Training: NDT Access Conditions
|
|
|
- Randall Pearson
- 7 years ago
- Views:
Transcription
1 : NDT Access Conditions : MT, VT, PT Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 10 (Proof of Grade 10 or equivalent such as N1; certificate is required). Please note that RT Safety is mandatory for access to an RT 1 course and no RT 1 certificate shall be issued unless a RT Safety certificate in accordance with DOH and issued by Nelson Mandela Metropiltan University Certificate can be shown. Direct access to the course shall be granted if the candidate has passed both mathematics and science at Grade 12 (Proof of Grade 12 or equivalent such as N3 certificate is required). : UT, RT, ECT Alternatively, the candidate shall be required to pass a Proficiency Exam for surface methods, prior to being eligible to sit the applicable NDT course. Please note that the Proficiency test is free of charge and only assesses the basic skills relating to mathematics, science, comprehension and communication capabilities required within the applicable NDT method. The pass mark for the Proficiency test is 70%. Please contact Harold Jansen (harold.jansen@saiw.co.za) to ascertain availability and to make a booking. Proficiency tests are performed on Thursdays between 8:00 and 11:00. In the case of candidates not being able to attend the Proficiency test due to transport problems, arrangements can be made to have the test ed to a suitable invigilator and returned via once completed. Candidate shall be qualified i.e. have received training in accordance with ISO9712: 2012 requirements and have passed the qualification examinations (certified is preferred) as a NDT Technician in the applicable method and sector. - All Methods Direct Access to : Candidate shall have passed both mathematics and science at Grade 12 level (Equivalent to N3 - Proof of Grade 12 certificate is required) and have applicable tertiary qualification(s) and / or relevant NDT experience. Combination of and hours in accordance with an approved syllabus and training programme as per SAQCC - NDT requirements and based on Certification body approval. The qualification examinations shall also have been successfully passed. Candidate shall be qualified i.e. received training in accordance with ISO9712: 2012 requirements and have passed the qualification examinations (certified is preferred) as a NDT Technician in the applicable method and sector, appropriate tertiary qualifications (relevant to the NDT method - chemistry, mathematics or physics; and / or to the product or industry sector - chemistry, metallurgy, engineering etc.) are advantageous. Level 3 - All Methods All candidates for Level 3 Certification in any NDT method shall have successfully completed the Practical exam. (If not certified as, the practical examination shall have been passed within 1 year from date of writing the Level 3 main method examination) Valid Certificate in the applicable method and sector is mandatory when equipment operation or accepting tested components are required Direct Access to Level 3: Combination of, 2 and 3 hours in accordance with an approved syllabus and training program as per ISO 9712 : 2012 and SAQCC NDT requirements and based on Certification body verification. The qualification examinations shall also have been successfully passed. No reduction in requirements for industrial experience. Suitable tertiary qualifications (relevant to the NDT method - chemistry, mathematics or physics; and / or to the product or industry sector - chemistry, metallurgy, engineering etc.) are mandatory. Please contact the following for further information: General: lillian.pin@saiw.co.za or Administration: martie.beetge@saiw.co.za or Certification Administrator: nasreen.mohamed@saiw.co.za or PAGE 66
