oral antikoagulationsterapi Clinical
KVALITETSKONTROL (PIE) - MATERIALELISTE
KVALITETSKONTROL (PIE) - MATERIALELISTE Materialelisten er baseret på Common Audit Inspection Methodology (herefter CAIM), som er udviklet af European Inspection Audit Group (herefter EAIG) i overensstemmelse
How To Write An International Safety Standard
Dansk standard DS/ISO 26262-6 1. udgave 2012-01-11 Motorkøretøjer Funktionssikkerhed Del 6: Produktudvikling på softwareniveau Road vehicles Functional safety Part 6: Product development at the software
Informationsteknologi Prøvningsmetoder. (MRTD) og tilhørende udstyr Del 1: Fysiske prøvningsmetoder for pas (holdbarhed)
Dansk standard DS/ISO/IEC 18745-1 1. udgave 2014-03-05 Informationsteknologi Prøvningsmetoder for maskinlæsbare rejsedokumenter (MRTD) og tilhørende udstyr Del 1: Fysiske prøvningsmetoder for pas (holdbarhed)
Ansøgningsskema - Vejledning University of California San Diego
Ansøgningsskema - Vejledning University of California San Diego KILROY education hjælper dig gratis med at søge ind på University of California San Diego. Du får blandt andet information om studietilbud,
Industriel påføring af maling ved pensel, sprøjtepåføring eller dypning
Section 1 Industriel påføring af maling ved pensel, sprøjtepåføring eller dypning Life Cycle Stage End-use Use Descriptors SU SU3 (Industrial) PC PROC(s) PROC 1; PROC 8a; PROC 8b; PROC 5; PROC 10; PROC
Visumansøgninger fra Temarejsers kunder vil blive håndteret af Visumservice ApS.
Visumservice ApS Postboks 815 2100 København Ø VEDRØRENDE VISUM TIL KINA Vi håber, at du glæder dig til den spændende rejse, du har bestilt. Visumansøgninger fra Temarejsers kunder vil blive håndteret
INDHOLD / CONTENT. Opbevaring / Storage 2-5
Side 1 Fascinationen af det simple sommerhusliv, havet, sandet og fyrretræerne er møbeldesigner Søren Rørbæks største inspirationskilde. Fundamentet er gamle skandinaviske møbeltraditioner. Møblerne er