FLEX-WRAP Foam Pipe Wrap

Size: px
Start display at page:

Download "FLEX-WRAP Foam Pipe Wrap"

Transcription

1 FLEX-WRAP Foam Pipe Wrap Flex-wrap Inexpensive Used to wrap all pipes in a concrete pour Satisfies UPC Code Sec Provides true expansion space between pipe and a concrete pour Product # Dimesions Bag Qty. Comments #11 3/32 X 6 X Rolls per bag UPS customers ship 3 rolls per bag Most common #12 3/32 X 6 X rolls per bag #18 3/32 X 8 X rolls per bag UPS customers ship 2 ross per bag #204 1/XX50 8 rolls per bag UPS customers ship 5 rolls per bag #206 1/X6 X50 6 rolls per bag UPS customers ship 3 rolls per bag #208 1/X8 X50 4 rolls per bag UPS customers ship 2 rolls per bag Test Method lbs/ft³ Gravimetric Tensile Strength psi MD: D CD: Elongation per cent D Conpression strength at 10 deflection psi 4-7 D-1621 Water Vapor Trans. perm-in C-355 Water Absorption by volume (96 hrs) 0.3 D-2842 Co-efficient of linear expansion 10 in/in/ F 2.3 D-696 Thermal conductivity BTU/sq.ft./hr/ F/in D-2396 Maximum Temp. service F Dielectric constant at 1.0 kc 1.05 D-1673 Dissipation factor at 28 C X 1.0 kc 2.0 X Co-efficient of thermal conductivity BTU/hr/FA/ F/in 0.28kc Flammability AEB, in/atb, sec 3.0/55 D

2 FLEX-SEAL Foam sill sealer Flex-Seal A polyethylene foam strip used to reduce air filtration between the concrete foundation and the sill plate Inexpensive and Strong Creates a seal between the foundaton wall and the sill plate Conforms to variations in foundation surface Resists effects of moisture and freeze/thaw cycles Also used around window and door frames Dimesions #2035 1/ X 3.5 X 50 9 Rolls per bag UPS customers ship 6 rolls per bag #2055 1/ X 5.5 X 50 6 rolls per bag UPS customers ship 4 rolls per bag #2075 1/ X 7.5 X 50 4 rolls per bag UPS customers ship 3 rolls per bag #3035 1/2 X3.5 X25 9 Rolls per bag UPS customers ship 6 rolls per bag #3055 1/2 X5.5 X25 6 rolls per bag UPS customers ship 4 rolls per bag #3075 1/2 X7.5 X25 4 rolls per bag UPS customers ship 3 rolls per bag Test Method lbs/ft³ Gravimetric Tensile Strength psi MD: D Elongation per cent D Conpression strength at 10 deflection psi 4-7 D-1621 Water Vapor Trans. perm-in C-355 Water Absorption by volume (96 hrs) 0.3 D-2842 Co-effecient of linear expansion 10 in/in/ F 2.3 D-696 Thermal conductivity BTU/sq.ft./hr/ F/in D-2396 Maximum Temp. service F Dielectric constant at 1.0 kc 1.05 D-1673 Dissipation factor at 28 C X 1.0 kc 2.0 X Co-efficient of thermal conductivity BTU/hr/FA/ F/in 0.28kc Flammability AEB, in/atb, sec 3.0/55 D CD:

3 FLEX-GARD Foam Closet/Shower Riser Spacer Flex-Gard Creates a clean wide space around the closet or shower riser Will not stick to concrete removal is fast and easy Product # Pipe Size Height Description #24 2 Foam Shower Riser 42 per case # Foam Shower Riser #34 3 Foam Closet Riser 60 per case # Foam Closet Riser 40 per case #44 Foam Closet Riser 60 per case #46 6 Foam Closet Riser 40 per case #48 8 Foam Closet Riser 40 per case Foam Closet Riseer 36 per case Cast Iron Pipe Closet Riser #44C Test Method pcf 1.2 Cell size mm 0.8 ASTM D Pass Pass 8.1 Mil-PPP-C-1752A Flexibility: Room Temp. -65 F Compression set Compression strength psi ASTM D deflection deflection deflection 16.6 Tensile strength psi 51 ASTM D412 lb/in 20 ASTM D412 BTU/hr. FA²/ F.in Guarded Hot Plate change Avg F lb/ft² ASTM C-355 Contact Corrosivity none Dusting Abrasiveness Pass 3.0/55 ASTM D Tear strength Co-efficient of thermal conductivity (k) Thermal stability Maximum temp. service Water aborption Water Vapor Transmission Flammability AEB.in./ATB, sec 3