2 : Non Destructive Testing (NDT) Please note that the training schedule is revised and updated monthly - please refer to the website for the latest version. Please Contact the NDT Manager - Mark Digby ( mark.digby@saiw.co.za) should you have sufficient student numbers to accommodate an additional course based on your company s time schedule. (Subject to the availability of resources) The following courses can currently be presented at a suitable venue supplied by the booking company viz. UTWT, RT Inter and Appreciation of NDT for Engineers. / Magnetic Testing (MT) Magnetic Testing (MT): Gr 10 with Maths & Science OR Proficiency Test > 70% - Magnetic Testing (MT): MT 1 A training & Qualification MT 1.A MT 2.A MT 1.1 Forgings; MT 1.2 Castings; MT 1.3 Welds MT 2.1 Forgings; MT 2.2 Castings; MT 2.3 Welds Group 1: Jan (DBN 1) Exam: 15 Jan Group 6: May Exam: 29 May Group 11: 29 Aug - 01 Sep Exam: 02 Sep Group 1: Jan Exam: 29 Jan Group 6: Jun Exam: 24 Jun Group 11: Oct Exam: 28 Oct Group 2: Jan Exam: 22 Jan Group 7: 30 May - 02 Jun Exam: 03 Jun Group 12: Sep Exam: 16 Sep Group 2: Mar Exam: 11 Mar Group 7: Aug (DBN 2) Exam: 05 Aug Group 12: 28 Nov - 01 Dec (DBN 3) Exam: 02 Dec Group 3: Feb Exam: 26 Feb Group 8: Jul Exam: 08 Jul Group 13: Oct (DBN 4) Exam: 07 Oct Group 3: Apr Exam: 15 Apr Group 8: Aug Exam: 19 Aug Group 13: Dec Group 4: Apr (DBN 2) Exam: 8 Apr Group 9: Jul Group 14: Nov (DBN 5) Exam: 11 Nov Group 4: May (DBN 1) Exam: 27 May Group 9: Sep Exam: 09 Sep Group 5: May Exam: 13 May Group 10: Aug (DBN 3) Exam: 26 Aug Group 16: Nov Exam: 18 Nov Group 5: Jun Group 10: Oct Magnetic Testing (MT) Level 3: NDT Level 3 Basic + MT 2.A & Qualification MT 3.A Group 1: 31 Oct - 04 Nov Exam: 06 Dec & Dec Please contact the following for further information: General: lillian.pin@saiw.co.za or Administration: martie.beetge@saiw.co.za or Certification Administrator: nasreen.mohamed@saiw.co.za or PAGE 67
3 : Non Destructive Testing (NDT) / Penetrant Testing (PT) Penetrant Testing (PT): Gr 10 with Maths & Science OR Proficiency Test > 70% - Penetrant Testing (PT): PT 2.A & Qualification PT 1.A PT 2.A PT 1.1 Forgings; PT 1.2 Castings; PT 1.3 Welds PT 2.1 Forgings; PT 2.2 Castings; PT 2.3 Welds Group 1: Jan Exam: 15 Jan Group 6: May (DBN 2) Exam: 20 May Group 11: Sep Exam: 23 Sep Group 1: Jan (DBN 1) Exam: 29 Jan Group 6: 30 May - 02 Jun (DBN 3) Exam: 03 Jun Group 11: Nov Exam: 11 Nov Group 2: Jan (DBN 1) Exam: 22 Jan Group 7: Jun Group 12: Oct Exam: 21 Oct Group 2: Feb Exam: 05 Feb Group 7: Jun Exam: 01 Jul Group 12: Nov (DBN 5) Exam: 18 Nov Group 3: 29 Feb - 03 Mar Exam: 04 Mar Group 8: Jul Exam: 15 Jul Group 13: Nov (DBN 4) Exam: 25 Nov Group 3: Apr Exam: 08 Apr Group 8: Aug Exam: 05 Aug Group 13: Dec Group 4: Mar Exam: 18 Mar Group 9: Jul (DBN 3) Group 14: 28 Nov - 01 Dec Exam: 02 Dec Group 4: Apr (DBN 2) Exam: 15 Apr Group 9: Aug Exam: 19 Aug Group 5: May Exam: 13 May Group 10: Aug Exam: 26 Aug Group 5: May Exam: 27 May Group 10: Oct (DBN 4) Penetrant Testing (PT): Level 3 NDT Level 3 + PT 2.A & Qualification PT 3.A Group 1: Oct Exam: 05 Dec & Dec PAGE 68
4 : Non Destructive Testing (NDT) / Visual Testing (VT) Visual Testing (VT): Gr 10 with Maths & Science OR Proficiency Test > 70% - VT 1.A VT 1.1 Forgings; VT 1.2 Castings; VT 1.3 Welds R R R Group 1: Feb Exam: 12 Feb Group 6: Aug (DBN 2) Exam: 04 Aug Group 2: Mar Exam: 11 Mar Group 7: 29 Aug - 01 Sep Exam: 02 Sep Group 3: Apr (DBN 1) Exam: 22 Apr Group 8: 28 Nov - 01 Dec Exam: 02 Dec Group 4: Jun Exam: 01 Jul Group 9: Sep (CPT 1) Exam: 23 Sep Group 5: Jul Group 10: May (CPT 2) Exam: 13 May Visual Testing (VT): VT 2.A & Qualification VT 2.A VT 2.1 Forgings; VT 2.2 Castings; VT 2.3 Welds R R R Group 1: Apr Exam: 15 Apr Group 2: Jun Group 3: Aug Exam: 19 Aug Group 4: Oct Group 5: Dec Group 6: Oct (CPT 1) Exam: 07 Oct Visual Testing (VT): Level 3 NDT Level 3 Basic + VT 2.A & Qualification Eddy Currrent Testing (ECT) Ed d y Current Te sti n g (EC T ): Gr 12 with Maths & Science OR Proficiency Test > 70% - VT 3.A ECT 1.A ECT 1.1 Surface; ECT 1.2 Tubes & Bars R R R Group 1: Nov Exam: 07 Dec & Dec Group 1: May Exam: May Group 2: Jul Exam: Jul Eddy Current Testing (ECT): ECT 1.A & Qualification ECT 2.A ECT 2.1 Surface; ECT 2.2 Tubes & Bars ECT 2.3 Complex Shapes R R R Group 1: Sep Exam: Sep Advanced Option Eddy Current Testing (ECT): (ECT 2.A Certification) ECT 2.5 Digital Applications & Signal Analysis 24 hours PAGE 69
