SATCOM Fiber Optic Products
|
|
- Georgiana Mitchell
- 7 years ago
- Views:
Transcription
1 Indoor Applications One Third Rack Card Cage Rack Outdoor Applications C-Band LNA DC-Powered L-Band Link Table Of Contents Ku-Band LNA S-Band LNA Indoor Equipment Page One third rack links One third rack RSU Card cage links 4 & 5 Link specifications 6 & 7 RSU specifications 8 & 9 Outline drawings 6 Options 8 & 9 Outdoor Equipment Page DC-powered L-band links 0 AC-powered links Specifications & Integrated LNAs 4 & 5 Outline drawings 7 Options 8 & 9 AC-Powered Ku-Band Link Advantages Of Fiber Optics Longer transmission paths than coaxial cable Easy installation, lightweight and flexible Fiber is unsusceptible to lightning strikes Provides EMI/I insulation Larger bandwidths
2 One Third Rack Fiber Optic Links Features High dynamic range Low noise figure Compact size Summary alarm contacts Status LEDs Front panel removable Universal AC input (90 50 VAC) Operational to distances over 0 km APC optical connectors Optional level adjust on Rx U.S. Patent 7,50,090 MITEQ s one third rack fiber optic systems are designed to provide state-of-the-art fiber optic links, while reducing rack space requirements. By creating the framework with front panel access to the fiber optic unit, the end user has the flexibility to interchange transmitters and receivers as needed. One third rack systems can be provided in any combination of up to three individual transmitters or receivers spanning all covered satellite bands. One Third Rack Models (frame part number: OL-TR-) Transmitter Model Numbers Receiver Model Numbers Frequency ORT ORM MHz ORT-44- ORM GHz ORT ORM GHz ORT ORM MHz ORT ORM GHz ORT ORM GHz Note: Custom models available upon request. Specifications See pages 6 and 7 for additional specifications. Primary Power Requirements Voltage VAC Frequency Hz Power... W typical Physical Weight Frame....5 lbs. [.68 kg] nominal Transmitter ORT & ORT lbs. [.6 kg] nominal ORT , ORT-44- ORT & ORT lbs. [.7 kg] nominal Receiver ORM & ORM lbs. [.6 kg] nominal ORM , ORM-44- ORM & ORM lbs. [.7 kg] nominal Overall dimensions... 9 x.75 x [48.6 x 44.5 x 04.8 mm] (excluding connectors) Physical (Cont.) Connectors... SMA female Summary alarm... DE-9P (mating connectors supplied) AC input... IEC-0 PIN Configuration PIN Description Summary alarm normally closed Summary alarm normally common Summary alarm normally open 4 N/C 5 RSU power enable 6 N/C 7 N/C 8 + VDC output to RSU 9 + VDC return from RSU Options and Notes : switchover available using NSU controller. See MITEQ data sheet D- for details. See pages 8 and 9 for a list of additional options.
3 One Third Rack Fiber Redundant Switchover Unit Features and optical switching Local and remote control (RS485/4 0/00 Base-T Ethernet) Automatic/manual control from both local and remote control Remote status Off line input APC optical connectors CE mark U.S. Patent 7,50,090 The : Redundant Switchover Unit is used with two one third rack fiber optic units, one on-line (Unit A) and the second in standby mode (Unit B). A fault condition in the on-line unit A, or an operator-generated command will switch the standby Unit B to the on-line position and remove Unit A from the transmission path. A full feature set of commands is available for both remote and local control. The : Redundant Switchover Unit is designed to ensure continuous operation allowing a unit fault to be repaired and/or routine maintenance to be performed without disruption of signal transmission. The : Redundant Switchover Unit can be ordered as an, Fiber or a combination of and Fiber switching system. One Third Rack Models (frame part number: OL-TR-) Models* Switching Fiber Switching Fiber Connector Type OSU-S-TR X N/A OSU-FC-TR X FC/APC OSU-E-TR X E000/APC OSU-SC-TR X SC/APC OSU-S/FC-TR X X FC/APC OSU-S/E-TR X X E000/APC OSU-S/SC-TR X X SC/APC *See page for available one third rack transmitters and receivers. All transmitter and receiver units ordered prior to June 006 need to be retrofitted before accommodating switchover system. See pages 8 and 9 for a list of additional specifications. Additional Information For literature describing local control (front panel) and remote control (remote bus), refer to MITEQ Technical Note 5T067 (
4 Card Cage Fiber Optic Links Features High dynamic range Low noise figure Hot-swappable modules Diode-summed power supplies Ten module capacity in a two rack unit high chassis Summary alarm contacts for each module Status LEDs Front panel removable Universal AC input (90 50 VAC) Operational to distances over 0 km APC optical connectors MITEQ s fiber optic card cage system provides support for multiple transmitter and receiver modules spanning all covered satellite bands. The card cage design allows for the availability of multiple fiber optic links in a two rack unit high chassis, featuring hot-swappable connections, diode-summed redundant power supplies and summary alarm contacts. The card cage can be configured with up to ten receiver modules, five transmitter modules, or any combination of up to ten L-band transmitter and/or receiver modules. Card Cage Components Model Numbers Description OCC- Card Cage Rack PS-OCC-* Power Supply PS-OCC-* Power Supply * Card cage can operate from single power supply, however, two power supplies are needed for redundancy. Card Cage Models Transmitter Model Numbers Receiver Model Numbers Frequency OCCT OCCR MHz OCCT OCCR MHz OCCT-44-* OCCR GHz OCCT * OCCR GHz OCCT * OCCR GHz OCCT * OCCR GHz Note: Custom models available upon request. * Denotes double width models. 4