4 FLEX-SLEEVE Poly Pipe Sleeve Flex-Sleeve Made with higher density polyethylene film offering : Stronger tube when compared to the competition of equal gauge More rigid tube for easier push on installation Resistant to acids and alkaline to better protect the pipe Color Pipe Size Feet per roll Gauge #100 Black rolls per case #101 Orange rolls per case #102 Blue rolls per case # rolls per case #104 Red rolls per case #108BK Black 1-1/ rolls per case #108BL Blue 1-1/ rolls per case #108C 1-1/ rolls per case #108R Red 1-1/ rolls per case # roll # roll # roll # roll # roll # roll ASTM gms/cc D1505 Melt Index gms/10 min D D D (High) D1894 Haze Gloss at 45 Degrees COF (Slip) Yield MVTR GTR (Oxygen) 30,000 sq in/lb 1.0 gms E cc D1434 Resin FDA Approved Tensile Ultimate MD: 4400 psi D882 TD: 4000 psi Elongation Ultimate MD: 500 D882 TD: 600 Elmendorf Tear Strength MD: 230 gms D1922 TD: 900 gms Dart Impact gms D1709

5 FLEX-SLEEVE Precut Flex-Sleeve Pre-cut 30 precut lengths Reduces labor in the fabrication shop Less waste when consistancy of size is required #101C #102C #104C Color Orange Blue Red Pipe Sizes Gauge Box Quantity 80 pieces cut to pieces cut to pieces cut to gms/cc gms/10 min (High) 30,000 sq in/lb 1.0 gms cc FDA Approved MD: 4400 psi TD: 4000 psi MD: 500 TD: 600 MD: 230 gms TD: 900 gms 110 gms Melt Index Haze Gloss at 45 Degrees COF (Slip) Yield MVTR GTR (Oxygen) Resin Tensile Ultimate Elongation Ultimate Elmendorf Tear Strength Dart Impact 50 Case Quantity 20 boxes 20 boxes 20 boxes ASTM D1505 D1238 D1003 D2457 D1894 E96 D1434 D882 D882 D1922 D1709 5

6 FLEX-SLEEVE 32 mil Pipe Sleeve Flex-Sleeve 32 mil 32 mil thickness Satisfies local codes requiring thicker sleeve Ideal for push on installation Color Pipe Sizes Gauge Feet per roll Case Quantity #402 Blue 32 mil rolls #404 Red 32 mil rolls ASTM gms/cc D1505 Melt Index gms/10 min D1238 Haze 8-12 D1003 Gloss at 45 Degrees D2457 COF (Slip) (High) D1894 Yield 30,000 sq in/lb MVTR 1.0 gms E96 GTR (Oxygen) cc D1434 Resin FDA Approved Tensile Ultimate MD: 4400 psi D882 TD: 4000 psi Elongation Ultimate MD: 500 D882 TD: 600 Elmendorf Tear Strength MD: 230 gms D1922 TD: 900 gms Dart Impact gms D1709 6

7 HANDI-CAP WRAP Handi-Cap Wrap Used to Wrap P traps & supplies in public restrooms Designed for wrapping P traps and supplies Pressure sensitive adhesive backing Installs fast Economical Will cover any P trap with any angle or any shape #120WHT #120BLK Description 1/8 X2 X40 1/8 X2 X40 Tensile Strength Elongation Tear Strength Compression Strength at 25 Compression Set (thickness) Thermal Stability ( of chg at 158 for 24 hrs) Thermal Conductivity (btu/hr/ F) Working Temp. range Water Absorption (lb/ft/ F) Flammability (MVSS302) 24 rolls per case 24 rolls per case PCF lb/in < F to 175 F <.06 pass available 7

8 HANDI-CAP COVER Handi-Cap Cover Protects wheelchair users from exposed pipes in public restrooms Easy to use Quick installation Ecomomical to buy Actually insulates the hot pipes and supplies Stratigically placed closure strips make the cover stay put Available in white and black Complies with ADA requirements #12002WHT #12002BLK #12003WHT #12003BLK #12004WHT #12004BLK #12024WHT #12024BLK Description WHITE P Trap Cover BLACK P Trap Cover WHITE P Trap Cover with One Supply Cover BLACK P Trap Cover with One Supply Cover WHITE P Trap Cover with Two Supply Covers BLACK P Trap Cover with Two Supply Covers WHITE 2 Handi-Cap Extension Cover BLACK 2 Handi-Cap Extensiion Cover Tensile Strength Elongation Tear Strength Compression Strength at 25 Compression Set (thickness) Thermal Stability ( of chg at 158 for 24 hrs) Thermal Conductivity (btu/hr/ F) Working Temp. range Water Absorption (lb/ft/ F) Flammability (MVSS302) 8 PCF lb/in < F to 175 F <.06 pass available

