RAKU-TOOL Boards USA. There is a solution for every challenge: RAKU-TOOL.
|
|
- Monica Gilbert
- 7 years ago
- Views:
Transcription
1 USA RAKU-TOOL Boards There is a solution for every challenge: RAKU-TOOL. Curbell Plastics is a proud supplier of Rampf materials CURBELL
2 RAKU-TOOL Boards 2 3 We find solutions for your applications Performance proven solutions with RAKU-TOOL.
3 RAMPF discover the future Modeling and Working Boards. RAKU-TOOL styling (SB), modeling (MB) and working boards (WB) stand for high mechanical properties and continuous quality. The materials are shaped manually or machined easily using the correct tools. Styling (SB)» Styling & Design Models» Program proving Key Properties:» Easily shaped and machined Modeling (MB)» Master Models» Cubing Models» Patterns Key Properties:» Very fine surface structure Tools (WB)» Metalforming Tools» Foundry Patterns» Core Boxes» Jigs and Fixtures» Prepreg Lay Up Tools Key Properties:» Excellent mechanical properties
4 RAKU-TOOL Boards 4 5 RAKU-TOOL Styling & Modeling Boards SB-0160 SB-0240 SB-0320 SB-0470 Design & Styling with RAKU-TOOL Color Light gray Light green Apricot Apricot Density (ISO 1183) g/cm 3 lb/ft Applications Key properties Styling & design models Data control models Supporting structures for Close Contour Paste» Light weight and smooth surface» Easily shaped, low dust» Resistant to organic solvents Styling & design models Data control models» Good surface structure» Easily shaped and machined» Resistant to organic solvents Styling & design models Data control models» Very good surface structure» Easily shaped and machined Styling & master models» Very good surface structure» Easily machined Hardness (ISO 868) Shore D Coefficient of thermal expansion (ISO 11359) 10-6 K -1 in/in/ 0 Fx Deflection temperature (ISO 75) C F Compressive strength (ISO 604) Flexural strength (ISO 178) Dimensions mm in 4 x 24 x 96 6 x 24 x 96 8 x 24 x 96 2 x 48 x 96 6 x 48 x , ,400 2, , ,400 2,100 4 x 24 x 96 8 x 24 x 96 2 x 48 x 96 4 x 48 x 96 6 x 48 x 96 4 x 24 x 96 6 x 24 x 96 8 x 24 x 96 2 x 48 x 96 4 x 48 x 96 6 x 48 x x 500x x19.7x x 500x x19.7x x 500x x19.7x 59.1» EP-2305/EH » EP-2305/EH » EP-2305/EH Bonding with RAKU-TOOL Mixing ratio (pbw) 100 : : : 30 Color Apricot Apricot Apricot Pot life (min.) Minimum curing time (h) » UP-4301/UH-4901» UP-4301/UH-4901» UP-4301/UH-4901 Repair with RAKU-TOOL Mixing ratio (pbw) 100 : : : 1 3 Color Apricot Apricot Apricot Pot life (min.) Minimum curing time (h)
5 RAMPF discover the future Modeling boards are used for master models, cubing models, presentation models, design and shape studies. MB-0540 MB-0600 MB-0670 Modeling with RAKU-TOOL Color Light brown Brown Brown Density (ISO 1183) g/cm 3 lb/ft Applications Key properties Master & cubing models Patterns» Easily shaped and machined» Low coefficient of thermal expansion Master & cubing models Patterns» Easily shaped and machined» Low coefficient of thermal expansion Hardness (ISO 868) Shore D Coefficient of thermal expansion (ISO 11359) 10-6 K -1 in/in/ 0 Fx10-6 Deflection temperature (ISO 75) C F Compressive strength (ISO 604) Flexural strength (ISO 178) Dimensions mm in 75 x 500x x19.7x 59.1 NEW! Eco-board Master & cubing models Patterns» Easily shaped and machined» Low coefficient of thermal expansion ,500 2, ,100 2, , ,900 2, ,100 2, ,900 3, x 500x x19.7x x 500x x19.7x x 500x x19.7x x 500x x19.7x x 500x x19.7x x 500x x19.7x 59.1 Bonding with RAKU-TOOL» EP-2306/EH » EP-2306/EH » EP-2306/EH Mixing ratio (pbw) 100 : : : 30 Color Brown Brown Brown Pot life (min.) Minimum curing time (h) » UP-4310/UH-4900» UP-4310/UH-4900» UP-4310/UH-4900 Repair with RAKU-TOOL Mixing ratio (pbw) 100 : : : 1 3 Color Brown Brown Brown Pot life (min.) Minimum curing time (h)