5 Card Cage Fiber Optic Links Specifications See pages 6 and 7 for additional specifications. Primary Power Requirements Voltage VAC Frequency Hz Power PS-OCC W maximum PS-OCC W maximum Physical Weight Transmitter... lbs. [.6 kg] nominal Receiver... lbs. [.9 kg] nominal Card cage... 4 lbs. [.8 kg] nominall Power supply... lbs. [.6 kg] nominal Overall dimensions... 9 x.5 x 0 [48.6 x 88.9 x 54 mm] (excluding connectors) Connectors... SMA female Summary alarm... DB-5S AC input... IEC-0 Optical... See page 7 See pages 8 and 9 for a list of additional options. Options 5
6 Specifications For Indoor Fiber Optic Links The following specifications are based on link data, with db of optical loss and -0 dbm input level. Electrical Specifications Band L-Band L- and S-Band C-Band Third rack model numbers ORT , ORM ORT-0000-, ORM ORT-44-, ORM-44- Card cage model numbers OCCT , OCCR OCCT-0000-, OCCR OCCT-44-, OCCR-44- Frequency range MHz MHz.4 4. GHz Gain 5 db typical 0 db minimum 0 db typical Amplitude response.5 db p-p maximum ± db p-p maximum Noise Figure 0 db typical 0 db typical, 5 db maximum 0 db maximum (above 0 MHz) Group delay ±0. ns p-p Input power ( db compression point) -4 dbm minimum -5 dbm minimum Third order intermodulation with two -5 dbm inputs -4 dbc -40 dbc Gain stability ±0.5 db/4 hours at constant temperature VSWR ( only).0: maximum.: maximum impedance 50 ohms Phase noise* -00 dbc/hz typical at 00 Hz offset Spurious free dynamic range 00 db minimum at Hz bandwidth Non-damage input +0 dbm +5 dbm * Phase noise is residual phase noise not single sideband. Specification is guaranteed not measured. Electrical Specifications Band Broadband Ku-Band (Rx-Band) Ku-Band (Tx-Band) Third rack model numbers ORT , ORM ORT , ORM ORT , ORM Card cage model numbers OCCT , OCCR OCCT , OCCR OCCT , OCCR Frequency Range GHz GHz GHz Gain db typical 0 db typical Amplitude response ±4 db p-p maximum ± db p-p maximum Noise Figure 0 db typical, 5 db maximum Group delay ±0. ns p-p Input power ( db compression point) -5 dbm minimum Third order intermodulation with two -5 dbm inputs -40 dbc Gain stability ±0.5 db/4 hours at constant temperature VSWR ( only).0: maximum.: maximum impedance 50 ohms Phase noise* -00 dbc/hz typical at 00 Hz offset Spurious free dynamic range 00 db minimum at Hz bandwidth Non-damage input +5 dbm * Phase noise is residual phase noise not single sideband. Specification is guaranteed not measured. 6
7 Specifications For Indoor Fiber Optic Links (Cont.) Optical Specifications Fiber 9/5 (single mode fiber) Optical connector* L- and S-band units FC/APC C- and Ku-band units E000/APC Wavelength** Minimum 00 nm (receivers), 540 nm (transmitters) Typical 550 nm Maximum 560 nm Spectral width.0 nm (transmitter only) Optical power in fiber 4 mw typical Single side-mode suppression ratio 0 db minimum, 40 db typical * Optical connectors are standard connectors for listed bands. Other connectors are available as an option. ** Wavelengths listed are MITEQ s standard. For cases where a CWDM (Coarse Wavelength Division Multiplexing) system is needed, MITEQ can supply up to 0 different transmitter wavelengths with 0 nm channel spacing. Common Environmental Specifications Operating Ambient Temperature... 0 to 50 C Relative Humidity... Up to 95% at 0 C Atmospheric pressure... Up to 0,000 feet Nonoperating Ambient temperature to +60 C Relative Humidity... Up to 95% at 40 C Atmospheric pressure... Up to 40,000 feet Shock and vibration... Normal handling by commercial carriers Functional Block Diagram INPUT C- & Ku- BAND ONLY OPTION LNA TRANS- (PRE- IMPEDANCE AMPLIFIER) AMPLIFIER ISOLATOR OPTICAL CABLE PHOTO DIODE TRANS- IMPEDANCE AMPLIFIER LNA OPTION C- & Ku- BAND ONLY OUTPUT 7
8 Specifications For One Third Rack Switchover Units Modes Of Operations Local mode... Commands are received from the keys on the front panel. Remote mode... Commands are received from a remote system controller via the remote interface connector. All front panel keys are disabled, with the exception of local/remote mode selection. Automatic mode... Switchover occurs if a fault is detected in an on-line unit. Manual mode... Switchover may be executed either via the front panel keys (local mode) or the remote interface (remote mode). Specifications Frequency VSWR (Maximum) Isolation (Minimum) Insertion Loss (Typical) DC GHz.0: 85 db 0.40 db 4 GHz.0: 80 db 0.45 db 4 8 GHz.0: 70 db 0.55 db GHz.40: 65 db 0.65 db Optical Specifications Frequency VSWR (Maximum) Isolation (Minimum) Insertion Loss (Typical) DC 4.5 GHz.0: 60 db.0 db Modes Of Operations Switch type... Coaxial, four-port transfer Switch contacts... Break-before-make, wiping Switch drive... Latching Switching speed ms maximum Optical Switch Specifications Switch type... Optical, x Switch drive... Latching Switching speed... 0 ms maximum Functional Block Diagram ON-LINE FIBER J J4A 4 J7 J4 JA REDUNDANCY ALARM INTEACE CABLE OFF-LINE FIBER UNIT A OFF-LINE J JA 4 J JA ON-LINE O J OPTICAL SWITCH UNIT B REDUNDANCY ALARM INTEACE CABLE J7 SWITCH 8
9 Specifications For : Switchover Units One Third Rack Specifications Primary Power Requirement Voltage... DC power from MITEQ / rack fiber optic Tx and Rx Physical Dimensions (excluding connectors) Module x.48 x [44.78 x 7.59 x 04.8 mm] Frame... 9 x.75 panel height x [48.60 x x 04.8 mm] Weight Module lbs. [.04 kg] nominal Frame....5 lbs. [0.68 kg] nominal Connectors... SMA female Fiber optic... FC/APC, or E000/APC or SC/APC Redundancy alarm*... DE-5P Remote interface*... DE-9S for RS4/485 Ethernet interface... RJ-45 * Mating connectors supplied. PIN Redundancy Connector J7 Description Unit A summary alarm normally open Unit A summary alarm common Unit A summary alarm normally closed 5 Unit A + VDC 7 Unit A + VDC return 9 Unit B summary alarm normally open 0 Unit B summary alarm common Unit B summary alarm normally closed Unit B + VDC 5 Unit B + VDC return PIN Remote Connector J6 Description Ground OSU summary alarm common Data out- 4 OSU summary alarm open 5 Data in- 6 OSU summary alarm closed 7 Data out+ 8 N/C 9 Data in+n 9
