Autodesk Inventor Publisher Essentials
|
|
- Kathlyn Simmons
- 7 years ago
- Views:
Transcription
1 Autodesk Inventor Publisher Essentials Course Length: 1 day The Autodesk Inventor Publisher Essentials training course instructs students in best approaches for creating technical documentation using the Autodesk Inventor Publisher software. Through a hands-on, practice-intensive curriculum, students acquire the knowledge needed to create accurate and compelling documentation, and to publish it in a variety of supported formats. The training course progresses from the initial planning phase, in which you begin by reading in all of the source data and then adding the necessary annotations to create the product documentation. Publishing is the final step in the workflow. It enables you to take your authored Autodesk Inventor Publisher software documents, storyboards, or snapshots and save them in formats that can be opened by the intended users of the documentation. Single or multiple chapters are dedicated to each of these phases. To further practice the entire workflow, a project exercise has been included that only provides high level guidance to complete a project. The final chapter in the training course covers the Autodesk Inventor Publisher Mobile (IPM) Viewer application that enables you to interactively view animated 3D assembly instructions that have been created with the Autodesk Inventor Publisher software. Topics Covered Describe the main features, functionality and workflow of the Autodesk Inventor Publisher software. Open and create documents. Course description shown for Autodesk Inventor 2016.Topics, curriculum, and/or prerequisites may change depending on software version.
2 Learn to work with the Autodesk Inventor Publisher software s interface. Pre-plan and outline a project to meet product documentation requirements. Document your product using the Autodesk Inventor Publisher software s authoring tools to create and annotate accurate, descriptive, and compelling storyboards. Play a completed presentation and optimize the presentation for animated formats. Publish your authored documents, storyboards, or snapshots and save them in formats that can be opened by the intended users of the documentation. Use the Autodesk Inventor Publisher Mobile (IPM) Viewer app to interactively view the animated 3D assembly instructions created with the Autodesk Inventor Publisher software. Prerequisites As an introductory training course, Autodesk Inventor Publisher Essentials does not assume prior knowledge of any 3D modeling or CAD software. Students need to be experienced with the Windows operating system and a background in drafting 3D parts and modeling terminology is recommended. Training Course Contents Chapter 1: Autodesk Inventor Publisher Overview Lesson: What is Autodesk Inventor Publisher? Lesson: Why Use Autodesk Inventor Publisher? Lesson: Workflow Overview Lesson: Performance and Capacity Tips Chapter 2: Pre-Authoring Lesson: Interface Overview Lesson: Pre-Authoring Lesson: Getting Started Lesson: Importing CAD Data Lesson: Publish Area Lesson: Working with Associative Files Exercise: Creating and Opening Existing Files
3 Chapter 3: Authoring I - Basic Authoring Lesson: Setting up your Story Exercise: Set up a story Lesson: Selecting Components Lesson: Moving Components Lesson: Creating Trail Lines Lesson: Component Visibility Exercise: Selecting and Moving Components Lesson: Changing Your Viewpoint Lesson: Modifying Snapshots Exercise: Modifying Viewpoints and Snapshots Lesson: Play Presentation Exercise: Play the Storyboard Chapter 4: Authoring II - Model Appearance Lesson: Background Appearance Lesson: Component Appearance Exercise: Background and Component Appearance Lesson: Sectioning Components Exercise: Creating Section Views Lesson: Detail Views Exercise: Creating Detail Views Chapter 5: Authoring III - Annotations Lesson: Dimensions Lesson: Callouts and Labels Lesson: Parts Lists Lesson: Additional Annotations Exercise: Creating Annotations Lesson: Optimizing for Animations Exercise: Finishing your Animations Chapter 6: Publishing Lesson: Publishing Overview Lesson: Publishing Documents Lesson: Inventor Publisher Word Add-In Lesson: Publishing Image Files Lesson: Publishing Animations Lesson: Interactive 3D Publishing