6 RAKU-TOOL Boards 6 7 RAKU-TOOL Working Boards Tool making with RAKU-TOOL MB-0720 WB-0700 WB-0801 Color Brown Light green Gray Density (ISO 1183) g/cm 3 lb/ft Applications Key properties Master & cubing models Patterns» Excellent surface structure» Low coefficient of thermal exp.» Good compressive and flexural strength Lay up tools for pre-preg High temperature applications Vacuum forming molds» Very fine surface structure» Very easily machined» Temperature resistance up to 135 C Master models Cubing models Tooling jigs and fixtures Vacuum forming tools Hardness (ISO 868) Shore D Coefficient of thermal expansion (ISO 11359) 10-6 K -1 in/in/ 0 Fx Deflection temperature (ISO 75) C F Compressive strength (ISO 604) Flexural strength (ISO 178) Dimensions mm in 25 x 500x x19.7x x 500x x19.7x x 500x x19.7x x 500x x19.7x » High HDT and very low CTE» Good compressive and flexural strength ,800 3, ,100 7, ,800 6, ,500 4, ,200 5, ,100 5, x 500x x19.7x x 500x x19.7x x 500x x19.7x x 500 x x 19.7 x x 500 x x 19.7 x x 500 x x19.7 x x 500 x x19.7 x x 500 x x19.7 x 59.1» EP-2306/EH » EP-2304/EH-2934» EL-2210/EH-2910* Bonding with RAKU-TOOL Mixing ratio (pbw) 100 : : : 60 Color Brown Green Transparent Pot life (min.) Minimum curing time (h) » UP-4310/UH-4900» UP-4320/UH-4920 Repair with RAKU-TOOL Mixing ratio (pbw) 100 : : 3 5 Color Brown Green Pot life (min.) Minimum curing time (h) Repair with adhesive bonded inserts *Different mix ratios for special mixtures see technical data sheet.
7 RAMPF discover the future Working boards are used for metal forming, hammer forms, foundry patterns, molds, jigs and lay up tools. WB-1405 WB-1450 WB-1700 Tool making with RAKU-TOOL Color Red Brown Dark gray Density (ISO 1183) g/cm 3 lb/ft Applications Key properties Pattern plates and core boxes Machined negatives and positives Models, molds and tools Hammer forms» Dense surface structure» Very easily machined» Good abrasion resistance and impact strength Foundry patterns and core boxes» Very dense surface» Easily machined» High mechanical properties Hardness (ISO 868) Shore D Coefficient of thermal expansion (ISO 11359) 10-6 K -1 in/in/ 0 Fx a Deflection temperature (ISO 75) C F Compressive strength (ISO 604) Flexural strength (ISO 178) Dimensions mm in 30 x 500 x x 19.7 x x 500 x x 19.7 x x 500 x x19.7 x x 500 x x19.7 x x 500 x x19.7 x 39.4 NEW! Eco-board Metal forming tools Vacuum forming molds, jigs Foam molds, rapid prototyping molds » Very dense surface structure, can be polished» Easily machined» Good temperature resistance» Excellent compressive strength» High abrasion resistance ,300 13, ,200 10, ,800 18, ,600 13, ,200 10, ,000 12, x 500 x x 19.7 x x 500 x x 19.7 x x 500 x x 19.7 x x 500 x x 19.7 x 29.5» EL-2210/EH-2910*» PP-3310/PH-3905» EL-2210/EH-2910*» EL-2210/EH-2910* Bonding with RAKU-TOOL Mixing ratio (pbw) 100 : : : : 60 Color Transparent Beige Transparent Transparent Pot life (min.) Minimum curing time (h) Repair with RAKU-TOOL» PC-3451/PH-3952 Mixing ratio (pbw) 100 : 60 Color Repair with adhesive Light beige Pot life (min.) bonded inserts Minimum curing time (h) 16 Repair with adhesive bonded inserts RAMPF Tooling
8 RAMPF Tooling in the NAFTA region. Version 2011/02 Errors excepted. Subject to change. Our recommendations on the use of the material are based on many years of experience and current scientific and practical knowledge. They are, however, provided without any obligation on our part and do not relieve the buyer of the need for suitability tests. They do not constitute a legal relationship, nor are any protected third party rights whatsoever affected thereby. No liability accepted for misprints. RAMPF Group, Inc. P.O. Box Century Ct. Wixom, MI 48393, USA T +1 (248) F +1 (248) E info@rampf-group.com
Advanced Materials. Marine. Selector guide