10 Features High dynamic range Low noise figure Operational to distances over 60 km Compact size Weather-tight enclosure Summary alarm contacts Status LEDs DC-Powered Outdoor L-Band Fiber Optic Links MITEQ s outdoor L-band fiber optic links are designed for antenna mounting. With a high dynamic range and low noise figure these units provide a low cost alternative to coaxial cable. Their compact size provide an ideal solution for L-band antenna based fiber optic applications. Transmitter And Receiver Models Transmitter Model Numbers Receiver Model Numbers Frequency OWT-0000-* OWR-0000-* MHz OWT OWR MHz * Extended frequency range available, see options. Specifications See pages and for additional specifications. Primary Power Requirements Voltage ±0.5 VDC Noise ripple... <00mV p-p Power Transmitter W typical Receiver W typical Available paint colors: Furniture white (standard)... FED-STD-595B color 7875 Monarch black... FED-STD-595B color 708 Green 8... FED-STD-595B color 4094 Desert tan... FED-STD-595B color 0 Physical Weight... lbs. [.9 kg] nominal Overall dimensions " x.5" x." [7 x 8.55 x.0 mm] Connectors... SMA female Optical... FC/APC (ST/APC optional) Alarm/power... DE-9P (mating connector supplied) PIN PIN Configuration Description Ground +5 VDC input N/C 4 Summary alarm normally closed 5 Summary alarm common 6 Summary alarm normally open 7 N/C 8 N/C 9 N/C See pages 8 and 9 for a list of additional options. Options 0
11 Features High dynamic range Low noise figure Operational to distances over 0 km Compact size Weather-tight enclosure Summary alarm contacts Status LEDs Universal AC input (90 50 VAC) Optional DC output to LNA CE mark AC-Powered Outdoor Fiber Optic Links MITEQ s outdoor AC-powered fiber optic links are designed for antenna mounting. With a high dynamic range and low noise figure these units provide a low cost alternative to coaxial cable. These units are an alternative to MITEQ s DC-powered units. These units are available in all covered satellite bands and are an ideal solution for all antenna-based fiber optic applications. Transmitter And Receiver Models Transmitter Model Numbers Receiver Model Numbers Frequency OWT OWR MHz OWT OWR MHz OWT-44- OWR GHz OWT OWR GHz OWT OWR GHz OWT OWR GHz Specifications See pages and for additional specifications. Primary Power Requirements Voltage VAC Frequency Hz Power* Transmitter... W typical Receiver... 8 W typical * Without LNA option. LNA Optional Power Voltage... + VDC Current ma maximum Available paint colors: Furniture white (standard)... FED-STD-595B color 7875 Monarch black... FED-STD-595B color 708 Green 8... FED-STD-595B color 4094 Desert tan... FED-STD-595B color 0 Physical Weight... 6 lbs. [.7 kg] nominal Overall dimensions " x 5.0" x.78" [86.44 x 7 x 70.6 mm] Physical (Cont.) Connectors... SMA female Optical... FC/APC (ST/APC optional) AC input... MS0R0SL-P (mating connector supplied) Alarm/power... DE-9P (mating connector supplied) PIN PIN Configuration Description Ground N/C Summary alarm normally closed 4 Summary alarm normally open 5 N/C 6 LNA output voltage (optional) 7 N/C 8 Summary alarm common 9 N/C See pages 8 and 9 for a list of additional options. Options
12 Specifications For Outdoor Fiber Optic Links The following specifications are based on link data, with db of optical loss and -0 dbm input level. Electrical Specifications Band L-Band L- and S-Band C-Band Model numbers OWT , OWR OWT-0000-, OWR OWT-44-, OWR-44- OWT , OWR OWT-0000-, OWR Frequency range MHz MHz.4 4. GHz Gain 5 db nominal 0 db nominal 0 db nominal Amplitude response.5 db p-p maximum ± db p-p maximum Noise Figure 0 db typical 0 db typical, 5 db maximum 0 db maximum (above 0 MHz) Group delay ±0. ns p-p Input power ( db compression point) -4 dbm minimum -5 dbm minimum Third order intermodulation with two -5 dbm inputs -4 dbc -40 dbc Gain stability ±0.5 db/4 hours at constant temperature ±5 db/temperature range VSWR ( only).0: maximum.: maximum impedance 50 ohms Phase noise* -00 dbc/hz typical at 00 Hz offset Spurious free dynamic range 00 db minimum at Hz bandwidth Non-damage input +0 dbm +5 dbm * Phase noise is residual phase noise not single sideband. Specification is guaranteed not measured. Electrical Specifications Band Broadband Ku-Band (Rx-Band) Ku-Band (Tx-Band) Model numbers OWT , OWT , OWT , OWR OWR OWR Frequency range GHz GHz GHz Gain db typical 0 db typical Amplitude response ±4 db p-p maximum ± db p-p maximum Noise Figure 5 db maximum Group delay ±0. ns p-p Input power ( db compression point) -5 dbm minimum Third order intermodulation with two -5 dbm inputs -40 dbc Gain stability ±0.5 db/4 hours at constant temperature ±5 db/temperature range VSWR ( only).0: maximum.: maximum impedance 50 ohms Phase noise* -00 dbc/hz typical at 00 Hz offset Spurious free dynamic range 00 db minimum at Hz bandwidth Non-damage input +5 dbm * Phase noise is residual phase noise not single sideband. Specification is guaranteed not measured. Options 4. DC output to LNA for AC-powered units. A. DC output on J connector to power LNA. + VDC available at 500 ma maximum. B. DC output on center pin to power LNA. + VDC available at 00 ma maximum. See pages 8 and 9 for a list of available options.
13 Specifications For Outdoor Fiber Optic Links Fiber Optical connector Wavelength Minimum Typical Maximum Spectral width Optical power in fiber Single side-mode suppression ratio Optical Specifications 9/5 (single mode fiber) FC/APC (standard) ST/APC (optional) 00 nm (receivers), 540 nm (transmitters) 550 nm 560 nm.0 nm (transmitter only) 4 mw typical 0 db minimum, 40 db typical Common Environmental Specifications Operating Ambient Temperature to +60 C Relative Humidity... Up to 00% at 0 C Atmospheric pressure... Up to 0,000 feet Nonoperating Ambient temperature to +70 C Relative Humidity... Up to 00% at 40 C Atmospheric pressure... Up to 40,000 feet Shock and vibration... Normal handling by commercial carriers Functional Block Diagram INPUT C- & Ku- BAND ONLY LNA TRANS- (PRE- IMPEDANCE AMPLIFIER) AMPLIFIER ISOLATOR OPTICAL CABLE PHOTO DIODE TRANS- IMPEDANCE AMPLIFIER LNA C- & Ku- BAND ONLY OUTPUT