4 Chapter 7: Project Exercise Appendix A: Mobile Viewer Lesson: Overview of the IPM Viewer Lesson: Accessing Files on a Mobile Device Lesson: Manipulating Files in the Mobile Viewer
5 Cancellation Policy The following cancellation policy shall apply to all training engagements, Live Online, Consulting Services and Dedicated/ Custom Training: Company reserves the right to reschedule or cancel the date, time and location of its class at any time. In the event that a Training Class is cancelled by Company, Customer is entitled to a full refund. Company shall not be responsible for any other loss incurred by Customer as a result of a cancellation or reschedule. For Customer cancellations when written notice is received (i) at least ten (10) business days in advance of the class, the Customer is entitled to a full refund of its payment or reschedule enrollment, (ii) less than ten (10) business days, Customer shall not be entitled to a refund, but shall receive a class credit to be used within three (3) months of the date of the original class. Student substitutions are acceptable with at least two (2) days prior notice to the class, provided substitution meets course prerequisites and is approved by Company s Training Coordinator (trainingcoordinator@rand.com) For all Training orders, cancellation notices must be submitted to trainingcoordinator@rand.com. Company is not responsible for any error in the delivery of the notice. In the event of any reschedule of Consulting Services and/or Dedicated/Custom Training by Customer, Company will invoice Customer for all non-cancellable travel expenses. For full terms and conditions, go to imaginit.com/trainingtc. To request more information or to see training locations, visit imaginit.com/contact.
Revit and BIM for Facilities Management
Revit and BIM for Facilities Management Course Length: 1 day Revit and BIM for Facilities Management is a one day hands-on workshop that will introduce you to what Building Information Modeling is and
More informationBlended Learning: Revit Collaboration Tools
Blended Learning: Revit Collaboration Tools Course Length: 1 week Autodesk Revit is a Building Information Modeling (BIM) tool, which can be used by more than one person working on a new project. This
More informationAutoCAD Electrical Fundamentals - NFPA Course Length: 3 days
AutoCAD Electrical Fundamentals - NFPA Course Length: 3 days The AutoCAD Electrical Fundamentals training course (three days) covers the indispensable core topics for working with the AutoCAD Electrical
More informationCreo Illustrate 3.0. Curriculum Guide
Creo Illustrate 3.0 Curriculum Guide Live Classroom Curriculum Guide Introduction to Creo Illustrate 3.0 Introduction to Creo Illustrate 3.0 Overview Course Code Course Length TRN-4415-T 1 Day In this
More informationWeek 15 - Lecture Manufacturing and Service. ME 24-688 Introduction to CAD/CAE Tools
Week 15 - Lecture Manufacturing and Service Lecture Topics CNC Manufacturing Product Documentation Autodesk Inventor Publisher Future of Design Review Course Summary Product Lifecycle Week 15 Requirements
More informationSOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS
SOLIDWORKS CAD Software Training Catalog COURSES FOCUS ON FUNDAMENTAL SKILLS AND CONCEPTS KEY TO INSURING SUCCESS SOLIDWORKS CAD Software Course Index Course Number Course Title Course Length 100 SOLIDWORKS
More informationPro/INTRALINK 9.0/9.1 Curriculum Guide
Pro/INTRALINK 9.0/9.1 Curriculum Guide NOTE: For a graphical depiction of the curriculum based on job role, please visit this page: http://www.ptc.com/services/edserv/learning/paths/ptc/proi_90.htm Web
More informationRevit MEP. Autodesk Navisworks
What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout
More informationTable of Contents. Introduction. Audience. At Course Completion. Prerequisites
Table of Contents Introduction Audience At Course Completion Prerequisites Microsoft Certified Professional Exams Student Materials Course Outline Introduction This one-day course explores the Microsoft
More informationCustomer Service in Microsoft Dynamics CRM 2013 80545A; 1 Day; Instructor-led