Marine Advanced Materials Selector guide For plug, mould, finished parts and repairs, Huntsman Advanced Materials enhances value to customers by providing new patented technologies, together with high
More informationAdvanced Materials. From design to parts manufacturing. Tooling solutions selector guide
Advanced Materials From design to parts manufacturing Tooling solutions selector guide Rely on us with confidence A global partner As a global partner and innovator working in close collaboration with
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationThermal Adhesives Ther-O-Bond 1500
Products / Interface Materials / Adhesives Adhesives Bond 1500 Epoxy casting system for potting and encapsulation Bond 1600 Two part epoxy for bonding Bond 2000 Rapid cure acrylic adhesive bond High strength
More information3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin
3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin Data Sheet April 2013 Description 3M Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class
More informationProduct Guide Specification
Stabilit America, Inc., dba Glasteel June 2005 285 Industrial Drive Moscow, Tennessee 38057 Toll Free (800) 238-5546 Phone (901) 877-3010 Fax (901) 877-1388 Web Site www.glasteel.com Product Guide Specification
More informationStereolithography Material Properties
Details Stereolithography Standard lead time: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: From 2 days, depending on the size of the parts and the number of components.
More informationScotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
More informationTECHNICAL DATA SHEET
EPOXY - NG1001 Formulated Resin System for Pre-preg Process General information Description: TECHNICAL DATA SHEET EPOXY - NG1001 is a formulated epoxy based resin system for hot melt pre-preg and pressure
More informationGreen Thread Product Data
Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using
More information2009-12-23 ICS: 93.160. Strengthening retrofitting of reinforced concrete structures by gluing of fibre reinforced polymeric fabrics (FRP fabrics)
36888 ежглеяис тгс йубеямгсеыс (теувос еутеяо) 20091223 ICS: 93160 150114010801:2009 H HELLENIC CHNICAL SPECIFICATION (FRP ) Strengthening retrofitting of reinforced concrete structures by gluing of fibre
More informationSILICONE PRODUCTS FOR THE ELECTRONICS INDUSTRY CREATING TOMORROW S SOLUTIONS
SILICONE PRODUCTS FOR THE ELECTRONICS INDUSTRY CREATING TOMORROW S SOLUTIONS BONDING, SEALING, COATING, ENCAPSULATION: PROCESSES IN THE ELECTRONICS INDUSTRY BOLTING, SOLDERING, RIVETING: WHY NOT JUST BOND?
More informationTechnical Data Sheet February 2014
Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products
More informationAutomotive Engineered Attachment Systems
Automotive Engineered Attachment Systems (TR-12721) Technical Data Sheet Acrylic Foam RT8000 Series General Information : The acrylic Foam RT8000 Series, which is made by a special process, has a superior
More information3M Thermally Conductive Epoxy Adhesive TC-2810
Technical Data August 2014 3M Thermally Conductive Epoxy Adhesive TC-2810 Product Description 3M Thermally Conductive Epoxy Adhesive TC-2810 is a thermally conductive 2-part epoxy using boron nitride (BN)
More informationSeries 4000 Fiberglass Pipe and Fittings
Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing
More informationFLEX-WRAP Foam Pipe Wrap
FLEX-WRAP Foam Pipe Wrap Flex-wrap Inexpensive Used to wrap all pipes in a concrete pour Satisfies UPC Code Sec.315.7 Provides true expansion space between pipe and a concrete pour Product # Dimesions
More informationSOLAR SOLUTIONS BONDED MOUNTING TECHNOLOGY. DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil
SOLAR BONDED MOUNTING TECHNOLOGY DURABLE BONDING OF PV MODULES TO MOUNTING SYSTEMS WITH Sikasil ADDED VALUE BY BONDING OF MODULES TO MOUNTING SYSTEMS SUITABLE IN PRODUCTION AND ON-SITE NOWADAYS PHOTOVOLTAIC