14 Integrated LNA With Fiber Optic Transmitter Features SATCOM LNA Fiber optic transmitter High dynamic range Low noise figure Operational to distances over 0 km Compact size Status LEDs Ku-Band S-Band MITEQ s outdoor DC-powered low noise amplifiers with integrated fiber optic transmitters are designed for antenna mounting. These units combine two state-of-the-art technologies. The end user gets all of the performance advantages of MITEQ s SATCOM LNAs plus a fiber optic transmitter all in one package. The transmitter features a high dynamic range and low noise figure while the LNA features a very low noise temperature. These units eliminate the need for multiple housings and are an ideal solution for all antenna-based fiber optic applications. Noise Temperature ( K) LNA Gain (db) Model Number C-Band (.4 4. GHz) 0 50 OTA-C OTA-C 0 60 OTA-C OTA-C4 S-Band (.. GHz) 0 50 OTA-S OTA-S 0 60 OTA-S OTA-S4 Ku-Band ( GHz) OTA-K OTA-K C-Band Specifications See page 5 for additional specifications. Primary Power Requirements Voltage ±0.5 VDC Noise ripple... <00 mv p-p Power... W typical (C-, S-Band),.5 W typical (Ku-Band) Physical Weight... 5 lbs. [.7 kg] nominal Connectors output... SMA female input... CPR9G, grooved flange (C-Band), CPR40, flat flange (S-Band), WR75, flat flange (Ku-Band) Optical... FC/APC (ST/APC optional) Alarm... DE-9P (mating connector supplied: C-, S-Band), MSE0-6P (mating connector supplied: Ku-Band) PIN Configuration PIN DE9P Ground +5 VDC input N/C 4 Summary alarm normally open 5 Summary alarm common 6 Summary alarm normally closed 7, 8, 9 N/C PIN A B D E F MSE0-6P +5 VDC return +5 VDC input Summary alarm normally closed Summary alarm common Summary alarm normally open 4
15 Specifications For Integrated LNA With Fiber Optic Transmitter Electrical Specifications Model numbers OTA-C OTA-C OTA-C OTA-C4 OTA-S OTA-S OTA-S OTA-S4 OTA-K OTA-K Gain 50 db minimum 60 db minimum Gain/Flatness ±0.5 db maximum Pout 0 dbm maximum IP 0 dbm maximum VSWR Input.5: maximum Output.0: maximum Gain variation over temperature 5 db Electrical Specifications For Transmitter Gain LNA Gain -0 db typical Amplitude response ± db p-p maximum (C-, S-Band), ± db p-p maximum (Ku-Band) Noise figure 0 db maximum (C-, S-Band), 5 db maximum (Ku-Band) Group delay ± ns p-p maximum * All specifications for performance of the transmitter imply mating to a receiver. Transmitter will work with any available MITEQ receiver covering the same band. Fiber Optical connector Wavelength Minimum Typical Maximum Spectral width Optical power in fiber Single side-mode suppression ratio Optical Specifications For Transmitter 9/5 (single mode) FC/APC 540 nm 550 nm 560 nm.0 nm 4 mw typical (C-, S-Band), 6 mw typical (Ku-Band) 0 db minimum, 40 db typical Common Environmental Specifications Operating Ambient Temperature to +60 C Relative Humidity... Up to 00% at 0 C Atmospheric pressure... Up to 0,000 feet Nonoperating Ambient temperature to +70 C Relative Humidity... Up to 00% at 40 C Atmospheric pressure... Up to 40,000 feet Shock and vibration... Normal handling by commercial carriers LNA Block Diagram INPUT OUTPUT ISOLATOR TRANS- IMPEDANCE AMPLIFIER OPTICAL OUTPUT 5
16 HAUPPAUGE, NY 4 MODEL ORM HAUPPAUGE, NY MODEL ORT Outline Drawings One Third Rack Links VAC 47-6 Hz ~AC VOLTAGE INPUT FUSE T.5A J SUMMARY ALARM J OPTICAL OUTPUT J INPUT J OUTPUT J OPTICAL INPUT J S U M M A R Y A L A R M FUSE T.5A ~AC VOLTAGE INPUT VAC 47-6 Hz.00 [04.80].7 [4.69] MITEQ INC. POWER FIBER OPTIC RECEIVER SUMMARY ALARM MITEQ INC. SUMMARY ALARM FIBER OPTIC TRANSMITTER THERMAL STABILITY POWER 9.00 R [48.60] Card Cage Links TOP VIEW LESS TOP GUIDE PLATE 9.0 [6.] FRONT VIEW POWER SUPPLY A POWER SUPPLY B.47 [88.4] 9.00 [48.60] 6 NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS.
17 Outline Drawings (Cont.) DC- Powerd L-Band Links C-Band LNA With Fiber 8- TAPPED MOUNTING HOLES 4 PLACES.90 [7.66] J INPUT 4.7 [0.4] FIBER OPTIC TRANSMITTER J DC POWER AND STATUS INTEACE.4 [8.0] ±.0 [.5].0 [76.7] J OPTICAL OUTPUT J OUTPUT J ALARM INTEACE 8.06 [04.7] ±.0 [.5].5 [6.5] POWER/ALARM INDICATOR J FC/APC J 9 PIN D-SUB J SMA FEMALE J OPTICAL OUTPUT STATUS LED.75 [69.85].45 [9.08].57 [6.58] 0 PLACES 4.85 [.9].0 [.0] ±.0 [.5].88 [47.75].880 [98.55].90 [58.7] CPR9 CONTACT FLANGE R.[7.87] 4 PLACES.40 [8.96].690 [68.6].60 [4.48].550 [.97].550 [.97].050 [6.67].550 [9.7].00 [5.4] AC-Powered Links Ku-Band LNA With Fiber AC INPUT FUSE 8.75 [.8] J4 AC INPUT VAC 47-6 Hz J PIN A- AC LINE B- NEUTRAL C- GROUND POWER FUSE ALARM.07 [77.98] 6.6 [68.5] DC POWER/ALARM POWER LED DC POWER ALARM INTEACE ALARM LED J OUTPUT (RECEIVER) J INPUT (TRANSMITTER).6 [9.0] DC POWER/ ALARM INTEACE POWER/STATUS LED OUTPUT 5.00 [7.00].70 [68.50] OPTICAL OUTPUT.7 [8.06].04 [6.4]. [58.80] INPUT 5.87 [49.0] MOUNTING HOLES 0- TAPPED X.50 [6.5] DEEP 4 PLACES J OUTPUT (RECEIVED) J INPUT (TRANSMITTER).45 [6.8] J OUTPUT POWER STATUS LED J OPTICAL OUTPUT J DC POWER/ ALARM INTEACE INPUT.8 [0.57].8 [46.0]. [8.5] 6- TAPPED MOUNTING HOLES S-Band LNA With Fiber.008 [5.60] 4.58 [6.8].795 [70.99] 4.9 [06.45].50 [54.6] WR [09.] 4.60 [6.84] 6.97 [77.08].50 [.7] POWER/STATUS INTEACE STATUS LED INPUT Ø.66 [6.756] THRU C'BORE Ø.5 [.487] X.06 [.5] DP 0X 9 PIN "D-SUB" 5 PIN "D" 4.76 [8.6] [4.986] OUTPUT FIBER OUTPUT SMA FEMALE FC/APC R.5 TYP..78 [9.86].70 [4.688].658 [67.5].440 [87.76].64 [67.06] NOTE: DIMENSIONS SHOWN IN BRACKETS [ ] ARE IN MILLIMETERS. 7