Customer Service in Microsoft Dynamics CRM 2013 80545A; 1 Day; Instructor-led Course Description This course focuses on how an organization can nurture customer satisfaction through automation of business
More informationCopyright 2005-2010 Soleran, Inc. esalestrack On-Demand CRM. Trademarks and all rights reserved. esalestrack is a Soleran product Privacy Statement
More information
Structural BIM Technology Certificate Program
Structural BIM Technology Certificate Program Program Description 160 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology Certificate Awarded STRUCTURAL
More informationTraining Agendas and Pricing
Training Agendas and Pricing Contents 1 Relativity Training Overview... 3 2 Relativity Administrative Training... 5 3 Relativity Analytics Training... 8 4 Relativity Assisted Review Training... 10 5 Relativity
More informationINDIANA AREA SCHOOL DISTRICT SECONDARY
INDIANA AREA SCHOOL DISTRICT SECONDARY Course Title: Robotics Engineering I Grade Level: 9-12 Course Number: 642 Core or Elective: Elective Periods Per Week: 5 Length of Time: 39 minutes / 1 period Length
More informationCoCreate OneSpace.net 3D CAD Conversion
CoCreate 3D This document contains the individual conversion specifications Table of Contents CATIA V4 4.2 to conversion Unigraphics NX2 to conversion Pro/E Wildfire to conversion I-DEAS MS10 to conversion
More informationColumbus State Community College Construction Science and Engineering Technology Department Mechanical Engineering Technology
Columbus State Community College Construction Science and Engineering Technology Department Mechanical Engineering Technology COURSE: Mech 1145 CAD I Semester: Spring 2014 Instructor: Shane Bendele Phone:
More informationENGINEERING, TECHNOLOGY, AND DESIGN
ENGINEERING, TECHNOLOGY, AND DESIGN The Engineering, Technology and Design Department fosters student learning that will develop 21st century competencies in a constantly changing technological environment.
More informationDigital Arts (Visualization) Technology Certificate Program
Digital Arts (Visualization) Technology Certificate Program Program Description 184 Course Hours of Instruction Program Completion Time - 9 Months Upon Completion VDCI Technology Certificate Awarded DIGITAL
More informationCreating 2D Drawings from 3D AutoCAD Models
Creating 2D Drawings from 3D AutoCAD Models David Piggott CrWare, LP GD205-2P This class explores the various techniques in creating 2D part and assembly drawings from 3D AutoCAD models. As part of the
More informationSMARTEAM FUNDAMENTALS V5 R19
SMARTEAM FUNDAMENTALS V5 R19 Length 1 Day Objectives of the course Upon completion of this course you will be able to... - Understand the basics of PLM and ENOVIA SmarTeam. - Understand how ENOVIA SmarTeam
More informationNote: This App is under development and available for testing on request. Note: This App is under development and available for testing on request. Note: This App is under development and available for
More informationTechnical What s New. Autodesk Alias Product Line
Autodesk Alias Product Line Purpose-built for industrial designers and creative professionals, digital modelers/sculptors, and automotive/transportation designers, the Autodesk Alias 2010 product line
More information8913, Applications in Microsoft Dynamics CRM 4.0
8913, Applications in Microsoft Dynamics CRM 4.0 Duration: 3 Days of Training Course Description This three-day instructor-led course, Applications in Microsoft Dynamics CRM 4.0, provides students with
More informationOracle Education @ USF
Oracle Education @ USF Oracle Education @ USF helps increase your employability and also trains and prepares you for the competitive job market at a much lower cost compared to Oracle University. Oracle
More informationCurriculum Path & Training Guidelines
Curriculum Path & Training Guidelines Intergraph recommends that SmartPlant Foundation (SPF) users select one of the following training tracks described below. 1. SPF Administrator For those interested
More information3D Animation Graphic Designer
Goal of the program The training program aims to develop the trainee to get him to the level of professional and creative in designing models three-dimensional and move with all respect to this art and
More informationCertified Instructors & Curriculum