5 : Non Destructive Testing (NDT) / Eddy Currrent Testing (ECT) continued Eddy Current Testing (ECT): Level 3 NDT Level 3 Basic + ECT 2.A & Qualification ECT 3.A 4 Group 1: Nov Exam: 08 Dec & Dec Radiographic Testing (RT) Gr 12 with Maths & Science OR Proficiency Test > 70% - Limited Option: RT 1.A & Qualification RT 1.A & Qualification RT 1.A * RT 2.INT Welds & Dense Alloys RT 2.A * DOH RT Safety RT 1.5 X-Ray RT 1.6 Gamma Ray Film Interpretation of Welds in Dense Alloys only (No operational RT) RT 2.5 RT 2.6 X-Ray Gamma Ray 72 hours R R R R R R R R R Group 1: Jan Exam: Feb Group 1: Feb (DBN 1) Exam: 12 Feb Group 6: 25 Jul - 04 Aug Exam: 05 Aug Group 1: 29 Feb - 11 Mar Exam: Mar Group 2: Apr Exam: Apr Group 2: Feb Exam: 26 Feb Group 7: Sep (DBN 3) Exam: 23 Sep Group 2: Aug Exam: 29 Aug - 02 Sep Group 3: 20 Jun - 08 Jul Exam: Jul Group 3: May Exam: 20 May Group 8: Oct Group 4: Sep Exam: Oct Group 4: 23 May - 02 Jun Exam: 03 Jun Group 9: Jun (CPT) Exam: 01 Jul Group 5: 30 May - 09 Jun (DBN 2) Advanced Option: RT 2.A Certification RT 2.9 Digital Radiography subject to minimum of 6 studentsper class Level 3 NDT Level 3 Basic + RT 2.A & Qualification RT 3.A Group 1: Nov Exam: 10 Dec (Sat) & Dec *Light Alloys and/or Castings & Forgings are request and subject to a minimum of. PAGE 70
6 : Non Destructive Testing (NDT) / Testing (UT) Limited option Testing (UT): Gr 12 with Maths & Science OR Proficiency Test > 70% - UT 1.WT Limited to wall thickness measurement using compression probe only (A-scan & D-metre) R R R Group 1: 29 Feb - 03 Mar Exam: 04 - Mar Group 6: Jul Exam: 15 Jul Group 2: Mar (DBN 1) Exam: 18 Mar Group 7: Jul Group 3: 8-21 Apr Exam: 22 Apr Group 8: Oct (DBN 3) Exam: 28 Oct Group 4: May (DBN 2) Exam: 07 May (Sat) Group 9: Nov Exam: 18 Nov Group 5: Jun Group 10: Dec (DBN 4) Testing (UT): Gr 12 with Maths & Science OR Proficiency Test > 70% - Testing (UT): UT 2.A Certification UT 1.A 2.A UT 1.1 Wrought s UT 1.2 Forgings UT 1.3 Butt Weld in Plate UT 1.4 Butt Weld in Pipe UT 2.1 Wrought s UT 2.2 Forgings UT 2.3 Butt Weld in Plate UT 2.4 Butt Weld in Pipe UT 2.5 T-joints and other UT 2.6 Nozzles UT 2.7 Nodes Group 1: Jan Exam: Feb Group 6: Sep Exam: Oct Group 1: Feb Exam: 29 Feb - 04 Mar Group 6: 21 Nov - 09 Dec (DBN 2) Exam: Dec Group 2: 15 Feb - 03 Mar (DBN 1) Exam: Mar Group 7: Oct (DBN 3) Exam: Oct Group 2: Apr Exam: Apr Group 3: May Exam: 30 May - 03 Jun Group 3: 20 Jun - 08 Jul (DBN 1) Exam: Jul Group 4: 20 Jun - 08 Jul Exam: Jul Group 4: 15 Aug - 02 Sep Exam: Sep Group 5: 15 Aug - 02 Sep (DBN 2) Exam: Sep Group 5: 31 Oct - 18 Nov Exam: Nov Advanced option Testing (UT) UT 2.A Certification UT 2.8 Critical Flaw Sizing subject to minimum of 6 students per class PAGE 71
7 : Non Destructive Testing (NDT) / Testing (UT) continued Advanced option Testing (UT) UT 2.A Certification UT 2.9 Austenitic Stainless Steel R R R Advanced option Testing (UT) UT 2.A Certification UT 2.10 UT Phased Array R R R Advanced option Testing (UT) UT 2.A Certification Testing (UT) Level 3 NDT Level 3 Basic + UT 2.A & Qualification NDT Level 3: Basic UT 2.11 UT 3.A Pre - & In - Time of Flight Diffraction 19 hours R R R Group 1: 28 Nov - 02 Dec (Sat) & Dec NDT Level 3 Basic Gr 12 with Maths & Science Tertiary Qualification Advantageous & Qualification in at least 2 Surface & 1 Volumetric Methods NDT 3.A Pre - & In - Service Testing Part A Materials & Processes Part B Qual & Cert Schemes Part C NDT R R N/A Group 1: Oct Exam: 22 & 23 Oct Appreciation Courses Appreciation of NDT for Engineers N/A R R R Group 1: Feb Group 2: Apr (DBN) Group 3: 20 May - 03 Jun (CPT) Group 4: Sep Group 5: Dec PAGE 72
Training Course Schedule
Training Course Schedule 2016 AINDT EXAMS HELD AT THE END OF ALL ISO 9712 COURSES. INITIAL EXAM COSTS INCLUDED IN COURSE FEES. Satisfactory completion of an ATTAR training course is only part of the process
AT&T Global Network Client for Windows Product Support Matrix January 29, 2015
AT&T Global Network Client for Windows Product Support Matrix January 29, 2015 Product Support Matrix Following is the Product Support Matrix for the AT&T Global Network Client. See the AT&T Global Network
proper way. Therefore operator training and certification is key in every inspection program to ensure compliance and improve quality and integrity.
