FUJITSU Cloud IaaS Trusted Public S5 Connecting to a Virtual Machine (VM)

Transcription

1 FUJITSU Cloud IaaS Trusted Public S5 Connecting to a Virtual Machine (VM) This guide describes the process for connecting to a IaaS Trusted Public S5 Virtual Machine Each Virtual System provides the ability to establish a SSL-VPN tunneled connection between the Users workstation, over the Internet, to a particular Virtual System Network Tier (vnet) of choice. The Workstation is then assigned an IP Address from the VNET subnet, allowing routing of traffic including RDP and SSH, with the Virtual Servers. Only one connection can be established at a time, with the user required to disconnect the connection, before re-establishing a further connection to alternative destination, be it either within the same contract or different contract. How to Set Up a VPN Connection The following procedure explains how to log-in to a VM by using the vsys SSL-VPN functionality. 1. Select the System Manager from the Startup menu. After System Manager is opened, select the required Virtual System and click the Details button. The System Details window is then displayed. 2. Select the required VM and click the VPN Connection button. Figure 1 Connect to a VM Figure 2 Connect to a VM Date: 31/01/2015 Page 1 of 12

2 3. Select the Network Segment containing the VM and click the Connect button. Figure 3 Connect to a VM 4. Enter a User Name and Password at the SSL-VPN Login screen. Figure 4 Connect to a VM Note: The User Name and Password are the same as those for Service Portal Login. 5. Confirm the Active-X add-on (This only occurs for the first connection only) Figure 5 Connect to a VM Date: 31/01/2015 Page 2 of 12

3 6. When the screen confirming an execution of the Active-X add-on is displayed, install it from the message area. Figure 6 Connect to a VM 7. Install the Active-X control Figure 7 Connect to a VM 8. Agree to the Access Point Server by clicking the Agree button When above screen is displayed, the connection is establishing properly. Figure 8 Connect to a VM Figure 9 Connect to a VM Date: 31/01/2015 Page 3 of 12

4 When connected, the screen will return to the below screen and the SSL-VPN Connected balloon will be displayed for short period. Figure 10 Connect to a VM After the connection is established, log-in to the VM via Windows Remote Desktop Connection and SSH. How to Disconnect from a VM The following procedure explains how to disconnect a SSL-VPN connection. Always disconnect the SSL-VPN connection after use. 1. Double-click or right-click the SSL-VPN connection on the taskbar and select Status Figure 11 Connect to a VM Date: 31/01/2015 Page 4 of 12

5 2. Click the Disconnect button in the SL-VPN Connection dialogue box. 3. When the status shows Disconnect, click the Logout button. Figure 12 Connect to a VM Figure 13 Connect to a VM Date: 31/01/2015 Page 5 of 12

6 How to Connect to a Windows VM The following procedure explains how to connect to a Windows virtual machine using Remote Desktop (RDP). 1. Click Start, All Programs, Accessories and then Remote Desktop Connection or enter MSTSC into the run menu and double click the resulting MSTSC.exe file. Figure 14 Connect to a VM 2. From this front screen, click the drop-down Options button. Figure 15 Connect to a VM The Computer is the IP address of the target VM. The User name is Administrator. 3. Once the Computer and User name are set, click the Local Resources tab. Figure 16 Connect to a VM The Local Resources tab enables the VM access to the client PC s Hard Drives, Printers and Clipboard etc. Date: 31/01/2015 Page 6 of 12

7 4. Click the More button. Figure 17 Connect to a VM 5. Click the + button to open up the list of drives and check all those that will be required by the VM and click the OK button. Figure 18 Connect to a VM Date: 31/01/2015 Page 7 of 12

8 6. Click the Connect button Figure 19 Connect to a VM 7. Click Connect again at the confirmation screen 8. Enter the password to access the VM and click the OK button. Figure 20 Connect to a VM Figure 21 Connect to a VM Date: 31/01/2015 Page 8 of 12

9 9. The VM password is found by clicking the Initial PW button of the VM screen. 10. Click Yes at the certification screen. Figure 22 Connect to a VM Figure 23 Connect to a VM Once the connection has established, the Windows desktop should appear. Figure 24 Connect to a VM Date: 31/01/2015 Page 9 of 12

10 How to Connect to a Linux VM The following procedure explains how to connect to a CentOS virtual machine, although the instructions are the same for other flavors of Linux on the platform. For a CentOS machine, an external client such as VNCViewer, or PuTTY can be used. For this guide, we are using PuTTY. Available from here 1. Ensuring the VM is powered on before starting 2. Double click putty.exe to open the console, then enter the IP address of the Linux VM to connect to, then click Open Figure 25 Connect to a Linux VM If this is the first time the VM has been accessed, then the following Security Alert will be displayed. Click Yes to accept the warning. Figure 6 Connect to a CentOS Virtual Machine Figure 26 Security Alert Dialogue Box Date: 31/01/2015 Page 10 of 12

11 3. The resulting console window, prompts you to supply the administrative username and password for the VM. Figure 27 Login Prompt to CentOS VM The VM password can be found by clicking the Initial PW button with the VM selected, within the Portal. Figure 30 Connect to a VM Figure 28 Initial PW Display Button Date: 31/01/2015 Page 11 of 12

12 4. Enter the username as root and password as shown in the Portal Dialogue Box. The above screen shows the result of a successful login. Figure 29 Successful login Contact IaaS Trusted Public Team FUJITSU GlobalCloud@uk.fujitsu.com Website: uk.fujitsu.com All rights reserved, including intellectual property rights. Technical data subject to modifications and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/ or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. Copyright Fujitsu Service Limited 2015 Date: 31/01/2015 Page 12 of 12