9 PLUMBERS FELTAdhesive Backed Felt Plumbers Felt Available in custom widths from 5/8 inches to 40 inches Adhesive backed felt Used in pipe hangers and pipe clamps Isolates pipes and stops electrolysis Used to wrap DWV, especially between floors to reduce sound transmission reduces pipe movement and vibration Dimensions Package Qty. Comments #160 3/16 X2 X25 Most Common #161 3/16 X5/8 X25 72 per case #162 3/16 X3/X25 64 per case #163 3/16 X1 X25 48 per case #164 3/16 X1-1/2 X25 32 per case #170 1/X2 X25 #171 1/X5/8 X25 72 per case #172 1/X3/X25 64 per case #173 1/X1 X25 48 per case #174 1/X1-1/2 X25 32 per case #180 1/8 X2 X25 #181 1/8 X5/8 X25 72 per case #182 1/8 X3/X25 64 per case #183 1/8 X1 X25 48 per case #184 1/8 X1-1/2 X25 32 per case Most Common Most Common S.A.E. Color Grey Felt Specifications Grey #F-15 Grey Thickness/Nominal 1/8 3/16 1/ Thickness/Limits In Weight/oz. per Sq. yard specific gravity Actual Wool content Carbontet/Soluble Max Water Soluble Max Combined Carbontet/Water Soluble Ash Max Tensile Strength Min. Splitting resistence Min. 9

10 PLUMBERS FELT Non-Adhesive Non-Adhesive Plumbers Felt Used in pipe hangers and pipe clamps Isolates pipes and stops electrolysis Used to wrap DWV, especially between floors to close off openings reduces pipe movement and vibration #165 #175 Dimensions 3/16 X2 X25 1/X2 X25 24 rolls per case 24 rolls per case Needle Punched Felt Color Thickness/Nominal Thickness/Limits In. Weight/oz. per Sq. yard 1 specific gravity Actual Wool content Carbontet/Soluable Max. Water Soluable Max. Combined Carbontet/Water Soluble Ash Max. Tensile Strength Min. Splitting Resistence Min. 10 S.A.E. Grey 1/ Felt Specifications Grey 3/ #F-26 Grey 1/

11 PLUMBERS FELT Metal Back Metal Backed Plumbers Felt Used in pipe hangers and pipe clamps Isolates pipes and stops electrolysis Required on some commercial application.025 gauge aluminum backing Dimensions #165M 3/16 X2 X25 24 rolls per case #175M 1/X2 X25 24 rolls per case Needle Punched Felt S.A.E. Felt Specifications #F-26 Color Grey Grey Grey Thickness/Nominal 1/8 3/16 1/ Thickness/Limits In Weight/oz. per Sq. yard specific gravity Actual Wool content Carbontet/Soluble Max Water Soluble Max Combined Carbontet/Water Soluble Ash Max Tensile Strength Min. Splitting resistence Min. 11

12 INSUL-TAPE Adhesive Backed Tape Insul-Tape Convenient to wrap and insulate fitting, valves, or short runs of pipe Pressure sensitive adhesive backing Installs fast Economical #150 #151 #154 Description 1/8 X2 X30 1/8 X1/2 X30 1/8 X1 X30 24 rolls per case 96 rolls per case 48 rolls per case Tensile Strength Elongation Tear Strength Compression Strength at 25 Compression Set (thickness) Thermal Stability ( of chg at 158 for 24 hrs) Thermal Conductivity (btu/hr/ F) Working Temp. range Water Absorption (lb/ft/ F) Flammability (MVSS302) 12 PCF lb/in Comments Most Common < F to 175 F <.06 pass available

13 CURBING FOAMAdhesive Backed Foam Curbing Creates excellent seal between HVAC unit and Plenum Can be stacked for greater thickness Economical Installs fast Adhesive backed #305 Description 1/2 X 1-1/2 X 15 Tensile Strength Elongation Tear Strength Compression Strength at 25 Compression Set (thickness) Thermal Stability ( of chg at 158 for 24 hrs) Thermal Conductivity (btu/hr/ F) Working Temp. range Water Absorption (lb/ft/ F) Flammability (MVSS302) 25 per bundle PCF lb/in < F to 175 F <.06 pass available 13

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying

More information

3 Single-Coated Foam Tapes

3 Single-Coated Foam Tapes 3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,

More information

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use

More information

SECTION 15190 HVAC INSULATION. A. All work specified in this Section is subject to the provisions of Section 15010.