SGS NDT Training & Examination Centre Professional Services for Your Safety and Reputation ABOUT NON DESTRUCTIVE TESTING (NDT) About NDT NDT plays a key role in assessing conformity and reliability of
Southern African Institute of Welding Course Prospectus 2016 SAIW. Promoting excellence in welding in Africa
Southern African Institute of Welding Course Prospectus Promoting excellence in welding in Africa Welding/Fabrication Supervisor Project Manager Fabrication Workshop Manager Research & Development Fabrication
COMPARISON OF FIXED & VARIABLE RATES (25 YEARS) CHARTERED BANK ADMINISTERED INTEREST RATES - PRIME BUSINESS*
COMPARISON OF FIXED & VARIABLE RATES (25 YEARS) 2 Fixed Rates Variable Rates FIXED RATES OF THE PAST 25 YEARS AVERAGE RESIDENTIAL MORTGAGE LENDING RATE - 5 YEAR* (Per cent) Year Jan Feb Mar Apr May Jun
COMPARISON OF FIXED & VARIABLE RATES (25 YEARS) CHARTERED BANK ADMINISTERED INTEREST RATES - PRIME BUSINESS*
COMPARISON OF FIXED & VARIABLE RATES (25 YEARS) 2 Fixed Rates Variable Rates FIXED RATES OF THE PAST 25 YEARS AVERAGE RESIDENTIAL MORTGAGE LENDING RATE - 5 YEAR* (Per cent) Year Jan Feb Mar Apr May Jun
Case 2:08-cv-02463-ABC-E Document 1-4 Filed 04/15/2008 Page 1 of 138. Exhibit 8
Case 2:08-cv-02463-ABC-E Document 1-4 Filed 04/15/2008 Page 1 of 138 Exhibit 8 Case 2:08-cv-02463-ABC-E Document 1-4 Filed 04/15/2008 Page 2 of 138 Domain Name: CELLULARVERISON.COM Updated Date: 12-dec-2007
Analysis One Code Desc. Transaction Amount. Fiscal Period
Analysis One Code Desc Transaction Amount Fiscal Period 57.63 Oct-12 12.13 Oct-12-38.90 Oct-12-773.00 Oct-12-800.00 Oct-12-187.00 Oct-12-82.00 Oct-12-82.00 Oct-12-110.00 Oct-12-1115.25 Oct-12-71.00 Oct-12-41.00
Enhanced Vessel Traffic Management System Booking Slots Available and Vessels Booked per Day From 12-JAN-2016 To 30-JUN-2017
From -JAN- To -JUN- -JAN- VIRP Page Period Period Period -JAN- 8 -JAN- 8 9 -JAN- 8 8 -JAN- -JAN- -JAN- 8-JAN- 9-JAN- -JAN- -JAN- -JAN- -JAN- -JAN- -JAN- -JAN- -JAN- 8-JAN- 9-JAN- -JAN- -JAN- -FEB- : days
Ashley Institute of Training Schedule of VET Tuition Fees 2015
Ashley Institute of Training Schedule of VET Fees Year of Study Group ID:DECE15G1 Total Course Fees $ 12,000 29-Aug- 17-Oct- 50 14-Sep- 0.167 blended various $2,000 CHC02 Best practice 24-Oct- 12-Dec-
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description. CSWIP 3.2 Senior Welding Inspector
TWI INDIA CSWIP COURSE AND EXAMINATION FEES 2016 Course / Examination description FEE CSWIP 3.0 Visual Welding Inspector Course and Examination Package 61,200 Exam only 26,500 Course Only 44,800 3.0 Retest
Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories
ACCREDITATION SCHEME FOR LABORATORIES Technical Notes NDT 001 Specific Requirements for Non- Destructive Testing Laboratories Technical Notes NDT 001, Apr 14 The SAC Accreditation Programme is managed
2016 Examina on dates
Please note the following informa on: The following exams are available throughout the year: Please click on the exam for which you wish to see the dates. When you have finished, you can select to return
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center. www.geinspectionacademy.com
Reach Higher with Inspection Academy GE s Inspection Technologies Global Knowledge Center www.geinspectionacademy.com Sharing knowledge. Shaping technology. At GE, we know the value of investing in your
2015 Examination dates
Please note the following information: The following exams are available throughout the year: BULATS Paper-based: Please click on the exam for which you wish to see the dates. When you have finished, you
Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.
INDUSTRIAL SERVICES - NON-DESTRUCTIVE TESTING Reliable Flaw Detection. Fast Inspection Times. High quality non-destructive testing services tailored for all your needs. www.tuv.com/ndt The reliability
CENTERPOINT ENERGY TEXARKANA SERVICE AREA GAS SUPPLY RATE (GSR) JULY 2015. Small Commercial Service (SCS-1) GSR
JULY 2015 Area (RS-1) GSR GSR (LCS-1) Texarkana Incorporated July-15 $0.50690/Ccf $0.45450/Ccf $0.00000/Ccf $2.85090/MMBtu $17.52070/MMBtu Texarkana Unincorporated July-15 $0.56370/Ccf $0.26110/Ccf $1.66900/Ccf
NON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS
NON DESTRUCTIVE TESTING & ASNT WELD INSPECTION & AWS What is ASNT? What is ASNT? The American Society for Nondestructive Testing, Inc. What is ASNT? ASNT is the world's largest technical society for nondestructive
P/T 2B: 2 nd Half of Term (8 weeks) Start: 25-AUG-2014 End: 19-OCT-2014 Start: 20-OCT-2014 End: 14-DEC-2014
2014-2015 SPECIAL TERM ACADEMIC CALENDAR FOR SCRANTON EDUCATION ONLINE (SEOL), MBA ONLINE, HUMAN RESOURCES ONLINE, NURSE ANESTHESIA and ERP PROGRAMS SPECIAL FALL 2014 TERM Key: P/T = Part of Term P/T Description
Air Service Training (Engineering) Ltd
Air Service Training (Engineering) Ltd IR Part 66 Category B Modular Courses for Self-Improver, Conversion and Extension Candidates and Approved Examinations 2015 Also available in large print (16pt) And
P/T 2B: 2 nd Half of Term (8 weeks) Start: 26-AUG-2013 End: 20-OCT-2013 Start: 21-OCT-2013 End: 15-DEC-2013
2013-2014 SPECIAL TERM ACADEMIC CALENDAR FOR SCRANTON EDUCATION ONLINE (SEOL), MBA ONLINE, HUMAN RESOURCES ONLINE, NURSE ANESTHESIA and ERP PROGRAMS SPECIAL FALL 2013 TERM Key: P/T = Part of Term P/T Description
P/T 2B: 2 nd Half of Term (8 weeks) Start: 24-AUG-2015 End: 18-OCT-2015 Start: 19-OCT-2015 End: 13-DEC-2015
2015-2016 SPECIAL TERM ACADEMIC CALENDAR For Scranton Education Online (SEOL), Masters of Business Administration Online, Masters of Accountancy Online, Health Administration Online, Health Informatics
GLOBAL INSPECTION AND CERTIFICATION
GLOBAL INSPECTION AND CERTIFICATION CONTENTS About us 3 Services 3 Lifting Equipment Inspection & Certification 3 Conventional & Advanced Non Destructive Testing (NDT) 4 Rig Inspection & Commissioning
GENERAL REQUIREMENTS FOR QUALIFICATION AND PCN CERTIFICATION OF NDT PERSONNEL
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org PCN/GEN ISSUE 10 rev C IMPLEMENTATION
Academic Calendar 2015-2018 Arkansas State University - Jonesboro
Shared Governance Proposal Any constituent (individual or group) may submit a proposal into the shared governance process. In order to be considered, each proposal must contain the following and be directed
Important Dates Calendar 2014-2015 FALL
Important Dates Calendar 204-205 FALL Rev. 6-8-4 st 8 H st 0 2nd 0 st 5 2nd 5 3rd 5 LSC Advanced Registration Begins May 27 May 27 May 27 May 27 May 27 May 27 May 27 May 27 May 27 Returning Students Advanced
Certification request for certification of NDT-Personnel
body for A. Personal Details on Candidate / on the person to be certified Name...... Familiy Name, given name Title Address...... Street, No. Postal Code, city...... Phone, Fax E-Mail Born on, -in... B.