18 Options. Extended frequency range (0 400 MHz).. signal monitor. connector (SMA female) provided on front panel with -0 dbc nominal level. 5. Reference diplexer. A reference diplexer can be added to the side of both the transmitter and receiver. The transmitter side will attenuate the reference signal (0 or 00 MHz) by 5 db and pass the L-band signal. The receiver side will then amplify the reference signal and pass the L-band signal. This prevents saturation of the link due to the presence of the reference signal. Some clipping of the L-band signal may occur at the low end. A. 0 MHz reference diplexer. B. 00 MHz reference diplexer. 0. Level adjust. 0 db minimum, continuous adjustment from front panel knob.. Higher input signal power. The input intercept point can be increased for applications where a higher input power is needed. Input db compression: 0 dbm minimum Input IP : +0 dbm minimum Gain: 0 db nominal Noise figure: db nominal FC. FC/APC optical connector. SC. SC/APC optical connector. E. E000/APC optical connector. ST. ST/APC optical connector. NOTE: Missing option numbers are not applicable to this product. 8
19 Options (Cont.) Available Options Per Unit Model Number Model Option Number Numbers FC E SC ST 4 5A 5B 0 ORT X X X X X ORM X X X X X X ORT X X X X X X ORM X X X X X X X ORT-44- X X X ORM-44- X X X X ORT X X X ORM X X X X ORT X X X ORM X X X X ORT X X X ORM X X X X OCCT X X X X X OCCR X X X X X OCCT X X X X X X OCCR X X X X X X OCCT-44- X X X OCCR-44- X X X OCCT X X X OCCR X X X OCCT X X X OCCR X X X OCCT X X X OCCR X X X OWT X X OWR X X OWT X X X OWR X X X OWT X X X X X X OWR X X X X X X OWT-44- X X OWR-44- X X OWT X X OWR X X OWT X X OWR X X OWT X X OWR X X OWT X X X X OWR X X X X 9
20 For Satellite Communications Typical FO Distribution Architecture INDOOR EQUIPMENT Rx0 Fiber Optic Receiver ORM Ku-Band Block Down Converter SW NSU L-Band IF Output Horizontal Beacon Receiver Optic Distribution Box Rx0 Rx0 Fiber Optic Receiver ORM Fiber Optic Receiver ORM Ku-Band Ku-Band Block Down Converter Block Down Converter 4 : Redundant Switch NSU SW4 4 L-Band IF L-Band IF Output Vertical Modems Fiber Optic Cable Fiber Optic Transmitter ORT L-Band IF SW NSU L-Band IF Input Vertical Fiber Optic Transmitter ORT Fiber Optic Transmitter ORT L-Band IF L-Band IF 4 : Redundant Switch NSU SW4 4 TX0 Uplink Power Control TX0 L-Band IF Input Horizontal Modems Redundant Switch - NSU Fiber Optic Cable OUTDOOR EQUIPMENT Optic Distribution Box Rx5 Rx Rx4 Fiberoptic Rx OWR Fiberoptic Rx OWR Spare Fiber 4 LNA LNA LNA BK Ku TWTA with Integrated BUC Ku TWTA with Integrated BUC Switch Interface Unit V H OMT H V Fiberoptic Rx OWR Ku TWTA with Integrated BUC Spare Fiber MITEQ provides complete custom fiber optic network designs. Our proven FO and SATCOM Solutions are in use worldwide. 00 Davids Drive, Hauppauge, NY 788 TEL.: FAX: D-06E.0 /04.8. Specifications are subject to change without notification. 0 MITEQ
COMMUNICATION PRODUCTS
COMMUNICATION Synthesized Frequency Up- And Downconverters Single-, Dual-, Tri- and Quad-Band High Performance Outdoor Block Converters (:) Redundant LNB System (:) Redundant LNB Controller 9800 Series
More informationHDO700 P FIBRE OPTIC TRANSMITTER
Timo Rantanen 18.1.2011 1(5) HDO700 P FIBRE OPTIC TRANSMITTER HDO700 P is a high performance, extremely linear externally modulated 1550 nm transmitter for HDO fibre optic CATV link. This transmitter type
More informationApplication. Benefits. Contact us. Solution for Indoor TETRA coverage. TETRA/TETRAPOL Repeater RF/OF High Power. To ensure TETRA coverage everywhere
Application TETRA / TETRAPOL coverage enhancement Safety networks Railway, road and waterway tunnels The manufacturer retains the right to modify its products This document is not contractual. AIR Repeater
More information328 Innovation Blvd. 1 Wheaton Road, Witham www.paradisedata.com
Only 3RU rack height Description Paradise Datacom s Indoor, Compact Rack Mount (CRM) series s represent the latest in High Power Microwave Amplifier Technology. The SSPA chassis achieves the highest power
More informationSATELLITE TV on fiber
FSS-95F11T-out SATELLITE TV on fiber Long Distances without loss Prevent Ground Loops Lightning Protection long Distances without loss SATfiber Use fiber when DISH-to-Receiver Distance is over 300ft Place
More informationLight Link Series 2 LT1550. Laser Transmitter with Erbium Doped Fibre Amplifier. Description. Features
Description The Light Link Series 2 optical transmitter model employs a high performance thermally stabilised, DFB, low-chirp, isolated laser to transmit CATV signals. Operating on a specific optical wavelength
More informationOptimux-45, Optimux-45L Multiplexers for 21E1/28T1 over Fiber or T3
Data Sheet Optimux-45, Optimux-45L Up to 28 T1 or 21 E1 channels multiplexed into a single 45 Mbps data stream Any Traffic over Fiber Combination of T1 and E1 channels Transmission over coax or fiber optic
More informationFiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers
Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers Analog Data Links Multi-Channel Contact Closures Multiplexers Digital Data Links - Contact Closures Power Supply
More informationInstruction Sheet ACS-101. General Description. Specifications. Amplified Broadband UHF Combiner-Splitter. Overall. Antenna Splitter.
ACS-101 Amplified Broadband UHF Combiner-Splitter General Description The ACS-101 (Antenna Combiner Splitter 10 to 1) is an amplified and filtered broadband splitter-combiner. It allows up to 10 base stations
More informationF2400 FOM II Series Fiber Optic Modem Technical Manual
F2400 FOM II Series Fiber Optic Modem Technical Manual T1 Revision B Copyright April 2003 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com A030430283T PROPRIETARY DATA All data
More informationModel GS7000 4-Port Node 1 GHz with 40/52 MHz split
Model GS7000 4-Port Node 1 GHz with 40/52 MHz split The Model GS7000 4-Port Node is our latest generation 1 GHz optical node platform and utilizes a completely new housing designed for optimal heat dissipation.