SECTION 15190 HVAC INSULATION. A. All work specified in this Section is subject to the provisions of Section 15010. SECTION 15190 HVAC INSULATION PART ONE - GENERAL PART 1 - GENERAL 1.01 DESCRIPTION A. All work specified in this Section is subject to the provisions of Section 15010. B. All insulation products shall

More information

Thermal Adhesives Ther-O-Bond 1500

Thermal Adhesives Ther-O-Bond 1500 Products / Interface Materials / Adhesives Adhesives Bond 1500 Epoxy casting system for potting and encapsulation Bond 1600 Two part epoxy for bonding Bond 2000 Rapid cure acrylic adhesive bond High strength

More information

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware. 14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined

More information

Pipe Protection Tape System

Pipe Protection Tape System Pipe Protection Tape System PASCO All Weather Pipe Protection Tape is a pure physical barrier that is moisture proof, inert and non-conducting. Whether the need is to protect overhead piping in industrial

More information

Double Coated Urethane Foam Tapes

Double Coated Urethane Foam Tapes 3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data April, 2009 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear

More information

Fiberglas, Exterior Wall Thermal Insulation

Fiberglas, Exterior Wall Thermal Insulation PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.

More information

COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET

COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET [METRIC] A-A-59135 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION PACKAGING MATERIAL, SHEET The General Services Administration has authorized the use of this commercial

More information

THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST

THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST Instruction: Check each test method for which you are requesting accreditation. An asterisk beside the NVLAP Test Method Code indicates that proficiency

More information

DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION

DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION SECTION 230713- ALUMAGUARD ENGINEER SPECIFICATION DIVISION 23 HEATING, COOLING, AIR CONDITIONING AND VENTILATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract,

More information

DuPont Kapton HN. polyimide film

DuPont Kapton HN. polyimide film DuPont Kapton HN polyimide film Technical Data Sheet DuPont Kapton HN general-purpose film has been used successfully in applications at temperatures as low as -269 C (-452 F) and as high as 400 C (752

More information

KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET

KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET 1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

HKAS666O ANTI-STATIC NYLON FILM

HKAS666O ANTI-STATIC NYLON FILM DATA SHEETS HKAS666O ANTI-STATIC NYLON FILM HKAS666O is a specially formulated nylon film based on nylon 6 polyamide resin. This film is a tough, versatile film which is ideally suited for physically demanding

More information

Residential Foundations and Basements

Residential Foundations and Basements Residential Foundations and Basements Disclaimer All of the following information is based on the 2006 International Residential Code with Kentucky Amendments. As some information is paraphrased, article

More information

A. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.

A. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein. 13310 FABRIC SHADE STRUCTURES FOR PLAYGROUND AREAS ************************************************************************************************************************ SPECIFIER: CSI Master Format

More information

SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET*

SUBMITTAL 10 FEET. Cast Iron Soil Pipe Products Hubless Pipe & Fittings HUBLESS PIPE 10 FEET* QUALITY SYSTEM SUBMITTAL Hubless Pipe & Fittings R E G I S T R AT I O N Manufacturer s T J B 10 FEET HUBLESS PIPE 10 FEET* NOM. SIZE B INSIDE DIAMETER J OUTSIDE DIAMETER 1 1/2 1.50 1.90 0.16 0.13 28.4

More information

Product Information Sheet. Fiberfrax Blanket and Mat Products

Product Information Sheet. Fiberfrax Blanket and Mat Products Product Information Sheet Fiberfrax Blanket and Mat Products Introduction The Fiberfrax blanket and mat product family is a group of lightweight, thermally efficient ceramic fiber insulating materials

More information

Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description

Scotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description 3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,

More information

Eastar copolyester 6763. technical information

Eastar copolyester 6763. technical information Eastar copolyester 73 technical information Contents Eastar copolyester 73 Properties Optical Thermal and rheological Burning characteristics Chemical resistance 5 Barrier properties 5 Weatherability 5

More information

B. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation

B. ASTM C 533 Calcium Silicate Block and Pipe Thermal Insulation. C. ASTM C 547 Mineral Fiber Preformed Insulation PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Product Guide Specification

Product Guide Specification Stabilit America, Inc., dba Glasteel June 2005 285 Industrial Drive Moscow, Tennessee 38057 Toll Free (800) 238-5546 Phone (901) 877-3010 Fax (901) 877-1388 Web Site www.glasteel.com Product Guide Specification

More information

Green Thread Product Data

Green Thread Product Data Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using

More information

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS

More information

The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes.