2015 SOUTH EAST ASIA CSWIP COURSE / EXAMINATION FEES. Welding Inspection
2015 SOUTH EAST ASIA COURSE / EXAMINATION FEES Welding Inspection 3.0 Visual Welding Inspector - Level 1 and Examination package 2420 2665 1320 835 Only 1815 1995 985 630 Examination 910 1000 495 315 Examination
Computing & Telecommunications Services Monthly Report March 2015
March 215 Monthly Report Computing & Telecommunications Services Monthly Report March 215 CaTS Help Desk (937) 775-4827 1-888-775-4827 25 Library Annex helpdesk@wright.edu www.wright.edu/cats/ Last Modified
Cambridge for. exams officers. Cambridge Administrative Guide (UK) 2015. Guidance for exams officers administering Cambridge examinations
Important information This guide was updated in January 2015. Changes are highlighted in red. Cambridge for exams officers Cambridge Administrative Guide (UK) 2015 Guidance for exams officers administering
CAFIS REPORT 2015.10
CAFIS REPORT 2015.10 INDEX Message CAFIS Inbound 03-06 07-08 CAFIS Arch 09-10 CAFIS Brain 11-12 CAFIS Global 13-14 What We Do 15-16 About CAFIS 17-18 Services for Member Stores 19-34 Services for Card
Accident & Emergency Department Clinical Quality Indicators
Overview This dashboard presents our performance in the new A&E clinical quality indicators. These 8 indicators will allow you to see the quality of care being delivered by our A&E department, and reflect
$50 $100 0.75% of (Course Fee less grant + Medical Insurance) OR $25 whichever is higher $80
Academy Version 2 2015/2016 Local (Full time) Course Fees (subject to prevailing GST of 7%) Note: The revised course fees for 2016 will be implemented for all applications received on or after 1 January
Supervisor Instructions for Approving Web Time Entry
Supervisor Instructions for Approving Web Time Entry Time Approval Deadlines by Category Local 2110 Members members submit time by NOON on Monday of the pay week. Time should be approved no later than
Government proposals to reform vocational qualifications for 16-19 year olds in England
Government proposals to reform vocational qualifications for 16-19 year olds in England A consultation published by the Department for Education (DfE) on 7 th March 2013 What reforms does the consultation
ICAEW (ACA) Manchester
ICAEW (ACA) Manchester To book call 03300 603 200 Or visit bpp.com/icaew BPP Manchester St. James s Building, 79 Oxford Street, Manchester, M1 6FQ Ways to Study In Centre Face-to-Face This is ideal if
IMPLEMENTATION DATE: 1 st OCTOBER 2015
PSL 57A: APPLICATION FOR INITIAL EXAMINATION WHEN COMPLETED, SUBMIT DIRECTLY TO THE PCN TEST CENTRE. DO NOT SEND TO BINDT Certification Services Division Newton Building NOTE: use PSL/57B for recertification,
SETSCO. Year 2016 Course Programme. 03 Mar 02 Jun 01 Sep 01 Dec. 21 Dec 15 21 Mar 20 Jun 26 Sep. 01 Feb 02 May 01 Aug 31 Oct.
SETSCO Year 2016 Programme Safety in Welding and Cutting Processes : (6 Hours, 6:00 pm 9:00 pm, Thursday and Friday) Closing 17 Mar 18 Mar 16 Jun 17 Jun 15 Sep 16 Sep 15 Dec 16 Dec 03 Mar 02 Jun 01 Sep
State Annual Report Due Dates for Business Entities page 1 of 10
State Annual Report Due Dates for Business Entities page 1 of 10 If you form a formal business entity with the state, you may be required to file periodic reports on the status of your entity to preserve
IMPLEMENTATION DATE 1 st OCTOBER 2015
PSL 57B ISSUE 7 APPLICATION FOR RECERTIFICATION OR SUPPLEMENTARY EXAMINATION, OR A RETEST OF A PREVIOUSLY FAILED EXAMINATION Certification Services Division Newton Building St George s Avenue Northampton
11. NONDESTRUCTIVE TESTING
11. NONDESTRUCTIVE TESTING Nondestructive testing includes magnetic particle testing (MT), Liquid Dye Penetrant testing (PT), Radiographic Testing (RT) and Ultrasonic Testing (UT). The purpose of nondestructive
Training Schedule for 2016/2017 CERTIFIED COURSES
S I N G A P O R E Q U A L I T Y I N S T I T U T E Website: www.sqi.org.sg Email: enquiries@sqi.org.sg Our World Partner in Quality Training Schedule for 2016/2017 CERTIFIED COURSES Course Day / Hour Commencement
PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January
News Release FOR IMMEDIATE RELEASE February 25, 2015 CONTACT: Lisa Harrison 202.452.7115/ lharrison@steel.org PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January Washington,
Castellon, 27 28 of January 2011. Copyright Grupo Europeo de Consultoría LocalEurope. Reservados todos los derechos.