More informationFOMi-E3, FOMi-T3 E3, T3, and HSSI Manageable Fiber Optic Modems
Data Sheet FOMi-E3, FOMi-T3 Extend the range of E3, T3 or HSSI services over fiber optic cables up to 110 km (68 miles) Transparently transmit E3, T3 or HSSI signals over multimode and single-mode fiber
More informationNetScanner System. Toronto: 416 754 7008, Montreal: 514 695 5147, Toll Free:1888 754 7008, Email: sales@a-tech.ca; www.a-tech.ca
Networking Solutions NetScanner System 9IFC/90DB/90DC FEATURES Ethernet Interface for NetScanner System Modules Provides Power and Hardware Trigger Interface 10/100 Base-T Auto-Negotiating Universal AC
More informationAPSYN420A/B Specification 1.24. 0.65-20.0 GHz Low Phase Noise Synthesizer
APSYN420A/B Specification 1.24 0.65-20.0 GHz Low Phase Noise Synthesizer 1 Introduction The APSYN420 is a wideband low phase-noise synthesizer operating from 0.65 to 20 GHz. The nominal output power is
More informationApplication. Key Features. Benefits. Contact us. Solution for GSM-R coverage. AIR Repeater RF/RF GSM-R 900. To ensure GSM-R coverage everywhere
Application GSM-R 900 coverage enhancement Outdoor : Cell extension Indoor : Tunnels and confined areas Key Features Medium & High Power Band- & Channel- Selective Digital Smart Filter Outdoor IP65 cabinet
More informationNAVICOM DYNAMICS RTK BASE STATION INSTALLATION AND COMMISSIONING INSTRUCTIONS
NAVICOM DYNAMICS RTK BASE STATION INSTALLATION AND COMMISSIONING INSTRUCTIONS 1. Locate a suitable position inside the building to install the Base Station enclosure where mains power (240V AC) is available
More informationDVT913 TV CHANNEL CONVERTER
Broadband Cable Networks 1(5) DVT913 TV CHANNEL CONVERTER General DVT913 is a TV Channel Converter for the DVX tend product family. It consists of an input down converter from to, a high selectivity part
More informationOptimux-34, Optimux-25
Data Sheet Optimux-34, Optimux-25 Up to 16 E1/T1 links and high-speed data or Ethernet traffic multiplexed into fiber optic uplink E3 copper uplink for Optimux-34 Single-mode, multimode, single-mode over
More information14.5GHZ 2.2KW CW GENERATOR. GKP 22KP 14.5GHz WR62 3x400V
14.5GHZ 2.2KW CW GENERATOR GKP 22KP 14.5GHz WR62 3x400V UTILIZATION OF GKP 22KP GENERATOR With its characteristics of power stability whatever the load, very fast response time at a pulse, low ripple,
More informationAC3200 INTELLIGENT BROADBAND AMPLIFIER
Kari Mäki 9.4.2013 1(7) AC3200 INTELLIGENT BROADBAND AMPLIFIER AC3200 is the latest leading-edge addition to AC family with extended frequency and gain ranges and integrated electrical controls in both
More informationsat-nms SMU Signal Management Unit
sat-nms SMU Signal Management Unit Application Note 2014, SatService GmbH www.satnms.com SMU-APP-1408-1 1/37 1 System Description and Configuration of sat-nms SMU The sat-nms SMU is the unit you were always
More informationTechnical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar Network Analyzer combines a 90 db wide dynamic range with the accuracy and linearity
More informationOutdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
More informationChassis, Power Supply, and Element Management
Chassis, Power Supply, and Element Management C-COR CHP Max5000 Converged Headend Platform Accelerate deployment of new, revenue generating advanced services Innovative technology creating converged high-
More informationTable Of Contents. Special Options. Specification Definitions. Detailed Data Sheets. Fiber Optic Enclosures. 50 khz - 4.5 GHz LBL Fiber Optic Link
Table Of Contents Special Options Specification Definitions Fiber Optic Links Optical Receivers and Transmitters Detailed Data Sheets 5 khz-2.5 GHz SLL Fiber Optc Link 5 khz - 3 GHz LBL Fiber Optic Link
More informationUser Guide Ku Band Solid State Amplifiers SSPA Redundant Configuration
User Guide Ku Band Solid State Amplifiers SSPA Redundant Configuration Outdoor Band Solid State Amplifier System Redundant Configuration User Guide This section provides general information for the UPCOM
More informationLT-82 Stationary IR Transmitter
LT-82 Stationary IR Transmitter Configuration LT-82-0 (North America) LT-82-02 (Asia, UK) LT-82-03 (Euro) The Listen LT-82 is the heart of a stationary IR listening system. It takes the desired audio signal
More informationPositive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
More informationHIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
More informationApplication. Benefits. Contact us. Solution for Mobile TV coverage. Optical Repeater RF/OF DVB-T/-H/-T2 & ISDB-T
Application DVB-T/-H/-T2 & ISDB-T coverage enhancement Railway, road and waterway tunnels The manufacturer retains the right to modify its products This document is not contractual. AIR Repeater is a trademark
More informationStand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation
Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT
More informationCompany Profile. Company Description. Quality Assurance. Design Capabilities and Applications Support
Company Profile Company Dow-Key Microwave Corporation, the world's largest manufacturer of electromechanical switches, is part of Ceramic & Microwave Products - a subsidiary of Dover Corporation. Dover
More informationR&S SMZ Frequency Multiplier Specifications
Test & Measurement Data Sheet 02.00 R&S SMZ Frequency Multiplier Specifications CONTENTS Definitions... 3 Specifications... 4 RF performance...4 Frequency...4 Level...4 Spectral purity...4 Connectors...5
More informationHSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
More informationAPC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out
APC Matrix-UPS 5kVA 208V/240V In 120/208/240V Out APC Matrix-UPS, 3750 Watts / 5000 VA,Input 208V / Output 120V, 208V, Interface Port DB-9 RS-232, SmartSlot, Extended runtime model Includes: CD with software,
More informationThyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
More informationI STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON
More informationResearch RF Sputtering Packages
Research RF Sputtering Packages Shown with 3" Polaris Adjustable Position Source with Tilt and Shutter 300 or 600 Watt Low Cost Packages for Those With Limited Budgets Desiring Full Capability 13.56 MHz
More informationM-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification
M-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification Document ID: SL.RD.04.002.150723 July 2015 Revision: 001 ATTENTION ELECTROSTATIC SENSITIVE
More informationTechnical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5
Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis
More informationApplications. Key Features. Benefits. Contact us. Solution for TETRA coverage. AIR Repeater TETRA / TETRAPOL 400 RF/RF
Applications TETRA / TETRAPOL 400 MHz coverage enhancement Outdoor : Mountainous areas, Industrial plants Indoor : Confined areas Key Features Output power up to 5W IP65 Wall- or mast-mounting Squelch
More informationOptimux-1553 Fiber Multiplexers for 3 E3/T3 over STM-1/OC-3
Where to buy > See the product page > Data Sheet Optimux-1553 STM-1/OC-3 terminal multiplexer for grooming high-order legacy traffic (TDM) over SDH/SONET networks Up to three E3 or T3 data channels multiplexed
More informationTACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI Standards
This data sheet contains controlled technical data that has been cleared for public release by the U.S. Government under ITAR Exemption 22CFR 125.4(b)(13). TACTICAL FIBER OPTIC MODEMS U.S. Army and ANSI
More information5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer TV EQUIPMENT
The VHF/UHF Dual cast Digital Transposers/ Digital Transmitters set new standards for ATV and DVB-T transposer and transmitter technology by combining top performance with an extensive number of features
More informationiva Cable & Antenna Analyzer
iva Cable & Antenna Analyzer VSWR, Return Loss Measurement & Distance to Fault The iva Series Cable & Antenna Analyzer is an exciting new product from Kaelus that enables users to accurately measure VSWR/return
More information33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
More informationETL Systems. RSSC Dubna July 2014. Global Leaders in Satellite RF Engineering & Custom Build ROUTE AMPLIFY SPLIT SWITCH
ETL Systems RSSC Dubna July 2014 Global Leaders in Satellite RF Engineering & Custom Build Heritage Custom Build & Design Specialist RF equipment for 25 years 80% International Sales 75 staff in 3 global
More informationINPUT SWITCH OPTIONS:
RSS6-T RF Channel & Broadband Automatic Switching Station info@tekronsystems.com www.tekronsystems.com 1/7 INTRODUCTION The RSS6-T is designed for the redundancy of analog and QAM RF channels, as well
More informationAPPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS. RJ12 connectors
APPENDIX APPENDIX A PIN-OUT OF RJ12 / RJ45 CONNECTORS RJ12 connectors Pin # 1 Signal Name Not Used 2 +TR Description + Data Line 3 +R Remote OFF Required or Remote OFF control 4 -TR 5 Not Used 6 RTN -
More informationAmplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B) 1. Description and Specifications Contents 1.1 Description 1.2 1.2 Specifications 1.3 1.3 Tested parameters in production
More informationHIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
More informationWaveReady CFM. Optical Link Monitoring System: Continuous Fiber Monitor
WaveReady CFM Optical Link Monitoring System: Continuous Fiber Monitor www.lumentum.com Data Sheet The Lumentum Continuous Fiber Monitor (CFM) offers a compact, modular solution for performance monitoring
More informationCisco Model DPC3010 DOCSIS 3.0 8x4 Cable Modem
Cisco Model DPC3010 DOCSIS 3.0 8x4 Cable Modem The Cisco Model DPC3010 DOCSIS 3.0 8x4 Cable Modem (DPC3010) provides DOCSIS broadband service providers with a cost-effective solution for delivering high-speed
More informationSpectraTec II. Polarized Multi-Laser Source BLUE SKY RESEARCH WAVELENGTHS. The SpectraTec II
BLUE SKY RESEARCH The SpectraTec II, two wavelength laser module is a highly integrated system comprised of two lasers, individual driving and temperature control electronics, wavelength combining, and
More informationPrisma IP 10 GbE VOD Line Card
Digital Transport Prisma IP 10 GbE VOD Line Card Description The Prisma IP 10 GbE Line Card family of products consists of Transmitter (OTX), Receiver (ORX), and Transceiver (OTR) modules. These modules
More informationUSER MANUAL MODEL 2300M SERIES. OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M)
USER MANUAL MODEL 2300M SERIES OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M) An ISO-9001 Certified Company Part# 07M2300M Doc# 077321U Rev. A Revised 4/14/03 SALES OFFICE (301) 975-1000
More informationBROADCAST Trasmettitori / Transmitters DBH3 GAP FILLER
INTRODUCTION The equipment described here below is a TRANSMITTER that allows to receive a signal coming from satellite, to demodulate it to have the ASI format, to present it into DVB-H standard by a DVB-H
More information10/100/1000 Base-T to Gigabit Fiber Media Converter
10/100/1000 Base-T to Gigabit Fiber Media Converter Operation Manual DA-MC1101 Powered by Before Using the Product FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation
More informationVoltage Regulator SPAU 341 C. Product Guide
Issued: July 1998 Status: Updated Version: D/25.04.2006 Data subject to change without notice Features Comprehensive voltage regulation for power transformers with on-load tapchangers in distribution substations
More informationMicrocor Wireless Transmitter (MWT)
Rohrback Cosasco Systems, Inc. Microcor Wireless Transmitter (MWT) Features: Highly Secure and Reliable Self Organizing Wireless Mesh Network High Resolution Metal Loss Measurement for all process environments
More informationZMR 80 STEREO MODULAR ZONER USERS MANUAL
ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it
More informationPD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
More informationLoop-O9310 4E1 or 4T1 Fiber Optical Mux
Loop-O930 E or T Fiber Optical Mux Features CPU Version Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35,
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationPower Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
More informationSubstation Automation Products Relion 670/650 series IEC and ANSI Hardware
Substation Automation Products Relion 670/650 series IEC and ANSI Hardware ABB Group 1MRG014097 October 2013 Relion 670/650 series hardware Contents Relion 670/650 series Relion Hardware Relion Common
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More information1701/22 FieldMonitor Management Interface Module
1701/22 FieldMonitor Management Interface Module Bently Nevada Asset Condition Monitoring Description The 1701/22 FieldMonitor Management Interface Module (FMIM) is a highlyintegrated module that provides
More informationMASW-000823-12770T. HMIC TM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications. Features. Functional Diagram (TOP VIEW)
Features Exceptional Loss = 0.35 db Avg @ 2025 MHz, 20mA Exceptional Loss = 0.50 db Avg @ 2025 MHz, 20mA Higher - Isolation = 31dB Avg @ 2025 MHz, 20mA Higher RF C.W. Input Power =13 W C.W.(-Ant Port)
More informationSELECTION GUIDE INPUT CHARACTERISTICS. Voltage set point accuracy. Overall voltage error. Temperature coefficient of output voltage (slope)
OBSOLETE NMPD0 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Efficiency (Min.) Power (Max.) V V % W NMPD003C 3. 9.50 NMPD005C 5. 9.5 NMPD0C. 0 0.00 NMPD05C 5. 9 0.00 FEATURES RoHS
More informationTOTALLY SOLID STATE NON-DIRECTIONAL RADIO BEACONS 190-535 khz
TOTALLY SOLID STATE NON-DIRECTIONAL RADIO S 190-535 khz This family of radio transmitters has been developed as extremely efficient, highly reliable Non Directional Beacons. ND2000A/4000A» MODULAR CONSTRUCTION»
More informationIRT Eurocard. Type DAX-3206. Audio Extractor for 270 Mb/s SDI
I R T Electronics Pty Ltd A.B.N. 35 000 832 575 26 Hotham Parade, ARTARMON N.S.W. 2064 AUSTRALIA National: Phone: (02) 9439 3744 Fax: (02) 9439 7439 International: 61 2 9439 3744 61 2 9439 7439 Email:
More informationAMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE
AMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE Thank you for purchasing your Amplified High Speed Fiber Photodetector. This user s guide will help answer any questions you may have regarding the
More informationA compact, lightweight, portable optical spectrum analyzer for DWDM system installation and maintenance.