The surface roughness of the polyurethane lining is 10 times lower than cement-lined pipes. QUALITY INSIDE When it comes to long life piping for drinking water, sewage, industrial water or gas, there is one name that continues to lead the way - ECOPUR by vonroll. Delivering precision-engineered

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

Flexible Spill Containment Protecting You And The Environment

Flexible Spill Containment Protecting You And The Environment Flexible Protecting You And The Environment Unit Liner Company C o nta i n m ent Syste m s C o nta i n m ent Syste m s Foam Foam Clean and store for repeated use Includes Clean and patch store kit for

More information

GUARDRAIL POST STEEL

GUARDRAIL POST STEEL GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating

More information

3M Thermal Bonding Film AF42

3M Thermal Bonding Film AF42 Technical Data August 2015 3M Thermal Bonding Film AF42 Product Description 3M Thermal Bonding Film AF42 is an epoxy, thermoset film adhesive developed for structural bonding of metal, glass and other

More information

B. Types of mechanical insulation specified in this section include the following:

B. Types of mechanical insulation specified in this section include the following: SECTION 23 0700 HVAC INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Extent of mechanical insulation required by this section is indicated on drawings and schedules, and by requirements of this section. B.

More information

Product Guide Specification

Product Guide Specification Reef Industries, Inc. 9209 Almeda Genoa Rd. Houston, Texas 77075 Toll Free (800) 231-6074 Phone (713) 507-4251 Fax (713) 507-4295 Web Site www.reefindustries.com E-Mail ri@reefindustries.com Product Guide

More information

MaxCell Technical Manual Design Parameters

MaxCell Technical Manual Design Parameters MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

3M Dual Lock Reclosable Fastener

3M Dual Lock Reclosable Fastener 3 Dual Lock Reclosable Fasteners SJ3550CF (Type 250) SJ3551CF(Type 400) SJ3552CF(Type 170) Dual Lock Reclosable Fastener Black with a clear acrylic adhesive Product Information February, 2007 Product Description

More information

SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS

SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS 1 SECTION 05 7360 ALUMINUM HANDRAIL AND RAILING SYSTEMS WITH DECORATIVE METAL PANEL INFILLS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and

More information

AIRTECH Lamination System

AIRTECH Lamination System AIRTECH Lamination System The AIRTECH Lamination System is a system of products designed and manufactured utilizing our unique multilayer manufacturing technology. This provides the user with high performing,

More information

Cable Tie Mounting Bases

Cable Tie Mounting Bases Temperature Rating: 0ºC to 66ºC (32ºF to 150ºF) *Synthetic Rubber Adhesive Choose from adhesive-backed, epoxy or screw mounting bases! Available in a variety of materials for both indoor and outdoor use

More information

2006 Codes. Please verify the following before calling for inspection

2006 Codes. Please verify the following before calling for inspection INSPECTION CHECKLIST RESIDENTIAL PLUMBING ROUGH IN 2006 Codes This checklist is intended for use to prepare for an inspection. This is only a general list and is not intended to address all possible conditions.

More information

3M Thermally Conductive Adhesive Transfer Tapes

3M Thermally Conductive Adhesive Transfer Tapes Technical Data July 215 3M Thermally Conductive Adhesive Transfer Tapes 885 881 8815 882 Product Description 885, 881, 8815 and 882 are designed to provide a preferential heat-transfer path between heat-generating

More information

COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK

COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK [METRIC] A-A-59136 28 OCTOBER 1997 SUPERSEDING PPP-C-1752D(3) 1 FEBRUARY 1993 COMMERCIAL ITEM DESCRIPTION CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK The General Services Administration has

More information

C A B L E P R O T E C T I O N

C A B L E P R O T E C T I O N Safe cable protection! Elematic Cabling Systems produces in own plants a wide range of products for the cable protection, such as wiring spirals, insulated tubing, heat shrinkable tubing, etc. These products

More information

SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant

SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance

More information

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts

More information

TECHNICAL DATA SHEET GRILON BG-15 S

TECHNICAL DATA SHEET GRILON BG-15 S TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy

More information

Dubai Municipality Standard DMS 1: Part 5: 2004

Dubai Municipality Standard DMS 1: Part 5: 2004 Specification for precast concrete blocks Part 5: Normal-weight concrete-polystyrene sandwich masonry blocks Issue Date Revision Revision Description Prepared by Approved by Authorized by 19/12/2004 Issue

More information

s ation lic app ntial Foamular sideor RE uide F Ily G am ation F sul In

s ation lic app ntial Foamular sideor RE uide F Ily G am ation F sul In Family GUIDE FOR RESIDENTIAL applications Foamular Where quality and performance make a home The OWENS CORNING FOAMULAR XPS INSULATION FAMILY ALBUM is a critical feature of any home impacting overall comfort