Our Promise. TPM is dedicated to provide the most extensive and high-quality training programs to help you maximize your investment. Although the investment in time and money may seem substantial, it will
More informationEntitlement Management Implementation Guide
Entitlement Management Implementation Guide Salesforce, Summer 15 @salesforcedocs Last updated: July 13, 2015 Copyright 2000 2015 salesforce.com, inc. All rights reserved. Salesforce is a registered trademark
More informationEntitlement Management Implementation Guide
Entitlement Management Implementation Guide Salesforce, Winter 16 @salesforcedocs Last updated: November 6, 2015 Copyright 2000 2015 salesforce.com, inc. All rights reserved. Salesforce is a registered
More informationIntroduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
More informationSMIRT: a 3D based approach for manufacturing process management
Page 1 SMIRT: a 3D based approach for manufacturing process management Cosimo Galante July 5th, 2012 Page 2 : abstract The 3D paperless process concept makes a step forward with the SMIRT solution, extending
More informationLuna Community College 2012-2015. Drafting Technology Curriculum Profile
Revised: July 2012 Luna Community College 2012-2015 Drafting Technology Curriculum Profile Content Page Program Goals 2 Degree Requirements 3 Course Descriptions and Outcomes 5 Assessment. 10 Standard
More informationIntroduction to Autodesk Inventor for F1 in Schools
F1 in Schools race car Introduction to Autodesk Inventor for F1 in Schools In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital Prototyping strategy
More informationAutodesk Revit LEARNING PATH BUILDING DESIGN SUITE
Autodesk Revit LEARNING PATH FUNDAMENTALS Duration: 3 days Cost: R5 500 (excl VAT) Revit MEP Duration: 3 days Cost: R5 500 (excl VAT) Revit Structure Duration: 3 days Cost: R5 500 (excl VAT) REVIT ADVANCED
More informationSTEAM STUDENT SET: INVENTION LOG
STEAM STUDENT SET: INVENTION LOG Name: What challenge are you working on? In a sentence or two, describe the challenge you will be working on. 1. CREATE Explore new ideas and bring them to life. You can
More information3D CAD Technology Certificate Program
3D CAD Technology Certificate Program Program Description 160 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology Certificate Awarded 3D CAD Today,
More informationSharePoint for Engineering Document Management & Control
SharePoint for Engineering Document Management & Control Managing and controlling engineering documents and drawings with SharePoint A white paper by Cadac Organice BV Date: 01-03-2012 Table of contents
More informationAutodesk Inventor 2013
Autodesk Inventor 2013 AMS CAD + CAFM Solutions amscad.com Image courtesy of Brimrock Group Inc. and Mechanix Design Solutions Inc. Autodesk Inventor Takes You From 2D to 3D Digital Prototyping The Inventor
More informationApp Inventor Drum Machine Instructions (Project #1) (Version 2 of App Inventor) Description:
App Inventor Drum Machine Instructions (Project #1) (Version 2 of App Inventor) Description: App Inventor is a web based tool that allows the user to create apps for Android devices. The user interface
More informationWeld Design. CATIA V5 Training Foils. Weld Design. Copyright DASSAULT SYSTEMES 1. Instructor Notes:
CATIA V5 Training Foils Weld Design Version 5 Release 19 January 2009 EDU_CAT_EN_WD1_FI_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able to: - Weld parts,
More informationCMAP MOBILE APP TESTING FOUNDATION LEVEL
CMAP MOBILE APP TESTING FOUNDATION LEVEL Copyright 2014 ps_testware 1/6 Introduction Apps and mobiles have become an important element of today s IT and society in a very short time frame. Mobile technologies
More informationNetSuite Essentials. Course Description. Key Objectives
NetSuite Essentials Key Objectives How do I: Configure NetSuite to meet business requirements? Determine user roles and permissions? Customize the user interface to align with business needs? Plan for
More informationFor Android A LEADING PROVIDER OF CONSULTANCY & TRAINING IN MOBILE TECHNOLOGIES IN EDUCATION
For Android A LEADING PROVIDER OF CONSULTANCY & TRAINING IN MOBILE TECHNOLOGIES IN EDUCATION Android Tablets in Education Tablet initiatives are revolutionising how schools meet and deliver their vision