More informationAramid Fibre/Phenolic Honeycomb
Aramid Fibre/Phenolic Honeycomb Product Data Description HexWeb HRH-10 is manufactured from aramid fibre sheets. A thermosetting adhesive is used to bond these sheets at the nodes, and, after expanding
More information07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
More informationROHACELL Triple F. Complex shaped PMI Foam Cores for highly efficient FRP Composite
Complex shaped PMI Foam Cores for highly efficient FRP Composite ROHACELL Triple F Sandwich Fabrication for low to - A Novel Particle Foam high volume applications SAMPE tesdr. Kay Brazil Conference 2015
More informationFDM Material Properties
Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,
More informationScotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated
Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More informationDecoding Heat Cure Denture Base Polymers. By Tom Zaleske
Decoding Heat Cure Denture Base Polymers By Tom Zaleske 24 Journal of Dental Technology August/September 2007 s dental technicians and laboratory owners trying to survive in a global marketplace, we often
More informationPLASTIC/METAL HYBRID TECHNOLOGY. Innovative Design Solutions for Structural Performance with Weight and Cost Reduction
PLASTIC/METAL HYBRID TECHNOLOGY Innovative Design Solutions for Structural Performance with Weight and Cost Reduction LANXESS Corporation Unites Plastic and Metal to Help Manufacturers Create Products
More informationFRICTION MATERIALS & BONDING SERVICES
FRICTION MATERIALS & BONDING SERVICES World Class Friction Materials & Bonding Services The Industry Leader Midwest Brake has been a leading supplier of non asbestos industrial friction material and bonding
More informationHow To Test A Base Axe
Scotch-Weld DP760 Product Data Sheet Updated : February 2009 Supersedes: June 2001 Product Description DP760 epoxy adhesive is a non-sag, two-part room temperature curing adhesive designed for use when
More information3 Scotch-Weld TM. Urethane Adhesives 3532 B/A 3535 B/A 3549 B/A. Technical Data March, 2002
3 Scotch-Weld TM Technical Data March, 2002 Product Description 3M TM Scotch-Weld TM 3532 B/A, 3535 B/A and 3549 B/A are two-component, polyurethane adhesives which cure at room temperature or with heat
More informationCrystal Clear Sealant
Crystal Clear Sealant Technical Data February, 2012 Product Description 3M Crystal Clear Sealant is a one component thermoplastic elastomer which forms permanent elastic bonds when used in surface sealing
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More informationPC-Concrete Injectable Concrete Anchoring and Repair System
PC-Concrete Injectable Concrete Anchoring and Repair System DESCRIPTION: PC-Concrete is a two component (1:1 ratio), 100% solids, high modulus, structural epoxy paste. PC-Concrete is a solvent free, no
More informationVeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz. Quit
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz Quit Theory and Practice of Wear Definition In materials science, wear is the erosion of material from a solid
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationThe BASA Guide to the ISO 11600 Classification of Sealants for Building Construction
The BASA Guide to the ISO 11600 Classification of Sealants for Building Construction SEALANTS IN BUILDING AND CONSTRUCTION Glazing Sealants (G) Construction Sealants (F) Class 25 Class 25LM Class 25 Class
More informationStereolithography Material Properties
Details Stereolithography Standard lead time: Standard accuracy: Maximum part dimensions: From 2 working days, depending on the size of the parts and the number of components. Standard stereolithography
More informationSPREFIX SPRAY INSULATION _ in the marine market.