More information

TEXAS A&M CENTRAL ACADEMIC BUILDIING & PATRIOT S CASA SUBMITTAL. 23 21 13.19 Pre-Insulated Piping 4-8-13

TEXAS A&M CENTRAL ACADEMIC BUILDIING & PATRIOT S CASA SUBMITTAL. 23 21 13.19 Pre-Insulated Piping 4-8-13 TEXAS A&M CENTRAL ACADEMIC BUILDIING & PATRIOT S CASA SUBMITTAL 23 21 13.19 Pre-Insulated Piping 4-8-13 MATERIAL SUBMITTAL JOB NAME: TEXAS A&M SAN ANTONIO CENTRAL ACADEMIC BUILDING & PATRIOTS CASA CONTRACTOR:

More information

GUIDELINE SPECIFICATIONS

GUIDELINE SPECIFICATIONS GUIDELINE SPECIFICATIONS GORDON SOFFIT-SHIELD - An Exterior Metal Soffit System DIVISION 05 5800 or DIVISION 07 7700 Note To Specifier: SOFFIT-SHIELD should be installed by tradesmen that are experienced

More information

APPENDIX C MOISTURE GUIDELINES & MOISTURE TESTING

APPENDIX C MOISTURE GUIDELINES & MOISTURE TESTING APPENDIX C MOISTURE GUIDELINES & MOISTURE TESTING Appendix C Moisture Guidelines Determining moisture content is an essential part of quality control within the flooring installation process. Flooring

More information

SECTION 07550 - MODIFIED BITUMINOUS MEMBRANE ROOFING. A. Vapor barrier (base ply); cover board at existing roof deck.

SECTION 07550 - MODIFIED BITUMINOUS MEMBRANE ROOFING. A. Vapor barrier (base ply); cover board at existing roof deck. SECTION 07550 - PART I GENERAL 1.01 SECTION INCLUDES A. Vapor barrier (base ply); cover board at existing roof deck. B. Roof insulation at new roof deck. C. Modified bitumen membrane. D. Fluid applied

More information

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels

More information

- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner

- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional

More information

30 minutes in class, 2 hours to make the first time

30 minutes in class, 2 hours to make the first time Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12

More information

4 Installation Requirements

4 Installation Requirements 4 Installation Requirements 9 4.1 Code Reference The authority having jurisdiction should be referenced to determine what law, ordinance or code shall apply in the use of flexible duct. Ducts conforming

More information

CONSTRUCTION CHECKLIST Residential Plumbing Rough-In September 2004

CONSTRUCTION CHECKLIST Residential Plumbing Rough-In September 2004 Bellevue Bothell Kenmore Kirkland Issaquah Mercer Island Sammamish Snoqualmie Woodinville CONSTRUCTION CHECKLIST Residential Plumbing Rough-In September 2004 This checklist is intended for use to prepare

More information

Terminal Cleaning and Protection

Terminal Cleaning and Protection Terminal Cleaning and Protection East Penn offers the most complete line of terminal cleaning and protection products. Boots Heat Shrink Tubing Cleaner and Protection Sprays Terminal Protectors 33 PAGES

More information

Formwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.

Formwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co. Joint Fillers Formwork Direct are proud to be The UK and Ireland distributor for LJA Miers & Co. who have been responsible for many of the developments in Joint Fillers that are today accepted as common

More information

Pipe and Equipment Insulations. Zeston. PVC Insulated Fitting Covers Installation Instructions for Hot, Cold and USDA Piping Systems

Pipe and Equipment Insulations. Zeston. PVC Insulated Fitting Covers Installation Instructions for Hot, Cold and USDA Piping Systems Pipe and Equipment Insulations Zeston PVC Insulated Fitting Covers Installation Instructions for Hot, Cold and USDA Piping Systems Zeston PVC Insulated Fitting Covers Installation Instructions for Hot,

More information

Tubing and Accessories

Tubing and Accessories Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3

More information

The entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35

The entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35 Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: NOVEMBER 2012 Last EDITORIAL Change: JANUARY 2013

More information

SECTION 07 21 16 - PRE-ENGINEERED BUILDING BLANKET INSULATION

SECTION 07 21 16 - PRE-ENGINEERED BUILDING BLANKET INSULATION PROJECT ARCHITECT RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Building Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings

Building Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings BUILDING ENVELOPE DESIGN BY ROXUL Building Envelope Design by Roxul (BEDR ) FireWall and Roxul Plus MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB Exterior