More informationMidland College 2011 2012 Educational Program Assessment Computer Graphics Technology. Assessment Summary
Midland College 2011 2012 Educational Program Assessment Computer Graphics Technology The Computer Graphics Technology program prepares students for careers in the fields of process piping, structural
More informationPRODUCT BROCHURE SPATIAL ANALYZER. Powerful, traceable and easy-to-use metrology and analysis software
PRODUCT BROCHURE SPATIAL ANALYZER Powerful, traceable and easy-to-use metrology and analysis software SPATIAL ANALYZER SpatialAnalyzer (SA) is a powerful, traceable and easy to use metrology and analysis
More informationBusiness Plan Template
Business Plan Template 5 Important Tips Before You Start! 1. The business plan should tell a compelling story about your business, explaining who, what, when, where, how and why. 2. Your plan should be
More informationBIM Project Management Professional (PMP) Technology Certificate Program
BIM Project Management Professional (PMP) Technology Certificate Program Program Description 164 Credit Hours of Instruction Program Completion Time - 6 Months Upon Completion VDCI/cadteacher Technology
More informationCreate efficiencies and improve customer experience through a purpose built system
Create efficiencies and improve customer experience through a purpose built system Universities are choosing to implement purpose built systems to manage their executive/professional programmes and events.
More informationWSET Sake Courses. Prospectus. August 1st 2016 July 31st 2017. WSET Level 1 Award in Sake WSET Level 3 Award in Sake. wsetschool.com. wsetglobal.
WSET Sake Courses Prospectus August 1st 2016 July 31st 2017 WSET Level 1 Award in Sake WSET Level 3 Award in Sake wsetschool.com wsetglobal.com Level 1 & 3 Sake Courses 1 The WSET Level 1 & 3 Sake Courses
More informationAutodesk Certification Exam Guide AutoCAD 2010
Autodesk Certification Exam Guide AutoCAD 2010 Preparation Guide for AutoCAD 2010 Certified Associate and AutoCAD 2010 Certified Professional Certification Exams. This guide is intended as a resource in
More informationFree and Easy Digital Animation Storytelling Chris Scott Santa Ynez School Grade Levels: 7-8th Subjects: History, Technology
Free and Easy Digital Animation Storytelling Chris Scott Santa Ynez School Grade Levels: 7-8th Subjects: History, Technology Project Summary: Students adapt and develop a history lesson to animate. Students
More informationVideo Production Terms and conditions
Video Production Terms and conditions TERMS AND CONDITIONS OF COMMISSIONING AND USAGE OF VIDEO PRODUCTION FROM WAITE FILMS LTD 1. Definitions & General Terms In these Terms and Conditions the words Waite
More informationCREATIVE COMPUTER GRAPHICS II
CREATIVE COMPUTER GRAPHICS II Description This course provides experiences with a variety of computer technologies and Art related software programs, such as Photoshop and Illustrator, which are part of
More informationDWFTM. Tips &Tricks. Publish View & Print Review & Mark Up
DWFTM Tips &Tricks Publish View & Print Review & Mark Up Sharing complex design information has never been easy. Since design files are large, sending sheet sets and 3D models to printers or sharing work
More informationImplementing and Maintaining Microsoft SQL Server 2005 Reporting Services COURSE OVERVIEW AUDIENCE OUTLINE OBJECTIVES PREREQUISITES
COURSE OVERVIEW This three-day instructor-led course teaches students how to implement a ing Services solution in their organizations. The course discusses how to use the ing Services development tools
More informationCompass Access Group Descriptions, Recommended Users, and Training
NOTE: Introductory Compass Navigation training is required of all Compass account holders and is a prerequisite for other Compass training courses. The online training courses and guides referred to below
More informationGrade 6 - Unit 5 3D Home Architect and CAD Lessons 1 to 7
By Scott Parks Blisss Carman Middle School Scott.parks@nbed.nb.ca Computer Aided Drafting (referred to as CAD) is using a computer and software to draw and design objects. A CAD system can be used to:
More informationQ: What discounts do I get when I purchase my account in $100 increments?