Management of REINPO RETAIL Project Castellon, 27 28 of January 2011. Objective: managing the control of all the steps needed for the projectimplementation: schedule, budget, results, partnership, etc.
2013 2014 University-Wide Academic Calendar
2013 2014 University-Wide Academic Calendar Guide to Abbreviations UGD = Undergraduate Day GS = Graduate Schools LAW = School of Law CPS = College of Professional Studies Aug 26 Monday LAW: Fall semester
Handbook on the Ultrasonic Examination. Austenitic Welds
Handbook on the Ultrasonic Examination Austenitic Welds The International Institute of Welding Edition Handbook On the Ultrasonic Examination of Austenitic Welds Compiled by COMMISSION V Testing, Measurement,
ACCA Interactive Timetable
ACCA Interactive Timetable 2016/17 Professional information last updated 1August 2016 v3.1 Please note: Information and dates in this timetable are subject to change. How the 4 exam sittings can work for
ACCA Interactive Timetable
ACCA Interactive Timetable 2016/17 Professional information last updated y 2016 v2.1 Please note: Information and dates in this timetable are subject to change. How the 4 exam sittings can work for you
FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in December
News Release FOR IMMEDIATE RELEASE January 27, 2015 CONTACT Lisa Harrison 202.452.7115/ lharrison@steel.org FULL YEAR 2014 TOTAL STEEL IMPORTS UP 38% FROM 2013 Finished Steel Import Market Share 30% in
2015-16 BCOE Payroll Calendar. Monday Tuesday Wednesday Thursday Friday Jun 29 30 Jul 1 2 3. Full Force Calc
July 2015 CM Period 1501075 July 2015 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 August 2015 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
UPCOMING PROGRAMMES/COURSES APRIL, 2014 MARCH, 2015 (MIND KINGSTON & MANDEVILLE CAMPUSES)
UPCOMING PROGRAMMES/ IL, CH, 2 UPCOMING PROGRAMMES/ IL, CH, Table of Contents Programme/Course Awards Page(s) Certificates Secretarial Qualifying Examination 5 Minute Writing 5 Public Speaking & Presentation
Independent Accountants Report on Applying Agreed-Upon Procedures
Independent Accountants Report on Applying Agreed-Upon Procedures Board of Trustees We have performed the procedures, as discussed below, with respect to the employer contributions remitted by to the in
Throughput and Outstanding Workload for High Court Criminal Jury Trials - August 2005 to July 2006
Page 1 Throughput and Outstanding Workload for Criminal Jury Trials - August 20 to July 20 Opening New Retrials Transfers Warrants Number of Cases Disposed Warrants Transfers Merged/ Hung Mis- Closing
ACCA Interactive Timetable
ACCA Interactive Timetable 2016/17 Professional Milton Keynes information last updated 22 June 2016 Please note: Information and dates in this timetable are subject to change. How the 4 exam sittings can
Energy Savings from Business Energy Feedback
Energy Savings from Business Energy Feedback Behavior, Energy, and Climate Change Conference 2015 October 21, 2015 Jim Stewart, Ph.D. INTRODUCTION 2 Study Background Xcel Energy runs the Business Energy
Detailed guidance for employers
April 2015 3 Detailed guidance for employers Appendix A: Pay reference periods This document accompanies: Detailed guidance no. 3 Assessing the workforce Pay reference period calendars where the definition
Choosing a Cell Phone Plan-Verizon
Choosing a Cell Phone Plan-Verizon Investigating Linear Equations I n 2008, Verizon offered the following cell phone plans to consumers. (Source: www.verizon.com) Verizon: Nationwide Basic Monthly Anytime
Consumer ID Theft Total Costs
Billions Consumer and Business Identity Theft Statistics Business identity (ID) theft is a growing crime and is a growing concern for state filing offices. Similar to consumer ID theft, after initially
Financial Operating Procedure: Budget Monitoring
Financial Operating Procedure: Budget Monitoring Original Created: Jan 2010 Last Updated: Jan 2010 1 Index 1 Scope of Procedure...3 2 Aim of Procedure...3 3 Roles & Responsibilities...3 Appendix A Timetable...7
BS EN 16001 Energy Management Systems VICTORIA BARRON, PRODUCT MARKETING MANAGER, BSI
BS EN 16001 Energy Management Systems VICTORIA BARRON, PRODUCT MARKETING MANAGER, BSI Agenda Energy Management in context Why Energy Management? Business Needs How BS EN 16001 helps organisations meet
3 Year On-Call Steel Fabrication Inspection Services. Request for Proposal. Iowa Department of Transportation
3 Year On-Call Steel Fabrication Inspection Services Request for Proposal Iowa Department of Transportation Introduction The Iowa Department of Transportation s Office of Materials is interested in Certified
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES
NON-DESTRUCTIVE TESTING FULL SCOPE OF INTEGRATED NDT SERVICES RIGHT SERVICE MAXIMUM RETURN Whether it is in fabrication, pipe manufacturing, pipeline, plant construction, chemical, petrochemical plants,
ACTIVE MICROSOFT CERTIFICATIONS:
Last Activity Recorded : May 30, 2014 Microsoft Certification ID : 375009 SUSANNE SCHNEIDER KAISERSTRASSE 53 REUTLINGEN, 72764 DE SUSANNE.SCHNEIDER@KIT-KOM.DE *Charter- Certification that was achieved
API Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
EN 4179/NAS 410 Interpretation
EN 4179/NAS 410 Interpretation The NANDTB has adopted NAS 410 / EN 4179 in lieu of AS 3669 as the standard for the qualification and approval of NDT technicians. Employers applying these standards sometimes
Sept 2014 - Sept 2015 To book call 03300 603 200 or visit bpp.com/aat. Online Classroom Live (OCR Live)
AAT Online Classroom Sept 2014 - Sept To book call 03300 603 200 or visit bpp.com/aat Our courses Way to study Face-to-Face (F2F) This is ideal if you want to study at a steady pace and can commit to specific
2013-2014. oct 03 / 2013 nov 12 / 2013. oct 05 / 2013. oct 07 / 2013. oct 21 / 2013. oct 24 / 2013. nov 07 / 2013 nov 14 / 2013.