More information

INSTALLATION INSTRUCTIONS BL-8704

INSTALLATION INSTRUCTIONS BL-8704 INSTALLATION INSTRUCTIONS BL-8704 EXPOSED BLACK LEVER THERMOSTATIC MIXING VALVE WITH RISER KIT, HANDSET, LEVER DIVERTER, 8 ROSE AND ADJUSTABLE RISER PIPE BRACKET. Dimensions in Inches (& Millimetres) 1

More information

INSULATION FOR PRE-ENGINEERED METAL BUILDINGS. ROXUL SAFE 55 & 65 and ROXUL PLUS MB. Insulation for Pre-Engineered Metal Buildings

INSULATION FOR PRE-ENGINEERED METAL BUILDINGS. ROXUL SAFE 55 & 65 and ROXUL PLUS MB. Insulation for Pre-Engineered Metal Buildings INSULATION FOR PRE-ENGINEERED METAL BUILDINGS ROXUL SAFE 55 & 65 and ROXUL PLUS MB Insulation for Pre-Engineered Metal Buildings ROXUL SAFE AND ROXUL PLUS MB Exterior Wall Insulation for Pre-Engineered

More information

INSPECTION CHECKLIST Residential Plumbing Rough In April 2011 Mercer Island Mill Creek Sammamish Snohomish County Snoqualmie Woodinville

INSPECTION CHECKLIST Residential Plumbing Rough In April 2011 Mercer Island Mill Creek Sammamish Snohomish County Snoqualmie Woodinville Bellevue Bothell Burien Issaquah Kenmore Kirkland INSPECTION CHECKLIST Residential Plumbing Rough In April 2011 Mercer Island Mill Creek Sammamish Snohomish County Snoqualmie Woodinville 2009 Codes This

More information

COMMERCIAL BUILDING APPLICATIONS

COMMERCIAL BUILDING APPLICATIONS EXPANDED POLYSTYRENE FOR COMMERCIAL BUILDING APPLICATIONS www.falconfoam.com Commercial Building Ap Expanded Polystyrene Insulation Falcon Foam leads the commercial building industry with products that

More information

SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT

SECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT SECTION 230529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.

More information

1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated.

1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated. CAST IN PLACE DETECTABLE/TACTILE WARNING SURFACE TILE PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Special Conditions and Division 1 Specifications

More information

3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin

3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin 3M Scotchcast Electrical Resin 251 Two-Part, Oven-Curing, Class F, Rigid, Filled, Epoxy Liquid Resin Data Sheet April 2013 Description 3M Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class

More information

Building Envelope Design using ROXUL. FIREWALL and ROXUL PLUS MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings

Building Envelope Design using ROXUL. FIREWALL and ROXUL PLUS MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings Building Envelope Design using ROXUL Building Envelope Design using ROXUL (BEDR ) FIREWALL and ROXUL PLUS MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB

More information

PAAM COMMERCIAL PRIVATE LIMITED

PAAM COMMERCIAL PRIVATE LIMITED METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal

More information

Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing

Schlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight

More information

COATING & WRAPPING OF UNDERGROUND PIPING

COATING & WRAPPING OF UNDERGROUND PIPING CONSTRUCTION STANDARD SPECIFICATION DOCUMENT NO :SEC-PJ-000-SPC-PI-008 TOTAL PAGES : 8 Page 1 of 8 CONTENTS 1. SCOPE 2. DEFINITION 3. CODES AND STANDARDS 4. MATERIALS Page 2 of 8 1. SCOPE This specification

More information

Please read the entire document before purchasing and installing any of these products

Please read the entire document before purchasing and installing any of these products Please read the entire document before purchasing and installing any of these products USA SBS UNDERLAYMENT ROOFING UNDERLAYMENT SBS Mineral Surfaced MINERAL SURFACE CAP SHEET Ice and Water Protection

More information

STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM

STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM Installed in Pre-engineered Steel Buildings Provides Lowest Cost Construction Method for CORROSIVE AND WET Environments PREFERRED SOLUTIONS, INC.