Overview Q: What is the Education Pack - online account? A: The IBM Education Pack - online account is a convenient way for customers to purchase IBM Training offerings. The Education Pack - online account
More informationWhen you and your students are saving your files, under the File menu of MovieMaker, save your file as a project rather than a movie:
MOVIE MAKER Before you use Movie Maker: Windows Movie Maker is a program that is free with any machine operating Windows XP (which is, basically, the sort of machine that Year Up uses with its students).
More informationCustomer Service in Microsoft Dynamics CRM 2013
Customer Service in Microsoft Dynamics CRM 2013 Varighed: 1 Days Kursus Kode: M80545 Beskrivelse: This course focuses on how an organization can nurture customer satisfaction through automation of business
More informationWhy switch to AccountEdge?
Why switch to AccountEdge? Here's a full feature comparison between AccountEdge and QuickBooks Pro for Mac TOP KEY FEATURES AccountEdge QuickBooks Pro for Mac Integrated Payroll* Direct Deposit Print and
More informationApp Design Proposal. I. Planning Table (30 points)
App Design Proposal Please use this template to help you plan for your app design. It is recommended to think through your design and include as many details as possible. App Inventor Name: Brian Querry
More informationCertified VETtrak User (Finance Features) Course Outline
Certified VETtrak User (Finance Features) Course Outline Contents Certified VETtrak User (Finance Features)... 1 Course Outline... 1 Workshop overview... 3 Target audience... 3 Course Prerequisites...
More informationCreating detailed drawings
Creating detailed drawings Publication Number spse01545 Creating detailed drawings Publication Number spse01545 Proprietary and restricted rights notice This software and related documentation are proprietary
More informationSalesforce Certified Marketing Cloud Social Specialist Study Guide
Salesforce Certified Marketing Cloud Social Specialist Study Guide Spring 16 STUDY GUIDE 0 Contents SECTION 1. PURPOSE OF THIS STUDY GUIDE... 2 SECTION 2. ABOUT THE SALESFORCE CERTIFIED MARKETING CLOUD
More informationUsing AppInventor2 for teaching
Using AppInventor2 for teaching Two of the aims of the Computer Science curriculum: Understand and apply fundamental principles and concepts of computer science, including abstraction, logic, algorithms,
More informationTECHNOLOGY EDUCATION DEPARTMENT
The Technology Education Department offers an elective course of study to all students at Hinsdale Central. Technology Education courses help students meet the elective arts requirement. Our program of
More informationGirl Scout Journey FAQs Frequently Asked Questions
Girl Scout Journey FAQs Frequently Asked Questions 1. How do we pick which Girl Scout Journey to do? 2. How long does it take to complete a Girl Scout Journey? How long is a typical Girl Scout Journey
More informationNFDA SAMPLE PRENEED FUNERAL CONTRACT PACKET
NFDA SAMPLE PRENEED FUNERAL CONTRACT PACKET The Model Consumer Protection Guidelines for State Preneed Funeral Statutes (the Guidelines ) adopted by the NFDA Policy Board list over 30 disclosures that
More informationHamilton Southeastern Schools Ivy Tech Community College Technical Education Partnership
Hamilton Southeastern Schools Ivy Tech Community College Technical Education Partnership Students enrolled in one of these programs will complete 5 college technical education courses, earning 15-16 college
More informationTHE BILLING PROCESS. Wendy Newlon EMS Software. October 27th 2015
THE BILLING PROCESS Wendy Newlon EMS Software October 27th 2015 Billing Process Steps Create an event with charges Post deposits or pre-payments Verify Charges using Billing Worksheet Preview Event Invoice
More informationNortheast Alabama Community College Drafting and Design Technology AAS, Certificate, and Short Term Certificate Program Review March 2010
Northeast Alabama Community College Drafting and Design Technology AAS, Certificate, and Short Term Certificate Program Review March 2010 Program Purpose The Drafting and Design Technology (DDT) program
More informationAutodesk Cloud Frequently Asked Questions for Customers
Autodesk Cloud Customer FAQ Autodesk Cloud Frequently Asked Questions for Customers September 27, 2011 What are web services, cloud services and cloud computing? All of these terms refer to software technology
More informationCan I interpret and explain data presented in line graphs?