SPREFIX SPRAY INSULATION _ in the marine market. A self-adhesive glass or stone wool, sprayed directly onto surface.. Easily applied to wood, steel, plastic or other surfaces without any mechanical fasteners
More informationTHE ELEMENT C. Introduction graphite and carbon Lattice Classification of grain size. Properties of graphite and carbon
THE ELEMENT C Introduction graphite and carbon Lattice Classification of grain size Fine-grained graphite Coarse-grained graphite Properties of graphite and carbon High temperature properties Introduction
More informationEffective Cooling Method for Spin Casting Process
Effective Cooling Method for Spin Casting Process Yong-Ak Song, Sehyung Park, Yongsin Kwon Korea Institute of Science and Technology KIST, CAD/CAM Research Center P.O. Box 131, Cheongryang, Seoul, Korea
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More informationTECHNICAL DATA SHEET GRILON BG-15 S
TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy
More informationDELRIN HYTREL MINLON RYNITE
ddupont Engineering Polymers Design Check Chart DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON RYNITE ZYTEL DELRIN HYTREL MINLON
More informationSD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA)
1) Product Description: SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) General Purpose ABS, SD 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high
More informationPLEXIGLAS SUNACTIVE GS. For a Better Feeling
PLEXIGLAS SUNACTIVE GS For a Better Feeling PLEXIGLAS SUNACTIVE GS For a Better Feeling A perfect tan and a feeling of wellbeing are two important sales factors for tanning beds. To enable you to convincingly
More informationUNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
More informationENGINEERED QUARTZ STONE
ENGINEERED 2 QUARTZ STONE 18 GOOD INDUSTRY PRACTICES 2 ENGINEERED QUARTZ STONE Natural stones, especially granite, have been used for flooring and countertop material in high-end homes for its beauty and
More informationIn-mold Labeling Micro Powder Injection Molding: Large Scale Production of Micro Structured Two-component Parts
In-mold Labeling Micro Powder Injection Molding: Large Scale Production of Micro Structured Two-component Parts E.Honza, V.Piotter, K.Plewa Karlsruhe Institute of Technology (KIT) elvira.honza@kit.edu
More informationMaterial data sheet. EOS StainlessSteel GP1 for EOSINT M 270. Description, application
EOS StainlessSteel GP1 for EOSINT M 270 A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS StainlessSteel GP1 is a
More informationManufacturing Quality Concrete Products
CEMEX USA - Technical Bulletin 8.0 Manufacturing Quality Concrete Products Establishing or Upgrading a Quality Program Overview The following guidelines were developed for MCP (manufactured concrete products)
More information3 Scotch-Weld TM. Epoxy Adhesive DP110 Translucent and Gray. Technical Data December, 2009
3 TM Technical Data December, 2009 Product Description 3M are two-part epoxy adhesives which combine a fast cure with flexibility. Features Controlled flow 20 minute handling strength Duo-Pak cartridge
More informationTemperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
More informationHeat Treatment Process
Heat Treatment Process Holytown, Scotland UK Resistors - Insulation - Protection Chongqing, China C/C fixturing, rods & beams Insulation St-Marys, USA Gennevilliers, France Main production sites Industrial
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
More informationHexWeb CR III Corrosion Resistant Specification Grade Aluminum Honeycomb
Corrosion Resistant Specification Grade Aluminum Honeycomb Description 5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gauges.
More informationIntroduction to Manufacturing Process
Introduction to Manufacturing Process What is Manufacturing? The English word manufacture is several centuries old. The term manufacture comes from two Latin words, manus (hand) and factus (make). As per
More informationSurface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment
Surface Engineering Solutions Rebuild, Repair and Protect Industrial Equipment Whatever You Rebuild, Repair and Protect...... Find the Right Solution! Henkel's Solutions for all Surface Engineering Needs
More informationRedux Film Adhesives, Foaming Films, Primers and Liquid Shims. About HEXCEL
About HEXCEL Hexcel is the largest US producer of carbon fibre; the world s largest weaver of structural fabrics; the number one producer of composite materials such as prepregs, film adhesives and honeycomb;
More informationReworkability of DBA Adhesives. March 2013
Reworkability of DBA Adhesives March 2013 Topics DuPont s Philosophy for Rework How to disassemble bonded module - Manual - Automation How to clean residual adhesive - Chemical method - Mechanical method
More informationCL001-V Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021C), blue (286C), black and red (185C).