More information

PRO PANELS. 1-800-525-4159 www.propanels.com. the artist s choice in display designed by artists, for artists. voice: 214-350-5765 fax: 214-350-7372

PRO PANELS. 1-800-525-4159 www.propanels.com. the artist s choice in display designed by artists, for artists. voice: 214-350-5765 fax: 214-350-7372 PRO PANELS by MD Enterprises the artist s choice in display designed by artists, for artists 1-800-525-4159 www.propanels.com voice: 214-350-5765 fax: 214-350-7372 MD Enterprises 1-800-525-4159 voice:

More information

GreenGuard Housewrap Installation Guide

GreenGuard Housewrap Installation Guide 000768PACBPHW_Flashing Bro 5/23/03 2:52 PM Page 1 For the most current product information, go to www.green-guard.com. Pactiv Building Products believes the information and recommendations herein to be

More information

SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS

SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS PART 1 GENERAL SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS 1.1 SUMMARY A. Optically clear dual reflective, neutral sputtered and aluminum metallized polyester film for solar control. 1.2 RELATED

More information

FLAT ROOF REPAIR CUT COST WITHOUT CUTTING CORNERS

FLAT ROOF REPAIR CUT COST WITHOUT CUTTING CORNERS FLAT ROOF REPAIR CUT COST WITHOUT CUTTING CORNERS Table of Contents Chapter 1: FLAT ROOF REPAIR - CUT COST WITHOUT CUTTING CORNERS Chapter 2: PVC RECOVER SYSTEM HOW IT WORKS Chapter 3: 8 STRATEGIES TO

More information

security products metric sizes Redefine your comfort zone. www.titus-hvac.com

security products metric sizes Redefine your comfort zone. www.titus-hvac.com metric sizes secure lethal objects monitoring areas suicide deterrent Redefine your comfort zone. www.titus-hvac.com humid areas prevents corrosion minimum security medium security maximum security Table

More information

SECTION 07 61 13 STANDING SEAM METAL ROOFING

SECTION 07 61 13 STANDING SEAM METAL ROOFING SECTION 07 61 13 STANDING SEAM METAL ROOFING PART 1 GENERAL 1.01 SCOPE OF WORK A. The Work shall include all labor, materials, equipment and supervision required to complete the work of the above referenced

More information

Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL

Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL CONTENTS About Schlegel 3 Q-Lon Profiles PVC doors, windows and roller shutters 6 Timber doors and windows

More information

FOAMULAR LT40, 400 and 600 insulations with minimum compressive strengths of

FOAMULAR LT40, 400 and 600 insulations with minimum compressive strengths of Technical Guide FOAMULAR Extruded Polystyrene Insulation For Cold Storage Applications FOAMULAR extruded polystyrene insulation is suitable for virtually all cold storage insulating needs, including floors,

More information

Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet

Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses

More information

CONTROL METHODS. There are five ways to control the release of asbestos fibers:

CONTROL METHODS. There are five ways to control the release of asbestos fibers: Control Methods CONTROL METHODS When asbestos containing materials are found in a building, the owner must decide which method or methods will be used to deal with the asbestos. The decision will be based

More information

World Leaders in Polycarbonate Film Technology, Performance, and Optics

World Leaders in Polycarbonate Film Technology, Performance, and Optics World Leaders in Polycarbonate Film Technology, Performance, and Optics Achieving Higher Levels of Innovation and Excellence in Film Applications with Makrofol and Bayfol Polycarbonate Films Makrofol and

More information

19 DYNAmax Free Standing Server C A B I N E T s

19 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide

More information

EcoTouch Insulation with PureFiber Technology

EcoTouch Insulation with PureFiber Technology PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.

More information

19 DYNAmax Free Standing Server C A B I N E T s

19 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide

More information

LAYING BLOCK AND BRICK

LAYING BLOCK AND BRICK LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct

More information

Sikaflex Sealant Installation. Sika Corporation

Sikaflex Sealant Installation. Sika Corporation Sikaflex Sealant Installation 1 Critical Success Factors Substrate preparation If done properly would probably eliminate 95% of all call backs Most common mode of sealant failure Must remove all weak material

More information

RTV159. RTV157 and RTV159 High Strength Silicone Adhesive Sealants

RTV159. RTV157 and RTV159 High Strength Silicone Adhesive Sealants RTV159 RTV157 and RTV159 High Strength Silicone Adhesive Sealants Product Description RTV157 and RTV159 are one-component, ready-to-use, high strength silicone rubber adhesive sealants. They cure to tough

More information

Shower and Floor Gullies Channel Drain and Tile Drain SECTION

Shower and Floor Gullies Channel Drain and Tile Drain SECTION Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions

More information

Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies

Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road

More information

All work shall comply with applicable codes and ordinances. Work shall comply with the BOCA National Plumbing Code, latest edition.

All work shall comply with applicable codes and ordinances. Work shall comply with the BOCA National Plumbing Code, latest edition. DIVISION 15 MECHANICAL SECTION 15100 - PLUMBING PART 1 - GENERAL SCOPE Plumbing work includes all domestic water, gas, and sanitary sewer systems as shown on plans. Also all fixtures and equipment which

More information

External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902

External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902 External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water

More information