A compact, lightweight, portable optical spectrum analyzer for DWDM system installation and maintenance. Bulletin -01E http://www.yokogawa.com/tm/... Visit our website to sign for e-mail updates Compact,
More informationOptimux-1551 Fiber Multiplexer for 63E1/84T1 over STM-1/OC-3
Data Sheet Optimux-1551 STM-1 or OC-3 terminal multiplexer providing access to SDH and SONET networks Any Traffic over Fiber Multiplexes 21/42/63 E1 or 28/56/84 T1 data channels over a single link, providing
More informationBASICS OF C & Ku BAND TRANSMISSIONS & LNBs
Page 1 of 6 BASICS OF C & Ku BAND TRANSMISSIONS & LNBs A satellite broadcasts a few watts of microwave signals from the geostationary orbit 36,000 kilometers above the earth. The transmissions are also
More informationiva Cable & Antenna Analyzer
iva Cable & Antenna Analyzer VSWR, Return Loss Measurement & Distance to Fault The iva Series Cable & Antenna Analyzer is an exciting new product from Kaelus that enables users to accurately measure VSWR/return
More informationFOM-5A, 6A. Asynchronous Fiber Optic Modem
FOM-5A, 6A Asynchronous Fiber Optic Modem FEATURES Asynchronous transmission at up to 19.2 kbps Transmission range up to 3 km (1.8 mi), regardless of data rate Full- or half-duplex Transfers one control
More informationR&S ZVA Vector Network Analyzer Specifications
www.atecorp.com 8-44-ATEC (2832) R&S ZVA Vector Network Analyzer Specifications ZVA_dat-sw_en_523-568-22_v_cover.indd Data Sheet. E stablished 98 Advanced Test Equipment Rentals Test & Measurement 4.5.22
More informationOptimux-134, Optimux-125
Optimux-134, Optimux-125 Up to 16 E1/T1 links, full bandwidth 100 Mbps Ethernet traffic and high-speed data multiplexed into fiber optic uplink 34/25 Mbps or 134/125 Mbps operation s Single-, multi, single-
More informationMICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
More informationGigabit Ethernet Copper-to-Fiber Converters
Gigabit Ethernet Copper-to-Fiber Converters GFT-10XX Standard multi-mode & single-mode 1000BASE-T GFT-1055E Extended Reach Multi-Mode over standard fiber GFT-1037A/B Single-Fiber, Bi-Directional Single-Mode
More informationJITAI Technology Co., LTD. Your 1 st Partner. Product Catalog. Microwave Passive Device Design and Manufacture
Technology Co., LTD. Your 1 st Partner Product Catalog Microwave Passive Device Design and Manufacture CONTENTS Rotary Joints Single Channel Rotary Joints Microwave Passive Device Design and Manufacture
More informationCross-beam scanning system to detect slim objects. 100 mm 3.937 in
891 Object Area Sensor General terms and conditions... F-17 Related Information Glossary of terms... P.1359~ Sensor selection guide...p.831~ General precautions... P.1405 PHOTO PHOTO Conforming to EMC
More informationHow To Use A Ds340 (Dsp)
Ideal for monitoring dust levels in the exhaust gas of industrial combustion or air filtration processes. Innovative Dynamic Detection Principle (DDP) measurement technique Immune to gradual reductions
More informationHow To Use A Sound Card With A Subsonic Sound Card
!"## $#!%!"# &"#' ( "#' )*! #+ #,# "##!$ -+./0 1" 1! 2"# # -&1!"#" (2345-&1 #$6.7 -&89$## ' 6! #* #!"#" +" 1##6$ "#+# #-& :1# # $ #$#;1)+#1#+
More information2398 9 khz to 2.7 GHz Spectrum Analyzer
Spectrum Analyzers 2398 9 khz to 2.7 GHz Spectrum Analyzer A breakthrough in high performance spectrum analysis, combining cost effectiveness and portability in a new lightweight instrument 9 khz to 2.7
More informationETL Systems. RSCC Dubna July 2015. Global Leaders in Satellite RF Engineering & Custom Build ROUTE AMPLIFY SPLIT SWITCH
ETL Systems RSCC Dubna July 2015 Global Leaders in Satellite RF Engineering & Custom Build Heritage Custom Build & Design Specialist RF equipment for 25 years 80% International Sales 95 staff in 3 global
More informationOptimux-134, Optimux-125
Data Sheet Optimux-134, Optimux-125 Up to 16 E1/T1 links, full bandwidth 100 Mbps Ethernet traffic and high-speed data multiplexed into fiber optic uplink 25/34 Mbps or 125/134 Mbps operation s Single-,
More informationZlinx Wireless I/O. Peer-to-Peer and Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION
Modular, Customizable Wire Replacement 128 / 256 Bit AES Encryption Software Selectable RF Transmit Power Software Selectable Over-the-air Data Rate Modbus ASCII /RTU Compatible Wide Operating Temperature
More informationNC-12 Modbus Application
NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1
More informationTelephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
More informationModular I/O System Analog and Digital Interface Modules
OPERATING INSTRUCTIONS Modular I/O System Analog and Digital Interface Modules Installation Operation Maintenance Document Information Document ID Title: Operating Instructions Modular I/O System Part
More informationLoop-O9310 4E1 or 4T1 Fiber Optical Mux
Loop-O930 E or T Fiber Optical Mux Features Up to E or T links on one fiber Optical + protection 0/00 BaseT Ethernet Bridge mode, maximum transmission bandwidth 22Mbps (optional) One V.35, X.2, RS9/V.36,
More informationAC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
More informationFeatures. Applications. Description. Blockdiagram. K-LC1a RADAR TRANSCEIVER. Datasheet
Features 24 GHz K-band miniature transceiver 180MHz sweep FM input (n.a. for K-LC1a_V2) Dual 4 patch antenna Single balanced mixer with 50MHz bandwidth Beam aperture 80 /34 15dBm EIRP output power 25x25mm
More informationMTR3000 BASE STATION / REPEATER & SATELLITE RECEIVER
THE FUTURE OF BUSINESS COMMUNICATION, DELIVERED TODAY MTR3000 BASE STATION / REPEATER & SATELLITE RECEIVER The MTR3000 is a robust, high powered base station / repeater that offers reliability, future
More informationST Series POWER SUPPLIES USER INSTRUCTIONS
Introduction These instructions detail the installation and operation requirements for the ST20 & ST35 power supplies. These have been designed for operation in RV s providing a DC power system, with optional
More informationCompact EGC Amplifier Model 93251
RF Electronics Compact EGC Amplifier Model 93251 Description The Compact Electronic Gain Control (EGC) Amplifier Model 93251 combines powerful performance with ease of use to meet the growing demands from
More informationCisco Model EPC2100 EuroDOCSIS 2.0 Cable Modem
Cisco Model EPC2100 EuroDOCSIS 2.0 Cable Modem The Cisco Model EPC2100 EuroDOCSIS 2.0 Cable Modem provides EuroDOCSIS broadband network operators with a cost-effective solution for delivering standardsbased,
More information