2013- ACADEMIC CALENDARS SOUTH UNIVERSITY 2013- ACADEMIC CALENDAR Fall 2013 Winter Spring Summer New Student Orientation Session II (Mid ) oct 03 / 2013 nov 12 / 2013 jan 09 / feb 18 / apr 03 / may 13
About CREST R&D Grant
1 About CREST R&D Grant Philosophy Higher value Electrical & Electronics (E&E) economic sector can be achieved when R&D thrives in the ecosystem This can be accelerated by promoting collaborative research
Academic Calendars. Term I (20081) Term II (20082) Term III (20083) Weekend College. International Student Admission Deadlines
Academic Calendars Term I (20081) Term II (20082) Academic Calendars Term III (20083) Weekend College International Student Admission Deadlines Final Examination Schedule Broward Community College Catalog
AR3400CA COURSE AND ASSESSMENT GUIDE NCEA LEVEL
toi ataata visual arts photography AR3400CA COURSE AND ASSESSMENT GUIDE NCEA LEVEL 3 2015/2 photography ar3400 teacher contact details When you first make contact with your teacher, please fill out their
ACCESS Nursing Programs Session 1 Center Valley Campus Only 8 Weeks Academic Calendar 8 Weeks
Session 1 Academic Calendar August 24, 2015 to October 17, 2015 Tuesday / Thursday, 5:30 pm to 8:30 pm M/W T/TH T/W TH S Saturday lab as scheduled Classes Begin 24-Aug 25-Aug 25-Aug 27-Aug 29-Aug NU205
ACCESS Nursing Programs Session 1 Center Valley Campus Only 8 Weeks Academic Calendar 8 Weeks
Session 1 Academic Calendar August 24, 2015 to October 17, 2015 Tuesday / Thursday, 5:30 pm to 8:30 pm M/W T/TH T/W TH S Saturday lab as scheduled Classes Begin 24-Aug 25-Aug 25-Aug 27-Aug 29-Aug NU205
FY 2015 Schedule at a Glance
Coaching and Mentoring for Excellence Oct 21 23, 2014 $2,950 Residential Coaching and Mentoring for Excellence Apr 7 9, 2015 $2,400 Non-residential Coaching and Mentoring for Excellence May 27 29, 2015
La Salle College. Career Guidance and Life Planning Education
La Salle College Career Guidance and Life Planning Career Guidance and Life Planning 2014-15 Goal 1. Enrich the content and expand the scope of the existing career guidance service 2. Integrate effective
LSUF 24 th January 2006
Quality Control ISO 17025:2005 5.9 Assuring the quality of test and calibration results 5.9.1 The laboratory shall have quality control procedures for monitoring the validity of tests and calibrations
Sage ERP MAS 90, 200, 200 SQL, and Sage ERP MAS 500. Supported Versions
Sage ERP MAS 90, 200, 200 SQL, and Sage ERP MAS 500 Supported Versions Current Document: 2012... Page 1 Earlier Documents: 2011... Page 2 2010... Page 3 2009... Page 4 2008... Page 5 Sage ERP MAS 90, 200,
World Class Training in NDT COURSE CATALOGUE
World Class Training in NDT COURSE CATALOGUE canadian innovation. global knowledge. TRAINING NDT technique courses Professional Development training Workshops - Certification and Academic On-site at company
Climatography of the United States No. 20 1971-2000
Climate Division: CA 4 NWS Call Sign: Month (1) Min (2) Month(1) Extremes Lowest (2) Temperature ( F) Lowest Month(1) Degree s (1) Base Temp 65 Heating Cooling 1 Number of s (3) Jan 59.3 41.7 5.5 79 1962
Resource Management Spreadsheet Capabilities. Stuart Dixon Resource Manager
Resource Management Spreadsheet Capabilities Stuart Dixon Resource Manager Purpose Single view of resource data Shows rolling demand vs supply for 14 months, 2 months back, current month, and 11 forward
Start Your. Business Business Plan
Start Your Waste Recycling Business A TECHNICAL STEP-BY-STEP-GUIDE OF HOW TO START A COMMUNITY-BASED WASTE RECYCLING BUSINESS Start Your Waste Recycling Business Business Plan INTERNATIONAL LABOUR OFFICE
Testing & Consulting Engineering. NDT Industrial Environmental D.O.T, Construction & Mechanical. www.unifiedtesting.com
Testing & Consulting Engineering NDT Industrial Environmental D.O.T, Construction & Mechanical www.unifiedtesting.com NONDESTRUCTIVE TESTING (NDT) SERVICES UTS Nondestructive Testing (NDT) Services provides
Pressure Control Supplier Quality Requirements Nondestructive Testing Services SQ-10 Rev: 1.1
Approved By: Jerry Longmire Vice President - Quality Jim Harris Quality Leader - NAM Document Revision Chart The following chart lists the revisions made to this document tracked by version. Use this to
Climatography of the United States No. 20 1971-2000
Climate Division: CA 6 NWS Call Sign: SAN Month (1) Min (2) Month(1) Extremes Lowest (2) Temperature ( F) Lowest Month(1) Degree s (1) Base Temp 65 Heating Cooling 100 Number of s (3) Jan 65.8 49.7 57.8