Page 1 Custom USB Drives Custom USB Drives Page 1 CL001-V Classic swivel USB drive with silver clip. Available in 5 colors: white, orange (021C), blue (286C), black and red (185C). CL001-S Classic swivel
More informationSC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications
More informationUDDEHOLM VANADIS 30 SUPERCLEAN
UDDEHOLM VANADIS 30 SUPERCLEAN UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based on
More informationSaint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
More informationHow to Build a Printed Circuit Board. Advanced Circuits Inc 2004
How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production
More informationRTV159. RTV157 and RTV159 High Strength Silicone Adhesive Sealants
RTV159 RTV157 and RTV159 High Strength Silicone Adhesive Sealants Product Description RTV157 and RTV159 are one-component, ready-to-use, high strength silicone rubber adhesive sealants. They cure to tough
More informationBIS Metal Pipe Clamps with Lining
A BIS Metal Pipe Clamps with Lining BIS Clamps BISMAT Flash BISMAT 2000 Ø ¼ - 2" BISMAT 2000 Ø 2½ - 4" 2 3 4 BIS Industrial Clamps BIS Heavy Duty Clamps HD1501 (1/2") (BUP1000) 5 BIS Clamps for Plastic
More informationRTV162. Electronic Grade Silicone Adhesive Sealant
RTV162 Product Description Electronic Grade Silicone Adhesive Sealant RTV162 adhesive sealant from GE Silicones is one-component, readyto-use electronic grade silicone sealant. It cures to a tough, resilient
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationSolution for Homework #1
Solution for Homework #1 Chapter 2: Multiple Choice Questions (2.5, 2.6, 2.8, 2.11) 2.5 Which of the following bond types are classified as primary bonds (more than one)? (a) covalent bonding, (b) hydrogen
More information3M Thermal Bonding Film AF42
Technical Data August 2015 3M Thermal Bonding Film AF42 Product Description 3M Thermal Bonding Film AF42 is an epoxy, thermoset film adhesive developed for structural bonding of metal, glass and other
More informationEOSINT P and FORMIGA P materials for plastic laser-sintering systems
EOSINT P and FORMIGA P materials for plastic laser-sintering systems Contents Pages Material data overview ALUMIDE CarbonMide PA 2200/2201 PA 2210 FR PA 3200 GF PEEK HP3 PrimeCast 101 PrimePart DC 3 6
More informationDocument Library TS Data Sheet 08609. 3M Windo-Weld Super Fast Urethane. Data Sheet. Public
Document Library TS Data Sheet 08609 Public Rev:3 Effective: 09/14/2007 Status: Active 3M Windo-Weld Super Fast Urethane Data Sheet 3M Part No.(s) 3M Part Descriptor(s) 08609 3M Windo-Weld Super Fast Urethane
More informationEXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More informationTreatment of a surface or structure to resist the passage of water in the absence of hydrostatic pressure. presence of hydrostatic pressure.
Recommend Approval: Team Leader Date Division Chief Date Approved: Director Date Maryland Department of Transportation State Highway Administration Office of Materials Technology MARYLAND STANDARD METHOD
More informationScotch-Weld. Low-Odor Acrylic Adhesives DP810 DP810 NS. Technical Data June, 2004
3 Scotch-Weld TM Technical Data June, 2004 Product Description 3M Scotch-Weld Low-Odor Acrylic Adhesive DP810 and DP810 NS are twopart, 1:1 mix ratio, toughened structural adhesives with less odor than
More informationAraldite AV 170. Advanced Materials. One component epoxy adhesive. Structural Adhesives. Key properties. Description. Product data.
Advanced Materials Araldite AV 170 Structural Adhesives Araldite AV 170 One component epoxy adhesive Key properties Cures at 140-180 C Heat resistant to 120 C Very good peel strength Good chemical resistance
More informationFire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete
Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung
More informationOptimal Wear Protection and Reliable Slide Promotion for Plant Components and Pipes
Optimal Wear Protection and Reliable Slide Promotion for Plant Components and Pipes 1 The Lining People Comprehensive Range of Wear Protection and Slide Promotion Systems Worldwide Cost of spare parts,
More informationMIT 2.810 Manufacturing Processes and Systems. Homework 6 Solutions. Casting. October 15, 2015. Figure 1: Casting defects
MIT 2.810 Manufacturing Processes and Systems Casting October 15, 2015 Problem 1. Casting defects. (a) Figure 1 shows various defects and discontinuities in cast products. Review each one and offer solutions
More informationCORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS
AN ERGONARMOR COMPANY TECHNICAL INFORMATION SPECIFICATION FOR INSTALLATION 07/11 SUPERSEDES 04/00 PAGE 1 OF 6 CORROSION ENGINEERING RESIN-BASED POLYMER CONCRETES AND GROUTS 1. SCOPE 1.1 This specification
More informationThe Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
More informationPR11 Plastic Repair, Adhesive
Uniform Procedures For Collision Repair PR11 Plastic Repair, Adhesive 1. Description This procedure describes methods for making adhesive repairs to most types of exterior and interior automotive plastics.
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationDIRECT PRINTING NYLON JACKETS. The Basics
DIRECT PRINTING NYLON JACKETS The Basics . The Nylon Jacket Types of Nylon There are three basic weaves that are commonly used to manufacture nylon jackets or outerwear. These are Taffeta, Satin and Oxford.