1 of 5 The National Strategies Primary Can I interpret and explain data presented in line graphs? Teaching guidance Key vocabulary data, information, survey, questionnaire, graph, chart, table, scale,
More informationImplementing and Maintaining Microsoft SQL Server 2008 Reporting Services
Course 6236A: Implementing and Maintaining Microsoft SQL Server 2008 Reporting Services Length: 3 Days Published: December 05, 2008 Language(s): English Audience(s): IT Professionals Level: 200 Technology:
More informationCOURSE CATALOG. Charles River Training EMEA. Charles River Development 6 Devonshire Square London EC2M 4YE crdtrainingemea@crd.
COURSE CATALOG Charles River Training EMEA An extensive and comprehensive curriculum designed to meet your needs and enhance productivity by developing solid, useful skills Charles River Development 6
More informationData management by Autodesk
Autodesk Vault Workgroup 2015 Data management by Autodesk Autodesk Vault helps design, engineering, and manufacturing workgroups manage Digital Prototyping information. In order to provide Autodesk Productstream
More informationCOMPUTER SCIENCE Introduction to Programming: Visual Basic 1 CIHS C++ AP Java
COMPUTER SCIENCE Our courses provide information to address a wide range of interests. The computer programming courses have a strong connection to engineering, mathematics, and the sciences. It is common
More informationMicrosoft PPM for Application Administrators using Microsoft Project Online
Microsoft for Application Administrators using Microsoft Project Online An engaging training session designed to train application administrators the fundamentals of maintaining Project Online. About this
More informationCOURSE CATALOG 2014-2015
COURSE CATALOG 2014-2015 CONTENTS ABOUT3 & 4 ADULT LEARNING COURSES6 EDUCATOR PROFESSIONAL DEVELOPMENT11 YOUTH PROGRAMS13 SUMMER & SPRING BREAK CAMPS 15 OTHER INFO 17 INTRO ABOUT Learn to tell stories
More informationGeneral Comparison between 4D Software
General Comparison between 4D Software (Navisworks, Synchro professional, Vico control, itwo and Navigator) Comparison between 4D Software 4D BIM is the next generation of project management, including
More informationUsing WINK to create custom animated tutorials
Using WINK to create custom animated tutorials A great way for students and teachers alike to learn how to use new software is to see it demonstrated and to reinforce the lesson by reviewing the demonstration.
More informationRepublication Service
Republication Service Republication permissions when you need them Get permission in minutes When you need to acquire broad, flexible bundles of rights, do you know where to go? Copyright Clearance Center
More informationTHE AMERICAN ACADEMY OF ART Syllabus for 3DA301 INTRODUCTION TO 3-D MODELING/ANIMATION FALL 2014
THE AMERICAN ACADEMY OF ART Syllabus for 3DA301 INTRODUCTION TO 3-D MODELING/ANIMATION FALL 2014 INSTRUCTOR NAME: OFFICE HOURS & CONTACT INFORMATION: CREDIT HOURS: COURSE SCHEDULE: Marc Soehl Monday, Tuesday,
More informationPrimrose Hill Primary School Literacy Policy: A baseline for outstanding practice
.. Primrose Hill Primary School Literacy Policy: A baseline for outstanding practice January 2012 Review date: January 2013 KEY PRINCIPLES Teaching at Primrose Hill is Learning Centred, meaning that each
More informationMS-8913: Microsoft Dynamics CRM 4.0 Applications. Course Objectives. Required Exam(s) Price. Duration. Methods of Delivery.