Schedule of VET FEE-HELP Tuition Fees & Census Dates
Delivery Location Diploma of Beauty Therapy SIB50110 Face to face 87 Bay Street Glebe NSW 2037 Qualification articulates to Bachelor of Applied Health Science (Clinical Aesthetics) delivered by MHM Higher
Human Resources Management System Pay Entry Calendar
Human Resources Management System Pay Entry Calendar http://www1.umn.edu/ohr/payroll/calendars/index.html Important Information The system is unavailable for entry, due to maintenance, during the following
Centers of Academic Excellence in Cyber Security (CAE-C) Knowledge Units Review
Centers of Academic Excellence in Cyber Security (CAE-C) Knowledge Units Review Review Process The Knowledge Unit (KU) Review Calendar divides the entire CAE-C KU list into 12 months for the purposes of
How To Get A Certificate From Ms.Net For A Server Server
Last Activity Recorded : December 19, 2014 Microsoft Certification ID : 2665612 MARC GROTE Wittorfer Strasse 4 Bardowick, Lower Saxony 21357 DE grotem@it-training-grote.de ACTIVE MICROSOFT CERTIFICATIONS:
Proposal to Reduce Opening Hours at the Revenues & Benefits Coventry Call Centre
Proposal to Reduce Opening Hours at the Revenues & Benefits Coventry Call Centre Proposal To change the opening hours of the Revenues & Benefits Call Centre to 9am until 5pm Monday to Friday with effect
Legislative Brief: PAY OR PLAY PENALTIES LOOK BACK MEASUREMENT METHOD EXAMPLES. EmPowerHR
EmPowerHR Legislative Brief: PAY OR PLAY PENALTIES LOOK BACK MEASUREMENT METHOD EXAMPLES The Affordable Care Act (ACA) imposes a penalty on applicable large employers (ALEs) that do not offer health insurance
1.2 For piping systems that operate at hoop stress of 20% or more of the Specified Minimum Yield Strength the following shall apply.
1.0 JOINT FIT-UP AND ALIGNMENT 1.1 For piping systems that operate at hoop stress of less than 20% and the internal adjoining ends do not vary more than 1 / 8 in. and adequate penetration and fusion can
Application of Welding Standards in Hong Kong. S. K. Babu Laboratory Manager - Foundation Techniques Ltd
Application of Welding Standards in Hong Kong S. K. Babu Laboratory Manager - Foundation Techniques Ltd Introduction: This paper summarizes the current welding standards practiced in Hong Kong & also outlines
Supply Quality Assurance
Supply Quality Assurance Electric / Gas T&D, Hydro, Solar and Fossil Fuel Power Generation 2014 Supplier Conference Jim Adamson Director, Supplier Quality Assurance Engaging With Suppliers How Supplier
Yield Reduction due to Shading:
1x4 1x16 10 x CBC Energy A/S x Danfoss Solar Inverters CBC-40W Poly 40 W TLX 1,5k 5 ; 1x11 3x4 0 1,5kW 1536 x CBC Energy A/S 1 x Power-One CBC-40W Poly 40 W TRIO-7,6-TL-OUTD 30 ; 4x14 0 7,6kW Location:
TVN Service Report June 2014
1 Service Availability The SLA target sets a minimum of 99.7% availability for each customer, averaged over a 12 month rolling period Periods of scheduled and emergency maintenance are discounted when
PTC Creo 2.0 Hardware Support Dell
PTC Creo 2.0 Hardware Support Dell Last updated: February 2, 2016 The Desktop Virtualization Environment Support Dell table displays at the end of this document, after the standard Creo certification table.
Interest Rates. Countrywide Building Society. Savings Growth Data Sheet. Gross (% per annum)
Interest Rates (% per annum) Countrywide Building Society This is the rate of simple interest earned in a year (before deducting tax). Dividing by 12 gives the monthly rate of interest. Annual Equivalent
Employers Compliance with the Health Insurance Act Annual Report 2015
Employers Compliance with the Health Insurance Act Annual Report 2015 ea Health Council Health Council: Employers Compliance with the Health Insurance Act 1970 Annual Report 2015 Contact us: If you would
Nasdaq Dubai TRADING HOLIDAYS AND SETTLEMENT CALENDAR 2016 - REVISION For Equities Outsourced to the DFM (T+2)
Nasdaq Dubai Notice No : 68/15 Date of Issue : 17 December 2015 Date of Expiry : Upon issue of replacement Circular Nasdaq Dubai TRADING HOLIDAYS AND SETTLEMENT CALENDAR 2016 - REVISION For Equities Outsourced
Reacting to the Challenges: Business Strategies for Future Success. Todd S. Adams, Chief Executive Officer Adams Bank & Trust Ogallala, Nebraska
Reacting to the Challenges: Business Strategies for Future Success Todd S. Adams, Chief Executive Officer Adams Bank & Trust Ogallala, Nebraska Adams Bank & Trust Family Owned for 95 Years $525 Million