More informationFlexible Circuits and Interconnection Solutions
Flexible Circuits and Interconnection Solutions Introduction Our "Mission" is "to demonstrate through our unrivalled capability and service that Teknoflex sets the standard in the design, manufacture and
More informationLow Pressure Molding Solutions
Low Pressure Molding Solutions PROCESS TRADITIONAL POTTING PROCESS FLOW MOLD CASE PALLETIZE INSERT ELECTRONICS PRE-HEAT ENCAPSULATE SETTLING OR VACUUM CURE TEST LOW PRESSURE PROCESS FLOW INSERT ELECTRONICS
More informationEvaluation of M35 and M40 grades of concrete by ACI, DOE, USBR and BIS methods of mix design
Evaluation of M35 and M40 grades of concrete by ACI, DOE, USBR and BIS methods of mix design Sharandeep Singh 1, Dr.Hemant Sood 2 1 M. E. Scholar, CIVIL Engineering, NITTTR, Chandigarh, India 2Professor
More informationChoosing optimal rapid manufacturing process for thin-walled products using expert algorithm
Choosing optimal rapid manufacturing process for thin-walled products using expert algorithm Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Adam Dudziak, Maciej Kowalski, Przemysław Zawadzki Poznan
More informationMATERIALIZING VISIONS. Bohler-Uddeholm P20 Modified
MATERIALIZING VISIONS Bohler-Uddeholm P20 Modified General Bohler-Uddeholm P20 Modified is a Cr-Mo-alloyed steel which is supplied in the hardened and tempered condition. P20 Modified offers the following
More informationPart and tooling design. Eastman Tritan copolyester
Part and tooling design Eastman Tritan copolyester Part and tooling design Process Part design Tooling design High cavitation considerations Process Process Project development flow chart Concept OEM generates
More informationFlocking of textiles. Flocked shirt 13. flocking drying cleaning. adhesive. application. creation
Flocking of textiles > The motif flocking is the high-class alternative to textile printing. One not only flocks sports wear for schools, sport clubs, associations etc., but also fabrics for garments,
More informationLABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO
LABORATORY DETERMINATION OF CALIFORNIA BEARING RATIO STANDARD IS: 2720 (Part 16) 1979. DEFINITION California bearing ratio is the ratio of force per unit area required to penetrate in to a soil mass with
More information2-part Epoxy primer, levelling mortar and intermediate layer
Product Data Sheet Edition 07/08/2008 Identification no: 01 08 01 02 007 0 000004 2-part Epoxy primer, levelling mortar and intermediate layer Construction Product Description Sikafloor -161 is an economic,
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationProduct Data. HexPly 8552 Epoxy matrix (180 C/356 F curing matrix)
HexPly 8552 Epoxy matrix (180 C/356 F curing matrix) Product Data Description HexPly 8552 is a high performance tough epoxy matrix for use in primary aerospace structures. It exhibits good impact resistance
More informationMICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION
MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts
More informationMILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS
MILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS May 29, 2013 Revision B Structural Guideline for Design and Installation Holes in Composite Floor Slab Terminal 3, Departure Level
More informationT A B L E T 1 T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A
T A B L E T 1 1 of 7 Tests & Inspection Cable PCUT & PCUT-A (Table T1) T E S T S A N D I N S P E C T I O N C A B L E P C U T A N D P C U T - A No. Test Scale MOC Requirements G 20:10:001:01 Defined Test
More informationLandscaping products and amenities /
ARMTEC.COM Landscaping products and amenities / PRODUCT GUIDE INNOVATIVE ROOF SLABS CREATE FUNCTIONAL AND ATTRACTIVE SPACES Versatile Superior quality Cost-effective BALLAST-LOK Armtec s Ballast-Lok concrete
More information09/07/07 GLASSFIBER REINFORCED CEMENT (GRC) C. S. I. Spec 03500 Master Spec. 03 49 00 Page 1
C. S. I. Spec 03500 Page 1 PART 1 - GENERAL 1.01 SUMMARY:.01 Provide special glassfiber reinforced cement (GRC) shapes in accordance with the requirements of the contract documents..02 The installing contractor
More informationEngineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering. Model Training Guide
Engineering Graduate Training Scheme "A" Manufacturing & Industrial Engineering Model Training Guide 1 Model Training Guide (MTG) The Model Training Guide is, as the name suggests, a guide to Companies
More information