MS-8913: Microsoft Dynamics CRM 4.0 Applications This three-day instructor led course explores the Microsoft Dynamics CRM application from a user's perspective. Application functionality covered in the
More informationComputer Aided Drafting & Computer Graphic Design. Advisory Committee. Program Update TABLE OF CONTENTS
Computer Aided Drafting & Computer Graphic Design Advisory Committee Program Update TABLE OF CONTENTS Program Data 1. Enrollment 2. Graduates 3. Demographics 4. Program Costs Student Success Others 1.
More informationVisual Studio 2008: Windows Presentation Foundation
Visual Studio 2008: Windows Presentation Foundation Course 6460A: Three days; Instructor-Led Introduction This three-day instructor-led course provides students with the knowledge and skills to build and
More informationTrainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010
Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010 1 Trainer Preparation Guide for Course 10174A: Configuring and Administering Microsoft SharePoint 2010
More informationCamtasia Studio. Creating Screen Videos
Camtasia Studio Creating Screen Videos WORKSHOP DESCRIPTION... 1 Overview 1 Prerequisites 1 Objectives 1 INTRODUCTION... 1 WHY USE CAMTASIA STUDIO?... 2 WHERE CAN I GET CAMTASIA STUDIO?... 2 HOW TO USE
More informationPTC Creo Elements/Direct Modeling Express
Modeling Express Edition Comparison Chart Learn how upgrading to 19.0, the leading direct 3D CAD design software, can deliver faster design cycles and responsiveness to change throughout your design process.
More informationCamtasia Studio 8.4 Create Engaging Screencasts
!! Camtasia Studio 8.4 May 2014 2014 TechSmith Corporation. All rights reserved This manual, as well as the software described in it, is furnished under license and may be used or copied only in accordance
More informationIntroduction to Teacher s Domain Worksheet
Updated September 2010 Introduction to Teacher s Domain Worksheet Teachers Domain is an online library of more than 2,500 free media resources from the best in public television. These classroom resources,
More informationSalesforce Certified Marketing Cloud Social Specialist Study Guide
Salesforce Certified Marketing Cloud Social Specialist Study Guide Summer 15 BETA STUDY GUIDE 0 Contents SECTION 1. PURPOSE OF THIS STUDY GUIDE... 2 SECTION 2. ABOUT THE SALESFORCE CERTIFIED MARKETING
More informationCreating an Interactive Digital Animation Level: 3 Sub-level: Unit 312 Credit value: 8 Guided learning hours: 65
Unit Title: Creating an Interactive Digital Animation Level: 3 Sub-level: Unit 312 Credit value: 8 Guided learning hours: 65 Unit purpose and aim This unit helps learners to familiarise themselves with
More informationSkills Inventory: Art/Media Communications. 1. Pre-employment Training/Career Development. A. Formal; e.g., certificates. Date Description Location
Skills Inventory: Art/Media Communications 1. Pre-employment Training/Career Development A. Formal; e.g., certificates Date Description Location Art/Design and Communication Skills Inventory: Art/Media
More informationAnimating in Inventor Studio the basics
Animating in Inventor Studio the basics This tutorial is provided at no cost to Autodesk Inventor users by B2 Design. Anyone downloading or viewing the tutorial does not have permission to copy any part
More informationTravel and Expense Management in Microsoft Dynamics AX 2012
Course 80429A: Travel and Expense Management in Microsoft Dynamics AX 2012 Length: Delivery Method: 2 Days Instructor-led (classroom) About this Course This two-day instructor-led course provides students
More informationQuestions and Answers
AutoCAD Architecture 2010 Questions and Answers AutoCAD Architecture 2010 software the version of AutoCAD software for architects. Creating designs and documentation is much more efficient using the software
More informationFive Tips for Presenting Data Analyses: Telling a Good Story with Data
Five Tips for Presenting Data Analyses: Telling a Good Story with Data As a professional business or data analyst you have both the tools and the knowledge needed to analyze and understand data collected
More information